2007-07-10 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.c (struct DBusConnection): Fix from Olivier
Hochreutiner to avoid trying to protect individual bits in a word
with different locks (make dispatch_acquired and io_path_acquired
dbus_bool_t rather than bitfields)
2006-12-12 John (J5) Palmieri <johnp@redhat.com>
* Released 1.0.2
2006-12-12 John (J5) Palmieri <johnp@redhat.com>
* bus/signal.c: Fix match_rule_equal errata
(CVE-2006-6107 - Patch from Kimmo Hämäläinen
<kimmo.hamalainen@nokia.com>)
2006-11-19 Thiago Macieira <thiago@kde.org>
* dbus/dbus-sysdeps-pthread.c (_dbus_pthread_mutex_lock,
_dbus_pthread_condvar_wait,
_dbus_pthread_condvar_wait_timeout): set pmutex->holder to
pthread_self() after coming back from a conditional variable
wait as well as in one codepath where it was forgotten.
Approved by: Havoc Pennington.
2006-11-17 Havoc Pennington <hp@redhat.com>
* update-dbus-docs.sh: allow setting fd.org username via env
variable. Make it run autogen with --enable-xml-docs=yes
--enable-doxygen-docs=yes so configure will fail if the required
tools are missing.
2006-11-17 Havoc Pennington <hp@redhat.com>
* doc/dbus-faq.xml: minor FAQ tweaks
2006-11-17 John (J5) Palmieri <johnp@redhat.com>
* Released 1.0.1
2006-11-14 Havoc Pennington <hp@redhat.com>
* dbus/dbus-misc.c, dbus/dbus-misc.h: Move
dbus_get_local_machine_id() to its own file, no substantive
changes. There are a couple other things we might want to add that
are "misc" so moving out of dbus-connection.[hc] which is big
enough already.
2006-11-14 Havoc Pennington <hp@redhat.com>
* dbus/dbus-internals.c (_dbus_generate_uuid): The spec said the
UUID had the timestamp last, but the implementation had it first;
move it to last since I think it's a tiny bit nicer (easier to
compare at a glance, faster to sort, less code), and will not
cause any practical compatibility problems. Also, always convert
the timestamp to big endian.
* doc/dbus-specification.xml: Clean up the docs on the UUID.
* tools/dbus-uuidgen.1: more prominently say it is not suitable
as a replacement for regular uuidgen/RFC4122.
2006-11-14 John (J5) Palmieri <johnp@redhat.com>
* configure.in: Bump version to 1.0.1 for next stable release
* dbus/dbus-threads.h: fix DBUS_THREAD_FUNCTIONS_ALL_MASK to have
the correct value so we don't assert when initalizing recursive threads
* test/name-test/test-thread-init.c: call dbus_threads_init_default
instead of _dbus_threads_init_debug since it is more of a real world
test
2006-11-09 John (J5) Palmieri <johnp@redhat.com>
* Released 1.0.0
2006-11-09 John (J5) Palmieri <johnp@redhat.com>
* AUTHORS: added Peter and Tor of windows porting fame
2006-11-08 Havoc Pennington <hp@redhat.com>
* doc/dbus-specification.xml: add a note about protocol stability
* doc/TODO: Remove "important for 1.0" section, replace with
"important for 1.2" section
2006-11-08 John (J5) Palmieri <johnp@redhat.com>
* README: remove some of the out of date flags
* doc/TODO: Remove todo items which are done
2006-11-08 John (J5) Palmieri <johnp@redhat.com>
* tools/dbus-monitor.c: Handle sigint so we flush stdout
(Patch from Olli Salli <olli dot salli at collabora dot co dot uk>)
2006-11-08 John (J5) Palmieri <johnp@redhat.com>
* tools/dbus-monitor.1: update the manpage for dbus-monitor
(Patch from Olli Salli <olli dot salli at collabora dot co dot uk>)
2006-11-08 John (J5) Palmieri <johnp@redhat.com>
* AUTHORS: Update with all people listed in the ChangeLog
2006-11-08 John (J5) Palmieri <johnp@redhat.com>
* tools/dbus-monitor.c: add profiling tools to dbus-monitor
(Patch from Olli Salli <olli dot salli at collabora dot co dot uk>)
2006-11-07 Havoc Pennington <hp@redhat.com>
* HACKING: Update release instructions to include stuff about
stable releases, branching, etc. May not be totally correct,
please fix if needed, but keep instructions up-to-date so we do
each stable release consistently in the future.
2006-11-07 Havoc Pennington <hp@redhat.com>
* doc/dbus-specification.xml, doc/dbus-faq.xml, README: various
documentation updates. Bump faq/spec versions (not to 1.0; I don't
think the spec will be "finished"/1.0 when we ship the 1.0 library).
2006-11-06 John (J5) Palmieri <johnp@redhat.com>
* bus/bus.c: Missed patch - pass in the context to the directory watch
2006-11-02 John (J5) Palmieri <johnp@redhat.com>
* Released D-Bus 1.0 RC 3(0.95)
2006-11-02 John (J5) Palmieri <johnp@redhat.com>
* bus/activation.c (bus_activation_new): don't fail if we can not read
the directory as it may not exist
2006-11-02 John (J5) Palmieri <johnp@redhat.com>
* bus/config-parser.c (service_dirs_find_dir): use
_dbus_list_get_next_link so we don't get stuck in an infinite loop
(start_busconfig_child): move processing of standard_session_servicedirs
tags here because they have no content
(bus_config_parser_content): check we don't have content in
standard_session_servicedirs tag
2006-11-02 John (J5) Palmieri <johnp@redhat.com>
* tools/Makefile.am: Make sure the /var/lib/dbus directory is created
Packagers need to own this directory
2006-11-02 John (J5) Palmieri <johnp@redhat.com>
* tools/run-with-tmp-session-bus.sh: fixed script to replace the
<standard_session_servicedirs> tag with a <sevicedir> tag that
points to the test service directory
2006-11-02 John (J5) Palmieri <johnp@redhat.com>
* configure.in: Add a check for DIR *dirp->dd_fd
* dbus/dbus-sysdeps-util-unix: if HAVE_DDFD is defined use
DIR *dirp->dd_fd else use DIR *dirp->__dd_fd. This takes care
of both Solaris and Irix
2006-11-01 Havoc Pennington <hp@redhat.com>
* bus/dbus-daemon.1.in: document standard_session_servicedirs
2006-11-01 John (J5) Palmieri <johnp@redhat.com>
* configure.in: expose DBUS_DATADIR
* bus/config-parser.c: add the standard_session_servicedirs element
to the parser
(bus_config_parser_content): process the standard_session_servicedirs
element by getting the standard directories from sysdeps and merging
them into the service directory list
(test_default_session_servicedirs): make sure we get what we expect
* bus/session.conf.in: replace the servicedir tag with the
standard_session_servicedirs tag
* dbus/dbus-list.h: remove the typedef of DBusList and place it in
dbus-sysdeps.h to avoid circular header dependencies
* dbus/dbus-sysdeps.h: add the typedef of DBusList
* dbus/dbus-sysdeps-unix.c (split_paths_and_append): utility function
which takes a string of directories delimited by colons, parses them
out, appends a suffix and puts them in a list ignoring empty elements
(_dbus_get_standard_session_servicedirs): returns the standard
directories for a session bus to look for service activation files
on Unix which includes the XDG_DATA_HOME, XDG_DATA_DIRS and
DBUS_DATADIR directories
* test/data/valid-config-files/many-rules.conf: add the
standard_session_servicedirs tag to the valid config file tests
2006-10-30 Havoc Pennington <hp@redhat.com>
* tools/dbus-launch.1, doc/TODO: capture intent to change the
command line options of dbus-launch a bit post 1.0
2006-10-27 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.c (dbus_connection_open_private): document
how to choose shared vs. private connections
2006-10-27 Havoc Pennington <hp@redhat.com>
* dbus/dbus-test.c: enclose more of the file in the
DBUS_BUILD_TESTS check.
* dbus/dbus-sysdeps-pthread.c (PTHREAD_CHECK): fix for
DBUS_DISABLE_ASSERT case.
* dbus/dbus-connection.c (dbus_connection_get_unix_user): document
that it only works on the server side
* dbus/dbus-bus.c: add a global lock covering the BusData we
attach to each connection
(internal_bus_get): lock our access to the BusData
(dbus_bus_register): lock the entire registration process
with _DBUS_LOCK(bus_datas). If we get the lock and
registration is already complete, silently return (vs. previous
behavior of aborting).
(dbus_bus_set_unique_name): lock the BusData
(dbus_bus_get_unique_name): lock the BusData
2006-10-27 John (J5) Palmieri <johnp@redhat.com>
* bus/config-parser.c (service_dirs_find_dir,
service_dirs_append_unique_or_free,
service_dirs_append_link_unique_or_free): New static methods
for only appending unique service directory names into
the service directory list
(merge_included, bus_config_parser_content): Only add unique
service directory names into the list
2006-10-27 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps-pthread.c: make the "count" and "holder"
variables volatile, suggested by Thiago. Document struct fields.
(PTHREAD_CHECK): remove pthread error checking if assertions are
disabled, should reduce the no-assertions case to the bare
minimum code.
2006-10-26 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps-pthread.c (_dbus_pthread_mutex_lock): change
to be recursive
(_dbus_pthread_mutex_unlock): make it recursive
(_dbus_pthread_condvar_wait): save/restore the recursion count
(_dbus_pthread_condvar_wait_timeout): save/restore the recursion count
2006-10-26 Havoc Pennington <hp@redhat.com>
* doc/dbus-specification.xml: clarify the UUID text slightly
* dbus/dbus-sysdeps-pthread.c: check for and mostly abort on
pthread errors. Add DBusMutexPThread and DBusCondVarPThread
in preparation for being able to extend them for e.g. recursive
mutexes.
2006-10-26 Havoc Pennington <hp@redhat.com>
* dbus/dbus-threads.[hc]: Documentation improvements. Clarify how
condition variables relate to recursive mutexes.
* dbus/dbus-sysdeps-pthread.c, dbus/dbus-sysdeps-win-thread.c,
dbus/dbus-threads.c: Split the platforms-specific thread
implementations into their own files.
* dbus/dbus-sysdeps-pthread.c
(_dbus_pthread_condvar_wait_timeout): invert the return value, it
was backward. Not that anything uses it.
2006-10-26 John (J5) Palmieri <johnp@redhat.com>
* dbus-sysdeps-unix.c (_dbus_set_local_creds): Clean up the
LOCAL_CREDS vs CMSGCRED stuff a bit. Prefer CMSGCRED. This
needs to be cleaned up more.
* doc/TODO: Add a todo that *BSD hackers should look at cleaning
up the CREDS issue.
2006-10-26 John (J5) Palmieri <johnp@redhat.com>
* configure.in, dbus-1.pc.in: Check to see if thread methods
are in glibc or libpthread and add -lpthread to the link stage
if it is the latter
2006-10-26 Thiago Macieira <thiago@kde.org>
* dbus/dbus-connection.c (_dbus_connection_open_internal): Fix
bug 8780: the connection lock is only required while recording
the shared connection, so protect only that code
section. Don't require connection_lookup_shared to return a
locked connection.
2006-10-26 Thiago Macieira <thiago@kde.org>
* tools/dbus-launch-x11.c (get_session_file, init_x_atoms):
check if get_machine_uuid() returns NULL before proceeding any
further: we can't init the X atoms or create a session file
name if there is no machine ID.
This solves a crash reported by some users if
--exit-with-session was used without --autolaunch=<machine-id>
2006-10-26 John (J5) Palmieri <johnp@redhat.com>
* tools/dbus-launch.c (main): run the dbus-daemon in the builddir
if tests are enabled and the DBUS_USE_TEST_BINARY env variable is set
* tools/run-with-tmp-session-bus.sh: set DBUS_USE_TEST_BINARY
before we run dbus-launch
* configure.in: define TEST_BUS_BINARY to be the full path to
dbus-daemon in the build root
2006-10-25 Sjoerd Simons <sjoerd@luon.net>
* dbus/Makefile.am:
* tools/Makefile.am:
* toos/dbus-uuidgen.1:
Move the machine-id file to /var/lib/dbus
2006-10-24 David Zeuthen <davidz@redhat.com>
* dbus/dbus-threads.c (init_uninitialized_locks): Fix typo so it's
_dbus_assert (thread_init_generation != _dbus_current_generation)
not _dbus_assert (thread_init_generation == _dbus_current_generation)
2006-10-24 Thiago Macieira <thiago@kde.org>
* dbus/dbus-sysdeps.h:
* dbus/dbus-sysdeps-unix.c: Add function
_dbus_make_file_world_readable that chmods a file to 0644.
* dbus/dbus-sysdeps-unix.c (_dbus_get_autolaunch_address):
Avoid writing to the static "argv" array, thereby avoiding a
COW on the child process.
* dbus/dbus-internals.c (_dbus_create_uuid_file_exclusively):
call _dbus_make_file_world_readable on the created file.
