Html程序  |  898行  |  20.21 KB

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">

<html>
  <head>
    <title>Dalvik bytecode constraints</title>
    <link rel=stylesheet href="dalvik-constraints.css">
  </head>
  
  <body>
  
    <h1>Dalvik bytecode constraints</h1>
  
<!--
    <h1>General integrity constraints</h1>

    <table>
      <tr>
        <th>
          Identifier
        </th>
        
        <th>
          Description
        </th>
      </tr>
  
      <tr>
        <td>
          A1
        </td>
        
        <td>
          The magic number of the DEX file must be "dex\n035\0".
        </td>
      </tr>

      <tr>
        <td>
          A1
        </td>
        
        <td>
          The checksum must be an Adler-32 checksum of the whole file contents
          except magic and checksum field.
        </td>
      </tr>


The signature must be a SHA-1 hash of the whole file contents except magic,
checksum, and signature.

The file_size must match the actual file size in bytes.

The header_size must have the value 0x70.

The endian_tag must have either the value ENDIAN_CONSTANT or
REVERSE_ENDIAN_CONSTANT.   
 
For each of the link, string_ids, type_ids, proto_ids, field_ids, method_ids, class_defs
and data sections, the offset and size fields must be either both zero or both
non-zero. In the latter case, the offset must be four-byte-aligned.

All offset fields in the header except map_off must be four-byte-aligned.
 
The map_off field must be either zero or point into the data section. In the
latter case, the data section must exist.

None of the link, string_ids, type_ids, proto_ids, field_ids, method_ids, class_defs
and data sections must overlap each other or the header.

If a map exists, then each map entry must have a valid type. Each type may
appear at most once.

If a map exists, then each map entry must have a nonzero offset and size. The
offset must point into the corresponding section of the file (i.e. a
string_id_item must point into the string_ids section) and the explicit or
implicit size of the item must match the actual contents and size of the
section.

If a map exists, then the offset of map entry n+1 must be greater or equal to
the offset of map entry n plus then size of map entry n. This implies
non-overlapping entries and low-to-high ordering.

The following types of entries must have an offset that is
four-byte-aligned: string_id_item, type_id_item, proto_id_item, field_id_item,
method_id_item, class_def_item, type_list, code_item,
annotations_directory_item.

For each string_id_item, the string_data_off field must contain a valid
reference into the data section. For the referenced string_data_item, the data
field must contain a valid MUTF-8 string, and the utf16_size must match the
decoded length of the string.

For each type_id_item, the desciptor_idx field must contain a valid reference
into the string_ids list. The referenced string must be a valid type descriptor.

For each proto_id_item, the shorty_idx field must contain a valid reference
into the string_ids list. The referenced string must be a valid shorty descriptor.
Also, the return_type_idx field must be a valid index into the type_ids section,
and the parameters_off field must be either zero or a valid offset pointing
into the data section. If nonzero, the parameter list must not contain any void
entries.

For each field_id_item, both the class_idx and type_idx fields must be a valid
 indices into the
type_ids list. The entry referenced by class_idx must be a non-array reference type.
In addition, the name_idx field must be a valid reference into the string_ids
section, and the contents of the referenced entry must conform to the MemberName
specification.

For each method_id_item, the class_idx field must be a valid index into the
type_ids section, and the
referenced entry must be a non-array reference type. The proto_id field must
be a valid reference into the proto_ids list. The name_idx field must be a
valid reference into the string_ids
section, and the contents of the referenced entry must conform to the MemberName
specification.

For each class_def_item, ...

For each field_id_item, the class_idx field must be a valid index into the
type_ids list. The referenced entry must be a non-array reference type.

...

-->
 
    <h2>
      Static constraints
    </h2>

    <p>
    Static constraints are constraints on individual elements of the bytecode.
    They usually can be checked without employing control or data-flow analysis
    techniques.
    </p>
  
    <table>
      <tr>
        <th>
          Identifier
        </th>
        
        <th>
          Description
        </th>
        
        <th>
          Spec equivalent
        </th>
      </tr>
  
      <tr>
        <td>
          A1
        </td>
        
        <td>
          The <code>insns</code> array must not be empty. 
        </td>
  
        <td>
          4.8.1.1
        </td>
      </tr>
      
      <tr>
        <td>
          A2
        </td>
        
        <td>
          The first opcode in the <code>insns</code> array must have index zero.
        </td>
  
