/*===--- ConvertUTF.c - Universal Character Names conversions ---------------===
*
* The LLVM Compiler Infrastructure
*
* This file is distributed under the University of Illinois Open Source
* License. See LICENSE.TXT for details.
*
*===------------------------------------------------------------------------=*/
/*
* Copyright 2001-2004 Unicode, Inc.
*
* Disclaimer
*
* This source code is provided as is by Unicode, Inc. No claims are
* made as to fitness for any particular purpose. No warranties of any
* kind are expressed or implied. The recipient agrees to determine
* applicability of information provided. If this file has been
* purchased on magnetic or optical media from Unicode, Inc., the
* sole remedy for any claim will be exchange of defective media
* within 90 days of receipt.
*
* Limitations on Rights to Redistribute This Code
*
* Unicode, Inc. hereby grants the right to freely use the information
* supplied in this file in the creation of products supporting the
* Unicode Standard, and to make copies of this file in any form
* for internal or external distribution as long as this notice
* remains attached.
*/
/* ---------------------------------------------------------------------
Conversions between UTF32, UTF-16, and UTF-8. Source code file.
Author: Mark E. Davis, 1994.
Rev History: Rick McGowan, fixes & updates May 2001.
Sept 2001: fixed const & error conditions per
mods suggested by S. Parent & A. Lillich.
June 2002: Tim Dodd added detection and handling of incomplete
source sequences, enhanced error detection, added casts
to eliminate compiler warnings.
July 2003: slight mods to back out aggressive FFFE detection.
Jan 2004: updated switches in from-UTF8 conversions.
Oct 2004: updated to use UNI_MAX_LEGAL_UTF32 in UTF-32 conversions.
See the header file "ConvertUTF.h" for complete documentation.
------------------------------------------------------------------------ */
#include "llvm/Support/ConvertUTF.h"
#ifdef CVTUTF_DEBUG
#include <stdio.h>
#endif
#include <assert.h>
/*
* This code extensively uses fall-through switches.
* Keep the compiler from warning about that.
*/
#if defined(__clang__) && defined(__has_warning)
# if __has_warning("-Wimplicit-fallthrough")
# define ConvertUTF_DISABLE_WARNINGS \
_Pragma("clang diagnostic push") \
_Pragma("clang diagnostic ignored \"-Wimplicit-fallthrough\"")
# define ConvertUTF_RESTORE_WARNINGS \
_Pragma("clang diagnostic pop")
# endif
#elif defined(__GNUC__) && __GNUC__ > 6
# define ConvertUTF_DISABLE_WARNINGS \
_Pragma("GCC diagnostic push") \
_Pragma("GCC diagnostic ignored \"-Wimplicit-fallthrough\"")
# define ConvertUTF_RESTORE_WARNINGS \
_Pragma("GCC diagnostic pop")
#endif
#ifndef ConvertUTF_DISABLE_WARNINGS
# define ConvertUTF_DISABLE_WARNINGS
#endif
#ifndef ConvertUTF_RESTORE_WARNINGS
# define ConvertUTF_RESTORE_WARNINGS
#endif
ConvertUTF_DISABLE_WARNINGS
namespace llvm {
static const int halfShift = 10; /* used for shifting by 10 bits */
static const UTF32 halfBase = 0x0010000UL;
static const UTF32 halfMask = 0x3FFUL;
#define UNI_SUR_HIGH_START (UTF32)0xD800
#define UNI_SUR_HIGH_END (UTF32)0xDBFF
#define UNI_SUR_LOW_START (UTF32)0xDC00
#define UNI_SUR_LOW_END (UTF32)0xDFFF
/* --------------------------------------------------------------------- */
/*
* Index into the table below with the first byte of a UTF-8 sequence to
* get the number of trailing bytes that are supposed to follow it.
* Note that *legal* UTF-8 values can't have 4 or 5-bytes. The table is
* left as-is for anyone who may want to do such conversion, which was
* allowed in earlier algorithms.
*/
static const char trailingBytesForUTF8[256] = {
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0, 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,
2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, 3,3,3,3,3,3,3,3,4,4,4,4,5,5,5,5
};
/*
* Magic values subtracted from a buffer value during UTF8 conversion.
