/** @file
*
* Copyright (c) 2011-2015, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
* which accompanies this distribution. The full text of the license may be found at
* http://opensource.org/licenses/bsd-license.php
*
* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
*
**/
#include "SataSiI3132.h"
#include <IndustryStandard/Atapi.h>
#include <Library/DevicePathLib.h>
SATA_SI3132_DEVICE*
GetSataDevice (
IN SATA_SI3132_INSTANCE* SataInstance,
IN UINT16 Port,
IN UINT16 PortMultiplierPort
) {
LIST_ENTRY *List;
SATA_SI3132_PORT *SataPort;
SATA_SI3132_DEVICE *SataDevice;
if (Port >= SATA_SII3132_MAXPORT) {
return NULL;
}
SataPort = &(SataInstance->Ports[Port]);
List = SataPort->Devices.ForwardLink;
while (List != &SataPort->Devices) {
SataDevice = (SATA_SI3132_DEVICE*)List;
if (SataDevice->Index == PortMultiplierPort) {
return SataDevice;
}
List = List->ForwardLink;
}
return NULL;
}
EFI_STATUS
SiI3132AtaPassThruCommand (
IN SATA_SI3132_INSTANCE *SataSiI3132Instance,
IN SATA_SI3132_PORT *SataPort,
IN UINT16 PortMultiplierPort,
IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,
IN EFI_EVENT Event OPTIONAL
)
{
SATA_SI3132_DEVICE *SataDevice;
EFI_PHYSICAL_ADDRESS PhysInDataBuffer;
UINTN InDataBufferLength = 0;
EFI_PHYSICAL_ADDRESS PhysOutDataBuffer;
UINTN OutDataBufferLength;
CONST UINTN EmptySlot = 0;
UINTN Control = PRB_CTRL_ATA;
UINTN Protocol = 0;
UINT32 Value32, Error, Timeout = 0;
CONST UINT32 IrqMask = (SII3132_PORT_INT_CMDCOMPL | SII3132_PORT_INT_CMDERR) << 16;
EFI_STATUS Status;
VOID* PciAllocMapping = NULL;
EFI_PCI_IO_PROTOCOL *PciIo;
PciIo = SataSiI3132Instance->PciIo;
ZeroMem (SataPort->HostPRB, sizeof (SATA_SI3132_PRB));
// Construct Si3132 PRB
switch (Packet->Protocol) {
case EFI_ATA_PASS_THRU_PROTOCOL_ATA_HARDWARE_RESET:
ASSERT (0); //TODO: Implement me!
break;
case EFI_ATA_PASS_THRU_PROTOCOL_ATA_SOFTWARE_RESET:
SATA_TRACE ("SiI3132AtaPassThru() EFI_ATA_PASS_THRU_PROTOCOL_ATA_SOFTWARE_RESET");
Control = PRB_CTRL_SRST;
if (FeaturePcdGet (PcdSataSiI3132FeaturePMPSupport)) {
SataPort->HostPRB->Fis.Control = 0x0F;
}
break;
case EFI_ATA_PASS_THRU_PROTOCOL_ATA_NON_DATA:
ASSERT (0); //TODO: Implement me!
