/* valid adjtimex test
* by: John Stultz <john.stultz@linaro.org>
* (C) Copyright Linaro 2015
* Licensed under the GPLv2
*
* This test validates adjtimex interface with valid
* and invalid test data.
*
* Usage: valid-adjtimex
*
* To build:
* $ gcc valid-adjtimex.c -o valid-adjtimex -lrt
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <sys/time.h>
#include <sys/timex.h>
#include <string.h>
#include <signal.h>
#include <unistd.h>
#include "../kselftest.h"
#define NSEC_PER_SEC 1000000000LL
#define USEC_PER_SEC 1000000LL
#define ADJ_SETOFFSET 0x0100
#ifndef __ANDROID__
#include <sys/syscall.h>
static int clock_adjtime(clockid_t id, struct timex *tx)
{
return syscall(__NR_clock_adjtime, id, tx);
}
#endif
/* clear NTP time_status & time_state */
int clear_time_state(void)
{
struct timex tx;
int ret;
tx.modes = ADJ_STATUS;
tx.status = 0;
ret = adjtimex(&tx);
return ret;
}
#define NUM_FREQ_VALID 32
#define NUM_FREQ_OUTOFRANGE 4
#define NUM_FREQ_INVALID 2
long valid_freq[NUM_FREQ_VALID] = {
-499<<16,
-450<<16,
-400<<16,
-350<<16,
-300<<16,
-250<<16,
-200<<16,
-150<<16,
-100<<16,
-75<<16,
-50<<16,
-25<<16,
-10<<16,
-5<<16,
-1<<16,
-1000,
1<<16,
5<<16,
10<<16,
25<<16,
50<<16,
75<<16,
100<<16,
150<<16,
200<<16,
250<<16,
300<<16,
350<<16,
400<<16,
450<<16,
499<<16,
};
long outofrange_freq[NUM_FREQ_OUTOFRANGE] = {
-1000<<16,
-550<<16,
550<<16,
1000<<16,
};
#define LONG_MAX (~0UL>>1)
#define LONG_MIN (-LONG_MAX - 1)
long invalid_freq[NUM_FREQ_INVALID] = {
LONG_MAX,
LONG_MIN,
};
int validate_freq(void)
{
struct timex tx;
int ret, pass = 0;
int i;
clear_time_state();
memset(&tx, 0, sizeof(struct timex));
/* Set the leap second insert flag */
printf("Testing ADJ_FREQ... ");
for (i = 0; i < NUM_FREQ_VALID; i++) {
tx.modes = ADJ_FREQUENCY;
tx.freq = valid_freq[i];
ret = adjtimex(&tx);
if (ret < 0) {
printf("[FAIL]\n");
printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
valid_freq[i], valid_freq[i]>>16);
pass = -1;
goto out;
}
tx.modes = 0;
ret = adjtimex(&tx);
if (tx.freq != valid_freq[i]) {
printf("Warning: freq value %ld not what we set it (%ld)!\n",
tx.freq, valid_freq[i]);
}
}
for (i = 0; i < NUM_FREQ_OUTOFRANGE; i++) {
tx.modes = ADJ_FREQUENCY;
tx.freq = outofrange_freq[i];
ret = adjtimex(&tx);
if (ret < 0) {
printf("[FAIL]\n");
printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
outofrange_freq[i], outofrange_freq[i]>>16);
pass = -1;
goto out;
}
tx.modes = 0;
ret = adjtimex(&tx);
if (tx.freq == outofrange_freq[i]) {
printf("[FAIL]\n");
printf("ERROR: out of range value %ld actually set!\n",
tx.freq);
pass = -1;
goto out;
}
}
if (sizeof(long) == 8) { /* this case only applies to 64bit systems */
for (i = 0; i < NUM_FREQ_INVALID; i++) {
tx.modes = ADJ_FREQUENCY;
tx.freq = invalid_freq[i];
ret = adjtimex(&tx);
if (ret >= 0) {
