/******************************************************************************
*
* Copyright 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* this file contains the PORT API definitions
*
******************************************************************************/
#ifndef PORT_API_H
#define PORT_API_H
#include "bt_target.h"
/*****************************************************************************
* Constants and Types
****************************************************************************/
/*
* Define port settings structure send from the application in the
* set settings request, or to the application in the set settings indication.
*/
typedef struct {
#define PORT_BAUD_RATE_2400 0x00
#define PORT_BAUD_RATE_4800 0x01
#define PORT_BAUD_RATE_7200 0x02
#define PORT_BAUD_RATE_9600 0x03
#define PORT_BAUD_RATE_19200 0x04
#define PORT_BAUD_RATE_38400 0x05
#define PORT_BAUD_RATE_57600 0x06
#define PORT_BAUD_RATE_115200 0x07
#define PORT_BAUD_RATE_230400 0x08
uint8_t baud_rate;
#define PORT_5_BITS 0x00
#define PORT_6_BITS 0x01
#define PORT_7_BITS 0x02
#define PORT_8_BITS 0x03
uint8_t byte_size;
#define PORT_ONESTOPBIT 0x00
#define PORT_ONE5STOPBITS 0x01
uint8_t stop_bits;
#define PORT_PARITY_NO 0x00
#define PORT_PARITY_YES 0x01
uint8_t parity;
#define PORT_ODD_PARITY 0x00
#define PORT_EVEN_PARITY 0x01
#define PORT_MARK_PARITY 0x02
#define PORT_SPACE_PARITY 0x03
uint8_t parity_type;
#define PORT_FC_OFF 0x00
#define PORT_FC_XONXOFF_ON_INPUT 0x01
#define PORT_FC_XONXOFF_ON_OUTPUT 0x02
#define PORT_FC_CTS_ON_INPUT 0x04
#define PORT_FC_CTS_ON_OUTPUT 0x08
#define PORT_FC_DSR_ON_INPUT 0x10
#define PORT_FC_DSR_ON_OUTPUT 0x20
uint8_t fc_type;
uint8_t rx_char1;
#define PORT_XON_DC1 0x11
uint8_t xon_char;
#define PORT_XOFF_DC3 0x13
uint8_t xoff_char;
} tPORT_STATE;
/*
* Define the callback function prototypes. Parameters are specific
* to each event and are described bellow
*/
typedef int(tPORT_DATA_CALLBACK)(uint16_t port_handle, void* p_data,
uint16_t len);
#define DATA_CO_CALLBACK_TYPE_INCOMING 1
#define DATA_CO_CALLBACK_TYPE_OUTGOING_SIZE 2
#define DATA_CO_CALLBACK_TYPE_OUTGOING 3
typedef int(tPORT_DATA_CO_CALLBACK)(uint16_t port_handle, uint8_t* p_buf,
uint16_t len, int type);
typedef void(tPORT_CALLBACK)(uint32_t code, uint16_t port_handle);
/*
* Define events that registered application can receive in the callback
*/
#define PORT_EV_RXCHAR 0x00000001 /* Any Character received */
#define PORT_EV_RXFLAG 0x00000002 /* Received certain character */
#define PORT_EV_TXEMPTY 0x00000004 /* Transmitt Queue Empty */
#define PORT_EV_CTS 0x00000008 /* CTS changed state */
#define PORT_EV_DSR 0x00000010 /* DSR changed state */
#define PORT_EV_RLSD 0x00000020 /* RLSD changed state */
#define PORT_EV_BREAK 0x00000040 /* BREAK received */
#define PORT_EV_ERR 0x00000080 /* Line status error occurred */
#define PORT_EV_RING 0x00000100 /* Ring signal detected */
#define PORT_EV_CTSS 0x00000400 /* CTS state */
#define PORT_EV_DSRS 0x00000800 /* DSR state */
#define PORT_EV_RLSDS 0x00001000 /* RLSD state */
#define PORT_EV_OVERRUN 0x00002000 /* receiver buffer overrun */
#define PORT_EV_TXCHAR 0x00004000 /* Any character transmitted */
