/* ** ** Copyright 2008, The Android Open Source Project ** ** Licensed under the Apache License, Version 2.0 (the "License"); ** you may not use this file except in compliance with the License. ** You may obtain a copy of the License at ** ** http://www.apache.org/licenses/LICENSE-2.0 ** ** Unless required by applicable law or agreed to in writing, software ** distributed under the License is distributed on an "AS IS" BASIS, ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. ** See the License for the specific language governing permissions and ** limitations under the License. */ //#define LOG_NDEBUG 0 #define LOG_TAG "AudioRecord" #include <stdint.h> #include <sys/types.h> #include <sched.h> #include <sys/resource.h> #include <private/media/AudioTrackShared.h> #include <media/AudioSystem.h> #include <media/AudioRecord.h> #include <media/mediarecorder.h> #include <binder/IServiceManager.h> #include <utils/Log.h> #include <binder/MemoryDealer.h> #include <binder/Parcel.h> #include <binder/IPCThreadState.h> #include <utils/Timers.h> #include <cutils/atomic.h> #define LIKELY( exp ) (__builtin_expect( (exp) != 0, true )) #define UNLIKELY( exp ) (__builtin_expect( (exp) != 0, false )) namespace android { // --------------------------------------------------------------------------- AudioRecord::AudioRecord() : mStatus(NO_INIT), mInput(0) { } AudioRecord::AudioRecord( int inputSource, uint32_t sampleRate, int format, uint32_t channels, int frameCount, uint32_t flags, callback_t cbf, void* user, int notificationFrames) : mStatus(NO_INIT), mInput(0) { mStatus = set(inputSource, sampleRate, format, channels, frameCount, flags, cbf, user, notificationFrames); } AudioRecord::~AudioRecord() { if (mStatus == NO_ERROR) { // Make sure that callback function exits in the case where // it is looping on buffer empty condition in obtainBuffer(). // Otherwise the callback thread will never exit. stop(); if (mClientRecordThread != 0) { mClientRecordThread->requestExitAndWait(); mClientRecordThread.clear(); } mAudioRecord.clear(); IPCThreadState::self()->flushCommands(); AudioSystem::releaseInput(mInput); } } status_t AudioRecord::set( int inputSource, uint32_t sampleRate, int format, uint32_t channels, int frameCount, uint32_t flags, callback_t cbf, void* user, int notificationFrames, bool threadCanCallJava) { LOGV("set(): sampleRate %d, channels %d, frameCount %d",sampleRate, channels, frameCount); if (mAudioRecord != 0) { return INVALID_OPERATION; } const sp<IAudioFlinger>& audioFlinger = AudioSystem::get_audio_flinger(); if (audioFlinger == 0) { return NO_INIT; } if (inputSource == AUDIO_SOURCE_DEFAULT) { inputSource = AUDIO_SOURCE_MIC; } if (sampleRate == 0) { sampleRate = DEFAULT_SAMPLE_RATE; } // these below should probably come from the audioFlinger too... if (format == 0) { format = AudioSystem::PCM_16_BIT; } // validate parameters if (!AudioSystem::isValidFormat(format)) { LOGE("Invalid format"); return BAD_VALUE; } if (!AudioSystem::isInputChannel(channels)) { return BAD_VALUE; } int channelCount = AudioSystem::popCount(channels); mInput = AudioSystem::getInput(inputSource, sampleRate, format, channels, (AudioSystem::audio_in_acoustics)flags); if (mInput == 0) { LOGE("Could not get audio output for stream type %d", inputSource); return BAD_VALUE; } // validate framecount size_t inputBuffSizeInBytes = -1; if (AudioSystem::getInputBufferSize(sampleRate, format, channelCount, &inputBuffSizeInBytes) != NO_ERROR) { LOGE("AudioSystem could not query the input buffer size."); return NO_INIT; } if (inputBuffSizeInBytes == 0) { LOGE("Recording parameters are not supported: sampleRate %d, channelCount %d, format %d", sampleRate, channelCount, format); return BAD_VALUE; } int frameSizeInBytes = channelCount * (format == AudioSystem::PCM_16_BIT ? 