/*
* fsgsbase.c, an fsgsbase test
* Copyright (c) 2014-2016 Andy Lutomirski
* GPL v2
*/
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
#include <string.h>
#include <sys/syscall.h>
#include <unistd.h>
#include <err.h>
#include <sys/user.h>
#include <asm/prctl.h>
#include <sys/prctl.h>
#include <signal.h>
#include <limits.h>
#include <sys/ucontext.h>
#include <sched.h>
#include <linux/futex.h>
#include <pthread.h>
#include <asm/ldt.h>
#include <sys/mman.h>
#ifndef __x86_64__
# error This test is 64-bit only
#endif
static volatile sig_atomic_t want_segv;
static volatile unsigned long segv_addr;
static int nerrs;
static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *),
int flags)
{
struct sigaction sa;
memset(&sa, 0, sizeof(sa));
sa.sa_sigaction = handler;
sa.sa_flags = SA_SIGINFO | flags;
sigemptyset(&sa.sa_mask);
if (sigaction(sig, &sa, 0))
err(1, "sigaction");
}
static void clearhandler(int sig)
{
struct sigaction sa;
memset(&sa, 0, sizeof(sa));
sa.sa_handler = SIG_DFL;
sigemptyset(&sa.sa_mask);
if (sigaction(sig, &sa, 0))
err(1, "sigaction");
}
static void sigsegv(int sig, siginfo_t *si, void *ctx_void)
{
ucontext_t *ctx = (ucontext_t*)ctx_void;
if (!want_segv) {
clearhandler(SIGSEGV);
return; /* Crash cleanly. */
}
want_segv = false;
segv_addr = (unsigned long)si->si_addr;
ctx->uc_mcontext.gregs[REG_RIP] += 4; /* Skip the faulting mov */
}
enum which_base { FS, GS };
static unsigned long read_base(enum which_base which)
{
unsigned long offset;
/*
* Unless we have FSGSBASE, there's no direct way to do this from
* user mode. We can get at it indirectly using signals, though.
*/
want_segv = true;
offset = 0;
if (which == FS) {
/* Use a constant-length instruction here. */
asm volatile ("mov %%fs:(%%rcx), %%rax" : : "c" (offset) : "rax");
} else {
asm volatile ("mov %%gs:(%%rcx), %%rax" : : "c" (offset) : "rax");
}
if (!want_segv)
return segv_addr + offset;
/*
* If that didn't segfault, try the other end of the address space.
* Unless we get really unlucky and run into the vsyscall page, this
* is guaranteed to segfault.
*/
offset = (ULONG_MAX >> 1) + 1;
if (which == FS) {
asm volatile ("mov %%fs:(%%rcx), %%rax"
: : "c" (offset) : "rax");
} else {
asm volatile ("mov %%gs:(%%rcx), %%rax"
: : "c" (offset) : "rax");
}
if (!want_segv)
return segv_addr + offset;
abort();
}
static void check_gs_value(unsigned long value)
{
unsigned long base;
unsigned short sel;
printf("[RUN]\tARCH_SET_GS to 0x%lx\n", value);
if (syscall(SYS_arch_prctl, ARCH_SET_GS, value) != 0)
err(1, "ARCH_SET_GS");
asm volatile ("mov %%gs, %0" : "=rm" (sel));
base = read_base(GS);
if (base == value) {
printf("[OK]\tGSBASE was set as expected (selector 0x%hx)\n",
sel);
} else {
nerrs++;
printf("[FAIL]\tGSBASE was not as expected: got 0x%lx (selector 0x%hx)\n",
base, sel);
}
if (syscall(SYS_arch_prctl, ARCH_GET_GS, &base) != 0)
err(1, "ARCH_GET_GS");
if (base == value) {
printf("[OK]\tARCH_GET_GS worked as expected (selector 0x%hx)\n",
sel);
} else {
nerrs++;
printf("[FAIL]\tARCH_GET_GS was not as expected: got 0x%lx (selector 0x%hx)\n",
base, sel);
}
}
static void mov_0_gs(unsigned long initial_base, bool schedule)
{
unsigned long base, arch_base;
printf("[RUN]\tARCH_SET_GS to 0x%lx then mov 0 to %%gs%s\n", initial_base, schedule ? " and schedule " : "");
if (syscall(SYS_arch_prctl, ARCH_SET_GS, initial_base) != 0)
err(1, "ARCH_SET_GS");
if (schedule)
usleep(10);
asm volatile ("mov %0, %%gs" : : "rm" (0));
base = read_base(GS);
if (syscall(SYS_arch_prctl, ARCH_GET_GS, &arch_base) != 0)
err(1, "ARCH_GET_GS");
if (base == arch_base) {
printf("[OK]\tGSBASE is 0x%lx\n", base);
} else {
nerrs++;
printf("[FAIL]\tGSBASE changed to 0x%lx but kernel reports 0x%lx\n", base, arch_base);
}
}
static volatile unsigned long remote_base;
static volatile bool remote_hard_zero;
static volatile unsigned int ftx;
/*
* ARCH_SET_FS/GS(0) may or may not program a selector of zero. HARD_ZERO
* means to force the selector to zero to improve test coverage.