/* RFCOMM connection established */
#define PORT_EV_CONNECTED 0x00000200
/* Unable to establish connection or disconnected */
#define PORT_EV_CONNECT_ERR 0x00008000
/* data flow enabled flag changed by remote */
#define PORT_EV_FC 0x00010000
/* data flow enable status true = enabled */
#define PORT_EV_FCS 0x00020000
/*
* To register for events application should provide bitmask with
* corresponding bit set
*/
#define PORT_MASK_ALL \
(PORT_EV_RXCHAR | PORT_EV_TXEMPTY | PORT_EV_CTS | PORT_EV_DSR | \
PORT_EV_RLSD | PORT_EV_BREAK | PORT_EV_ERR | PORT_EV_RING | \
PORT_EV_CONNECT_ERR | PORT_EV_DSRS | PORT_EV_CTSS | PORT_EV_RLSDS | \
PORT_EV_RXFLAG | PORT_EV_TXCHAR | PORT_EV_OVERRUN | PORT_EV_FC | \
PORT_EV_FCS | PORT_EV_CONNECTED)
/*
* Define port result codes
*/
#define PORT_SUCCESS 0
#define PORT_ERR_BASE 0
#define PORT_UNKNOWN_ERROR (PORT_ERR_BASE + 1)
#define PORT_ALREADY_OPENED (PORT_ERR_BASE + 2)
#define PORT_CMD_PENDING (PORT_ERR_BASE + 3)
#define PORT_APP_NOT_REGISTERED (PORT_ERR_BASE + 4)
#define PORT_NO_MEM (PORT_ERR_BASE + 5)
#define PORT_NO_RESOURCES (PORT_ERR_BASE + 6)
#define PORT_BAD_BD_ADDR (PORT_ERR_BASE + 7)
#define PORT_BAD_HANDLE (PORT_ERR_BASE + 9)
#define PORT_NOT_OPENED (PORT_ERR_BASE + 10)
#define PORT_LINE_ERR (PORT_ERR_BASE + 11)
#define PORT_START_FAILED (PORT_ERR_BASE + 12)
#define PORT_PAR_NEG_FAILED (PORT_ERR_BASE + 13)
#define PORT_PORT_NEG_FAILED (PORT_ERR_BASE + 14)
#define PORT_SEC_FAILED (PORT_ERR_BASE + 15)
#define PORT_PEER_CONNECTION_FAILED (PORT_ERR_BASE + 16)
#define PORT_PEER_FAILED (PORT_ERR_BASE + 17)
#define PORT_PEER_TIMEOUT (PORT_ERR_BASE + 18)
#define PORT_CLOSED (PORT_ERR_BASE + 19)
#define PORT_TX_FULL (PORT_ERR_BASE + 20)
#define PORT_LOCAL_CLOSED (PORT_ERR_BASE + 21)
#define PORT_LOCAL_TIMEOUT (PORT_ERR_BASE + 22)
#define PORT_TX_QUEUE_DISABLED (PORT_ERR_BASE + 23)
#define PORT_PAGE_TIMEOUT (PORT_ERR_BASE + 24)
#define PORT_INVALID_SCN (PORT_ERR_BASE + 25)
#define PORT_ERR_MAX (PORT_ERR_BASE + 26)
/*****************************************************************************
* External Function Declarations
****************************************************************************/
/*******************************************************************************
*
* Function RFCOMM_CreateConnection
*
* Description RFCOMM_CreateConnection is used from the application to
* establish a serial port connection to the peer device,
* or allow RFCOMM to accept a connection from the peer
* application.
*
* Parameters: scn - Service Channel Number as registered with
* the SDP (server) or obtained using SDP from
* the peer device (client).
* is_server - true if requesting application is a server
* mtu - Maximum frame size the application can accept
* bd_addr - address of the peer (client)
* mask - specifies events to be enabled. A value
* of zero disables all events.
* p_handle - OUT pointer to the handle.
* p_mgmt_cb - pointer to callback function to receive
* connection up/down events.
* Notes:
*
* Server can call this function with the same scn parameter multiple times if
* it is ready to accept multiple simulteneous connections.
