//
// Copyright (C) 2002-2007 International Business Machines Corporation
// and others. All rights reserved.
//
// file: regeximp.h
//
// ICU Regular Expressions,
// Definitions of constant values used in the compiled form of
// a regular expression pattern.
//
#ifndef _REGEXIMP_H
#define _REGEXIMP_H
#include "cmemory.h"
U_NAMESPACE_BEGIN
#ifdef REGEX_DEBUG /* For debugging, define REGEX_DEBUG in regex.h, not here in this file. */
//
// debugging options. Enable one or more of the three #defines immediately following
//
//#define REGEX_SCAN_DEBUG
#define REGEX_DUMP_DEBUG
#define REGEX_RUN_DEBUG
// End of #defines inteded to be directly set.
#include <stdio.h>
#endif
#ifdef REGEX_SCAN_DEBUG
#define REGEX_SCAN_DEBUG_PRINTF(a) printf a
#else
#define REGEX_SCAN_DEBUG_PRINTF(a)
#endif
#ifdef REGEX_DUMP_DEBUG
#define REGEX_DUMP_DEBUG_PRINTF(a) printf a
#else
#define REGEX_DUMP_DEBUG_PRINTF(a)
#endif
#ifdef REGEX_RUN_DEBUG
#define REGEX_RUN_DEBUG_PRINTF(a) printf a
#define REGEX_DUMP_DEBUG_PRINTF(a) printf a
#else
#define REGEX_RUN_DEBUG_PRINTF(a)
#endif
//
// Opcode types In the compiled form of the regexp, these are the type, or opcodes,
// of the entries.
//
enum {
URX_RESERVED_OP = 0, // For multi-operand ops, most non-first words.
URX_RESERVED_OP_N = 255, // For multi-operand ops, negative operand values.
URX_BACKTRACK = 1, // Force a backtrack, as if a match test had failed.
URX_END = 2,
URX_ONECHAR = 3, // Value field is the 21 bit unicode char to match
URX_STRING = 4, // Value field is index of string start
URX_STRING_LEN = 5, // Value field is string length (code units)
URX_STATE_SAVE = 6, // Value field is pattern position to push
URX_NOP = 7,
URX_START_CAPTURE = 8, // Value field is capture group number.
URX_END_CAPTURE = 9, // Value field is capture group number
URX_STATIC_SETREF = 10, // Value field is index of set in array of sets.
URX_SETREF = 11, // Value field is index of set in array of sets.
URX_DOTANY = 12,
URX_JMP = 13, // Value field is destination position in
// the pattern.
URX_FAIL = 14, // Stop match operation, No match.
URX_JMP_SAV = 15, // Operand: JMP destination location
URX_BACKSLASH_B = 16, // Value field: 0: \b 1: \B
URX_BACKSLASH_G = 17,
URX_JMP_SAV_X = 18, // Conditional JMP_SAV,
// Used in (x)+, breaks loop on zero length match.
// Operand: Jmp destination.
URX_BACKSLASH_X = 19,
URX_BACKSLASH_Z = 20, // \z Unconditional end of line.
URX_DOTANY_ALL = 21, // ., in the . matches any mode.
URX_BACKSLASH_D = 22, // Value field: 0: \d 1: \D
URX_CARET = 23, // Value field: 1: multi-line mode.
URX_DOLLAR = 24, // Also for \Z
URX_CTR_INIT = 25, // Counter Inits for {Interval} loops.
URX_CTR_INIT_NG = 26, // 2 kinds, normal and non-greedy.
// These are 4 word opcodes. See description.
// First Operand: Data loc of counter variable
// 2nd Operand: Pat loc of the URX_CTR_LOOPx
// at the end of the loop.
// 3rd Operand: Minimum count.
// 4th Operand: Max count, -1 for unbounded.
URX_DOTANY_UNIX = 27, // '.' operator in UNIX_LINES mode, only \n marks end of line.
URX_CTR_LOOP = 28, // Loop Ops for {interval} loops.
URX_CTR_LOOP_NG = 29, // Also in three flavors.
// Operand is loc of corresponding CTR_INIT.
URX_CARET_M_UNIX = 30, // '^' operator, test for start of line in multi-line
// plus UNIX_LINES mode.