break;
// There is no difference for SiI3132 between PIO and DMA invokation
case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_IN:
case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_IN:
// Fixup the size for block transfer. Following UEFI Specification, 'InTransferLength' should
// be in number of bytes. But for most data transfer commands, the value is in number of blocks
if (Packet->Acb->AtaCommand == ATA_CMD_IDENTIFY_DRIVE) {
InDataBufferLength = Packet->InTransferLength;
} else {
SataDevice = GetSataDevice (SataSiI3132Instance, SataPort->Index, PortMultiplierPort);
if (!SataDevice || (SataDevice->BlockSize == 0)) {
return EFI_INVALID_PARAMETER;
}
InDataBufferLength = Packet->InTransferLength * SataDevice->BlockSize;
}
Status = PciIo->Map (
PciIo, EfiPciIoOperationBusMasterRead,
Packet->InDataBuffer, &InDataBufferLength, &PhysInDataBuffer, &PciAllocMapping
);
if (EFI_ERROR (Status)) {
return Status;
}
// Construct SGEs (32-bit system)
SataPort->HostPRB->Sge[0].DataAddressLow = (UINT32)PhysInDataBuffer;
SataPort->HostPRB->Sge[0].DataAddressHigh = (UINT32)(PhysInDataBuffer >> 32);
SataPort->HostPRB->Sge[0].Attributes = SGE_TRM; // Only one SGE
SataPort->HostPRB->Sge[0].DataCount = InDataBufferLength;
// Copy the Ata Command Block
CopyMem (&SataPort->HostPRB->Fis, Packet->Acb, sizeof (EFI_ATA_COMMAND_BLOCK));
// Fixup the FIS
SataPort->HostPRB->Fis.FisType = 0x27; // Register - Host to Device FIS
SataPort->HostPRB->Fis.Control = 1 << 7; // Is a command
if (FeaturePcdGet (PcdSataSiI3132FeaturePMPSupport)) {
SataPort->HostPRB->Fis.Control |= PortMultiplierPort & 0xFF;
}
break;
case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_OUT:
case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_OUT:
SataDevice = GetSataDevice (SataSiI3132Instance, SataPort->Index, PortMultiplierPort);
if (!SataDevice || (SataDevice->BlockSize == 0)) {
return EFI_INVALID_PARAMETER;
}
// Fixup the size for block transfer. Following UEFI Specification, 'InTransferLength' should
// be in number of bytes. But for most data transfer commands, the value is in number of blocks
OutDataBufferLength = Packet->OutTransferLength * SataDevice->BlockSize;
Status = PciIo->Map (
PciIo, EfiPciIoOperationBusMasterWrite,
Packet->OutDataBuffer, &OutDataBufferLength, &PhysOutDataBuffer, &PciAllocMapping
);
if (EFI_ERROR (Status)) {
return Status;
}
// Construct SGEs (32-bit system)
SataPort->HostPRB->Sge[0].DataAddressLow = (UINT32)PhysOutDataBuffer;
SataPort->HostPRB->Sge[0].DataAddressHigh = (UINT32)(PhysOutDataBuffer >> 32);
SataPort->HostPRB->Sge[0].Attributes = SGE_TRM; // Only one SGE
SataPort->HostPRB->Sge[0].DataCount = OutDataBufferLength;
// Copy the Ata Command Block
CopyMem (&SataPort->HostPRB->Fis, Packet->Acb, sizeof (EFI_ATA_COMMAND_BLOCK));
// Fixup the FIS
SataPort->HostPRB->Fis.FisType = 0x27; // Register - Host to Device FIS
SataPort->HostPRB->Fis.Control = 1 << 7; // Is a command
if (FeaturePcdGet (PcdSataSiI3132FeaturePMPSupport)) {
SataPort->HostPRB->Fis.Control |= PortMultiplierPort & 0xFF;
}
break;
case EFI_ATA_PASS_THRU_PROTOCOL_DMA:
ASSERT (0); //TODO: Implement me!
break;
case EFI_ATA_PASS_THRU_PROTOCOL_DMA_QUEUED:
ASSERT (0); //TODO: Implement me!
break;
case EFI_ATA_PASS_THRU_PROTOCOL_DEVICE_DIAGNOSTIC:
ASSERT (0); //TODO: Implement me!
break;
case EFI_ATA_PASS_THRU_PROTOCOL_DEVICE_RESET:
ASSERT (0); //TODO: Implement me!
break;
case EFI_ATA_PASS_THRU_PROTOCOL_FPDMA:
ASSERT (0); //TODO: Implement me!
break;
case EFI_ATA_PASS_THRU_PROTOCOL_RETURN_RESPONSE:
ASSERT (0); //TODO: Implement me!
