/*
* Copyright (C) 2008-2009 SVOX AG, Baslerstr. 30, 8048 Zuerich, Switzerland
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* @file picocep.c
*
* Phonetic to Acoustic Mapping PU - Implementation
*
* Copyright (C) 2008-2009 SVOX AG, Baslerstr. 30, 8048 Zuerich, Switzerland
* All rights reserved.
*
* History:
* - 2009-04-20 -- initial version
*
*/
/**
* @addtogroup picocep
* <b> Pico Cepstral Smoothing </b>\n
*
itemtype, iteminfo1, iteminfo2, content -> TYPE(INFO1,INFO2)content
in the following
items input
processed:
- PHONE(PHONID,StatesPerPhone)[FramesPerState|f0Index|mgcIndex]{StatesPerPhone}
(StatesPerPhone is a constant (5) for the time being. The content size is therfore allways 34)
unprocessed:
- all other item types are forwarded through the PU without modification
items output
FRAME(PHONID,F0 [?])ceps{25}
each PHONE produces at least StatesPerPhone FRAME (if each state has FramesPerState == 1), but usually more.
minimal input size (before processing starts)
other limitations
*/
#include "picodefs.h"
#include "picoos.h"
#include "picodbg.h"
#include "picodata.h"
#include "picokpdf.h"
#include "picodsp.h"
#include "picocep.h"
#ifdef __cplusplus
extern "C" {
#endif
#if 0
}
#endif
#define PICOCEP_MAXWINLEN 10000 /* maximum number of frames that can be smoothed, i.e. maximum sentence length */
#define PICOCEP_MSGSTR_SIZE 32
#define PICOCEP_IN_BUFF_SIZE PICODATA_BUFSIZE_DEFAULT
#define PICOCEP_OUT_DATA_FORMAT PICODATA_ITEMINFO1_FRAME_PAR_DATA_FORMAT_FIXED /* we output coefficients as fixed point values */
#define PICOCEP_STEPSTATE_COLLECT 0
#define PICOCEP_STEPSTATE_PROCESS_PARSE 1
#define PICOCEP_STEPSTATE_PROCESS_SMOOTH 2
#define PICOCEP_STEPSTATE_PROCESS_FRAME 3
#define PICOCEP_STEPSTATE_FEED 4
#define PICOCEP_LFZINVPOW 31 /* cannot be higher than 31 because 1<<invpow must fit in uint32 */
#define PICOCEP_MGCINVPOW 24
#define PICOCEP_LFZDOUBLEDEC 1
#define PICOCEP_MGCDOUBLEDEC 0
typedef enum picocep_WantMeanOrIvar
{
PICOCEP_WANTMEAN, PICOCEP_WANTIVAR
} picocep_WantMeanOrIvar_t;
typedef enum picocep_WantStaticOrDeltax
{
PICOCEP_WANTSTATIC, PICOCEP_WANTDELTA, PICOCEP_WANTDELTA2
} picocep_WantStaticOrDelta_t;
/*
* Fixedpoint arithmetic (might go into a separate module if general enough and needed by other modules)
*/
#if defined(PICO_DEBUG) || defined(PICO_DEVEL_MODE)
int numlongmult = 0, numshortmult = 0;
#endif
#define POW1 (0x1)
#define POW2 (0x2)
#define POW3 (0x4)
#define POW4 (0x8)
#define POW5 (0x10)
#define POW6 (0x20)
#define POW7 (0x40)
#define POW8 (0x80)
#define POW9 (0x100)
#define POW10 (0x200)
#define POW11 (0x400)
#define POW12 (0x800)
#define POW13 (0x1000)
#define POW14 (0x2000)
#define POW15 (0x4000)
#define POW16 (0x8000)
#define POW17 (0x10000)
#define POW18 (0x20000)
#define POW19 (0x40000)
#define POW20 (0x80000)
#define POW21 (0x100000)
#define POW22 (0x200000)
#define POW23 (0x400000)
#define POW24 (0x800000)
#define POW25 (0x1000000)
#define POW26 (0x2000000)
#define POW27 (0x4000000)
#define POW28 (0x8000000)
#define POW29 (0x10000000)
#define POW30 (0x20000000)
#define POW31 (0x40000000)
/* item num restriction: maximum number of extended item heads in headx */
#define PICOCEP_MAXNR_HEADX 60
/* item num restriction: maximum size of all item contents together in cont */
#define PICOCEP_MAXSIZE_CBUF 7680 /* (128 * PICOCEP_MAXNR_HEADX) */
typedef struct
{
picodata_itemhead_t head;
picoos_uint16 cind;
picoos_uint16 frame; /* sync position */
} picoacph_headx_t;
/*----------------------------------------------------------
// Name : cep_subobj
// Function: subobject definition for the cep processing
// Shortcut: cep
//---------------------------------------------------------*/
typedef struct cep_subobj
{
/*----------------------PU voice management------------------------------*/
/* picorsrc_Voice voice; */
/*----------------------PU state management------------------------------*/
picoos_uint8 procState; /* where to take up work at next processing step */
picoos_bool needMoreInput; /* more data necessary to start processing */
/* picoos_uint8 force; *//* forced processing (needMoreData but buffers full */
picoos_uint8 sentenceEnd;
picoos_uint8 feedFollowState;
picoos_bool inIgnoreState;
/*----------------------PU input management------------------------------*/
picoos_uint8 inBuf[PICODATA_MAX_ITEMSIZE]; /* internal input buffer */
picoos_uint16 inBufSize; /* actually allocated size */
picoos_uint16 inReadPos, inWritePos; /* next pos to read/write from/to inBuf*/
picoos_uint16 nextInPos;
picoacph_headx_t headx[PICOCEP_MAXNR_HEADX];
picoos_uint16 headxBottom; /* bottom */
picoos_uint16 headxWritePos; /* next free position; headx is empty if headxBottom == headxWritePos */
picoos_uint8 cbuf[PICOCEP_MAXSIZE_CBUF];
picoos_uint16 cbufBufSize; /* actually allocated size */
picoos_uint16 cbufWritePos; /* length, 0 if empty */
/*----------------------PU output management-----------------------------*/
picodata_itemhead_t framehead;
picoos_uint8 outBuf[PICODATA_MAX_ITEMSIZE]; /* internal output buffer (one item) */
picoos_uint16 outBufSize; /* allocated outBuf size */
picoos_uint16 outReadPos, outWritePos; /* next pos to read/write from/to outBuf*/
picoos_uint32 nNumFrames;
/*---------------------- other working variables ---------------------------*/
picoos_int32 diag0[PICOCEP_MAXWINLEN], diag1[PICOCEP_MAXWINLEN],
diag2[PICOCEP_MAXWINLEN], WUm[PICOCEP_MAXWINLEN],
invdiag0[PICOCEP_MAXWINLEN];
/*---------------------- constants --------------------------------------*/
picoos_int32 xi[5], x1[2], x2[3], xm[3], xn[2];
picoos_int32 xsqi[5], xsq1[2], xsq2[3], xsqm[3], xsqn[2];
picoos_uint32 scmeanpowLFZ, scmeanpowMGC;
picoos_uint32 scmeanLFZ, scmeanMGC;
/*---------------------- indices --------------------------------------*/
/* index buffer to hold indices as input for smoothing */
picoos_uint16 indicesLFZ[PICOCEP_MAXWINLEN];
picoos_uint16 indicesMGC[PICOCEP_MAXWINLEN];
picoos_uint16 indexReadPos, indexWritePos;
picoos_uint16 activeEndPos; /* end position of indices to be considered */
/* this is used for input and output */
picoos_uint8 phoneId[PICOCEP_MAXWINLEN]; /* synchronised with indexReadPos */
/*---------------------- coefficients --------------------------------------*/
/* output coefficients buffer */
picoos_int16 * outF0;
picoos_uint16 outF0ReadPos, outF0WritePos;
picoos_int16 * outXCep;
picoos_uint32 outXCepReadPos, outXCepWritePos; /* uint32 needed for MAXWINLEN*ceporder > 2^16 */
picoos_uint8 * outVoiced;
picoos_uint16 outVoicedReadPos, outVoicedWritePos;
/*---------------------- LINGWARE related data -------------------*/
/* pdflfz knowledge base */
picokpdf_PdfMUL pdflfz, pdfmgc;
} cep_subobj_t;
/**
* picocep_highestBit
* @brief find the highest non-zero bit in input x
* @remarks this may be implemented by comparing x to powers of 2
* or instead of calling this function perform multiplication
* and consult overflow register if available on target
* @note implemented as a series of macros
*/
#define picocep_highestBitNZ(x) (x>=POW17?(x>=POW25?(x>=POW29?(x>=POW31?31:(x>=POW30?30:29)):(x>=POW27?(x>=POW28?28:27):(x>=POW26?26:25))):(x>=POW21?(x>=POW23?(x>=POW24?24:23):(x>=POW22?22:21)):(x>=POW19?(x>=POW20?20:19):(x>=POW18?18:17)))):(x>=POW9?(x>=POW13?(x>=POW15?(x>=POW16?16:15):(x>=POW14?14:13)):(x>=POW11?(x>=POW12?12:11):(x>=POW10?10:9))):(x>=POW5?(x>=POW7?(x>=POW8?8:7):(x>=POW6?6:5)):(x>=POW3?(x>=POW4?4:3):(x>=POW2?2:1)))))
#define picocep_highestBitU(x) (x==0?0:picocep_highestBitNZ(x))
#define picocep_highestBitS(x,zz) (x==0?0:(x<0?((zz)=(-x),picocep_highestBitNZ(zz)):picocep_highestBitNZ(x)))
/* ------------------------------------------------------------------------------
Internal function definitions
---------------------------------------------------------------------------------*/
static void initSmoothing(cep_subobj_t * cep);
static picoos_int32 getFromPdf(picokpdf_PdfMUL pdf, picoos_uint32 vecstart,
picoos_uint8 cepnum, picocep_WantMeanOrIvar_t wantMeanOrIvar,
picocep_WantStaticOrDelta_t wantStaticOrDeltax);