2 : 1); if (AudioSystem::isLinearPCM(format)) { frameSizeInBytes = channelCount * (format == AudioSystem::PCM_16_BIT ? sizeof(int16_t) : sizeof(int8_t)); } else { frameSizeInBytes = sizeof(int8_t); } // We use 2* size of input buffer for ping pong use of record buffer. int minFrameCount = 2 * inputBuffSizeInBytes / frameSizeInBytes; LOGV("AudioRecord::set() minFrameCount = %d", minFrameCount); if (frameCount == 0) { frameCount = minFrameCount; } else if (frameCount < minFrameCount) { return BAD_VALUE; } if (notificationFrames == 0) { notificationFrames = frameCount/2; } // open record channel status_t status; sp<IAudioRecord> record = audioFlinger->openRecord(getpid(), mInput, sampleRate, format, channelCount, frameCount, ((uint16_t)flags) << 16, &status); if (record == 0) { LOGE("AudioFlinger could not create record track, status: %d", status); return status; } sp<IMemory> cblk = record->getCblk(); if (cblk == 0) { return NO_INIT; } if (cbf != 0) { mClientRecordThread = new ClientRecordThread(*this, threadCanCallJava); if (mClientRecordThread == 0) { return NO_INIT; } } mStatus = NO_ERROR; mAudioRecord = record; mCblkMemory = cblk; mCblk = static_cast<audio_track_cblk_t*>(cblk->pointer()); mCblk->buffers = (char*)mCblk + sizeof(audio_track_cblk_t); mCblk->out = 0; mFormat = format; // Update buffer size in case it has been limited by AudioFlinger during track creation mFrameCount = mCblk->frameCount; mChannelCount = (uint8_t)channelCount; mActive = 0; mCbf = cbf; mNotificationFrames = notificationFrames; mRemainingFrames = notificationFrames; mUserData = user; // TODO: add audio hardware input latency here mLatency = (1000*mFrameCount) / sampleRate; mMarkerPosition = 0; mMarkerReached = false; mNewPosition = 0; mUpdatePeriod = 0; mInputSource = (uint8_t)inputSource; return NO_ERROR; } status_t AudioRecord::initCheck() const { return mStatus; } // ------------------------------------------------------------------------- uint32_t AudioRecord::latency() const { return mLatency; } int AudioRecord::format() const { return mFormat; } int AudioRecord::channelCount() const { return mChannelCount; } uint32_t AudioRecord::frameCount() const { return mFrameCount; } int AudioRecord::frameSize() const { if (AudioSystem::isLinearPCM(mFormat)) { return channelCount()*((format() == AudioSystem::PCM_8_BIT) ? sizeof(uint8_t) : sizeof(int16_t)); } else { return sizeof(uint8_t); } } int AudioRecord::inputSource() const { return (int)mInputSource; } // ------------------------------------------------------------------------- status_t AudioRecord::start() { status_t ret = NO_ERROR; sp<ClientRecordThread> t = mClientRecordThread; LOGV("start"); if (t != 0) { if (t->exitPending()) { if (t->requestExitAndWait() == WOULD_BLOCK) { LOGE("AudioRecord::start called from thread"); return WOULD_BLOCK; } } t->mLock.lock(); } if (android_atomic_or(1, &mActive) == 0) { ret = AudioSystem::startInput(mInput); if (ret == NO_ERROR) { mNewPosition = mCblk->user + mUpdatePeriod; mCblk->bufferTimeoutMs = MAX_RUN_TIMEOUT_MS; mCblk->waitTimeMs = 0; if (t != 0) { t->run("ClientRecordThread", THREAD_PRIORITY_AUDIO_CLIENT); } else { setpriority(PRIO_PROCESS, 0, THREAD_PRIORITY_AUDIO_CLIENT); } ret = mAudioRecord->start(); } } if (t != 0) { t->mLock.unlock(); } return ret; } status_t AudioRecord::stop() { sp<ClientRecordThread> t = mClientRecordThread; LOGV("stop"); if (t != 0) { t->mLock.lock(); } if (android_atomic_and(~1, &mActive) == 1) { mCblk->cv.signal(); mAudioRecord->stop(); // the record head position will reset to 0, so if a marker is set, we need // to activate it again mMarkerReached = false; if (t != 0) { t->requestExit(); } else { setpriority(PRIO_PROCESS, 0, ANDROID_PRIORITY_NORMAL); } AudioSystem::stopInput(mInput); } if (t != 0) { t->mLock.unlock(); } return NO_ERROR; } bool AudioRecord::stopped() const { return !mActive; } uint32_t AudioRecord::getSampleRate() { return mCblk->sampleRate; } status_t AudioRecord::setMarkerPosition(uint32_t marker) { if (mCbf == 0) return INVALID_OPERATION; mMarkerPosition = marker; mMarkerReached = false; return NO_ERROR; } status_t AudioRecord::getMarkerPosition(uint32_t *marker) { if (marker == 0) return BAD_VALUE; *marker = mMarkerPosition; return NO_ERROR; } status_t AudioRecord::setPositionUpdatePeriod(uint32_t updatePeriod) { if (mCbf == 0) return INVALID_OPERATION; uint32_t curPosition; getPosition(&curPosition); mNewPosition = curPosition + updatePeriod; mUpdatePeriod = updatePeriod; return NO_ERROR; } status_t AudioRecord::getPositionUpdatePeriod(uint32_t *updatePeriod) { if (updatePeriod == 0) return BAD_VALUE; *updatePeriod = mUpdatePeriod; return NO_ERROR; } status_t AudioRecord::getPosition(uint32_t *position) { if (position == 0) return BAD_VALUE; *position = mCblk->user; return NO_ERROR; } // ------------------------------------------------------------------------- status_t AudioRecord::obtainBuffer(Buffer* audioBuffer, int32_t waitCount) { int active; int timeout = 0; status_t result; audio_track_cblk_t* cblk = mCblk; uint32_t framesReq = audioBuffer->frameCount; uint32_t waitTimeMs = (waitCount < 0) ? cblk->bufferTimeoutMs : WAIT_PERIOD_MS; audioBuffer->frameCount = 0; audioBuffer->size = 0; uint32_t framesReady = cblk->framesReady(); if (framesReady == 0) { Mutex::Autolock _l(cblk->lock); goto start_loop_here; while (framesReady == 0) { active = mActive; if (UNLIKELY(!active)) return NO_MORE_BUFFERS; if (UNLIKELY(!waitCount)) return WOULD_BLOCK; timeout = 0; result = cblk->cv.waitRelative(cblk->lock, milliseconds(waitTimeMs)); if (__builtin_expect(result!=NO_ERROR, false)) { cblk->waitTimeMs += waitTimeMs; if (cblk->waitTimeMs >= cblk->bufferTimeoutMs) { LOGW( "obtainBuffer timed out (is the CPU pegged?) " "user=%08x, server=%08x", cblk->user, cblk->server); timeout = 1; cblk->waitTimeMs = 0; } if (--waitCount == 0) { return TIMED_OUT; } } // read the server count again start_loop_here: framesReady = cblk->framesReady(); } } LOGW_IF(timeout, "*** SERIOUS WARNING *** obtainBuffer() timed out " "but didn't need to be locked. We recovered, but " "this shouldn't happen (user=%08x, server=%08x)", cblk->user, cblk->server); cblk->waitTimeMs = 0; if (framesReq > framesReady) { framesReq = framesReady; } uint32_t u = cblk->user; uint32_t bufferEnd = cblk->userBase + cblk->frameCount; if (u + framesReq > bufferEnd) { framesReq = bufferEnd - u; } audioBuffer->flags = 0; audioBuffer->channelCount= mChannelCount; audioBuffer->format = mFormat; audioBuffer->frameCount = framesReq; audioBuffer->size = framesReq*cblk->frameSize; audioBuffer->raw = (int8_t*)cblk->buffer(u); active = mActive; return active ? status_t(NO_ERROR) : status_t(STOPPED); } void AudioRecord::releaseBuffer(Buffer* audioBuffer) { audio_track_cblk_t* cblk = mCblk; cblk->stepUser(audioBuffer->frameCount); } // ------------------------------------------------------------------------- ssize_t AudioRecord::read(void* buffer, size_t userSize) { ssize_t read = 0; Buffer audioBuffer; int8_t *dst = static_cast<int8_t*>(buffer); if (ssize_t(userSize) < 0) { // sanity-check. user is most-likely passing an error code. LOGE("AudioRecord::read(buffer=%p, size=%u (%d)", buffer, userSize, userSize); return BAD_VALUE; } LOGV("read size: %d", userSize); do { audioBuffer.frameCount = userSize/frameSize(); // Calling obtainBuffer() with a negative wait count causes // an (almost) infinite wait time. status_t err = obtainBuffer(&audioBuffer, -1); if (err < 0) { // out of buffers, return #bytes written if (err == status_t(NO_MORE_BUFFERS)) break; return ssize_t(err); } size_t bytesRead = audioBuffer.size; memcpy(dst, audioBuffer.i8, bytesRead); dst += bytesRead; userSize -= bytesRead; read += bytesRead; releaseBuffer(&audioBuffer); } while (userSize); return read; } // ------------------------------------------------------------------------- bool AudioRecord::processAudioBuffer(const sp<ClientRecordThread>& thread) { Buffer audioBuffer; uint32_t frames = mRemainingFrames; size_t readSize; // Manage marker callback if (!mMarkerReached && (mMarkerPosition > 0)) { if (mCblk->user >= mMarkerPosition) { mCbf(EVENT_MARKER, mUserData, (void *)&mMarkerPosition); mMarkerReached = true; } } // Manage new position callback if (mUpdatePeriod > 0) { while (mCblk->user >= mNewPosition) { mCbf(EVENT_NEW_POS, mUserData, (void *)&mNewPosition); mNewPosition += mUpdatePeriod; } } do { audioBuffer.frameCount = frames; // Calling obtainBuffer() with a wait count of 1 // limits wait time to WAIT_PERIOD_MS. This prevents from being // stuck here not being able to handle timed events (position, markers). status_t err = obtainBuffer(&audioBuffer, 1); if (err < NO_ERROR) { if (err != TIMED_OUT) { LOGE_IF(err != status_t(NO_MORE_BUFFERS), "Error obtaining an audio buffer, giving up."); return false; } break; } if (err == status_t(STOPPED)) return false; size_t reqSize = audioBuffer.size; mCbf(EVENT_MORE_DATA, mUserData, &audioBuffer); readSize = audioBuffer.size; // Sanity check on returned size if (ssize_t(readSize) <= 0) { // The callback is done filling buffers // Keep this thread going to handle timed events and // still try to get more data in intervals of WAIT_PERIOD_MS // but don't just loop and block the CPU, so wait usleep(WAIT_PERIOD_MS*1000); break; } if (readSize > reqSize) readSize = reqSize; audioBuffer.size = readSize; audioBuffer.frameCount = readSize/frameSize(); frames -= audioBuffer.frameCount; releaseBuffer(&audioBuffer); } while (frames); // Manage overrun callback if (mActive && (mCblk->framesAvailable_l() == 0)) { LOGV("Overrun user: %x, server: %x, flowControlFlag %d", mCblk->user, mCblk->server, mCblk->flowControlFlag); if (mCblk->flowControlFlag == 0) { mCbf(EVENT_OVERRUN, mUserData, 0); mCblk->flowControlFlag = 1; } } if (frames == 0) { mRemainingFrames = mNotificationFrames; } else { mRemainingFrames = frames; } return true; } // ========================================================================= AudioRecord::ClientRecordThread::ClientRecordThread(AudioRecord& receiver, bool bCanCallJava) : Thread(bCanCallJava), mReceiver(receiver) { } bool AudioRecord::ClientRecordThread::threadLoop() { return mReceiver.processAudioBuffer(this); } // ------------------------------------------------------------------------- }; // namespace android