2006-10-23 David Zeuthen <davidz@redhat.com>
* dbus/dbus-memory.c: Use atomic variable to protect
n_blocks_outstanding otherwise OOM will be reported using SMP on
some arches
* bus/dispatch.c: Add missing end of line characters
* bus/desktop-file.c (parse_section_start, parse_key_value)
(bus_desktop_file_load): Propertly handle OOM
* dbus/dbus-threads.c (init_uninitialized_locks): Check that
thread_init_generation equals _dbus_current_generation, not 0
2006-10-22 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection-internal.h: move prototype of
_dbus_bus_notify_shared_connection_disconnected_unlocked() here so
it isn't in a public header and doesn't end up in the DBusBus
group in Doxygen
2006-10-21 Havoc Pennington <hp@redhat.com>
* Makefile.am (EXTRA_DIST): dist cleanup-man-pages.sh so it's in
the tarball if packagers want to run it
* cleanup-man-pages.sh: Add a script which munges all the internal
API man pages out of the Doxygen output. This reduces the size of
the installed man pages from 7 to 2 megs, and avoids
namespace-polluting pages. Right now (like Doxygen) this script
isn't in the build, it's something packagers can do manually.
2006-10-21 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.h: don't include the watch/timeout
functions in connection section
2006-10-21 Havoc Pennington <hp@redhat.com>
* Documentation! Whee! Doxygen now 100% silent. If you make it
angry again, you will be punished.
2006-10-21 Havoc Pennington <hp@redhat.com>
* More documentation - all public API now documented according to
Doxygen
2006-10-21 Havoc Pennington <hp@redhat.com>
* Document a bunch of undocumented stuff
2006-10-21 Havoc Pennington <hp@redhat.com>
* Clean up Doxygen group markers for public API so Doxygen finds
everything (not comprehensively fixed for private API).
Means all remaining Doxygen warnings are just about missing docs
and thus pretty simple to resolve.
2006-10-21 Havoc Pennington <hp@redhat.com>
* dbus/dbus-macros.h: add DBUS_GNUC_DEPRECATED macro
* dbus/dbus-message.h: mark dbus_message_iter_get_array_len()
as DBUS_GNUC_DEPRECATED
2006-10-21 Havoc Pennington <hp@redhat.com>
* Move all private API into the private Doxygen group sections of
the files, so they don't show up in the public API docs
2006-10-21 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.h: put #ifndef DBUS_DISABLE_DEPRECATED around
dbus_message_iter_get_array_len().
* throughout: documentation improvements.
2006-10-20 Havoc Pennington <hp@redhat.com>
* doc/TODO: remove the int64 thing from 1.0 since it doesn't
matter, and the message-loader-breaker thing since nobody is going
to do it. Add an item to 1.0 about supporting recursive locks
in dbus_threads_init_default() though, since it should be easy.
* dbus/dbus-connection.c (_dbus_connection_read_write_dispatch):
Fix this in the !dispatch case to avoid busy-looping after
disconnection
* More misc docs improvements
2006-10-19 Havoc Pennington <hp@redhat.com>
* more Doxygen-related fixes (lots of moving things from the
public to internal section in dbus-connection.c)
2006-10-19 Havoc Pennington <hp@redhat.com>
* Fix a pile of Doxygen warnings and missing docs
2006-10-19 John (J5) Palmieri <johnp@redhat.com>
* bus/dir-watch-default.c, bus/dir-watch-dnotify.c,
bus/dir-watch-kqueue.c (bus_watch_directory): Pass in a BusContext
instead of a void *. kqueue uses this to get the context's loop
while the other modules ignore the parameter. This allows us to
avoid platform conditionals
* bus/bus.c (process_config_postinit): Pass in the context to the
watch
2006-10-19 John (J5) Palmieri <johnp@redhat.com>
* bus/messagebus.in, bus/rc.messagebus.in: run dbus-uuidgen --ensure
when starting the system bus
2006-10-18 John (J5) Palmieri <johnp@redhat.com>
* configure.in: More fixups for cross compile (Patch from
Marco Pracucci <development at pracucci dot com>)
2006-10-17 Havoc Pennington <hp@redhat.com>
* tools/dbus-send.c (main): don't close shared connection, fix
from Timo Hoenig
2006-10-17 Havoc Pennington <hp@redhat.com>
* configure.in (CPPFLAGS): don't do -DDBUS_API_SUBJECT_TO_CHANGE here
* dbus/dbus.h: drop the DBUS_API_SUBJECT_TO_CHANGE requirement,
since realistically it doesn't look like we'll be changing it
anymore.
2006-10-17 Havoc Pennington <hp@redhat.com>
* dbus/dbus-internals.c (_dbus_warn_check_failed): new function to
be used for return_if_fail type warnings; prefixes the pid, and
fatal by default.
2006-10-14 John (J5) Palmieri <johnp@redhat.com>
* configure.in: Released 1.0 RC 2(0.94)
Add check for -fPIC and enable it if available
2006-10-14 John (J5) Palmieri <johnp@redhat.com>
* doc/TODO: Remove the check TODO item
2006-10-13 John (J5) Palmieri <johnp@redhat.com>
* dbus-transport-socket.c (exchange_credentials):
Print out more detailed errors if reading or sending
credentials fail (Patch from Julio M. Merino Vidal
<jmmv at NetBSD dot org>)
2006-10-13 John (J5) Palmieri <johnp@redhat.com>
* configure.in: when checking for posix getpwnam_r assume true
for cross compiles
2006-10-13 John (J5) Palmieri <johnp@redhat.com>
* configure.in: Check for gethostbyname first before we check for it
in libnsl. On gnu systems it is implemeneted
2006-10-13 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.c
(dbus_connection_send_with_reply_and_block): fix to handle closed
connections, from Tambet Ingo bug #8631
2006-10-11 John (J5) Palmieri <johnp@redhat.com>
* configure.in: use AC_TRY_COMPILE for dirfd instead of AC_TRY_RUN
2006-10-11 John (J5) Palmieri <johnp@redhat.com>
* test/name-test/Makefile.am: don't link against both libdbus and
libdbus-convenience
2006-10-11 John (J5) Palmieri <johnp@redhat.com>
* configure.in: check for dirfd even if it is a macro
(Patch from Timothy Redaelli <drizzt at gufi dot org>)
2006-10-08 John (J5) Palmieri <johnp@redhat.com>
* configure.in: define _POSIX_PTHREAD_SEMANTICS on solaris
avoid using dirfd on systems that don't have dirfd
(Patch by Brian Cameron <brian dot cameron at sun dot com>)
2006-10-02 John (J5) Palmieir <johnp@redhat.com>
* dbus/dbus-sysdeps.c (_dbus_abort): Remove from
#ifndef DBUS_DISABLE_ASSERTS macro to fix distcheck
* dbus/dbus-sysdeps-unix.c (_dbus_print_backtrace): Remove from
#if !defined (DBUS_DISABLE_ASSERT) || defined(DBUS_BUILD_TESTS)
macro because _dbus_abort calls it
* tools/Makefile.am: Add dbus-launch.h to the source list so distcheck
works
2006-10-02 John (J5) Palmieir <johnp@redhat.com>
* dbus/dbus-sysdeps-util-unix.c (dirent_buf_size): Add check for
MAXNAMELEN for Mac OSX. (Patch from Jonas B <sanoix at gmail dot com>)
2006-10-02 Thiago Macieira <thiago@kde.org>
* tools/dbus-launch.c (main): make it complain and abort
execution in case an unknown option is given. Also, process
the '--' argument as the end of arguments.
2006-10-01 Havoc Pennington <hp@redhat.com>
* tools/dbus-launch.c (print_variables): if no syntax is given,
don't print something that's sort-of-half-sh-syntax, just print
a plain key-value pairs thing.
* tools/dbus-launch-x11.c: use machine ID rather than hostname for
the local machine representation (but still have the hostname in
the display). Remove the hostname from the display if it is
localhost. Change session files to be named
~/.dbus/session-bus/machine-display. Change X atoms to be
underscore-prefixed so nobody whines about ICCCM compliance.
Otherwise name them the same as the env variables.
Change session file format to include key-value pairs and an
explanatory comment. Keys are the same as the env variables.
(set_address_in_x11): X property format can't depend on
sizeof(pid_t) on a particular machine, fix to always be 32 bits
* tools/dbus-launch.c: make --autolaunch take a machine id
argument. If --autolaunch is used with a program to run, complain
for now (but add a FIXME). Also, don't look for existing bus if
there's a program to run (but add a FIXME).
* dbus/dbus-sysdeps-unix.c (_dbus_get_autolaunch_address): pass
machine uuid to dbus-launch (avoids linking dbus-launch to libdbus
just to get this, and avoids duplicating uuid-reading code).
* tools/dbus-launch.1: clarify various things
2006-10-01 Havoc Pennington <hp@redhat.com>
* test/test-service.c (path_message_func): remove broken extra
unref that was hidden by the bugs in dbus-connection.c/dbus-bus.c
* test/test-shell-service.c (path_message_func): same fix
* dbus/dbus-connection.c
(_dbus_connection_get_dispatch_status_unlocked): break up the
function a little for clarity and fix the notification of
dbus-bus.c to not require dispatch to be complete
* dbus/dbus-connection.c (dbus_connection_unref): improve the
warning when you try to finalize an open connection.
2006-10-01 Havoc Pennington <hp@redhat.com>
* dbus/dbus-bus.c
(internal_bus_get): only weak ref the connection; this means
_dbus_bus_notify_shared_connection_disconnected_unlocked can be
called safely in any context
(_dbus_bus_notify_shared_connection_disconnected_unlocked): don't
unref
* dbus/dbus-connection.c
(_dbus_connection_get_dispatch_status_unlocked): move
_dbus_bus_notify_shared_connection_disconnected_unlocked here
when queuing Disconnected instead of when the Disconnected message
arrives, so dbus_bus_get() won't return closed connections.
2006-10-01 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.c (_dbus_connection_close_if_only_one_ref):
Add a hack to make DBusNewConnectionFunction work right.
* dbus/dbus-server-socket.c (handle_new_client_fd_and_unlock): use
the hack here. Also, fix the todo about refcount leak.
* dbus/dbus-server-debug-pipe.c (_dbus_transport_debug_pipe_new):
and use the hack here
* dbus/dbus-connection.c: Kill the "shared" flag vs. the
"shareable" flag; this was completely broken, since it meant
dbus_connection_open() returned a connection of unknown
shared-ness. Now, we always hold a ref on anything opened
as shareable.
Move the call to notify dbus-bus.c into
connection_forget_shared_unlocked, so libdbus consistently forgets
all its knowledge of a connection at once. This exposed numerous
places where things were totally broken if we dropped a ref inside
get_dispatch_status_unlocked where
connection_forget_shared_unlocked was previously, so move
connection_forget_shared_unlocked into
_dbus_connection_update_dispatch_status_and_unlock. Also move the
exit_on_disconnect here.
(shared_connections_shutdown): this assumed weak refs to the
shared connections; since we have strong refs now, the assertion
was failing and stuff was left in the hash. Fix it to close
still-open shared connections.
* bus/dispatch.c: fixup to use dbus_connection_open_private on the
debug pipe connections
* dbus/dbus-connection.c (dbus_connection_dispatch): only notify
dbus-bus.c if the closed connection is in fact shared
(_dbus_connection_close_possibly_shared): rename from
_dbus_connection_close_internal
(dbus_connection_close, dbus_connection_open,
dbus_connection_open_private): Improve docs to explain the deal
with when you should close or unref or both
* dbus/dbus-bus.c
(_dbus_bus_notify_shared_connection_disconnected_unlocked): rename
from _dbus_bus_check_connection_and_unref_unlocked and modify to
loop over all connections
* test/test-utils.c (test_connection_shutdown): don't try to close
shared connections.
* test/name-test/test-threads-init.c (main): fix warnings in here
* dbus/dbus-sysdeps.c (_dbus_abort): support DBUS_BLOCK_ON_ABORT
env variable to cause blocking waiting for gdb; drop
DBUS_PRINT_BACKTRACE and just call _dbus_print_backtrace()
unconditionally.
* configure.in: add -export-dynamic to libtool flags if assertions enabled
so _dbus_print_backtrace works.
* dbus/dbus-sysdeps-unix.c (_dbus_print_backtrace): use fprintf
instead of _dbus_verbose to print the backtrace, and diagnose lack
of -rdynamic/-export-dynamic
2006-09-30 Havoc Pennington <hp@redhat.com>
* dbus/dbus-bus.c (dbus_bus_get_private, dbus_bus_get)
(internal_bus_get): fix screwy code formatting. whoever committed
that was not paying attention!
2006-09-30 Havoc Pennington <hp@redhat.com>
* configure.in (LT_CURRENT, LT_AGE): increment current and age to
reflect addition of interfaces.
* doc/dbus-specification.xml: describe a new
org.freedesktop.DBus.Peer.GetMachineId method
* dbus/dbus-string.c (_dbus_string_skip_white_reverse): new function
(_dbus_string_skip_white, _dbus_string_skip_blank): use new
DBUS_IS_ASCII_BLANK, DBUS_IS_ASCII_WHITE macros and fix assertion
at end of skip_white
(_dbus_string_chop_white): new function
* bus/connection.c (bus_connections_setup_connection): call
dbus_connection_set_route_peer_messages.
* dbus/dbus-connection.c
(_dbus_connection_peer_filter_unlocked_no_update): modify to
support a GetMachineId method.
