/*
* Copyright © 2015 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#include <assert.h>
#include <stdbool.h>
#include "anv_private.h"
#include "vk_format_info.h"
#include "vk_util.h"
#include "common/gen_l3_config.h"
#include "genxml/gen_macros.h"
#include "genxml/genX_pack.h"
static void
emit_lrm(struct anv_batch *batch,
uint32_t reg, struct anv_bo *bo, uint32_t offset)
{
anv_batch_emit(batch, GENX(MI_LOAD_REGISTER_MEM), lrm) {
lrm.RegisterAddress = reg;
lrm.MemoryAddress = (struct anv_address) { bo, offset };
}
}
static void
emit_lri(struct anv_batch *batch, uint32_t reg, uint32_t imm)
{
anv_batch_emit(batch, GENX(MI_LOAD_REGISTER_IMM), lri) {
lri.RegisterOffset = reg;
lri.DataDWord = imm;
}
}
#if GEN_IS_HASWELL || GEN_GEN >= 8
static void
emit_lrr(struct anv_batch *batch, uint32_t dst, uint32_t src)
{
anv_batch_emit(batch, GENX(MI_LOAD_REGISTER_REG), lrr) {
lrr.SourceRegisterAddress = src;
lrr.DestinationRegisterAddress = dst;
}
}
#endif
void
genX(cmd_buffer_emit_state_base_address)(struct anv_cmd_buffer *cmd_buffer)
{
struct anv_device *device = cmd_buffer->device;
/* Emit a render target cache flush.
*
* This isn't documented anywhere in the PRM. However, it seems to be
* necessary prior to changing the surface state base adress. Without
* this, we get GPU hangs when using multi-level command buffers which
* clear depth, reset state base address, and then go render stuff.
*/
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
pc.DCFlushEnable = true;
pc.RenderTargetCacheFlushEnable = true;
pc.CommandStreamerStallEnable = true;
}
anv_batch_emit(&cmd_buffer->batch, GENX(STATE_BASE_ADDRESS), sba) {
sba.GeneralStateBaseAddress = (struct anv_address) { NULL, 0 };
sba.GeneralStateMemoryObjectControlState = GENX(MOCS);
sba.GeneralStateBaseAddressModifyEnable = true;
sba.SurfaceStateBaseAddress =
anv_cmd_buffer_surface_base_address(cmd_buffer);
sba.SurfaceStateMemoryObjectControlState = GENX(MOCS);
sba.SurfaceStateBaseAddressModifyEnable = true;
sba.DynamicStateBaseAddress =
(struct anv_address) { &device->dynamic_state_pool.block_pool.bo, 0 };
sba.DynamicStateMemoryObjectControlState = GENX(MOCS);
sba.DynamicStateBaseAddressModifyEnable = true;
sba.IndirectObjectBaseAddress = (struct anv_address) { NULL, 0 };
sba.IndirectObjectMemoryObjectControlState = GENX(MOCS);
sba.IndirectObjectBaseAddressModifyEnable = true;
sba.InstructionBaseAddress =
(struct anv_address) { &device->instruction_state_pool.block_pool.bo, 0 };
sba.InstructionMemoryObjectControlState = GENX(MOCS);
sba.InstructionBaseAddressModifyEnable = true;
# if (GEN_GEN >= 8)
/* Broadwell requires that we specify a buffer size for a bunch of
* these fields. However, since we will be growing the BO's live, we
* just set them all to the maximum.
*/
sba.GeneralStateBufferSize = 0xfffff;
sba.GeneralStateBufferSizeModifyEnable = true;
sba.DynamicStateBufferSize = 0xfffff;
sba.DynamicStateBufferSizeModifyEnable = true;
sba.IndirectObjectBufferSize = 0xfffff;
sba.IndirectObjectBufferSizeModifyEnable = true;
sba.InstructionBufferSize = 0xfffff;
sba.InstructionBuffersizeModifyEnable = true;
# endif
}
/* After re-setting the surface state base address, we have to do some
* cache flusing so that the sampler engine will pick up the new
* SURFACE_STATE objects and binding tables. From the Broadwell PRM,
* Shared Function > 3D Sampler > State > State Caching (page 96):
*
* Coherency with system memory in the state cache, like the texture
* cache is handled partially by software. It is expected that the
* command stream or shader will issue Cache Flush operation or
* Cache_Flush sampler message to ensure that the L1 cache remains
* coherent with system memory.
*
* [...]
*
* Whenever the value of the Dynamic_State_Base_Addr,
* Surface_State_Base_Addr are altered, the L1 state cache must be
* invalidated to ensure the new surface or sampler state is fetched
* from system memory.
*
* The PIPE_CONTROL command has a "State Cache Invalidation Enable" bit
* which, according the PIPE_CONTROL instruction documentation in the
* Broadwell PRM:
*
* Setting this bit is independent of any other bit in this packet.
* This bit controls the invalidation of the L1 and L2 state caches
* at the top of the pipe i.e. at the parsing time.
*
* Unfortunately, experimentation seems to indicate that state cache
* invalidation through a PIPE_CONTROL does nothing whatsoever in
* regards to surface state and binding tables. In stead, it seems that
* invalidating the texture cache is what is actually needed.
*
* XXX: As far as we have been able to determine through
* experimentation, shows that flush the texture cache appears to be
* sufficient. The theory here is that all of the sampling/rendering
* units cache the binding table in the texture cache. However, we have
* yet to be able to actually confirm this.
*/
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
pc.TextureCacheInvalidationEnable = true;
pc.ConstantCacheInvalidationEnable = true;
pc.StateCacheInvalidationEnable = true;
}
}
static void
add_surface_state_reloc(struct anv_cmd_buffer *cmd_buffer,
struct anv_state state,
struct anv_bo *bo, uint32_t offset)
{
const struct isl_device *isl_dev = &cmd_buffer->device->isl_dev;
VkResult result =
anv_reloc_list_add(&cmd_buffer->surface_relocs, &cmd_buffer->pool->alloc,
state.offset + isl_dev->ss.addr_offset, bo, offset);
if (result != VK_SUCCESS)
anv_batch_set_error(&cmd_buffer->batch, result);
}
static void
add_image_view_relocs(struct anv_cmd_buffer *cmd_buffer,
const struct anv_image_view *image_view,
const uint32_t plane,
struct anv_surface_state state)
{
const struct isl_device *isl_dev = &cmd_buffer->device->isl_dev;
const struct anv_image *image = image_view->image;
uint32_t image_plane = image_view->planes[plane].image_plane;
add_surface_state_reloc(cmd_buffer, state.state,
image->planes[image_plane].bo, state.address);
if (state.aux_address) {
VkResult result =
anv_reloc_list_add(&cmd_buffer->surface_relocs,
&cmd_buffer->pool->alloc,
state.state.offset + isl_dev->ss.aux_addr_offset,
image->planes[image_plane].bo, state.aux_address);
if (result != VK_SUCCESS)
anv_batch_set_error(&cmd_buffer->batch, result);
}
}
static bool
color_is_zero_one(VkClearColorValue value, enum isl_format format)
{
if (isl_format_has_int_channel(format)) {
for (unsigned i = 0; i < 4; i++) {
if (value.int32[i] != 0 && value.int32[i] != 1)
return false;
}
} else {
for (unsigned i = 0; i < 4; i++) {
if (value.float32[i] != 0.0f && value.float32[i] != 1.0f)
return false;
}
}
return true;
}
static void
color_attachment_compute_aux_usage(struct anv_device * device,
struct anv_cmd_state * cmd_state,
uint32_t att, VkRect2D render_area,
union isl_color_value *fast_clear_color)
{
struct anv_attachment_state *att_state = &cmd_state->attachments[att];
struct anv_image_view *iview = cmd_state->framebuffer->attachments[att];
assert(iview->n_planes == 1);
if (iview->planes[0].isl.base_array_layer >=
anv_image_aux_layers(iview->image, VK_IMAGE_ASPECT_COLOR_BIT,
iview->planes[0].isl.base_level)) {
/* There is no aux buffer which corresponds to the level and layer(s)
* being accessed.
*/
att_state->aux_usage = ISL_AUX_USAGE_NONE;
att_state->input_aux_usage = ISL_AUX_USAGE_NONE;
att_state->fast_clear = false;
return;
} else if (iview->image->planes[0].aux_usage == ISL_AUX_USAGE_MCS) {
att_state->aux_usage = ISL_AUX_USAGE_MCS;
att_state->input_aux_usage = ISL_AUX_USAGE_MCS;
att_state->fast_clear = false;
return;
} else if (iview->image->planes[0].aux_usage == ISL_AUX_USAGE_CCS_E) {
att_state->aux_usage = ISL_AUX_USAGE_CCS_E;
att_state->input_aux_usage = ISL_AUX_USAGE_CCS_E;
} else {
att_state->aux_usage = ISL_AUX_USAGE_CCS_D;
/* From the Sky Lake PRM, RENDER_SURFACE_STATE::AuxiliarySurfaceMode:
*
* "If Number of Multisamples is MULTISAMPLECOUNT_1, AUX_CCS_D
* setting is only allowed if Surface Format supported for Fast
* Clear. In addition, if the surface is bound to the sampling
* engine, Surface Format must be supported for Render Target
* Compression for surfaces bound to the sampling engine."
*
* In other words, we can only sample from a fast-cleared image if it
* also supports color compression.
*/
if (isl_format_supports_ccs_e(&device->info, iview->planes[0].isl.format)) {
att_state->input_aux_usage = ISL_AUX_USAGE_CCS_D;
/* While fast-clear resolves and partial resolves are fairly cheap in the
* case where you render to most of the pixels, full resolves are not
* because they potentially involve reading and writing the entire
* framebuffer. If we can't texture with CCS_E, we should leave it off and
* limit ourselves to fast clears.
*/
if (cmd_state->pass->attachments[att].first_subpass_layout ==
VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL) {
anv_perf_warn(device->instance, iview->image,
"Not temporarily enabling CCS_E.");
}
} else {
att_state->input_aux_usage = ISL_AUX_USAGE_NONE;
}
}
assert(iview->image->planes[0].aux_surface.isl.usage & ISL_SURF_USAGE_CCS_BIT);
att_state->clear_color_is_zero_one =
color_is_zero_one(att_state->clear_value.color, iview->planes[0].isl.format);
att_state->clear_color_is_zero =
att_state->clear_value.color.uint32[0] == 0 &&
att_state->clear_value.color.uint32[1] == 0 &&
att_state->clear_value.color.uint32[2] == 0 &&
att_state->clear_value.color.uint32[3] == 0;
if (att_state->pending_clear_aspects == VK_IMAGE_ASPECT_COLOR_BIT) {
/* Start off assuming fast clears are possible */
att_state->fast_clear = true;
/* Potentially, we could do partial fast-clears but doing so has crazy
* alignment restrictions. It's easier to just restrict to full size
* fast clears for now.
*/
if (render_area.offset.x != 0 ||
render_area.offset.y != 0 ||
render_area.extent.width != iview->extent.width ||
render_area.extent.height != iview->extent.height)
att_state->fast_clear = false;
/* On Broadwell and earlier, we can only handle 0/1 clear colors */
if (GEN_GEN <= 8 && !att_state->clear_color_is_zero_one)
att_state->fast_clear = false;
/* We allow fast clears when all aux layers of the miplevel are targeted.
* See add_fast_clear_state_buffer() for more information. Also, because
* we only either do a fast clear or a normal clear and not both, this
* complies with the gen7 restriction of not fast-clearing multiple
* layers.
*/
if (cmd_state->framebuffer->layers !=
anv_image_aux_layers(iview->image, VK_IMAGE_ASPECT_COLOR_BIT,
iview->planes[0].isl.base_level)) {
att_state->fast_clear = false;
if (GEN_GEN == 7) {
anv_perf_warn(device->instance, iview->image,
"Not fast-clearing the first layer in "
"a multi-layer fast clear.");
}
}
/* We only allow fast clears in the GENERAL layout if the auxiliary
* buffer is always enabled and the fast-clear value is all 0's. See
* add_fast_clear_state_buffer() for more information.
*/
if (cmd_state->pass->attachments[att].first_subpass_layout ==
VK_IMAGE_LAYOUT_GENERAL &&
(!att_state->clear_color_is_zero ||
iview->image->planes[0].aux_usage == ISL_AUX_USAGE_NONE)) {
att_state->fast_clear = false;
}
if (att_state->fast_clear) {
memcpy(fast_clear_color->u32, att_state->clear_value.color.uint32,
sizeof(fast_clear_color->u32));
}
} else {
att_state->fast_clear = false;
}
}
static bool
need_input_attachment_state(const struct anv_render_pass_attachment *att)
{
if (!(att->usage & VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT))
return false;
/* We only allocate input attachment states for color surfaces. Compression
* is not yet enabled for depth textures and stencil doesn't allow
* compression so we can just use the texture surface state from the view.
*/
return vk_format_is_color(att->format);
}
/* Transitions a HiZ-enabled depth buffer from one layout to another. Unless
* the initial layout is undefined, the HiZ buffer and depth buffer will
* represent the same data at the end of this operation.
*/
static void
transition_depth_buffer(struct anv_cmd_buffer *cmd_buffer,
const struct anv_image *image,
VkImageLayout initial_layout,
VkImageLayout final_layout)
{
assert(image);
/* A transition is a no-op if HiZ is not enabled, or if the initial and
* final layouts are equal.
*
* The undefined layout indicates that the user doesn't care about the data
* that's currently in the buffer. Therefore, a data-preserving resolve
* operation is not needed.
*/
if (image->planes[0].aux_usage != ISL_AUX_USAGE_HIZ || initial_layout == final_layout)
return;
const bool hiz_enabled = ISL_AUX_USAGE_HIZ ==
anv_layout_to_aux_usage(&cmd_buffer->device->info, image,
VK_IMAGE_ASPECT_DEPTH_BIT, initial_layout);
const bool enable_hiz = ISL_AUX_USAGE_HIZ ==
anv_layout_to_aux_usage(&cmd_buffer->device->info, image,
VK_IMAGE_ASPECT_DEPTH_BIT, final_layout);
enum blorp_hiz_op hiz_op;
if (hiz_enabled && !enable_hiz) {
hiz_op = BLORP_HIZ_OP_DEPTH_RESOLVE;
} else if (!hiz_enabled && enable_hiz) {
hiz_op = BLORP_HIZ_OP_HIZ_RESOLVE;
} else {
assert(hiz_enabled == enable_hiz);
/* If the same buffer will be used, no resolves are necessary. */
hiz_op = BLORP_HIZ_OP_NONE;
}
if (hiz_op != BLORP_HIZ_OP_NONE)
anv_gen8_hiz_op_resolve(cmd_buffer, image, hiz_op);
}
#define MI_PREDICATE_SRC0 0x2400
#define MI_PREDICATE_SRC1 0x2408
/* Manages the state of an color image subresource to ensure resolves are
* performed properly.
*/
static void
genX(set_image_needs_resolve)(struct anv_cmd_buffer *cmd_buffer,
const struct anv_image *image,
VkImageAspectFlagBits aspect,
unsigned level, bool needs_resolve)
{
assert(cmd_buffer && image);
assert(image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV);
assert(level < anv_image_aux_levels(image, aspect));
/* The HW docs say that there is no way to guarantee the completion of
* the following command. We use it nevertheless because it shows no
* issues in testing is currently being used in the GL driver.
*/
anv_batch_emit(&cmd_buffer->batch, GENX(MI_STORE_DATA_IMM), sdi) {
sdi.Address = anv_image_get_needs_resolve_addr(cmd_buffer->device,
image, aspect, level);
sdi.ImmediateData = needs_resolve;
}
}
static void
genX(load_needs_resolve_predicate)(struct anv_cmd_buffer *cmd_buffer,
const struct anv_image *image,
VkImageAspectFlagBits aspect,
unsigned level)
{
assert(cmd_buffer && image);
assert(image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV);
assert(level < anv_image_aux_levels(image, aspect));
const struct anv_address resolve_flag_addr =
anv_image_get_needs_resolve_addr(cmd_buffer->device,
image, aspect, level);
/* Make the pending predicated resolve a no-op if one is not needed.
