NOTE:
Physical Topology
=================
These tests require two machines. And each machine needs to have 2 or more
interfaces. These tests assume that they run on the following topology.
Control Link
+------------------------------------+
| |
+-------+-------+ +-------+-------+
| +---- Test Link 0 ---+ |
| Local Host + : + Remote Host |
| +---- Test Link n ---+ |
+---------------+ +---------------+
Control Link is used by the local host to control the remote host.
`control' means, for example, changing the setting of the interfaces that are
connected to the test links. The setting of the interfaces connected to the
control link is never changed.
Test Links are the place where the stress tests run. For example, test packets
flow those links. The number of test links must be at least 1. The setting of
the interfaces connected to the test links would be changed by the tests.
Therefore, each test link should not belong to any external network. It is
recommended to connect each pair of interfaces with the ether cross cables.
Currently, different NIC testcases for ICMP/UDP/TCP/Multicast require plural
test links. Other testcases uses only 1 test link. (Test Link 0)
Installation
============
Like the other network tests, the remote host must have the LTP installed
in the same exact location as the local host have. Please refer the `Detailed
Installation 5.' section in INSTALL.
Execution
=========
To run the network stress testcases, use network.sh script, located in
testscripts directory. For documentation about using network.sh see INSTALL
and testcases/network/README.md
Unfortunately some stress tests still depend on rsh for accessing remote host, even
you decide to use SSH or network namespaces with network.sh.
Instead of rsh, you can use ssh to set the environment variable LTP_RSH.
Please refer the `Environment Variable' section of this document.
The behaviour of network stress tests is configurable with environment
variables (See `Environment Variable' section).
Attention for HTTP/FTP stress tests
===================================
When you run http or ftp stress tests, you have to start http or ftp server
before running the tests.
About ssh and dns tests, you don't need to run the ssh or dns server. Each
test runs named or sshd automatically.
Those tests requires that the remote host has `curl' command in order to
upload/download files to/from the local host.
When you run the ftp upload tests, please make sure the local host have
enough disk space to upload somes files. The size of file is able to
specify the environment variable (See `Environment Variable' section).
Environment Variable
====================
The nestwork stress testcases require the following environment variables:
RHOST
LHOST_HWADDRS
RHOST_HWADDRS
HTTP_DOWNLOAD_DIR (for http stress test)
FTP_DOWNLOAD_DIR (for ftp stress test)
FTP_UPLOAD_DIR (for ftp stress test)
FTP_UPLOAD_URLDIR (for ftp stress test)
You are able to configure the behavior of the testcases with the following
environment variables:
LTP_RSH
NS_DURATION (for the continual test)
NS_TIMES (for the repetition test)
CONNECTION_TOTAL (for creating a large number of connection test)
IP_TOTAL (for adding large number of IP address test)
IP_TOTAL_FOR_TCPIP (for multi IP address/alias test in icmp/udp/tcp)
ROUTE_TOTAL (for adding large number of route test)
MTU_CHANGE_TIMES (for changing mtu test)
IF_UPDOWN_TIMES (for interface up/down test)
MCASTNUM_NORMAL (for multicast test)
MCASTNUM_HEAVY (for multicast test)
DOWNLOAD_BIGFILESIZE (for http/ftp downloading stress test)
DOWNLOAD_REGFILESIZE (for http/ftp downloading stress test)
UPLOAD_BIGFILESIZE (for ftp uploading stress test)
UPLOAD_REGFILESIZE (for ftp uploading stress test)
In these value, NS_DURATION is important if you'd like to reduce the test time.
Required environment variables
------------------------------
o RHOST
The host name of the remote host to access it via the control link.
o LHOST_HWADDRS
The blank-separated hardware address list of the interfaces which are
connected to a test link at the local host.
This value have to have at least one address. The sequence of the hardware
address have to be same to the test link sequence.
o RHOST_HWADDRS
The blank-separated hardware address list of the interfaces which are
connected to a test link at the remote host.