URX_RELOC_OPRND = 31, // Operand value in multi-operand ops that refers
// back into compiled pattern code, and thus must
// be relocated when inserting/deleting ops in code.
URX_STO_SP = 32, // Store the stack ptr. Operand is location within
// matcher data (not stack data) to store it.
URX_LD_SP = 33, // Load the stack pointer. Operand is location
// to load from.
URX_BACKREF = 34, // Back Reference. Parameter is the index of the
// capture group variables in the state stack frame.
URX_STO_INP_LOC = 35, // Store the input location. Operand is location
// within the matcher stack frame.
URX_JMPX = 36, // Conditional JMP.
// First Operand: JMP target location.
// Second Operand: Data location containing an
// input position. If current input position ==
// saved input position, FAIL rather than taking
// the JMP
URX_LA_START = 37, // Starting a LookAround expression.
// Save InputPos and SP in static data.
// Operand: Static data offset for the save
URX_LA_END = 38, // Ending a Lookaround expression.
// Restore InputPos and Stack to saved values.
// Operand: Static data offset for saved data.
URX_ONECHAR_I = 39, // Test for case-insensitive match of a literal character.
// Operand: the literal char.
URX_STRING_I = 40, // Case insensitive string compare.
// First Operand: Index of start of string in string literals
// Second Operand (next word in compiled code):
// the length of the string.
URX_BACKREF_I = 41, // Case insensitive back reference.
// Parameter is the index of the
// capture group variables in the state stack frame.
URX_DOLLAR_M = 42, // $ in multi-line mode.
URX_CARET_M = 43, // ^ in multi-line mode.
URX_LB_START = 44, // LookBehind Start.
// Paramater is data location
URX_LB_CONT = 45, // LookBehind Continue.
// Param 0: the data location
// Param 1: The minimum length of the look-behind match
// Param 2: The max length of the look-behind match
URX_LB_END = 46, // LookBehind End.
// Parameter is the data location.
// Check that match ended at the right spot,
// Restore original input string len.
URX_LBN_CONT = 47, // Negative LookBehind Continue
// Param 0: the data location
// Param 1: The minimum length of the look-behind match
// Param 2: The max length of the look-behind match
// Param 3: The pattern loc following the look-behind block.
URX_LBN_END = 48, // Negative LookBehind end
// Parameter is the data location.
// Check that the match ended at the right spot.
URX_STAT_SETREF_N = 49, // Reference to a prebuilt set (e.g. \w), negated
// Operand is index of set in array of sets.
URX_LOOP_SR_I = 50, // Init a [set]* loop.
// Operand is the sets index in array of user sets.
URX_LOOP_C = 51, // Continue a [set]* or OneChar* loop.
// Operand is a matcher static data location.
// Must always immediately follow LOOP_x_I instruction.
URX_LOOP_DOT_I = 52, // .*, initialization of the optimized loop.
// Operand value:
// bit 0:
// 0: Normal (. doesn't match new-line) mode.
// 1: . matches new-line mode.
// bit 1: controls what new-lines are recognized by this operation.
// 0: All Unicode New-lines
// 1: UNIX_LINES, \u000a only.
URX_BACKSLASH_BU = 53, // \b or \B in UREGEX_UWORD mode, using Unicode style
// word boundaries.
URX_DOLLAR_D = 54, // $ end of input test, in UNIX_LINES mode.
URX_DOLLAR_MD = 55 // $ end of input test, in MULTI_LINE and UNIX_LINES mode.
};
// Keep this list of opcode names in sync with the above enum
// Used for debug printing only.