* predicate = do_resolve = resolve_flag != 0;
*/
emit_lri(&cmd_buffer->batch, MI_PREDICATE_SRC1 , 0);
emit_lri(&cmd_buffer->batch, MI_PREDICATE_SRC1 + 4, 0);
emit_lri(&cmd_buffer->batch, MI_PREDICATE_SRC0 , 0);
emit_lrm(&cmd_buffer->batch, MI_PREDICATE_SRC0 + 4,
resolve_flag_addr.bo, resolve_flag_addr.offset);
anv_batch_emit(&cmd_buffer->batch, GENX(MI_PREDICATE), mip) {
mip.LoadOperation = LOAD_LOADINV;
mip.CombineOperation = COMBINE_SET;
mip.CompareOperation = COMPARE_SRCS_EQUAL;
}
}
static void
init_fast_clear_state_entry(struct anv_cmd_buffer *cmd_buffer,
const struct anv_image *image,
VkImageAspectFlagBits aspect,
unsigned level)
{
assert(cmd_buffer && image);
assert(image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV);
assert(level < anv_image_aux_levels(image, aspect));
uint32_t plane = anv_image_aspect_to_plane(image->aspects, aspect);
enum isl_aux_usage aux_usage = image->planes[plane].aux_usage;
/* The resolve flag should updated to signify that fast-clear/compression
* data needs to be removed when leaving the undefined layout. Such data
* may need to be removed if it would cause accesses to the color buffer
* to return incorrect data. The fast clear data in CCS_D buffers should
* be removed because CCS_D isn't enabled all the time.
*/
genX(set_image_needs_resolve)(cmd_buffer, image, aspect, level,
aux_usage == ISL_AUX_USAGE_NONE);
/* The fast clear value dword(s) will be copied into a surface state object.
* Ensure that the restrictions of the fields in the dword(s) are followed.
*
* CCS buffers on SKL+ can have any value set for the clear colors.
*/
if (image->samples == 1 && GEN_GEN >= 9)
return;
/* Other combinations of auxiliary buffers and platforms require specific
* values in the clear value dword(s).
*/
struct anv_address addr =
anv_image_get_clear_color_addr(cmd_buffer->device, image, aspect, level);
unsigned i = 0;
for (; i < cmd_buffer->device->isl_dev.ss.clear_value_size; i += 4) {
anv_batch_emit(&cmd_buffer->batch, GENX(MI_STORE_DATA_IMM), sdi) {
sdi.Address = addr;
if (GEN_GEN >= 9) {
/* MCS buffers on SKL+ can only have 1/0 clear colors. */
assert(aux_usage == ISL_AUX_USAGE_MCS);
sdi.ImmediateData = 0;
} else if (GEN_VERSIONx10 >= 75) {
/* Pre-SKL, the dword containing the clear values also contains
* other fields, so we need to initialize those fields to match the
* values that would be in a color attachment.
*/
assert(i == 0);
sdi.ImmediateData = ISL_CHANNEL_SELECT_RED << 25 |
ISL_CHANNEL_SELECT_GREEN << 22 |
ISL_CHANNEL_SELECT_BLUE << 19 |
ISL_CHANNEL_SELECT_ALPHA << 16;
} else if (GEN_VERSIONx10 == 70) {
/* On IVB, the dword containing the clear values also contains
* other fields that must be zero or can be zero.
*/
assert(i == 0);
sdi.ImmediateData = 0;
}
}
addr.offset += 4;
}
}
/* Copy the fast-clear value dword(s) between a surface state object and an
* image's fast clear state buffer.
*/
static void
genX(copy_fast_clear_dwords)(struct anv_cmd_buffer *cmd_buffer,
struct anv_state surface_state,
const struct anv_image *image,
VkImageAspectFlagBits aspect,
unsigned level,
bool copy_from_surface_state)
{
assert(cmd_buffer && image);
assert(image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV);
assert(level < anv_image_aux_levels(image, aspect));
struct anv_bo *ss_bo =
&cmd_buffer->device->surface_state_pool.block_pool.bo;
uint32_t ss_clear_offset = surface_state.offset +
cmd_buffer->device->isl_dev.ss.clear_value_offset;
const struct anv_address entry_addr =
anv_image_get_clear_color_addr(cmd_buffer->device, image, aspect, level);
unsigned copy_size = cmd_buffer->device->isl_dev.ss.clear_value_size;
if (copy_from_surface_state) {
genX(cmd_buffer_mi_memcpy)(cmd_buffer, entry_addr.bo, entry_addr.offset,
ss_bo, ss_clear_offset, copy_size);
} else {
genX(cmd_buffer_mi_memcpy)(cmd_buffer, ss_bo, ss_clear_offset,
entry_addr.bo, entry_addr.offset, copy_size);
/* Updating a surface state object may require that the state cache be
* invalidated. From the SKL PRM, Shared Functions -> State -> State
* Caching:
*
* Whenever the RENDER_SURFACE_STATE object in memory pointed to by
* the Binding Table Pointer (BTP) and Binding Table Index (BTI) is
* modified [...], the L1 state cache must be invalidated to ensure
* the new surface or sampler state is fetched from system memory.
*
* In testing, SKL doesn't actually seem to need this, but HSW does.
*/
cmd_buffer->state.pending_pipe_bits |=
ANV_PIPE_STATE_CACHE_INVALIDATE_BIT;
}
}
/**
* @brief Transitions a color buffer from one layout to another.
*
* See section 6.1.1. Image Layout Transitions of the Vulkan 1.0.50 spec for
* more information.
*
* @param level_count VK_REMAINING_MIP_LEVELS isn't supported.
* @param layer_count VK_REMAINING_ARRAY_LAYERS isn't supported. For 3D images,
* this represents the maximum layers to transition at each
* specified miplevel.
*/
static void
transition_color_buffer(struct anv_cmd_buffer *cmd_buffer,
const struct anv_image *image,
VkImageAspectFlagBits aspect,
const uint32_t base_level, uint32_t level_count,
uint32_t base_layer, uint32_t layer_count,
VkImageLayout initial_layout,
VkImageLayout final_layout)
{
/* Validate the inputs. */
assert(cmd_buffer);
assert(image && image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV);
/* These values aren't supported for simplicity's sake. */
assert(level_count != VK_REMAINING_MIP_LEVELS &&
layer_count != VK_REMAINING_ARRAY_LAYERS);
/* Ensure the subresource range is valid. */
uint64_t last_level_num = base_level + level_count;
const uint32_t max_depth = anv_minify(image->extent.depth, base_level);
UNUSED const uint32_t image_layers = MAX2(image->array_size, max_depth);
assert((uint64_t)base_layer + layer_count <= image_layers);
assert(last_level_num <= image->levels);
/* The spec disallows these final layouts. */
assert(final_layout != VK_IMAGE_LAYOUT_UNDEFINED &&
final_layout != VK_IMAGE_LAYOUT_PREINITIALIZED);
/* No work is necessary if the layout stays the same or if this subresource
* range lacks auxiliary data.
*/
if (initial_layout == final_layout)
return;
uint32_t plane = anv_image_aspect_to_plane(image->aspects, aspect);
if (image->planes[plane].shadow_surface.isl.size > 0 &&
final_layout == VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL) {
/* This surface is a linear compressed image with a tiled shadow surface
* for texturing. The client is about to use it in READ_ONLY_OPTIMAL so
* we need to ensure the shadow copy is up-to-date.
*/
assert(image->aspects == VK_IMAGE_ASPECT_COLOR_BIT);
assert(image->planes[plane].surface.isl.tiling == ISL_TILING_LINEAR);
assert(image->planes[plane].shadow_surface.isl.tiling != ISL_TILING_LINEAR);
assert(isl_format_is_compressed(image->planes[plane].surface.isl.format));
assert(plane == 0);
anv_image_copy_to_shadow(cmd_buffer, image,
base_level, level_count,
base_layer, layer_count);
}
if (base_layer >= anv_image_aux_layers(image, aspect, base_level))
return;
/* A transition of a 3D subresource works on all slices at a time. */
if (image->type == VK_IMAGE_TYPE_3D) {
base_layer = 0;
layer_count = anv_minify(image->extent.depth, base_level);
}
/* We're interested in the subresource range subset that has aux data. */
level_count = MIN2(level_count, anv_image_aux_levels(image, aspect) - base_level);
layer_count = MIN2(layer_count,
anv_image_aux_layers(image, aspect, base_level) - base_layer);
last_level_num = base_level + level_count;
/* Record whether or not the layout is undefined. Pre-initialized images
* with auxiliary buffers have a non-linear layout and are thus undefined.
*/
assert(image->tiling == VK_IMAGE_TILING_OPTIMAL);
const bool undef_layout = initial_layout == VK_IMAGE_LAYOUT_UNDEFINED ||
initial_layout == VK_IMAGE_LAYOUT_PREINITIALIZED;
/* Do preparatory work before the resolve operation or return early if no
* resolve is actually needed.
*/
if (undef_layout) {
/* A subresource in the undefined layout may have been aliased and
* populated with any arrangement of bits. Therefore, we must initialize
* the related aux buffer and clear buffer entry with desirable values.
*
* Initialize the relevant clear buffer entries.
*/
for (unsigned level = base_level; level < last_level_num; level++)
init_fast_clear_state_entry(cmd_buffer, image, aspect, level);
/* Initialize the aux buffers to enable correct rendering. This operation
* requires up to two steps: one to rid the aux buffer of data that may
* cause GPU hangs, and another to ensure that writes done without aux
* will be visible to reads done with aux.
*
* Having an aux buffer with invalid data is possible for CCS buffers
* SKL+ and for MCS buffers with certain sample counts (2x and 8x). One
* easy way to get to a valid state is to fast-clear the specified range.
*
* Even for MCS buffers that have sample counts that don't require
* certain bits to be reserved (4x and 8x), we're unsure if the hardware
* will be okay with the sample mappings given by the undefined buffer.
* We don't have any data to show that this is a problem, but we want to
* avoid causing difficult-to-debug problems.
*/
if ((GEN_GEN >= 9 && image->samples == 1) || image->samples > 1) {
if (image->samples == 4 || image->samples == 16) {
anv_perf_warn(cmd_buffer->device->instance, image,
"Doing a potentially unnecessary fast-clear to "
"define an MCS buffer.");
}
anv_image_fast_clear(cmd_buffer, image, aspect,
base_level, level_count,
base_layer, layer_count);
}
/* At this point, some elements of the CCS buffer may have the fast-clear
* bit-arrangement. As the user writes to a subresource, we need to have
* the associated CCS elements enter the ambiguated state. This enables
* reads (implicit or explicit) to reflect the user-written data instead
* of the clear color. The only time such elements will not change their
* state as described above, is in a final layout that doesn't have CCS
* enabled. In this case, we must force the associated CCS buffers of the
* specified range to enter the ambiguated state in advance.
*/
if (image->samples == 1 &&
image->planes[plane].aux_usage != ISL_AUX_USAGE_CCS_E &&
final_layout != VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL) {
/* The CCS_D buffer may not be enabled in the final layout. Continue
* executing this function to perform a resolve.
*/
anv_perf_warn(cmd_buffer->device->instance, image,
"Performing an additional resolve for CCS_D layout "
"transition. Consider always leaving it on or "
"performing an ambiguation pass.");
} else {
/* Writes in the final layout will be aware of the auxiliary buffer.
* In addition, the clear buffer entries and the auxiliary buffers
* have been populated with values that will result in correct
* rendering.
*/
return;
}
} else if (initial_layout != VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL) {
/* Resolves are only necessary if the subresource may contain blocks
* fast-cleared to values unsupported in other layouts. This only occurs
* if the initial layout is COLOR_ATTACHMENT_OPTIMAL.
*/
return;
} else if (image->samples > 1) {
/* MCS buffers don't need resolving. */
return;
}
/* Perform a resolve to synchronize data between the main and aux buffer.
* Before we begin, we must satisfy the cache flushing requirement specified
* in the Sky Lake PRM Vol. 7, "MCS Buffer for Render Target(s)":
*
* Any transition from any value in {Clear, Render, Resolve} to a
* different value in {Clear, Render, Resolve} requires end of pipe
* synchronization.
*
* We perform a flush of the write cache before and after the clear and
* resolve operations to meet this requirement.
*
* Unlike other drawing, fast clear operations are not properly
* synchronized. The first PIPE_CONTROL here likely ensures that the
* contents of the previous render or clear hit the render target before we
* resolve and the second likely ensures that the resolve is complete before
* we do any more rendering or clearing.
*/
cmd_buffer->state.pending_pipe_bits |=
ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT | ANV_PIPE_CS_STALL_BIT;
for (uint32_t level = base_level; level < last_level_num; level++) {
/* The number of layers changes at each 3D miplevel. */
if (image->type == VK_IMAGE_TYPE_3D) {
layer_count = MIN2(layer_count, anv_image_aux_layers(image, aspect, level));
}
genX(load_needs_resolve_predicate)(cmd_buffer, image, aspect, level);
anv_ccs_resolve(cmd_buffer, image, aspect, level, base_layer, layer_count,
image->planes[plane].aux_usage == ISL_AUX_USAGE_CCS_E ?
BLORP_FAST_CLEAR_OP_RESOLVE_PARTIAL :
BLORP_FAST_CLEAR_OP_RESOLVE_FULL);
genX(set_image_needs_resolve)(cmd_buffer, image, aspect, level, false);
}
cmd_buffer->state.pending_pipe_bits |=
ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT | ANV_PIPE_CS_STALL_BIT;
}
/**
* Setup anv_cmd_state::attachments for vkCmdBeginRenderPass.