break;
default:
ASSERT (0);
break;
}
SataPort->HostPRB->Control = Control;
SataPort->HostPRB->ProtocolOverride = Protocol;
// Clear IRQ
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, IrqMask);
if (!FeaturePcdGet (PcdSataSiI3132FeatureDirectCommandIssuing)) {
// Indirect Command Issuance
//TODO: Find which slot is free (maybe use the Cmd FIFO)
//SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_CMDEXECFIFO_REG, &EmptySlot);
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_CMDACTIV_REG + (EmptySlot * 8),
(UINT32)(SataPort->PhysAddrHostPRB & 0xFFFFFFFF));
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_CMDACTIV_REG + (EmptySlot * 8) + 4,
(UINT32)((SataPort->PhysAddrHostPRB >> 32) & 0xFFFFFFFF));
} else {
// Direct Command Issuance
Status = PciIo->Mem.Write (PciIo, EfiPciIoWidthUint32, 1, // Bar 1
SataPort->RegBase + (EmptySlot * 0x80),
sizeof (SATA_SI3132_PRB) / 4,
SataPort->HostPRB);
ASSERT_EFI_ERROR (Status);
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_CMDEXECFIFO_REG, EmptySlot);
}
#if 0
// Could need to be implemented if we run multiple command in parallel to know which slot has been completed
SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_SLOTSTATUS_REG, &Value32);
Timeout = Packet->Timeout;
while (!Timeout && !Value32) {
gBS->Stall (1);
SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_SLOTSTATUS_REG, &Value32);
Timeout--;
}
#else
SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, &Value32);
if (!Packet->Timeout) {
while (!(Value32 & IrqMask)) {
gBS->Stall (1);
SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, &Value32);
}
} else {
Timeout = Packet->Timeout;
while (Timeout && !(Value32 & IrqMask)) {
gBS->Stall (1);
SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, &Value32);
Timeout--;
}
}
#endif
// Fill Packet Ata Status Block
Status = PciIo->Mem.Read (PciIo, EfiPciIoWidthUint32, 1, // Bar 1
SataPort->RegBase + 0x08,
sizeof (EFI_ATA_STATUS_BLOCK) / 4,
Packet->Asb);
ASSERT_EFI_ERROR (Status);
if ((Packet->Timeout != 0) && (Timeout == 0)) {
DEBUG ((EFI_D_ERROR, "SiI3132AtaPassThru() Err:Timeout\n"));
//ASSERT (0);
return EFI_TIMEOUT;
} else if (Value32 & (SII3132_PORT_INT_CMDERR << 16)) {
SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_CMDERROR_REG, &Error);
DEBUG ((EFI_D_ERROR, "SiI3132AtaPassThru() CmdErr:0x%X (SiI3132 Err:0x%X)\n", Value32, Error));
ASSERT (0);
return EFI_DEVICE_ERROR;
} else if (Value32 & (SII3132_PORT_INT_CMDCOMPL << 16)) {
// Clear Command Complete
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, SII3132_PORT_INT_CMDCOMPL << 16);
if (PciAllocMapping) {
Status = PciIo->Unmap (PciIo, PciAllocMapping);
ASSERT (!EFI_ERROR (Status));
}
// If the command was ATA_CMD_IDENTIFY_DRIVE then we need to update the BlockSize
if (Packet->Acb->AtaCommand == ATA_CMD_IDENTIFY_DRIVE) {
ATA_IDENTIFY_DATA *IdentifyData = (ATA_IDENTIFY_DATA*)Packet->InDataBuffer;
// Get the corresponding Block Device
SataDevice = GetSataDevice (SataSiI3132Instance, SataPort->Index, PortMultiplierPort);
// Check logical block size
if ((IdentifyData->phy_logic_sector_support & BIT12) != 0) {
ASSERT (SataDevice != NULL);
SataDevice->BlockSize = (UINT32) (((IdentifyData->logic_sector_size_hi << 16) |
IdentifyData->logic_sector_size_lo) * sizeof (UINT16));
} else {
SataDevice->BlockSize = 0x200;
}
}
return EFI_SUCCESS;
} else {
ASSERT (0);
return EFI_DEVICE_ERROR;
}
}
/**
Sends an ATA command to an ATA device that is attached to the ATA controller. This function
supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required,
and the non-blocking I/O functionality is optional.
