/*
* Copyright © 2011 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#include "brw_vec4.h"
#include "brw_cfg.h"
#include "brw_eu.h"
namespace brw {
vec4_instruction::vec4_instruction(enum opcode opcode, const dst_reg &dst,
const src_reg &src0, const src_reg &src1,
const src_reg &src2)
{
this->opcode = opcode;
this->dst = dst;
this->src[0] = src0;
this->src[1] = src1;
this->src[2] = src2;
this->saturate = false;
this->force_writemask_all = false;
this->no_dd_clear = false;
this->no_dd_check = false;
this->writes_accumulator = false;
this->conditional_mod = BRW_CONDITIONAL_NONE;
this->predicate = BRW_PREDICATE_NONE;
this->predicate_inverse = false;
this->target = 0;
this->shadow_compare = false;
this->eot = false;
this->ir = NULL;
this->urb_write_flags = BRW_URB_WRITE_NO_FLAGS;
this->header_size = 0;
this->flag_subreg = 0;
this->mlen = 0;
this->base_mrf = 0;
this->offset = 0;
this->exec_size = 8;
this->group = 0;
this->size_written = (dst.file == BAD_FILE ?
0 : this->exec_size * type_sz(dst.type));
this->annotation = NULL;
}
vec4_instruction *
vec4_visitor::emit(vec4_instruction *inst)
{
inst->ir = this->base_ir;
inst->annotation = this->current_annotation;
this->instructions.push_tail(inst);
return inst;
}
vec4_instruction *
vec4_visitor::emit_before(bblock_t *block, vec4_instruction *inst,
vec4_instruction *new_inst)
{
new_inst->ir = inst->ir;
new_inst->annotation = inst->annotation;
inst->insert_before(block, new_inst);
return inst;
}
vec4_instruction *
vec4_visitor::emit(enum opcode opcode, const dst_reg &dst, const src_reg &src0,
const src_reg &src1, const src_reg &src2)
{
return emit(new(mem_ctx) vec4_instruction(opcode, dst, src0, src1, src2));
}
vec4_instruction *
vec4_visitor::emit(enum opcode opcode, const dst_reg &dst, const src_reg &src0,
const src_reg &src1)
{
return emit(new(mem_ctx) vec4_instruction(opcode, dst, src0, src1));
}
vec4_instruction *
vec4_visitor::emit(enum opcode opcode, const dst_reg &dst, const src_reg &src0)
{
return emit(new(mem_ctx) vec4_instruction(opcode, dst, src0));
}
vec4_instruction *
vec4_visitor::emit(enum opcode opcode, const dst_reg &dst)
{
return emit(new(mem_ctx) vec4_instruction(opcode, dst));
}
vec4_instruction *
vec4_visitor::emit(enum opcode opcode)
{
return emit(new(mem_ctx) vec4_instruction(opcode, dst_reg()));
}
#define ALU1(op) \
vec4_instruction * \
vec4_visitor::op(const dst_reg &dst, const src_reg &src0) \
{ \
return new(mem_ctx) vec4_instruction(BRW_OPCODE_##op, dst, src0); \
}
#define ALU2(op) \
vec4_instruction * \
vec4_visitor::op(const dst_reg &dst, const src_reg &src0, \
const src_reg &src1) \
{ \
return new(mem_ctx) vec4_instruction(BRW_OPCODE_##op, dst, \
src0, src1); \
}
#define ALU2_ACC(op) \
vec4_instruction * \
vec4_visitor::op(const dst_reg &dst, const src_reg &src0, \
const src_reg &src1) \
{ \
vec4_instruction *inst = new(mem_ctx) vec4_instruction( \
BRW_OPCODE_##op, dst, src0, src1); \
inst->writes_accumulator = true; \
return inst; \
}
#define ALU3(op) \
vec4_instruction * \
vec4_visitor::op(const dst_reg &dst, const src_reg &src0, \
const src_reg &src1, const src_reg &src2) \
{ \
assert(devinfo->gen >= 6); \
return new(mem_ctx) vec4_instruction(BRW_OPCODE_##op, dst, \
src0, src1, src2); \
}
ALU1(NOT)
ALU1(MOV)
ALU1(FRC)
ALU1(RNDD)
ALU1(RNDE)
ALU1(RNDZ)
ALU1(F32TO16)
ALU1(F16TO32)
ALU2(ADD)
ALU2(MUL)
ALU2_ACC(MACH)
ALU2(AND)
ALU2(OR)
ALU2(XOR)
ALU2(DP3)
ALU2(DP4)
ALU2(DPH)
ALU2(SHL)
ALU2(SHR)
ALU2(ASR)
ALU3(LRP)
ALU1(BFREV)
ALU3(BFE)
ALU2(BFI1)
ALU3(BFI2)
ALU1(FBH)
ALU1(FBL)
ALU1(CBIT)
ALU3(MAD)
ALU2_ACC(ADDC)
ALU2_ACC(SUBB)
ALU2(MAC)
ALU1(DIM)
/** Gen4 predicated IF. */
vec4_instruction *
vec4_visitor::IF(enum brw_predicate predicate)
{
vec4_instruction *inst;
inst = new(mem_ctx) vec4_instruction(BRW_OPCODE_IF);
inst->predicate = predicate;
return inst;
}
/** Gen6 IF with embedded comparison. */
vec4_instruction *
vec4_visitor::IF(src_reg src0, src_reg src1,
enum brw_conditional_mod condition)
{
assert(devinfo->gen == 6);
vec4_instruction *inst;
resolve_ud_negate(&src0);
resolve_ud_negate(&src1);
inst = new(mem_ctx) vec4_instruction(BRW_OPCODE_IF, dst_null_d(),
src0, src1);
inst->conditional_mod = condition;
return inst;
}
/**
* CMP: Sets the low bit of the destination channels with the result
* of the comparison, while the upper bits are undefined, and updates
* the flag register with the packed 16 bits of the result.
*/
vec4_instruction *
vec4_visitor::CMP(dst_reg dst, src_reg src0, src_reg src1,
enum brw_conditional_mod condition)
{
vec4_instruction *inst;
/* Take the instruction:
*
* CMP null<d> src0<f> src1<f>
*
* Original gen4 does type conversion to the destination type before
* comparison, producing garbage results for floating point comparisons.
*
* The destination type doesn't matter on newer generations, so we set the
* type to match src0 so we can compact the instruction.
*/
dst.type = src0.type;
resolve_ud_negate(&src0);
resolve_ud_negate(&src1);
inst = new(mem_ctx) vec4_instruction(BRW_OPCODE_CMP, dst, src0, src1);
inst->conditional_mod = condition;
return inst;
}
vec4_instruction *
vec4_visitor::SCRATCH_READ(const dst_reg &dst, const src_reg &index)
{
vec4_instruction *inst;
inst = new(mem_ctx) vec4_instruction(SHADER_OPCODE_GEN4_SCRATCH_READ,
dst, index);
inst->base_mrf = FIRST_SPILL_MRF(devinfo->gen) + 1;
inst->mlen = 2;
return inst;
}
vec4_instruction *
vec4_visitor::SCRATCH_WRITE(const dst_reg &dst, const src_reg &src,
const src_reg &index)
{
vec4_instruction *inst;
inst = new(mem_ctx) vec4_instruction(SHADER_OPCODE_GEN4_SCRATCH_WRITE,
dst, src, index);
inst->base_mrf = FIRST_SPILL_MRF(devinfo->gen);
inst->mlen = 3;
return inst;
}
src_reg
vec4_visitor::fix_3src_operand(const src_reg &src)
{
/* Using vec4 uniforms in SIMD4x2 programs is difficult. You'd like to be
* able to use vertical stride of zero to replicate the vec4 uniform, like
*
* g3<0;4,1>:f - [0, 4][1, 5][2, 6][3, 7]
*
* But you can't, since vertical stride is always four in three-source
* instructions. Instead, insert a MOV instruction to do the replication so
* that the three-source instruction can consume it.
