/*
* Copyright © 2012 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#ifndef BLORP_PRIV_H
#define BLORP_PRIV_H
#include <stdint.h>
#include "compiler/nir/nir.h"
#include "compiler/brw_compiler.h"
#include "blorp.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* Binding table indices used by BLORP.
*/
enum {
BLORP_RENDERBUFFER_BT_INDEX,
BLORP_TEXTURE_BT_INDEX,
BLORP_NUM_BT_ENTRIES
};
struct brw_blorp_surface_info
{
bool enabled;
struct isl_surf surf;
struct blorp_address addr;
struct isl_surf aux_surf;
struct blorp_address aux_addr;
enum isl_aux_usage aux_usage;
union isl_color_value clear_color;
struct blorp_address clear_color_addr;
struct isl_view view;
/* Z offset into a 3-D texture or slice of a 2-D array texture. */
uint32_t z_offset;
uint32_t tile_x_sa, tile_y_sa;
};
void
brw_blorp_surface_info_init(struct blorp_context *blorp,
struct brw_blorp_surface_info *info,
const struct blorp_surf *surf,
unsigned int level, unsigned int layer,
enum isl_format format, bool is_render_target);
void
blorp_surf_convert_to_single_slice(const struct isl_device *isl_dev,
struct brw_blorp_surface_info *info);
void
blorp_surf_convert_to_uncompressed(const struct isl_device *isl_dev,
struct brw_blorp_surface_info *info,
uint32_t *x, uint32_t *y,
uint32_t *width, uint32_t *height);
struct brw_blorp_coord_transform
{
float multiplier;
float offset;
};
/**
* Bounding rectangle telling pixel discard which pixels are not to be
* touched. This is needed in when surfaces are configured as something else
* what they really are:
*
* - writing W-tiled stencil as Y-tiled
* - writing interleaved multisampled as single sampled.
*
* See blorp_nir_discard_if_outside_rect().
*/
struct brw_blorp_discard_rect
{
uint32_t x0;
uint32_t x1;
uint32_t y0;
uint32_t y1;
};
/**
* Grid needed for blended and scaled blits of integer formats, see
* blorp_nir_manual_blend_bilinear().
*/
struct brw_blorp_rect_grid
{
float x1;
float y1;
float pad[2];
};
struct blorp_surf_offset {
uint32_t x;
uint32_t y;
};
struct brw_blorp_wm_inputs
{
uint32_t clear_color[4];
struct brw_blorp_discard_rect discard_rect;
struct brw_blorp_rect_grid rect_grid;
struct brw_blorp_coord_transform coord_transform[2];
struct blorp_surf_offset src_offset;
struct blorp_surf_offset dst_offset;
/* (1/width, 1/height) for the source surface */
float src_inv_size[2];
/* Minimum layer setting works for all the textures types but texture_3d
* for which the setting has no effect. Use the z-coordinate instead.
*/
uint32_t src_z;
/* Pad out to an integral number of registers */
uint32_t pad[1];
};
#define BLORP_CREATE_NIR_INPUT(shader, name, type) ({ \
nir_variable *input = nir_variable_create((shader), nir_var_shader_in, \
type, #name); \
if ((shader)->info.stage == MESA_SHADER_FRAGMENT) \
input->data.interpolation = INTERP_MODE_FLAT; \
input->data.location = VARYING_SLOT_VAR0 + \
offsetof(struct brw_blorp_wm_inputs, name) / (4 * sizeof(float)); \
input->data.location_frac = \
(offsetof(struct brw_blorp_wm_inputs, name) / sizeof(float)) % 4; \
input; \
})
struct blorp_vs_inputs {
uint32_t base_layer;
uint32_t _instance_id; /* Set in hardware by SGVS */
uint32_t pad[2];
};
static inline unsigned
brw_blorp_get_urb_length(const struct brw_wm_prog_data *prog_data)
{
if (prog_data == NULL)
return 1;
/* From the BSpec: 3D Pipeline - Strips and Fans - 3DSTATE_SBE
*
* read_length = ceiling((max_source_attr+1)/2)
*/
return MAX2((prog_data->num_varying_inputs + 1) / 2, 1);
}
struct blorp_params
{
uint32_t x0;
uint32_t y0;
uint32_t x1;
uint32_t y1;
float z;
uint8_t stencil_mask;
uint8_t stencil_ref;
struct brw_blorp_surface_info depth;
struct brw_blorp_surface_info stencil;
uint32_t depth_format;
struct brw_blorp_surface_info src;
struct brw_blorp_surface_info dst;
enum blorp_hiz_op hiz_op;
bool full_surface_hiz_op;
enum blorp_fast_clear_op fast_clear_op;
bool color_write_disable[4];
struct brw_blorp_wm_inputs wm_inputs;
struct blorp_vs_inputs vs_inputs;
unsigned num_samples;
unsigned num_draw_buffers;
unsigned num_layers;
uint32_t vs_prog_kernel;
struct brw_vs_prog_data *vs_prog_data;
uint32_t sf_prog_kernel;
struct brw_sf_prog_data *sf_prog_data;
uint32_t wm_prog_kernel;
struct brw_wm_prog_data *wm_prog_data;
bool use_pre_baked_binding_table;
uint32_t pre_baked_binding_table_offset;
};
void blorp_params_init(struct blorp_params *params);
enum blorp_shader_type {
BLORP_SHADER_TYPE_BLIT,
BLORP_SHADER_TYPE_CLEAR,
BLORP_SHADER_TYPE_MCS_PARTIAL_RESOLVE,
BLORP_SHADER_TYPE_LAYER_OFFSET_VS,
BLORP_SHADER_TYPE_GEN4_SF,
};
struct brw_blorp_blit_prog_key
{
enum blorp_shader_type shader_type; /* Must be BLORP_SHADER_TYPE_BLIT */
/* Number of samples per pixel that have been configured in the surface
* state for texturing from.