        <td>
          4.8.1.3
        </td>
      </tr>
      
      <tr>
        <td>
          A3
        </td>
        
        <td>
          The <code>insns</code> array must only contain valid Dalvik opcodes.
        </td>
  
        <td>
          4.8.1.4
        </td>
      </tr>
      
      <tr>
        <td>
          A4
        </td>
        
        <td>
          The index of instruction <code>n+1</code> must equal the index of
          instruction <code>n</code> plus the length of instruction
          <code>n</code>, taking into account possible operands.
        </td>
  
        <td>
          4.8.1.5
        </td>
      </tr>
      
      <tr>
        <td>
          A5
        </td>
        
        <td>
          The last instruction in the <code>insns</code> array must end at index
          <code>insns_size-1</code>.   
        </td>
  
        <td>
          4.8.1.6
        </td>
      </tr>
      
      <tr>
        <td>
          A6
        </td>
        
        <td>
          All <code>goto</code> and <code>if-&lt;kind&gt;</code> targets must
          be opcodes within in the same method.
        </td>
  
        <td>
          4.8.1.7
        </td>
      </tr>
      
      <tr>
        <td>
          A7
        </td>
        
        <td>
          All targets of a <code>packed-switch</code> instruction must be
          opcodes within in the same method. The size and the list of targets
          must be consistent. 
        </td>
  
        <td>
          4.8.1.8
        </td>
      </tr>
          
      <tr>
        <td>
          A8
        </td>
        
        <td>
          All targets of a <code>sparse-switch</code> instruction must be
          opcodes within in the same method. The corresponding table must be
          consistent and sorted low-to-high. 
        </td>
  
        <td>
          4.8.1.9
        </td>
      </tr>
      
      <tr>
        <td>
          A9
        </td>
        
        <td>
          The <code>B</code> operand of the <code>const-string</code> and
          <code>const-string/jumbo</code> instructions must be a valid index
          into the string constant pool.
        </td>
  
        <td>
          4.8.1.10
        </td>
      </tr>

      <tr>
        <td>
          A10
        </td>
        
        <td>
          The <code>C</code> operand of the <code>iget&lt;kind&gt;</code> and
          <code>iput&lt;kind&gt;</code> instructions must be a valid index into
          the field constant pool. The referenced entry must represent an
          instance field.
        </td>
  
        <td>
          4.8.1.12
        </td>
      </tr>
      
      <tr>
        <td>
          A11
        </td>
        
        <td>
          The <code>C</code> operand of the <code>sget&lt;kind&gt;</code> and
          <code>sput&lt;kind&gt;</code> instructions must be a valid index into
          the field constant pool. The referenced entry must represent a static
          field.
        </td>
  
        <td>
          4.8.1.12
        </td>
      </tr>

      <tr>
        <td>
          A12
        </td>
        
        <td>
          The <code>C</code> operand of the <code>invoke-virtual</code>,
          <code>invoke-super</code>, <code<invoke-direct</code> and
          <code>invoke-static</code> instructions must be a valid index into the
          method constant pool. In all cases, the referenced
          <code>method_id</code> must belong to a class (not an interface). 
        </td>
  
        <td>
          4.8.1.13
        </td>
      </tr>
      
      <tr>
        <td>
          A13
        </td>
        
        <td>
          The <code>B</code> operand of the <code>invoke-virtual/range</code>,
          <code>invoke-super/range</code>, <code>invoke-direct/range</code>, and
          <code>invoke-static/range</code> instructions must be a valid index
          into the method constant pool. In all cases, the referenced
          <code>method_id</code> must belong to a class (not an interface). 
        </td>
  
        <td>
          4.8.1.13
        </td>
      </tr>

      <tr>
        <td>
          A14
        </td>
        
        <td>
          A method the name of which starts with a '<' must only be invoked
          implicitly by the VM, not by code originating from a Dex file. The
          only exception is the instance initializer, which may be invoked by
          <code>invoke-direct</code>.
        </td>
  
        <td>
          4.8.1.14
        </td>
      </tr>
      
      <tr>
        <td>
          A15
        </td>
        
        <td>
          The <code>C</code> operand of the <code>invoke-interface</code>
          instruction must be a valid index into the method constant pool. The
          referenced <code>method_id</code> must belong to an interface (not a
          class).
        </td>
  
        <td>
          4.8.1.15
        </td>
      </tr>
  
      <tr>
        <td>
          A16
        </td>
        
        <td>
          The <code>B</code> operand of the <code>invoke-interface/range</code>
          instruction must be a valid index into the method constant pool.
          The referenced <code>method_id</code> must belong to an interface (not
          a class).
        </td>
  