*/
/* The MOV is only needed if the source is a uniform or immediate. */
if (src.file != UNIFORM && src.file != IMM)
return src;
if (src.file == UNIFORM && brw_is_single_value_swizzle(src.swizzle))
return src;
dst_reg expanded = dst_reg(this, glsl_type::vec4_type);
expanded.type = src.type;
emit(VEC4_OPCODE_UNPACK_UNIFORM, expanded, src);
return src_reg(expanded);
}
src_reg
vec4_visitor::resolve_source_modifiers(const src_reg &src)
{
if (!src.abs && !src.negate)
return src;
dst_reg resolved = dst_reg(this, glsl_type::ivec4_type);
resolved.type = src.type;
emit(MOV(resolved, src));
return src_reg(resolved);
}
src_reg
vec4_visitor::fix_math_operand(const src_reg &src)
{
if (devinfo->gen < 6 || devinfo->gen >= 8 || src.file == BAD_FILE)
return src;
/* The gen6 math instruction ignores the source modifiers --
* swizzle, abs, negate, and at least some parts of the register
* region description.
*
* Rather than trying to enumerate all these cases, *always* expand the
* operand to a temp GRF for gen6.
*
* For gen7, keep the operand as-is, except if immediate, which gen7 still
* can't use.
*/
if (devinfo->gen == 7 && src.file != IMM)
return src;
dst_reg expanded = dst_reg(this, glsl_type::vec4_type);
expanded.type = src.type;
emit(MOV(expanded, src));
return src_reg(expanded);
}
vec4_instruction *
vec4_visitor::emit_math(enum opcode opcode,
const dst_reg &dst,
const src_reg &src0, const src_reg &src1)
{
vec4_instruction *math =
emit(opcode, dst, fix_math_operand(src0), fix_math_operand(src1));
if (devinfo->gen == 6 && dst.writemask != WRITEMASK_XYZW) {
/* MATH on Gen6 must be align1, so we can't do writemasks. */
math->dst = dst_reg(this, glsl_type::vec4_type);
math->dst.type = dst.type;
math = emit(MOV(dst, src_reg(math->dst)));
} else if (devinfo->gen < 6) {
math->base_mrf = 1;
math->mlen = src1.file == BAD_FILE ? 1 : 2;
}
return math;
}
void
vec4_visitor::emit_pack_half_2x16(dst_reg dst, src_reg src0)
{
if (devinfo->gen < 7) {
unreachable("ir_unop_pack_half_2x16 should be lowered");
}
assert(dst.type == BRW_REGISTER_TYPE_UD);
assert(src0.type == BRW_REGISTER_TYPE_F);
/* From the Ivybridge PRM, Vol4, Part3, Section 6.27 f32to16:
*
* Because this instruction does not have a 16-bit floating-point type,
* the destination data type must be Word (W).
*
* The destination must be DWord-aligned and specify a horizontal stride
* (HorzStride) of 2. The 16-bit result is stored in the lower word of
* each destination channel and the upper word is not modified.
*
* The above restriction implies that the f32to16 instruction must use
* align1 mode, because only in align1 mode is it possible to specify
* horizontal stride. We choose here to defy the hardware docs and emit
* align16 instructions.
*
* (I [chadv] did attempt to emit align1 instructions for VS f32to16
* instructions. I was partially successful in that the code passed all
* tests. However, the code was dubiously correct and fragile, and the
* tests were not harsh enough to probe that frailty. Not trusting the
* code, I chose instead to remain in align16 mode in defiance of the hw
* docs).
*
* I've [chadv] experimentally confirmed that, on gen7 hardware and the
* simulator, emitting a f32to16 in align16 mode with UD as destination
* data type is safe. The behavior differs from that specified in the PRM
* in that the upper word of each destination channel is cleared to 0.
*/
dst_reg tmp_dst(this, glsl_type::uvec2_type);
src_reg tmp_src(tmp_dst);
#if 0
/* Verify the undocumented behavior on which the following instructions
* rely. If f32to16 fails to clear the upper word of the X and Y channels,
* then the result of the bit-or instruction below will be incorrect.
*
* You should inspect the disasm output in order to verify that the MOV is
* not optimized away.
*/
emit(MOV(tmp_dst, brw_imm_ud(0x12345678u)));
#endif
/* Give tmp the form below, where "." means untouched.
*
* w z y x w z y x
* |.|.|0x0000hhhh|0x0000llll|.|.|0x0000hhhh|0x0000llll|
*
* That the upper word of each write-channel be 0 is required for the
* following bit-shift and bit-or instructions to work. Note that this
* relies on the undocumented hardware behavior mentioned above.
*/
tmp_dst.writemask = WRITEMASK_XY;
emit(F32TO16(tmp_dst, src0));
/* Give the write-channels of dst the form:
* 0xhhhh0000
*/
tmp_src.swizzle = BRW_SWIZZLE_YYYY;
emit(SHL(dst, tmp_src, brw_imm_ud(16u)));
/* Finally, give the write-channels of dst the form of packHalf2x16's
* output:
* 0xhhhhllll
*/
tmp_src.swizzle = BRW_SWIZZLE_XXXX;
emit(OR(dst, src_reg(dst), tmp_src));
}
void
vec4_visitor::emit_unpack_half_2x16(dst_reg dst, src_reg src0)
{
if (devinfo->gen < 7) {
unreachable("ir_unop_unpack_half_2x16 should be lowered");
}
assert(dst.type == BRW_REGISTER_TYPE_F);
assert(src0.type == BRW_REGISTER_TYPE_UD);
/* From the Ivybridge PRM, Vol4, Part3, Section 6.26 f16to32:
*
* Because this instruction does not have a 16-bit floating-point type,
* the source data type must be Word (W). The destination type must be
* F (Float).
*
* To use W as the source data type, we must adjust horizontal strides,
* which is only possible in align1 mode. All my [chadv] attempts at
* emitting align1 instructions for unpackHalf2x16 failed to pass the
* Piglit tests, so I gave up.
*
* I've verified that, on gen7 hardware and the simulator, it is safe to
* emit f16to32 in align16 mode with UD as source data type.
*/
dst_reg tmp_dst(this, glsl_type::uvec2_type);
src_reg tmp_src(tmp_dst);
tmp_dst.writemask = WRITEMASK_X;
emit(AND(tmp_dst, src0, brw_imm_ud(0xffffu)));
tmp_dst.writemask = WRITEMASK_Y;
emit(SHR(tmp_dst, src0, brw_imm_ud(16u)));
dst.writemask = WRITEMASK_XY;
emit(F16TO32(dst, tmp_src));
}
void
vec4_visitor::emit_unpack_unorm_4x8(const dst_reg &dst, src_reg src0)
{
/* Instead of splitting the 32-bit integer, shifting, and ORing it back
* together, we can shift it by <0, 8, 16, 24>. The packed integer immediate
* is not suitable to generate the shift values, but we can use the packed
* vector float and a type-converting MOV.
*/
dst_reg shift(this, glsl_type::uvec4_type);
emit(MOV(shift, brw_imm_vf4(0x00, 0x60, 0x70, 0x78)));
dst_reg shifted(this, glsl_type::uvec4_type);
src0.swizzle = BRW_SWIZZLE_XXXX;
emit(SHR(shifted, src0, src_reg(shift)));
shifted.type = BRW_REGISTER_TYPE_UB;
dst_reg f(this, glsl_type::vec4_type);
emit(VEC4_OPCODE_MOV_BYTES, f, src_reg(shifted));
emit(MUL(dst, src_reg(f), brw_imm_f(1.0f / 255.0f)));
}
void
vec4_visitor::emit_unpack_snorm_4x8(const dst_reg &dst, src_reg src0)
{
/* Instead of splitting the 32-bit integer, shifting, and ORing it back
* together, we can shift it by <0, 8, 16, 24>. The packed integer immediate
* is not suitable to generate the shift values, but we can use the packed
* vector float and a type-converting MOV.