@param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
@param[in] Port The port number of the ATA device to send the command.
@param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.
If there is no port multiplier, then specify 0.
@param[in,out] Packet A pointer to the ATA command to send to the ATA device specified by Port
and PortMultiplierPort.
@param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking
I/O is performed. If Event is NULL, then blocking I/O is performed. If
Event is not NULL and non blocking I/O is supported, then non-blocking
I/O is performed, and Event will be signaled when the ATA command completes.
@retval EFI_SUCCESS The ATA command was sent by the host. For bi-directional commands,
InTransferLength bytes were transferred from InDataBuffer. For write and
bi-directional commands, OutTransferLength bytes were transferred by OutDataBuffer.
@retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number of bytes that could be transferred
is returned in InTransferLength. For write and bi-directional commands,
OutTransferLength bytes were transferred by OutDataBuffer.
@retval EFI_NOT_READY The ATA command could not be sent because there are too many ATA commands
already queued. The caller may retry again later.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send the ATA command.
@retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents of Acb are invalid. The ATA
command was not sent, so no additional status information is available.
**/
EFI_STATUS
SiI3132AtaPassThru (
IN EFI_ATA_PASS_THRU_PROTOCOL *This,
IN UINT16 Port,
IN UINT16 PortMultiplierPort,
IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,
IN EFI_EVENT Event OPTIONAL
)
{
SATA_SI3132_INSTANCE *SataSiI3132Instance;
SATA_SI3132_DEVICE *SataDevice;
SATA_SI3132_PORT *SataPort;
SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);
if (!SataSiI3132Instance) {
return EFI_INVALID_PARAMETER;
}
SataDevice = GetSataDevice (SataSiI3132Instance, Port, PortMultiplierPort);
if (!SataDevice) {
return EFI_INVALID_PARAMETER;
}
SataPort = SataDevice->Port;
DEBUG ((EFI_D_INFO, "SiI3132AtaPassThru(%d,%d) : AtaCmd:0x%X Prot:%d\n", Port, PortMultiplierPort,
Packet->Acb->AtaCommand, Packet->Protocol));
return SiI3132AtaPassThruCommand (SataSiI3132Instance, SataPort, PortMultiplierPort, Packet, Event);
}
/**
Used to retrieve the list of legal port numbers for ATA devices on an ATA controller.
These can either be the list of ports where ATA devices are actually present or the
list of legal port numbers for the ATA controller. Regardless, the caller of this
function must probe the port number returned to see if an ATA device is actually
present at that location on the ATA controller.
The GetNextPort() function retrieves the port number on an ATA controller. If on input
Port is 0xFFFF, then the port number of the first port on the ATA controller is returned
in Port and EFI_SUCCESS is returned.
If Port is a port number that was returned on a previous call to GetNextPort(), then the
port number of the next port on the ATA controller is returned in Port, and EFI_SUCCESS
is returned. If Port is not 0xFFFF and Port was not returned on a previous call to
GetNextPort(), then EFI_INVALID_PARAMETER is returned.
If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND is
returned.
@param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
@param[in,out] Port On input, a pointer to the port number on the ATA controller.
On output, a pointer to the next port number on the ATA
controller. An input value of 0xFFFF retrieves the first port
number on the ATA controller.
@retval EFI_SUCCESS The next port number on the ATA controller was returned in Port.
@retval EFI_NOT_FOUND There are no more ports on this ATA controller.
@retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned on a previous call
to GetNextPort().