        <td>
          4.8.1.15
        </td>
      </tr>
  
      <tr>
        <td>
          A17
        </td>
        
        <td>
          The <code>B</code> operand of the <code>const-class</code>,
          <code>check-cast</code>, <code>new-instance</code>, and
          <code>filled-new-array/range</code> instructions must be a valid index
          into the type constant pool.
        </td>
  
        <td>
          4.8.1.16
        </td>
      </tr>
  
      <tr>
        <td>
          A18
        </td>
        
        <td>
          The <code>C</code> operand of the <code>instance-of</code>,
          <code>new-array</code>, and <code>filled-new-array</code>
          instructions must be a valid index into the type constant pool.
        </td>
  
        <td>
          4.8.1.16
        </td>
      </tr>

     <tr>
        <td>
          A19
        </td>
        
        <td>
          The dimensions of an array created by a <code>new-array</code>
          instruction must be less than <code>256</code>.
        </td>
  
        <td>
          4.8.1.17
        </td>
      </tr>
  
      <tr>
        <td>
          A20
        </td>
        
        <td>
          The <code>new</code> instruction must not refer to array classes,
          interfaces, or abstract classes.
        </td>
  
        <td>
          4.8.1.18
        </td>
      </tr>
  
      <tr>
        <td>
          A21
        </td>
        
        <td>
          The type referred to by a <code>new-array</code> instruction must be
          a valid, non-reference type.
        </td>
  
        <td>
          4.8.1.20
        </td>
      </tr>
  
      <tr>
        <td>
          A22
        </td>
        
        <td>
          All registers referred to by an instruction in a single-width
          (non-pair) fashion must be valid for the current method. That is,
          their indices must be non-negative and smaller than
          <code>registers_size</code>. 
        </td>
  
        <td>
          4.8.1.21
        </td>
      </tr>
  
      <tr>
        <td>
          A23
        </td>
        
        <td>
          All registers referred to by an instruction in a double-width (pair)
          fashion must be valid for the current method. That is, their indices
          must be non-negative and smaller than <code>registers_size-1</code>. 
        </td>
  
        <td>
          4.8.1.23
        </td>
      </tr>
    </table>
      
    <h2>
      Structural constraints
    </h2>
  
    <p>
    Structural constraints are constraints on relationships between several
    elements of the bytecode. They usually can't be checked without employing
    control or data-flow analysis techniques.
    </p>

    <table>
      <tr>
        <th>
          Identifier
        </th>
        
        <th>
          Description
        </th>
        
        <th>
          Spec equivalent
        </th>
      </tr>
  
      <tr>
        <td>
          B1
        </td>
        
        <td>
          The number and types of arguments (registers and immediate values)
          must always match the instruction.
        </td>
  
        <td>
          4.8.2.1
        </td>
      </tr>
  
      <tr>
        <td>
          B2
        </td>
        
        <td>
          Register pairs must never be broken up. 
        </td>
  
        <td>
          4.8.2.3
        </td>
      </tr>
  
      <tr>
        <td>
          B3
        </td>
        
        <td>
          A register (or pair) has to be assigned first before it can be
          read.
        </td>
  
        <td>
          4.8.2.4
        </td>
      </tr>
  
      <tr>
        <td>
          B4
        </td>
        
        <td>
          An <code>invoke-direct</code> instruction must only invoke an instance
          initializer or a method in the current class or one of its
          superclasses. 
        </td>
  
        <td>
          4.8.2.7
        </td>
      </tr>
  
      <tr>
        <td>
          B5
        </td>
        
        <td>
          An instance initializer must only be invoked on an uninitialized
          instance.
        </td>
  
        <td>
          4.8.2.8
        </td>
      </tr>
  
      <tr>
        <td>
          B6
        </td>
        
        <td>
          Instance methods may only be invoked on and instance fields may only
          be accessed on already initialized instances.   
        </td>
  
        <td>
          4.8.2.9
        </td>
      </tr>
  
      <tr>
        <td>
          B7
        </td>
        
        <td>
          A register which holds the result of a <code>new-instance</code>code>
          instruction must not be used if the same
          <code>new-instance</code>code> instruction is again executed before
          the instance is initialized.           
        </td>
  