*/
dst_reg shift(this, glsl_type::uvec4_type);
emit(MOV(shift, brw_imm_vf4(0x00, 0x60, 0x70, 0x78)));
dst_reg shifted(this, glsl_type::uvec4_type);
src0.swizzle = BRW_SWIZZLE_XXXX;
emit(SHR(shifted, src0, src_reg(shift)));
shifted.type = BRW_REGISTER_TYPE_B;
dst_reg f(this, glsl_type::vec4_type);
emit(VEC4_OPCODE_MOV_BYTES, f, src_reg(shifted));
dst_reg scaled(this, glsl_type::vec4_type);
emit(MUL(scaled, src_reg(f), brw_imm_f(1.0f / 127.0f)));
dst_reg max(this, glsl_type::vec4_type);
emit_minmax(BRW_CONDITIONAL_GE, max, src_reg(scaled), brw_imm_f(-1.0f));
emit_minmax(BRW_CONDITIONAL_L, dst, src_reg(max), brw_imm_f(1.0f));
}
void
vec4_visitor::emit_pack_unorm_4x8(const dst_reg &dst, const src_reg &src0)
{
dst_reg saturated(this, glsl_type::vec4_type);
vec4_instruction *inst = emit(MOV(saturated, src0));
inst->saturate = true;
dst_reg scaled(this, glsl_type::vec4_type);
emit(MUL(scaled, src_reg(saturated), brw_imm_f(255.0f)));
dst_reg rounded(this, glsl_type::vec4_type);
emit(RNDE(rounded, src_reg(scaled)));
dst_reg u(this, glsl_type::uvec4_type);
emit(MOV(u, src_reg(rounded)));
src_reg bytes(u);
emit(VEC4_OPCODE_PACK_BYTES, dst, bytes);
}
void
vec4_visitor::emit_pack_snorm_4x8(const dst_reg &dst, const src_reg &src0)
{
dst_reg max(this, glsl_type::vec4_type);
emit_minmax(BRW_CONDITIONAL_GE, max, src0, brw_imm_f(-1.0f));
dst_reg min(this, glsl_type::vec4_type);
emit_minmax(BRW_CONDITIONAL_L, min, src_reg(max), brw_imm_f(1.0f));
dst_reg scaled(this, glsl_type::vec4_type);
emit(MUL(scaled, src_reg(min), brw_imm_f(127.0f)));
dst_reg rounded(this, glsl_type::vec4_type);
emit(RNDE(rounded, src_reg(scaled)));
dst_reg i(this, glsl_type::ivec4_type);
emit(MOV(i, src_reg(rounded)));
src_reg bytes(i);
emit(VEC4_OPCODE_PACK_BYTES, dst, bytes);
}
/*
* Returns the minimum number of vec4 (as_vec4 == true) or dvec4 (as_vec4 ==
* false) elements needed to pack a type.
*/
static int
type_size_xvec4(const struct glsl_type *type, bool as_vec4)
{
unsigned int i;
int size;
switch (type->base_type) {
case GLSL_TYPE_UINT:
case GLSL_TYPE_INT:
case GLSL_TYPE_FLOAT:
case GLSL_TYPE_FLOAT16:
case GLSL_TYPE_BOOL:
case GLSL_TYPE_DOUBLE:
case GLSL_TYPE_UINT16:
case GLSL_TYPE_INT16:
case GLSL_TYPE_UINT64:
case GLSL_TYPE_INT64:
if (type->is_matrix()) {
const glsl_type *col_type = type->column_type();
unsigned col_slots =
(as_vec4 && col_type->is_dual_slot()) ? 2 : 1;
return type->matrix_columns * col_slots;
} else {
/* Regardless of size of vector, it gets a vec4. This is bad
* packing for things like floats, but otherwise arrays become a
* mess. Hopefully a later pass over the code can pack scalars
* down if appropriate.
*/
return (as_vec4 && type->is_dual_slot()) ? 2 : 1;
}
case GLSL_TYPE_ARRAY:
assert(type->length > 0);
return type_size_xvec4(type->fields.array, as_vec4) * type->length;
case GLSL_TYPE_STRUCT:
size = 0;
for (i = 0; i < type->length; i++) {
size += type_size_xvec4(type->fields.structure[i].type, as_vec4);
}
return size;
case GLSL_TYPE_SUBROUTINE:
return 1;
case GLSL_TYPE_SAMPLER:
/* Samplers take up no register space, since they're baked in at
* link time.
*/
return 0;
case GLSL_TYPE_ATOMIC_UINT:
return 0;
case GLSL_TYPE_IMAGE:
return DIV_ROUND_UP(BRW_IMAGE_PARAM_SIZE, 4);
case GLSL_TYPE_VOID:
case GLSL_TYPE_ERROR:
case GLSL_TYPE_INTERFACE:
case GLSL_TYPE_FUNCTION:
unreachable("not reached");
}
return 0;
}
/**
* Returns the minimum number of vec4 elements needed to pack a type.
*
* For simple types, it will return 1 (a single vec4); for matrices, the
* number of columns; for array and struct, the sum of the vec4_size of
* each of its elements; and for sampler and atomic, zero.
*
* This method is useful to calculate how much register space is needed to
* store a particular type.
*/
extern "C" int
type_size_vec4(const struct glsl_type *type)
{
return type_size_xvec4(type, true);
}
/**
* Returns the minimum number of dvec4 elements needed to pack a type.
*
* For simple types, it will return 1 (a single dvec4); for matrices, the
* number of columns; for array and struct, the sum of the dvec4_size of
* each of its elements; and for sampler and atomic, zero.
*
* This method is useful to calculate how much register space is needed to
* store a particular type.
*
* Measuring double-precision vertex inputs as dvec4 is required because
* ARB_vertex_attrib_64bit states that these uses the same number of locations
* than the single-precision version. That is, two consecutives dvec4 would be
* located in location "x" and location "x+1", not "x+2".
*
* In order to map vec4/dvec4 vertex inputs in the proper ATTRs,
* remap_vs_attrs() will take in account both the location and also if the
* type fits in one or two vec4 slots.
*/
extern "C" int
type_size_dvec4(const struct glsl_type *type)
{
return type_size_xvec4(type, false);
}
src_reg::src_reg(class vec4_visitor *v, const struct glsl_type *type)
{
init();
this->file = VGRF;
this->nr = v->alloc.allocate(type_size_vec4(type));
if (type->is_array() || type->is_record()) {
this->swizzle = BRW_SWIZZLE_NOOP;
} else {
this->swizzle = brw_swizzle_for_size(type->vector_elements);
}
this->type = brw_type_for_base_type(type);
}
src_reg::src_reg(class vec4_visitor *v, const struct glsl_type *type, int size)
{
assert(size > 0);
init();
this->file = VGRF;
this->nr = v->alloc.allocate(type_size_vec4(type) * size);
this->swizzle = BRW_SWIZZLE_NOOP;
this->type = brw_type_for_base_type(type);
}
dst_reg::dst_reg(class vec4_visitor *v, const struct glsl_type *type)
{
init();
this->file = VGRF;
this->nr = v->alloc.allocate(type_size_vec4(type));
if (type->is_array() || type->is_record()) {
this->writemask = WRITEMASK_XYZW;
} else {
this->writemask = (1 << type->vector_elements) - 1;
}
this->type = brw_type_for_base_type(type);
}
vec4_instruction *
vec4_visitor::emit_minmax(enum brw_conditional_mod conditionalmod, dst_reg dst,
src_reg src0, src_reg src1)
{
vec4_instruction *inst = emit(BRW_OPCODE_SEL, dst, src0, src1);
inst->conditional_mod = conditionalmod;
return inst;
}
vec4_instruction *
vec4_visitor::emit_lrp(const dst_reg &dst,
const src_reg &x, const src_reg &y, const src_reg &a)
{
if (devinfo->gen >= 6) {
/* Note that the instruction's argument order is reversed from GLSL
* and the IR.
*/
return emit(LRP(dst, fix_3src_operand(a), fix_3src_operand(y),
fix_3src_operand(x)));
} else {
/* Earlier generations don't support three source operations, so we
* need to emit x*(1-a) + y*a.
*/
dst_reg y_times_a = dst_reg(this, glsl_type::vec4_type);
dst_reg one_minus_a = dst_reg(this, glsl_type::vec4_type);
dst_reg x_times_one_minus_a = dst_reg(this, glsl_type::vec4_type);
y_times_a.writemask = dst.writemask;
one_minus_a.writemask = dst.writemask;
x_times_one_minus_a.writemask = dst.writemask;
emit(MUL(y_times_a, y, a));
emit(ADD(one_minus_a, negate(a), brw_imm_f(1.0f)));
emit(MUL(x_times_one_minus_a, x, src_reg(one_minus_a)));
return emit(ADD(dst, src_reg(x_times_one_minus_a), src_reg(y_times_a)));
}
}
/**
* Emits the instructions needed to perform a pull constant load. before_block
* and before_inst can be NULL in which case the instruction will be appended
* to the end of the instruction list.