static void invMatrix(cep_subobj_t * cep, picoos_uint16 N,
picoos_int16 *smoothcep, picoos_uint8 cepnum,
picokpdf_PdfMUL pdf, picoos_uint8 invpow, picoos_uint8 invDoubleDec);
static picoos_uint8 makeWUWandWUm(cep_subobj_t * cep, picokpdf_PdfMUL pdf,
picoos_uint16 *indices, picoos_uint16 b, picoos_uint16 N,
picoos_uint8 cepnum);
static void getDirect(picokpdf_PdfMUL pdf, picoos_uint16 *indices,
picoos_uint16 activeEndPos,
picoos_uint8 cepnum, picoos_int16 *smoothcep);
static void getVoiced(picokpdf_PdfMUL pdf, picoos_uint16 *indices,
picoos_uint16 activeEndPos,
picoos_uint8 *smoothcep);
static picoos_uint16 get_pi_uint16(picoos_uint8 * buf, picoos_uint16 *pos);
static void treat_phone(cep_subobj_t * cep, picodata_itemhead_t * ihead);
static picoos_uint8 forwardingItem(picodata_itemhead_t * ihead);
static picodata_step_result_t cepStep(register picodata_ProcessingUnit this,
picoos_int16 mode, picoos_uint16 * numBytesOutput);
/* --------------------------------------------
* generic PU management
* --------------------------------------------
*/
/**
* initialization of a cep PU (processing unit)
* @param this : handle to a cep PU struct
* @return PICO_OK : init succeded
* @return PICO_ERR_OTHER : init failed
* @callgraph
* @callergraph
*/
static pico_status_t cepInitialize(register picodata_ProcessingUnit this)
{
/*pico_status_t nRes;*/
cep_subobj_t * cep;
if (NULL == this || NULL == this->subObj) {
return PICO_ERR_OTHER;
}
cep = (cep_subobj_t *) this->subObj;
/* inBuf */
cep->inBufSize = PICODATA_BUFSIZE_CEP;
cep->inReadPos = 0;
cep->inWritePos = 0;
/* headx and cbuf */
cep->headxBottom = cep->headxWritePos = 0;
cep->cbufBufSize = PICOCEP_MAXSIZE_CBUF;
cep->cbufWritePos = 0;
/* outBuf */
cep->outBufSize = PICODATA_MAX_ITEMSIZE;
cep->outReadPos = 0;
cep->outWritePos = 0;
/* indices* */
cep->indexReadPos = 0;
cep->indexWritePos = 0;
/* outCep, outF0, outVoiced */
cep->outXCepReadPos = 0;
cep->outXCepWritePos = 0;
cep->outVoicedReadPos = 0;
cep->outVoicedWritePos = 0;
cep->outF0ReadPos = 0;
cep->outF0WritePos = 0;
cep->needMoreInput = 0;
cep->inIgnoreState = 0;
cep->sentenceEnd = FALSE;
cep->procState = PICOCEP_STEPSTATE_COLLECT;
cep->nNumFrames = 0;
/*-----------------------------------------------------------------
* MANAGE Item I/O control management
------------------------------------------------------------------*/
cep->activeEndPos = PICOCEP_MAXWINLEN;
/* kb pdflfz */
cep->pdflfz = picokpdf_getPdfMUL(
this->voice->kbArray[PICOKNOW_KBID_PDF_LFZ]);
/* kb pdfmgc */
cep->pdfmgc = picokpdf_getPdfMUL(
this->voice->kbArray[PICOKNOW_KBID_PDF_MGC]);
/* kb tab phones */
/* cep->phones =
picoktab_getPhones(this->voice->kbArray[PICOKNOW_KBID_TAB_PHONES]); */
/*---------------------- other working variables ---------------------------*/
/* define the (constant) FRAME_PAR item header */
cep->framehead.type = PICODATA_ITEM_FRAME_PAR;
cep->framehead.info1 = PICOCEP_OUT_DATA_FORMAT;
cep->framehead.info2 = cep->pdfmgc->ceporder;
cep->framehead.len = sizeof(picoos_uint16) + (cep->framehead.info2 + 4)
* sizeof(picoos_uint16);
/* constants used in makeWUWandWUm */
initSmoothing(cep);
cep->scmeanpowLFZ = cep->pdflfz->bigpow - cep->pdflfz->meanpow;
cep->scmeanpowMGC = cep->pdfmgc->bigpow - cep->pdfmgc->meanpow;
cep->scmeanLFZ = (1 << (picoos_uint32) cep->scmeanpowLFZ);
cep->scmeanMGC = (1 << (picoos_uint32) cep->scmeanpowMGC);
return PICO_OK;
}/*cepInitialize*/
/**
* termination of a cep PU (processing unit)
* @param this : handle to a cep PU struct
* @return PICO_OK : termination succeded
* @return PICO_ERR_OTHER : termination failed
* @callgraph
* @callergraph
*/
static pico_status_t cepTerminate(register picodata_ProcessingUnit this)
{
return PICO_OK;
}
/**
* deallocation of a cep PU internal sub object
* @param this : handle to a cep PU struct
* @param mm : handle of the engine memory manager
* @return PICO_OK : deallocation succeded
* @return PICO_ERR_OTHER : deallocation failed
* @callgraph
* @callergraph
*/
static pico_status_t cepSubObjDeallocate(register picodata_ProcessingUnit this,
picoos_MemoryManager mm)
{
mm = mm; /* avoid warning "var not used in this function"*/
#if defined(PICO_DEVEL_MODE)
printf("number of long mult is %d, number of short mult is %i\n",numlongmult,numshortmult);
#else
PICODBG_INFO_MSG(("number of long mult is %d, number of short mult is %i\n",numlongmult,numshortmult));
#endif
if (NULL != this) {
cep_subobj_t * cep = (cep_subobj_t *) this->subObj;
picoos_deallocate(this->common->mm, (void *) &cep->outXCep);
picoos_deallocate(this->common->mm, (void *) &cep->outVoiced);
picoos_deallocate(this->common->mm, (void *) &cep->outF0);
picoos_deallocate(this->common->mm, (void *) &this->subObj);
}
return PICO_OK;
}
/**
* creates a new cep PU (processing unit)
* @param mm : engine memory manager object pointer
* @param common : engine common object pointer
* @param cbIn : PU input buffer
* @param cbOut : PU output buffer
* @param voice : the voice descriptor object
* @return a valid PU handle if creation succeded
* @return NULL : creation failed
* @callgraph
* @callergraph
*/
picodata_ProcessingUnit picocep_newCepUnit(picoos_MemoryManager mm,
picoos_Common common, picodata_CharBuffer cbIn,
picodata_CharBuffer cbOut, picorsrc_Voice voice)
{
picodata_ProcessingUnit this = picodata_newProcessingUnit(mm, common, cbIn,
cbOut, voice);
cep_subobj_t * cep;
if (this == NULL) {
return NULL;
}
this->initialize = cepInitialize;
PICODBG_DEBUG(("set this->step to cepStep"));
this->step = cepStep;
this->terminate = cepTerminate;
this->subDeallocate = cepSubObjDeallocate;
this->subObj = picoos_allocate(mm, sizeof(cep_subobj_t));
cep = (cep_subobj_t *) this->subObj;
if (this->subObj == NULL) {
picoos_deallocate(mm, (void*) &this);
return NULL;
};
/* allocate output coeeficient buffers */
cep->outF0 = (picoos_int16 *) picoos_allocate(this->common->mm,
PICOCEP_MAXWINLEN * PICOKPDF_MAX_MUL_LFZ_CEPORDER
* sizeof(picoos_int16));
cep->outXCep = (picoos_int16 *) picoos_allocate(this->common->mm,
PICOCEP_MAXWINLEN * PICOKPDF_MAX_MUL_MGC_CEPORDER
* sizeof(picoos_int16));
cep->outVoiced = (picoos_uint8 *) picoos_allocate(this->common->mm,
PICOCEP_MAXWINLEN * sizeof(picoos_uint8));
if ((NULL == cep->outF0) || (NULL == cep->outXCep) || (NULL
== cep->outVoiced)) {
picoos_deallocate(this->common->mm, (void *) &(cep->outF0));
picoos_deallocate(this->common->mm, (void *) &(cep->outXCep));
picoos_deallocate(this->common->mm, (void *) &(cep->outVoiced));
picoos_deallocate(mm, (void*) &cep);
picoos_deallocate(mm, (void*) &this);
return NULL;
}
cepInitialize(this);
return this;
}/*picocep_newCepUnit*/
/* --------------------------------------------
* processing and internal functions
* --------------------------------------------
*/
/**
* multiply by 1<<pow and check overflow
* @param a : input value
* @param pow : shift value
* @return multiplied value
* @callgraph
* @callergraph
*/
static picoos_int32 picocep_fixptmultpow(picoos_int32 a, picoos_uint8 pow)
{
picoos_int32 b;
picoos_int32 zzz;
if (picocep_highestBitS(a,zzz) + pow < 32) {
b = a << pow;
} else {
/* clip to maximum positive or negative value */
b = 1 << 31; /* maximum negative value */
if (a > 0) {
b -= 1; /* maximum positive value */
}PICODBG_WARN(("picocep_fixptmultpow warning: overflow in fixed point multiplication %i*1<<%i. Clipping to %i\n", a, pow, b));
}
return b;
}
/**
* divide by 1<<pow with rounding
* @param a : input value
* @param pow : shift value
* @return divided value
* @callgraph
* @callergraph
*/
static picoos_int32 picocep_fixptdivpow(picoos_int32 a, picoos_uint8 pow)
{
picoos_int32 big;
if (a == 0) {
return a;
}
big = 1 << (pow - 1);
if (a > 0) {
a = (a + big) >> pow;
} else {
a = -1 * ((-1 * a + big) >> pow);
}
return a;
}
/**
* fixed point multiplication of x and y for large values of x or y or both
* @param x,y : operands 1 & 2, in fixed point S:M:N representation
* @param bigpow (int) : normalization factor=2**N, where N=number of binary decimal digits
* @param invDoubleDec : boolean indicating that x has double decimal size.
