/*
* Copyright 2001-2008 Texas Instruments - http://www.ti.com/
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* ======== cmm.h ========
* DSP-BIOS Bridge driver support functions for TI OMAP processors.
* Purpose:
* The Communication Memory Management(CMM) module provides shared memory
* management services for DSP/BIOS Bridge data streaming and messaging.
* Multiple shared memory segments can be registered with CMM. Memory is
* coelesced back to the appropriate pool when a buffer is freed.
*
* The CMM_Xlator[xxx] functions are used for node messaging and data
* streaming address translation to perform zero-copy inter-processor
* data transfer(GPP<->DSP). A "translator" object is created for a node or
* stream object that contains per thread virtual address information. This
* translator info is used at runtime to perform SM address translation
* to/from the DSP address space.
*
*
* Public Functions:
* CMM_CallocBuf
* CMM_Create
* CMM_Destroy
* CMM_Exit
* CMM_FreeBuf
* CMM_GetHandle
* CMM_GetInfo
* CMM_Init
* CMM_RegisterGPPSMSeg
* CMM_UnRegisterGPPSMSeg
* CMM_XlatorAllocBuf (Note #1 below)
* CMM_XlatorCreate "
* CMM_XlatorDelete "
* CMM_XlatorFreeBuf "
* CMM_XlatorTranslate "
*
*
* Notes:
* #1: Used by Node and Stream modules for SM address translation.
*
*! Revision History:
*! ================
*! 30-Jan-2002 ag Removed unused CMM_Alloc[Free]Desc & CMM_XlatorRegisterPa.
*! Renamed CMM_AllocBuf() to CMM_CallocBuf().
*! 29-Aug-2001 ag: Added dsp virt base and size to CMM_RegisterGPPSMSeg().
*! 12-Aug-2001 ag: Added CMM_UnRegisterGPP[DSP}SMSeg[s]().
*! 05-Dec-2000 ag: Added param to CMM_XlatorDelete() to force buf cleanup.
*! 30-Oct-2000 ag: Added conversion factor to CMM_RegisterDSP[GPP]SMSeg().
*! 12-Oct-2000 ag: Added CMM_Xlator[xxx] functions.
*! 10-Aug-2000 ag: Created.
*!
*/
#ifndef CMM_
#define CMM_
#ifdef __cplusplus
extern "C" {
#endif
#include <devdefs.h>
#include <dspapi.h>
#include <cmmdefs.h>
/*
* ======== CMM_CallocBuf ========
* Purpose:
* Allocate memory buffers that can be used for data streaming or
* messaging.
* Parameters:
* hCmmMgr: Cmm Mgr handle.
* uSize: Number of bytes to allocate.
* pAttr: Attributes of memory to allocate.
* ppBufVA: Address of where to place VA.
* Returns:
* Pointer to a zero'd block of SM memory;
* NULL if memory couldn't be allocated,
* or if cBytes == 0,
* Requires:
* Valid hCmmMgr.
* CMM initialized.
* Ensures:
* The returned pointer, if not NULL, points to a valid memory block of
* the size requested.
*
*/
extern PVOID CMM_CallocBuf(struct CMM_OBJECT* hCmmMgr,
UINT uSize, struct CMM_ATTRS * pAttrs,
OUT PVOID * ppBufVA);
/*
* ======== CMM_Create ========
* Purpose:
* Create a communication memory manager object.
* Parameters:
* phCmmMgr: Location to store a communication manager handle on output.
* hDevObject: Handle to a device object.
* pMgrAttrs: Comm mem manager attributes.
* Returns:
* DSP_SOK: Success;
* DSP_EMEMORY: Insufficient memory for requested resources.
* DSP_EFAIL: Failed to initialize critical sect sync object.
*
* Requires:
* CMM_Init() called.
* phCmmMgr != NULL.
* pMgrAttrs->ulMinBlockSize >= 4 bytes.
* Ensures:
*
*/
extern DSP_STATUS CMM_Create(OUT struct CMM_OBJECT** phCmmMgr,
struct DEV_OBJECT* hDevObject,
IN CONST struct CMM_MGRATTRS *pMgrAttrs);
/*
* ======== CMM_Destroy ========
* Purpose:
* Destroy the communication memory manager object.
* Parameters:
* hCmmMgr: Cmm Mgr handle.
* bForce: Force deallocation of all cmm memory immediately if set TRUE.
* If FALSE, and outstanding allocations will return DSP_EFAIL
* status.
* Returns:
* DSP_SOK: CMM object & resources deleted.
* DSP_EFAIL: Unable to free CMM object due to outstanding allocation.
* DSP_EHANDLE: Unable to free CMM due to bad handle.
* Requires:
* CMM is initialized.
* hCmmMgr != NULL.
* Ensures:
* Memory resources used by Cmm Mgr are freed.
*/
extern DSP_STATUS CMM_Destroy(struct CMM_OBJECT* hCmmMgr, bool bForce);
/*
* ======== CMM_Exit ========
* Purpose:
* Discontinue usage of module. Cleanup CMM module if CMM cRef reaches zero.