*/
void
vec4_visitor::emit_pull_constant_load_reg(dst_reg dst,
src_reg surf_index,
src_reg offset_reg,
bblock_t *before_block,
vec4_instruction *before_inst)
{
assert((before_inst == NULL && before_block == NULL) ||
(before_inst && before_block));
vec4_instruction *pull;
if (devinfo->gen >= 9) {
/* Gen9+ needs a message header in order to use SIMD4x2 mode */
src_reg header(this, glsl_type::uvec4_type, 2);
pull = new(mem_ctx)
vec4_instruction(VS_OPCODE_SET_SIMD4X2_HEADER_GEN9,
dst_reg(header));
if (before_inst)
emit_before(before_block, before_inst, pull);
else
emit(pull);
dst_reg index_reg = retype(byte_offset(dst_reg(header), REG_SIZE),
offset_reg.type);
pull = MOV(writemask(index_reg, WRITEMASK_X), offset_reg);
if (before_inst)
emit_before(before_block, before_inst, pull);
else
emit(pull);
pull = new(mem_ctx) vec4_instruction(VS_OPCODE_PULL_CONSTANT_LOAD_GEN7,
dst,
surf_index,
header);
pull->mlen = 2;
pull->header_size = 1;
} else if (devinfo->gen >= 7) {
dst_reg grf_offset = dst_reg(this, glsl_type::uint_type);
grf_offset.type = offset_reg.type;
pull = MOV(grf_offset, offset_reg);
if (before_inst)
emit_before(before_block, before_inst, pull);
else
emit(pull);
pull = new(mem_ctx) vec4_instruction(VS_OPCODE_PULL_CONSTANT_LOAD_GEN7,
dst,
surf_index,
src_reg(grf_offset));
pull->mlen = 1;
} else {
pull = new(mem_ctx) vec4_instruction(VS_OPCODE_PULL_CONSTANT_LOAD,
dst,
surf_index,
offset_reg);
pull->base_mrf = FIRST_PULL_LOAD_MRF(devinfo->gen) + 1;
pull->mlen = 1;
}
if (before_inst)
emit_before(before_block, before_inst, pull);
else
emit(pull);
}
src_reg
vec4_visitor::emit_uniformize(const src_reg &src)
{
const src_reg chan_index(this, glsl_type::uint_type);
const dst_reg dst = retype(dst_reg(this, glsl_type::uint_type),
src.type);
emit(SHADER_OPCODE_FIND_LIVE_CHANNEL, dst_reg(chan_index))
->force_writemask_all = true;
emit(SHADER_OPCODE_BROADCAST, dst, src, chan_index)
->force_writemask_all = true;
return src_reg(dst);
}
src_reg
vec4_visitor::emit_mcs_fetch(const glsl_type *coordinate_type,
src_reg coordinate, src_reg surface)
{
vec4_instruction *inst =
new(mem_ctx) vec4_instruction(SHADER_OPCODE_TXF_MCS,
dst_reg(this, glsl_type::uvec4_type));
inst->base_mrf = 2;
inst->src[1] = surface;
inst->src[2] = surface;
int param_base;
if (devinfo->gen >= 9) {
/* Gen9+ needs a message header in order to use SIMD4x2 mode */
vec4_instruction *header_inst = new(mem_ctx)
vec4_instruction(VS_OPCODE_SET_SIMD4X2_HEADER_GEN9,
dst_reg(MRF, inst->base_mrf));
emit(header_inst);
inst->mlen = 2;
inst->header_size = 1;
param_base = inst->base_mrf + 1;
} else {
inst->mlen = 1;
param_base = inst->base_mrf;
}
/* parameters are: u, v, r, lod; lod will always be zero due to api restrictions */
int coord_mask = (1 << coordinate_type->vector_elements) - 1;
int zero_mask = 0xf & ~coord_mask;
emit(MOV(dst_reg(MRF, param_base, coordinate_type, coord_mask),
coordinate));
emit(MOV(dst_reg(MRF, param_base, coordinate_type, zero_mask),
brw_imm_d(0)));
emit(inst);
return src_reg(inst->dst);
}
bool
vec4_visitor::is_high_sampler(src_reg sampler)
{
if (devinfo->gen < 8 && !devinfo->is_haswell)
return false;
return sampler.file != IMM || sampler.ud >= 16;
}
void
vec4_visitor::emit_texture(ir_texture_opcode op,
dst_reg dest,
const glsl_type *dest_type,
src_reg coordinate,
int coord_components,
src_reg shadow_comparator,
src_reg lod, src_reg lod2,
src_reg sample_index,
uint32_t constant_offset,
src_reg offset_value,
src_reg mcs,
uint32_t surface,
src_reg surface_reg,
src_reg sampler_reg)
{
enum opcode opcode;
switch (op) {
case ir_tex: opcode = SHADER_OPCODE_TXL; break;
case ir_txl: opcode = SHADER_OPCODE_TXL; break;
case ir_txd: opcode = SHADER_OPCODE_TXD; break;
case ir_txf: opcode = SHADER_OPCODE_TXF; break;
case ir_txf_ms: opcode = (devinfo->gen >= 9 ? SHADER_OPCODE_TXF_CMS_W :
SHADER_OPCODE_TXF_CMS); break;
case ir_txs: opcode = SHADER_OPCODE_TXS; break;
case ir_tg4: opcode = offset_value.file != BAD_FILE
? SHADER_OPCODE_TG4_OFFSET : SHADER_OPCODE_TG4; break;
case ir_query_levels: opcode = SHADER_OPCODE_TXS; break;
case ir_texture_samples: opcode = SHADER_OPCODE_SAMPLEINFO; break;
case ir_txb:
unreachable("TXB is not valid for vertex shaders.");
case ir_lod:
unreachable("LOD is not valid for vertex shaders.");
case ir_samples_identical: {
/* There are some challenges implementing this for vec4, and it seems
* unlikely to be used anyway. For now, just return false ways.
*/
emit(MOV(dest, brw_imm_ud(0u)));
return;
}
default:
unreachable("Unrecognized tex op");
}
vec4_instruction *inst = new(mem_ctx) vec4_instruction(opcode, dest);
inst->offset = constant_offset;
/* The message header is necessary for:
* - Gen4 (always)
* - Gen9+ for selecting SIMD4x2
* - Texel offsets
* - Gather channel selection
* - Sampler indices too large to fit in a 4-bit value.
* - Sampleinfo message - takes no parameters, but mlen = 0 is illegal
*/
inst->header_size =
(devinfo->gen < 5 || devinfo->gen >= 9 ||
inst->offset != 0 || op == ir_tg4 ||
op == ir_texture_samples ||
is_high_sampler(sampler_reg)) ? 1 : 0;
inst->base_mrf = 2;
inst->mlen = inst->header_size;
inst->dst.writemask = WRITEMASK_XYZW;
inst->shadow_compare = shadow_comparator.file != BAD_FILE;
inst->src[1] = surface_reg;
inst->src[2] = sampler_reg;
/* MRF for the first parameter */
int param_base = inst->base_mrf + inst->header_size;
if (op == ir_txs || op == ir_query_levels) {
int writemask = devinfo->gen == 4 ? WRITEMASK_W : WRITEMASK_X;
emit(MOV(dst_reg(MRF, param_base, lod.type, writemask), lod));
inst->mlen++;
} else if (op == ir_texture_samples) {
inst->dst.writemask = WRITEMASK_X;
} else {
/* Load the coordinate */
/* FINISHME: gl_clamp_mask and saturate */
int coord_mask = (1 << coord_components) - 1;
int zero_mask = 0xf & ~coord_mask;
emit(MOV(dst_reg(MRF, param_base, coordinate.type, coord_mask),
coordinate));
inst->mlen++;
if (zero_mask != 0) {
emit(MOV(dst_reg(MRF, param_base, coordinate.type, zero_mask),
brw_imm_d(0)));
}
/* Load the shadow comparator */
if (shadow_comparator.file != BAD_FILE && op != ir_txd && (op != ir_tg4 || offset_value.file == BAD_FILE)) {
emit(MOV(dst_reg(MRF, param_base + 1, shadow_comparator.type,
WRITEMASK_X),
shadow_comparator));
inst->mlen++;
}
/* Load the LOD info */
if (op == ir_tex || op == ir_txl) {
int mrf, writemask;
if (devinfo->gen >= 5) {
mrf = param_base + 1;
if (shadow_comparator.file != BAD_FILE) {
writemask = WRITEMASK_Y;
/* mlen already incremented */
} else {
writemask = WRITEMASK_X;
inst->mlen++;
}
} else /* devinfo->gen == 4 */ {
mrf = param_base;
writemask = WRITEMASK_W;
}
emit(MOV(dst_reg(MRF, mrf, lod.type, writemask), lod));
} else if (op == ir_txf) {
emit(MOV(dst_reg(MRF, param_base, lod.type, WRITEMASK_W), lod));
} else if (op == ir_txf_ms) {
emit(MOV(dst_reg(MRF, param_base + 1, sample_index.type, WRITEMASK_X),
sample_index));
if (opcode == SHADER_OPCODE_TXF_CMS_W) {
/* MCS data is stored in the first two channels of ‘mcs’, but we
* need to get it into the .y and .z channels of the second vec4
* of params.