* This table contains as many values as there might be trailing bytes
* in a UTF-8 sequence.
*/
static const UTF32 offsetsFromUTF8[6] = { 0x00000000UL, 0x00003080UL, 0x000E2080UL,
0x03C82080UL, 0xFA082080UL, 0x82082080UL };
/*
* Once the bits are split out into bytes of UTF-8, this is a mask OR-ed
* into the first byte, depending on how many bytes follow. There are
* as many entries in this table as there are UTF-8 sequence types.
* (I.e., one byte sequence, two byte... etc.). Remember that sequencs
* for *legal* UTF-8 will be 4 or fewer bytes total.
*/
static const UTF8 firstByteMark[7] = { 0x00, 0x00, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC };
/* --------------------------------------------------------------------- */
/* The interface converts a whole buffer to avoid function-call overhead.
* Constants have been gathered. Loops & conditionals have been removed as
* much as possible for efficiency, in favor of drop-through switches.
* (See "Note A" at the bottom of the file for equivalent code.)
* If your compiler supports it, the "isLegalUTF8" call can be turned
* into an inline function.
*/
/* --------------------------------------------------------------------- */
ConversionResult ConvertUTF32toUTF16 (
const UTF32** sourceStart, const UTF32* sourceEnd,
UTF16** targetStart, UTF16* targetEnd, ConversionFlags flags) {
ConversionResult result = conversionOK;
const UTF32* source = *sourceStart;
UTF16* target = *targetStart;
while (source < sourceEnd) {
UTF32 ch;
if (target >= targetEnd) {
result = targetExhausted; break;
}
ch = *source++;
if (ch <= UNI_MAX_BMP) { /* Target is a character <= 0xFFFF */
/* UTF-16 surrogate values are illegal in UTF-32; 0xffff or 0xfffe are both reserved values */
if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END) {
if (flags == strictConversion) {
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
} else {
*target++ = UNI_REPLACEMENT_CHAR;
}
} else {
*target++ = (UTF16)ch; /* normal case */
}
} else if (ch > UNI_MAX_LEGAL_UTF32) {
if (flags == strictConversion) {
result = sourceIllegal;
} else {
*target++ = UNI_REPLACEMENT_CHAR;
}
} else {
/* target is a character in range 0xFFFF - 0x10FFFF. */
if (target + 1 >= targetEnd) {
--source; /* Back up source pointer! */
result = targetExhausted; break;
}
ch -= halfBase;
*target++ = (UTF16)((ch >> halfShift) + UNI_SUR_HIGH_START);
*target++ = (UTF16)((ch & halfMask) + UNI_SUR_LOW_START);
}
}
*sourceStart = source;
*targetStart = target;
return result;
}
/* --------------------------------------------------------------------- */
ConversionResult ConvertUTF16toUTF32 (
const UTF16** sourceStart, const UTF16* sourceEnd,
UTF32** targetStart, UTF32* targetEnd, ConversionFlags flags) {
ConversionResult result = conversionOK;
const UTF16* source = *sourceStart;
UTF32* target = *targetStart;
UTF32 ch, ch2;
while (source < sourceEnd) {
const UTF16* oldSource = source; /* In case we have to back up because of target overflow. */
ch = *source++;
/* If we have a surrogate pair, convert to UTF32 first. */
if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) {
/* If the 16 bits following the high surrogate are in the source buffer... */
if (source < sourceEnd) {
ch2 = *source;
/* If it's a low surrogate, convert to UTF32. */
if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) {
ch = ((ch - UNI_SUR_HIGH_START) << halfShift)
+ (ch2 - UNI_SUR_LOW_START) + halfBase;
++source;
} else if (flags == strictConversion) { /* it's an unpaired high surrogate */
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
} else { /* We don't have the 16 bits following the high surrogate. */
--source; /* return to the high surrogate */
result = sourceExhausted;