Also, support a new flag to let the bus pass peer methods through
to apps on the bus, which can be set with
dbus_connection_set_route_peer_messages.
Finally, handle and return an error for anything unknown on the
Peer interface, which will allow us to extend the Peer interface
in the future without fear that we're now intercepting something
apps were wanting to see.
* tools/dbus-uuidgen.c: a thin wrapper around the functions in
dbus/dbus-uuidgen.c
* dbus/dbus-uuidgen.c: implement the bulk of the dbus-uuidgen
binary here, since most of the code is already in libdbus
* dbus/dbus-sysdeps.c (_dbus_read_local_machine_uuid): read the
uuid from the system config file
* dbus/dbus-internals.c (_dbus_generate_uuid, _dbus_uuid_encode)
(_dbus_read_uuid_file_without_creating)
(_dbus_create_uuid_file_exclusively, _dbus_read_uuid_file): new
uuid-related functions, partly factored out from dbus-server.c
* dbus/dbus-sysdeps.c (_dbus_error_from_errno): convert EEXIST to
DBUS_ERROR_FILE_EXISTS instead of EEXIST
* dbus/dbus-protocol.h (DBUS_ERROR_FILE_EXISTS): add file exists error
* tools/dbus-cleanup-sockets.1: explain what the point of this
thing is a bit more
* autogen.sh (run_configure): add --config-cache to default
configure args
* dbus/dbus-internals.h (_DBUS_ASSERT_ERROR_IS_SET): disable the
error set/clear assertions when DBUS_DISABLE_CHECKS is defined
* tools/dbus-launch.c (main): if xdisplay hasn't been opened,
don't try to save address, fixes crash in make check
2006-09-30 Thiago Macieira <thiago@kde.org>
* configure.in: add DBUS_BINDIR as a #define to C source code.
* tools/dbus-launch.c
* tools/dbus-launch.h
* tools/dbus-launch-x11.c:
* tools/dbus-launch.1: Add the --autolaunch option to
dbus-launch, which makes it scan for an existing session
started with --autolaunch. With that option, it also creates
an X11 window and saves the bus address and PID to it.
* dbus/dbus-sysdeps.h:
* dbus/dbus-sysdeps-unix.c (_dbus_get_autolaunch_address): Add
a function that runs "dbus-launch --autolaunch" to retrieve
the running D-Bus session address (or start one if none was running)
* dbus/dbus-transport.c: Add the handler for the "autolaunch:"
address protocol, which tries to get the running session from
dbus-launch.
* dbus/dbus-bus.c:
* dbus/dbus-internals.h: Make "autolaunch:" be the default
D-Bus session bus address.
* dbus/dbus-connection.c: Fix horrible typo in error message.
2006-09-18 John (J5) Palmieri <johnp@redhat.com>
* tools/Makefile.am: use @EXPANDED_DATADIR@ instead of @DATADIRNAME@
2006-09-17 Havoc Pennington <hp@redhat.com>
* dbus/dbus-transport.c (_dbus_transport_get_is_authenticated):
fix so that if unix_user_function is set on windows, we still
do the default check that the auth identity matches the bus identity
2006-09-16 Havoc Pennington <hp@redhat.com>
* dbus/dbus-transport.c (_dbus_transport_open): modify to delegate
to _dbus_transport_open_platform_specific,
_dbus_transport_open_socket,
and _dbus_transport_open_debug_pipe
* dbus/dbus-transport-protected.h: add _dbus_transport_open_platform_specific
2006-09-16 Havoc Pennington <hp@redhat.com>
Attempt auditing public API to remove all cases where a Unix
function returns weird emulated goo to Windows. This probably
breaks the bus daemon on Windows, to fix it again we may
need to stop processing unix-specific config options on Windows,
and may need to add Windows-specific public API or config options.
* configure.in (LT_CURRENT, LT_AGE): increment current and age,
to reflect added interfaces; should not break soname.
* dbus/dbus-transport.c (_dbus_transport_get_is_authenticated): do
not invoke unix user function on Windows. Kind of a hacky fix, but
we don't want a "unix uid" leaking out on Windows.
* dbus/dbus-connection.c (dbus_connection_get_socket): add new API
to get the socket fd on Windows or UNIX
(dbus_connection_get_unix_fd): make this always fail on Windows
2006-09-16 Havoc Pennington <hp@redhat.com>
* dbus/dbus-server.c (dbus_server_listen): change how this works
to be able to delegate to a set of handlers that can succeed,
fail, or choose not to handle. Allows us to have
dbus_server_listen_platform_specific.
* dbus/dbus-server-socket.c (_dbus_server_new_for_tcp_socket):
factor out the tcp socket stuff to be used on windows, leaving
unix domain socket only in dbus-socket-unix.c
* dbus/dbus-transport-socket.c
(_dbus_transport_new_for_tcp_socket): factor out the tcp socket
stuff to be used on windows, leaving unix domain socket only
in dbus-transport-unix.c
* dbus/dbus-connection.c (dbus_connection_get_unix_user): insert
temporary hack to be sure this fails on windows
(dbus_connection_get_unix_process_id): ditto
2006-09-16 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps-unix.c (_dbus_open_tcp_socket)
(_dbus_open_unix_socket, _dbus_open_socket): change API for
_dbus_open_socket so the domain/type/protocol from system headers
are not required. This is kind of pointless though unless we move
part of _dbus_connect_tcp_socket into sysdeps.c instead of
sysdeps-unix.c, which would mean adding a wrapper around
bind/listen/etc.
Also, add DBusError to the socket-opening functions so they
don't require use of errno.
2006-09-16 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps-unix.h: small change to Peter's patch to make
dbus-sysdeps-unix-util.c build, add unix-specific sysdeps header.
* dbus/dbus-sysdeps.h, dbus-sysdeps-unix.c: patch from Peter
Kümmel bug #8249 to make the sysdeps.h read/write/open/close
functions specifically for sockets only, and move generic
read/write/open/close into unix-specific code.
2006-09-14 Havoc Pennington <hp@redhat.com>
* dbus/dbus-transport-unix.c (unix_do_iteration): fix a valgrind
complaint about accessing revents when poll returns 0, from Julian Seward.
2006-09-14 John (J5) Palmieri <johnp@redhat.com>
* Released 1.0 RC 1 (0.93)
2006-09-14 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-sysdeps-util-unix.c (_dbus_write_pid_file):
use _dbus_close instead of close
2006-09-14 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-sysdeps.c: Add support for LOCAL_CREDS socket
credentials. Fixes "external" authentication under e.g. NetBSD
which does not support any other socket credentials mechanism.
(Patch from Julio M. Merino Vidal <jmmv at NetBSD dot org>)
2006-09-14 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-threads.c: Allow recursive mutex's to be passed into
dbus_threads_init and be used by the dbus mutex functions to
avoid deadlocks.
* doc/TODO: Remove recursive mutex dbus_connection_dispatch TODO item
2006-09-13 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-sysdeps-util-unix.c (_dbus_directory_get_next_file):
use threadsafe readdir_r instead of readdir
2006-09-13 John (J5) Palmieri <johnp@redhat.com>
* dbus-threads.c (dbus_threads_init_default): New method for
initializing the internal thread implementation (Patch from
Alexander Larsson <alexl at redhat dot com>)
2006-09-11 John (J5) Palmieri <johnp@redhat.com>
* remove a bunch of todo items from the 1.0 list
2006-09-11 John (J5) Palmieri <johnp@redhat.com>
* bus/activation.c, bus/desktop-file.c: Distinguish between OOM and
key not found
2006-09-11 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-internal.c: Add dbus_is_verbose so we can have more
complex debugging code
* dbus/dbus-marshal-basic.c (_dbus_marshal_read_fixed_multi): Move
between the test suite ifdefs
(_dbus_verbose_bytes): return if verbosity is not enabled
2006-09-11 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-marshal-recursive-util.c, dbus/dbus-marshal-recursive.c:
remove DBusMark
2006-09-10 Havoc Pennington <hp@redhat.com>
patch mostly by Peter Kümmel, bug #8211
* dbus/dbus-sysdeps-unix.c: new file, which splits out
unix-specific stuff in dbus-sysdeps.c
* dbus/dbus-sysdeps.c: don't include any UNIX-only headers,
and move unix-specific stuff to dbus-sysdeps-unix.c
* configure.in: check HAVE_ERRNO_H
2006-09-08 John (J5) Palmieri <johnp@redhat.com>
* bus/test-main.c (main): Initialize threading during tests
* dbus/dbus-connection.c (_dbus_connection_new_for_transport):
Unlock connection on error
(generate_local_error_message): static method for generating
an error message when we don't have a message to reply to
(_dbus_connection_block_pending_call): Send a disconnect error
instead of just a timeout (NULL) when the bus gets disconnected
while blocking for a reply.
2006-09-08 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-connection.c (dbus_connection_dispatch): Properly remove
filters (Patch from Kimmo Hämäläinen
<kimmo dot hamalainen at nokia dot com>)
2006-09-07 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-connection-internal.h: Add prototype for
_dbus_connection_test_get_locks to remove warning
2006-09-07 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-spawn.c (_dbus_spawn_async_with_babysitter): Make sure we
close child_err_report_pipe[WRITE_END] on exec (Patch from
Kimmo Hämäläinen <kimmo dot hamalainen at nokia dot com>)
2006-09-07 John (J5) Palmieri <johnp@redhat.com>
* Clean up close calls to use _dbus_close (Patch from
Kimmo Hämäläinen <kimmo dot hamalainen at nokia dot com>)
2006-09-06 John (J5) Palmieri <johnp@redhat.com>
* doc/TODO:
- Remove pending call locking todo item
- dbus_connection_open now holds hard ref. Remove todo item
- do proper locking on _dbus_bus_check_connection_and_unref
and handle DBUS_BUS_STARTER. Remove todo item
- Warn on closing of a shared connection. Remove todo item
* bus/bus.c, bus/connection.c, bus/dispatch.c, dbus/dbus-bus.c,
dbus/dbus-connection.c: Use the dbus_connection_close_internal
so we don't get the warning when closing shared connections
* test/test-service.c, test/test-shell-service.c: Applications
don't close shared connections themselves so we unref instead of
close
* test/test-utils.c (test_connection_shutdown): Close the connection
* dbus/dbus-bus.c (_dbus_bus_check_connection_and_unref): Changed to
_dbus_bus_check_connection_and_unref_unlocked since we only call this
method on a locked connection.
Make sure we call _dbus_connection_unref_unlocked instead of
dbus_connection_unref also.
Handle DBUS_BUS_STARTER correctly
* dbus/dbus-connection.c (connection_record_shared_unlocked):
Mark as shared and hard ref the connection
(connection_forget_shared_unlocked): Remove the hard ref from the
connection
(_dbus_connection_close_internal_and_unlock): New internal function
which takes a locked connection and unlocks it after closing it
(_dbus_connection_close_internal): New internal function which acts
like the origonal dbus_connection_close method by grabbing a connection
lock and calling _dbus_connection_close_internal_and_unlock
(dbus_connection_close): Public close method, warns when the app
trys to close a shared connection
2006-09-06 John (J5) Palmieri <johnp@redhat.com>
* bus/driver.c:
(bus_driver_generate_introspect_string): New method for populating
a DBusString with the introspect data
(bus_driver_handle_introspect): Move introspect generation code to
bus_driver_generate_introspect_string
* bus/main.c:
(introspect): New function which prints out the intropect data and
exits
(main): Add a --introspect switch
2006-09-06 John (J5) Palmieri <johnp@redhat.com>
* doc/TODO: Removed dtd publishing item.
It seems the dtd has already been added at
http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd
2006-09-05 John (J5) Palmieri <johnp@redhat.com>
* doc/TODO, various source files: Audited todo's and FIXME's and
prepended the ones we should be looking at with 1.0. Those
prepended with 1.0? need clerification or might not be needed
for 1.0
2006-09-05 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-pending-call.c: Add some checks so we don't crash on
NULL in the public API (Patch from Kimmo Hämäläinen
<kimmo dot hamalainen at nokia dot com>)
2006-09-05 John (J5) Palmieri <johnp@redhat.com>
* configure.in: Fix for OS-X compile time endian issues (patch from
Benjamin Reed <ranger at befunk dot com>)
2006-09-05 John (J5) Palmieri <johnp@redhat.com>
* configure.in: Check for no-common compiler flag (OS-X fix from
Benjamin Reed <ranger at befunk dot com>)
2006-09-01 John (J5) Palmieri <johnp@redhat.com>
* tools/dbus-launch.c: Add a sigterm handler (patch from Frederic Crozat
<fcrozat at mandriva dot com>)
2006-08-29 Havoc Pennington <hp@redhat.com>
* test/test-service.c (path_message_func): fix lack of return value
* dbus/dbus-sysdeps.c (_dbus_printf_string_upper_bound): fix
formatting, remove #ifdef, and fix docs. #ifdef doesn't make
any more sense than on anything else in this file.
(_dbus_get_tmpdir): add const to return value, and keep the
results of the various getenv around in a static variable.
2006-08-29 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps-util.c, dbus/dbus-sysdeps-util-unix.c: change
from Ralf Habacker to move UNIX-specific sysdeps into a separate file.