#define URX_OPCODE_NAMES \
" ", \
"BACKTRACK", \
"END", \
"ONECHAR", \
"STRING", \
"STRING_LEN", \
"STATE_SAVE", \
"NOP", \
"START_CAPTURE", \
"END_CAPTURE", \
"URX_STATIC_SETREF", \
"SETREF", \
"DOTANY", \
"JMP", \
"FAIL", \
"JMP_SAV", \
"BACKSLASH_B", \
"BACKSLASH_G", \
"JMP_SAV_X", \
"BACKSLASH_X", \
"BACKSLASH_Z", \
"DOTANY_ALL", \
"BACKSLASH_D", \
"CARET", \
"DOLLAR", \
"CTR_INIT", \
"CTR_INIT_NG", \
"DOTANY_UNIX", \
"CTR_LOOP", \
"CTR_LOOP_NG", \
"URX_CARET_M_UNIX", \
"RELOC_OPRND", \
"STO_SP", \
"LD_SP", \
"BACKREF", \
"STO_INP_LOC", \
"JMPX", \
"LA_START", \
"LA_END", \
"ONECHAR_I", \
"STRING_I", \
"BACKREF_I", \
"DOLLAR_M", \
"CARET_M", \
"LB_START", \
"LB_CONT", \
"LB_END", \
"LBN_CONT", \
"LBN_END", \
"STAT_SETREF_N", \
"LOOP_SR_I", \
"LOOP_C", \
"LOOP_DOT_I", \
"BACKSLASH_BU", \
"DOLLAR_D", \
"DOLLAR_MD"
//
// Convenience macros for assembling and disassembling a compiled operation.
//
#define URX_BUILD(type, val) (int32_t)((type << 24) | (val))
#define URX_TYPE(x) ((uint32_t)(x) >> 24)
#define URX_VAL(x) ((x) & 0xffffff)
//
// Access to Unicode Sets composite character properties
// The sets are accessed by the match engine for things like \w (word boundary)
//
enum {
URX_ISWORD_SET = 1,
URX_ISALNUM_SET = 2,
URX_ISALPHA_SET = 3,
URX_ISSPACE_SET = 4,
URX_GC_NORMAL, // Sets for finding grapheme cluster boundaries.
URX_GC_EXTEND,
URX_GC_CONTROL,
URX_GC_L,
URX_GC_LV,
URX_GC_LVT,
URX_GC_V,
URX_GC_T,
URX_LAST_SET,
URX_NEG_SET = 0x800000 // Flag bit to reverse sense of set
// membership test.
};
//
// Match Engine State Stack Frame Layout.
//
struct REStackFrame {
int32_t fInputIdx; // Position of next character in the input string
int32_t fPatIdx; // Position of next Op in the compiled pattern
int32_t fExtra[2]; // Extra state, for capture group start/ends
// atomic parentheses, repeat counts, etc.
// Locations assigned at pattern compile time.
};
//
// Start-Of-Match type. Used by find() to quickly scan to positions where a
// match might start before firing up the full match engine.
//
enum StartOfMatch {
START_NO_INFO, // No hint available.
START_CHAR, // Match starts with a literal code point.
START_SET, // Match starts with something matching a set.
START_START, // Match starts at start of buffer only (^ or \A)
START_LINE, // Match starts with ^ in multi-line mode.
START_STRING // Match starts with a literal string.
};
#define START_OF_MATCH_STR(v) ((v)==START_NO_INFO? "START_NO_INFO" : \
(v)==START_CHAR? "START_CHAR" : \
(v)==START_SET? "START_SET" : \
(v)==START_START? "START_START" : \
(v)==START_LINE? "START_LINE" : \
(v)==START_STRING? "START_STRING" : \
"ILLEGAL")
//
// 8 bit set, to fast-path latin-1 set membership tests.
//
struct Regex8BitSet : public UMemory {
inline Regex8BitSet();
inline void operator = (const Regex8BitSet &s);
inline void init(const UnicodeSet *src);
inline UBool contains(UChar32 c);
inline void add(UChar32 c);
int8_t d[32];
};
inline Regex8BitSet::Regex8BitSet() {
uprv_memset(d, 0, sizeof(d));
}
inline UBool Regex8BitSet::contains(UChar32 c) {
// No bounds checking! This is deliberate.
return ((d[c>>3] & 1 <<(c&7)) != 0);
}
inline void Regex8BitSet::add(UChar32 c) {
d[c>>3] |= 1 << (c&7);
}
inline void Regex8BitSet::init(const UnicodeSet *s) {
if (s != NULL) {
for (int32_t i=0; i<=255; i++) {
if (s->contains(i)) {
this->add(i);
}
}
}
}
inline void Regex8BitSet::operator = (const Regex8BitSet &s) {
uprv_memcpy(d, s.d, sizeof(d));
}
U_NAMESPACE_END
#endif