*
* DLCI for the connection is (scn * 2 + 1) if client originates connection on
* existing none initiator multiplexer channel. Otherwise it is (scn * 2).
* For the server DLCI can be changed later if client will be calling it using
* (scn * 2 + 1) dlci.
*
******************************************************************************/
extern int RFCOMM_CreateConnection(uint16_t uuid, uint8_t scn, bool is_server,
uint16_t mtu, const RawAddress& bd_addr,
uint16_t* p_handle,
tPORT_CALLBACK* p_mgmt_cb);
/*******************************************************************************
*
* Function RFCOMM_RemoveConnection
*
* Description This function is called to close the specified connection.
*
* Parameters: handle - Handle of the port returned in the Open
*
******************************************************************************/
extern int RFCOMM_RemoveConnection(uint16_t handle);
/*******************************************************************************
*
* Function RFCOMM_RemoveServer
*
* Description This function is called to close the server port.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
*
******************************************************************************/
extern int RFCOMM_RemoveServer(uint16_t handle);
/*******************************************************************************
*
* Function PORT_SetEventCallback
*
* Description Set event callback the specified connection.
*
* Parameters: handle - Handle of the port returned in the Open
* p_callback - address of the callback function which should
* be called from the RFCOMM when an event
* specified in the mask occurs.
*
******************************************************************************/
extern int PORT_SetEventCallback(uint16_t port_handle,
tPORT_CALLBACK* p_port_cb);
/*******************************************************************************
*
* Function PORT_ClearKeepHandleFlag
*
* Description Called to clear the keep handle flag, which will cause
* not to keep the port handle open when closed
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
*
******************************************************************************/
int PORT_ClearKeepHandleFlag(uint16_t port_handle);
/*******************************************************************************
*
* Function PORT_SetEventCallback
*
* Description Set event data callback the specified connection.
*
* Parameters: handle - Handle of the port returned in the Open
* p_callback - address of the callback function which should
* be called from the RFCOMM when a data
* packet is received.
*
******************************************************************************/
extern int PORT_SetDataCallback(uint16_t port_handle,
tPORT_DATA_CALLBACK* p_cb);
extern int PORT_SetDataCOCallback(uint16_t port_handle,
tPORT_DATA_CO_CALLBACK* p_port_cb);
/*******************************************************************************
*
* Function PORT_SetEventMask
*
* Description This function is called to close the specified connection.
*
* Parameters: handle - Handle of the port returned in the Open
* mask - specifies events to be enabled. A value
* of zero disables all events.
*
******************************************************************************/
extern int PORT_SetEventMask(uint16_t port_handle, uint32_t mask);
/*******************************************************************************
*
* Function PORT_CheckConnection
*
* Description This function returns PORT_SUCCESS if connection referenced
* by handle is up and running
*
* Parameters: handle - Handle of the port returned in the Open
* bd_addr - OUT bd_addr of the peer
* p_lcid - OUT L2CAP's LCID
*
******************************************************************************/
extern int PORT_CheckConnection(uint16_t handle, RawAddress* bd_addr,
uint16_t* p_lcid);
/*******************************************************************************
*
* Function PORT_IsOpening
*
* Description This function returns true if there is any RFCOMM connection
* opening in process.
*
* Parameters: true if any connection opening is found
* bd_addr - bd_addr of the peer
*
******************************************************************************/
extern bool PORT_IsOpening(RawAddress* bd_addr);
/*******************************************************************************
*
* Function PORT_SetState
*
* Description This function configures connection according to the
* specifications in the tPORT_STATE structure.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* p_settings - Pointer to a tPORT_STATE structure containing
* configuration information for the connection.
*
******************************************************************************/
extern int PORT_SetState(uint16_t handle, tPORT_STATE* p_settings);
/*******************************************************************************
*
* Function PORT_GetRxQueueCnt
*
* Description This function return number of buffers on the rx queue.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* p_rx_queue_count - Pointer to return queue count in.
*
******************************************************************************/
extern int PORT_GetRxQueueCnt(uint16_t handle, uint16_t* p_rx_queue_count);
/*******************************************************************************
*
* Function PORT_GetState
*
* Description This function is called to fill tPORT_STATE structure
* with the current control settings for the port
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* p_settings - Pointer to a tPORT_STATE structure in which
* configuration information is returned.