* Parameters:
* n/a
* Returns:
* n/a
* Requires:
* CMM is initialized.
* Ensures:
*/
extern VOID CMM_Exit();
/*
* ======== CMM_FreeBuf ========
* Purpose:
* Free the given buffer.
* Parameters:
* hCmmMgr: Cmm Mgr handle.
* pBuf: Pointer to memory allocated by CMM_CallocBuf().
* ulSegId: SM segment Id used in CMM_Calloc() attrs.
* Set to 0 to use default segment.
* Returns:
* DSP_SOK
* DSP_EFAIL
* Requires:
* CMM initialized.
* pBufPA != NULL
* Ensures:
*
*/
extern DSP_STATUS CMM_FreeBuf(struct CMM_OBJECT* hCmmMgr,
PVOID pBufPA, ULONG ulSegId);
/*
* ======== CMM_GetHandle ========
* Purpose:
* Return the handle to the cmm mgr for the given device obj.
* Parameters:
* hProcessor: Handle to a Processor.
* phCmmMgr: Location to store the shared memory mgr handle on output.
*
* Returns:
* DSP_SOK: Cmm Mgr opaque handle returned.
* DSP_EHANDLE: Invalid handle.
* Requires:
* phCmmMgr != NULL
* hDevObject != NULL
* Ensures:
*/
extern DSP_STATUS CMM_GetHandle(DSP_HPROCESSOR hProcessor,
OUT struct CMM_OBJECT** phCmmMgr);
/*
* ======== CMM_GetInfo ========
* Purpose:
* Return the current SM and VM utilization information.
* Parameters:
* hCmmMgr: Handle to a Cmm Mgr.
* pCmmInfo: Location to store the Cmm information on output.
*
* Returns:
* DSP_SOK: Success.
* DSP_EHANDLE: Invalid handle.
* DSP_EINVALIDARG Invalid input argument.
* Requires:
* Ensures:
*
*/
extern DSP_STATUS CMM_GetInfo(struct CMM_OBJECT* hCmmMgr,
OUT struct CMM_INFO * pCmmInfo);
/*
* ======== CMM_Init ========
* Purpose:
* Initializes private state of CMM module.
* Parameters:
* Returns:
* TRUE if initialized; FALSE if error occured.
* Requires:
* Ensures:
* CMM initialized.
*/
extern bool CMM_Init();
/*
* ======== CMM_KernConvert ========
* Purpose:
* Convert between Kernel Va & DSP Address.
* Used internally by Bridge.
* Parameters:
* hCmmMgr: Handle to a Cmm Mgr.
* pAddr Kernel or DSP address to convert.
* pAttrs Attrs contains segment ID.Default if NULL.
* xType Conversion type. CMM_KERNVA2DSP or CMM_DSP2KERNVA.
* Returns:
* NULL on failure. non-null on success.
* Requires:
* pAddr != NULL,
* ulSegId > 0,
* xType CMM_KERNVA2DSP | CMM_DSP2KERNVA.
* Ensures:
*
*/
extern PVOID CMM_KernConvert(struct CMM_OBJECT* hCmmMgr, PVOID pAddr,
struct CMM_ATTRS * pAttrs, CMM_KERNMAPTYPE xType);
/*
* ======== CMM_RegisterGPPSMSeg ========
* Purpose:
* Register a block of SM with the CMM.
* Parameters:
* hCmmMgr: Handle to a Cmm Mgr.
* lpGPPBasePA: GPP Base Physical address.
* ulSize: Size in GPP bytes.
* dwDSPAddrOffset GPP PA to DSP PA Offset.
* cFactor: Add offset if CMM_ADDTODSPPA, sub if CMM_SUBFROMDSPPA.
* dwDSPBase: DSP virtual base byte address.
* ulDSPSize: Size of DSP segment in bytes.
* pulSegId: Address to store segment Id.
*
* Returns:
* DSP_SOK: Success.
* DSP_EHANDLE: Invalid hCmmMgr handle.
* DSP_EINVALIDARG: Invalid input argument.
* DSP_EFAIL: Unable to register.
* - On success *pulSegId is a valid SM segment ID.
* Requires:
* ulSize > 0
* pulSegId != NULL
* dwGPPBasePA != 0
* cFactor = CMM_ADDTODSPPA || cFactor = CMM_SUBFROMDSPPA
* Ensures:
*
*/
extern DSP_STATUS CMM_RegisterGPPSMSeg(struct CMM_OBJECT* hCmmMgr,
DWORD dwGPPBasePA,
ULONG ulSize,
DWORD dwDSPAddrOffset,
CMM_CNVTTYPE cFactor,
DWORD dwDSPBase,
ULONG ulDSPSize,
ULONG * pulSegId,
DWORD dwGPPBaseBA);
/*
* ======== CMM_UnRegisterGPPSMSeg ========
* Purpose:
* Unregister the given memory segment that was previously registered
* by CMM_RegisterGPPSMSeg.
* Parameters:
* hCmmMgr: Handle to a Cmm Mgr.