*/
mcs.swizzle = BRW_SWIZZLE4(0, 0, 1, 1);
emit(MOV(dst_reg(MRF, param_base + 1,
glsl_type::uint_type, WRITEMASK_YZ),
mcs));
} else if (devinfo->gen >= 7) {
/* MCS data is in the first channel of `mcs`, but we need to get it into
* the .y channel of the second vec4 of params, so replicate .x across
* the whole vec4 and then mask off everything except .y
*/
mcs.swizzle = BRW_SWIZZLE_XXXX;
emit(MOV(dst_reg(MRF, param_base + 1, glsl_type::uint_type, WRITEMASK_Y),
mcs));
}
inst->mlen++;
} else if (op == ir_txd) {
const brw_reg_type type = lod.type;
if (devinfo->gen >= 5) {
lod.swizzle = BRW_SWIZZLE4(SWIZZLE_X,SWIZZLE_X,SWIZZLE_Y,SWIZZLE_Y);
lod2.swizzle = BRW_SWIZZLE4(SWIZZLE_X,SWIZZLE_X,SWIZZLE_Y,SWIZZLE_Y);
emit(MOV(dst_reg(MRF, param_base + 1, type, WRITEMASK_XZ), lod));
emit(MOV(dst_reg(MRF, param_base + 1, type, WRITEMASK_YW), lod2));
inst->mlen++;
if (dest_type->vector_elements == 3 || shadow_comparator.file != BAD_FILE) {
lod.swizzle = BRW_SWIZZLE_ZZZZ;
lod2.swizzle = BRW_SWIZZLE_ZZZZ;
emit(MOV(dst_reg(MRF, param_base + 2, type, WRITEMASK_X), lod));
emit(MOV(dst_reg(MRF, param_base + 2, type, WRITEMASK_Y), lod2));
inst->mlen++;
if (shadow_comparator.file != BAD_FILE) {
emit(MOV(dst_reg(MRF, param_base + 2,
shadow_comparator.type, WRITEMASK_Z),
shadow_comparator));
}
}
} else /* devinfo->gen == 4 */ {
emit(MOV(dst_reg(MRF, param_base + 1, type, WRITEMASK_XYZ), lod));
emit(MOV(dst_reg(MRF, param_base + 2, type, WRITEMASK_XYZ), lod2));
inst->mlen += 2;
}
} else if (op == ir_tg4 && offset_value.file != BAD_FILE) {
if (shadow_comparator.file != BAD_FILE) {
emit(MOV(dst_reg(MRF, param_base, shadow_comparator.type, WRITEMASK_W),
shadow_comparator));
}
emit(MOV(dst_reg(MRF, param_base + 1, glsl_type::ivec2_type, WRITEMASK_XY),
offset_value));
inst->mlen++;
}
}
emit(inst);
/* fixup num layers (z) for cube arrays: hardware returns faces * layers;
* spec requires layers.
*/
if (op == ir_txs && devinfo->gen < 7) {
/* Gen4-6 return 0 instead of 1 for single layer surfaces. */
emit_minmax(BRW_CONDITIONAL_GE, writemask(inst->dst, WRITEMASK_Z),
src_reg(inst->dst), brw_imm_d(1));
}
if (devinfo->gen == 6 && op == ir_tg4) {
emit_gen6_gather_wa(key_tex->gen6_gather_wa[surface], inst->dst);
}
if (op == ir_query_levels) {
/* # levels is in .w */
src_reg swizzled(dest);
swizzled.swizzle = BRW_SWIZZLE4(SWIZZLE_W, SWIZZLE_W,
SWIZZLE_W, SWIZZLE_W);
emit(MOV(dest, swizzled));
}
}
/**
* Apply workarounds for Gen6 gather with UINT/SINT
*/
void
vec4_visitor::emit_gen6_gather_wa(uint8_t wa, dst_reg dst)
{
if (!wa)
return;
int width = (wa & WA_8BIT) ? 8 : 16;
dst_reg dst_f = dst;
dst_f.type = BRW_REGISTER_TYPE_F;
/* Convert from UNORM to UINT */
emit(MUL(dst_f, src_reg(dst_f), brw_imm_f((float)((1 << width) - 1))));
emit(MOV(dst, src_reg(dst_f)));
if (wa & WA_SIGN) {
/* Reinterpret the UINT value as a signed INT value by
* shifting the sign bit into place, then shifting back
* preserving sign.
*/
emit(SHL(dst, src_reg(dst), brw_imm_d(32 - width)));
emit(ASR(dst, src_reg(dst), brw_imm_d(32 - width)));
}
}
void
vec4_visitor::gs_emit_vertex(int /* stream_id */)
{
unreachable("not reached");
}
void
vec4_visitor::gs_end_primitive()
{
unreachable("not reached");
}
void
vec4_visitor::emit_ndc_computation()
{
if (output_reg[VARYING_SLOT_POS][0].file == BAD_FILE)
return;
/* Get the position */
src_reg pos = src_reg(output_reg[VARYING_SLOT_POS][0]);
/* Build ndc coords, which are (x/w, y/w, z/w, 1/w) */
dst_reg ndc = dst_reg(this, glsl_type::vec4_type);
output_reg[BRW_VARYING_SLOT_NDC][0] = ndc;
output_num_components[BRW_VARYING_SLOT_NDC][0] = 4;
current_annotation = "NDC";
dst_reg ndc_w = ndc;
ndc_w.writemask = WRITEMASK_W;
src_reg pos_w = pos;
pos_w.swizzle = BRW_SWIZZLE4(SWIZZLE_W, SWIZZLE_W, SWIZZLE_W, SWIZZLE_W);
emit_math(SHADER_OPCODE_RCP, ndc_w, pos_w);
dst_reg ndc_xyz = ndc;
ndc_xyz.writemask = WRITEMASK_XYZ;
emit(MUL(ndc_xyz, pos, src_reg(ndc_w)));
}
void
vec4_visitor::emit_psiz_and_flags(dst_reg reg)
{
if (devinfo->gen < 6 &&
((prog_data->vue_map.slots_valid & VARYING_BIT_PSIZ) ||
output_reg[VARYING_SLOT_CLIP_DIST0][0].file != BAD_FILE ||
devinfo->has_negative_rhw_bug)) {
dst_reg header1 = dst_reg(this, glsl_type::uvec4_type);
dst_reg header1_w = header1;
header1_w.writemask = WRITEMASK_W;
emit(MOV(header1, brw_imm_ud(0u)));
if (prog_data->vue_map.slots_valid & VARYING_BIT_PSIZ) {
src_reg psiz = src_reg(output_reg[VARYING_SLOT_PSIZ][0]);
current_annotation = "Point size";
emit(MUL(header1_w, psiz, brw_imm_f((float)(1 << 11))));
emit(AND(header1_w, src_reg(header1_w), brw_imm_d(0x7ff << 8)));
}
if (output_reg[VARYING_SLOT_CLIP_DIST0][0].file != BAD_FILE) {
current_annotation = "Clipping flags";
dst_reg flags0 = dst_reg(this, glsl_type::uint_type);
dst_reg flags1 = dst_reg(this, glsl_type::uint_type);
emit(CMP(dst_null_f(), src_reg(output_reg[VARYING_SLOT_CLIP_DIST0][0]), brw_imm_f(0.0f), BRW_CONDITIONAL_L));
emit(VS_OPCODE_UNPACK_FLAGS_SIMD4X2, flags0, brw_imm_d(0));
emit(OR(header1_w, src_reg(header1_w), src_reg(flags0)));
emit(CMP(dst_null_f(), src_reg(output_reg[VARYING_SLOT_CLIP_DIST1][0]), brw_imm_f(0.0f), BRW_CONDITIONAL_L));
emit(VS_OPCODE_UNPACK_FLAGS_SIMD4X2, flags1, brw_imm_d(0));
emit(SHL(flags1, src_reg(flags1), brw_imm_d(4)));
emit(OR(header1_w, src_reg(header1_w), src_reg(flags1)));
}
/* i965 clipping workaround:
* 1) Test for -ve rhw
* 2) If set,
* set ndc = (0,0,0,0)
* set ucp[6] = 1
*
* Later, clipping will detect ucp[6] and ensure the primitive is
* clipped against all fixed planes.