*/
static VkResult
genX(cmd_buffer_setup_attachments)(struct anv_cmd_buffer *cmd_buffer,
struct anv_render_pass *pass,
const VkRenderPassBeginInfo *begin)
{
const struct isl_device *isl_dev = &cmd_buffer->device->isl_dev;
struct anv_cmd_state *state = &cmd_buffer->state;
vk_free(&cmd_buffer->pool->alloc, state->attachments);
if (pass->attachment_count > 0) {
state->attachments = vk_alloc(&cmd_buffer->pool->alloc,
pass->attachment_count *
sizeof(state->attachments[0]),
8, VK_SYSTEM_ALLOCATION_SCOPE_OBJECT);
if (state->attachments == NULL) {
/* Propagate VK_ERROR_OUT_OF_HOST_MEMORY to vkEndCommandBuffer */
return anv_batch_set_error(&cmd_buffer->batch,
VK_ERROR_OUT_OF_HOST_MEMORY);
}
} else {
state->attachments = NULL;
}
/* Reserve one for the NULL state. */
unsigned num_states = 1;
for (uint32_t i = 0; i < pass->attachment_count; ++i) {
if (vk_format_is_color(pass->attachments[i].format))
num_states++;
if (need_input_attachment_state(&pass->attachments[i]))
num_states++;
}
const uint32_t ss_stride = align_u32(isl_dev->ss.size, isl_dev->ss.align);
state->render_pass_states =
anv_state_stream_alloc(&cmd_buffer->surface_state_stream,
num_states * ss_stride, isl_dev->ss.align);
struct anv_state next_state = state->render_pass_states;
next_state.alloc_size = isl_dev->ss.size;
state->null_surface_state = next_state;
next_state.offset += ss_stride;
next_state.map += ss_stride;
for (uint32_t i = 0; i < pass->attachment_count; ++i) {
if (vk_format_is_color(pass->attachments[i].format)) {
state->attachments[i].color.state = next_state;
next_state.offset += ss_stride;
next_state.map += ss_stride;
}
if (need_input_attachment_state(&pass->attachments[i])) {
state->attachments[i].input.state = next_state;
next_state.offset += ss_stride;
next_state.map += ss_stride;
}
}
assert(next_state.offset == state->render_pass_states.offset +
state->render_pass_states.alloc_size);
if (begin) {
ANV_FROM_HANDLE(anv_framebuffer, framebuffer, begin->framebuffer);
assert(pass->attachment_count == framebuffer->attachment_count);
isl_null_fill_state(isl_dev, state->null_surface_state.map,
isl_extent3d(framebuffer->width,
framebuffer->height,
framebuffer->layers));
for (uint32_t i = 0; i < pass->attachment_count; ++i) {
struct anv_render_pass_attachment *att = &pass->attachments[i];
VkImageAspectFlags att_aspects = vk_format_aspects(att->format);
VkImageAspectFlags clear_aspects = 0;
if (att_aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) {
/* color attachment */
if (att->load_op == VK_ATTACHMENT_LOAD_OP_CLEAR) {
clear_aspects |= VK_IMAGE_ASPECT_COLOR_BIT;
}
} else {
/* depthstencil attachment */
if ((att_aspects & VK_IMAGE_ASPECT_DEPTH_BIT) &&
att->load_op == VK_ATTACHMENT_LOAD_OP_CLEAR) {
clear_aspects |= VK_IMAGE_ASPECT_DEPTH_BIT;
}
if ((att_aspects & VK_IMAGE_ASPECT_STENCIL_BIT) &&
att->stencil_load_op == VK_ATTACHMENT_LOAD_OP_CLEAR) {
clear_aspects |= VK_IMAGE_ASPECT_STENCIL_BIT;
}
}
state->attachments[i].current_layout = att->initial_layout;
state->attachments[i].pending_clear_aspects = clear_aspects;
if (clear_aspects)
state->attachments[i].clear_value = begin->pClearValues[i];
struct anv_image_view *iview = framebuffer->attachments[i];
anv_assert(iview->vk_format == att->format);
union isl_color_value clear_color = { .u32 = { 0, } };
if (att_aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) {
anv_assert(iview->n_planes == 1);
assert(att_aspects == VK_IMAGE_ASPECT_COLOR_BIT);
color_attachment_compute_aux_usage(cmd_buffer->device,
state, i, begin->renderArea,
&clear_color);
anv_image_fill_surface_state(cmd_buffer->device,
iview->image,
VK_IMAGE_ASPECT_COLOR_BIT,
&iview->planes[0].isl,
ISL_SURF_USAGE_RENDER_TARGET_BIT,
state->attachments[i].aux_usage,
&clear_color,
0,
&state->attachments[i].color,
NULL);
add_image_view_relocs(cmd_buffer, iview, 0,
state->attachments[i].color);
} else {
/* This field will be initialized after the first subpass
* transition.
*/
state->attachments[i].aux_usage = ISL_AUX_USAGE_NONE;
state->attachments[i].input_aux_usage = ISL_AUX_USAGE_NONE;
}
if (need_input_attachment_state(&pass->attachments[i])) {
anv_image_fill_surface_state(cmd_buffer->device,
iview->image,
VK_IMAGE_ASPECT_COLOR_BIT,
&iview->planes[0].isl,
ISL_SURF_USAGE_TEXTURE_BIT,
state->attachments[i].input_aux_usage,
&clear_color,
0,
&state->attachments[i].input,
NULL);
add_image_view_relocs(cmd_buffer, iview, 0,
state->attachments[i].input);
}
}
}
return VK_SUCCESS;
}
VkResult
genX(BeginCommandBuffer)(
VkCommandBuffer commandBuffer,
const VkCommandBufferBeginInfo* pBeginInfo)
{
ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
/* If this is the first vkBeginCommandBuffer, we must *initialize* the
* command buffer's state. Otherwise, we must *reset* its state. In both
* cases we reset it.
*
* From the Vulkan 1.0 spec:
*
* If a command buffer is in the executable state and the command buffer
* was allocated from a command pool with the
* VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT flag set, then
* vkBeginCommandBuffer implicitly resets the command buffer, behaving
* as if vkResetCommandBuffer had been called with
* VK_COMMAND_BUFFER_RESET_RELEASE_RESOURCES_BIT not set. It then puts
* the command buffer in the recording state.
*/
anv_cmd_buffer_reset(cmd_buffer);
cmd_buffer->usage_flags = pBeginInfo->flags;
assert(cmd_buffer->level == VK_COMMAND_BUFFER_LEVEL_SECONDARY ||
!(cmd_buffer->usage_flags & VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT));
genX(cmd_buffer_emit_state_base_address)(cmd_buffer);
/* We sometimes store vertex data in the dynamic state buffer for blorp
* operations and our dynamic state stream may re-use data from previous
* command buffers. In order to prevent stale cache data, we flush the VF
* cache. We could do this on every blorp call but that's not really
* needed as all of the data will get written by the CPU prior to the GPU
* executing anything. The chances are fairly high that they will use
* blorp at least once per primary command buffer so it shouldn't be
* wasted.
*/
if (cmd_buffer->level == VK_COMMAND_BUFFER_LEVEL_PRIMARY)
cmd_buffer->state.pending_pipe_bits |= ANV_PIPE_VF_CACHE_INVALIDATE_BIT;
/* We send an "Indirect State Pointers Disable" packet at
* EndCommandBuffer, so all push contant packets are ignored during a
* context restore. Documentation says after that command, we need to
* emit push constants again before any rendering operation. So we
* flag them dirty here to make sure they get emitted.
*/
if (GEN_GEN == 10)
cmd_buffer->state.push_constants_dirty |= VK_SHADER_STAGE_ALL_GRAPHICS;
VkResult result = VK_SUCCESS;
if (cmd_buffer->usage_flags &
VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT) {
assert(pBeginInfo->pInheritanceInfo);
cmd_buffer->state.pass =
anv_render_pass_from_handle(pBeginInfo->pInheritanceInfo->renderPass);
cmd_buffer->state.subpass =
&cmd_buffer->state.pass->subpasses[pBeginInfo->pInheritanceInfo->subpass];
/* This is optional in the inheritance info. */
cmd_buffer->state.framebuffer =
anv_framebuffer_from_handle(pBeginInfo->pInheritanceInfo->framebuffer);
result = genX(cmd_buffer_setup_attachments)(cmd_buffer,
cmd_buffer->state.pass, NULL);
/* Record that HiZ is enabled if we can. */
if (cmd_buffer->state.framebuffer) {
const struct anv_image_view * const iview =
anv_cmd_buffer_get_depth_stencil_view(cmd_buffer);
if (iview) {
VkImageLayout layout =
cmd_buffer->state.subpass->depth_stencil_attachment.layout;
enum isl_aux_usage aux_usage =
anv_layout_to_aux_usage(&cmd_buffer->device->info, iview->image,
VK_IMAGE_ASPECT_DEPTH_BIT, layout);
cmd_buffer->state.hiz_enabled = aux_usage == ISL_AUX_USAGE_HIZ;
}
}
cmd_buffer->state.gfx.dirty |= ANV_CMD_DIRTY_RENDER_TARGETS;
}
return result;
}
/* From the PRM, Volume 2a:
*
* "Indirect State Pointers Disable
*
* At the completion of the post-sync operation associated with this pipe
* control packet, the indirect state pointers in the hardware are
* considered invalid; the indirect pointers are not saved in the context.
* If any new indirect state commands are executed in the command stream
* while the pipe control is pending, the new indirect state commands are
* preserved.
*
* [DevIVB+]: Using Invalidate State Pointer (ISP) only inhibits context
* restoring of Push Constant (3DSTATE_CONSTANT_*) commands. Push Constant
* commands are only considered as Indirect State Pointers. Once ISP is
* issued in a context, SW must initialize by programming push constant
* commands for all the shaders (at least to zero length) before attempting
* any rendering operation for the same context."
*
* 3DSTATE_CONSTANT_* packets are restored during a context restore,
* even though they point to a BO that has been already unreferenced at
* the end of the previous batch buffer. This has been fine so far since
* we are protected by these scratch page (every address not covered by
* a BO should be pointing to the scratch page). But on CNL, it is
* causing a GPU hang during context restore at the 3DSTATE_CONSTANT_*
* instruction.
*
* The flag "Indirect State Pointers Disable" in PIPE_CONTROL tells the
* hardware to ignore previous 3DSTATE_CONSTANT_* packets during a
* context restore, so the mentioned hang doesn't happen. However,
* software must program push constant commands for all stages prior to
* rendering anything. So we flag them dirty in BeginCommandBuffer.
*/
static void
emit_isp_disable(struct anv_cmd_buffer *cmd_buffer)
{
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
pc.IndirectStatePointersDisable = true;
pc.CommandStreamerStallEnable = true;
}
}
VkResult
genX(EndCommandBuffer)(
VkCommandBuffer commandBuffer)
{
ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
if (anv_batch_has_error(&cmd_buffer->batch))
return cmd_buffer->batch.status;
/* We want every command buffer to start with the PMA fix in a known state,
* so we disable it at the end of the command buffer.
*/
genX(cmd_buffer_enable_pma_fix)(cmd_buffer, false);
genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer);
if (GEN_GEN == 10)
emit_isp_disable(cmd_buffer);
anv_cmd_buffer_end_batch_buffer(cmd_buffer);
return VK_SUCCESS;
}
void
genX(CmdExecuteCommands)(
VkCommandBuffer commandBuffer,
uint32_t commandBufferCount,
const VkCommandBuffer* pCmdBuffers)
{
ANV_FROM_HANDLE(anv_cmd_buffer, primary, commandBuffer);
assert(primary->level == VK_COMMAND_BUFFER_LEVEL_PRIMARY);
if (anv_batch_has_error(&primary->batch))
return;
/* The secondary command buffers will assume that the PMA fix is disabled
* when they begin executing. Make sure this is true.
*/
genX(cmd_buffer_enable_pma_fix)(primary, false);
/* The secondary command buffer doesn't know which textures etc. have been
* flushed prior to their execution. Apply those flushes now.
*/
genX(cmd_buffer_apply_pipe_flushes)(primary);
for (uint32_t i = 0; i < commandBufferCount; i++) {
ANV_FROM_HANDLE(anv_cmd_buffer, secondary, pCmdBuffers[i]);
assert(secondary->level == VK_COMMAND_BUFFER_LEVEL_SECONDARY);
assert(!anv_batch_has_error(&secondary->batch));
if (secondary->usage_flags &
VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT) {
/* If we're continuing a render pass from the primary, we need to
* copy the surface states for the current subpass into the storage
* we allocated for them in BeginCommandBuffer.
*/
struct anv_bo *ss_bo =
&primary->device->surface_state_pool.block_pool.bo;
struct anv_state src_state = primary->state.render_pass_states;
struct anv_state dst_state = secondary->state.render_pass_states;
assert(src_state.alloc_size == dst_state.alloc_size);
genX(cmd_buffer_so_memcpy)(primary, ss_bo, dst_state.offset,
ss_bo, src_state.offset,
src_state.alloc_size);
}
anv_cmd_buffer_add_secondary(primary, secondary);
}
/* The secondary may have selected a different pipeline (3D or compute) and
* may have changed the current L3$ configuration. Reset our tracking
* variables to invalid values to ensure that we re-emit these in the case
* where we do any draws or compute dispatches from the primary after the
* secondary has returned.
*/
primary->state.current_pipeline = UINT32_MAX;
primary->state.current_l3_config = NULL;
/* Each of the secondary command buffers will use its own state base
* address. We need to re-emit state base address for the primary after
* all of the secondaries are done.
*
* TODO: Maybe we want to make this a dirty bit to avoid extra state base
* address calls?
*/
genX(cmd_buffer_emit_state_base_address)(primary);
}
#define IVB_L3SQCREG1_SQGHPCI_DEFAULT 0x00730000
#define VLV_L3SQCREG1_SQGHPCI_DEFAULT 0x00d30000
#define HSW_L3SQCREG1_SQGHPCI_DEFAULT 0x00610000
/**
* Program the hardware to use the specified L3 configuration.
*/
void
genX(cmd_buffer_config_l3)(struct anv_cmd_buffer *cmd_buffer,
const struct gen_l3_config *cfg)
{
assert(cfg);
if (cfg == cmd_buffer->state.current_l3_config)
return;
if (unlikely(INTEL_DEBUG & DEBUG_L3)) {
intel_logd("L3 config transition: ");
gen_dump_l3_config(cfg, stderr);
}
const bool has_slm = cfg->n[GEN_L3P_SLM];
/* According to the hardware docs, the L3 partitioning can only be changed
* while the pipeline is completely drained and the caches are flushed,
* which involves a first PIPE_CONTROL flush which stalls the pipeline...
*/
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
pc.DCFlushEnable = true;
pc.PostSyncOperation = NoWrite;
pc.CommandStreamerStallEnable = true;
}
/* ...followed by a second pipelined PIPE_CONTROL that initiates
* invalidation of the relevant caches. Note that because RO invalidation
* happens at the top of the pipeline (i.e. right away as the PIPE_CONTROL
* command is processed by the CS) we cannot combine it with the previous
* stalling flush as the hardware documentation suggests, because that
* would cause the CS to stall on previous rendering *after* RO
* invalidation and wouldn't prevent the RO caches from being polluted by
* concurrent rendering before the stall completes. This intentionally
* doesn't implement the SKL+ hardware workaround suggesting to enable CS
* stall on PIPE_CONTROLs with the texture cache invalidation bit set for
* GPGPU workloads because the previous and subsequent PIPE_CONTROLs
* already guarantee that there is no concurrent GPGPU kernel execution
* (see SKL HSD 2132585).
*/
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
pc.TextureCacheInvalidationEnable = true;
pc.ConstantCacheInvalidationEnable = true;
pc.InstructionCacheInvalidateEnable = true;
pc.StateCacheInvalidationEnable = true;
pc.PostSyncOperation = NoWrite;
}
/* Now send a third stalling flush to make sure that invalidation is
* complete when the L3 configuration registers are modified.
*/
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
pc.DCFlushEnable = true;
pc.PostSyncOperation = NoWrite;
pc.CommandStreamerStallEnable = true;
}
#if GEN_GEN >= 8
assert(!cfg->n[GEN_L3P_IS] && !cfg->n[GEN_L3P_C] && !cfg->n[GEN_L3P_T]);
uint32_t l3cr;
anv_pack_struct(&l3cr, GENX(L3CNTLREG),
.SLMEnable = has_slm,
.URBAllocation = cfg->n[GEN_L3P_URB],
.ROAllocation = cfg->n[GEN_L3P_RO],
.DCAllocation = cfg->n[GEN_L3P_DC],
.AllAllocation = cfg->n[GEN_L3P_ALL]);
/* Set up the L3 partitioning. */
emit_lri(&cmd_buffer->batch, GENX(L3CNTLREG_num), l3cr);
#else
const bool has_dc = cfg->n[GEN_L3P_DC] || cfg->n[GEN_L3P_ALL];
const bool has_is = cfg->n[GEN_L3P_IS] || cfg->n[GEN_L3P_RO] ||
cfg->n[GEN_L3P_ALL];
const bool has_c = cfg->n[GEN_L3P_C] || cfg->n[GEN_L3P_RO] ||
cfg->n[GEN_L3P_ALL];
const bool has_t = cfg->n[GEN_L3P_T] || cfg->n[GEN_L3P_RO] ||
cfg->n[GEN_L3P_ALL];
assert(!cfg->n[GEN_L3P_ALL]);
/* When enabled SLM only uses a portion of the L3 on half of the banks,
* the matching space on the remaining banks has to be allocated to a
* client (URB for all validated configurations) set to the
* lower-bandwidth 2-bank address hashing mode.
