#!/bin/sh
################################################################################
## ##
## Copyright (c) International Business Machines Corp., 2005 ##
## ##
## This program is free software; you can redistribute it and#or modify ##
## it under the terms of the GNU General Public License as published by ##
## the Free Software Foundation; either version 2 of the License, or ##
## (at your option) any later version. ##
## ##
## This program is distributed in the hope that it will be useful, but ##
## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
## for more details. ##
## ##
## You should have received a copy of the GNU General Public License ##
## along with this program; if not, write to the Free Software ##
## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
## ##
## ##
################################################################################
#
# File:
# icmp4-multi-diffnic01
#
# Description:
# Verify that the kernel is not crashed with receiving and sending ICMP
# message at differnt NIC with the following conditions
# - The version of IP is IPv4
# - IPsec is not used
#
# *) This script may be read by the other test case
#
# Setup:
# See testcases/network/stress/README
#
# Author:
# Mitsuru Chinen <mitch@jp.ibm.com>
#
# History:
# Oct 19 2005 - Created (Mitsuru Chinen)
#
#-----------------------------------------------------------------------
# Uncomment line below for debug output.
#trace_logic=${trace_logic:-"set -x"}
$trace_logic
# The test case ID, the test case count and the total number of test case
TCID=${TCID:-icmp4-multi-diffnic01}
TST_TOTAL=1
TST_COUNT=1
export TCID
export TST_COUNT
export TST_TOTAL
# Test description
tst_resm TINFO "Verify that the kernel is not crashed with receiving and sending various size of ICMP message at differnt NIC simultaneously with the following conditions"
# Make sure the value of LTPROOT
LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
export LTPROOT
# Check the environmanet variable
. check_envval || exit $TST_TOTAL
# Dulation of the test [sec]
NS_DURATION=${NS_DURATION:-3600} # 1 hour
# The version of IP
IP_VER=${IP_VER:-4}
# true, if ipsec is used
DO_IPSEC=${DO_IPSEC:-false}
# The value of SPI
SPI=${SPI:-1000}
# IPsec Protocol ( ah / esp / ipcomp )
IPSEC_PROTO=${IPSEC_PROTO:-ah}
# IPsec Mode ( transport / tunnel )
IPSEC_MODE=${IPSEC_MODE:-transport}
# Array of the echo request packet size
ICMP_SIZE_ARRAY=${ICMP_SIZE_ARRAY:-"10 100 1000 10000 65507"}
#-----------------------------------------------------------------------
#
# Function: do_cleanup
#
# Description:
# Recover the system configuration
#
#-----------------------------------------------------------------------
do_cleanup()
{
# Kill the icmp traffic server
killall_icmp_traffic
# Unset SAD/SPD
output_ipsec_conf flush | setkey -c >/dev/null 2>&1
$LTP_RSH $RHOST ${LTPROOT}/'testcases/bin/output_ipsec_conf flush | PATH=/sbin:/usr/sbin:$PATH setkey -c' >/dev/null 2>&1
# Clean up each interface
link_num=0
while [ $link_num -lt $link_total ]; do
initialize_if lhost ${link_num}
initialize_if rhost ${link_num}
link_num=`expr $link_num + 1`
done
}
#-----------------------------------------------------------------------
#
# Setup
#
# Unset the maximum number of processes
ulimit -u unlimited
# Output the informaion
tst_resm TINFO "- Test duration is $NS_DURATION [sec]"
link_total=`echo $LHOST_HWADDRS | wc -w`
rhost_link_total=`echo $RHOST_HWADDRS | wc -w`
if [ $link_total -ne $rhost_link_total ]; then
tst_resm TBROK "The number of element in LHOST_HWADDRS differs from RHOST_HWADDRS"
exit 1
fi
if [ $link_total -lt 2 ]; then
tst_resm TBROK "This test case requires plural NICs."
