// SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2018 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de * */ #include <common.h> #include <dm.h> #include <errno.h> #include <fsl_pmic.h> #include <i2c.h> #include <power/pmic.h> DECLARE_GLOBAL_DATA_PTR; static int mc34708_reg_count(struct udevice *dev) { return PMIC_NUM_OF_REGS; } static int mc34708_write(struct udevice *dev, uint reg, const u8 *buff, int len) { u8 buf[3] = { 0 }; int ret; if (len != MC34708_TRANSFER_SIZE) return -EINVAL; /* * The MC34708 sends data with big endian format, hence we need to * perform manual byte swap. */ buf[0] = buff[2]; buf[1] = buff[1]; buf[2] = buff[0]; ret = dm_i2c_write(dev, reg, buf, len); if (ret) printf("write error to device: %p register: %#x!", dev, reg); return ret; } static int mc34708_read(struct udevice *dev, uint reg, u8 *buff, int len) { u8 buf[3] = { 0 }; int ret; if (len != MC34708_TRANSFER_SIZE) return -EINVAL; ret = dm_i2c_read(dev, reg, buf, len); if (ret) printf("read error from device: %p register: %#x!", dev, reg); buff[0] = buf[2]; buff[1] = buf[1]; buff[2] = buf[0]; return ret; } static int mc34708_probe(struct udevice *dev) { struct uc_pmic_priv *priv = dev_get_uclass_priv(dev); priv->trans_len = MC34708_TRANSFER_SIZE; /* * Handle PMIC Errata 37: APS mode not fully functional, * use explicit PWM or PFM instead */ pmic_clrsetbits(dev, MC34708_REG_SW12_OPMODE, MC34708_SW1AMODE_MASK | MC34708_SW2MODE_MASK, SW_MODE_PWMPWM | (SW_MODE_PWMPWM << 14u)); pmic_clrsetbits(dev, MC34708_REG_SW345_OPMODE, MC34708_SW3MODE_MASK | MC34708_SW4AMODE_MASK | MC34708_SW4BMODE_MASK | MC34708_SW5MODE_MASK, SW_MODE_PWMPWM | (SW_MODE_PWMPWM << 6u) | (SW_MODE_PWMPWM << 12u) | (SW_MODE_PWMPWM << 18u)); return 0; } static struct dm_pmic_ops mc34708_ops = { .reg_count = mc34708_reg_count, .read = mc34708_read, .write = mc34708_write, }; static const struct udevice_id mc34708_ids[] = { { .compatible = "fsl,mc34708" }, { } }; U_BOOT_DRIVER(pmic_mc34708) = { .name = "mc34708_pmic", .id = UCLASS_PMIC, .of_match = mc34708_ids, .probe = mc34708_probe, .ops = &mc34708_ops, };