* do extra division by 1<<bigpow so that result has again single decimal size
* @return z(int) : result, in fixed point S:M:N representation
* @callgraph
* @callergraph
*/
static picoos_int32 picocep_fixptmultdouble(picoos_int32 x, picoos_int32 y,
picoos_uint8 bigpow, picoos_uint8 invDoubleDec)
{
picoos_int32 a, b, c, d, e, z;
picoos_int32 big;
big = 1 << bigpow;
/* a = floor(x/big); */
if (x >= 0) {
a = x >> bigpow;
b = x - (a << bigpow);
} else {
a = -1 * ((x * -1) >> bigpow); /* most significant 2 bytes of x */
b = x - (a << bigpow);
}
/* least significant 2 bytes of x i.e. x modulo big */
/* c = floor(y/big); */
if (y >= 0) {
c = y >> bigpow;
d = y - (c << bigpow);
} else {
c = -1 * ((y * -1) >> bigpow);
d = y - (c << bigpow);
}
if (invDoubleDec == 1) {
e = a * d + b * c + picocep_fixptdivpow(b * d, bigpow);
z = a * c + picocep_fixptdivpow(e, bigpow);
} else {
z = ((a * c) << bigpow) + (a * d + b * c) + picocep_fixptdivpow(b * d,
bigpow); /* 4 mult and 3 add instead of 1 mult. */
}
return z;
}
/**
* fixed point multiplication of x and y
* @param x,y : operands 1 & 2, in fixed point S:M:N representation
* @param bigpow (int) : normalization factor=2**N, where N=number of binary decimal digits
* @param invDoubleDec : boolean indicating that x has double decimal size.
* do extra division by 1<<bigpow so that result has again single decimal size
* @return z(int) : result, in fixed point S:M:N representation
* Notes
* - input and output values are 32 bit signed integers
* meant to represent a S.M.N encoding of a floating point value where
* - S : 1 sign bit
* - M : number of binary integer digits (M=32-1-N)
* - N : number of binary decimal digits (N=log2(big))
* the routine supports 2 methods
* -# standard multiplication of x and y
* -# long multiplication of x and y
* under PICO_DEBUG the number of double and single precision multiplications is monitored for accuracy/performance tuning
* Calls
* - picocep_highestBit
* - picocep_fixptmultdouble
* @callgraph
* @callergraph
*/
static picoos_int32 picocep_fixptmult(picoos_int32 x, picoos_int32 y,
picoos_uint8 bigpow, picoos_uint8 invDoubleDec)
{
picoos_int32 z;
picoos_uint8 multsz, pow;
picoos_int32 zz1, zz2;
/* in C, the evaluation order of f() + g() is not defined, so
* if both have a side effect on e.g. zz, the outcome of zz is not defined.
* For that reason, picocep_highestBitS(x,zz) + picocep_highestBitS(y,zz)
* would generate a warning "operation on zz may be undefined" which we
* avoid by using two different variables zz1 and zz2 */
multsz = picocep_highestBitS(x,zz1) + picocep_highestBitS(y,zz2);
pow = bigpow;
if (invDoubleDec == 1) {
pow += bigpow;
}
if (multsz <= 30) { /* x*y < 1<<30 is safe including rounding in picocep_fixptdivpow, x*y < 1<<31 is safe but not with rounding */
/* alternatively perform multiplication and consult overflow register */
z = picocep_fixptdivpow(x * y, pow);
#if defined(PICO_DEBUG)
numshortmult++; /* keep track of number of short multiplications */
#endif
} else {
#if defined(PICO_DEBUG)
if (multsz> 31 + pow) {
PICODBG_WARN(("picocep_fixptmult warning: overflow in fixed point multiplication %i*%i, multsz = %i, pow = %i, decrease bigpow\n", x, y, multsz, pow));
}
#endif
z = picocep_fixptmultdouble(x, y, bigpow, invDoubleDec); /* perform long multiplication for large x and y */
#if defined(PICO_DEBUG)
numlongmult++; /* keep track of number of long multiplications */
#endif
}
return z;
}/* picocep_fixptmult */
/**
* fixed point ^division of a vs b
* @param a,b : operands 1 & 2, in fixed point S:M:N representation
* @param bigpow (int) : normalization factor=2**N, where N=number of binary decimal digits
* @return z(int) : result, in fixed point S:M:N representation
* Notes
* - input and output values are 32 bit signed integers
* meant to represent a S.M.N encoding of a floating point value where
* - S : 1 sign bit
* - M : number of binary integer digits (M=32-1-N)
* - N : number of binary decimal digits (N=log2(big))
* - standard implementation of division by iteratively calculating
* the remainder and setting corresponding bit
* calculate integer part by integer division (DIV),
* then add X bits of precision in decimal part
* @callgraph
* @callergraph
*/
static picoos_int32 picocep_fixptdiv(picoos_int32 a, picoos_int32 b,
picoos_uint8 bigpow)
{
picoos_int32 r, c, f, h, stop;
r = (a < 0) ? -a : a; /* take absolute value; b is already guaranteed to be positive in smoothing operation */
if (r == 0) {
return 0;
}
c = 0;
stop = 0;
/* can speed up slightly by setting stop = 2 => slightly less precision */
h = r / b; /* in first loop h can be multiple bits, after first loop h can only be 0 or 1 */
/* faster implementation on target by using comparison instead of DIV? */
/* For our LDL even in first loop h <= 1, but not in backward step */
c = c + (h << bigpow); /* after first loop simply set bit */
r = r - h * b; /* corresponds to modulo operation */
bigpow--;
r <<= 1;
while ((bigpow > stop) && (r != 0)) { /* calculate bigpow bits after fixed point */
/* can speed up slightly by setting stop = 2 => slightly less precision */
if (r >= b) {
c += (1 << bigpow); /* after first loop simply set bit */
r -= b; /* corresponds to modulo operation */
}
bigpow--;
r <<= 1;
}
if (r != 0) {
f = r + (b >> 1);
if (f >= b) {
if (f >= b + b) {
c += 2;
} else {
c++;
}
}
}
/* final step: do rounding (experimentally improves accuracy for our problem) */
c = (a >= 0) ? c : -c; /* b is guaranteed to be positive because corresponds to diag0 */
return c;
}/* picocep_fixptdiv */
/**
* perform inversion of diagonal element of WUW matrix
* @param d : diagonal element to be inverted
* @param rowscpow (int) : fixed point base for each dimension of the vectors stored in the database
* @param bigpow (int) : fixed point base used during cepstral smoothing
* @param invpow : fixed point base of inverted pivot elements
* @return inverted pivot element
* @note
* - d is guaranteed positive
* @callgraph
* @callergraph
*/
static picoos_int32 picocep_fixptInvDiagEle(picoos_uint32 d,
picoos_uint8* rowscpow, picoos_uint8 bigpow, picoos_uint8 invpow)
{
picoos_uint32 r, b, c, h, f, stop;
picoos_uint8 dlen;
/* picoos_int32 zz; */
c = 0;
stop = 0;
dlen = picocep_highestBitU(d);
if (invpow + bigpow > 30 + dlen) { /* c must be < 2^32, hence d which is >= 2^(dlen-1) must be > 2^(invpow+bigpow-32), or invpow+bigpow must be <= dlen+30*/
*rowscpow = invpow + bigpow - 30 - dlen;PICODBG_DEBUG(("input to picocep_fixptInvDiagEle is %i <= 1<<%i = 1<<invpow+bigpow-32. Choose lower invpow. For now scaling row by 1<<%i\n", d, invpow+bigpow-32, *rowscpow));
} else {
*rowscpow = 0;
}
r = 1 << invpow;
b = d << (*rowscpow);
/* first */
h = r / b;
if (h > 0) {
c += (h << bigpow);
r -= h * b;
}
bigpow--;
r <<= 1;
/* loop */
while ((bigpow > stop) && (r != 0)) {
if (r >= b) {
c += (1 << bigpow);
r -= b;
}
bigpow--;
r <<= 1;
}
if (r != 0) {
f = r + (b >> 1);
if (f >= b) {
if (f >= b + b) {
c += 2;
} else {
c++;
}
}
}
return c;
}/* picocep_fixptInvDiagEle */
/**
* perform division of two operands a and b by multiplication by inverse of b
* @param a (int32) : operand 1 in fixed point S:M:N representation
* @param invb(uint32) : inverse of operand b, in fixed point P:Q representation (sign is positive)
* @param bigpow(uint8) : N = bigpow when invDoubleDec==0, else N = 2*bigpow
* @param invpow(uint8) : Q = invpow = number of binary decimal digits for invb
* @param invDoubleDec : boolean to indicate that a and the return value c have 2*N binary decimal digits instead of N
* @return c(int32) : result in fixed point S:v:w where w = 2*N when invDoubleDec == 1
* @note Calls
* - picocep_fixptmult
* @callgraph
* @callergraph
*/
static picoos_int32 picocep_fixptinv(picoos_int32 a, picoos_uint32 invb,
picoos_uint8 bigpow, picoos_uint8 invpow, picoos_uint8 invDoubleDec)
{
picoos_int32 c;
picoos_int8 normpow;
c = picocep_fixptmult(a, invb, bigpow, invDoubleDec);
/* if invDoubleDec==0, picocep_fixptmult assumes a and invb are in base 1<<bigpow and returns c = (a*b)/1<<bigpow