2006-08-25 John (J5) Palmieri <johnp@redhat.com>
* test/Makefile.am: change find to use syntax that works with non
gnu versions of find
2006-08-25 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-transport.c: fix invalid deref when checking if
a vtable method exists (Patch from Christian Ehrlicher
<ch dot ehrlicher at gmx dot de>)
2006-08-25 John (J5) Palmieri <johnp@redhat.com>
* configure.in, dbus/Makefile.am, test/name-test/run-test.sh,
test/name-test/Makefile.am: Fixed some issues with getting get dbus
to build with builddir != srcdir (Taken from a patch by Bernard Leak
<bernard at brenda-arkle dot demon dot co dot uk>)
2006-08-25 John (J5) Palmieri <johnp@redhat.com>
* configure.in: Fix DBUS_DAEMONDIR to use EXPANDED_BINDIR for the
default case
2006-08-25 John (J5) Palmieri <johnp@redhat.com>
* configure.ac, bus/Makefile.am: Generalize kqueue support so that
it works on any system providing this interface, not only FreeBSD.
For example, NetBSD. (Patch by Julio M. Merino Vidal <jmmv at NetBSD dot org>)
2006-08-20 Havoc Pennington <hp@redhat.com>
* doc/dbus-faq.xml, doc/dbus-tutorial.xml: some improvements to
the docs
2006-08-18 John (J5) Palmieri <johnp@redhat.com>
* Released 0.92
2006-08-18 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-threads.c (dbus_threads_init): change the documentation
to reflect the init late change
* bus/bus.c (bus_context_new): Check user before we fork so we can
print out an error message a user will be able to see
2006-08-18 John (J5) Palmieri <johnp@redhat.com>
Patch provided by Ralf Habacker (ralf dot habacker at freenet dot de)
* dbus/dbus-sysdeps.c, dbus/dbus-threads.c, dbus/dbus-internals.h:
Add two more global locks for use on windows platforms. These are
unused on non-windows platforms but are not ifdefed out to avoid
potential bugs (i.e. the few bytes lost does not warrent the extra
maintanence and complexity that having seperate sets of locks would
cause)
2006-08-18 John (J5) Palmieri <johnp@redhat.com>
* bus/services.c (bus_registry_acquire_service): Return an error
when an application tries to register the org.freedesktop.DBus Bus Name
* bus/services.c (bus_registry_release_service): Return an error
when an application tries to release the org.freedesktop.DBus Bus Name
2006-08-17 Alp Toker <alp@atoker.com>
* doc/dbus-specification.xml: Fix some minor typos.
2006-08-17 John (J5) Palmieri <johnp@redhat.com>
* configure.in: use $with_init_scripts instead of $operating_system
to determine where to store the pid since the init scripts manipulate
the pid file (patch from Marcelo Ricardo Leitner
<marcelo dot leitner at terra dot com dot br>.
2006-08-16 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-threads.c: Add static DBusList *uninitialized_mutex_list and
static DBusList *uninitialized_condvar_list to support new late
initialization threading model. In this model threads can be initialized
even after the D-Bus API has been used but still needs to be initialized
before the second thread has been started. Mutexes and condvar addresses
are stored in the two static lists and are replaced with actuall locks
when threads are initalized.
(_dbus_mutex_new_at_location): New method for creating a mutex and placing
the location into the static list
(_dbus_mutex_free_at_location): New method for removing a mutex location
from the static list and freeing the mutex
(_dbus_condvar_new_at_location): New method for creating a conditional
variable and placing the location into the static list
(_dbus_condvar_free_at_location): New method for removing a conditional
variable location from the static list and freeing the conditional variable
(init_uninitialized_locks): Atomic method which goes through the static
lists of mutex and condvar location and updates them with actuall locks
(init_global_locks): changed to init_locks
* dbus/dbus-connection.c:
(_dbus_connection_test_get_locks): New method for tests to check connections
(_dbus_connection_new_for_transport): Use the new at_location mutex and
condvar API
(dbus_connection_allocate_data_slot): Pass in the global lock address
to _dbus_data_slot_allocator_alloc
* dbus/dbus-dataslot.c:
(_dbus_data_slot_allocator_alloc): Use the address of the mutex
instead of the mutex itself
* dbus/dbus-message.c:
(dbus_message_allocate_data_slot): Pass in the global lock address
to _dbus_data_slot_allocator_alloc
* dbus/dbus-pending-call.c:
(dbus_pending_call_allocate_data_slot): Pass in the global lock address
to _dbus_data_slot_allocator_alloc
* dbus/dbus-server.c:
(_dbus_server_init_base): Use the new at_location mutex API
(dbus_server_allocate_data_slot): Pass in the global lock address
to _dbus_data_slot_allocator_alloc
* test/name-test/test-threads-init.c: New test case for late thread
initialization
2006-08-14 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-dataslot.c (_dbus_data_slot_allocator_alloc):
Change _dbus_abort to _dbus_assert_not_reached because _dbus_abort
causes compile problems when asserts are turned off
Keeping _dbus_warn for printing out the message so even if
asserts are turned off the user gets the messages that something is
wrong
2006-08-14 John (J5) Palmieri <johnp@redhat.com>
Patches by Kjartan Maraas <kmaraas at gnome dot org>
* bus/services.c (bus_service_list_queued_owners):
Add a pointer cast to fix compiler warning
* dbus/dbus-dataslot.c (_dbus_data_slot_list_get):
return a NULL instead of FALSE since the return type
is not expecting a boolean
* dbus/dbus-marshal-basic.c (_dbus_marshal_test):
Remove unused variable
* dbus/dbus-marshal-recursive-util.c (node_new):
return a NULL instead of FALSE since the return type
is not expecting a boolean
* dbus/dbus-server-debug-pipe.c (_dbus_transport_debug_pipe_new):
Send a NULL into _dbus_transport_new_for_fd instead of a FALSE
because we are expecting a pointer not a boolean
* dbus/dbus-sysdeps-util.c (_dbus_get_tmpdir):
add void as the parameter so some compilers
don't complain
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_domain_socket,
_dbus_transport_new_for_tcp_socket):
Send a NULL into _dbus_transport_new_for_fd instead of a FALSE
because we are expecting a pointer not a boolean
* test/shell-test.c (test_command_line):
cast the second argument to _dbus_list_append to avoid compiler
warnings
* test/test-names.c (main): remove unused variable
* test/test-service.c (check_hello_from_self_reply):
Initialize echo_message and echo_reply to NULL
* test/test-shell-service.c (handle_echo):
Remove unused variable and cast the third parameter passed to
dbus_connection_get_object_path_data to avoid compiler warrnings
* test/name-test/test-names.c (clear_message_queue):
Remove unused function
* test/name-test/test-pending-call-dispatch.c:
Fix format string in printf
2006-08-14 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-bus.c:
* test/name-test/test-names.c:
Remove test method dbus_bus_connection_get_unique_name because
we already have public method dbus_bus_get_unique_name that
does the exact same thing
2006-08-10 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-signature.c:
fix typos in Julio's previous patch which cause make check to fail
2006-08-10 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-address.c (_dbus_address_test): Revert leaking strcmp.
In any case it was wrong since this is a test checking to see if
address parsing is correct. There was no need to get the true
tmp directory.
2006-08-10 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-macros.h: Revert the addition of stddef.h
as we should not be adding it to library headers
2006-08-10 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-signature.c:
Fix the unit tests so that they work if assertions are not enabled.
(patch from Julio M. Merino Vidal <jmmv at NetBSD dot org>)
2006-08-10 John (J5) Palmieri <johnp@redhat.com>
* tools/run-with-tmp-session-bus.sh:
* test/name-test/run-test.sh:
Remove bashisms (patch from Julio M. Merino Vidal
<jmmv at NetBSD dot org>)
2006-08-10 John (J5) Palmieri <johnp@redhat.com>
* configure.in: add a version (>= 2.6.0) check for libxml2
2006-08-10 John (J5) Palmieri <johnp@redhat.com>
* configure.in: make sure the compiler supports -Wfloat-equal
* bus/dir-watch-dnotify.c: move functional code after
variable declerations (C99 fix) (patches from Jens Granseuer
<jensgr at gmx dot net>
2006-08-10 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-macros.h:
add #include <stddef.h> so that Sun compilers don't complain about
the defining NULL
2006-08-10 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-sysdeps.c:
* dbus/dbus-address.c:
* bus/activation.c:
* test/shell-test.c:
don't hardcode tmp directory (patch from Dave Meikle
<dmk at davemeikle dot co dot uk>)
2006-08-09 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-dataslot.c (_dbus_data_slot_allocator_alloc):
Change an assert to a detailed warning and abort.
When allocator->lock != mutex it indicates that the user has failed
to initalize threads before using the D-Bus library. This warning
helps the user identify the issue and fix their app.
2006-08-08 John (J5) Palmieri <johnp@redhat.com>
These are all patches from Kjartan Maraas <kmaraas at gnome dot org>
with cleanups of bugs found from Coverity reports:
* dbus/dbus-sysdeps-util.c (_dbus_write_pid_file):
close the file on error to avoid a leak
* bus/expirelist.c (bus_expire_list_test):
Check for NULL on dbus_new0
* bus/activation.c (update_directory):
remove dead code
* bus/config-parser.c (merge_service_context_hash, start_selinux_child):
Fix some leaks
* bus/bus.c (process_config_every_time):
Fixed a leak
* bus/desktop-file.c (parse_key_value):
Fixed leak
* bus/selinux.c (bus_selinux_id_table_insert):
Fixed leak
2006-08-08 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-object-tree.c (_dbus_object_subtree_new):
remove dead code
2006-08-08 John (J5) Palmieri <johnp@redhat.com>
* tools/run-with-tmp-session-bus.sh: use #!/bin/sh instead of
#!/bin/bash
2006-08-08 John (J5) Palmieri <johnp@redhat.com>
* Doxyfile.in: fix the INPUT line so we can generate docs
when sourcedir != builddir (patch from Cygwin Ports maintainer
<yselkowitz at users dot sourceforge dot net>
2006-08-08 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-sysdeps.h:
* dbus/dbus-sysdeps.c:
* dbus/dbus-string.c:
s/_dbus_printf_length/_dbus_printf_string_upper_bound to comform with
GLib's function which does the same thing
* configure.in:
* bus/Makefile.am:
* bus/dir-watch-default.c:
* bus/dir-watch-dnotify.c:
* bus/dir-watch-kqueue.c:
Add kqueue directory watching for freebsd and split the directory
watching code into seperate files per method/arch
(patches from Timothy Redaelli <drizzt at gufi dotorg>)
2006-08-08 John (J5) Palmieri <johnp@redhat.com>
* configure.in:
* tools/Makefile.am:
* tools/dbus-launch.c:
* bus/Makefile.am:
allow --with-dbus-daemondir switch to be used to make the
daemon install to a seperate bindir like /usr/libexec
(patch from Brian Cameron <brian dot cameron at sun dot com)
2006-08-08 John (J5) Palmieri <johnp@redhat.com>
* bus/Makefile.am (install-data-hook): removed the slash after
$(DESTDIR) so we don't get the double slash which does not work
in windows (patch from Andras Porjesz
<andras dot porjesz at siemens dot com>)
2006-08-08 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-sysdeps.h:
* dbus/dbus-sysdeps.c:
add _dbus_printf_length (patch from Peter Kümmel
<syntheticpp at gmx dot net>)
2006-08-08 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-internals.c: unistd.h is not used
(_dbus_verbose_real): only enable verbose printing
if DBUS_VERBOSE environment var is set to '1'
(patch from Peter Kümmel <syntheticpp at gmx dot net>)
2006-08-08 John (J5) Palmieri <johnp@redhat.com>
* configure.in: add a GCC flag check for -Wdeclaration-after-statement
so we still compile on older gcc (patch from Frederic Peters
<fpeters at 0d dot be>
2006-08-04 Havoc Pennington <hp@redhat.com>
* configure.in: add -Wdeclaration-after-statement
* dbus/dbus-connection.c: change all the pending call stuff to
reflect the fact that pending call operations use the connection
lock
* dbus/dbus-pending-call.c: add locking here
* dbus/dbus-errors.c (struct DBusRealError): don't make the name
field const consistent with how message field is done
2006-08-03 John (J5) Palmieri <johnp@redhat.com>
* s/D-BUS/D-Bus/g
2006-08-03 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-object-tree.c: Patch by Benjamin Otte
<in7y118 at public.uni-hamburg dot de> - fix invalid
read/write reported by valgrind
2006-07-24 John (J5) Palmieri <johnp@redhat.com>
* Released 0.91
2006-07-22 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-connection.c:
(_dbus_connection_attach_pending_call_unlocked):
(connection_timeout_and_complete_all_pending_calls_unlocked):
Make sure we set timeout_added on pending calls to FALSE when
we remove the timeout from the connection
2006-07-21 John (J5) Palmieri <johnp@redhat.com>
* Removed some extra bindings stuff lingering around (thanks timo)
* dbus-pendingcall.c (_dbus_pending_call_new):
s/dbus_connection_ref/_dbus_connection_ref_unlocked fixes assertion
when we tried to take a lock on an already locked connection
2006-07-17 John (J5) Palmieri <johnp@redhat.com>
* Released 0.90
2006-07-17 Havoc Pennington <hp@redhat.com>
* dbus/dbus-marshal-basic.c (_dbus_type_to_string): support 64-bit
ints, reported by Owen Taylor
2006-07-17 John (J5) Palmieri <johnp@redhat.com>
* doc/TODO:
* dbus/dbus-bus.c:
* dbus-errors.c:
* dbus/dbus-marshal-validate.c:
Removed TODO items which were fixed or are no longer relevent
2006-07-17 John (J5) Palmieri <johnp@redhat.com>
* dbus-qt4-1.pc.in, dbus-sharp.pc.in:
Remove stray files from the stripped bindings
2006-07-16 Havoc Pennington <hp@redhat.com>
* dbus/dbus-pending-call.c (_dbus_pending_call_set_timeout_error):
Improve the error message on reply timeout
2006-07-14 John (J5) Palmieri <johnp@redhat.com>
* Remove all bindings
2006-07-13 John (J5) Palmieri <johnp@redhat.com>
* dbus-connection.c (dbus_connection_send_with_reply): return TRUE
and set pending_reply out arg to NULL is connection is disconnected
(connection_timeout_and_complete_all_pending_calls_unlocked): New
static method for cleaning up pending calls on disconnect
(_dbus_connection_get_dispatch_status_unlocked): If we have pending
calls queued timeouts on disconnect
* dbus/dbus-pending-call.c (_dbus_pending_call_set_connection):
Remove
2006-07-13 Carlos Garcia Campos <carlosgc@gnome.org>
* bus/activation.[ch] (bus_activation_list_services): new function to
get the list of services that can be activated
* bus/dispatch.c: test coverage for the new bus method
ListActivatableNames
* bus/driver.c: new bus method ListActivatableNames to get the list of
services that can be activated
* doc/dbus-specification.xml: ListActivatableNames method documentation
2006-07-12 John (J5) Palmieri <johnp@redhat.com>
* dbus/Makefile.am: add dbus-pending-call-internal.h to the list of
source files
2006-07-12 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-message-factory.c:
Fix index into an array (patch by Peter Kümmel <syntheticpp at gmx.net>)
2006-07-12 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-connection-internal.h:
* dbus/dbus-connection.c:
* file dbus/dbus-pending-call.c:
* dbus/dbus-pending-call.h:
Make DBusPendingCall an opaque type even to D-Bus internals
2006-07-07 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-connection.h: remove connection_disconnect and replace with
connection_close
* dbus/dbus-connection.c: include dbus-bus.h
(_dbus_connection_read_write_dispatch): make static
2006-07-07 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-connection.c (dbus_connection_close): removed deprecated
function
(dbus_connection_dispatch): On disconnect unref any shared connections
* dbus/dbus-bus.c (_dbus_bus_check_connection_and_unref): new function
for cleaning up shared connections on disconnect
(internal_bus_get): get a hard refrence to shared connections when
they are created
* doc/TODO: Remove items which are no longer relevent or have been fixed
Split 1.0 todo items with a 0.90 freeze todo list
2006-06-14 Ross Burton <ross@openedhand.com>
* glib/dbus-gobject.c:
Free a leaking GArray (surely not!) in dbus_g_method_return.