* ulSegId Segment identifier returned by CMM_RegisterGPPSMSeg.
* Returns:
* DSP_SOK: Success.
* DSP_EHANDLE: Invalid handle.
* DSP_EINVALIDARG: Invalid ulSegId.
* DSP_EFAIL: Unable to unregister for unknown reason.
* Requires:
* Ensures:
*
*/
extern DSP_STATUS CMM_UnRegisterGPPSMSeg(struct CMM_OBJECT* hCmmMgr,
ULONG ulSegId);
/*
* ======== CMM_XlatorAllocBuf ========
* Purpose:
* Allocate the specified SM buffer and create a local memory descriptor.
* Place on the descriptor on the translator's HaQ (Host Alloc'd Queue).
* Parameters:
* hXlator: Handle to a Xlator object.
* pVaBuf: Virtual address ptr(client context)
* uPaSize: Size of SM memory to allocate.
* Returns:
* Ptr to valid physical address(Pa) of uPaSize bytes, NULL if failed.
* Requires:
* pVaBuf != 0.
* uPaSize != 0.
* Ensures:
*
*/
extern PVOID CMM_XlatorAllocBuf(struct CMM_XLATOROBJECT* hXlator,
PVOID pVaBuf, UINT uPaSize);
/*
* ======== CMM_XlatorCreate ========
* Purpose:
* Create a translator(xlator) object used for process specific Va<->Pa
* address translation. Node messaging and streams use this to perform
* inter-processor(GPP<->DSP) zero-copy data transfer.
* Parameters:
* phXlator: Address to place handle to a new Xlator handle.
* hCmmMgr: Handle to Cmm Mgr associated with this translator.
* pXlatorAttrs: Translator attributes used for the client NODE or STREAM.
* Returns:
* DSP_SOK: Success.
* DSP_EINVALIDARG: Bad input Attrs.
* DSP_EMEMORY: Insufficient memory(local) for requested resources.
* Requires:
* phXlator != NULL
* hCmmMgr != NULL
* pXlatorAttrs != NULL
* Ensures:
*
*/
extern DSP_STATUS CMM_XlatorCreate(OUT struct CMM_XLATOROBJECT** phXlator,
struct CMM_OBJECT* hCmmMgr,
struct CMM_XLATORATTRS *pXlatorAttrs);
/*
* ======== CMM_XlatorDelete ========
* Purpose:
* Delete translator resources
* Parameters:
* hXlator: handle to translator.
* bForce: bForce = TRUE will free XLators SM buffers/dscriptrs.
* Returns:
* DSP_SOK: Success.
* DSP_EHANDLE: Bad translator handle.
* DSP_EFAIL: Unable to free translator resources.
* Requires:
* cRefs > 0
* Ensures:
*
*/
extern DSP_STATUS CMM_XlatorDelete(struct CMM_XLATOROBJECT* hXlator,
bool bForce);
/*
* ======== CMM_XlatorFreeBuf ========
* Purpose:
* Free SM buffer and descriptor.
* Does not free client process VM.
* Parameters:
* hXlator: handle to translator.
* pBufVa Virtual address of PA to free.
* Returns:
* DSP_SOK: Success.
* DSP_EHANDLE: Bad translator handle.
* Requires:
* Ensures:
*
*/
extern DSP_STATUS CMM_XlatorFreeBuf(struct CMM_XLATOROBJECT* hXlator,
PVOID pBufVa);
/*
* ======== CMM_XlatorInfo ========
* Purpose:
* Set/Get process specific "translator" address info.
* This is used to perform fast virtaul address translation
* for shared memory buffers between the GPP and DSP.
* Parameters:
* hXlator: handle to translator.
* pAddr: Virtual base address of segment.
* ulSize: Size in bytes.
* uSegId: Segment identifier of SM segment(s)
* bSetInfo Set xlator fields if TRUE, else return base addr
* Returns:
* DSP_SOK: Success.
* DSP_EHANDLE: Bad translator handle.
* Requires:
* (cRefs > 0)
* (pAddr != NULL)
* (ulSize > 0)
* Ensures:
*
*/
extern DSP_STATUS CMM_XlatorInfo(struct CMM_XLATOROBJECT* hXlator,
IN OUT BYTE ** pAddr,
ULONG ulSize, UINT uSegId,
bool bSetInfo);
/*
* ======== CMM_XlatorTranslate ========
* Purpose:
* Perform address translation VA<->PA for the specified stream or
* message shared memory buffer.
* Parameters:
* hXlator: handle to translator.
* pAddr address of buffer to translate.
* xType Type of address xlation. CMM_PA2VA or CMM_VA2PA.
* Returns:
* Valid address on success, else NULL.
* Requires:
* cRefs > 0
* pAddr != NULL
* xType >= CMM_VA2PA) && (xType <= CMM_DSPPA2PA)
* Ensures:
*
*/
extern PVOID CMM_XlatorTranslate(struct CMM_XLATOROBJECT* hXlator,
PVOID pAddr, CMM_XLATETYPE xType);
#ifdef __cplusplus
}
#endif
#endif /* CMM_ */