*/
if (devinfo->has_negative_rhw_bug &&
output_reg[BRW_VARYING_SLOT_NDC][0].file != BAD_FILE) {
src_reg ndc_w = src_reg(output_reg[BRW_VARYING_SLOT_NDC][0]);
ndc_w.swizzle = BRW_SWIZZLE_WWWW;
emit(CMP(dst_null_f(), ndc_w, brw_imm_f(0.0f), BRW_CONDITIONAL_L));
vec4_instruction *inst;
inst = emit(OR(header1_w, src_reg(header1_w), brw_imm_ud(1u << 6)));
inst->predicate = BRW_PREDICATE_NORMAL;
output_reg[BRW_VARYING_SLOT_NDC][0].type = BRW_REGISTER_TYPE_F;
inst = emit(MOV(output_reg[BRW_VARYING_SLOT_NDC][0], brw_imm_f(0.0f)));
inst->predicate = BRW_PREDICATE_NORMAL;
}
emit(MOV(retype(reg, BRW_REGISTER_TYPE_UD), src_reg(header1)));
} else if (devinfo->gen < 6) {
emit(MOV(retype(reg, BRW_REGISTER_TYPE_UD), brw_imm_ud(0u)));
} else {
emit(MOV(retype(reg, BRW_REGISTER_TYPE_D), brw_imm_d(0)));
if (output_reg[VARYING_SLOT_PSIZ][0].file != BAD_FILE) {
dst_reg reg_w = reg;
reg_w.writemask = WRITEMASK_W;
src_reg reg_as_src = src_reg(output_reg[VARYING_SLOT_PSIZ][0]);
reg_as_src.type = reg_w.type;
reg_as_src.swizzle = brw_swizzle_for_size(1);
emit(MOV(reg_w, reg_as_src));
}
if (output_reg[VARYING_SLOT_LAYER][0].file != BAD_FILE) {
dst_reg reg_y = reg;
reg_y.writemask = WRITEMASK_Y;
reg_y.type = BRW_REGISTER_TYPE_D;
output_reg[VARYING_SLOT_LAYER][0].type = reg_y.type;
emit(MOV(reg_y, src_reg(output_reg[VARYING_SLOT_LAYER][0])));
}
if (output_reg[VARYING_SLOT_VIEWPORT][0].file != BAD_FILE) {
dst_reg reg_z = reg;
reg_z.writemask = WRITEMASK_Z;
reg_z.type = BRW_REGISTER_TYPE_D;
output_reg[VARYING_SLOT_VIEWPORT][0].type = reg_z.type;
emit(MOV(reg_z, src_reg(output_reg[VARYING_SLOT_VIEWPORT][0])));
}
}
}
vec4_instruction *
vec4_visitor::emit_generic_urb_slot(dst_reg reg, int varying, int component)
{
assert(varying < VARYING_SLOT_MAX);
unsigned num_comps = output_num_components[varying][component];
if (num_comps == 0)
return NULL;
assert(output_reg[varying][component].type == reg.type);
current_annotation = output_reg_annotation[varying];
if (output_reg[varying][component].file != BAD_FILE) {
src_reg src = src_reg(output_reg[varying][component]);
src.swizzle = BRW_SWZ_COMP_OUTPUT(component);
reg.writemask =
brw_writemask_for_component_packing(num_comps, component);
return emit(MOV(reg, src));
}
return NULL;
}
void
vec4_visitor::emit_urb_slot(dst_reg reg, int varying)
{
reg.type = BRW_REGISTER_TYPE_F;
output_reg[varying][0].type = reg.type;
switch (varying) {
case VARYING_SLOT_PSIZ:
{
/* PSIZ is always in slot 0, and is coupled with other flags. */
current_annotation = "indices, point width, clip flags";
emit_psiz_and_flags(reg);
break;
}
case BRW_VARYING_SLOT_NDC:
current_annotation = "NDC";
if (output_reg[BRW_VARYING_SLOT_NDC][0].file != BAD_FILE)
emit(MOV(reg, src_reg(output_reg[BRW_VARYING_SLOT_NDC][0])));
break;
case VARYING_SLOT_POS:
current_annotation = "gl_Position";
if (output_reg[VARYING_SLOT_POS][0].file != BAD_FILE)
emit(MOV(reg, src_reg(output_reg[VARYING_SLOT_POS][0])));
break;
case VARYING_SLOT_EDGE: {
/* This is present when doing unfilled polygons. We're supposed to copy
* the edge flag from the user-provided vertex array
* (glEdgeFlagPointer), or otherwise we'll copy from the current value
* of that attribute (starts as 1.0f). This is then used in clipping to
* determine which edges should be drawn as wireframe.
*/
current_annotation = "edge flag";
int edge_attr = _mesa_bitcount_64(nir->info.inputs_read &
BITFIELD64_MASK(VERT_ATTRIB_EDGEFLAG));
emit(MOV(reg, src_reg(dst_reg(ATTR, edge_attr,
glsl_type::float_type, WRITEMASK_XYZW))));
break;
}
case BRW_VARYING_SLOT_PAD:
/* No need to write to this slot */
break;
default:
for (int i = 0; i < 4; i++) {
emit_generic_urb_slot(reg, varying, i);
}
break;
}
}
static int
align_interleaved_urb_mlen(const struct gen_device_info *devinfo, int mlen)
{
if (devinfo->gen >= 6) {
/* URB data written (does not include the message header reg) must
* be a multiple of 256 bits, or 2 VS registers. See vol5c.5,
* section 5.4.3.2.2: URB_INTERLEAVED.
*
* URB entries are allocated on a multiple of 1024 bits, so an
* extra 128 bits written here to make the end align to 256 is
* no problem.
*/
if ((mlen % 2) != 1)
mlen++;
}
return mlen;
}
/**
* Generates the VUE payload plus the necessary URB write instructions to
* output it.
*
* The VUE layout is documented in Volume 2a.
*/
void
vec4_visitor::emit_vertex()
{
/* MRF 0 is reserved for the debugger, so start with message header
* in MRF 1.
*/
int base_mrf = 1;
int mrf = base_mrf;
/* In the process of generating our URB write message contents, we
* may need to unspill a register or load from an array. Those
* reads would use MRFs 14-15.
*/
int max_usable_mrf = FIRST_SPILL_MRF(devinfo->gen);
/* The following assertion verifies that max_usable_mrf causes an
* even-numbered amount of URB write data, which will meet gen6's
* requirements for length alignment.
*/
assert ((max_usable_mrf - base_mrf) % 2 == 0);
/* First mrf is the g0-based message header containing URB handles and
* such.
*/
emit_urb_write_header(mrf++);
if (devinfo->gen < 6) {
emit_ndc_computation();
}
/* We may need to split this up into several URB writes, so do them in a
* loop.
*/
int slot = 0;
bool complete = false;
do {
/* URB offset is in URB row increments, and each of our MRFs is half of
* one of those, since we're doing interleaved writes.
*/
int offset = slot / 2;
mrf = base_mrf + 1;
for (; slot < prog_data->vue_map.num_slots; ++slot) {
emit_urb_slot(dst_reg(MRF, mrf++),
prog_data->vue_map.slot_to_varying[slot]);
/* If this was max_usable_mrf, we can't fit anything more into this
* URB WRITE. Same thing if we reached the maximum length available.
*/
if (mrf > max_usable_mrf ||
align_interleaved_urb_mlen(devinfo, mrf - base_mrf + 1) > BRW_MAX_MSG_LENGTH) {
slot++;
break;
}
}
complete = slot >= prog_data->vue_map.num_slots;
current_annotation = "URB write";
vec4_instruction *inst = emit_urb_write_opcode(complete);
inst->base_mrf = base_mrf;
inst->mlen = align_interleaved_urb_mlen(devinfo, mrf - base_mrf);
inst->offset += offset;
} while(!complete);
}
src_reg
vec4_visitor::get_scratch_offset(bblock_t *block, vec4_instruction *inst,
src_reg *reladdr, int reg_offset)
{
/* Because we store the values to scratch interleaved like our
* vertex data, we need to scale the vec4 index by 2.
*/
int message_header_scale = 2;
/* Pre-gen6, the message header uses byte offsets instead of vec4
* (16-byte) offset units.