*/
#define HARD_ZERO 0xa1fa5f343cb85fa4
static void do_remote_base()
{
unsigned long to_set = remote_base;
bool hard_zero = false;
if (to_set == HARD_ZERO) {
to_set = 0;
hard_zero = true;
}
if (syscall(SYS_arch_prctl, ARCH_SET_GS, to_set) != 0)
err(1, "ARCH_SET_GS");
if (hard_zero)
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0));
unsigned short sel;
asm volatile ("mov %%gs, %0" : "=rm" (sel));
printf("\tother thread: ARCH_SET_GS(0x%lx)%s -- sel is 0x%hx\n",
to_set, hard_zero ? " and clear gs" : "", sel);
}
void do_unexpected_base(void)
{
/*
* The goal here is to try to arrange for GS == 0, GSBASE !=
* 0, and for the the kernel the think that GSBASE == 0.
*
* To make the test as reliable as possible, this uses
* explicit descriptorss. (This is not the only way. This
* could use ARCH_SET_GS with a low, nonzero base, but the
* relevant side effect of ARCH_SET_GS could change.)
*/
/* Step 1: tell the kernel that we have GSBASE == 0. */
if (syscall(SYS_arch_prctl, ARCH_SET_GS, 0) != 0)
err(1, "ARCH_SET_GS");
/* Step 2: change GSBASE without telling the kernel. */
struct user_desc desc = {
.entry_number = 0,
.base_addr = 0xBAADF00D,
.limit = 0xfffff,
.seg_32bit = 1,
.contents = 0, /* Data, grow-up */
.read_exec_only = 0,
.limit_in_pages = 1,
.seg_not_present = 0,
.useable = 0
};
if (syscall(SYS_modify_ldt, 1, &desc, sizeof(desc)) == 0) {
printf("\tother thread: using LDT slot 0\n");
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0x7));
} else {
/* No modify_ldt for us (configured out, perhaps) */
struct user_desc *low_desc = mmap(
NULL, sizeof(desc),
PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_32BIT, -1, 0);
memcpy(low_desc, &desc, sizeof(desc));
low_desc->entry_number = -1;
/* 32-bit set_thread_area */
long ret;
asm volatile ("int $0x80"
: "=a" (ret) : "a" (243), "b" (low_desc)
: "r8", "r9", "r10", "r11");
memcpy(&desc, low_desc, sizeof(desc));
munmap(low_desc, sizeof(desc));
if (ret != 0) {
printf("[NOTE]\tcould not create a segment -- test won't do anything\n");
return;
}
printf("\tother thread: using GDT slot %d\n", desc.entry_number);
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)((desc.entry_number << 3) | 0x3)));
}
/*
* Step 3: set the selector back to zero. On AMD chips, this will
* preserve GSBASE.