This value have to have at least one address. The sequence of the hardware
address have to be same to the test link sequence.
o HTTP_DOWNLOAD_DIR (for http stress test)
The directory out of which the http server will serve the documents.
In the apache case, the value of this variable is same as DocumentRoot
value in httpd.conf
o FTP_DOWNLOAD_DIR (for ftp stress test)
The directory out of which the ftp server will serve the files.
o FTP_UPLOAD_DIR (for ftp stress test)
The directory which the ftp server will store the uploaded files.
o FTP_UPLOAD_URLDIR (for ftp stress test)
The directory part of URL where the client specifys to upload.
Namely, when the URL to upload is ftp://ltp.sourceforge.net/upload ,
/upload is the value to set the environment variable.
Optional environment variables
------------------------------
o LTP_RSH
The name of the remote shell command, namely rsh or ssh.
In ether case, the remote host must accept the login from the local host
without password.
o NS_DURATION (for the continual test)
The duration of the continual test. The time unit is `second'.
This variable affects all icmp/tcp/udp tests. The number of the testcase
in them is big. Therefore, the test time is reduced when you set small
value to the this variable.
Except icmp/tcp/udp tests, this variable affects ssh, ftp and http tests.
o NS_TIMES (for the repetition test)
The number of repetition times for the repetition tests.
This value affects IP adress add/del testcase, IP address change testcase
route add/del testcase and dns query tests.
o CONNECTION_TOTAL (for creating a large number of connection test)
The total number of connection when the testcase requires plural connection.
This value affects udp/tcp multi-connection to the same/different port
testcases, ftp and http testcases.
o IP_TOTAL (for adding large number of IP address test)
The total number of IP address to add an interface.
This value affect interface tests to add large number of IP address.
o IP_TOTAL_FOR_TCPIP (for multi IP address/alias test in icmp/udp/tcp)
The total number of IP address to add an interface for TCP/IP testcases.
This value affects udp/tcp multi-connection to the different IP
address/alias testcases.
o ROUTE_TOTAL (for adding large number of route test)
The total number of route to add an interface.
This value affect interface tests to add large number of route.
o MTU_CHANGE_TIMES (for changing mtu test)
The times of change the mtu value of an interface. The interval of
changing mtu is 5 seconds. Therefore, mtu changing tests requires
5 x MTU_CHANGE_TIMES [sec].
This value affect interface tests of changing mtu.
o IF_UPDOWN_TIMES (for interface up/down test)
The up/down times of the interface tests. To up/down an interface takes
time. If you specify 10,000 into this value, it takes 6 hours.
This value affect interface tests of upping/down the interface.
o MCASTNUM_NORMAL (for multicast tests)
The number of multicast group to join. This variable is used for
the stress test after joining some multicast groups. It is not the
main target for joining lots of multicast.
o MCASTNUM_HEAVY (for multicast tests)
The number of multicast group to join. This variable is used for
the stress test for joining lots of multicast group. This value is the
limit of the joining multicast group.
o DOWNLOAD_BIGFILESIZE (for http/ftp downloading stress test)
The file size of the downloading large size file tests.
This value affects ftp download and http tests.
o DOWNLOAD_REGFILESIZE (for http/ftp downloading stress test)
The file size of the downloading file by many clients.
This value affects ftp download and http tests.
o UPLOAD_BIGFILESIZE (for ftp uploading stress test)
The file size of the uploading large size file tests.
The server must have UPLOAD_BIGFILESIZE as free disk space.
This value affects ftp upload tests.
o UPLOAD_REGFILESIZE (for ftp uploading stress test)
The file size of the downloading file by many clients.
The server must have UPLOAD_REGFILESIZE x CONNECTION_NUM as free disk space.
This value affects ftp download and http tests.
--- Mitsuru Chinen <mitch@jp.ibm.com>