Since invb is in base 1<<invpow instead of 1<<bigpow, normalize c by 1<<(bigpow-invpow)
if invDoubleDec==1:
multiply additionally by 1<<bigpow*2 (for invb and c) so that base of c is again 2*bigpow
this can be seen by setting a=A*big, b=B*big, invb=big2/B, mult(a,invb) = a*invb/(big*big) = A/B*big*big2/(big*big) = A/B*big2/big
and we want c = A/B*big*big => normfactor = big^3/big2
*/
if (invDoubleDec == 1) {
normpow = 3 * bigpow;
} else {
normpow = bigpow;
}
if (normpow < invpow) {
/* divide with rounding */
c = picocep_fixptdivpow(c, invpow - normpow);
} else {
c = picocep_fixptmultpow(c, normpow - invpow);
}
return c;
}
/**
* initializes the coefficients to calculate delta and delta-delta values and the squares of the coefficients
* @param cep : the CEP PU sub-object handle
* @callgraph
* @callergraph
*/
static void initSmoothing(cep_subobj_t * cep)
{
cep->xi[0] = 1;
cep->xi[1] = -1;
cep->xi[2] = 2;
cep->xi[3] = -4;
cep->xi[4] = 2;
cep->xsqi[0] = 1;
cep->xsqi[1] = 1;
cep->xsqi[2] = 4;
cep->xsqi[3] = 16;
cep->xsqi[4] = 4;
cep->x1[0] = -1;
cep->x1[1] = 2;
cep->xsq1[0] = 1;
cep->xsq1[1] = 4;
cep->x2[0] = -1;
cep->x2[1] = -4;
cep->x2[2] = 2;
cep->xsq2[0] = 1;
cep->xsq2[1] = 16;
cep->xsq2[2] = 4;
cep->xm[0] = 1;
cep->xm[1] = 2;
cep->xm[2] = -4;
cep->xsqm[0] = 1;
cep->xsqm[1] = 4;
cep->xsqm[2] = 16;
cep->xn[0] = 1;
cep->xn[1] = 2;
cep->xsqn[0] = 1;
cep->xsqn[1] = 4;
}
/**
* matrix inversion
* @param cep : PU sub object pointer
* @param N
* @param smoothcep : pointer to picoos_int16, sequence of smoothed cepstral vectors
* @param cepnum : cepstral dimension to be treated
* @param pdf : pdf resource
* @param invpow : fixed point base for inverse
* @param invDoubleDec : boolean indicating that result of picocep_fixptinv has fixed point base 2*bigpow
* picocep_fixptmult absorbs double decimal size by dividing its result by extra factor big
* @return void
* @remarks diag0, diag1, diag2, WUm, invdiag0 globals needed in this function (object members in pico)
* @callgraph
* @callergraph
*/
static void invMatrix(cep_subobj_t * cep, picoos_uint16 N,
picoos_int16 *smoothcep, picoos_uint8 cepnum,
picokpdf_PdfMUL pdf, picoos_uint8 invpow, picoos_uint8 invDoubleDec)
{
picoos_int32 j, v1, v2, h;
picoos_uint32 k;
picoos_uint8 rowscpow, prevrowscpow;
picoos_uint8 ceporder = pdf->ceporder;
picoos_uint8 bigpow = pdf->bigpow;
picoos_uint8 meanpow = pdf->meanpow;
/* LDL factorization */
prevrowscpow = 0;
cep->invdiag0[0] = picocep_fixptInvDiagEle(cep->diag0[0], &rowscpow,
bigpow, invpow); /* inverse has fixed point basis 1<<invpow */
cep->diag1[0] = picocep_fixptinv((cep->diag1[0]) << rowscpow,
cep->invdiag0[0], bigpow, invpow, invDoubleDec); /* perform division via inverse */
cep->diag2[0] = picocep_fixptinv((cep->diag2[0]) << rowscpow,
cep->invdiag0[0], bigpow, invpow, invDoubleDec);
cep->WUm[0] = (cep->WUm[0]) << rowscpow; /* if diag0 too low, multiply LHS and RHS of row in matrix equation by 1<<rowscpow */
for (j = 1; j < N; j++) {
/* do forward substitution */
cep->WUm[j] = cep->WUm[j] - picocep_fixptmult(cep->diag1[j - 1],
cep->WUm[j - 1], bigpow, invDoubleDec);
if (j > 1) {
cep->WUm[j] = cep->WUm[j] - picocep_fixptmult(cep->diag2[j - 2],
cep->WUm[j - 2], bigpow, invDoubleDec);
}
/* update row j */
v1 = picocep_fixptmult((cep->diag1[j - 1]) / (1 << rowscpow),
cep->diag0[j - 1], bigpow, invDoubleDec); /* undo scaling by 1<<rowscpow because diag1(j-1) refers to symm ele in column j-1 not in row j-1 */
cep->diag0[j] = cep->diag0[j] - picocep_fixptmult(cep->diag1[j - 1],
v1, bigpow, invDoubleDec);
if (j > 1) {
v2 = picocep_fixptmult((cep->diag2[j - 2]) / (1 << prevrowscpow),
cep->diag0[j - 2], bigpow, invDoubleDec); /* undo scaling by 1<<prevrowscpow because diag1(j-2) refers to symm ele in column j-2 not in row j-2 */
cep->diag0[j] = cep->diag0[j] - picocep_fixptmult(
cep->diag2[j - 2], v2, bigpow, invDoubleDec);
}
prevrowscpow = rowscpow;
cep->invdiag0[j] = picocep_fixptInvDiagEle(cep->diag0[j], &rowscpow,
bigpow, invpow); /* inverse has fixed point basis 1<<invpow */
cep->WUm[j] = (cep->WUm[j]) << rowscpow;
if (j < N - 1) {
h = picocep_fixptmult(cep->diag2[j - 1], v1, bigpow, invDoubleDec);
cep->diag1[j] = picocep_fixptinv((cep->diag1[j] - h) << rowscpow,
cep->invdiag0[j], bigpow, invpow, invDoubleDec); /* eliminate column j below pivot */
}
if (j < N - 2) {
cep->diag2[j] = picocep_fixptinv((cep->diag2[j]) << rowscpow,
cep->invdiag0[j], bigpow, invpow, invDoubleDec); /* eliminate column j below pivot */
}
}
/* divide all entries of WUm by diag0 */
for (j = 0; j < N; j++) {
cep->WUm[j] = picocep_fixptinv(cep->WUm[j], cep->invdiag0[j], bigpow,
invpow, invDoubleDec);
if (invDoubleDec == 1) {
cep->WUm[j] = picocep_fixptdivpow(cep->WUm[j], bigpow);
}
}
/* backward substitution */
for (j = N - 2; j >= 0; j--) {
cep->WUm[j] = cep->WUm[j] - picocep_fixptmult(cep->diag1[j], cep->WUm[j
+ 1], bigpow, invDoubleDec);
if (j < N - 2) {
cep->WUm[j] = cep->WUm[j] - picocep_fixptmult(cep->diag2[j],
cep->WUm[j + 2], bigpow, invDoubleDec);
}
}
/* copy N frames into smoothcep (only for coeff # "cepnum") */
/* coefficients normalized to occupy short; for correct waveform energy, divide by (1<<(bigpow-meanpow)) then convert e.g. to picoos_single */
k = cepnum;
for (j = 0; j < N; j++) {
smoothcep[k] = (picoos_int16)(cep->WUm[j]/(1<<meanpow));
k += ceporder;
}
}/* invMatrix*/
/**
* Calculate matrix products needed to implement the solution
* @param cep : PU sub object pointer
* @param pdf : pointer to picoos_uint8, sequence of pdf vectors, each vector of length 1+ceporder*2+numdeltas*3+ceporder*3
* @param indices : indices of pdf vectors for all frames in current sentence
* @param b, N : to be smoothed frames indices (range will be from b to b+N-1)
* @param cepnum : cepstral dimension to be treated
* @return void
* @remarks diag0, diag1, diag2, WUm, invdiag0 globals needed in this function (object members in pico)
* @remarks WUW --> At x W x A
* @remarks WUm --> At x W x b
* @callgraph
* @callergraph
*/
static picoos_uint8 makeWUWandWUm(cep_subobj_t * cep, picokpdf_PdfMUL pdf,
picoos_uint16 *indices, picoos_uint16 b, picoos_uint16 N,
picoos_uint8 cepnum)
{
picoos_uint16 Id[2], Idd[3];
/*picoos_uint32 vecstart, k;*/
picoos_uint32 vecstart;
picoos_int32 *x = NULL, *xsq = NULL;
picoos_int32 mean, ivar;
picoos_uint16 i, j, numd = 0, numdd = 0;
picoos_uint8 vecsize = pdf->vecsize;
picoos_int32 prev_WUm, prev_diag0, prev_diag1, prev_diag1_1, prev_diag2;
prev_WUm = prev_diag0 = prev_diag1 = prev_diag1_1 = prev_diag2 = 0;
for (i = 0; i < N; i++) {
if ((1 < i) && (i < N - 2)) {
x = cep->xi;
xsq = cep->xsqi;
numd = 2;
numdd = 3;
Id[0] = Idd[0] = i - 1;
Id[1] = Idd[2] = i + 1;
Idd[1] = i;
} else if (i == 0) {
x = cep->x1;
xsq = cep->xsq1;
numd = numdd = 1;
Id[0] = Idd[0] = 1;
} else if (i == 1) {
x = cep->x2;
xsq = cep->xsq2;
numd = 1;
numdd = 2;
Id[0] = Idd[1] = 2;
Idd[0] = 1;
} else if (i == N - 2) {
x = cep->xm;
xsq = cep->xsqm;
numd = 1;
numdd = 2;
Id[0] = Idd[0] = N - 3;
Idd[1] = N - 2;
} else if (i == N - 1) {
x = cep->xn;
xsq = cep->xsqn;
numd = numdd = 1;
Id[0] = Idd[0] = N - 2;
}
/* process static means and static inverse variances */
if (i > 0 && indices[b + i] == indices[b + i - 1]) {
cep->diag0[i] = prev_diag0;
cep->WUm[i] = prev_WUm;
} else {
vecstart = indices[b + i] * vecsize;
ivar = getFromPdf(pdf, vecstart, cepnum, PICOCEP_WANTIVAR,
PICOCEP_WANTSTATIC);
prev_diag0 = cep->diag0[i] = ivar << 2; /* multiply ivar by 4 (4 used to be first entry of xsq) */
mean = getFromPdf(pdf, vecstart, cepnum, PICOCEP_WANTMEAN,
PICOCEP_WANTSTATIC);
prev_WUm = cep->WUm[i] = mean << 1; /* multiply mean by 2 (2 used to be first entry of x) */
}
/* process delta means and delta inverse variances */
for (j = 0; j < numd; j++) {
vecstart = indices[b + Id[j]] * vecsize;
ivar = getFromPdf(pdf, vecstart, cepnum, PICOCEP_WANTIVAR,
PICOCEP_WANTDELTA);
cep->diag0[i] += xsq[j] * ivar;
mean = getFromPdf(pdf, vecstart, cepnum, PICOCEP_WANTMEAN,
PICOCEP_WANTDELTA);
if (mean != 0) {
cep->WUm[i] += x[j] * mean;
}
}
/* process delta delta means and delta delta inverse variances */
for (j = 0; j < numdd; j++) {