*/
if (devinfo->gen < 6)
message_header_scale *= 16;
if (reladdr) {
/* A vec4 is 16 bytes and a dvec4 is 32 bytes so for doubles we have
* to multiply the reladdr by 2. Notice that the reg_offset part
* is in units of 16 bytes and is used to select the low/high 16-byte
* chunk of a full dvec4, so we don't want to multiply that part.
*/
src_reg index = src_reg(this, glsl_type::int_type);
if (type_sz(inst->dst.type) < 8) {
emit_before(block, inst, ADD(dst_reg(index), *reladdr,
brw_imm_d(reg_offset)));
emit_before(block, inst, MUL(dst_reg(index), index,
brw_imm_d(message_header_scale)));
} else {
emit_before(block, inst, MUL(dst_reg(index), *reladdr,
brw_imm_d(message_header_scale * 2)));
emit_before(block, inst, ADD(dst_reg(index), index,
brw_imm_d(reg_offset * message_header_scale)));
}
return index;
} else {
return brw_imm_d(reg_offset * message_header_scale);
}
}
/**
* Emits an instruction before @inst to load the value named by @orig_src
* from scratch space at @base_offset to @temp.
*
* @base_offset is measured in 32-byte units (the size of a register).
*/
void
vec4_visitor::emit_scratch_read(bblock_t *block, vec4_instruction *inst,
dst_reg temp, src_reg orig_src,
int base_offset)
{
assert(orig_src.offset % REG_SIZE == 0);
int reg_offset = base_offset + orig_src.offset / REG_SIZE;
src_reg index = get_scratch_offset(block, inst, orig_src.reladdr,
reg_offset);
if (type_sz(orig_src.type) < 8) {
emit_before(block, inst, SCRATCH_READ(temp, index));
} else {
dst_reg shuffled = dst_reg(this, glsl_type::dvec4_type);
dst_reg shuffled_float = retype(shuffled, BRW_REGISTER_TYPE_F);
emit_before(block, inst, SCRATCH_READ(shuffled_float, index));
index = get_scratch_offset(block, inst, orig_src.reladdr, reg_offset + 1);
vec4_instruction *last_read =
SCRATCH_READ(byte_offset(shuffled_float, REG_SIZE), index);
emit_before(block, inst, last_read);
shuffle_64bit_data(temp, src_reg(shuffled), false, block, last_read);
}
}
/**
* Emits an instruction after @inst to store the value to be written
* to @orig_dst to scratch space at @base_offset, from @temp.
*
* @base_offset is measured in 32-byte units (the size of a register).
*/
void
vec4_visitor::emit_scratch_write(bblock_t *block, vec4_instruction *inst,
int base_offset)
{
assert(inst->dst.offset % REG_SIZE == 0);
int reg_offset = base_offset + inst->dst.offset / REG_SIZE;
src_reg index = get_scratch_offset(block, inst, inst->dst.reladdr,
reg_offset);
/* Create a temporary register to store *inst's result in.
*
* We have to be careful in MOVing from our temporary result register in
* the scratch write. If we swizzle from channels of the temporary that
* weren't initialized, it will confuse live interval analysis, which will
* make spilling fail to make progress.
*/
bool is_64bit = type_sz(inst->dst.type) == 8;
const glsl_type *alloc_type =
is_64bit ? glsl_type::dvec4_type : glsl_type::vec4_type;
const src_reg temp = swizzle(retype(src_reg(this, alloc_type),
inst->dst.type),
brw_swizzle_for_mask(inst->dst.writemask));
if (!is_64bit) {
dst_reg dst = dst_reg(brw_writemask(brw_vec8_grf(0, 0),
inst->dst.writemask));
vec4_instruction *write = SCRATCH_WRITE(dst, temp, index);
if (inst->opcode != BRW_OPCODE_SEL)
write->predicate = inst->predicate;
write->ir = inst->ir;
write->annotation = inst->annotation;
inst->insert_after(block, write);
} else {
dst_reg shuffled = dst_reg(this, alloc_type);
vec4_instruction *last =
shuffle_64bit_data(shuffled, temp, true, block, inst);
src_reg shuffled_float = src_reg(retype(shuffled, BRW_REGISTER_TYPE_F));
uint8_t mask = 0;
if (inst->dst.writemask & WRITEMASK_X)
mask |= WRITEMASK_XY;
if (inst->dst.writemask & WRITEMASK_Y)
mask |= WRITEMASK_ZW;
if (mask) {
dst_reg dst = dst_reg(brw_writemask(brw_vec8_grf(0, 0), mask));
vec4_instruction *write = SCRATCH_WRITE(dst, shuffled_float, index);
if (inst->opcode != BRW_OPCODE_SEL)
write->predicate = inst->predicate;
write->ir = inst->ir;
write->annotation = inst->annotation;
last->insert_after(block, write);
}
mask = 0;
if (inst->dst.writemask & WRITEMASK_Z)
mask |= WRITEMASK_XY;
if (inst->dst.writemask & WRITEMASK_W)
mask |= WRITEMASK_ZW;
if (mask) {
dst_reg dst = dst_reg(brw_writemask(brw_vec8_grf(0, 0), mask));
src_reg index = get_scratch_offset(block, inst, inst->dst.reladdr,
reg_offset + 1);
vec4_instruction *write =
SCRATCH_WRITE(dst, byte_offset(shuffled_float, REG_SIZE), index);
if (inst->opcode != BRW_OPCODE_SEL)
write->predicate = inst->predicate;
write->ir = inst->ir;
write->annotation = inst->annotation;
last->insert_after(block, write);
}
}
inst->dst.file = temp.file;
inst->dst.nr = temp.nr;
inst->dst.offset %= REG_SIZE;
inst->dst.reladdr = NULL;
}
/**
* Checks if \p src and/or \p src.reladdr require a scratch read, and if so,
* adds the scratch read(s) before \p inst. The function also checks for
* recursive reladdr scratch accesses, issuing the corresponding scratch
* loads and rewriting reladdr references accordingly.
*
* \return \p src if it did not require a scratch load, otherwise, the
* register holding the result of the scratch load that the caller should
* use to rewrite src.
*/
src_reg
vec4_visitor::emit_resolve_reladdr(int scratch_loc[], bblock_t *block,
vec4_instruction *inst, src_reg src)
{
/* Resolve recursive reladdr scratch access by calling ourselves
* with src.reladdr
*/
if (src.reladdr)
*src.reladdr = emit_resolve_reladdr(scratch_loc, block, inst,
*src.reladdr);
/* Now handle scratch access on src */
if (src.file == VGRF && scratch_loc[src.nr] != -1) {
dst_reg temp = dst_reg(this, type_sz(src.type) == 8 ?
glsl_type::dvec4_type : glsl_type::vec4_type);
emit_scratch_read(block, inst, temp, src, scratch_loc[src.nr]);
src.nr = temp.nr;
src.offset %= REG_SIZE;
src.reladdr = NULL;
}
return src;
}
/**
* We can't generally support array access in GRF space, because a
* single instruction's destination can only span 2 contiguous
* registers. So, we send all GRF arrays that get variable index
* access to scratch space.
*/
void
vec4_visitor::move_grf_array_access_to_scratch()
{
int scratch_loc[this->alloc.count];
memset(scratch_loc, -1, sizeof(scratch_loc));
/* First, calculate the set of virtual GRFs that need to be punted
* to scratch due to having any array access on them, and where in
* scratch.
*/
foreach_block_and_inst(block, vec4_instruction, inst, cfg) {
if (inst->dst.file == VGRF && inst->dst.reladdr) {
if (scratch_loc[inst->dst.nr] == -1) {
scratch_loc[inst->dst.nr] = last_scratch;
last_scratch += this->alloc.sizes[inst->dst.nr];
}
for (src_reg *iter = inst->dst.reladdr;
iter->reladdr;
iter = iter->reladdr) {
if (iter->file == VGRF && scratch_loc[iter->nr] == -1) {
scratch_loc[iter->nr] = last_scratch;
last_scratch += this->alloc.sizes[iter->nr];
}
}
}
for (int i = 0 ; i < 3; i++) {
for (src_reg *iter = &inst->src[i];
iter->reladdr;
iter = iter->reladdr) {
if (iter->file == VGRF && scratch_loc[iter->nr] == -1) {
scratch_loc[iter->nr] = last_scratch;
last_scratch += this->alloc.sizes[iter->nr];
}
}
}
}
/* Now, for anything that will be accessed through scratch, rewrite
* it to load/store. Note that this is a _safe list walk, because
* we may generate a new scratch_write instruction after the one
* we're processing.