*/
unsigned tex_samples;
/* MSAA layout that has been configured in the surface state for texturing
* from.
*/
enum isl_msaa_layout tex_layout;
enum isl_aux_usage tex_aux_usage;
/* Actual number of samples per pixel in the source image. */
unsigned src_samples;
/* Actual MSAA layout used by the source image. */
enum isl_msaa_layout src_layout;
/* Number of bits per channel in the source image. */
uint8_t src_bpc;
/* True if the source requires normalized coordinates */
bool src_coords_normalized;
/* Number of samples per pixel that have been configured in the render
* target.
*/
unsigned rt_samples;
/* MSAA layout that has been configured in the render target. */
enum isl_msaa_layout rt_layout;
/* Actual number of samples per pixel in the destination image. */
unsigned dst_samples;
/* Actual MSAA layout used by the destination image. */
enum isl_msaa_layout dst_layout;
/* Number of bits per channel in the destination image. */
uint8_t dst_bpc;
/* Type of the data to be read from the texture (one of
* nir_type_(int|uint|float)).
*/
nir_alu_type texture_data_type;
/* True if the source image is W tiled. If true, the surface state for the
* source image must be configured as Y tiled, and tex_samples must be 0.
*/
bool src_tiled_w;
/* True if the destination image is W tiled. If true, the surface state
* for the render target must be configured as Y tiled, and rt_samples must
* be 0.
*/
bool dst_tiled_w;
/* True if the destination is an RGB format. If true, the surface state
* for the render target must be configured as red with three times the
* normal width. We need to do this because you cannot render to
* non-power-of-two formats.
*/
bool dst_rgb;
/* True if all source samples should be blended together to produce each
* destination pixel. If true, src_tiled_w must be false, tex_samples must
* equal src_samples, and tex_samples must be nonzero.
*/
bool blend;
/* True if the rectangle being sent through the rendering pipeline might be
* larger than the destination rectangle, so the WM program should kill any
* pixels that are outside the destination rectangle.
*/
bool use_kill;
/**
* True if the WM program should be run in MSDISPMODE_PERSAMPLE with more
* than one sample per pixel.
*/
bool persample_msaa_dispatch;
/* True for scaled blitting. */
bool blit_scaled;
/* True if this blit operation may involve intratile offsets on the source.
* In this case, we need to add the offset before texturing.
*/
bool need_src_offset;
/* True if this blit operation may involve intratile offsets on the
* destination. In this case, we need to add the offset to gl_FragCoord.
*/
bool need_dst_offset;
/* Scale factors between the pixel grid and the grid of samples. We're
* using grid of samples for bilinear filetring in multisample scaled blits.
*/
float x_scale;
float y_scale;
/* True for blits with filter = GL_LINEAR. */
bool bilinear_filter;
};
/**
* \name BLORP internals
* \{
*
* Used internally by gen6_blorp_exec() and gen7_blorp_exec().
*/
void brw_blorp_init_wm_prog_key(struct brw_wm_prog_key *wm_key);
const unsigned *
blorp_compile_fs(struct blorp_context *blorp, void *mem_ctx,
struct nir_shader *nir,
struct brw_wm_prog_key *wm_key,
bool use_repclear,
struct brw_wm_prog_data *wm_prog_data);
const unsigned *
blorp_compile_vs(struct blorp_context *blorp, void *mem_ctx,
struct nir_shader *nir,
struct brw_vs_prog_data *vs_prog_data);
bool
blorp_ensure_sf_program(struct blorp_context *blorp,
struct blorp_params *params);
/** \} */
#ifdef __cplusplus
} /* end extern "C" */
#endif /* __cplusplus */
#endif /* BLORP_PRIV_H */