*
******************************************************************************/
extern int PORT_GetState(uint16_t handle, tPORT_STATE* p_settings);
/*******************************************************************************
*
* Function PORT_Control
*
* Description This function directs a specified connection to pass control
* control information to the peer device.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* signal - specify the function to be passed
*
******************************************************************************/
#define PORT_SET_DTRDSR 0x01
#define PORT_CLR_DTRDSR 0x02
#define PORT_SET_CTSRTS 0x03
#define PORT_CLR_CTSRTS 0x04
#define PORT_SET_RI 0x05 /* DCE only */
#define PORT_CLR_RI 0x06 /* DCE only */
#define PORT_SET_DCD 0x07 /* DCE only */
#define PORT_CLR_DCD 0x08 /* DCE only */
#define PORT_BREAK 0x09 /* Break event */
extern int PORT_Control(uint16_t handle, uint8_t signal);
/*******************************************************************************
*
* Function PORT_FlowControl
*
* Description This function directs a specified connection to pass
* flow control message to the peer device. Enable flag passed
* shows if port can accept more data.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* enable - enables data flow
*
******************************************************************************/
extern int PORT_FlowControl(uint16_t handle, bool enable);
/*******************************************************************************
*
* Function PORT_FlowControl_MaxCredit
*
* Description This function directs a specified connection to pass
* flow control message to the peer device. Enable flag passed
* shows if port can accept more data. It also sends max credit
* when data flow enabled
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* enable - enables data flow
*
******************************************************************************/
extern int PORT_FlowControl_MaxCredit(uint16_t handle, bool enable);
/*******************************************************************************
*
* Function PORT_GetModemStatus
*
* Description This function retrieves modem control signals. Normally
* application will call this function after a callback
* function is called with notification that one of signals
* has been changed.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* callback.
* p_signal - specify the pointer to control signals info
*
******************************************************************************/
#define PORT_DTRDSR_ON 0x01
#define PORT_CTSRTS_ON 0x02
#define PORT_RING_ON 0x04
#define PORT_DCD_ON 0x08
/*
* Define default initial local modem signals state after connection established
*/
#define PORT_OBEX_DEFAULT_SIGNAL_STATE \
(PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON)
#define PORT_SPP_DEFAULT_SIGNAL_STATE \
(PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON)
#define PORT_PPP_DEFAULT_SIGNAL_STATE \
(PORT_DTRDSR_ON | PORT_CTSRTS_ON | PORT_DCD_ON)
#define PORT_DUN_DEFAULT_SIGNAL_STATE (PORT_DTRDSR_ON | PORT_CTSRTS_ON)
extern int PORT_GetModemStatus(uint16_t handle, uint8_t* p_control_signal);
/*******************************************************************************
*
* Function PORT_ClearError
*
* Description This function retreives information about a communications
* error and reports current status of a connection. The
* function should be called when an error occures to clear
* the connection error flag and to enable additional read
* and write operations.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* p_errors - pointer of the variable to receive error codes
* p_status - pointer to the tPORT_STATUS structur to receive
* connection status
*
******************************************************************************/
#define PORT_ERR_BREAK 0x01 /* Break condition occured on the peer device */
#define PORT_ERR_OVERRUN 0x02 /* Overrun is reported by peer device */
#define PORT_ERR_FRAME 0x04 /* Framing error reported by peer device */
#define PORT_ERR_RXOVER 0x08 /* Input queue overflow occured */
#define PORT_ERR_TXFULL 0x10 /* Output queue overflow occured */
typedef struct {
#define PORT_FLAG_CTS_HOLD 0x01 /* Tx is waiting for CTS signal */
#define PORT_FLAG_DSR_HOLD 0x02 /* Tx is waiting for DSR signal */
#define PORT_FLAG_RLSD_HOLD 0x04 /* Tx is waiting for RLSD signal */
uint16_t flags;
uint16_t in_queue_size; /* Number of bytes in the input queue */
uint16_t out_queue_size; /* Number of bytes in the output queue */
uint16_t mtu_size; /* peer MTU size */
} tPORT_STATUS;
extern int PORT_ClearError(uint16_t handle, uint16_t* p_errors,
tPORT_STATUS* p_status);
/*******************************************************************************
*
* Function PORT_SendError
*
* Description This function send a communications error to the peer device
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* errors - receive error codes
*
******************************************************************************/
extern int PORT_SendError(uint16_t handle, uint8_t errors);
/*******************************************************************************
*
* Function PORT_GetQueueStatus
*
* Description This function reports current status of a connection.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* p_status - pointer to the tPORT_STATUS structur to receive
* connection status
*
******************************************************************************/
extern int PORT_GetQueueStatus(uint16_t handle, tPORT_STATUS* p_status);
/*******************************************************************************
*
* Function PORT_Purge
*
* Description This function discards all the data from the output or
* input queues of the specified connection.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* purge_flags - specify the action to take.