2006-06-14 Ross Burton <ross@openedhand.com>
* tools/Makefile.am:
* tools/dbus-monitor.c:
Don't use the GLib bindings in dbus-monitor (patch from Ralf
Habacker).
2006-06-14 Ross Burton <ross@openedhand.com>
* tools/dbus-print-message.c:
Also print the object path when outputting signals or method calls.
2006-06-13 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/src/Makefile.am: install the qdbus.h header.
This allows people to actually use the installed code.
2006-06-12 Ross Burton <ross@openedhand.com>
* glib/dbus-gproxy.c:
Don't leak a GArray when firing signals (thank Rob Taylor for review).
2006-06-12 Thiago Macieira <thiago.macieira@trolltech.com>
* Released 0.62
2006-06-12 Thiago Macieira <thiago.macieira@trolltech.com>
* dbus/dbus-arch-deps.h.in: Remove spurious semi-colons that
break pedantic builds. Closes bug 6043 (patch approved by
Havoc back in February).
2006-06-12 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/src/qdbusintegrator.cpp: Fix bug in parsing async methods
that took a QDBusMessage parameter.
* qt/src/qdbusbus.h: Add a default flag for RequestName.
* qt/tools/dbus.cpp: Don't use automatic call because we might
be calling an async method: request a reply.
2006-06-11 Thiago Macieira <thiago.macieira@trolltech.com>
* test/qt/*: Update the testcases, including testing the new
functionality of sending null QByteArray and QString over the
bus. Add new headertest test and restore the old
qdbusxmlparser test.
2006-06-11 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/tools/dbuscpp2xml.cpp: Compile on Windows.
* qt/tools/dbusidl2cpp.cpp: Add missing newline.
* qt/examples/Makefile.am:
* qt/examples/chat.h: Use UI-generated files with the ui_*.h
form.
* qt/src/qdbusmarshall.cpp: Allow sending of QString() and
QByteArray() (nulls) over the bus.
* qt/src/qdbusabstractinterface.cpp: Use the correct variable,
the one that has the signature suffix stripped.
* qt/src/qdbusreply.h: Make some methods const.
2006-06-09 Thiago Macieira <thiago.macieira@trolltech.com>
Patch from Timo Hoenig <thoenig@suse.de>.
* qt/dbus/Makefile.am: New file. Fix "make dist", add all headers
required during build to EXTRA_DIST.
* qt/src/Makefile.am: Fix "make dist", add 'qdbus.h' to EXTRA_DIST.
* qt/Makefile.am: Fix "make dist", add 'dbus' to DIST_SUBDIRS.
* configure.in: Fix "make dist", take care that the Makefile for
qt/dbus is being generated.
2006-06-07 John (J5) Palmieri <johnp@redhat.com>
* bus/bus.c: Fix eavesdropping on method calls
2006-06-07 John (J5) Palmieri <johnp@redhat.com>
* configure.in:
* dbus/dbus-userdb-util.c:
Add Solaris console owner patch from Artem Kachitchkine
2006-06-07 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/Makfile.am:
* qt/src/Makefile.am: Fix the EXTRA_DIST after the
reorganisation. Thanks to Timo Hoenig for pointing this out.
2006-06-06 Robert McQueen <robot101@debian.org>
* glib/dbus-gtype-specialized.c: Fix obvious leak of GArray in every
call to dbus_g_type_get_struct.
2006-06-06 Robert McQueen <robot101@debian.org>
* glib/dbus-gvalue-utils.c: Fix the failing test where static string
pointers were put into a GPtrArray-based specialised collection, and
then freed along with the array. GValues which you add into
collections or maps which have the NOCOPY flag set are assumed to not
belong to the caller, so rather than the existing pointer-stealing
semantics, they are copied instead. Given that the main consumers of
this abstraction are the bindings themselves, I don't think this is
too bad, but others should watch their choice of take vs set_static.
2006-06-06 Robert McQueen <robot101@debian.org>
* glib/dbus-gvalue-utils.c: Spotted a warning about the return value
of g_slist_prepend not being used. Fixed copying of slist-based
specialised collections, then wrote a test case and found that it was
all broken. Went on to fix iterating and appending too. Good thing
nobody uses this code yet.
2006-06-06 Robert McQueen <robot101@debian.org>
* glib/dbus-gvalue-utils.c: Remove duplicated code by having all of
the iterators use gvalue_take_ptrarray_value (the GValues themselves
are discarded without unsetting, so it makes no difference whether
we take or set_static). Remove cases for G_TYPE_POINTER because
there really is nothing useful we can do with them in our
specialised types - we *need* boxed copy/free functions at the very
least.
2006-06-05 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/dbus: Add directory. I had forgotten to add this
yesterday after the move...
* qt/examples/Makefile.am:
* qt/examples/dbus.cpp: Moved to qt/tools/dbus.cpp.
* qt/tools/Makefile.am:
* qt/tools/dbus.cpp: Moved from qt/examples/dbus.cpp.
Added feature to get and set properties.
Added validation of service, object path and interface names.
* qt/tools/dbusidl2cpp.cpp: Two new features:
1) Allow specifying both the header and the source file names,
by separating them with a colon.
2) Don't write an interface output if the -p switch wasn't
given, but the -a was.
* qt/src/*: Fix usage of Iterators and ConstIterators.
Fix shadowing of variables by other variables (-Wshadow).
Fix keyword-cleanliness in headers.
Fix ASCII-cast (QLatin1String, QLatin1Char).
Fix validation of member names.
Add extra checking of introspection data during XML parsing.
Various bug fixes.
2006-06-04 Thiago Macieira <thiago.macieira@trolltech.com>
* dbus/Makefile.am:
* dbus/qdbus.h: Remove unnecessary file. This is mirrored into
qt/dbus/qdbus.h now.
2006-06-04 Thiago Macieira <thiago.macieira@trolltech.com>
* configure.in: Make --disable-qt actually do
something. Patch inspired by Zack Rusin.
2006-06-04 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/: Update to Subversion r548032.
This includes a big reorganisation of the files inside the
subdir.
2006-05-30 Sjoerd Simons <sjoerd@luon.net>
* dbus/dbus-sysdeps.c: Make tcp socket connection error somewhat more
clear:
"Failed to connect to socket <host>:<port> <error>" instead of
"Failed to connect to socket <host>: <error>:<port>"
* dbus/dbus-transport-unix.c: Fix crash when no host option is given
for a tcp transport.
2006-05-29 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/*: Update the QtDBus bindings up to revision 546310 in
Subversion.
This adds the dbuscpp2xml tool, that parses a C++ header and
outputs a D-BUS Introspection XML.
2006-05-21 Havoc Pennington <hp@redhat.com>
* glib/dbus-gproxy.c: Put in a pile of assertions that the proxy name
is not NULL when it shouldn't be. Also a couple of possible fixes
for #4637 though I don't understand why the bug happens, to be
honest... also the object constructor has an assert name != NULL
and the name is only currently NULL for peer-to-peer proxies that
I don't think anyone uses? So it should be asserting.
Anyway, for now at least see if we get an earlier assertion failure.
* glib/dbus-gvalue-utils.c: Put in a couple of assertions for
apparently broken code to be sure the tests fail and someone
will fix them...
2006-05-07 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/qdbusmarshall.cpp: Fix a problem of demarshalling lists
and arrays when they had a single element: has_next returns
false, even before you read the element. So, instead, check
the array length.
2006-05-06 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/qdbusmessage.cpp:
* qt/qdbustypehelper_p.h:
* qt/qdbusintegrator.cpp: gcc 3.4 doesn't like Q_FOREACH when
the list is a const-reference
2006-05-03 John (J5) Palmieri <johnp@redhat.com>
* Adding old doc patch that never got applied
* dbus/bus.c (dbus_bus_add_match): Add documentation
* doc/dbus-specification.xml: Add documentation for the match rules
and the AddMatch and RemoveMatch methods
2006-05-02 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/dbusidl2cpp.cpp: There's no callAsync. Use the correct
call (r535506)
* qt/dbusidl2cpp.cpp:
* qt/qdbusabstractadaptor.cpp:
* qt/qdbusabstractadaptor.h: Make QDBusAdaptorConnector be a
sibling of the QDBusAbstractAdaptor objects instead of the
parent. (r535848)
* qt/dbusidl2cpp.cpp:
* qt/qdbusabstractinterface.cpp:
* qt/qdbusabstractinterface.h:
* qt/qdbusabstractinterface_p.h:
* qt/qdbusinterface.cpp: Make properties in interfaces
actually work. The code that was generated would not compile,
due to moc calls to functions that did not exist. They now
shall. (r536571)
2006-04-30 Thiago Macieira <thiago.macieira@trolltech.com>
* Makefile.am:
* configure.in:
* dbus-qt4-1.pc.in: Add a pkg-config file for libdbus-qt4-1.
Thanks to Brad Hards for providing the patch
2006-04-29 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/dbusidl2cpp.cpp: There's no callAsync. Use the correct
call. (r535506)
2006-04-29 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/examples/dbus.cpp: Enhance error messages and use
QDBusInterfacePtr.
2006-04-29 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/qdbusinterface.h: Rename QDBusRef to QDBusInterfacePtr
and disable the copy operators. (r533772, r534746)
* qt/qdbuserror.h: Remove the automatic cast to bool. (r533929)
* qt/qdbusabstractinterface.cpp:
* qt/qdbusabstractinterface.h: Change the default call mode to
not use the event loop. Add convenience call() methods that
take a CallMode parameter. (r534042)
* qt/qdbusconnection.h: Change the default call mode to not
use the event loop. (r534042)
* qt/qdbusinterface.cpp:
* qt/qdbusinterface.h: Add a method to tell us if the
interface is valid (since we don't return a null pointer
anymore) (r534099)
* qt/qdbusinterface_p.h: Don't crash if metaObject is 0
(r534101)
* qt/qdbusinternalfilters.cpp: Decouple the introspection
function in two so taht we get the chance to introspect
without having a QDBusMessage (r534102)
* qt/qdbusbus.h:
* qt/qdbusconnection.cpp:
* qt/qdbusconnection_p.h:
* qt/qdbusintegrator.cpp: Keep a list of our own names to
avoid a round-trip to the server when attempting to introspect
one of our own objects. Also make sure the filter functions
match the empty interface as well. (r534108)
Don't keep the connection names. Instead, trust the unique
connection name (r534111)
Remove event loop usage (r534112)
2006-04-29 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/qdbusintegrator.cpp: Fix assertion failure spotted by
Brad Hards.