*/
const struct gen_device_info *devinfo = &cmd_buffer->device->info;
const bool urb_low_bw = has_slm && !devinfo->is_baytrail;
assert(!urb_low_bw || cfg->n[GEN_L3P_URB] == cfg->n[GEN_L3P_SLM]);
/* Minimum number of ways that can be allocated to the URB. */
MAYBE_UNUSED const unsigned n0_urb = devinfo->is_baytrail ? 32 : 0;
assert(cfg->n[GEN_L3P_URB] >= n0_urb);
uint32_t l3sqcr1, l3cr2, l3cr3;
anv_pack_struct(&l3sqcr1, GENX(L3SQCREG1),
.ConvertDC_UC = !has_dc,
.ConvertIS_UC = !has_is,
.ConvertC_UC = !has_c,
.ConvertT_UC = !has_t);
l3sqcr1 |=
GEN_IS_HASWELL ? HSW_L3SQCREG1_SQGHPCI_DEFAULT :
devinfo->is_baytrail ? VLV_L3SQCREG1_SQGHPCI_DEFAULT :
IVB_L3SQCREG1_SQGHPCI_DEFAULT;
anv_pack_struct(&l3cr2, GENX(L3CNTLREG2),
.SLMEnable = has_slm,
.URBLowBandwidth = urb_low_bw,
.URBAllocation = cfg->n[GEN_L3P_URB] - n0_urb,
#if !GEN_IS_HASWELL
.ALLAllocation = cfg->n[GEN_L3P_ALL],
#endif
.ROAllocation = cfg->n[GEN_L3P_RO],
.DCAllocation = cfg->n[GEN_L3P_DC]);
anv_pack_struct(&l3cr3, GENX(L3CNTLREG3),
.ISAllocation = cfg->n[GEN_L3P_IS],
.ISLowBandwidth = 0,
.CAllocation = cfg->n[GEN_L3P_C],
.CLowBandwidth = 0,
.TAllocation = cfg->n[GEN_L3P_T],
.TLowBandwidth = 0);
/* Set up the L3 partitioning. */
emit_lri(&cmd_buffer->batch, GENX(L3SQCREG1_num), l3sqcr1);
emit_lri(&cmd_buffer->batch, GENX(L3CNTLREG2_num), l3cr2);
emit_lri(&cmd_buffer->batch, GENX(L3CNTLREG3_num), l3cr3);
#if GEN_IS_HASWELL
if (cmd_buffer->device->instance->physicalDevice.cmd_parser_version >= 4) {
/* Enable L3 atomics on HSW if we have a DC partition, otherwise keep
* them disabled to avoid crashing the system hard.
*/
uint32_t scratch1, chicken3;
anv_pack_struct(&scratch1, GENX(SCRATCH1),
.L3AtomicDisable = !has_dc);
anv_pack_struct(&chicken3, GENX(CHICKEN3),
.L3AtomicDisableMask = true,
.L3AtomicDisable = !has_dc);
emit_lri(&cmd_buffer->batch, GENX(SCRATCH1_num), scratch1);
emit_lri(&cmd_buffer->batch, GENX(CHICKEN3_num), chicken3);
}
#endif
#endif
cmd_buffer->state.current_l3_config = cfg;
}
void
genX(cmd_buffer_apply_pipe_flushes)(struct anv_cmd_buffer *cmd_buffer)
{
enum anv_pipe_bits bits = cmd_buffer->state.pending_pipe_bits;
/* Flushes are pipelined while invalidations are handled immediately.
* Therefore, if we're flushing anything then we need to schedule a stall
* before any invalidations can happen.
*/
if (bits & ANV_PIPE_FLUSH_BITS)
bits |= ANV_PIPE_NEEDS_CS_STALL_BIT;
/* If we're going to do an invalidate and we have a pending CS stall that
* has yet to be resolved, we do the CS stall now.
*/
if ((bits & ANV_PIPE_INVALIDATE_BITS) &&
(bits & ANV_PIPE_NEEDS_CS_STALL_BIT)) {
bits |= ANV_PIPE_CS_STALL_BIT;
bits &= ~ANV_PIPE_NEEDS_CS_STALL_BIT;
}
if (bits & (ANV_PIPE_FLUSH_BITS | ANV_PIPE_CS_STALL_BIT)) {
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) {
pipe.DepthCacheFlushEnable = bits & ANV_PIPE_DEPTH_CACHE_FLUSH_BIT;
pipe.DCFlushEnable = bits & ANV_PIPE_DATA_CACHE_FLUSH_BIT;
pipe.RenderTargetCacheFlushEnable =
bits & ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT;
pipe.DepthStallEnable = bits & ANV_PIPE_DEPTH_STALL_BIT;
pipe.CommandStreamerStallEnable = bits & ANV_PIPE_CS_STALL_BIT;
pipe.StallAtPixelScoreboard = bits & ANV_PIPE_STALL_AT_SCOREBOARD_BIT;
/*
* According to the Broadwell documentation, any PIPE_CONTROL with the
* "Command Streamer Stall" bit set must also have another bit set,
* with five different options:
*
* - Render Target Cache Flush
* - Depth Cache Flush
* - Stall at Pixel Scoreboard
* - Post-Sync Operation
* - Depth Stall
* - DC Flush Enable
*
* I chose "Stall at Pixel Scoreboard" since that's what we use in
* mesa and it seems to work fine. The choice is fairly arbitrary.
*/
if ((bits & ANV_PIPE_CS_STALL_BIT) &&
!(bits & (ANV_PIPE_FLUSH_BITS | ANV_PIPE_DEPTH_STALL_BIT |
ANV_PIPE_STALL_AT_SCOREBOARD_BIT)))
pipe.StallAtPixelScoreboard = true;
}
bits &= ~(ANV_PIPE_FLUSH_BITS | ANV_PIPE_CS_STALL_BIT);
}
if (bits & ANV_PIPE_INVALIDATE_BITS) {
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) {
pipe.StateCacheInvalidationEnable =
bits & ANV_PIPE_STATE_CACHE_INVALIDATE_BIT;
pipe.ConstantCacheInvalidationEnable =
bits & ANV_PIPE_CONSTANT_CACHE_INVALIDATE_BIT;
pipe.VFCacheInvalidationEnable =
bits & ANV_PIPE_VF_CACHE_INVALIDATE_BIT;
pipe.TextureCacheInvalidationEnable =
bits & ANV_PIPE_TEXTURE_CACHE_INVALIDATE_BIT;
pipe.InstructionCacheInvalidateEnable =
bits & ANV_PIPE_INSTRUCTION_CACHE_INVALIDATE_BIT;
}
bits &= ~ANV_PIPE_INVALIDATE_BITS;
}
cmd_buffer->state.pending_pipe_bits = bits;
}
void genX(CmdPipelineBarrier)(
VkCommandBuffer commandBuffer,
VkPipelineStageFlags srcStageMask,
VkPipelineStageFlags destStageMask,
VkBool32 byRegion,
uint32_t memoryBarrierCount,
const VkMemoryBarrier* pMemoryBarriers,
uint32_t bufferMemoryBarrierCount,
const VkBufferMemoryBarrier* pBufferMemoryBarriers,
uint32_t imageMemoryBarrierCount,
const VkImageMemoryBarrier* pImageMemoryBarriers)
{
ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
/* XXX: Right now, we're really dumb and just flush whatever categories
* the app asks for. One of these days we may make this a bit better
* but right now that's all the hardware allows for in most areas.
*/
VkAccessFlags src_flags = 0;
VkAccessFlags dst_flags = 0;
for (uint32_t i = 0; i < memoryBarrierCount; i++) {
src_flags |= pMemoryBarriers[i].srcAccessMask;
dst_flags |= pMemoryBarriers[i].dstAccessMask;
}
for (uint32_t i = 0; i < bufferMemoryBarrierCount; i++) {
src_flags |= pBufferMemoryBarriers[i].srcAccessMask;
dst_flags |= pBufferMemoryBarriers[i].dstAccessMask;
}
for (uint32_t i = 0; i < imageMemoryBarrierCount; i++) {
src_flags |= pImageMemoryBarriers[i].srcAccessMask;
dst_flags |= pImageMemoryBarriers[i].dstAccessMask;
ANV_FROM_HANDLE(anv_image, image, pImageMemoryBarriers[i].image);
const VkImageSubresourceRange *range =
&pImageMemoryBarriers[i].subresourceRange;
if (range->aspectMask & VK_IMAGE_ASPECT_DEPTH_BIT) {
transition_depth_buffer(cmd_buffer, image,
pImageMemoryBarriers[i].oldLayout,
pImageMemoryBarriers[i].newLayout);
} else if (range->aspectMask & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) {
VkImageAspectFlags color_aspects =
anv_image_expand_aspects(image, range->aspectMask);
uint32_t aspect_bit;
anv_foreach_image_aspect_bit(aspect_bit, image, color_aspects) {
transition_color_buffer(cmd_buffer, image, 1UL << aspect_bit,
range->baseMipLevel,
anv_get_levelCount(image, range),
range->baseArrayLayer,
anv_get_layerCount(image, range),
pImageMemoryBarriers[i].oldLayout,
pImageMemoryBarriers[i].newLayout);
}
}
}
cmd_buffer->state.pending_pipe_bits |=
anv_pipe_flush_bits_for_access_flags(src_flags) |
anv_pipe_invalidate_bits_for_access_flags(dst_flags);
}
static void
cmd_buffer_alloc_push_constants(struct anv_cmd_buffer *cmd_buffer)
{
VkShaderStageFlags stages =
cmd_buffer->state.gfx.base.pipeline->active_stages;
/* In order to avoid thrash, we assume that vertex and fragment stages
* always exist. In the rare case where one is missing *and* the other
* uses push concstants, this may be suboptimal. However, avoiding stalls
* seems more important.
*/
stages |= VK_SHADER_STAGE_FRAGMENT_BIT | VK_SHADER_STAGE_VERTEX_BIT;
if (stages == cmd_buffer->state.push_constant_stages)
return;
#if GEN_GEN >= 8
const unsigned push_constant_kb = 32;
#elif GEN_IS_HASWELL
const unsigned push_constant_kb = cmd_buffer->device->info.gt == 3 ? 32 : 16;
#else
const unsigned push_constant_kb = 16;
#endif
const unsigned num_stages =
_mesa_bitcount(stages & VK_SHADER_STAGE_ALL_GRAPHICS);
unsigned size_per_stage = push_constant_kb / num_stages;
/* Broadwell+ and Haswell gt3 require that the push constant sizes be in
* units of 2KB. Incidentally, these are the same platforms that have
* 32KB worth of push constant space.
*/
if (push_constant_kb == 32)
size_per_stage &= ~1u;
uint32_t kb_used = 0;
for (int i = MESA_SHADER_VERTEX; i < MESA_SHADER_FRAGMENT; i++) {
unsigned push_size = (stages & (1 << i)) ? size_per_stage : 0;
anv_batch_emit(&cmd_buffer->batch,
GENX(3DSTATE_PUSH_CONSTANT_ALLOC_VS), alloc) {
alloc._3DCommandSubOpcode = 18 + i;
alloc.ConstantBufferOffset = (push_size > 0) ? kb_used : 0;
alloc.ConstantBufferSize = push_size;
}
kb_used += push_size;
}
anv_batch_emit(&cmd_buffer->batch,
GENX(3DSTATE_PUSH_CONSTANT_ALLOC_PS), alloc) {
alloc.ConstantBufferOffset = kb_used;
alloc.ConstantBufferSize = push_constant_kb - kb_used;
}
cmd_buffer->state.push_constant_stages = stages;
/* From the BDW PRM for 3DSTATE_PUSH_CONSTANT_ALLOC_VS:
*
* "The 3DSTATE_CONSTANT_VS must be reprogrammed prior to
* the next 3DPRIMITIVE command after programming the
* 3DSTATE_PUSH_CONSTANT_ALLOC_VS"
*
* Since 3DSTATE_PUSH_CONSTANT_ALLOC_VS is programmed as part of
* pipeline setup, we need to dirty push constants.
*/
cmd_buffer->state.push_constants_dirty |= VK_SHADER_STAGE_ALL_GRAPHICS;
}
static const struct anv_descriptor *
anv_descriptor_for_binding(const struct anv_cmd_pipeline_state *pipe_state,
const struct anv_pipeline_binding *binding)
{
assert(binding->set < MAX_SETS);
const struct anv_descriptor_set *set =
pipe_state->descriptors[binding->set];
const uint32_t offset =
set->layout->binding[binding->binding].descriptor_index;
return &set->descriptors[offset + binding->index];
}
static uint32_t
dynamic_offset_for_binding(const struct anv_cmd_pipeline_state *pipe_state,
const struct anv_pipeline *pipeline,
const struct anv_pipeline_binding *binding)
{
assert(binding->set < MAX_SETS);
const struct anv_descriptor_set *set =
pipe_state->descriptors[binding->set];
uint32_t dynamic_offset_idx =
pipeline->layout->set[binding->set].dynamic_offset_start +
set->layout->binding[binding->binding].dynamic_offset_index +
binding->index;
return pipe_state->dynamic_offsets[dynamic_offset_idx];
}
static VkResult
emit_binding_table(struct anv_cmd_buffer *cmd_buffer,
gl_shader_stage stage,
struct anv_state *bt_state)
{
struct anv_subpass *subpass = cmd_buffer->state.subpass;
struct anv_cmd_pipeline_state *pipe_state;
struct anv_pipeline *pipeline;
uint32_t bias, state_offset;
switch (stage) {
case MESA_SHADER_COMPUTE:
pipe_state = &cmd_buffer->state.compute.base;
bias = 1;
break;
default:
pipe_state = &cmd_buffer->state.gfx.base;
bias = 0;
break;
}
pipeline = pipe_state->pipeline;
if (!anv_pipeline_has_stage(pipeline, stage)) {
*bt_state = (struct anv_state) { 0, };
return VK_SUCCESS;
}
struct anv_pipeline_bind_map *map = &pipeline->shaders[stage]->bind_map;
if (bias + map->surface_count == 0) {
*bt_state = (struct anv_state) { 0, };
return VK_SUCCESS;
}
*bt_state = anv_cmd_buffer_alloc_binding_table(cmd_buffer,
bias + map->surface_count,
&state_offset);
uint32_t *bt_map = bt_state->map;
if (bt_state->map == NULL)
return VK_ERROR_OUT_OF_DEVICE_MEMORY;
if (stage == MESA_SHADER_COMPUTE &&
get_cs_prog_data(pipeline)->uses_num_work_groups) {
struct anv_bo *bo = cmd_buffer->state.compute.num_workgroups.bo;
uint32_t bo_offset = cmd_buffer->state.compute.num_workgroups.offset;
struct anv_state surface_state;
surface_state =
anv_cmd_buffer_alloc_surface_state(cmd_buffer);
const enum isl_format format =
anv_isl_format_for_descriptor_type(VK_DESCRIPTOR_TYPE_STORAGE_BUFFER);
anv_fill_buffer_surface_state(cmd_buffer->device, surface_state,
format, bo_offset, 12, 1);
bt_map[0] = surface_state.offset + state_offset;
add_surface_state_reloc(cmd_buffer, surface_state, bo, bo_offset);
}
if (map->surface_count == 0)
goto out;
if (map->image_count > 0) {
VkResult result =
anv_cmd_buffer_ensure_push_constant_field(cmd_buffer, stage, images);
if (result != VK_SUCCESS)
return result;
cmd_buffer->state.push_constants_dirty |= 1 << stage;
}
uint32_t image = 0;
for (uint32_t s = 0; s < map->surface_count; s++) {
struct anv_pipeline_binding *binding = &map->surface_to_descriptor[s];
struct anv_state surface_state;
if (binding->set == ANV_DESCRIPTOR_SET_COLOR_ATTACHMENTS) {
/* Color attachment binding */
assert(stage == MESA_SHADER_FRAGMENT);
assert(binding->binding == 0);
if (binding->index < subpass->color_count) {
const unsigned att =
subpass->color_attachments[binding->index].attachment;
/* From the Vulkan 1.0.46 spec:
*
* "If any color or depth/stencil attachments are
* VK_ATTACHMENT_UNUSED, then no writes occur for those
* attachments."