**/
EFI_STATUS
SiI3132GetNextPort (
IN EFI_ATA_PASS_THRU_PROTOCOL *This,
IN OUT UINT16 *Port
)
{
SATA_SI3132_INSTANCE *SataSiI3132Instance;
UINTN PrevPort;
EFI_STATUS Status = EFI_SUCCESS;
SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);
if (!SataSiI3132Instance) {
return EFI_INVALID_PARAMETER;
}
PrevPort = *Port;
if (PrevPort == 0xFFFF) {
*Port = 0;
} else {
if (PrevPort < SATA_SII3132_MAXPORT) {
*Port = PrevPort + 1;
} else {
Status = EFI_NOT_FOUND;
}
}
return Status;
}
/**
Used to retrieve the list of legal port multiplier port numbers for ATA devices on a port of an ATA
controller. These can either be the list of port multiplier ports where ATA devices are actually
present on port or the list of legal port multiplier ports on that port. Regardless, the caller of this
function must probe the port number and port multiplier port number returned to see if an ATA
device is actually present.
The GetNextDevice() function retrieves the port multiplier port number of an ATA device
present on a port of an ATA controller.
If PortMultiplierPort points to a port multiplier port number value that was returned on a
previous call to GetNextDevice(), then the port multiplier port number of the next ATA device
on the port of the ATA controller is returned in PortMultiplierPort, and EFI_SUCCESS is
returned.
If PortMultiplierPort points to 0xFFFF, then the port multiplier port number of the first
ATA device on port of the ATA controller is returned in PortMultiplierPort and
EFI_SUCCESS is returned.
If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort
was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER
is returned.
If PortMultiplierPort is the port multiplier port number of the last ATA device on the port of
the ATA controller, then EFI_NOT_FOUND is returned.
@param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
@param[in] Port The port number present on the ATA controller.
@param[in,out] PortMultiplierPort On input, a pointer to the port multiplier port number of an
ATA device present on the ATA controller.
If on input a PortMultiplierPort of 0xFFFF is specified,
then the port multiplier port number of the first ATA device
is returned. On output, a pointer to the port multiplier port
number of the next ATA device present on an ATA controller.
@retval EFI_SUCCESS The port multiplier port number of the next ATA device on the port
of the ATA controller was returned in PortMultiplierPort.
@retval EFI_NOT_FOUND There are no more ATA devices on this port of the ATA controller.
@retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort was not
returned on a previous call to GetNextDevice().
**/
EFI_STATUS
SiI3132GetNextDevice (
IN EFI_ATA_PASS_THRU_PROTOCOL *This,
IN UINT16 Port,
IN OUT UINT16 *PortMultiplierPort
)
{
SATA_SI3132_INSTANCE *SataSiI3132Instance;
SATA_SI3132_PORT *SataPort;
SATA_SI3132_DEVICE *SataDevice;
LIST_ENTRY *List;
EFI_STATUS Status = EFI_SUCCESS;
SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);
if (!SataSiI3132Instance) {
return EFI_INVALID_PARAMETER;
}
if (Port >= SATA_SII3132_MAXPORT) {
return EFI_INVALID_PARAMETER;
}
SataPort = &(SataSiI3132Instance->Ports[Port]);
if (*PortMultiplierPort == 0xFFFF) {
List = SataPort->Devices.ForwardLink;
if (List != &SataPort->Devices) {
// The list is not empty, return the first device
*PortMultiplierPort = ((SATA_SI3132_DEVICE*)List)->Index;
} else {
Status = EFI_NOT_FOUND;
}
} else {
SataDevice = GetSataDevice (SataSiI3132Instance, Port, *PortMultiplierPort);
if (SataDevice != NULL) {
// We have found the previous port multiplier, return the next one
List = SataDevice->Link.ForwardLink;
if (List != &SataPort->Devices) {
*PortMultiplierPort = ((SATA_SI3132_DEVICE*)List)->Index;
} else {
Status = EFI_NOT_FOUND;
}
} else {
Status = EFI_NOT_FOUND;
}
}
return Status;
}
/**
Used to allocate and build a device path node for an ATA device on an ATA controller.
The BuildDevicePath() function allocates and builds a single device node for the ATA
device specified by Port and PortMultiplierPort. If the ATA device specified by Port and
PortMultiplierPort is not present on the ATA controller, then EFI_NOT_FOUND is returned.
If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. If there are not enough
resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned.
Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
DevicePath are initialized to describe the ATA device specified by Port and PortMultiplierPort,
and EFI_SUCCESS is returned.