*/
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0));
}
static void *threadproc(void *ctx)
{
while (1) {
while (ftx == 0)
syscall(SYS_futex, &ftx, FUTEX_WAIT, 0, NULL, NULL, 0);
if (ftx == 3)
return NULL;
if (ftx == 1)
do_remote_base();
else if (ftx == 2)
do_unexpected_base();
else
errx(1, "helper thread got bad command");
ftx = 0;
syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0);
}
}
static void set_gs_and_switch_to(unsigned long local,
unsigned short force_sel,
unsigned long remote)
{
unsigned long base;
unsigned short sel_pre_sched, sel_post_sched;
bool hard_zero = false;
if (local == HARD_ZERO) {
hard_zero = true;
local = 0;
}
printf("[RUN]\tARCH_SET_GS(0x%lx)%s, then schedule to 0x%lx\n",
local, hard_zero ? " and clear gs" : "", remote);
if (force_sel)
printf("\tBefore schedule, set selector to 0x%hx\n", force_sel);
if (syscall(SYS_arch_prctl, ARCH_SET_GS, local) != 0)
err(1, "ARCH_SET_GS");
if (hard_zero)
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0));
if (read_base(GS) != local) {
nerrs++;
printf("[FAIL]\tGSBASE wasn't set as expected\n");
}
if (force_sel) {
asm volatile ("mov %0, %%gs" : : "rm" (force_sel));
sel_pre_sched = force_sel;
local = read_base(GS);
/*
* Signal delivery seems to mess up weird selectors. Put it
* back.
*/
asm volatile ("mov %0, %%gs" : : "rm" (force_sel));
} else {
asm volatile ("mov %%gs, %0" : "=rm" (sel_pre_sched));
}
remote_base = remote;
ftx = 1;
syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0);
while (ftx != 0)
syscall(SYS_futex, &ftx, FUTEX_WAIT, 1, NULL, NULL, 0);
asm volatile ("mov %%gs, %0" : "=rm" (sel_post_sched));
base = read_base(GS);
if (base == local && sel_pre_sched == sel_post_sched) {
printf("[OK]\tGS/BASE remained 0x%hx/0x%lx\n",
sel_pre_sched, local);
} else {
nerrs++;
printf("[FAIL]\tGS/BASE changed from 0x%hx/0x%lx to 0x%hx/0x%lx\n",
sel_pre_sched, local, sel_post_sched, base);
}
}
static void test_unexpected_base(void)
{
unsigned long base;
printf("[RUN]\tARCH_SET_GS(0), clear gs, then manipulate GSBASE in a different thread\n");
if (syscall(SYS_arch_prctl, ARCH_SET_GS, 0) != 0)
err(1, "ARCH_SET_GS");
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0));
ftx = 2;
syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0);
while (ftx != 0)
syscall(SYS_futex, &ftx, FUTEX_WAIT, 1, NULL, NULL, 0);
base = read_base(GS);
if (base == 0) {
printf("[OK]\tGSBASE remained 0\n");
} else {
nerrs++;
printf("[FAIL]\tGSBASE changed to 0x%lx\n", base);
}
}
int main()
{
pthread_t thread;
sethandler(SIGSEGV, sigsegv, 0);
check_gs_value(0);
check_gs_value(1);
check_gs_value(0x200000000);
check_gs_value(0);
check_gs_value(0x200000000);
check_gs_value(1);
for (int sched = 0; sched < 2; sched++) {
mov_0_gs(0, !!sched);
mov_0_gs(1, !!sched);
mov_0_gs(0x200000000, !!sched);
}
/* Set up for multithreading. */
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(0, &cpuset);
if (sched_setaffinity(0, sizeof(cpuset), &cpuset) != 0)
err(1, "sched_setaffinity to CPU 0"); /* should never fail */
if (pthread_create(&thread, 0, threadproc, 0) != 0)
err(1, "pthread_create");
static unsigned long bases_with_hard_zero[] = {
0, HARD_ZERO, 1, 0x200000000,
};
for (int local = 0; local < 4; local++) {
for (int remote = 0; remote < 4; remote++) {
for (unsigned short s = 0; s < 5; s++) {
unsigned short sel = s;
if (s == 4)
asm ("mov %%ss, %0" : "=rm" (sel));
set_gs_and_switch_to(
bases_with_hard_zero[local],
sel,
bases_with_hard_zero[remote]);
}
}
}
test_unexpected_base();
ftx = 3; /* Kill the thread. */
syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0);
if (pthread_join(thread, NULL) != 0)
err(1, "pthread_join");
return nerrs == 0 ? 0 : 1;
}