*/
if (att == VK_ATTACHMENT_UNUSED) {
surface_state = cmd_buffer->state.null_surface_state;
} else {
surface_state = cmd_buffer->state.attachments[att].color.state;
}
} else {
surface_state = cmd_buffer->state.null_surface_state;
}
bt_map[bias + s] = surface_state.offset + state_offset;
continue;
}
const struct anv_descriptor *desc =
anv_descriptor_for_binding(pipe_state, binding);
switch (desc->type) {
case VK_DESCRIPTOR_TYPE_SAMPLER:
/* Nothing for us to do here */
continue;
case VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER:
case VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE: {
struct anv_surface_state sstate =
(desc->layout == VK_IMAGE_LAYOUT_GENERAL) ?
desc->image_view->planes[binding->plane].general_sampler_surface_state :
desc->image_view->planes[binding->plane].optimal_sampler_surface_state;
surface_state = sstate.state;
assert(surface_state.alloc_size);
add_image_view_relocs(cmd_buffer, desc->image_view,
binding->plane, sstate);
break;
}
case VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT:
assert(stage == MESA_SHADER_FRAGMENT);
if ((desc->image_view->aspect_mask & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) == 0) {
/* For depth and stencil input attachments, we treat it like any
* old texture that a user may have bound.
*/
struct anv_surface_state sstate =
(desc->layout == VK_IMAGE_LAYOUT_GENERAL) ?
desc->image_view->planes[binding->plane].general_sampler_surface_state :
desc->image_view->planes[binding->plane].optimal_sampler_surface_state;
surface_state = sstate.state;
assert(surface_state.alloc_size);
add_image_view_relocs(cmd_buffer, desc->image_view,
binding->plane, sstate);
} else {
/* For color input attachments, we create the surface state at
* vkBeginRenderPass time so that we can include aux and clear
* color information.
*/
assert(binding->input_attachment_index < subpass->input_count);
const unsigned subpass_att = binding->input_attachment_index;
const unsigned att = subpass->input_attachments[subpass_att].attachment;
surface_state = cmd_buffer->state.attachments[att].input.state;
}
break;
case VK_DESCRIPTOR_TYPE_STORAGE_IMAGE: {
struct anv_surface_state sstate = (binding->write_only)
? desc->image_view->planes[binding->plane].writeonly_storage_surface_state
: desc->image_view->planes[binding->plane].storage_surface_state;
surface_state = sstate.state;
assert(surface_state.alloc_size);
add_image_view_relocs(cmd_buffer, desc->image_view,
binding->plane, sstate);
struct brw_image_param *image_param =
&cmd_buffer->state.push_constants[stage]->images[image++];
*image_param = desc->image_view->planes[binding->plane].storage_image_param;
image_param->surface_idx = bias + s;
break;
}
case VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER:
case VK_DESCRIPTOR_TYPE_STORAGE_BUFFER:
case VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER:
surface_state = desc->buffer_view->surface_state;
assert(surface_state.alloc_size);
add_surface_state_reloc(cmd_buffer, surface_state,
desc->buffer_view->bo,
desc->buffer_view->offset);
break;
case VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC:
case VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC: {
/* Compute the offset within the buffer */
uint32_t dynamic_offset =
dynamic_offset_for_binding(pipe_state, pipeline, binding);
uint64_t offset = desc->offset + dynamic_offset;
/* Clamp to the buffer size */
offset = MIN2(offset, desc->buffer->size);
/* Clamp the range to the buffer size */
uint32_t range = MIN2(desc->range, desc->buffer->size - offset);
surface_state =
anv_state_stream_alloc(&cmd_buffer->surface_state_stream, 64, 64);
enum isl_format format =
anv_isl_format_for_descriptor_type(desc->type);
anv_fill_buffer_surface_state(cmd_buffer->device, surface_state,
format, offset, range, 1);
add_surface_state_reloc(cmd_buffer, surface_state,
desc->buffer->bo,
desc->buffer->offset + offset);
break;
}
case VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER:
surface_state = (binding->write_only)
? desc->buffer_view->writeonly_storage_surface_state
: desc->buffer_view->storage_surface_state;
assert(surface_state.alloc_size);
add_surface_state_reloc(cmd_buffer, surface_state,
desc->buffer_view->bo,
desc->buffer_view->offset);
struct brw_image_param *image_param =
&cmd_buffer->state.push_constants[stage]->images[image++];
*image_param = desc->buffer_view->storage_image_param;
image_param->surface_idx = bias + s;
break;
default:
assert(!"Invalid descriptor type");
continue;
}
bt_map[bias + s] = surface_state.offset + state_offset;
}
assert(image == map->image_count);
out:
anv_state_flush(cmd_buffer->device, *bt_state);
return VK_SUCCESS;
}
static VkResult
emit_samplers(struct anv_cmd_buffer *cmd_buffer,
gl_shader_stage stage,
struct anv_state *state)
{
struct anv_cmd_pipeline_state *pipe_state =
stage == MESA_SHADER_COMPUTE ? &cmd_buffer->state.compute.base :
&cmd_buffer->state.gfx.base;
struct anv_pipeline *pipeline = pipe_state->pipeline;
if (!anv_pipeline_has_stage(pipeline, stage)) {
*state = (struct anv_state) { 0, };
return VK_SUCCESS;
}
struct anv_pipeline_bind_map *map = &pipeline->shaders[stage]->bind_map;
if (map->sampler_count == 0) {
*state = (struct anv_state) { 0, };
return VK_SUCCESS;
}
uint32_t size = map->sampler_count * 16;
*state = anv_cmd_buffer_alloc_dynamic_state(cmd_buffer, size, 32);
if (state->map == NULL)
return VK_ERROR_OUT_OF_DEVICE_MEMORY;
for (uint32_t s = 0; s < map->sampler_count; s++) {
struct anv_pipeline_binding *binding = &map->sampler_to_descriptor[s];
const struct anv_descriptor *desc =
anv_descriptor_for_binding(pipe_state, binding);
if (desc->type != VK_DESCRIPTOR_TYPE_SAMPLER &&
desc->type != VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER)
continue;
struct anv_sampler *sampler = desc->sampler;
/* This can happen if we have an unfilled slot since TYPE_SAMPLER
* happens to be zero.
*/
if (sampler == NULL)
continue;
memcpy(state->map + (s * 16),
sampler->state[binding->plane], sizeof(sampler->state[0]));
}
anv_state_flush(cmd_buffer->device, *state);
return VK_SUCCESS;
}
static uint32_t
flush_descriptor_sets(struct anv_cmd_buffer *cmd_buffer)
{
struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline;
VkShaderStageFlags dirty = cmd_buffer->state.descriptors_dirty &
pipeline->active_stages;
VkResult result = VK_SUCCESS;
anv_foreach_stage(s, dirty) {
result = emit_samplers(cmd_buffer, s, &cmd_buffer->state.samplers[s]);
if (result != VK_SUCCESS)
break;
result = emit_binding_table(cmd_buffer, s,
&cmd_buffer->state.binding_tables[s]);
if (result != VK_SUCCESS)
break;
}
if (result != VK_SUCCESS) {
assert(result == VK_ERROR_OUT_OF_DEVICE_MEMORY);
result = anv_cmd_buffer_new_binding_table_block(cmd_buffer);
if (result != VK_SUCCESS)
return 0;
/* Re-emit state base addresses so we get the new surface state base
* address before we start emitting binding tables etc.
*/
genX(cmd_buffer_emit_state_base_address)(cmd_buffer);
/* Re-emit all active binding tables */
dirty |= pipeline->active_stages;
anv_foreach_stage(s, dirty) {
result = emit_samplers(cmd_buffer, s, &cmd_buffer->state.samplers[s]);
if (result != VK_SUCCESS) {
anv_batch_set_error(&cmd_buffer->batch, result);
return 0;
}
result = emit_binding_table(cmd_buffer, s,
&cmd_buffer->state.binding_tables[s]);
if (result != VK_SUCCESS) {
anv_batch_set_error(&cmd_buffer->batch, result);
return 0;
}
}
}
cmd_buffer->state.descriptors_dirty &= ~dirty;
return dirty;
}
static void
cmd_buffer_emit_descriptor_pointers(struct anv_cmd_buffer *cmd_buffer,
uint32_t stages)
{
static const uint32_t sampler_state_opcodes[] = {
[MESA_SHADER_VERTEX] = 43,
[MESA_SHADER_TESS_CTRL] = 44, /* HS */
[MESA_SHADER_TESS_EVAL] = 45, /* DS */
[MESA_SHADER_GEOMETRY] = 46,
[MESA_SHADER_FRAGMENT] = 47,
[MESA_SHADER_COMPUTE] = 0,
};
static const uint32_t binding_table_opcodes[] = {
[MESA_SHADER_VERTEX] = 38,
[MESA_SHADER_TESS_CTRL] = 39,
[MESA_SHADER_TESS_EVAL] = 40,
[MESA_SHADER_GEOMETRY] = 41,
[MESA_SHADER_FRAGMENT] = 42,
[MESA_SHADER_COMPUTE] = 0,
};
anv_foreach_stage(s, stages) {
assert(s < ARRAY_SIZE(binding_table_opcodes));
assert(binding_table_opcodes[s] > 0);
if (cmd_buffer->state.samplers[s].alloc_size > 0) {
anv_batch_emit(&cmd_buffer->batch,
GENX(3DSTATE_SAMPLER_STATE_POINTERS_VS), ssp) {
ssp._3DCommandSubOpcode = sampler_state_opcodes[s];
ssp.PointertoVSSamplerState = cmd_buffer->state.samplers[s].offset;
}
}
/* Always emit binding table pointers if we're asked to, since on SKL
* this is what flushes push constants. */
anv_batch_emit(&cmd_buffer->batch,
GENX(3DSTATE_BINDING_TABLE_POINTERS_VS), btp) {
btp._3DCommandSubOpcode = binding_table_opcodes[s];
btp.PointertoVSBindingTable = cmd_buffer->state.binding_tables[s].offset;
}
}
}
static void
cmd_buffer_flush_push_constants(struct anv_cmd_buffer *cmd_buffer,
VkShaderStageFlags dirty_stages)
{
const struct anv_cmd_graphics_state *gfx_state = &cmd_buffer->state.gfx;
const struct anv_pipeline *pipeline = gfx_state->base.pipeline;
static const uint32_t push_constant_opcodes[] = {
[MESA_SHADER_VERTEX] = 21,
[MESA_SHADER_TESS_CTRL] = 25, /* HS */
[MESA_SHADER_TESS_EVAL] = 26, /* DS */
[MESA_SHADER_GEOMETRY] = 22,
[MESA_SHADER_FRAGMENT] = 23,
[MESA_SHADER_COMPUTE] = 0,
};
VkShaderStageFlags flushed = 0;
anv_foreach_stage(stage, dirty_stages) {
assert(stage < ARRAY_SIZE(push_constant_opcodes));
assert(push_constant_opcodes[stage] > 0);
anv_batch_emit(&cmd_buffer->batch, GENX(3DSTATE_CONSTANT_VS), c) {
c._3DCommandSubOpcode = push_constant_opcodes[stage];
if (anv_pipeline_has_stage(pipeline, stage)) {
#if GEN_GEN >= 8 || GEN_IS_HASWELL
const struct brw_stage_prog_data *prog_data =
pipeline->shaders[stage]->prog_data;
const struct anv_pipeline_bind_map *bind_map =
&pipeline->shaders[stage]->bind_map;
/* The Skylake PRM contains the following restriction:
*
* "The driver must ensure The following case does not occur
* without a flush to the 3D engine: 3DSTATE_CONSTANT_* with
* buffer 3 read length equal to zero committed followed by a
* 3DSTATE_CONSTANT_* with buffer 0 read length not equal to
* zero committed."
*
* To avoid this, we program the buffers in the highest slots.
* This way, slot 0 is only used if slot 3 is also used.
*/
int n = 3;
for (int i = 3; i >= 0; i--) {
const struct brw_ubo_range *range = &prog_data->ubo_ranges[i];
if (range->length == 0)
continue;
const unsigned surface =
prog_data->binding_table.ubo_start + range->block;
assert(surface <= bind_map->surface_count);
const struct anv_pipeline_binding *binding =
&bind_map->surface_to_descriptor[surface];
const struct anv_descriptor *desc =
anv_descriptor_for_binding(&gfx_state->base, binding);
struct anv_address read_addr;
uint32_t read_len;
if (desc->type == VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER) {
read_len = MIN2(range->length,
DIV_ROUND_UP(desc->buffer_view->range, 32) - range->start);
read_addr = (struct anv_address) {
.bo = desc->buffer_view->bo,
.offset = desc->buffer_view->offset +
range->start * 32,
};
} else {
assert(desc->type == VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC);
uint32_t dynamic_offset =
dynamic_offset_for_binding(&gfx_state->base,
pipeline, binding);
uint32_t buf_offset =
MIN2(desc->offset + dynamic_offset, desc->buffer->size);
uint32_t buf_range =
MIN2(desc->range, desc->buffer->size - buf_offset);
read_len = MIN2(range->length,
DIV_ROUND_UP(buf_range, 32) - range->start);
read_addr = (struct anv_address) {
.bo = desc->buffer->bo,
.offset = desc->buffer->offset + buf_offset +
range->start * 32,
};
}
if (read_len > 0) {
c.ConstantBody.Buffer[n] = read_addr;
c.ConstantBody.ReadLength[n] = read_len;
n--;
}
}
struct anv_state state =
anv_cmd_buffer_push_constants(cmd_buffer, stage);
if (state.alloc_size > 0) {
c.ConstantBody.Buffer[n] = (struct anv_address) {
.bo = &cmd_buffer->device->dynamic_state_pool.block_pool.bo,
.offset = state.offset,
};
c.ConstantBody.ReadLength[n] =
DIV_ROUND_UP(state.alloc_size, 32);
}
#else
/* For Ivy Bridge, the push constants packets have a different
* rule that would require us to iterate in the other direction
* and possibly mess around with dynamic state base address.
* Don't bother; just emit regular push constants at n = 0.
*/
struct anv_state state =
anv_cmd_buffer_push_constants(cmd_buffer, stage);
if (state.alloc_size > 0) {
c.ConstantBody.Buffer[0].offset = state.offset,
c.ConstantBody.ReadLength[0] =
DIV_ROUND_UP(state.alloc_size, 32);
}
#endif
}
}
flushed |= mesa_to_vk_shader_stage(stage);
}
cmd_buffer->state.push_constants_dirty &= ~flushed;
}
void
genX(cmd_buffer_flush_state)(struct anv_cmd_buffer *cmd_buffer)
{
struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline;
uint32_t *p;
uint32_t vb_emit = cmd_buffer->state.gfx.vb_dirty & pipeline->vb_used;
assert((pipeline->active_stages & VK_SHADER_STAGE_COMPUTE_BIT) == 0);
genX(cmd_buffer_config_l3)(cmd_buffer, pipeline->urb.l3_config);
genX(flush_pipeline_select_3d)(cmd_buffer);
if (vb_emit) {
const uint32_t num_buffers = __builtin_popcount(vb_emit);
const uint32_t num_dwords = 1 + num_buffers * 4;
p = anv_batch_emitn(&cmd_buffer->batch, num_dwords,
GENX(3DSTATE_VERTEX_BUFFERS));
uint32_t vb, i = 0;
for_each_bit(vb, vb_emit) {
struct anv_buffer *buffer = cmd_buffer->state.vertex_bindings[vb].buffer;
uint32_t offset = cmd_buffer->state.vertex_bindings[vb].offset;
struct GENX(VERTEX_BUFFER_STATE) state = {
.VertexBufferIndex = vb,
#if GEN_GEN >= 8
.MemoryObjectControlState = GENX(MOCS),
#else
.BufferAccessType = pipeline->instancing_enable[vb] ? INSTANCEDATA : VERTEXDATA,
/* Our implementation of VK_KHR_multiview uses instancing to draw
* the different views. If the client asks for instancing, we
* need to use the Instance Data Step Rate to ensure that we
* repeat the client's per-instance data once for each view.