printf("[FAIL]\n");
printf("Error: No failure on invalid ADJ_FREQUENCY %ld\n",
invalid_freq[i]);
pass = -1;
goto out;
}
}
}
printf("[OK]\n");
out:
/* reset freq to zero */
tx.modes = ADJ_FREQUENCY;
tx.freq = 0;
ret = adjtimex(&tx);
return pass;
}
int set_offset(long long offset, int use_nano)
{
struct timex tmx = {};
int ret;
tmx.modes = ADJ_SETOFFSET;
if (use_nano) {
tmx.modes |= ADJ_NANO;
tmx.time.tv_sec = offset / NSEC_PER_SEC;
tmx.time.tv_usec = offset % NSEC_PER_SEC;
if (offset < 0 && tmx.time.tv_usec) {
tmx.time.tv_sec -= 1;
tmx.time.tv_usec += NSEC_PER_SEC;
}
} else {
tmx.time.tv_sec = offset / USEC_PER_SEC;
tmx.time.tv_usec = offset % USEC_PER_SEC;
if (offset < 0 && tmx.time.tv_usec) {
tmx.time.tv_sec -= 1;
tmx.time.tv_usec += USEC_PER_SEC;
}
}
ret = clock_adjtime(CLOCK_REALTIME, &tmx);
if (ret < 0) {
printf("(sec: %ld usec: %ld) ", tmx.time.tv_sec, tmx.time.tv_usec);
printf("[FAIL]\n");
return -1;
}
return 0;
}
int set_bad_offset(long sec, long usec, int use_nano)
{
struct timex tmx = {};
int ret;
tmx.modes = ADJ_SETOFFSET;
if (use_nano)
tmx.modes |= ADJ_NANO;
tmx.time.tv_sec = sec;
tmx.time.tv_usec = usec;
ret = clock_adjtime(CLOCK_REALTIME, &tmx);
if (ret >= 0) {
printf("Invalid (sec: %ld usec: %ld) did not fail! ", tmx.time.tv_sec, tmx.time.tv_usec);
printf("[FAIL]\n");
return -1;
}
return 0;
}
int validate_set_offset(void)
{
printf("Testing ADJ_SETOFFSET... ");
/* Test valid values */
if (set_offset(NSEC_PER_SEC - 1, 1))
return -1;
if (set_offset(-NSEC_PER_SEC + 1, 1))
return -1;
if (set_offset(-NSEC_PER_SEC - 1, 1))
return -1;
if (set_offset(5 * NSEC_PER_SEC, 1))
return -1;
if (set_offset(-5 * NSEC_PER_SEC, 1))
return -1;
if (set_offset(5 * NSEC_PER_SEC + NSEC_PER_SEC / 2, 1))
return -1;
if (set_offset(-5 * NSEC_PER_SEC - NSEC_PER_SEC / 2, 1))
return -1;
if (set_offset(USEC_PER_SEC - 1, 0))
return -1;
if (set_offset(-USEC_PER_SEC + 1, 0))
return -1;
if (set_offset(-USEC_PER_SEC - 1, 0))
return -1;
if (set_offset(5 * USEC_PER_SEC, 0))
return -1;
if (set_offset(-5 * USEC_PER_SEC, 0))
return -1;
if (set_offset(5 * USEC_PER_SEC + USEC_PER_SEC / 2, 0))
return -1;
if (set_offset(-5 * USEC_PER_SEC - USEC_PER_SEC / 2, 0))
return -1;
/* Test invalid values */
if (set_bad_offset(0, -1, 1))
return -1;
if (set_bad_offset(0, -1, 0))
return -1;
if (set_bad_offset(0, 2 * NSEC_PER_SEC, 1))
return -1;
if (set_bad_offset(0, 2 * USEC_PER_SEC, 0))
return -1;
if (set_bad_offset(0, NSEC_PER_SEC, 1))
return -1;
if (set_bad_offset(0, USEC_PER_SEC, 0))
return -1;
if (set_bad_offset(0, -NSEC_PER_SEC, 1))
return -1;
if (set_bad_offset(0, -USEC_PER_SEC, 0))
return -1;
printf("[OK]\n");
return 0;
}
int main(int argc, char **argv)
{
if (validate_freq())
return ksft_exit_fail();
if (validate_set_offset())
return ksft_exit_fail();
return ksft_exit_pass();
}