vecstart = indices[b + Idd[j]] * vecsize;
ivar = getFromPdf(pdf, vecstart, cepnum, PICOCEP_WANTIVAR,
PICOCEP_WANTDELTA2);
cep->diag0[i] += xsq[numd + j] * ivar;
mean = getFromPdf(pdf, vecstart, cepnum, PICOCEP_WANTMEAN,
PICOCEP_WANTDELTA2);
if (mean != 0) {
cep->WUm[i] += x[numd + j] * mean;
}
}
cep->diag0[i] = (cep->diag0[i] + 2) / 4; /* long DIV with rounding */
cep->WUm[i] = (cep->WUm[i] + 1) / 2; /* long DIV with rounding */
/* calculate diag(A,-1) */
if (i < N - 1) {
if (i < N - 2) {
if (i > 0 && indices[b + i + 1] == indices[b + i]) {
cep->diag1[i] = prev_diag1;
} else {
vecstart = indices[b + i + 1] * vecsize;
/*
diag1[i] = getFromPdf(pdf, vecstart, numvuv, ceporder, numdeltas, cepnum,
bigpow, meanpowUm, ivarpow, PICOCEP_WANTIVAR, PICOCEP_WANTDELTA2);
*/
prev_diag1 = cep->diag1[i] = getFromPdf(pdf, vecstart,
cepnum, PICOCEP_WANTIVAR, PICOCEP_WANTDELTA2);
}
/*
k = vecstart +pdf->numvuv+pdf->ceporder*2 + pdf->numdeltas*3 +
pdf->ceporder*2 +cepnum;
cep->diag1[i] = (picoos_int32)(pdf->content[k]) << pdf->bigpow;
*/
} else {
cep->diag1[i] = 0;
}
if (i > 0) {
if (i > 1 && indices[b + i] == indices[b + i - 1]) {
cep->diag1[i] += prev_diag1_1;
} else {
vecstart = indices[b + i] * vecsize;
/*
k = vecstart + pdf->numvuv + pdf->ceporder * 2 + pdf->numdeltas * 3 + pdf->ceporder * 2 + cepnum;
cep->diag1[i] += (picoos_int32)(pdf->content[k]) << pdf->bigpow; */
/* cepnum'th delta delta ivar */
prev_diag1_1 = getFromPdf(pdf, vecstart, cepnum,
PICOCEP_WANTIVAR, PICOCEP_WANTDELTA2);
cep->diag1[i] += prev_diag1_1;
}
} /*i < N-1 */
cep->diag1[i] *= -2;
}
}
/* calculate diag(A,-2) */
for (i = 0; i < N - 2; i++) {
if (i > 0 && indices[b + i + 1] == indices[b + i]) {
cep->diag2[i] = prev_diag2;
} else {
vecstart = indices[b + i + 1] * vecsize;
/*
k = vecstart + pdf->numvuv + pdf->ceporder * 2 + pdf->numdeltas * 3 + pdf->ceporder * 2 + cepnum;
cep->diag2[i] = (picoos_int32)(pdf->content[k]) << pdf->bigpow;
k -= pdf->ceporder;
ivar = (picoos_int32)(pdf->content[k]) << pdf->bigpow;
*/
cep->diag2[i] = getFromPdf(pdf, vecstart, cepnum, PICOCEP_WANTIVAR,
PICOCEP_WANTDELTA2);
ivar = getFromPdf(pdf, vecstart, cepnum, PICOCEP_WANTIVAR,
PICOCEP_WANTDELTA);
cep->diag2[i] -= (ivar + 2) / 4;
prev_diag2 = cep->diag2[i];
}
}
return 0;
}/* makeWUWandWUm */
/**
* Retrieve actual values for MGC from PDF resource
* @param pdf : pointer to picoos_uint8, sequence of pdf vectors, each vector of length 1+ceporder*2+numdeltas*3+ceporder*3
* @param vecstart : indices of pdf vectors for all frames in current sentence
* @param cepnum : cepstral dimension to be treated
* @param wantMeanOrIvar : flag to select mean or variance values
* @param wantStaticOrDeltax : flag to select static or delta values
* @return the actual value retrieved
* @callgraph
* @callergraph
*/
static picoos_int32 getFromPdf(picokpdf_PdfMUL pdf, picoos_uint32 vecstart,
picoos_uint8 cepnum, picocep_WantMeanOrIvar_t wantMeanOrIvar,
picocep_WantStaticOrDelta_t wantStaticOrDeltax)
{
picoos_uint8 s, ind;
picoos_uint8 *p;
picoos_uint8 ceporder, ceporder2, cc;
picoos_uint32 k;
picoos_int32 mean = 0, ivar = 0;
if (pdf->numdeltas == 0xFF) {
switch (wantMeanOrIvar) {
case PICOCEP_WANTMEAN:
switch (wantStaticOrDeltax) {
case PICOCEP_WANTSTATIC:
p = pdf->content
+ (vecstart + pdf->numvuv + cepnum * 2); /* cepnum'th static mean */
mean = ((picoos_int32) ((picoos_int16) (*(p + 1) << 8))
| *p) << (pdf->meanpowUm[cepnum]);
break;
case PICOCEP_WANTDELTA:
cc = pdf->ceporder + cepnum;
p = pdf->content + (vecstart + pdf->numvuv + cc * 2); /* cepnum'th delta mean */
mean = ((picoos_int32) ((picoos_int16) (*(p + 1) << 8))
| *p) << (pdf->meanpowUm[cc]);
break;
case PICOCEP_WANTDELTA2:
cc = pdf->ceporder * 2 + cepnum;
p = pdf->content + (vecstart + pdf->numvuv + cc * 2); /* cepnum'th delta delta mean */
mean = ((picoos_int32) ((picoos_int16) (*(p + 1) << 8))
| *p) << (pdf->meanpowUm[cc]);
break;
default:
/* should never come here */
PICODBG_ERROR(("unknown type wantStaticOrDeltax = %i", wantStaticOrDeltax));
}
return mean;
break;
case PICOCEP_WANTIVAR:
switch (wantStaticOrDeltax) {
case PICOCEP_WANTSTATIC:
k = vecstart + pdf->numvuv + pdf->ceporder * 6 + cepnum; /* cepnum'th static ivar */
ivar = (picoos_int32) (pdf->content[k])
<< (pdf->ivarpow[cepnum]);
break;
case PICOCEP_WANTDELTA:
ceporder = pdf->ceporder;
k = vecstart + pdf->numvuv + ceporder * 7 + cepnum; /* cepnum'th delta ivar */
ivar = (picoos_int32) (pdf->content[k])
<< (pdf->ivarpow[ceporder + cepnum]);
break;
case PICOCEP_WANTDELTA2:
ceporder = pdf->ceporder;
k = vecstart + pdf->numvuv + ceporder * 8 + cepnum; /* cepnum'th delta delta ivar */
ivar = (picoos_int32) (pdf->content[k])
<< (pdf->ivarpow[2 * ceporder + cepnum]);
break;
default:
/* should never get here */
PICODBG_ERROR(("unknown type wantStaticOrDeltax = %i", wantStaticOrDeltax));
}
return ivar;
break;
default:
/* should never come here */
PICODBG_ERROR(("unknown type wantMeanOrIvar = %n", wantMeanOrIvar));
return 0;
}
} else {
switch (wantMeanOrIvar) {
case PICOCEP_WANTMEAN:
switch (wantStaticOrDeltax) {
case PICOCEP_WANTSTATIC:
p = pdf->content
+ (vecstart + pdf->numvuv + cepnum * 2); /* cepnum'th static mean */
mean = ((picoos_int32) ((picoos_int16) (*(p + 1) << 8))
| *p) << (pdf->meanpowUm[cepnum]);
return mean;
break;
case PICOCEP_WANTDELTA:
ceporder = pdf->ceporder;
s = 0;
ind = 0;
while ((s < pdf->numdeltas) && (ind < cepnum || (ind
== 0 && cepnum == 0))) { /* rawmean deltas are sparse so investigate indices in column */
k = vecstart + pdf->numvuv + ceporder * 2 + s; /* s'th delta index */
ind = (picoos_uint8) (pdf->content[k]); /* is already picoos_uint8 but just to make explicit */
if (ind == cepnum) {
k = vecstart + pdf->numvuv + ceporder * 2
+ pdf->numdeltas + s * 2; /* s'th sparse delta mean, corresponds to cepnum'th delta mean */
mean
= ((picoos_int32) ((picoos_int16) ((pdf->content[k
+ 1]) << 8)) | pdf->content[k])
<< (pdf->meanpowUm[ceporder
+ cepnum]);
return mean;
}
s++;
}
return 0;
break;
case PICOCEP_WANTDELTA2:
ceporder = pdf->ceporder;
ceporder2 = ceporder * 2;
s = pdf->numdeltas;
ind = 2 * ceporder;
while ((s-- > 0) && (ind > ceporder + cepnum)) { /* rawmean deltas are sparse so investigate indices in column */
k = vecstart + pdf->numvuv + ceporder2 + s; /* s'th delta index */
ind = (picoos_uint8) (pdf->content[k]); /* is already picoos_uint8 but just to make explicit */
if (ind == ceporder + cepnum) {
k = vecstart + pdf->numvuv + ceporder2
+ pdf->numdeltas + s * 2; /* s'th sparse delta mean, corresponds to cepnum'th delta delta mean */
mean
= ((picoos_int32) ((picoos_int16) ((pdf->content[k
+ 1]) << 8)) | pdf->content[k])
<< (pdf->meanpowUm[ceporder2
+ cepnum]);
return mean;
}
}
return 0;
break;
default:
PICODBG_ERROR(("getFromPdf: unknown type wantStaticOrDeltax = %i\n", wantStaticOrDeltax));
return 0;
}
break;
case PICOCEP_WANTIVAR:
switch (wantStaticOrDeltax) {
case PICOCEP_WANTSTATIC:
k = vecstart + pdf->numvuv + pdf->ceporder * 2
+ pdf->numdeltas * 3 + cepnum; /* cepnum'th static ivar */
ivar = (picoos_int32) (pdf->content[k])
<< (pdf->ivarpow[cepnum]);
break;
case PICOCEP_WANTDELTA:
ceporder = pdf->ceporder;
k = vecstart + pdf->numvuv + ceporder * 3
+ pdf->numdeltas * 3 + cepnum; /* cepnum'th delta ivar */
ivar = (picoos_int32) (pdf->content[k])
<< (pdf->ivarpow[ceporder + cepnum]);
break;
case PICOCEP_WANTDELTA2:
ceporder2 = 2 * pdf->ceporder;
k = vecstart + pdf->numvuv + ceporder2 + pdf->numdeltas
* 3 + ceporder2 + cepnum; /* cepnum'th delta delta ivar */
ivar = (picoos_int32) (pdf->content[k])
<< (pdf->ivarpow[ceporder2 + cepnum]);
break;
default:
PICODBG_ERROR(("unknown type wantStaticOrDeltax = %i", wantStaticOrDeltax));
}
return ivar;
break;
default:
PICODBG_ERROR(("unknown type wantMeanOrIvar = %i", wantMeanOrIvar));
return 0;
}
}
return 0;
}
/**
* Retrieve actual values for MGC from PDF resource - Variant "Direct"
* @param pdf : pointer to picoos_uint8, sequence of pdf vectors, each vector of length 1+ceporder*2+numdeltas*3+ceporder*3
* @param indices : indices of pdf vectors for all frames in current sentence
* @param activeEndPos : ??