*/
.InstanceDataStepRate = anv_subpass_view_count(pipeline->subpass),
.VertexBufferMemoryObjectControlState = GENX(MOCS),
#endif
.AddressModifyEnable = true,
.BufferPitch = pipeline->binding_stride[vb],
.BufferStartingAddress = { buffer->bo, buffer->offset + offset },
#if GEN_GEN >= 8
.BufferSize = buffer->size - offset
#else
.EndAddress = { buffer->bo, buffer->offset + buffer->size - 1},
#endif
};
GENX(VERTEX_BUFFER_STATE_pack)(&cmd_buffer->batch, &p[1 + i * 4], &state);
i++;
}
}
cmd_buffer->state.gfx.vb_dirty &= ~vb_emit;
if (cmd_buffer->state.gfx.dirty & ANV_CMD_DIRTY_PIPELINE) {
anv_batch_emit_batch(&cmd_buffer->batch, &pipeline->batch);
/* The exact descriptor layout is pulled from the pipeline, so we need
* to re-emit binding tables on every pipeline change.
*/
cmd_buffer->state.descriptors_dirty |= pipeline->active_stages;
/* If the pipeline changed, we may need to re-allocate push constant
* space in the URB.
*/
cmd_buffer_alloc_push_constants(cmd_buffer);
}
#if GEN_GEN <= 7
if (cmd_buffer->state.descriptors_dirty & VK_SHADER_STAGE_VERTEX_BIT ||
cmd_buffer->state.push_constants_dirty & VK_SHADER_STAGE_VERTEX_BIT) {
/* From the IVB PRM Vol. 2, Part 1, Section 3.2.1:
*
* "A PIPE_CONTROL with Post-Sync Operation set to 1h and a depth
* stall needs to be sent just prior to any 3DSTATE_VS,
* 3DSTATE_URB_VS, 3DSTATE_CONSTANT_VS,
* 3DSTATE_BINDING_TABLE_POINTER_VS,
* 3DSTATE_SAMPLER_STATE_POINTER_VS command. Only one
* PIPE_CONTROL needs to be sent before any combination of VS
* associated 3DSTATE."
*/
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
pc.DepthStallEnable = true;
pc.PostSyncOperation = WriteImmediateData;
pc.Address =
(struct anv_address) { &cmd_buffer->device->workaround_bo, 0 };
}
}
#endif
/* Render targets live in the same binding table as fragment descriptors */
if (cmd_buffer->state.gfx.dirty & ANV_CMD_DIRTY_RENDER_TARGETS)
cmd_buffer->state.descriptors_dirty |= VK_SHADER_STAGE_FRAGMENT_BIT;
/* We emit the binding tables and sampler tables first, then emit push
* constants and then finally emit binding table and sampler table
* pointers. It has to happen in this order, since emitting the binding
* tables may change the push constants (in case of storage images). After
* emitting push constants, on SKL+ we have to emit the corresponding
* 3DSTATE_BINDING_TABLE_POINTER_* for the push constants to take effect.
*/
uint32_t dirty = 0;
if (cmd_buffer->state.descriptors_dirty)
dirty = flush_descriptor_sets(cmd_buffer);
if (dirty || cmd_buffer->state.push_constants_dirty) {
/* Because we're pushing UBOs, we have to push whenever either
* descriptors or push constants is dirty.
*/
dirty |= cmd_buffer->state.push_constants_dirty;
dirty &= ANV_STAGE_MASK & VK_SHADER_STAGE_ALL_GRAPHICS;
cmd_buffer_flush_push_constants(cmd_buffer, dirty);
}
if (dirty)
cmd_buffer_emit_descriptor_pointers(cmd_buffer, dirty);
if (cmd_buffer->state.gfx.dirty & ANV_CMD_DIRTY_DYNAMIC_VIEWPORT)
gen8_cmd_buffer_emit_viewport(cmd_buffer);
if (cmd_buffer->state.gfx.dirty & (ANV_CMD_DIRTY_DYNAMIC_VIEWPORT |
ANV_CMD_DIRTY_PIPELINE)) {
gen8_cmd_buffer_emit_depth_viewport(cmd_buffer,
pipeline->depth_clamp_enable);
}
if (cmd_buffer->state.gfx.dirty & ANV_CMD_DIRTY_DYNAMIC_SCISSOR)
gen7_cmd_buffer_emit_scissor(cmd_buffer);
genX(cmd_buffer_flush_dynamic_state)(cmd_buffer);
genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer);
}
static void
emit_vertex_bo(struct anv_cmd_buffer *cmd_buffer,
struct anv_bo *bo, uint32_t offset,
uint32_t size, uint32_t index)
{
uint32_t *p = anv_batch_emitn(&cmd_buffer->batch, 5,
GENX(3DSTATE_VERTEX_BUFFERS));
GENX(VERTEX_BUFFER_STATE_pack)(&cmd_buffer->batch, p + 1,
&(struct GENX(VERTEX_BUFFER_STATE)) {
.VertexBufferIndex = index,
.AddressModifyEnable = true,
.BufferPitch = 0,
#if (GEN_GEN >= 8)
.MemoryObjectControlState = GENX(MOCS),
.BufferStartingAddress = { bo, offset },
.BufferSize = size
#else
.VertexBufferMemoryObjectControlState = GENX(MOCS),
.BufferStartingAddress = { bo, offset },
.EndAddress = { bo, offset + size },
#endif
});
}
static void
emit_base_vertex_instance_bo(struct anv_cmd_buffer *cmd_buffer,
struct anv_bo *bo, uint32_t offset)
{
emit_vertex_bo(cmd_buffer, bo, offset, 8, ANV_SVGS_VB_INDEX);
}
static void
emit_base_vertex_instance(struct anv_cmd_buffer *cmd_buffer,
uint32_t base_vertex, uint32_t base_instance)
{
struct anv_state id_state =
anv_cmd_buffer_alloc_dynamic_state(cmd_buffer, 8, 4);
((uint32_t *)id_state.map)[0] = base_vertex;
((uint32_t *)id_state.map)[1] = base_instance;
anv_state_flush(cmd_buffer->device, id_state);
emit_base_vertex_instance_bo(cmd_buffer,
&cmd_buffer->device->dynamic_state_pool.block_pool.bo, id_state.offset);
}
static void
emit_draw_index(struct anv_cmd_buffer *cmd_buffer, uint32_t draw_index)
{
struct anv_state state =
anv_cmd_buffer_alloc_dynamic_state(cmd_buffer, 4, 4);
((uint32_t *)state.map)[0] = draw_index;
anv_state_flush(cmd_buffer->device, state);
emit_vertex_bo(cmd_buffer,
&cmd_buffer->device->dynamic_state_pool.block_pool.bo,
state.offset, 4, ANV_DRAWID_VB_INDEX);
}
void genX(CmdDraw)(
VkCommandBuffer commandBuffer,
uint32_t vertexCount,
uint32_t instanceCount,
uint32_t firstVertex,
uint32_t firstInstance)
{
ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline;
const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline);
if (anv_batch_has_error(&cmd_buffer->batch))
return;
genX(cmd_buffer_flush_state)(cmd_buffer);
if (vs_prog_data->uses_basevertex || vs_prog_data->uses_baseinstance)
emit_base_vertex_instance(cmd_buffer, firstVertex, firstInstance);
if (vs_prog_data->uses_drawid)
emit_draw_index(cmd_buffer, 0);
/* Our implementation of VK_KHR_multiview uses instancing to draw the
* different views. We need to multiply instanceCount by the view count.
*/
instanceCount *= anv_subpass_view_count(cmd_buffer->state.subpass);
anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) {
prim.VertexAccessType = SEQUENTIAL;
prim.PrimitiveTopologyType = pipeline->topology;
prim.VertexCountPerInstance = vertexCount;
prim.StartVertexLocation = firstVertex;
prim.InstanceCount = instanceCount;
prim.StartInstanceLocation = firstInstance;
prim.BaseVertexLocation = 0;
}
}
void genX(CmdDrawIndexed)(
VkCommandBuffer commandBuffer,
uint32_t indexCount,
uint32_t instanceCount,
uint32_t firstIndex,
int32_t vertexOffset,
uint32_t firstInstance)
{
ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline;
const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline);
if (anv_batch_has_error(&cmd_buffer->batch))
return;
genX(cmd_buffer_flush_state)(cmd_buffer);
if (vs_prog_data->uses_basevertex || vs_prog_data->uses_baseinstance)
emit_base_vertex_instance(cmd_buffer, vertexOffset, firstInstance);
if (vs_prog_data->uses_drawid)
emit_draw_index(cmd_buffer, 0);
/* Our implementation of VK_KHR_multiview uses instancing to draw the
* different views. We need to multiply instanceCount by the view count.
*/
instanceCount *= anv_subpass_view_count(cmd_buffer->state.subpass);
anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) {
prim.VertexAccessType = RANDOM;
prim.PrimitiveTopologyType = pipeline->topology;
prim.VertexCountPerInstance = indexCount;
prim.StartVertexLocation = firstIndex;
prim.InstanceCount = instanceCount;
prim.StartInstanceLocation = firstInstance;
prim.BaseVertexLocation = vertexOffset;
}
}
/* Auto-Draw / Indirect Registers */
#define GEN7_3DPRIM_END_OFFSET 0x2420
#define GEN7_3DPRIM_START_VERTEX 0x2430
#define GEN7_3DPRIM_VERTEX_COUNT 0x2434
#define GEN7_3DPRIM_INSTANCE_COUNT 0x2438
#define GEN7_3DPRIM_START_INSTANCE 0x243C
#define GEN7_3DPRIM_BASE_VERTEX 0x2440
/* MI_MATH only exists on Haswell+ */
#if GEN_IS_HASWELL || GEN_GEN >= 8
static uint32_t
mi_alu(uint32_t opcode, uint32_t op1, uint32_t op2)
{
struct GENX(MI_MATH_ALU_INSTRUCTION) instr = {
.ALUOpcode = opcode,
.Operand1 = op1,
.Operand2 = op2,
};
uint32_t dw;
GENX(MI_MATH_ALU_INSTRUCTION_pack)(NULL, &dw, &instr);
return dw;
}
#define CS_GPR(n) (0x2600 + (n) * 8)
/* Emit dwords to multiply GPR0 by N */
static void
build_alu_multiply_gpr0(uint32_t *dw, unsigned *dw_count, uint32_t N)
{
VK_OUTARRAY_MAKE(out, dw, dw_count);
#define append_alu(opcode, operand1, operand2) \
vk_outarray_append(&out, alu_dw) *alu_dw = mi_alu(opcode, operand1, operand2)
assert(N > 0);
unsigned top_bit = 31 - __builtin_clz(N);
for (int i = top_bit - 1; i >= 0; i--) {
/* We get our initial data in GPR0 and we write the final data out to
* GPR0 but we use GPR1 as our scratch register.
*/
unsigned src_reg = i == top_bit - 1 ? MI_ALU_REG0 : MI_ALU_REG1;
unsigned dst_reg = i == 0 ? MI_ALU_REG0 : MI_ALU_REG1;
/* Shift the current value left by 1 */
append_alu(MI_ALU_LOAD, MI_ALU_SRCA, src_reg);
append_alu(MI_ALU_LOAD, MI_ALU_SRCB, src_reg);
append_alu(MI_ALU_ADD, 0, 0);
if (N & (1 << i)) {
/* Store ACCU to R1 and add R0 to R1 */
append_alu(MI_ALU_STORE, MI_ALU_REG1, MI_ALU_ACCU);
append_alu(MI_ALU_LOAD, MI_ALU_SRCA, MI_ALU_REG0);
append_alu(MI_ALU_LOAD, MI_ALU_SRCB, MI_ALU_REG1);
append_alu(MI_ALU_ADD, 0, 0);
}
append_alu(MI_ALU_STORE, dst_reg, MI_ALU_ACCU);
}
#undef append_alu
}
static void
emit_mul_gpr0(struct anv_batch *batch, uint32_t N)
{
uint32_t num_dwords;
build_alu_multiply_gpr0(NULL, &num_dwords, N);
uint32_t *dw = anv_batch_emitn(batch, 1 + num_dwords, GENX(MI_MATH));
build_alu_multiply_gpr0(dw + 1, &num_dwords, N);
}
#endif /* GEN_IS_HASWELL || GEN_GEN >= 8 */
static void
load_indirect_parameters(struct anv_cmd_buffer *cmd_buffer,
struct anv_buffer *buffer, uint64_t offset,
bool indexed)
{
struct anv_batch *batch = &cmd_buffer->batch;
struct anv_bo *bo = buffer->bo;
uint32_t bo_offset = buffer->offset + offset;
emit_lrm(batch, GEN7_3DPRIM_VERTEX_COUNT, bo, bo_offset);
unsigned view_count = anv_subpass_view_count(cmd_buffer->state.subpass);
if (view_count > 1) {
#if GEN_IS_HASWELL || GEN_GEN >= 8
emit_lrm(batch, CS_GPR(0), bo, bo_offset + 4);
emit_mul_gpr0(batch, view_count);
emit_lrr(batch, GEN7_3DPRIM_INSTANCE_COUNT, CS_GPR(0));
#else
anv_finishme("Multiview + indirect draw requires MI_MATH; "
"MI_MATH is not supported on Ivy Bridge");
emit_lrm(batch, GEN7_3DPRIM_INSTANCE_COUNT, bo, bo_offset + 4);
#endif
} else {
emit_lrm(batch, GEN7_3DPRIM_INSTANCE_COUNT, bo, bo_offset + 4);
}
emit_lrm(batch, GEN7_3DPRIM_START_VERTEX, bo, bo_offset + 8);
if (indexed) {
emit_lrm(batch, GEN7_3DPRIM_BASE_VERTEX, bo, bo_offset + 12);
emit_lrm(batch, GEN7_3DPRIM_START_INSTANCE, bo, bo_offset + 16);
} else {
emit_lrm(batch, GEN7_3DPRIM_START_INSTANCE, bo, bo_offset + 12);
emit_lri(batch, GEN7_3DPRIM_BASE_VERTEX, 0);
}
}
void genX(CmdDrawIndirect)(
VkCommandBuffer commandBuffer,
VkBuffer _buffer,
VkDeviceSize offset,
uint32_t drawCount,
uint32_t stride)
{
ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
ANV_FROM_HANDLE(anv_buffer, buffer, _buffer);
struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline;
const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline);
if (anv_batch_has_error(&cmd_buffer->batch))
return;
genX(cmd_buffer_flush_state)(cmd_buffer);
for (uint32_t i = 0; i < drawCount; i++) {
struct anv_bo *bo = buffer->bo;
uint32_t bo_offset = buffer->offset + offset;
if (vs_prog_data->uses_basevertex || vs_prog_data->uses_baseinstance)
emit_base_vertex_instance_bo(cmd_buffer, bo, bo_offset + 8);
if (vs_prog_data->uses_drawid)
emit_draw_index(cmd_buffer, i);
load_indirect_parameters(cmd_buffer, buffer, offset, false);
anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) {
prim.IndirectParameterEnable = true;
prim.VertexAccessType = SEQUENTIAL;
prim.PrimitiveTopologyType = pipeline->topology;
}
offset += stride;
}
}
void genX(CmdDrawIndexedIndirect)(
VkCommandBuffer commandBuffer,
VkBuffer _buffer,
VkDeviceSize offset,
uint32_t drawCount,
uint32_t stride)
{
ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
ANV_FROM_HANDLE(anv_buffer, buffer, _buffer);
struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline;
const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline);
if (anv_batch_has_error(&cmd_buffer->batch))
return;
genX(cmd_buffer_flush_state)(cmd_buffer);
for (uint32_t i = 0; i < drawCount; i++) {
struct anv_bo *bo = buffer->bo;
uint32_t bo_offset = buffer->offset + offset;
/* TODO: We need to stomp base vertex to 0 somehow */
if (vs_prog_data->uses_basevertex || vs_prog_data->uses_baseinstance)
emit_base_vertex_instance_bo(cmd_buffer, bo, bo_offset + 12);
if (vs_prog_data->uses_drawid)
emit_draw_index(cmd_buffer, i);
load_indirect_parameters(cmd_buffer, buffer, offset, true);
anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) {
prim.IndirectParameterEnable = true;
prim.VertexAccessType = RANDOM;
prim.PrimitiveTopologyType = pipeline->topology;
}
offset += stride;
}
}
static VkResult
flush_compute_descriptor_set(struct anv_cmd_buffer *cmd_buffer)
{
struct anv_pipeline *pipeline = cmd_buffer->state.compute.base.pipeline;
struct anv_state surfaces = { 0, }, samplers = { 0, };
VkResult result;
result = emit_binding_table(cmd_buffer, MESA_SHADER_COMPUTE, &surfaces);
if (result != VK_SUCCESS) {
assert(result == VK_ERROR_OUT_OF_DEVICE_MEMORY);
result = anv_cmd_buffer_new_binding_table_block(cmd_buffer);
if (result != VK_SUCCESS)
return result;
/* Re-emit state base addresses so we get the new surface state base
* address before we start emitting binding tables etc.