@param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
@param[in] Port Port specifies the port number of the ATA device for which a
device path node is to be allocated and built.
@param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a
device path node is to be allocated and built. If there is no
port multiplier, then specify 0.
@param[in,out] DevicePath A pointer to a single device path node that describes the ATA
device specified by Port and PortMultiplierPort. This function
is responsible for allocating the buffer DevicePath with the
boot service AllocatePool(). It is the caller's responsibility
to free DevicePath when the caller is finished with DevicePath.
@retval EFI_SUCCESS The device path node that describes the ATA device specified by
Port and PortMultiplierPort was allocated and returned in DevicePath.
@retval EFI_NOT_FOUND The ATA device specified by Port and PortMultiplierPort does not
exist on the ATA controller.
@retval EFI_INVALID_PARAMETER DevicePath is NULL.
@retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
**/
EFI_STATUS
SiI3132BuildDevicePath (
IN EFI_ATA_PASS_THRU_PROTOCOL *This,
IN UINT16 Port,
IN UINT16 PortMultiplierPort,
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
)
{
SATA_SI3132_INSTANCE *SataSiI3132Instance;
SATA_SI3132_DEVICE *SataDevice;
EFI_DEVICE_PATH_PROTOCOL *SiI3132DevicePath;
SATA_TRACE ("SiI3132BuildDevicePath()");
SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);
if (!SataSiI3132Instance) {
return EFI_INVALID_PARAMETER;
}
SataDevice = GetSataDevice (SataSiI3132Instance, Port, PortMultiplierPort);
if (SataDevice == NULL) {
return EFI_NOT_FOUND;
}
SiI3132DevicePath = CreateDeviceNode (MESSAGING_DEVICE_PATH, MSG_SATA_DP, sizeof (SATA_DEVICE_PATH));
if (SiI3132DevicePath == NULL) {
return EFI_OUT_OF_RESOURCES;
}
((SATA_DEVICE_PATH*)SiI3132DevicePath)->HBAPortNumber = Port;
if (FeaturePcdGet (PcdSataSiI3132FeaturePMPSupport)) {
((SATA_DEVICE_PATH*)SiI3132DevicePath)->PortMultiplierPortNumber = PortMultiplierPort;
} else {
//Temp:((SATA_DEVICE_PATH*)SiI3132DevicePath)->PortMultiplierPortNumber = SATA_HBA_DIRECT_CONNECT_FLAG;
((SATA_DEVICE_PATH*)SiI3132DevicePath)->PortMultiplierPortNumber = 0;
}
((SATA_DEVICE_PATH*)SiI3132DevicePath)->Lun = Port; //TODO: Search information how to define properly LUN (Logical Unit Number)
*DevicePath = SiI3132DevicePath;
return EFI_SUCCESS;
}
/**
Used to translate a device path node to a port number and port multiplier port number.
The GetDevice() function determines the port and port multiplier port number associated with
the ATA device described by DevicePath. If DevicePath is a device path node type that the
ATA Pass Thru driver supports, then the ATA Pass Thru driver will attempt to translate the contents
DevicePath into a port number and port multiplier port number.
If this translation is successful, then that port number and port multiplier port number are returned
in Port and PortMultiplierPort, and EFI_SUCCESS is returned.
If DevicePath, Port, or PortMultiplierPort are NULL, then EFI_INVALID_PARAMETER is returned.
If DevicePath is not a device path node type that the ATA Pass Thru driver supports, then
EFI_UNSUPPORTED is returned.
If DevicePath is a device path node type that the ATA Pass Thru driver supports, but there is not
a valid translation from DevicePath to a port number and port multiplier port number, then
EFI_NOT_FOUND is returned.
@param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
@param[in] DevicePath A pointer to the device path node that describes an ATA device on the
ATA controller.
@param[out] Port On return, points to the port number of an ATA device on the ATA controller.
@param[out] PortMultiplierPort On return, points to the port multiplier port number of an ATA device
on the ATA controller.