break;
}
} else if (flags == strictConversion) {
/* UTF-16 surrogate values are illegal in UTF-32 */
if (ch >= UNI_SUR_LOW_START && ch <= UNI_SUR_LOW_END) {
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
}
if (target >= targetEnd) {
source = oldSource; /* Back up source pointer! */
result = targetExhausted; break;
}
*target++ = ch;
}
*sourceStart = source;
*targetStart = target;
#ifdef CVTUTF_DEBUG
if (result == sourceIllegal) {
fprintf(stderr, "ConvertUTF16toUTF32 illegal seq 0x%04x,%04x\n", ch, ch2);
fflush(stderr);
}
#endif
return result;
}
ConversionResult ConvertUTF16toUTF8 (
const UTF16** sourceStart, const UTF16* sourceEnd,
UTF8** targetStart, UTF8* targetEnd, ConversionFlags flags) {
ConversionResult result = conversionOK;
const UTF16* source = *sourceStart;
UTF8* target = *targetStart;
while (source < sourceEnd) {
UTF32 ch;
unsigned short bytesToWrite = 0;
const UTF32 byteMask = 0xBF;
const UTF32 byteMark = 0x80;
const UTF16* oldSource = source; /* In case we have to back up because of target overflow. */
ch = *source++;
/* If we have a surrogate pair, convert to UTF32 first. */
if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_HIGH_END) {
/* If the 16 bits following the high surrogate are in the source buffer... */
if (source < sourceEnd) {
UTF32 ch2 = *source;
/* If it's a low surrogate, convert to UTF32. */
if (ch2 >= UNI_SUR_LOW_START && ch2 <= UNI_SUR_LOW_END) {
ch = ((ch - UNI_SUR_HIGH_START) << halfShift)
+ (ch2 - UNI_SUR_LOW_START) + halfBase;
++source;
} else if (flags == strictConversion) { /* it's an unpaired high surrogate */
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
} else { /* We don't have the 16 bits following the high surrogate. */
--source; /* return to the high surrogate */
result = sourceExhausted;
break;
}
} else if (flags == strictConversion) {
/* UTF-16 surrogate values are illegal in UTF-32 */
if (ch >= UNI_SUR_LOW_START && ch <= UNI_SUR_LOW_END) {
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
}
/* Figure out how many bytes the result will require */
if (ch < (UTF32)0x80) { bytesToWrite = 1;
} else if (ch < (UTF32)0x800) { bytesToWrite = 2;
} else if (ch < (UTF32)0x10000) { bytesToWrite = 3;
} else if (ch < (UTF32)0x110000) { bytesToWrite = 4;
} else { bytesToWrite = 3;
ch = UNI_REPLACEMENT_CHAR;
}
target += bytesToWrite;
if (target > targetEnd) {
source = oldSource; /* Back up source pointer! */
target -= bytesToWrite; result = targetExhausted; break;
}
switch (bytesToWrite) { /* note: everything falls through. */
case 4: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6;
case 3: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6;
case 2: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6;
case 1: *--target = (UTF8)(ch | firstByteMark[bytesToWrite]);
}
target += bytesToWrite;
}
*sourceStart = source;
*targetStart = target;
return result;
}
/* --------------------------------------------------------------------- */
ConversionResult ConvertUTF32toUTF8 (
const UTF32** sourceStart, const UTF32* sourceEnd,
UTF8** targetStart, UTF8* targetEnd, ConversionFlags flags) {
ConversionResult result = conversionOK;
const UTF32* source = *sourceStart;
UTF8* target = *targetStart;
while (source < sourceEnd) {
UTF32 ch;
unsigned short bytesToWrite = 0;
const UTF32 byteMask = 0xBF;
const UTF32 byteMark = 0x80;
ch = *source++;
if (flags == strictConversion ) {
/* UTF-16 surrogate values are illegal in UTF-32 */
if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END) {
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
}
/*
* Figure out how many bytes the result will require. Turn any
* illegally large UTF32 things (> Plane 17) into replacement chars.