* @param cepnum : cepstral dimension to be treated
* @param smoothcep : ??
* @return the actual value retrieved
* @callgraph
* @callergraph
*/
static void getDirect(picokpdf_PdfMUL pdf, picoos_uint16 *indices,
picoos_uint16 activeEndPos,
picoos_uint8 cepnum, picoos_int16 *smoothcep)
{
picoos_uint16 i;
picoos_uint32 j;
picoos_uint32 vecstart;
picoos_int32 mean, ivar;
picoos_int32 prev_mean;
picoos_uint8 vecsize = pdf->vecsize;
picoos_uint8 order = pdf->ceporder;
j = cepnum;
prev_mean = 0;
for (i = 0; i < activeEndPos; i++) {
if (i > 0 && indices[i] == indices[i - 1]) {
mean = prev_mean;
} else {
vecstart = indices[i] * vecsize;
mean = getFromPdf(pdf, vecstart, cepnum, PICOCEP_WANTMEAN,
PICOCEP_WANTSTATIC);
ivar = getFromPdf(pdf, vecstart, cepnum, PICOCEP_WANTIVAR,
PICOCEP_WANTSTATIC);
prev_mean = mean = picocep_fixptdiv(mean, ivar, pdf->bigpow);
}
smoothcep[j] = (picoos_int16)(mean/(1<<pdf->meanpow));
j += order;
}
}
/**
* Retrieve actual values for voicing from PDF resource
* @param pdf : pointer to picoos_uint8, sequence of pdf vectors, each vector of length 1+ceporder*2+numdeltas*3+ceporder*3
* @param indices : indices of pdf vectors for all frames in current sentence
* @param activeEndPos : end position of indices to be considered
* @return smoothcep : the values retrieved
* @callgraph
* @callergraph
*/
static void getVoiced(picokpdf_PdfMUL pdf, picoos_uint16 *indices,
picoos_uint16 activeEndPos,
picoos_uint8 *smoothcep)
{
picoos_uint16 i, j;
picoos_uint32 vecstart;
picoos_uint8 vecsize = pdf->vecsize;
if (pdf->numvuv == 0) {
/* do nothing */
} else {
for (i = 0, j = 0; i < activeEndPos; i++, j++) {
vecstart = indices[i] * vecsize;
smoothcep[j] = pdf->content[vecstart]; /* odd value is voiced, even if unvoiced */
}
}
}
/** reads platform-independent uint16 from buffer at *pos and advances *pos
* @param buf : buffer picoos_uint8
* @param *pos : start position inside buffer of pi uint16
* @return the uint16
* @callgraph
* @callergraph
*/
static picoos_uint16 get_pi_uint16(picoos_uint8 * buf, picoos_uint16 *pos)
{
picoos_uint16 res;
res = buf[(*pos)] | ((picoos_uint16) buf[(*pos) + 1] << 8);
*pos += 2;
return res;
}
/**
* Looks up indices of one phone item and fills index buffers. Consumes Item
* @param cep : the CEP PU sub object pointer
* @param ihead : pointer to the start of the phone item
* @callgraph
* @callergraph
*/
static void treat_phone(cep_subobj_t * cep, picodata_itemhead_t * ihead)
{
picoos_uint16 state, frame, frames;
picoos_uint16 indlfz, indmgc;
picoos_uint16 pos;
picoos_uint8 bufferFull;
/* treat all states
* for each state, repeat putting the index into the index buffer framesperstate times.
*/
/* set state and frame to the first state and frame in the phone to be considered */
state = 0; /* the first state to be considered */
frame = 0; /* the first frame to be considered */
/* numFramesPerState: 2 byte, lf0Index: 2 byte, mgcIndex: 2 byte -> 6 bytes per state */
PICODBG_DEBUG(("skipping to phone state %i ",state));
pos = cep->inReadPos + PICODATA_ITEM_HEADSIZE + state * 6;
/* */
PICODBG_DEBUG(("state info starts at inBuf pos %i ",pos));
/* get the current frames per state */
frames = get_pi_uint16(cep->inBuf, &pos);
/* */
PICODBG_DEBUG(("number of frames for this phone state: %i",frames));
/* */
PICODBG_DEBUG(("PARSE starting with frame %i",frame));
bufferFull = cep->indexWritePos >= PICOCEP_MAXWINLEN;
while ((state < ihead->info2) && (bufferFull == FALSE)) {
/* get the current state's lf0 and mgc indices and adjust according to state */
/* the indices have to be calculated as follows:
* new index = (index-1) + stateoffset(state) */
indlfz = get_pi_uint16(cep->inBuf, &pos); /* lfz index */
indlfz += -1 + cep->pdflfz->stateoffset[state]; /* transform index */
indmgc = get_pi_uint16(cep->inBuf, &pos); /* mgc index */
indmgc += -1 + cep->pdfmgc->stateoffset[state]; /* transform index */
/* are we reaching the end of the index buffers? */
if ((cep->indexWritePos - frame) + frames > PICOCEP_MAXWINLEN) {
/* number of frames that will still fit */
frames = PICOCEP_MAXWINLEN - (cep->indexWritePos - frame);
bufferFull = TRUE;
PICODBG_DEBUG(("smoothing buffer full at state=%i frame=%i",state, frame));
}
while (frame < frames) {
cep->indicesMGC[cep->indexWritePos] = indmgc;
cep->indicesLFZ[cep->indexWritePos] = indlfz;
cep->phoneId[cep->indexWritePos] = ihead->info1;
cep->indexWritePos++;
frame++;
}
/* proceed to next state */
PICODBG_DEBUG(("finished state %i with %i frames, now at index write pos %i",
state, frames,cep->indexWritePos));
state++;
if (state < ihead->info2) {
frame = 0;
frames = get_pi_uint16(cep->inBuf, &pos);
}
}
/* consume the phone item */
cep->inReadPos = cep->nextInPos;
/* */
PICODBG_DEBUG(("finished phone, advancing inReadPos to %i",cep->inReadPos));
}
/**
* Returns true if an Item has to be forwarded to next PU
* @param ihead : pointer to item head structure
* @return TRUE : the item should be forwarded
* @return FALSE : the item should be consumed
* @callgraph
* @callergraph
*/
static picoos_uint8 forwardingItem(picodata_itemhead_t * ihead)
{
if ((PICODATA_ITEM_CMD == ihead->type) && (PICODATA_ITEMINFO1_CMD_IGNSIG
== ihead->info1)) {
return FALSE;
} else {
return TRUE;
}
}
/**
* performs a step of the cep processing
* @param this : pointer to current PU (Control Unit)
* @param mode : mode for the PU (not used)
* @param numBytesOutput : pointer to output number fo bytes produced
* @return one of the "picodata_step_result_t" values
* @callgraph
* @callergraph
*/
static picodata_step_result_t cepStep(register picodata_ProcessingUnit this,
picoos_int16 mode, picoos_uint16 * numBytesOutput)
{
register cep_subobj_t * cep;
picodata_itemhead_t ihead /* , ohead */;
picoos_uint8 * icontents;
pico_status_t sResult = PICO_OK;
picoos_uint16 blen, clen;
picoos_uint16 numinb, numoutb;
#if defined (PICO_DEBUG)
picoos_char msgstr[PICOCEP_MSGSTR_SIZE];
#endif
numinb = 0;
numoutb = 0;
if (NULL == this || NULL == this->subObj) {
return PICODATA_PU_ERROR;
}
cep = (cep_subobj_t *) this->subObj;
mode = mode; /* avoid warning "var not used in this function"*/
/*Init number of output bytes*/
*numBytesOutput = 0;
while (1) { /* exit via return */
PICODBG_DEBUG(("doing pu state %i", cep->procState));
switch (cep->procState) {
case PICOCEP_STEPSTATE_COLLECT:
/* *************** item collector ***********************************/
PICODBG_TRACE(("COLLECT"));
/*collecting items from the PU input buffer*/
sResult = picodata_cbGetItem(this->cbIn,
&(cep->inBuf[cep->inWritePos]), cep->inBufSize
- cep->inWritePos, &blen);
if (PICO_EOF == sResult) { /* there are no more items available and we always need more data here */
PICODBG_DEBUG(("COLLECT need more data, returning IDLE"));
return PICODATA_PU_IDLE;
}
PICODBG_DEBUG(("got item, status: %d", sResult));
if ((PICO_OK == sResult) && (blen > 0)) {
/* we now have one item */
cep->inWritePos += blen;
cep->procState = PICOCEP_STEPSTATE_PROCESS_PARSE;
} else {
/* ignore item and stay in collect */