2006-04-28 Robert McQueen <robot101@debian.org>
* glib/dbus-gproxy.c: Fix properties so that they can be given in
any order, making it easier for people who inherit from this
object.
2006-04-28 Robert McQueen <robot101@debian.org>
* glib/dbus-gvalue-utils.c: Patch from Jakub Stachowski to fix leaking
of memory from within pointer arrays and lists. Fixes bug #6300.
2006-04-28 Robert McQueen <robot101@debian.org>
* glib/dbus-gvalue.c: Patch from Jakub Stachowski to fix a leak in
generating struct signatures. Fixes bug #6083.
2006-04-28 Robert McQueen <robot101@debian.org>
* qt/Makefile.am: Tweak CLEANFILES from qdbusconnection.moc
to qdbusconnection_p.moc.
2006-04-24 John (J5) Palmieri <johnp@redhat.com>
* README, INSTALL: Doc fixes
Patch from Brad Hards <bradh at frogmouth.net>
2006-04-23 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/examples/dbus.cpp: Use the new merged-interface mode for
the dynamic meta object. No need to guess which interface to
call.
2006-04-23 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/qdbusconnection_p.h:
* qt/qdbusmetaobject.cpp:
* qt/qdbusmetaobject_p.h:
* qt/qdbusintegrator.cpp: Use the new merged-interface mode
for the dynamic meta object. No need to guess which
interface to call.
* qt/qdbusabstractinterface_p.h:
* qt/qdbusconnection.cpp:
* qt/qdbusintegrator.cpp:
* qt/qdbusinterface.cpp:
* qt/qdbusinterface.h: Make findInterface always return a non-null pointer.
Add a QDBusRef that looks and behaves like DCOPRef.
2006-04-23 Thiago Macieira <thiago.macieira@trolltech.com>
* dbus/dbus-connection.c: Interfaces are optional in method
calls, so don't give up if the interface parameter is NULL.
Patch reviewed by Havoc Pennington.
2006-04-23 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/qdbusreply.h: Add default constructor and operator=
(r532625)
* qt/qdbustypehelper_p.h: Use a clean namespace: no foreach()
in public headers (r532952)
* qt/qdbusabstractinterface.cpp:
* qt/qdbusabstractinterface_p.h: Add the AutoDetect mode and
make it the default (r532951)
2006-04-19 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-connection.c: Fix asserts
Patch from Tim Moloney <t.moloney at verizon.net>
2006-04-19 John (J5) Palmieri <johnp@redhat.com>
* mono/Connection.cs, mono/Message.cs: Check Target type
Patch from Aaron Bockover (abockover at novell.com)
2006-04-13 Thiago Macieira <thiago.macieira@trolltech.com>
* INSTALL: fine-tune the requirements for the Qt4 binding.
2006-04-16 Daniel P. Berrange <dan@berrange.com>
* tools/dbus-print-message.c: Added support for printing of all
remaining data types. Fixed logic for indentation of compound
data types.
2006-04-15 Daniel P. Berrange <dan@berrange.com>
* INSTALL: fill out content of file providing DBus specific
build installations, followed by generic Auto* INSTALL file
content
2006-04-13 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/qdbusintegrator.cpp: Work around g++ 3.3 bug.
Patch by Stefan Eilers. (r529537)
2006-04-13 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/qdbusinternalfilters.cpp: Don't show the parent's
contents (r528208)
2006-04-10 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/Makefile.am: fix the dependency for
qdbusconnection_p.moc. It's included in qdbusintegrator.cpp,
not in qdbusconnection.cpp.
Thanks to Jakub Stachowski <stachowski@hypair.net> for
spotting this.
2006-04-10 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/examples/listnames.cpp:
* qt/examples/Makefile.am: Three ways to list the names on the
bus.
2006-04-10 Thiago Macieira <thiago.macieira@trolltech.com>
* test/qt/tst_hal.cpp: Remove the waiting, since it's not
needed anymore. Requires Qt 4.1.3 to work properly. (r528148)
2006-04-10 Thiago Macieira <thiago.macieira@trolltech.com>
Merge from Subversion:
* qt/qt-dbus.qdocconf: Update Trolltech's webpage link to
something that exists (r526315)
* qt/qdbusinternalfilters.cpp: Correctly detect non-scriptable
slots/signals (r526316)
* qt/qdbusinternalfilters.cpp: Fix the setProperty call and
also return an unknown-method error if the parameters don't
match for org.freedesktop.DBus.Properties. (r526842)
* qt/examples/dbus.cpp: Allow passing of QVariants (r526843)
* qt/qdbusintegrator.cpp: Restore the proper order of
delivery: don't make method returns be delivered on priority
(r528150)
2006-03-28 Thiago Macieira <thiago.macieira@trolltech.com>
* configure.in qt/Makefile.am: add qt/examples
* qt/examples: Add QtDBus example programs:
- hello: Hello, World
- ping: Simple method-calling program
- pong: Simple object-exporting program (not using adaptors)
- complexping: Interactive method-calling program
(also gets and sets properties).
- complexpong: Sample program exporting methods, signals and
properties, using adaptors.
- dbus: Simple implementation of a generic method-calling
program, similar to 'dbus-send', but with semantics
similar to 'dcop'.
- chat: Simplistic chat program, implemented using signals
and the system bus. Looks like IRC.
2006-03-28 Thiago Macieira <thiago.macieira@trolltech.com>
* configure.in: Detect QtGui (necessary for one of the
example programs). Note: this increases the minimum required
version of Qt to 4.1.3.
2006-03-28 Thiago Macieira <thiago.macieira@trolltech.com>
* test/qt/*: Sync with KDE Subversion revision 523647.
Update the testcases to the new API. Remove testcases for
classes that are no longer public or have been removed.
2006-03-28 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/*:
* dbus/qdbus.h: Sync with KDE Subversion revision
523647. Hopefully, this will be the last of the
source-incompatible changes. Documentation has been improved;
support for QList<basic-types> has been added; QDBusObject is
gone; QDBus(Abstract)Interface is now a QObject with
auto-generated meta-object; QDBusIntrospection is marked
private, since QMetaObject can be used now; lots of bugfixes.
2006-03-16 John (J5) Palmieri <johnp@redhat.com>
Patch from Milosz Derezynski <internalerror at gmail.com>
* configure.in:
Output the service directory in the configure summary
* dbus-1.pc.in:
Add session_bus_services_dir
2006-03-10 Ross Burton <ross@openedhand.com>
* tools/dbus-print-message.c:
Add support for object paths and signatures.
2006-03-06 Sjoerd Simons <sjoerd@luon.net>
* bus/bus.c: (bus_context_reload_config): Flush the user database cache on
config reload.
* bus/dbus-daemon.1.in: Also note that SIGHUP flushes the user/group
information caches
* dbus/dbus-hash.c: (_dbus_hash_table_remove_all):
* dbus/dbus-hash.h: Add function to remove all entries from a hash table
* dbus/dbus-userdb.c: (_dbus_user_database_flush):
* dbus/dbus-userdb.h: Add function to flush all user/group information
caches.
2006-03-06 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/dbusidl2cpp.cpp:
* qt/Makefile.am: add the dbusidl2cpp tool, the replacement
for dcopidl2cpp, found in the KDE installations (or the more
modern kalyptus): generate Qt4 C++ code for the input XML
introspection. Currently no IDL parsing.
2006-03-06 Thiago Macieira <thiago.macieira@trolltech.com>
* test/qt/*: Update the self-tests.
2006-03-06 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/*:
* dbus/qdbus.h: Sync with KDE Subversion revision 516237. This
represents the first feature-complete version of the Qt4
bindings since I took ove maintainership.
2006-03-06 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/Doxyfile: Adding a Doxyfile for the Qt4 bindings
dir. This is C++, so we can't use the DBus ones.
2006-03-02 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx: Remove refrence to sys/cdefs.h
(Patch from Artem Kachitchkine <Artem.Kachitchkin at Sun.COM>)
2006-03-02 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-connection.c:
(_dbus_connection_block_pending_call):
Check to see if our data has already been read off the connection
by another blocking pending call before we block in poll.
(check_for_reply_and_update_dispatch_unlocked):
Code taken from _dbus_connection_block_pending_call - checks for
an already read reply and updates the dispatch if there is one.
* test/name-test/test-pending-call-dispatch.c:
New test for making sure we don't get stuck polling a
dbus connection which has no data on the socket when
blocking out of order on two or more pending calls.
2006-02-28 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/Makefile.am: Patch by Sjoerd Simons. More .moc issues:
make/automake don't detect that we're talking about the same
.lo file if I specify the full path to the source files.
2006-02-26 Havoc Pennington <hp@redhat.com>
* bus/dbus-daemon.1.in: improve the language in a couple spots I noticed
* dbus/dbus-bus.c (internal_bus_get): in the error message if the
session bus variable is unset, suggest "man dbus-launch" and "man
dbus-daemon" to figure out how to fix the problem
2006-02-25 Havoc Pennington <hp@redhat.com>
* glib/dbus-glib-tool.c (usage): fix up the usage message, someone
should make this thing use the new glib options parser
2006-02-25 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/Makefile.am: Patch by Sjoerd Simons. Fix the path to the
.lo files taking moc sources.
2006-02-25 Havoc Pennington <hp@redhat.com>
* dbus/dbus.h, dbus/Makefile.am: add dbus-signature.h to dbus.h
and install it as a public header
2006-02-24 John (J5) Palmieri <johnp@redhat.com>
* Released 0.61
2006-02-24 John (J5) Palmieri <johnp@redhat.com>
* proxies.py: Fix the callchain
2006-02-24 John (J5) Palmieri <johnp@redhat.com>
* patch from Sjoerd Simons <sjoerd at debian.org>:
* dbus/dbus-sysdeps-util.c (_dbus_group_info_free): Moved to
dbus/dbus-sysdeps.c
* dbus/dbus-userdb.c (_dbus_group_info_free_allocated): Don't
call _dbus_group_info_free_allocated which causes infinite loop,
correctly call _dbus_group_info_free
2006-02-20 Thiago Macieira <thiago.macieira@trolltech.com>
* qt/qdbusinterface_p.h:
* qt/qdbusinterface.cpp: Use the standard
org.freedesktop.DBus.Method.NoReply annotation for the "async"
calls instead of creating one for us.
* qt/qdbusconnection_p.h:
* qt/qdbusintegrator.cpp: Remove debugging code.
* qt/qdbusintegrator.cpp:
* qt/qdbusmessage.cpp:
* qt/qdbusmessage_p.h:
* qt/qdbusmessage.h: Change the behaviour of automatic
reply-sending: now a reply is always sent, unless the caller
didn't request one or if the user slot has already sent one.
2006-02-16 Robert McQueen <robot101@debian.org>
* configure.in: Patch from Debian packages by Sjoerd Simons
<sjoerd@debian.org> to add --with-qt-moc and --with-qt3-moc
arguments so it's possible to build both bindings in the
same tree.
* qt/Makefile.am: Fix truncated value so that make dist works.
2006-02-16 Robert McQueen <robot101@debian.org>
* acinclude.m4, configure.in: Patch from Brad Hards
<bradh@frogmouth.net> to avoid warnings from autoconf 1.9 by
improving quoting, re-ordering a few checks, and a few other
aesthetic tidy-ups.
2006-02-16 Robert McQueen <robot101@debian.org>
* dbus/dbus-message.c (dbus_message_iter_get_fixed_array):
Patch from Rob Taylor <rob.taylor@collabora.co.uk> to correct a bogus
assertion that the next element to read from the iter is fixed in
size. This is not the case when you are at the end of the iter,
because the next element type is INVALID.
* dbus/dbus-string.c (_dbus_string_init_const_len): Correct a
a bogus assert which means that you may not initialise a 0-length
string unless you provide a non-NULL pointer. This prevented
you from marshalling messages containing zero-length arrays in
some cases.
* glib/dbus-gvalue.c (demarshal_collection_array): Another patch
from Rob to correct bogus asserts when trying to demarshal an
array and get_fixed_array got you 0 elements. Append nothing to
the GArray in this case.
* test/glib/test-dbus-glib.c: Add a test case for round-tripping
an empty array via the glib bindings. Without all of the above
patches, this new test fails.
2006-02-16 Robert McQueen <robot101@debian.org>
* glib/dbus-gmain.c: Make the previous commit compile.
* python/_dbus.py, python/matchrules.py: Patch from Ole Andre
Ravnaas <ole.andre.ravnaas@collabora.co.uk> to allow you to
specify sender_keyword="foo", path_keyword="bar" when adding
a signal listener, so that you can bind to signals generically
but still do something useful in your callback.
* python/dbus_bindings.pyx: Demarshal the byte type as unsigned
chars so that they're not cast to chars and made negative. Thanks
to Jakub Stachowski for reporting this and testing the fix.