*/
genX(cmd_buffer_emit_state_base_address)(cmd_buffer);
result = emit_binding_table(cmd_buffer, MESA_SHADER_COMPUTE, &surfaces);
if (result != VK_SUCCESS) {
anv_batch_set_error(&cmd_buffer->batch, result);
return result;
}
}
result = emit_samplers(cmd_buffer, MESA_SHADER_COMPUTE, &samplers);
if (result != VK_SUCCESS) {
anv_batch_set_error(&cmd_buffer->batch, result);
return result;
}
uint32_t iface_desc_data_dw[GENX(INTERFACE_DESCRIPTOR_DATA_length)];
struct GENX(INTERFACE_DESCRIPTOR_DATA) desc = {
.BindingTablePointer = surfaces.offset,
.SamplerStatePointer = samplers.offset,
};
GENX(INTERFACE_DESCRIPTOR_DATA_pack)(NULL, iface_desc_data_dw, &desc);
struct anv_state state =
anv_cmd_buffer_merge_dynamic(cmd_buffer, iface_desc_data_dw,
pipeline->interface_descriptor_data,
GENX(INTERFACE_DESCRIPTOR_DATA_length),
64);
uint32_t size = GENX(INTERFACE_DESCRIPTOR_DATA_length) * sizeof(uint32_t);
anv_batch_emit(&cmd_buffer->batch,
GENX(MEDIA_INTERFACE_DESCRIPTOR_LOAD), mid) {
mid.InterfaceDescriptorTotalLength = size;
mid.InterfaceDescriptorDataStartAddress = state.offset;
}
return VK_SUCCESS;
}
void
genX(cmd_buffer_flush_compute_state)(struct anv_cmd_buffer *cmd_buffer)
{
struct anv_pipeline *pipeline = cmd_buffer->state.compute.base.pipeline;
MAYBE_UNUSED VkResult result;
assert(pipeline->active_stages == VK_SHADER_STAGE_COMPUTE_BIT);
genX(cmd_buffer_config_l3)(cmd_buffer, pipeline->urb.l3_config);
genX(flush_pipeline_select_gpgpu)(cmd_buffer);
if (cmd_buffer->state.compute.pipeline_dirty) {
/* From the Sky Lake PRM Vol 2a, MEDIA_VFE_STATE:
*
* "A stalling PIPE_CONTROL is required before MEDIA_VFE_STATE unless
* the only bits that are changed are scoreboard related: Scoreboard
* Enable, Scoreboard Type, Scoreboard Mask, Scoreboard * Delta. For
* these scoreboard related states, a MEDIA_STATE_FLUSH is
* sufficient."
*/
cmd_buffer->state.pending_pipe_bits |= ANV_PIPE_CS_STALL_BIT;
genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer);
anv_batch_emit_batch(&cmd_buffer->batch, &pipeline->batch);
}
if ((cmd_buffer->state.descriptors_dirty & VK_SHADER_STAGE_COMPUTE_BIT) ||
cmd_buffer->state.compute.pipeline_dirty) {
/* FIXME: figure out descriptors for gen7 */
result = flush_compute_descriptor_set(cmd_buffer);
if (result != VK_SUCCESS)
return;
cmd_buffer->state.descriptors_dirty &= ~VK_SHADER_STAGE_COMPUTE_BIT;
}
if (cmd_buffer->state.push_constants_dirty & VK_SHADER_STAGE_COMPUTE_BIT) {
struct anv_state push_state =
anv_cmd_buffer_cs_push_constants(cmd_buffer);
if (push_state.alloc_size) {
anv_batch_emit(&cmd_buffer->batch, GENX(MEDIA_CURBE_LOAD), curbe) {
curbe.CURBETotalDataLength = push_state.alloc_size;
curbe.CURBEDataStartAddress = push_state.offset;
}
}
}
cmd_buffer->state.compute.pipeline_dirty = false;
genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer);
}
#if GEN_GEN == 7
static VkResult
verify_cmd_parser(const struct anv_device *device,
int required_version,
const char *function)
{
if (device->instance->physicalDevice.cmd_parser_version < required_version) {
return vk_errorf(device->instance, device->instance,
VK_ERROR_FEATURE_NOT_PRESENT,
"cmd parser version %d is required for %s",
required_version, function);
} else {
return VK_SUCCESS;
}
}
#endif
void genX(CmdDispatch)(
VkCommandBuffer commandBuffer,
uint32_t x,
uint32_t y,
uint32_t z)
{
ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
struct anv_pipeline *pipeline = cmd_buffer->state.compute.base.pipeline;
const struct brw_cs_prog_data *prog_data = get_cs_prog_data(pipeline);
if (anv_batch_has_error(&cmd_buffer->batch))
return;
if (prog_data->uses_num_work_groups) {
struct anv_state state =
anv_cmd_buffer_alloc_dynamic_state(cmd_buffer, 12, 4);
uint32_t *sizes = state.map;
sizes[0] = x;
sizes[1] = y;
sizes[2] = z;
anv_state_flush(cmd_buffer->device, state);
cmd_buffer->state.compute.num_workgroups = (struct anv_address) {
.bo = &cmd_buffer->device->dynamic_state_pool.block_pool.bo,
.offset = state.offset,
};
}
genX(cmd_buffer_flush_compute_state)(cmd_buffer);
anv_batch_emit(&cmd_buffer->batch, GENX(GPGPU_WALKER), ggw) {
ggw.SIMDSize = prog_data->simd_size / 16;
ggw.ThreadDepthCounterMaximum = 0;
ggw.ThreadHeightCounterMaximum = 0;
ggw.ThreadWidthCounterMaximum = prog_data->threads - 1;
ggw.ThreadGroupIDXDimension = x;
ggw.ThreadGroupIDYDimension = y;
ggw.ThreadGroupIDZDimension = z;
ggw.RightExecutionMask = pipeline->cs_right_mask;
ggw.BottomExecutionMask = 0xffffffff;
}
anv_batch_emit(&cmd_buffer->batch, GENX(MEDIA_STATE_FLUSH), msf);
}
#define GPGPU_DISPATCHDIMX 0x2500
#define GPGPU_DISPATCHDIMY 0x2504
#define GPGPU_DISPATCHDIMZ 0x2508
void genX(CmdDispatchIndirect)(
VkCommandBuffer commandBuffer,
VkBuffer _buffer,
VkDeviceSize offset)
{
ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
ANV_FROM_HANDLE(anv_buffer, buffer, _buffer);
struct anv_pipeline *pipeline = cmd_buffer->state.compute.base.pipeline;
const struct brw_cs_prog_data *prog_data = get_cs_prog_data(pipeline);
struct anv_bo *bo = buffer->bo;
uint32_t bo_offset = buffer->offset + offset;
struct anv_batch *batch = &cmd_buffer->batch;
#if GEN_GEN == 7
/* Linux 4.4 added command parser version 5 which allows the GPGPU
* indirect dispatch registers to be written.
*/
if (verify_cmd_parser(cmd_buffer->device, 5,
"vkCmdDispatchIndirect") != VK_SUCCESS)
return;
#endif
if (prog_data->uses_num_work_groups) {
cmd_buffer->state.compute.num_workgroups = (struct anv_address) {
.bo = bo,
.offset = bo_offset,
};
}
genX(cmd_buffer_flush_compute_state)(cmd_buffer);
emit_lrm(batch, GPGPU_DISPATCHDIMX, bo, bo_offset);
emit_lrm(batch, GPGPU_DISPATCHDIMY, bo, bo_offset + 4);
emit_lrm(batch, GPGPU_DISPATCHDIMZ, bo, bo_offset + 8);
#if GEN_GEN <= 7
/* Clear upper 32-bits of SRC0 and all 64-bits of SRC1 */
emit_lri(batch, MI_PREDICATE_SRC0 + 4, 0);
emit_lri(batch, MI_PREDICATE_SRC1 + 0, 0);
emit_lri(batch, MI_PREDICATE_SRC1 + 4, 0);
/* Load compute_dispatch_indirect_x_size into SRC0 */
emit_lrm(batch, MI_PREDICATE_SRC0, bo, bo_offset + 0);
/* predicate = (compute_dispatch_indirect_x_size == 0); */
anv_batch_emit(batch, GENX(MI_PREDICATE), mip) {
mip.LoadOperation = LOAD_LOAD;
mip.CombineOperation = COMBINE_SET;
mip.CompareOperation = COMPARE_SRCS_EQUAL;
}
/* Load compute_dispatch_indirect_y_size into SRC0 */
emit_lrm(batch, MI_PREDICATE_SRC0, bo, bo_offset + 4);
/* predicate |= (compute_dispatch_indirect_y_size == 0); */
anv_batch_emit(batch, GENX(MI_PREDICATE), mip) {
mip.LoadOperation = LOAD_LOAD;
mip.CombineOperation = COMBINE_OR;
mip.CompareOperation = COMPARE_SRCS_EQUAL;
}
/* Load compute_dispatch_indirect_z_size into SRC0 */
emit_lrm(batch, MI_PREDICATE_SRC0, bo, bo_offset + 8);
/* predicate |= (compute_dispatch_indirect_z_size == 0); */
anv_batch_emit(batch, GENX(MI_PREDICATE), mip) {
mip.LoadOperation = LOAD_LOAD;
mip.CombineOperation = COMBINE_OR;
mip.CompareOperation = COMPARE_SRCS_EQUAL;
}
/* predicate = !predicate; */
#define COMPARE_FALSE 1
anv_batch_emit(batch, GENX(MI_PREDICATE), mip) {
mip.LoadOperation = LOAD_LOADINV;
mip.CombineOperation = COMBINE_OR;
mip.CompareOperation = COMPARE_FALSE;
}
#endif
anv_batch_emit(batch, GENX(GPGPU_WALKER), ggw) {
ggw.IndirectParameterEnable = true;
ggw.PredicateEnable = GEN_GEN <= 7;
ggw.SIMDSize = prog_data->simd_size / 16;
ggw.ThreadDepthCounterMaximum = 0;
ggw.ThreadHeightCounterMaximum = 0;
ggw.ThreadWidthCounterMaximum = prog_data->threads - 1;
ggw.RightExecutionMask = pipeline->cs_right_mask;
ggw.BottomExecutionMask = 0xffffffff;
}
anv_batch_emit(batch, GENX(MEDIA_STATE_FLUSH), msf);
}
static void
genX(flush_pipeline_select)(struct anv_cmd_buffer *cmd_buffer,
uint32_t pipeline)
{
UNUSED const struct gen_device_info *devinfo = &cmd_buffer->device->info;
if (cmd_buffer->state.current_pipeline == pipeline)
return;
#if GEN_GEN >= 8 && GEN_GEN < 10
/* From the Broadwell PRM, Volume 2a: Instructions, PIPELINE_SELECT:
*
* Software must clear the COLOR_CALC_STATE Valid field in
* 3DSTATE_CC_STATE_POINTERS command prior to send a PIPELINE_SELECT
* with Pipeline Select set to GPGPU.
*
* The internal hardware docs recommend the same workaround for Gen9
* hardware too.
*/
if (pipeline == GPGPU)
anv_batch_emit(&cmd_buffer->batch, GENX(3DSTATE_CC_STATE_POINTERS), t);
#endif
/* From "BXML » GT » MI » vol1a GPU Overview » [Instruction]
* PIPELINE_SELECT [DevBWR+]":
*
* Project: DEVSNB+
*
* Software must ensure all the write caches are flushed through a
* stalling PIPE_CONTROL command followed by another PIPE_CONTROL
* command to invalidate read only caches prior to programming
* MI_PIPELINE_SELECT command to change the Pipeline Select Mode.
*/
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
pc.RenderTargetCacheFlushEnable = true;
pc.DepthCacheFlushEnable = true;
pc.DCFlushEnable = true;
pc.PostSyncOperation = NoWrite;
pc.CommandStreamerStallEnable = true;
}
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) {
pc.TextureCacheInvalidationEnable = true;
pc.ConstantCacheInvalidationEnable = true;
pc.StateCacheInvalidationEnable = true;
pc.InstructionCacheInvalidateEnable = true;
pc.PostSyncOperation = NoWrite;
}
anv_batch_emit(&cmd_buffer->batch, GENX(PIPELINE_SELECT), ps) {
#if GEN_GEN >= 9
ps.MaskBits = 3;
#endif
ps.PipelineSelection = pipeline;
}
#if GEN_GEN == 9
if (devinfo->is_geminilake) {
/* Project: DevGLK
*
* "This chicken bit works around a hardware issue with barrier logic
* encountered when switching between GPGPU and 3D pipelines. To
* workaround the issue, this mode bit should be set after a pipeline
* is selected."
*/
uint32_t scec;
anv_pack_struct(&scec, GENX(SLICE_COMMON_ECO_CHICKEN1),
.GLKBarrierMode =
pipeline == GPGPU ? GLK_BARRIER_MODE_GPGPU
: GLK_BARRIER_MODE_3D_HULL,
.GLKBarrierModeMask = 1);
emit_lri(&cmd_buffer->batch, GENX(SLICE_COMMON_ECO_CHICKEN1_num), scec);
}
#endif
cmd_buffer->state.current_pipeline = pipeline;
}
void
genX(flush_pipeline_select_3d)(struct anv_cmd_buffer *cmd_buffer)
{
genX(flush_pipeline_select)(cmd_buffer, _3D);
}
void
genX(flush_pipeline_select_gpgpu)(struct anv_cmd_buffer *cmd_buffer)
{
genX(flush_pipeline_select)(cmd_buffer, GPGPU);
}
void
genX(cmd_buffer_emit_gen7_depth_flush)(struct anv_cmd_buffer *cmd_buffer)
{
if (GEN_GEN >= 8)
return;
/* From the Haswell PRM, documentation for 3DSTATE_DEPTH_BUFFER:
*
* "Restriction: Prior to changing Depth/Stencil Buffer state (i.e., any
* combination of 3DSTATE_DEPTH_BUFFER, 3DSTATE_CLEAR_PARAMS,
* 3DSTATE_STENCIL_BUFFER, 3DSTATE_HIER_DEPTH_BUFFER) SW must first
* issue a pipelined depth stall (PIPE_CONTROL with Depth Stall bit
* set), followed by a pipelined depth cache flush (PIPE_CONTROL with
* Depth Flush Bit set, followed by another pipelined depth stall
* (PIPE_CONTROL with Depth Stall Bit set), unless SW can otherwise
* guarantee that the pipeline from WM onwards is already flushed (e.g.,
* via a preceding MI_FLUSH)."