PICODBG_ERROR(("COLLECT got bad result %i", sResult));
cep->inReadPos = cep->inWritePos = 0;
}
/* return PICODATA_PU_ATOMIC; */
break;
case PICOCEP_STEPSTATE_PROCESS_PARSE:
/* **************** put item indices into index buffers (with repetition) ******************/
PICODBG_TRACE(("PARSE"));
PICODBG_DEBUG(("getting info from inBuf in range: [%i,%i[", cep->inReadPos, cep->inWritePos));
if (cep->inWritePos <= cep->inReadPos) {
/* no more items in inBuf */
/* we try to get more data */
PICODBG_DEBUG(("no more items in inBuf, try to collect more"));
/* cep->needMoreInput = TRUE; */
cep->inReadPos = cep->inWritePos = 0;
cep->procState = PICOCEP_STEPSTATE_COLLECT;
break;
}
/* look at the current item */
/*verify that current item is valid */
if (!picodata_is_valid_item(cep->inBuf + cep->inReadPos,
cep->inWritePos - cep->inReadPos)) {
PICODBG_ERROR(("found invalid item"));
sResult = picodata_get_iteminfo(
cep->inBuf + cep->inReadPos, cep->inWritePos
- cep->inReadPos, &ihead, &icontents);PICODBG_DEBUG(("PARSE bad item %s",picodata_head_to_string(&ihead,msgstr,PICOCEP_MSGSTR_SIZE)));
return PICODATA_PU_ERROR;
}
sResult = picodata_get_iteminfo(cep->inBuf + cep->inReadPos,
cep->inWritePos - cep->inReadPos, &ihead, &icontents);
if (PICO_EXC_BUF_UNDERFLOW == sResult) {
/* no more items in inBuf */
/* we try to get more data */
PICODBG_DEBUG(("no more items in inBuf, try to collect more"));
/* cep->needMoreInput = TRUE; */
cep->inReadPos = cep->inWritePos = 0;
cep->procState = PICOCEP_STEPSTATE_COLLECT;
break;
} else if (PICO_OK != sResult) {
PICODBG_ERROR(("unknown exception (sResult == %i)",sResult));
return (picodata_step_result_t) picoos_emRaiseException(
this->common->em, sResult, NULL, NULL);
break;
}
PICODBG_DEBUG(("PARSE looking at item %s",picodata_head_to_string(&ihead,msgstr,PICOCEP_MSGSTR_SIZE)));
cep->nextInPos = PICODATA_ITEM_HEADSIZE + ihead.len;
/* we decide what to do next depending on the item and the state of the index buffer:
* - process buffer if buffer not empty and sentence end or flush or ignsig/start (don't consume item yet)
* - fill buffer with (part of) phone contents if item is a phone
* - consume or copy for later output otherwise
*/
if (cep->inIgnoreState) {
if ((PICODATA_ITEM_CMD == ihead.type)
&& (PICODATA_ITEMINFO1_CMD_IGNSIG == ihead.info1)
&& (PICODATA_ITEMINFO2_CMD_END == ihead.info2)) {
cep->inIgnoreState = 0;
}PICODBG_DEBUG(("cep: PARSE consuming item of inBuf"));
cep->inReadPos = cep->nextInPos;
break;
}
/* see if it is a sentence end boundary or termination boundary (flush) and there are indices to smooth -> smooth */
if ((PICODATA_ITEM_BOUND == ihead.type)
&& ((PICODATA_ITEMINFO1_BOUND_SEND == ihead.info1)
|| (PICODATA_ITEMINFO1_BOUND_TERM == ihead.info1))
&& (cep->indexWritePos > 0)) {
/* we smooth the buffer */
cep->activeEndPos = cep->indexWritePos;
cep->sentenceEnd = TRUE;
/* output whatever we got */
PICODBG_DEBUG(("cep: PARSE found sentence terminator; setting activeEndPos to %i",cep->activeEndPos));
cep->procState = PICOCEP_STEPSTATE_PROCESS_SMOOTH;
break;
} else if (PICODATA_ITEM_PHONE == ihead.type) {
/* it is a phone */
PICODBG_DEBUG(("cep: PARSE treating PHONE"));
treat_phone(cep, &ihead);
} else {
if ((PICODATA_ITEM_CMD == ihead.type)
&& (PICODATA_ITEMINFO1_CMD_IGNSIG == ihead.info1)
&& (PICODATA_ITEMINFO2_CMD_START == ihead.info2)) {
cep->inIgnoreState = 1;
}
/* sentence end or flush remaining after frame or other non-processable item, e.g. command */
/* do we have to forward? */
if (forwardingItem(&ihead)) {
/* if no active frames, output immediately */
if (cep->indexWritePos <= 0) {
/* copy item to outBuf */
PICODBG_DEBUG(("PARSE copy item in inBuf to outBuf"));
picodata_copy_item(cep->inBuf + cep->inReadPos,
cep->inWritePos - cep->inReadPos,
cep->outBuf, cep->outBufSize, &blen);
cep->outWritePos += blen;
PICODATA_INFO_ITEM(this->voice->kbArray[PICOKNOW_KBID_DBG],
(picoos_uint8 *)"cep: do forward item ",
cep->outBuf, PICODATA_MAX_ITEMSIZE);
/* output item and then go to parse to treat a new item. */
cep->feedFollowState
= PICOCEP_STEPSTATE_PROCESS_PARSE;
cep->procState = PICOCEP_STEPSTATE_FEED;
} else if ((cep->headxWritePos < PICOCEP_MAXNR_HEADX)
&& (cep->cbufWritePos + ihead.len
< cep->cbufBufSize)) {
/* there is enough space to store item */
PICODBG_DEBUG(("unhandled item (type %c, length %i). Storing associated with index %i",ihead.type, ihead.len, cep->indexWritePos));
sResult
= picodata_get_itemparts(
cep->inBuf + cep->inReadPos,
cep->inWritePos - cep->inReadPos,
&(cep->headx[cep->headxWritePos].head),
&(cep->cbuf[cep->cbufWritePos]),
cep->cbufBufSize
- cep->cbufWritePos, &clen);
if (sResult != PICO_OK) {
PICODBG_ERROR(("problem getting item parts"));
picoos_emRaiseException(this->common->em,
sResult, NULL, NULL);
return PICODATA_PU_ERROR;
}
/* remember sync position */
cep->headx[cep->headxWritePos].frame
= cep->indexWritePos;
if (clen > 0) {
cep->headx[cep->headxWritePos].cind
= cep->cbufWritePos;
cep->cbufWritePos += clen;
} else {
cep->headx[cep->headxWritePos].cind = 0;
}
cep->headxWritePos++;
} else {
/* buffer full, smooth and output whatever we got */
PICODBG_DEBUG(("PARSE is forced to smooth prematurely; setting activeEndPos to %i", cep->activeEndPos));
cep->procState = PICOCEP_STEPSTATE_PROCESS_SMOOTH;
/* don't consume item yet */
break;
}
} else {
}PICODBG_DEBUG(("cep: PARSE consuming item of inBuf"));
cep->inReadPos = cep->nextInPos;
}
break;
case PICOCEP_STEPSTATE_PROCESS_SMOOTH:
/* **************** smooth (indexed) coefficients and store smoothed in outBuffers ****************/
PICODBG_TRACE(("SMOOTH"));
{
picokpdf_PdfMUL pdf;
/* picoos_uint16 framesTreated = 0; */
picoos_uint8 cepnum;
picoos_uint16 N;
N = cep->activeEndPos; /* numframes in current step */
/* the range to be smoothed starts at 0 and is N long */
/* smooth each cepstral dimension separately */
/* still to be experimented if higher order coeff can remain unsmoothed, i.e. simple copy from pdf */
/* reset the f0, ceps and voiced outfuffers */
cep->outXCepReadPos = cep->outXCepWritePos = 0;
cep->outVoicedReadPos = cep->outVoicedWritePos = 0;
cep->outF0ReadPos = cep->outF0WritePos = 0;
PICODBG_DEBUG(("smoothing %d frames\n", N));
/* smooth f0 */
pdf = cep->pdflfz;
for (cepnum = 0; cepnum < pdf->ceporder; cepnum++) {
if (cep->activeEndPos <= 0) {
/* do nothing */
} else if (3 < N) {
makeWUWandWUm(cep, pdf, cep->indicesLFZ, 0, N,
cepnum); /* update diag0, diag1, diag2, WUm */
invMatrix(cep, N, cep->outF0 + cep->outF0WritePos, cepnum, pdf,
PICOCEP_LFZINVPOW, PICOCEP_LFZDOUBLEDEC);
} else {
getDirect(pdf, cep->indicesLFZ, cep->activeEndPos,
cepnum, cep->outF0 + cep->outF0WritePos);
}
}/* end for cepnum */
cep->outF0WritePos += cep->activeEndPos * pdf->ceporder;
/* smooth mgc */
pdf = cep->pdfmgc;
for (cepnum = 0; cepnum < pdf->ceporder; cepnum++) {
if (cep->activeEndPos <= 0) {
/* do nothing */
} else if (3 < N) {
makeWUWandWUm(cep, pdf, cep->indicesMGC, 0, N,
cepnum); /* update diag0, diag1, diag2, WUm */