*/
foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) {
/* Set up the annotation tracking for new generated instructions. */
base_ir = inst->ir;
current_annotation = inst->annotation;
/* First handle scratch access on the dst. Notice we have to handle
* the case where the dst's reladdr also points to scratch space.
*/
if (inst->dst.reladdr)
*inst->dst.reladdr = emit_resolve_reladdr(scratch_loc, block, inst,
*inst->dst.reladdr);
/* Now that we have handled any (possibly recursive) reladdr scratch
* accesses for dst we can safely do the scratch write for dst itself
*/
if (inst->dst.file == VGRF && scratch_loc[inst->dst.nr] != -1)
emit_scratch_write(block, inst, scratch_loc[inst->dst.nr]);
/* Now handle scratch access on any src. In this case, since inst->src[i]
* already is a src_reg, we can just call emit_resolve_reladdr with
* inst->src[i] and it will take care of handling scratch loads for
* both src and src.reladdr (recursively).
*/
for (int i = 0 ; i < 3; i++) {
inst->src[i] = emit_resolve_reladdr(scratch_loc, block, inst,
inst->src[i]);
}
}
}
/**
* Emits an instruction before @inst to load the value named by @orig_src
* from the pull constant buffer (surface) at @base_offset to @temp.
*/
void
vec4_visitor::emit_pull_constant_load(bblock_t *block, vec4_instruction *inst,
dst_reg temp, src_reg orig_src,
int base_offset, src_reg indirect)
{
assert(orig_src.offset % 16 == 0);
const unsigned index = prog_data->base.binding_table.pull_constants_start;
/* For 64bit loads we need to emit two 32-bit load messages and we also
* we need to shuffle the 32-bit data result into proper 64-bit data. To do
* that we emit the 32-bit loads into a temporary and we shuffle the result
* into the original destination.
*/
dst_reg orig_temp = temp;
bool is_64bit = type_sz(orig_src.type) == 8;
if (is_64bit) {
assert(type_sz(temp.type) == 8);
dst_reg temp_df = dst_reg(this, glsl_type::dvec4_type);
temp = retype(temp_df, BRW_REGISTER_TYPE_F);
}
src_reg src = orig_src;
for (int i = 0; i < (is_64bit ? 2 : 1); i++) {
int reg_offset = base_offset + src.offset / 16;
src_reg offset;
if (indirect.file != BAD_FILE) {
offset = src_reg(this, glsl_type::uint_type);
emit_before(block, inst, ADD(dst_reg(offset), indirect,
brw_imm_ud(reg_offset * 16)));
} else if (devinfo->gen >= 8) {
/* Store the offset in a GRF so we can send-from-GRF. */
offset = src_reg(this, glsl_type::uint_type);
emit_before(block, inst, MOV(dst_reg(offset),
brw_imm_ud(reg_offset * 16)));
} else {
offset = brw_imm_d(reg_offset * 16);
}
emit_pull_constant_load_reg(byte_offset(temp, i * REG_SIZE),
brw_imm_ud(index),
offset,
block, inst);
src = byte_offset(src, 16);
}
brw_mark_surface_used(&prog_data->base, index);
if (is_64bit) {
temp = retype(temp, BRW_REGISTER_TYPE_DF);
shuffle_64bit_data(orig_temp, src_reg(temp), false, block, inst);
}
}
/**
* Implements array access of uniforms by inserting a
* PULL_CONSTANT_LOAD instruction.
*
* Unlike temporary GRF array access (where we don't support it due to
* the difficulty of doing relative addressing on instruction
* destinations), we could potentially do array access of uniforms
* that were loaded in GRF space as push constants. In real-world
* usage we've seen, though, the arrays being used are always larger
* than we could load as push constants, so just always move all
* uniform array access out to a pull constant buffer.
*/
void
vec4_visitor::move_uniform_array_access_to_pull_constants()
{
/* The vulkan dirver doesn't support pull constants other than UBOs so
* everything has to be pushed regardless.
*/
if (!compiler->supports_pull_constants) {
split_uniform_registers();
return;
}
/* Allocate the pull_params array */
assert(stage_prog_data->nr_pull_params == 0);
stage_prog_data->pull_param = ralloc_array(mem_ctx, uint32_t,
this->uniforms * 4);
int pull_constant_loc[this->uniforms];
memset(pull_constant_loc, -1, sizeof(pull_constant_loc));
/* First, walk through the instructions and determine which things need to
* be pulled. We mark something as needing to be pulled by setting
* pull_constant_loc to 0.
*/
foreach_block_and_inst(block, vec4_instruction, inst, cfg) {
/* We only care about MOV_INDIRECT of a uniform */
if (inst->opcode != SHADER_OPCODE_MOV_INDIRECT ||
inst->src[0].file != UNIFORM)
continue;
int uniform_nr = inst->src[0].nr + inst->src[0].offset / 16;
for (unsigned j = 0; j < DIV_ROUND_UP(inst->src[2].ud, 16); j++)
pull_constant_loc[uniform_nr + j] = 0;
}
/* Next, we walk the list of uniforms and assign real pull constant
* locations and set their corresponding entries in pull_param.
*/
for (int j = 0; j < this->uniforms; j++) {
if (pull_constant_loc[j] < 0)
continue;
pull_constant_loc[j] = stage_prog_data->nr_pull_params / 4;
for (int i = 0; i < 4; i++) {
stage_prog_data->pull_param[stage_prog_data->nr_pull_params++]
= stage_prog_data->param[j * 4 + i];
}
}
/* Finally, we can walk through the instructions and lower MOV_INDIRECT
* instructions to actual uniform pulls.
*/
foreach_block_and_inst_safe(block, vec4_instruction, inst, cfg) {
/* We only care about MOV_INDIRECT of a uniform */
if (inst->opcode != SHADER_OPCODE_MOV_INDIRECT ||
inst->src[0].file != UNIFORM)
continue;
int uniform_nr = inst->src[0].nr + inst->src[0].offset / 16;
assert(inst->src[0].swizzle == BRW_SWIZZLE_NOOP);
emit_pull_constant_load(block, inst, inst->dst, inst->src[0],
pull_constant_loc[uniform_nr], inst->src[1]);
inst->remove(block);
}
/* Now there are no accesses of the UNIFORM file with a reladdr, so
* no need to track them as larger-than-vec4 objects. This will be
* relied on in cutting out unused uniform vectors from push
* constants.
*/
split_uniform_registers();
}
void
vec4_visitor::resolve_ud_negate(src_reg *reg)
{
if (reg->type != BRW_REGISTER_TYPE_UD ||
!reg->negate)
return;
src_reg temp = src_reg(this, glsl_type::uvec4_type);
emit(BRW_OPCODE_MOV, dst_reg(temp), *reg);
*reg = temp;
}
vec4_visitor::vec4_visitor(const struct brw_compiler *compiler,
void *log_data,
const struct brw_sampler_prog_key_data *key_tex,
struct brw_vue_prog_data *prog_data,
const nir_shader *shader,
void *mem_ctx,
bool no_spills,
int shader_time_index)
: backend_shader(compiler, log_data, mem_ctx, shader, &prog_data->base),
key_tex(key_tex),
prog_data(prog_data),
fail_msg(NULL),
first_non_payload_grf(0),
need_all_constants_in_pull_buffer(false),
no_spills(no_spills),
shader_time_index(shader_time_index),
last_scratch(0)
{
this->failed = false;
this->base_ir = NULL;
this->current_annotation = NULL;
memset(this->output_reg_annotation, 0, sizeof(this->output_reg_annotation));
memset(this->output_num_components, 0, sizeof(this->output_num_components));
this->virtual_grf_start = NULL;
this->virtual_grf_end = NULL;
this->live_intervals = NULL;
this->max_grf = devinfo->gen >= 7 ? GEN7_MRF_HACK_START : BRW_MAX_GRF;
this->uniforms = 0;
}
void
vec4_visitor::fail(const char *format, ...)
{
va_list va;
char *msg;
if (failed)
return;
failed = true;
va_start(va, format);
msg = ralloc_vasprintf(mem_ctx, format, va);
va_end(va);
msg = ralloc_asprintf(mem_ctx, "%s compile failed: %s\n", stage_abbrev, msg);
this->fail_msg = msg;
if (debug_enabled) {
fprintf(stderr, "%s", msg);
}
}
} /* namespace brw */