*/
if (ch < (UTF32)0x80) { bytesToWrite = 1;
} else if (ch < (UTF32)0x800) { bytesToWrite = 2;
} else if (ch < (UTF32)0x10000) { bytesToWrite = 3;
} else if (ch <= UNI_MAX_LEGAL_UTF32) { bytesToWrite = 4;
} else { bytesToWrite = 3;
ch = UNI_REPLACEMENT_CHAR;
result = sourceIllegal;
}
target += bytesToWrite;
if (target > targetEnd) {
--source; /* Back up source pointer! */
target -= bytesToWrite; result = targetExhausted; break;
}
switch (bytesToWrite) { /* note: everything falls through. */
case 4: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6;
case 3: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6;
case 2: *--target = (UTF8)((ch | byteMark) & byteMask); ch >>= 6;
case 1: *--target = (UTF8) (ch | firstByteMark[bytesToWrite]);
}
target += bytesToWrite;
}
*sourceStart = source;
*targetStart = target;
return result;
}
/* --------------------------------------------------------------------- */
/*
* Utility routine to tell whether a sequence of bytes is legal UTF-8.
* This must be called with the length pre-determined by the first byte.
* If not calling this from ConvertUTF8to*, then the length can be set by:
* length = trailingBytesForUTF8[*source]+1;
* and the sequence is illegal right away if there aren't that many bytes
* available.
* If presented with a length > 4, this returns false. The Unicode
* definition of UTF-8 goes up to 4-byte sequences.
*/
static Boolean isLegalUTF8(const UTF8 *source, int length) {
UTF8 a;
const UTF8 *srcptr = source+length;
switch (length) {
default: return false;
/* Everything else falls through when "true"... */
case 4: if ((a = (*--srcptr)) < 0x80 || a > 0xBF) return false;
case 3: if ((a = (*--srcptr)) < 0x80 || a > 0xBF) return false;
case 2: if ((a = (*--srcptr)) < 0x80 || a > 0xBF) return false;
switch (*source) {
/* no fall-through in this inner switch */
case 0xE0: if (a < 0xA0) return false; break;
case 0xED: if (a > 0x9F) return false; break;
case 0xF0: if (a < 0x90) return false; break;
case 0xF4: if (a > 0x8F) return false; break;
default: if (a < 0x80) return false;
}
case 1: if (*source >= 0x80 && *source < 0xC2) return false;
}
if (*source > 0xF4) return false;
return true;
}
/* --------------------------------------------------------------------- */
/*
* Exported function to return whether a UTF-8 sequence is legal or not.
* This is not used here; it's just exported.
*/
Boolean isLegalUTF8Sequence(const UTF8 *source, const UTF8 *sourceEnd) {
int length = trailingBytesForUTF8[*source]+1;
if (length > sourceEnd - source) {
return false;
}
return isLegalUTF8(source, length);
}
/* --------------------------------------------------------------------- */
static unsigned
findMaximalSubpartOfIllFormedUTF8Sequence(const UTF8 *source,
const UTF8 *sourceEnd) {
UTF8 b1, b2, b3;
assert(!isLegalUTF8Sequence(source, sourceEnd));
/*
* Unicode 6.3.0, D93b:
*
* Maximal subpart of an ill-formed subsequence: The longest code unit
* subsequence starting at an unconvertible offset that is either:
* a. the initial subsequence of a well-formed code unit sequence, or
* b. a subsequence of length one.
*/
if (source == sourceEnd)
return 0;
/*
* Perform case analysis. See Unicode 6.3.0, Table 3-7. Well-Formed UTF-8
* Byte Sequences.
*/
b1 = *source;
++source;
if (b1 >= 0xC2 && b1 <= 0xDF) {
/*
* First byte is valid, but we know that this code unit sequence is
* invalid, so the maximal subpart has to end after the first byte.
*/
return 1;
}
if (source == sourceEnd)
return 1;
b2 = *source;
++source;
if (b1 == 0xE0) {
return (b2 >= 0xA0 && b2 <= 0xBF) ? 2 : 1;
}
if (b1 >= 0xE1 && b1 <= 0xEC) {
return (b2 >= 0x80 && b2 <= 0xBF) ? 2 : 1;
}
if (b1 == 0xED) {
return (b2 >= 0x80 && b2 <= 0x9F) ? 2 : 1;
}
if (b1 >= 0xEE && b1 <= 0xEF) {
return (b2 >= 0x80 && b2 <= 0xBF) ? 2 : 1;
}
if (b1 == 0xF0) {
if (b2 >= 0x90 && b2 <= 0xBF) {
if (source == sourceEnd)
return 2;
b3 = *source;
return (b3 >= 0x80 && b3 <= 0xBF) ? 3 : 2;
}
return 1;
}
if (b1 >= 0xF1 && b1 <= 0xF3) {
if (b2 >= 0x80 && b2 <= 0xBF) {
if (source == sourceEnd)
return 2;
b3 = *source;
return (b3 >= 0x80 && b3 <= 0xBF) ? 3 : 2;
}
return 1;
}
if (b1 == 0xF4) {
if (b2 >= 0x80 && b2 <= 0x8F) {
if (source == sourceEnd)
return 2;
b3 = *source;
return (b3 >= 0x80 && b3 <= 0xBF) ? 3 : 2;
}
return 1;
}
assert((b1 >= 0x80 && b1 <= 0xC1) || b1 >= 0xF5);
/*
* There are no valid sequences that start with these bytes. Maximal subpart
* is defined to have length 1 in these cases.