invMatrix(cep, N, cep->outXCep
+ cep->outXCepWritePos, cepnum,
pdf, PICOCEP_MGCINVPOW,
PICOCEP_MGCDOUBLEDEC);
} else {
getDirect(pdf, cep->indicesMGC, cep->activeEndPos,
cepnum, cep->outXCep + cep->outXCepWritePos);
}
}/* end for cepnum */
cep->outXCepWritePos += cep->activeEndPos * pdf->ceporder;
getVoiced(pdf, cep->indicesMGC, cep->activeEndPos, cep->outVoiced
+ cep->outVoicedWritePos);
cep->outVoicedWritePos += cep->activeEndPos;
}
/* setting indexReadPos to the next active index to be used. (will be advanced by FRAME when
* reading the phoneId */
cep->indexReadPos = 0;
cep->procState = PICOCEP_STEPSTATE_PROCESS_FRAME;
return PICODATA_PU_BUSY; /*data to feed*/
break;
case PICOCEP_STEPSTATE_PROCESS_FRAME:
/* *************** creating output items (type FRAME) ***********************************/
PICODBG_TRACE(("FRAME"));
if ((cep->headxBottom < cep->headxWritePos)
&& (cep->headx[cep->headxBottom].frame
<= cep->indexReadPos)) {
/* output item in headx/cbuf */
/* copy item to outBuf */
PICODBG_DEBUG(("FRAME copy item in inBuf to outBuf"));
picodata_put_itemparts(
&(cep->headx[cep->headxBottom].head),
&(cep->cbuf[cep->headx[cep->headxBottom].cind]),
cep->headx[cep->headxBottom].head.len, cep->outBuf,
cep->outBufSize, &blen);
cep->outWritePos += blen;
/* consume item in headx/cbuf */
PICODBG_DEBUG(("PARSE consuming item of headx/cbuf"));
cep->headxBottom++;
/* output item and then go to parse to treat a new item. */
cep->feedFollowState = PICOCEP_STEPSTATE_PROCESS_FRAME;
cep->procState = PICOCEP_STEPSTATE_FEED;
break;
}
if (cep->indexReadPos < cep->activeEndPos) {
/*------------ there are frames to output ----------------------------------------*/
/* still frames to output, create new FRAME_PAR item */
cep->nNumFrames++;
PICODBG_DEBUG(("FRAME creating FRAME_PAR: active: [0,%i[, read=%i, write=%i",
cep->activeEndPos, cep->indexReadPos, cep->indexWritePos
));
/* create FRAME_PAR items from cep->outXX one by one */
/* converting the ceps shorts into floats:
* scmeanpow = pdf->bigpow - pdf->meanpow;
* for all sval:
* fval = (picoos_single) sval / scmeanpow;
*/
cep->outWritePos = cep->outReadPos = 0;
cep->outBuf[cep->outWritePos++] = cep->framehead.type;
cep->outBuf[cep->outWritePos++] = cep->framehead.info1;
cep->outBuf[cep->outWritePos++] = cep->framehead.info2;
cep->outBuf[cep->outWritePos++] = cep->framehead.len;
PICODBG_DEBUG(("FRAME writing position after header: %i",cep->outWritePos));
{
picoos_uint16 tmpUint16;
picoos_int16 tmpInt16;
picoos_uint16 i;
/* */
PICODBG_DEBUG(("FRAME reading phoneId[%i] = %c:",cep->indexReadPos, cep->phoneId[cep->indexReadPos]));
/* */
tmpUint16
= (picoos_uint16) cep->phoneId[cep->indexReadPos];
picoos_mem_copy((void *) &tmpUint16,
(void *) &cep->outBuf[cep->outWritePos],
sizeof(tmpUint16));
cep->outWritePos += sizeof(tmpUint16);
PICODBG_DEBUG(("FRAME writing position after phone id: %i",cep->outWritePos));
for (i = 0; i < cep->pdflfz->ceporder; i++) {
tmpUint16 = (cep->outVoiced[cep->outVoicedReadPos]
& 0x01) ? cep->outF0[cep->outF0ReadPos]
: (picoos_uint16) 0;
picoos_mem_copy((void *) &tmpUint16,
(void *) &cep->outBuf[cep->outWritePos],
sizeof(tmpUint16));
cep->outWritePos += sizeof(tmpUint16);
tmpUint16
= (picoos_uint16) (cep->outVoiced[cep->outVoicedReadPos]);
picoos_mem_copy((void *) &tmpUint16,
(void *) &cep->outBuf[cep->outWritePos],
sizeof(tmpUint16));
cep->outWritePos += sizeof(tmpUint16);
tmpUint16
= (picoos_uint16) (cep->outF0[cep->outF0ReadPos]);
picoos_mem_copy((void *) &tmpUint16,
(void *) &cep->outBuf[cep->outWritePos],
sizeof(tmpUint16));
cep->outWritePos += sizeof(tmpUint16);
cep->outVoicedReadPos++;
cep->outF0ReadPos++;
}
PICODBG_DEBUG(("FRAME writing position after f0: %i",cep->outWritePos));
for (i = 0; i < cep->pdfmgc->ceporder; i++) {
tmpInt16 = cep->outXCep[cep->outXCepReadPos++];
picoos_mem_copy((void *) &tmpInt16,
(void *) &cep->outBuf[cep->outWritePos],
sizeof(tmpInt16));
cep->outWritePos += sizeof(tmpInt16);
}
PICODBG_DEBUG(("FRAME writing position after cepstrals: %i",cep->outWritePos));
tmpUint16
= (picoos_uint16) cep->indicesMGC[cep->indexReadPos++];
picoos_mem_copy((void *) &tmpUint16,
(void *) &cep->outBuf[cep->outWritePos],
sizeof(tmpUint16));
PICODBG_DEBUG(("FRAME writing position after mgc index: %i",cep->outWritePos));
cep->outWritePos += sizeof(tmpUint16);
}
/* finished to create FRAME_PAR, now output and then come back*/
cep->feedFollowState = PICOCEP_STEPSTATE_PROCESS_FRAME;
cep->procState = PICOCEP_STEPSTATE_FEED;
} else if (cep->sentenceEnd) {
/*------------ no more frames to output at end of sentence ----------------------------------------*/
PICODBG_INFO(("End of sentence - Processed frames : %d",
cep->nNumFrames));
cep->nNumFrames = 0;PICODBG_DEBUG(("FRAME no more active frames for this sentence"));
/* no frames left in this sentence*/
/* reset for new sentence */
initSmoothing(cep);
cep->sentenceEnd = FALSE;
cep->indexReadPos = cep->indexWritePos = 0;
cep->activeEndPos = PICOCEP_MAXWINLEN;
cep->headxBottom = cep->headxWritePos = 0;
cep->cbufWritePos = 0;
cep->procState = PICOCEP_STEPSTATE_PROCESS_PARSE;
} else {
/*------------ no more frames can be output but sentence end not reached ----------------------------------------*/
PICODBG_DEBUG(("Maximum number of frames per sentence reached"));
cep->procState = PICOCEP_STEPSTATE_PROCESS_PARSE;
}
/*----------------------------------------------------*/
break;
case PICOCEP_STEPSTATE_FEED:
/* ***********************************************************************/
/* FEED: combine input item with pos/phon pairs to output item */
/* ***********************************************************************/
PICODBG_DEBUG(("FEED"));
PICODBG_DEBUG(("FEED putting outBuf item into cb"));
/*feeding items to PU output buffer*/
sResult = picodata_cbPutItem(this->cbOut, cep->outBuf,
cep->outBufSize, &blen);
if (PICO_EXC_BUF_OVERFLOW == sResult) {
/* we have to redo this item */
PICODBG_DEBUG(("FEED got overflow, returning PICODATA_PU_OUT_FULL"));
return PICODATA_PU_OUT_FULL;
} else if (PICO_OK == sResult) {
if (cep->outBuf[0] != 'k') {
PICODATA_INFO_ITEM(this->voice->kbArray[PICOKNOW_KBID_DBG],
(picoos_uint8 *)"cep: ",
cep->outBuf, PICODATA_MAX_ITEMSIZE);
}
*numBytesOutput += blen;
/*-------------------------*/
/*reset the output pointers*/
/*-------------------------*/
if (cep->outReadPos >= cep->outWritePos) {
cep->outReadPos = 0;
cep->outWritePos = 0;
}
cep->procState = cep->feedFollowState;
PICODBG_DEBUG(("FEED ok, going back to procState %i", cep->procState));
return PICODATA_PU_BUSY;
} else {
PICODBG_DEBUG(("FEED got exception %i when trying to output item",sResult));
cep->procState = cep->feedFollowState;
return (picodata_step_result_t) sResult;
}
break;
default:
/*NOT feeding items*/
sResult = PICO_EXC_BUF_IGNORE;
break;
}/*end switch (cep->procState) */
return PICODATA_PU_BUSY; /*check if there is more data to process after feeding*/
}/*end while*/
/* we should never come here */
return PICODATA_PU_ERROR;
}/*cepStep*/
/* Picocep.c end */