2006-02-15 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-glib.h:
* glib/dbus-gmain.h:
(dbus_g_connection_open): new method for openning
a connection to an arbitrary address in the glib bindings
* ChangeLog: checkin last entry which doesn't seem to be commited
2006-02-13 John (J5) Palmieri <johnp@redhat.com>
* tools/dbus-launch.c: Fixed sh syntax output
2006-02-13 Robert McQueen <robot101@debian.org>
* glib/dbus-binding-tool-glib.c, glib/dbus-gmain.c,
glib/dbus-gsignature.c, glib/dbus-gtype-specialized.c,
glib/dbus-gtype-specialized.h, glib/dbus-gvalue-utils.c,
glib/dbus-gvalue-utils.h, glib/dbus-gvalue.c:
Patch from Rob Taylor <rob.taylor@collabora.co.uk> to add a big
missing piece of the glib bindings jigsaw puzzle. This modifies
the existing specialised types to have N type parameters (rather
than the current 1 or 2 for arrays and dictionaries respectively).
You can then use this to get a glib type to represent any arbitrary
D-Bus struct type using dbus_g_type_get_struct. The only
implementation of these types is with GValueArrays as before,
but it's now possible to store these in arrays, emit them in
signals, etc.
2006-02-10 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-signature.c (dbus_signature_iter_recurse): Correctly
deal with nested arrays (Bug #5823) Patch by Thiago Macieira
<thiago.macieira at trolltech.com>
2006-02-10 John (J5) Palmieri <johnp@redhat.com>
* mono/doc/Makefile.am: Fix parallel make problem with mono-doc
(Bug #4213) Patch from Doug Goldstein <cardoe at gentoo.org>
2006-02-10 John (J5) Palmieri <johnp@redhat.com>
* bus/connection.c (bus_connections_expect_reply): Make
pending reply limit not common to all connections (Bug #5416)
Patch from Kimmo Hämäläinen <kimmo.hamalainen at nokia.com>
2006-02-10 John (J5) Palmieri <johnp@redhat.com>
* tools/dbus-launch.c: Fixed csh syntax output (Bug #5720)
2006-02-10 John (J5) Palmieri <johnp@redhat.com>
* gcj/Makefile.am: point to correct jar command (Bug #4529)
patch from Doug Goldstein <cardoe at gentoo.org>
2006-02-09 Joe Shaw <joeshaw@novell.com>
* mono/Arguments.cs: Fix a magic number in the mono bindings
that doesn't work on 64 bit arches. Patch from Peter Johanson.
2006-01-27 Robert McQueen <robot101@debian.org>
* glib/dbus-binding-tool-glib.[ch]: Patch based on Ricardo Kekki's
patch to use an annotation org.freedesktop.DBus.GLib.ClientCSymbol
when generating the client-side methods, instead of overloading
CSymbol which broke everything horribly. My apologies.
2006-01-27 Robert McQueen <robot101@debian.org>
* glib/dbus-gtype-specialized.[ch], glib/dbus-gvalue-utils.c: Patch
by me and Rob Taylor to add a simple_free function to D-Bus map
and collection types, which allows those types which can be freed
with a GDestroyNotify (such as GHashTables and GArrays, but not
GPtrArrays) to be stored as the values in hashtables.
* test/glib/test-dbus-glib.c, test/glib/test-service-glib.{c,xml}:
Patch by Rob Taylor to add nested dicts to the glib tests to check
the above code works, and appears not to leak when called repeatedly.
2006-01-27 Robert McQueen <robot101@debian.org>
* glib/dbus-gvalue.c (demarshal_valuearray): Patch from Rob Taylor
to free a D-Bus allocated string with dbus_free () instead of
g_free ().
2006-01-27 Iain Holmes <iain@openedhand.com>
* glib/dbus-gproxy.c (dbus_g_proxy_dispose): Protect the dispose
method from being called multiple times.
2006-01-19 Robert McQueen <robot101@debian.org>
* glib/dbus-binding-tool-glib.c: Patch from Rob Taylor
<rob.taylor@collabora.co.uk> to add support for generating bindings
to arrays that are represented as GPtrArrays rather than GArrays (ie
size-variable things, such as strings, objects, structs, etc).
2006-01-05 Robert McQueen <robot101@debian.org>
* dbus/dbus-glib.h, glib/dbus-gproxy.c: Patch from Ricardo Kekki
<ricardo.kekki@movial.fi> to make it possible to inherit from
DBusGProxy, by splitting the DBusGProxy struct into a public part and
a private part, and moving the setting of the DBusGProxyManager into a
connection property, allowing proper GObject construction.
2006-01-05 Robert McQueen <robot101@debian.org>
* glib/dbus-binding-tool-glib.c: Patch from Ricardo Kekki
<ricardo.kekki@movial.fi> to make dbus-binding-tool heed C symbol name
annotations when generating glib client bindings.
2005-12-19 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-shared.h: Call it shared constants instead of shared macros
* dbus/dbus-protocol.h: add DOxygen markup to quiet warnings
2005-12-19 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-shared.h: add DOxygen markup to quiet warnings
2005-12-19 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-macros.h: correct DOxygen end of section (s/}@/@})
2005-12-19 Ross Burton <ross@openedhand.com>
* doc/dbus-tutorial.xml:
Document the Glib client-side bindings, and list all possible annotations.
2005-12-19 John (J5) Palmieri <johnp@redhat.com>
* dbus/bus.c (dbus_bus_release_name): Add documentation
2005-12-06 Robert McQueen <robot101@debian.org>
* python/service.py: s/sucessful/successful/ so we're allocating to
and reading from the same variable. Oops.
2005-11-30 John (J5) Palmieri <johnp@redhat.com>
* Released 0.60
2005-11-30 John (J5) Palmieri <johnp@redhat.com>
* test/qt/Makefile.am: build from srcdir
* qt/qtconnection.cpp (requestName): Changed PROHIBIT_REPLACE to ALLOW_REPLACE
Note - this code is wrong and needs to be fixed by the Qt binding
developers. The flags should be treated as bitfields and not enums.
* qt/qtconnection.h: Change ProhibitReplace to AllowReplace
2005-11-30 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-list.c (_dbus_list_insert_after_link, _dbus_list_insert_after,
link_after): remove #ifdef DBUS_BUILD_TESTS since we use these methods
in production code
2005-11-30 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-connection.c (dbus_connection_read_write): Add new
method for getting messages off the bus in the absence of a
mainloop. This method is much like
dbus_connection_read_write_dispatch except it does not dispatch
the messages to a registered filter function. Instead it
allows a developer to process messages by directly popping
them off the bus.
2005-11-30 John (J5) Palmieri <johnp@redhat.com>
* bus/desktop-file.c (parse_key_value): Ignore locales allowing
the parser to continue instead of returning error
(bus_desktop_file_load): Do not free parser data when
parse_section_start or parse_key_value fails because it was
already freed by parser_free (patch from Carlos Garcia Campos
<carlosgc at gnome.org>)
2005-11-30 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-auth.c, dbus/dbus-connection.c, dbus/dbus-keyring.c,
dbus/dbus-server-debug-pipe.c, glib/dbus-binding-tool-glib.c
glib/dbus-glib-tool.c, glib/dbus-gparser.c, glib/dbus-gproxy.c
test/test-segfault.c, test/test-utils.c,
test/glib/test-dbus-glib.c, tools/dbus-cleanup-sockets.c
tools/dbus-launch.c, tools/dbus-tree-view.c, tools/dbus-viewer.c:
Various cleanup of dead code and compiler warnings (patch from
Kjartan Maraas <kmaraas at gnome.org>)
2005-11-30 John (J5) Palmieri <johnp@redhat.com>
* glib/dbus-gmain.c (connection_setup_add_watch): plugged a leak
(patch from Carlos Garnacho Parro <carlosg at gnome.org>
2005-11-27 Robert McQueen <robot101@debian.org>
* python/dbus_bindings.pyx: Repair my previous commit which reverted
part of the preceding one. Oops. Merge patch by Johan Hedberg
<johan.hedberg@nokia.com> to fix marshalling of 16-bit integer values
on big-endian platforms.
* test/python/test-client.py: Add some 16-bit integers to the test
values.
2005-11-27 Carlos Garcia Campos <carlosgc@gnome.org>
* glib/dbus-gobject.c: Append a GValue instead of a basic type in
method return message for property getters
2005-11-27 Robert McQueen <robot101@debian.org>
* python/dbus_bindings.pyx: Fix a bug where doing a strict append
with type v of an instance of dbus.Variant(foo, type='x') caused
it to be boxed twice before sending over the bus.
* python/dbus_bindings.pyx, python/service.py,
test/python/test-client.py: Update the constants for the new
request_name flags, and update comments/test cases now that queueing
is the default action.
2005-11-22 John (J5) Palmieri <johnp@redhat.com>
* configure.in:
- Change version to 0.60 for impending release
- upped the sonames because of ABI and API breakage
2005-11-22 John (J5) Palmieri <johnp@redhat.com>
* configure.in: Add test/name-test/Makefile to the generated
Makefile list
* dbus/dbus-shared.h (#define DBUS_NAME_FLAG_ALLOW_REPLACEMENT):
New flag which replaces DBUS_NAME_FLAG_PROHIBIT_REPLACEMENT
(#define DBUS_NAME_FLAG_DO_NOT_QUEUE): New flag for specifying
not to queue an ower if it can't be the primary owner
* bus/bus.h: Add new internal BusOwner struct
* bus/driver.c (bus_driver_handle_hello): Send flags (0 for default)
to bus_registry_ensure and don't set the prohibit_replacement flag
since they are now set per BusOwner and not per name.
(bus_driver_handle_list_queued_owners): bus method (ListQueuedOwners)
that returns the list of connections in a name's connection queue
* bus/services.c (struct BusService): remove prohibit_replacement field
(struct BusOwner): new struct for keeping track of queued connections
and their associated flags for the queue
(struct BusRegistry): add a BusOwner memory pool
(bus_registry_new): initialize the BusOwner memory pool
(bus_registry_unref): free the BusOwner memory pool
(_bus_service_find_owner_link): new internal method for
searching the queue for a specific connection
(bus_owner_set_flags): new method for adding setting the flags on a
bus owner
(bus_owner_new): new method that creates a BusOwner object from the
pool and sets its flags
(bus_owner_ref, bus_owner_unref): ref counting for BusOwner objects
(bus_registry_ensure): Add the flags parameter
(bus_registry_acquire_service): Switch from using raw connections to
using the BusOwner struct
Add new state machine for dealing with the new set of flags
(bus_registry_set_service_context_table, struct OwnershipCancelData,
cancel_ownership, free_ownership_cancel_data,
add_cancel_ownership_to_transaction, struct OwnershipRestoreData,
restore_ownership, free_ownership_restore_data,
add_restore_ownership_to_transaction): Switch to using BusOwner
instead of raw connections
(bus_service_add_owner): Add flags parameter
Switch to using BusOwner instead of raw connections
Add state machine for dealing with the new set of flags
(bus_service_swap_owner): Swaps the first and second owners in the
queue. Used to make sure proper signals are sent when a service looses
or gains primary ownership. We never insert an owner at the top of the
queue. Instead we insert it in the second position and then swap.
(bus_service_remove_owner): Remove the owner from the queue sending
out the NameLost and NameOwnerChanged signals if the we were the
primary owner
(bus_service_get_primary_owners_connection): New method that extracts
the connection from the primary owner
(bus_service_get_primary_owner): Returns the BusOwner instead of the
connection
(bus_service_get_allow_replacement): Changed from the old
bus_service_get_prohibit_replacement method. Checks the flags of the
primary owner and returns if it can be replaced or not
(bus_service_set_prohibit_replacement): removed
(bus_service_has_owner): returns TRUE if and owner with
the specified connection exists in the queue
* dbus/dbus-bus.c (dbus_bus_connection_get_unique_name): New helper
method that only compiles if tests are enabled. Allows us to get the
unique name of a connection so we can check it against the queue when
doing regression tests
* bus/activation.c (bus_activation_send_pending_auto_activate),
bus/dispatch.c (bus_dispatch),
bus/driver.c (bus_driver_handle_get_service_owner,
bus_driver_handle_get_connection_unix_user,
bus_driver_handle_get_connection_unix_process_id,
bus_driver_handle_get_connection_selinux_security_context),
bus/signals.c (connection_is_primary_owner):
use bus_service_get_primary_owners_connection instead of
bus_service_get_primary_owner
* dbus/dbus-sysdeps.c (_dbus_connect_unix_socket,
_dbus_listen_unix_socket): Calculate the length of the socket
path and use that instead of using a fixed length which was
causing socket names to contain many trailing Nul bytes.
* dbus/dbus-glib-lowlevel.h, glib/dbus-gobject.c
(dbus_g_method_get_sender): New method for extracting the sender
from a DBusGMethodInvocation
(dbus_g_method_return_get_reply): changed name to
dbus_g_method_get_reply
(dbus_g_method_return_send_reply): changed name to
dbus_g_method_send reply
* doc/dbus-specification.xml: New docs that describe how the new
queueing system works and talks about the changes to the how
we specify socket names
* glib/examples/example-service.c,
glib/examples/example-signal-emitter.c,
glib/examples/statemachine/statemachine-server.c:
Changed the RequestName flags to the new system
* test/name-test/ (test-names.c, run-test.sh, Makefile.am): New
regression test suite for testing various states of the new
queueing system
2005-11-15 Robert McQueen <robot101@debian.org>
* dbus/dbus-glib-lowlevel.h, glib/dbus-gobject.c: Patch from Rob
Taylor to add two methods, dbus_g_method_return_get_reply and
dbus_g_method_return_send_reply, to allow you to get the reply
message from a DBusGMethodInvocation, append arbitrary stuff to it,
and send it. The GLib bindings can't marshal a return value of
something like a(s) if the array is empty - ultimately they should be
made to heed the signature of the out arguments as the Python bindings
now can, but this is a workable interim solution which might have
other applications.