*/
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) {
pipe.DepthStallEnable = true;
}
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) {
pipe.DepthCacheFlushEnable = true;
}
anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) {
pipe.DepthStallEnable = true;
}
}
static void
cmd_buffer_emit_depth_stencil(struct anv_cmd_buffer *cmd_buffer)
{
struct anv_device *device = cmd_buffer->device;
const struct anv_image_view *iview =
anv_cmd_buffer_get_depth_stencil_view(cmd_buffer);
const struct anv_image *image = iview ? iview->image : NULL;
/* FIXME: Width and Height are wrong */
genX(cmd_buffer_emit_gen7_depth_flush)(cmd_buffer);
uint32_t *dw = anv_batch_emit_dwords(&cmd_buffer->batch,
device->isl_dev.ds.size / 4);
if (dw == NULL)
return;
struct isl_depth_stencil_hiz_emit_info info = {
.mocs = device->default_mocs,
};
if (iview)
info.view = &iview->planes[0].isl;
if (image && (image->aspects & VK_IMAGE_ASPECT_DEPTH_BIT)) {
uint32_t depth_plane =
anv_image_aspect_to_plane(image->aspects, VK_IMAGE_ASPECT_DEPTH_BIT);
const struct anv_surface *surface = &image->planes[depth_plane].surface;
info.depth_surf = &surface->isl;
info.depth_address =
anv_batch_emit_reloc(&cmd_buffer->batch,
dw + device->isl_dev.ds.depth_offset / 4,
image->planes[depth_plane].bo,
image->planes[depth_plane].bo_offset +
surface->offset);
const uint32_t ds =
cmd_buffer->state.subpass->depth_stencil_attachment.attachment;
info.hiz_usage = cmd_buffer->state.attachments[ds].aux_usage;
if (info.hiz_usage == ISL_AUX_USAGE_HIZ) {
info.hiz_surf = &image->planes[depth_plane].aux_surface.isl;
info.hiz_address =
anv_batch_emit_reloc(&cmd_buffer->batch,
dw + device->isl_dev.ds.hiz_offset / 4,
image->planes[depth_plane].bo,
image->planes[depth_plane].bo_offset +
image->planes[depth_plane].aux_surface.offset);
info.depth_clear_value = ANV_HZ_FC_VAL;
}
}
if (image && (image->aspects & VK_IMAGE_ASPECT_STENCIL_BIT)) {
uint32_t stencil_plane =
anv_image_aspect_to_plane(image->aspects, VK_IMAGE_ASPECT_STENCIL_BIT);
const struct anv_surface *surface = &image->planes[stencil_plane].surface;
info.stencil_surf = &surface->isl;
info.stencil_address =
anv_batch_emit_reloc(&cmd_buffer->batch,
dw + device->isl_dev.ds.stencil_offset / 4,
image->planes[stencil_plane].bo,
image->planes[stencil_plane].bo_offset + surface->offset);
}
isl_emit_depth_stencil_hiz_s(&device->isl_dev, dw, &info);
cmd_buffer->state.hiz_enabled = info.hiz_usage == ISL_AUX_USAGE_HIZ;
}
/**
* @brief Perform any layout transitions required at the beginning and/or end
* of the current subpass for depth buffers.
*
* TODO: Consider preprocessing the attachment reference array at render pass
* create time to determine if no layout transition is needed at the
* beginning and/or end of each subpass.
*
* @param cmd_buffer The command buffer the transition is happening within.
* @param subpass_end If true, marks that the transition is happening at the
* end of the subpass.
*/
static void
cmd_buffer_subpass_transition_layouts(struct anv_cmd_buffer * const cmd_buffer,
const bool subpass_end)
{
/* We need a non-NULL command buffer. */
assert(cmd_buffer);
const struct anv_cmd_state * const cmd_state = &cmd_buffer->state;
const struct anv_subpass * const subpass = cmd_state->subpass;
/* This function must be called within a subpass. */
assert(subpass);
/* If there are attachment references, the array shouldn't be NULL.
*/
if (subpass->attachment_count > 0)
assert(subpass->attachments);
/* Iterate over the array of attachment references. */
for (const VkAttachmentReference *att_ref = subpass->attachments;
att_ref < subpass->attachments + subpass->attachment_count; att_ref++) {
/* If the attachment is unused, we can't perform a layout transition. */
if (att_ref->attachment == VK_ATTACHMENT_UNUSED)
continue;
/* This attachment index shouldn't go out of bounds. */
assert(att_ref->attachment < cmd_state->pass->attachment_count);
const struct anv_render_pass_attachment * const att_desc =
&cmd_state->pass->attachments[att_ref->attachment];
struct anv_attachment_state * const att_state =
&cmd_buffer->state.attachments[att_ref->attachment];
/* The attachment should not be used in a subpass after its last. */
assert(att_desc->last_subpass_idx >= anv_get_subpass_id(cmd_state));
if (subpass_end && anv_get_subpass_id(cmd_state) <
att_desc->last_subpass_idx) {
/* We're calling this function on a buffer twice in one subpass and
* this is not the last use of the buffer. The layout should not have
* changed from the first call and no transition is necessary.
*/
assert(att_state->current_layout == att_ref->layout ||
att_state->current_layout ==
VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL);
continue;
}
/* The attachment index must be less than the number of attachments
* within the framebuffer.
*/
assert(att_ref->attachment < cmd_state->framebuffer->attachment_count);
const struct anv_image_view * const iview =
cmd_state->framebuffer->attachments[att_ref->attachment];
const struct anv_image * const image = iview->image;
/* Get the appropriate target layout for this attachment. */
VkImageLayout target_layout;
/* A resolve is necessary before use as an input attachment if the clear
* color or auxiliary buffer usage isn't supported by the sampler.
*/
const bool input_needs_resolve =
(att_state->fast_clear && !att_state->clear_color_is_zero_one) ||
att_state->input_aux_usage != att_state->aux_usage;
if (subpass_end) {
target_layout = att_desc->final_layout;
} else if (iview->aspect_mask & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV &&
!input_needs_resolve) {
/* Layout transitions before the final only help to enable sampling as
* an input attachment. If the input attachment supports sampling
* using the auxiliary surface, we can skip such transitions by making
* the target layout one that is CCS-aware.
*/
target_layout = VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL;
} else {
target_layout = att_ref->layout;
}
/* Perform the layout transition. */
if (image->aspects & VK_IMAGE_ASPECT_DEPTH_BIT) {
transition_depth_buffer(cmd_buffer, image,
att_state->current_layout, target_layout);
att_state->aux_usage =
anv_layout_to_aux_usage(&cmd_buffer->device->info, image,
VK_IMAGE_ASPECT_DEPTH_BIT, target_layout);
} else if (image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) {
assert(image->aspects == VK_IMAGE_ASPECT_COLOR_BIT);
transition_color_buffer(cmd_buffer, image, VK_IMAGE_ASPECT_COLOR_BIT,
iview->planes[0].isl.base_level, 1,
iview->planes[0].isl.base_array_layer,
iview->planes[0].isl.array_len,
att_state->current_layout, target_layout);
}
att_state->current_layout = target_layout;
}
}
/* Update the clear value dword(s) in surface state objects or the fast clear
* state buffer entry for the color attachments used in this subpass.
*/
static void
cmd_buffer_subpass_sync_fast_clear_values(struct anv_cmd_buffer *cmd_buffer)
{
assert(cmd_buffer && cmd_buffer->state.subpass);
const struct anv_cmd_state *state = &cmd_buffer->state;
/* Iterate through every color attachment used in this subpass. */
for (uint32_t i = 0; i < state->subpass->color_count; ++i) {
/* The attachment should be one of the attachments described in the
* render pass and used in the subpass.
*/
const uint32_t a = state->subpass->color_attachments[i].attachment;
if (a == VK_ATTACHMENT_UNUSED)
continue;
assert(a < state->pass->attachment_count);
/* Store some information regarding this attachment. */
const struct anv_attachment_state *att_state = &state->attachments[a];
const struct anv_image_view *iview = state->framebuffer->attachments[a];
const struct anv_render_pass_attachment *rp_att =
&state->pass->attachments[a];
if (att_state->aux_usage == ISL_AUX_USAGE_NONE)
continue;
/* The fast clear state entry must be updated if a fast clear is going to
* happen. The surface state must be updated if the clear value from a
* prior fast clear may be needed.
*/
if (att_state->pending_clear_aspects && att_state->fast_clear) {
/* Update the fast clear state entry. */
genX(copy_fast_clear_dwords)(cmd_buffer, att_state->color.state,
iview->image,
VK_IMAGE_ASPECT_COLOR_BIT,
iview->planes[0].isl.base_level,
true /* copy from ss */);
/* Fast-clears impact whether or not a resolve will be necessary. */
if (iview->image->planes[0].aux_usage == ISL_AUX_USAGE_CCS_E &&
att_state->clear_color_is_zero) {
/* This image always has the auxiliary buffer enabled. We can mark
* the subresource as not needing a resolve because the clear color
* will match what's in every RENDER_SURFACE_STATE object when it's
* being used for sampling.
*/
genX(set_image_needs_resolve)(cmd_buffer, iview->image,
VK_IMAGE_ASPECT_COLOR_BIT,
iview->planes[0].isl.base_level,
false);
} else {
genX(set_image_needs_resolve)(cmd_buffer, iview->image,
VK_IMAGE_ASPECT_COLOR_BIT,
iview->planes[0].isl.base_level,
true);
}
} else if (rp_att->load_op == VK_ATTACHMENT_LOAD_OP_LOAD) {
/* The attachment may have been fast-cleared in a previous render
* pass and the value is needed now. Update the surface state(s).
*
* TODO: Do this only once per render pass instead of every subpass.
*/
genX(copy_fast_clear_dwords)(cmd_buffer, att_state->color.state,
iview->image,
VK_IMAGE_ASPECT_COLOR_BIT,
iview->planes[0].isl.base_level,
false /* copy to ss */);
if (need_input_attachment_state(rp_att) &&
att_state->input_aux_usage != ISL_AUX_USAGE_NONE) {
genX(copy_fast_clear_dwords)(cmd_buffer, att_state->input.state,
iview->image,
VK_IMAGE_ASPECT_COLOR_BIT,
iview->planes[0].isl.base_level,
false /* copy to ss */);
}
}
}
}
static void
genX(cmd_buffer_set_subpass)(struct anv_cmd_buffer *cmd_buffer,
struct anv_subpass *subpass)
{
cmd_buffer->state.subpass = subpass;
cmd_buffer->state.gfx.dirty |= ANV_CMD_DIRTY_RENDER_TARGETS;
/* Our implementation of VK_KHR_multiview uses instancing to draw the
* different views. If the client asks for instancing, we need to use the
* Instance Data Step Rate to ensure that we repeat the client's
* per-instance data once for each view. Since this bit is in
* VERTEX_BUFFER_STATE on gen7, we need to dirty vertex buffers at the top
* of each subpass.
*/
if (GEN_GEN == 7)
cmd_buffer->state.gfx.vb_dirty |= ~0;
/* It is possible to start a render pass with an old pipeline. Because the
* render pass and subpass index are both baked into the pipeline, this is
* highly unlikely. In order to do so, it requires that you have a render
* pass with a single subpass and that you use that render pass twice
* back-to-back and use the same pipeline at the start of the second render
* pass as at the end of the first. In order to avoid unpredictable issues
* with this edge case, we just dirty the pipeline at the start of every
* subpass.
*/
cmd_buffer->state.gfx.dirty |= ANV_CMD_DIRTY_PIPELINE;
/* Perform transitions to the subpass layout before any writes have
* occurred.
*/
cmd_buffer_subpass_transition_layouts(cmd_buffer, false);
/* Update clear values *after* performing automatic layout transitions.
* This ensures that transitions from the UNDEFINED layout have had a chance
* to populate the clear value buffer with the correct values for the
* LOAD_OP_LOAD loadOp and that the fast-clears will update the buffer
* without the aforementioned layout transition overwriting the fast-clear
* value.
*/
cmd_buffer_subpass_sync_fast_clear_values(cmd_buffer);
cmd_buffer_emit_depth_stencil(cmd_buffer);
anv_cmd_buffer_clear_subpass(cmd_buffer);
}
void genX(CmdBeginRenderPass)(
VkCommandBuffer commandBuffer,
const VkRenderPassBeginInfo* pRenderPassBegin,
VkSubpassContents contents)
{
ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
ANV_FROM_HANDLE(anv_render_pass, pass, pRenderPassBegin->renderPass);
ANV_FROM_HANDLE(anv_framebuffer, framebuffer, pRenderPassBegin->framebuffer);
cmd_buffer->state.framebuffer = framebuffer;
cmd_buffer->state.pass = pass;
cmd_buffer->state.render_area = pRenderPassBegin->renderArea;
VkResult result =
genX(cmd_buffer_setup_attachments)(cmd_buffer, pass, pRenderPassBegin);
/* If we failed to setup the attachments we should not try to go further */
if (result != VK_SUCCESS) {
assert(anv_batch_has_error(&cmd_buffer->batch));
return;
}
genX(flush_pipeline_select_3d)(cmd_buffer);
genX(cmd_buffer_set_subpass)(cmd_buffer, pass->subpasses);
cmd_buffer->state.pending_pipe_bits |=
cmd_buffer->state.pass->subpass_flushes[0];
}
void genX(CmdNextSubpass)(
VkCommandBuffer commandBuffer,
VkSubpassContents contents)
{
ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
if (anv_batch_has_error(&cmd_buffer->batch))
return;
assert(cmd_buffer->level == VK_COMMAND_BUFFER_LEVEL_PRIMARY);
anv_cmd_buffer_resolve_subpass(cmd_buffer);
/* Perform transitions to the final layout after all writes have occurred.
*/
cmd_buffer_subpass_transition_layouts(cmd_buffer, true);
genX(cmd_buffer_set_subpass)(cmd_buffer, cmd_buffer->state.subpass + 1);
uint32_t subpass_id = anv_get_subpass_id(&cmd_buffer->state);
cmd_buffer->state.pending_pipe_bits |=
cmd_buffer->state.pass->subpass_flushes[subpass_id];
}
void genX(CmdEndRenderPass)(
VkCommandBuffer commandBuffer)
{
ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer);
if (anv_batch_has_error(&cmd_buffer->batch))
return;
anv_cmd_buffer_resolve_subpass(cmd_buffer);
/* Perform transitions to the final layout after all writes have occurred.
*/
cmd_buffer_subpass_transition_layouts(cmd_buffer, true);
cmd_buffer->state.pending_pipe_bits |=
cmd_buffer->state.pass->subpass_flushes[cmd_buffer->state.pass->subpass_count];
cmd_buffer->state.hiz_enabled = false;
#ifndef NDEBUG
anv_dump_add_framebuffer(cmd_buffer, cmd_buffer->state.framebuffer);
#endif
/* Remove references to render pass specific state. This enables us to
* detect whether or not we're in a renderpass.
*/
cmd_buffer->state.framebuffer = NULL;
cmd_buffer->state.pass = NULL;
cmd_buffer->state.subpass = NULL;
}