*/
return 1;
}
/* --------------------------------------------------------------------- */
/*
* Exported function to return the total number of bytes in a codepoint
* represented in UTF-8, given the value of the first byte.
*/
unsigned getNumBytesForUTF8(UTF8 first) {
return trailingBytesForUTF8[first] + 1;
}
/* --------------------------------------------------------------------- */
/*
* Exported function to return whether a UTF-8 string is legal or not.
* This is not used here; it's just exported.
*/
Boolean isLegalUTF8String(const UTF8 **source, const UTF8 *sourceEnd) {
while (*source != sourceEnd) {
int length = trailingBytesForUTF8[**source] + 1;
if (length > sourceEnd - *source || !isLegalUTF8(*source, length))
return false;
*source += length;
}
return true;
}
/* --------------------------------------------------------------------- */
ConversionResult ConvertUTF8toUTF16 (
const UTF8** sourceStart, const UTF8* sourceEnd,
UTF16** targetStart, UTF16* targetEnd, ConversionFlags flags) {
ConversionResult result = conversionOK;
const UTF8* source = *sourceStart;
UTF16* target = *targetStart;
while (source < sourceEnd) {
UTF32 ch = 0;
unsigned short extraBytesToRead = trailingBytesForUTF8[*source];
if (extraBytesToRead >= sourceEnd - source) {
result = sourceExhausted; break;
}
/* Do this check whether lenient or strict */
if (!isLegalUTF8(source, extraBytesToRead+1)) {
result = sourceIllegal;
break;
}
/*
* The cases all fall through. See "Note A" below.
*/
switch (extraBytesToRead) {
case 5: ch += *source++; ch <<= 6; /* remember, illegal UTF-8 */
case 4: ch += *source++; ch <<= 6; /* remember, illegal UTF-8 */
case 3: ch += *source++; ch <<= 6;
case 2: ch += *source++; ch <<= 6;
case 1: ch += *source++; ch <<= 6;
case 0: ch += *source++;
}
ch -= offsetsFromUTF8[extraBytesToRead];
if (target >= targetEnd) {
source -= (extraBytesToRead+1); /* Back up source pointer! */
result = targetExhausted; break;
}
if (ch <= UNI_MAX_BMP) { /* Target is a character <= 0xFFFF */
/* UTF-16 surrogate values are illegal in UTF-32 */
if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END) {
if (flags == strictConversion) {
source -= (extraBytesToRead+1); /* return to the illegal value itself */
result = sourceIllegal;
break;
} else {
*target++ = UNI_REPLACEMENT_CHAR;
}
} else {
*target++ = (UTF16)ch; /* normal case */
}
} else if (ch > UNI_MAX_UTF16) {
if (flags == strictConversion) {
result = sourceIllegal;
source -= (extraBytesToRead+1); /* return to the start */
break; /* Bail out; shouldn't continue */
} else {
*target++ = UNI_REPLACEMENT_CHAR;
}
} else {
/* target is a character in range 0xFFFF - 0x10FFFF. */
if (target + 1 >= targetEnd) {
source -= (extraBytesToRead+1); /* Back up source pointer! */
result = targetExhausted; break;
}
ch -= halfBase;
*target++ = (UTF16)((ch >> halfShift) + UNI_SUR_HIGH_START);
*target++ = (UTF16)((ch & halfMask) + UNI_SUR_LOW_START);
}
}
*sourceStart = source;
*targetStart = target;
return result;
}
/* --------------------------------------------------------------------- */
static ConversionResult ConvertUTF8toUTF32Impl(
const UTF8** sourceStart, const UTF8* sourceEnd,
UTF32** targetStart, UTF32* targetEnd, ConversionFlags flags,
Boolean InputIsPartial) {
ConversionResult result = conversionOK;
const UTF8* source = *sourceStart;
UTF32* target = *targetStart;
while (source < sourceEnd) {
UTF32 ch = 0;
unsigned short extraBytesToRead = trailingBytesForUTF8[*source];
if (extraBytesToRead >= sourceEnd - source) {
if (flags == strictConversion || InputIsPartial) {
result = sourceExhausted;
break;
} else {
result = sourceIllegal;
/*
* Replace the maximal subpart of ill-formed sequence with
* replacement character.