@retval EFI_SUCCESS DevicePath was successfully translated to a port number and port multiplier
port number, and they were returned in Port and PortMultiplierPort.
@retval EFI_INVALID_PARAMETER DevicePath is NULL.
@retval EFI_INVALID_PARAMETER Port is NULL.
@retval EFI_INVALID_PARAMETER PortMultiplierPort is NULL.
@retval EFI_UNSUPPORTED This driver does not support the device path node type in DevicePath.
@retval EFI_NOT_FOUND A valid translation from DevicePath to a port number and port multiplier
port number does not exist.
**/
EFI_STATUS
SiI3132GetDevice (
IN EFI_ATA_PASS_THRU_PROTOCOL *This,
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
OUT UINT16 *Port,
OUT UINT16 *PortMultiplierPort
)
{
SATA_SI3132_INSTANCE *SataSiI3132Instance;
SATA_TRACE ("SiI3132GetDevice()");
if (!DevicePath || !Port || !PortMultiplierPort) {
return EFI_INVALID_PARAMETER;
}
if ((DevicePath->Type != MESSAGING_DEVICE_PATH) || (DevicePath->SubType != MSG_SATA_DP)) {
return EFI_UNSUPPORTED;
}
SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);
if (!SataSiI3132Instance) {
return EFI_INVALID_PARAMETER;
}
if (((SATA_DEVICE_PATH*)DevicePath)->Lun >= SATA_SII3132_MAXPORT) {
return EFI_NOT_FOUND;
}
if (FeaturePcdGet (PcdSataSiI3132FeaturePMPSupport)) {
ASSERT (0); //TODO: Implement me!
return EFI_UNSUPPORTED;
} else {
*Port = ((SATA_DEVICE_PATH*)DevicePath)->Lun;
// Return the first Sata Sevice as there should be only one directly connected
*PortMultiplierPort = ((SATA_SI3132_DEVICE*)SataSiI3132Instance->Ports[*Port].Devices.ForwardLink)->Index;
return EFI_SUCCESS;
}
}
EFI_STATUS
SiI3132HwResetPort (
IN SATA_SI3132_PORT *SataPort
)
{
EFI_PCI_IO_PROTOCOL *PciIo;
UINT32 Value32;
UINTN Timeout;
SATA_TRACE ("SiI3132HwResetPort()");
PciIo = SataPort->Instance->PciIo;
// Clear Port Reset
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_CONTROLCLEAR_REG, SII3132_PORT_CONTROL_RESET);
SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_STATUS_REG, &Value32);
ASSERT (!(Value32 & SII3132_PORT_CONTROL_RESET));
// Initialize error counters
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_ERRCOUNTDECODE, 0);
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_ERRCOUNTCRC, 0);
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_ERRCOUNTHANDSHAKE, 0);
// Enable interrupts for command completion and command errors
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_ENABLEINT_REG, SII3132_PORT_INT_CMDCOMPL | SII3132_PORT_INT_CMDERR);
// Clear IRQ
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_ENABLEINT_REG, SII3132_PORT_INT_CMDCOMPL | SII3132_PORT_INT_CMDERR | SII3132_PORT_INT_PORTRDY | (1 << 3));
// Wait until Port Ready
SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, &Value32);
Timeout = 1000;
while ((Timeout > 0) && ((Value32 & SII3132_PORT_INT_PORTRDY) == 0)) {
gBS->Stall (1);
Timeout--;
SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, &Value32);
}
// Clear IRQ
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, SII3132_PORT_INT_PORTRDY);
if (Timeout == 0) {
SATA_TRACE ("SiI3132HwResetPort(): Timeout");
return EFI_TIMEOUT;
} else if ((Value32 & SII3132_PORT_INT_PORTRDY) == 0) {
SATA_TRACE ("SiI3132HwResetPort(): Port Not Ready");
return EFI_DEVICE_ERROR;
} else {
return EFI_SUCCESS;
}
}
/**
Resets a specific port on the ATA controller. This operation also resets all the ATA devices
connected to the port.