        <td>
          4.8.2.10
        </td>
      </tr>
  
      <tr>
        <td>
          B8
        </td>
        
        <td>
           An instance initializer must call another instance initializer (same
           class or superclass) before any instance members can be accessed.
           Exceptions are non-inherited instance fields, which can be assigned
           before calling another initializer, and the <code>Object</code> class
           in general.   
        </td>
  
        <td>
          4.8.2.11
        </td>
      </tr>
  
      <tr>
        <td>
          B9
        </td>
        
        <td>
           All actual method arguments must be assignment-compatible with their
           respective formal arguments.    
        </td>
  
        <td>
          4.8.2.12
        </td>
      </tr>
  
      <tr>
        <td>
          B10
        </td>
        
        <td>
           For each instance method invocation, the actual instance must be
           assignment-compatible with the class or interface specified in the
           instruction.
        </td>
  
        <td>
          4.8.2.13
        </td>
      </tr>
  
      <tr>
        <td>
          B11
        </td>
        
        <td>
           A <code>return&lt;kind&gt;</code> instruction must match its
           method's return type.  
        </td>
  
        <td>
          4.8.2.14
        </td>
      </tr>
  
      <tr>
        <td>
          B12
        </td>
        
        <td>
           When accessing protected members of a superclass, the actual type of
           the instance being accessed must be either the current class or one
           of its subclasses.
        </td>
  
        <td>
          4.8.2.15
        </td>
      </tr>
  
     <tr>
        <td>
          B13
        </td>
        
        <td>
           The type of a value stored into a static field must be
           assignment-compatible with or convertible to the field's type.
        </td>
  
        <td>
          4.8.2.16
        </td>
      </tr>
  
      <tr>
        <td>
          B14
        </td>
        
        <td>
           The type of a value stored into a field must be assignment-compatible
           with or convertible to the field's type.
        </td>
  
        <td>
          4.8.2.17
        </td>
      </tr>
  
      <tr>
        <td>
          B15
        </td>
        
        <td>
           The type of every value stored into an array must be
           assignment-compatible with the array's component type.
        </td>
  
        <td>
          4.8.2.18
        </td>
      </tr>
  
      <tr>
        <td>
          B16
        </td>
        
        <td>
           The <code>A</code> operand of a <code>throw</code> instruction must
           be assignment-compatible with <code>java.lang.Throwable</code>. 
        </td>
  
        <td>
          4.8.2.19
        </td>
      </tr>
  
      <tr>
        <td>
          B17
        </td>
        
        <td>
           The last reachable instruction of a method must either be a backwards
           <code>goto</code> or branch, a <code>return</code>, or a
           <code>throw</code> instruction. It must not be possible to leave the
           <code>insns</code> array at the bottom.
        </td>
  
        <td>
          4.8.2.20
        </td>
      </tr>
  
      <tr>
        <td>
          B18
        </td>
        
        <td>
          The unassigned half of a former register pair may not be read (is
          considered invalid) until it has been re-assigned by some other
          instruction.
        </td>        
  
        <td>
          4.8.2.3, 4.8.2.4
        </td>
      </tr>

      <tr>
        <td>
          B19
        </td>
        
        <td>
          A <code>move-result&lt;kind&gt;</code> instruction must be immediately
          preceded (in the <code>insns</code> array) by an
          <code>&lt;invoke-kind&gt;</code> instruction. The only exception is
          the <code>move-result-object</code> instruction, which may also be
          preceded by a <code>filled-new-array</code> instruction. 
        </td>
  
        <td>
          -
        </td>
      </tr>

      <tr>
        <td>
          B20
        </td>
        
        <td>
          A <code>move-result&lt;kind&gt;</code> instruction must be immediately
          preceded (in actual control flow) by a matching
          <code>return-&lt;kind&gt;</code> instruction (it must not be jumped
          to). The only exception is the <code>move-result-object</code>
          instruction, which may also be preceded by a
          <code>filled-new-array</code> instruction. 
        </td>
  
        <td>
          -
        </td>
      </tr>

      <tr>
        <td>
          B21
        </td>
        
        <td>
          A <code>move-exception</code> instruction must only appear as the
          first instruction in an exception handler.
        </td>
  
        <td>
          -
        </td>
      </tr>
      
      <tr>
        <td>
          B22
        </td>
        
        <td>
          The <code>packed-switch-data</code>, <code>sparse-switch-data</code>,
          and <code>fill-array-data</code> pseudo-instructions must not be
          reachable by control flow.
        </td>
  
        <td>
          -
        </td>
      </tr>
    </table>

  </body>
</html>