*/
source += findMaximalSubpartOfIllFormedUTF8Sequence(source,
sourceEnd);
*target++ = UNI_REPLACEMENT_CHAR;
continue;
}
}
if (target >= targetEnd) {
result = targetExhausted; break;
}
/* Do this check whether lenient or strict */
if (!isLegalUTF8(source, extraBytesToRead+1)) {
result = sourceIllegal;
if (flags == strictConversion) {
/* Abort conversion. */
break;
} else {
/*
* Replace the maximal subpart of ill-formed sequence with
* replacement character.
*/
source += findMaximalSubpartOfIllFormedUTF8Sequence(source,
sourceEnd);
*target++ = UNI_REPLACEMENT_CHAR;
continue;
}
}
/*
* The cases all fall through. See "Note A" below.
*/
switch (extraBytesToRead) {
case 5: ch += *source++; ch <<= 6;
case 4: ch += *source++; ch <<= 6;
case 3: ch += *source++; ch <<= 6;
case 2: ch += *source++; ch <<= 6;
case 1: ch += *source++; ch <<= 6;
case 0: ch += *source++;
}
ch -= offsetsFromUTF8[extraBytesToRead];
if (ch <= UNI_MAX_LEGAL_UTF32) {
/*
* UTF-16 surrogate values are illegal in UTF-32, and anything
* over Plane 17 (> 0x10FFFF) is illegal.
*/
if (ch >= UNI_SUR_HIGH_START && ch <= UNI_SUR_LOW_END) {
if (flags == strictConversion) {
source -= (extraBytesToRead+1); /* return to the illegal value itself */
result = sourceIllegal;
break;
} else {
*target++ = UNI_REPLACEMENT_CHAR;
}
} else {
*target++ = ch;
}
} else { /* i.e., ch > UNI_MAX_LEGAL_UTF32 */
result = sourceIllegal;
*target++ = UNI_REPLACEMENT_CHAR;
}
}
*sourceStart = source;
*targetStart = target;
return result;
}
ConversionResult ConvertUTF8toUTF32Partial(const UTF8 **sourceStart,
const UTF8 *sourceEnd,
UTF32 **targetStart,
UTF32 *targetEnd,
ConversionFlags flags) {
return ConvertUTF8toUTF32Impl(sourceStart, sourceEnd, targetStart, targetEnd,
flags, /*InputIsPartial=*/true);
}
ConversionResult ConvertUTF8toUTF32(const UTF8 **sourceStart,
const UTF8 *sourceEnd, UTF32 **targetStart,
UTF32 *targetEnd, ConversionFlags flags) {
return ConvertUTF8toUTF32Impl(sourceStart, sourceEnd, targetStart, targetEnd,
flags, /*InputIsPartial=*/false);
}
/* ---------------------------------------------------------------------
Note A.
The fall-through switches in UTF-8 reading code save a
temp variable, some decrements & conditionals. The switches
are equivalent to the following loop:
{
int tmpBytesToRead = extraBytesToRead+1;
do {
ch += *source++;
--tmpBytesToRead;
if (tmpBytesToRead) ch <<= 6;
} while (tmpBytesToRead > 0);
}
In UTF-8 writing code, the switches on "bytesToWrite" are
similarly unrolled loops.
--------------------------------------------------------------------- */
} // namespace llvm
ConvertUTF_RESTORE_WARNINGS