exit 1
fi
tst_resm TINFO "- Target number of the connection is $link_total"
tst_resm TINFO "- Version of IP is IPv${IP_VER}"
tst_resm TINFO "- Size of packets are ( $ICMP_SIZE_ARRAY )"
if $DO_IPSEC ; then
message=`check_setkey`
if [ $? -ne 0 ]; then
tst_resm TBROK "$message"
exit 1
fi
case $IPSEC_PROTO in
ah)
tst_resm TINFO "- IPsec [ AH / $IPSEC_MODE ]"
;;
esp)
tst_resm TINFO "- IPsec [ ESP / $IPSEC_MODE ]"
;;
ipcomp)
tst_resm TINFO "- IPcomp [ $IPSEC_MODE ]"
;;
esac
fi
# Initialize the system configuration
do_cleanup
# Call do_cleanup function before exit
trap do_cleanup 0
# Loop for NIC configuration
link_num=0
lhost_addrs=""
while [ $link_num -lt $link_total ]; do
# name of interface of the local/remote host
lhost_ifname=`get_ifname lhost $link_num`
rhost_ifname=`get_ifname rhost $link_num`
# Set the IP address to each interface
case $IP_VER in
4)
network_part="10.0.${link_num}"
network_mask=24
lhost_host_part="2" # local host
rhost_host_part="1" # remote host
set_ipv4addr lhost $link_num $network_part $lhost_host_part
if [ $? -ne 0 ]; then
tst_resm TBROK "Failed to set IPv4 address at the local host"
exit 1
fi
set_ipv4addr rhost $link_num $network_part $rhost_host_part
if [ $? -ne 0 ]; then
tst_resm TBROK "Failed to set IPv4 address at the remote host"
exit 1
fi
# IPv4 address of the local/remote host
lhost_addr="${network_part}.${lhost_host_part}"
rhost_addr="${network_part}.${rhost_host_part}"
lhost_addrs="${lhost_addrs} ${lhost_addr}"
;;
6)
network_part="fd00:1:0:`printf %x ${link_num}`"
network_mask=64
lhost_host_part=":2" # local host
rhost_host_part=":1" # remote host
add_ipv6addr lhost $link_num $network_part $lhost_host_part
if [ $? -ne 0 ]; then
tst_resm TBROK "Failed to set IPv6 address at the local host"
exit 1
fi
add_ipv6addr rhost $link_num $network_part $rhost_host_part
if [ $? -ne 0 ]; then
tst_resm TBROK "Failed to set IPv6 address at the remote host"
exit 1
fi
lhost_addr="${network_part}:${lhost_host_part}"
rhost_addr="${network_part}:${rhost_host_part}"
lhost_addrs="${lhost_addrs} ${lhost_addr}"
;;
*)
tst_resm TBROK "Unknown IP version"
;;
esac
# Configure SAD/SPD
if $DO_IPSEC ; then
ipsec_log=`mktemp -p $TMPDIR`
# Set SAD/SPD according to the variables
output_ipsec_conf src \
$IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
| setkey -c 2>&1 | tee $ipsec_log
if [ $? -ne 0 -o -s $ipsec_log ]; then
rm -f $ipsec_log
tst_resm TBROK "Failed to configure SAD/SPD on the local host."
exit 1
fi
$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
if [ $? -ne 0 -o -s $ipsec_log ]; then
rm -f $ipsec_log
tst_resm TBROK "Failed to configure SAD/SPD on the remote host."
exit 1
fi
rm -f $ipsec_log
fi
# Make sure the connectivity
case $IP_VER in
4)
ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/check_icmpv4_connectivity $rhost_ifname $lhost_addr' ; echo $?'`
if [ $ret -ne 0 ]; then
tst_resm TBROK "There is no IPv4 connectivity on Link${link_num}"
exit 1
fi
;;
6)
ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/check_icmpv6_connectivity $rhost_ifname $lhost_addr' ; echo $?'`
if [ $ret -ne 0 ]; then
tst_resm TBROK "There is no IPv6 connectivity on Link${link_num}"
exit 1
fi
;;
esac
link_num=`expr $link_num + 1`
done
#-----------------------------------------------------------------------
#
# Main
#
#
connection_num=0
while [ $connection_num -lt $link_total ]; do
field=`expr $connection_num + 1`
lhost_addr=`echo $lhost_addrs | cut -d ' ' -f $field`
lhost_ifname=`get_ifname lhost $connection_num`
rhost_ifname=`get_ifname rhost $connection_num`
# Run a client
$LTP_RSH $RHOST "${LTPROOT}/testcases/bin/ns-echoclient -S $lhost_addr -f $IP_VER -s \"$ICMP_SIZE_ARRAY\"" &
connection_num=`expr $connection_num + 1`
done
sleep $NS_DURATION
killall_icmp_traffic
wait
#-----------------------------------------------------------------------
#
# Clean up
#
tst_resm TPASS "Test is finished successfully."
exit 0