*
******************************************************************************/
#define PORT_PURGE_TXCLEAR 0x01
#define PORT_PURGE_RXCLEAR 0x02
extern int PORT_Purge(uint16_t handle, uint8_t purge_flags);
/*******************************************************************************
*
* Function PORT_Read
*
* Description This function returns the pointer to the buffer received
* from the peer device. Normally application will call this
* function after receiving PORT_EVT_RXCHAR event.
* Application calling this function is responsible to free
* buffer returned.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* callback.
* pp_buf - pointer to address of buffer with data,
*
******************************************************************************/
extern int PORT_Read(uint16_t handle, BT_HDR** pp_buf);
/*******************************************************************************
*
* Function PORT_ReadData
*
* Description Normally application will call this function after receiving
* PORT_EVT_RXCHAR event.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* callback.
* p_data - Data area
* max_len - Byte count requested
* p_len - Byte count received
*
******************************************************************************/
extern int PORT_ReadData(uint16_t handle, char* p_data, uint16_t max_len,
uint16_t* p_len);
/*******************************************************************************
*
* Function PORT_Write
*
* Description This function to send BT buffer to the peer device.
* Application should not free the buffer.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* p_buf - pointer to the buffer with data,
*
******************************************************************************/
extern int PORT_Write(uint16_t handle, BT_HDR* p_buf);
/*******************************************************************************
*
* Function PORT_WriteData
*
* Description This function is called from the legacy application to
* send data.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* p_data - Data area
* max_len - Byte count to write
* p_len - Bytes written
*
******************************************************************************/
extern int PORT_WriteData(uint16_t handle, const char* p_data, uint16_t max_len,
uint16_t* p_len);
/*******************************************************************************
*
* Function PORT_WriteDataCO
*
* Description Normally not GKI aware application will call this function
* to send data to the port by callout functions.
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
*
******************************************************************************/
extern int PORT_WriteDataCO(uint16_t handle, int* p_len);
/*******************************************************************************
*
* Function PORT_Test
*
* Description Application can call this function to send RFCOMM Test frame
*
* Parameters: handle - Handle returned in the RFCOMM_CreateConnection
* p_data - Data area
* max_len - Byte count requested
*
******************************************************************************/
extern int PORT_Test(uint16_t handle, uint8_t* p_data, uint16_t len);
/*******************************************************************************
*
* Function RFCOMM_Init
*
* Description This function is called to initialize RFCOMM layer
*
******************************************************************************/
extern void RFCOMM_Init(void);
/*******************************************************************************
*
* Function PORT_SetTraceLevel
*
* Description Set the trace level for RFCOMM. If called with
* a value of 0xFF, it simply reads the current trace level.
*
* Returns the new (current) trace level
*
******************************************************************************/
extern uint8_t PORT_SetTraceLevel(uint8_t new_level);
/*******************************************************************************
*
* Function PORT_GetResultString
*
* Description This function returns the human-readable string for a given
* result code.
*
* Returns a pointer to the human-readable string for the given
* result. Note that the string returned must not be freed.
*
******************************************************************************/
extern const char* PORT_GetResultString(const uint8_t result_code);
#endif /* PORT_API_H */