The ResetChannel() function resets an a specific port on an ATA controller. This operation
resets all the ATA devices connected to that port. If this ATA controller does not support
a reset port operation, then EFI_UNSUPPORTED is returned.
If a device error occurs while executing that port reset operation, then EFI_DEVICE_ERROR is
returned.
If a timeout occurs during the execution of the port reset operation, then EFI_TIMEOUT is returned.
If the port reset operation is completed, then EFI_SUCCESS is returned.
@param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
@param[in] Port The port number on the ATA controller.
@retval EFI_SUCCESS The ATA controller port was reset.
@retval EFI_UNSUPPORTED The ATA controller does not support a port reset operation.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA port.
@retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA port.
**/
EFI_STATUS
SiI3132ResetPort (
IN EFI_ATA_PASS_THRU_PROTOCOL *This,
IN UINT16 Port
)
{
SATA_SI3132_INSTANCE *SataSiI3132Instance;
SATA_SI3132_PORT *SataPort;
SATA_TRACE ("SiI3132ResetPort()");
SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);
if (!SataSiI3132Instance) {
return EFI_INVALID_PARAMETER;
}
if (Port >= SATA_SII3132_MAXPORT) {
return EFI_UNSUPPORTED;
}
SataPort = &(SataSiI3132Instance->Ports[Port]);
return SiI3132HwResetPort (SataPort);
}
/**
Resets an ATA device that is connected to an ATA controller.
The ResetDevice() function resets the ATA device specified by Port and PortMultiplierPort.
If this ATA controller does not support a device reset operation, then EFI_UNSUPPORTED is
returned.
If Port or PortMultiplierPort are not in a valid range for this ATA controller, then
EFI_INVALID_PARAMETER is returned.
If a device error occurs while executing that device reset operation, then EFI_DEVICE_ERROR
is returned.
If a timeout occurs during the execution of the device reset operation, then EFI_TIMEOUT is
returned.
If the device reset operation is completed, then EFI_SUCCESS is returned.
@param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.
@param[in] Port Port represents the port number of the ATA device to be reset.
@param[in] PortMultiplierPort The port multiplier port number of the ATA device to reset.
If there is no port multiplier, then specify 0.
@retval EFI_SUCCESS The ATA device specified by Port and PortMultiplierPort was reset.
@retval EFI_UNSUPPORTED The ATA controller does not support a device reset operation.
@retval EFI_INVALID_PARAMETER Port or PortMultiplierPort are invalid.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA device
specified by Port and PortMultiplierPort.
@retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA device
specified by Port and PortMultiplierPort.
**/
EFI_STATUS
SiI3132ResetDevice (
IN EFI_ATA_PASS_THRU_PROTOCOL *This,
IN UINT16 Port,
IN UINT16 PortMultiplierPort
)
{
EFI_PCI_IO_PROTOCOL *PciIo;
SATA_SI3132_INSTANCE *SataSiI3132Instance;
SATA_SI3132_PORT *SataPort;
SATA_SI3132_DEVICE *SataDevice;
UINTN Timeout;
UINT32 Value32;
SATA_TRACE ("SiI3132ResetDevice()");
SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);
if (!SataSiI3132Instance) {
return EFI_INVALID_PARAMETER;
}
PciIo = SataSiI3132Instance->PciIo;
SataDevice = GetSataDevice (SataSiI3132Instance, Port, PortMultiplierPort);
if (!SataDevice) {
return EFI_INVALID_PARAMETER;
}
SataPort = SataDevice->Port;
SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_CONTROLSET_REG, SII3132_PORT_DEVICE_RESET);
Timeout = 100;
SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_STATUS_REG, &Value32);
while ((Timeout > 0) && ((Value32 & SII3132_PORT_DEVICE_RESET) != 0)) {
gBS->Stall (1);
SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_STATUS_REG, &Value32);
Timeout--;
}
if (Timeout == 0) {
SATA_TRACE ("SiI3132ResetDevice(): Timeout");
return EFI_TIMEOUT;
} else {
return EFI_SUCCESS;
}
}