2005-11-15 Robert McQueen <robot101@debian.org>
* bus/driver.c, bus/services.c, bus/services.h: Add a ReleaseName
method to org.freedesktop.DBus to release a bus name or give up
waiting in the queue for it.
* dbus/dbus-bus.c, dbus/dbus-bus.h, dbus/dbus-shared.h: Add a
dbus_bus_release_name method to send the ReleaseName method calls.
Add constants for the return values to dbus/dbus-shared.h.
* doc/dbus-specification.xml: Document the new ReleaseName method
in the specification.
* python/dbus_bindings.pyx: Add a low-level python binding for the
release name method.
* python/exceptions.py, python/service.py: Make freeing BusName
objects release the name. Add a NameExistsException, and fix a
bug with creating UnknownMethodException.
* test/python/test-client.py: Add tests for freeing BusName
objects causing names to be released.
2005-11-14 Robert McQueen <robot101@debian.org>
* python/service.py: Include the traceback in the error reply when we
send an exception over the bus. _BEST_ _PATCH_ _EVER_
2005-11-14 David Zeuthen <davidz@redhat.com>
Patch from Timo Hoenig <thoenig@suse.de>.
* bus/bus.c: I've recently investigated why the automatic reload
of configuration files does not work as expected.
Currently, reloading configuration files does only work when
running dbus-daemon with --nodaemon. If we are running as daemon
we're hitting a dnotify bug once we fork the process.
We're initializing the dnotify fds before calling fork(). Once
the child process forked it does still have the fds (and they
still show up in /proc/`pidof dbus-daemon`/fd/) but we're not
getting SIGIO as changes are made to the configuration files.
The attached patch moves the initialization of the dnotify fds to
process_config_postinit(). This is safe for all current code
paths and solves the dnotify disfunction. If we're running
dbus-daemon as daemon the fds for dnotify are now being
initialized after fork() for the child process.
* configure.in: The current configure.in check for dnotify probes
'x$target_os' for being 'xlinux-gnu'. I've changed the check to
match for 'xlinux', too. Additionally I have adapted the configure
option's style to match with the others.
2005-11-14 Robert McQueen <robot101@debian.org>
* python/decorators.py, python/service.py: Add a new argument to the
dbus.service.method decorator called sender_keyword, which if set,
specifies the name of an argument which will be provided the bus
name of the method caller.
* test/python/test-client.py, test/python/test-service.py: Add a
method and test to check the sender_keyword functionality.
2005-11-07 John (J5) Palmieri <johnp@redhat.com>
* bus/driver.c (bus_driver_handle_reload_config): Make sure we send an
empty reply so blocking calls don't block forever (Patch from Sjoerd
Simons <sjoerd at luon.net>)
* AUTHORS: Add Robert McQueen for his work on the Python
Bindings and other parts of D-Bus
2005-11-07 Robert McQueen <robot101@debian.org>
* python/decorators.py: Change emit_signal function to use the
signature annotation of the signal when marhsalling the arguments from
the service. Fix a bug where the code checking signature length
against argument length referenced the wrong variable.
* python/introspect_parser.py: Avoid adding the type signature of
signal arguments to any methods which occur after them in the
introspection data (!) by making the parser a little more careful
about its current state.
* python/service.py: Remove debug prints from last commit (again :D).
* test/python/test-client.py, test/python/test-service.py: Add test
signals with signature decorators to test the strict marshalling code
gives errors at the right time. Could do with checking the signals
actually get emitted too, given that the test does nothing with
signals at the moment...
2005-11-07 Robert McQueen <robot101@debian.org>
* python/_dbus.py: Add WeakReferenceDictionary cache of dbus.Bus
instances to stop madness of creating new instances representing
the same bus connection all the time, rendering any tracking of
match rules and bus names quite meaningless. Caught a bug where
the private argument to SessionBus() and friends was being passed
in as use_default_mainloop by mistake. Still some problems with
multiple dbus_binding.Connection instances representing the same
low-level connection (eg when you use both SessionBus() and
StarterBus() in same process), but it's a lot better now than it
was.
* python/dbus_bindings.pyx: Add constants with the return values
for bus_request_name().
* python/service.py: Store bus name instances in a per-dbus.Bus cache
and retrieve the same instances for the same name, so deletion can be
done with refcounting. Also now throws some kind of error if you
don't actually get the name you requested, unlike previously...
* test/python/test-client.py: Add tests for instance caching of buses
and bus name objects.
2005-11-04 Robert McQueen <robot101@debian.org>
* python/dbus_bindings.pyx, test/python/test-client.py: Fix
marshalling of boolean values. Add some booleans to the values in
the test client.
* python/decorators.py, python/service.py: Add an 'async_callbacks'
argument to the dbus.service.method decorator, which allows you to
name arguments to take two callback functions for replying with
return values or an exception.
* test/python/test-client.py, test/python/test-service.py: Add test
case using asynchronous method reply functions, both return values and
errors, and from within both the function itself and from a mainloop
callback.
* python/decorators.py, python/service.py: Perform checking that the
number of method/signal arguments matches the number of types in the
signature at class loading time, not when you first introspect the
class.
* python/service.py: Remove debug print left by the last commit.
2005-11-03 Robert McQueen <robot101@debian.org>
* python/service.py: Heavy refactoring of method invocation, with
hopefully no effect on functionality. Nuked _dispatch_dbus_method_call
in favour of a new _message_cb that uses seperate functions for
looking up the method to call, marshalling the return values, and
sending exceptions as errors, and is easier to follow as a
consequence. Fixes some corner cases about returning things that
don't match your declared out_signature, allows exceptions to define
_dbus_error_name and have it be sent over the bus as the error name,
and paves the way for cool stuff like heeding the message no reply
flag, asynchronous method implementations, informing the method of the
sender, and including backtraces in the error messages.
* test/python/test-client.py: Catch and print exceptions thrown in the
async callback tests, rather than passing them to the low-level
bindings to be ignored in a noisy and frustrating manner.
2005-11-03 Robert McQueen <robot101@debian.org>
* python/_dbus.py, python/proxies.py, python/service.py: Add __repr__
functions to dbus.Bus, dbus.service.BusName and dbus.service.Object,
tweak others to be consistent.
* test/python/test-client.py: Tweak output of testInheritance.
2005-10-29 Robert McQueen <robot101@debian.org>
* python/service.py: Major changes to allow multiple inheritance
from classes that define D-Bus interfaces:
1. Create a new Interface class which is the parent class of
Object, and make the ObjectType metaclass into InterfaceType.
2. Patch written with Rob Taylor to replace use of method_vtable
with code that walks the class's __MRO__ (method resolution order)
to behave like Python does when invoking methods and allow
overriding as you'd expect. Code is quite tricky because
we have to find two methods, the one to invoke which has the
right name and isn't decorated with the /wrong/ interface,
and the one to pick up the signatures from which is decorated
with the right interface.
The same caveats apply as to normal multiple inheritance -
this has undefined behaviour if you try and inherit from two
classes that define a method with the same name but are
decorated with different interfaces. You should decorate
your overriding method with the interface you want.
3. Replace grungy introspection XML generation code in the metaclass
with dictionaries that cope correctly with multiple inheritance
and the overriding of methods. This also uses the signature
decorations to provide correct introspection data, including
the debut appearance of the types of your return values. :D
* test/python/test-client.py, test/python/test-service.py: Add a test
case to try invoking an method that overrides one inherited from a
D-Bus interface class.
2005-10-29 Robert McQueen <robot101@debian.org>
* python/dbus_bindings.pyx: Tweak 'raise AssertionError' to assert().
Add checking for the end of struct character when marshalling a
struct in MessageIter.append_strict.
* python/examples/example-service.py,
python/examples/gconf-proxy-service.py,
python/examples/gconf-proxy-service2.py: Update to use gobject
mainloop directly rather than appearing to depend on gtk.
* python/test/test-client.py, python/test/test-server.py: Remove
obsolete and broken test scripts for old bindings. We have up to date
and working tests in test/python/.
2005-10-29 Robert McQueen <robot101@debian.org>
* python/decorators.py: Add optional arguments to the method and
signal decorators to allow you to specify the signature of arguments
and return values. Preserve the doc strings of signal functions in the
decorated version, for pydoc and friends.
* python/dbus_bindings.pyx, python/proxies.py: Replace the
parse_signature_block function with an iterable dbus.Signature()
type. Fix a bug in MessageIter.append_strict where you could append
anything by claiming it was a string.
* python/service.py: Use the out_signature decoration on methods to
marshal return values, meaning you no longer require dbus.Array()
or dbus.Dictionary() to indicate the type when returning empty
arrays or dictionaries. Fix a bug where exceptions which are defined
in __main__ are not turned into error replies.
* test/python/test-client.py, test/python/test-service.py: Add test
for correct marshalling of return values according to out_signature.
Fix a bug in the async call test where the error_handler is missing a
self argument.
2005-10-29 Robert McQueen <robot101@debian.org>
* glib/Makefile.am, glib/examples/Makefile.am,
glib/examples/statemachine/Makefile.am: Merge patch from Ubuntu by
Daniel Stone to replace explicit calls to libtool with $(LIBTOOL).
* test/python/.cvsignore: Add run-with-tmp-session-bus.conf.
* tools/dbus-monitor.1, tools/dbus-monitor.c: Merge dbus-monitor patch
from Ubuntu by Daniel Silverstone to allow specifying match rules on
the command line.
2005-10-27 Ross Burton <ross@openedhand.com>
* dbus/dbus-marshal-header.c:
Remove dead code.
* glib/dbus-gobject.c:
Stop compiler warning.
2005-10-25 Ross Burton <ross@openedhand.com>
* dbus/dbus-auth.c:
* dbus/dbus-server-unix.c:
* dbus/dbus-transport-unix.c:
* glib/dbus-gmain.c:
* glib/dbus-gobject.c:
Add some const keywords.
2005-10-25 Ross Burton <ross@openedhand.com>
* doc/dbus-specification.xml:
Document the NoReply annotation.
* glib/dbus-binding-tool-glib.h:
* glib/dbus-binding-tool-glib.c:
Respect the NoReply annotation.
2005-10-24 Robert McQueen <robot101@debian.org>
* python/dbus_bindings.pyx (String, MessageIter): make D-Bus strings
derive from unicode instead of str, and encode/decode UTF-8 when
marshalling/unmarshalling bus messages
* python/introspect_parser.py: encode introspection data as UTF-8
before passing the buffer into libxml2
* test/python/test-client.py: add unicode test strings
* test/data/valid-service-files/.cvsignore, test/python/.cvsignore:
ignore generated python test files
2005-10-17 John (J5) Palmieri <johnp@redhat.com>
* glib/dbus-gvalue-utils.c (hash_free_from_gtype): handle gdouble
and G_TYPE_VALUE_ARRAY (DBUS_TYPE_STRUCT)
(gvalue_from_hash_value, hash_value_from_gvalue): handle gdouble
* glib/dbus-gvalue.c (dbus_gvalue_to_signature): add missing
DBUS_STRUCT_BEGIN_CHAR and DBUS_STRUCT_END_CHAR charaters
when constructing struct signatures
* python/_dbus.py (Bus): handle private connections using the
private keyword in the constructor. defaults to private=False
(Bus::close): new method to close a connection to the bus
* python/dbus_bindings.pyx (Connection::close): renamed method
was previously called disconnect
(bus_get): now supports getting a private connection
* python/proxies.py (ProxyMethod::__call__): check if ignore_reply
keyword is set to True. if it is, execute the method without waiting
for a reply
(ProxyObject::_introspect_execute_queue): new method for executing
all the pending methods that were waiting for the introspect to
finish. this is called when introspect either succeeds or fails
(ProxyObject::_introspect_error_handler): call queued methods
2005-10-14 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx (MessageIter::append_strict): check for
STRUCT_BEGIN not TYPE_STRUCT in indicate we are marshalling a struct
* python/service.py (Object::_message_cb): handle exceptions correctly
by sending them over the wire to the calling app. This makes sure
the client returns immediately instead of waiting the 15 seconds to
timeout.
* test/python/test-client.py (TestDBusBindings::testBenchmarkIntrospect):
Add a test to benchmark how long it takes to introspect a service and
call a method which returns a large element (pretty fast)
* test/python/test-service.py (TestObject::GetComplexArray): new test
method which pushes a lot of data
2005-10-13 John (J5) Palmieri <johnp@redhat.com>
* python/service.py(ObjectType::_reflect_on_signal, _reflect_on_method):
reclaim memory outside of the loop and use del istead of just setting
the key to None
2005-10-13 John (J5) Palmieri <johnp@redhat.com>
* python/service.py (ObjectType::_reflect_on_signal): Always close
signal tag even when there are no arguments
2005-10-13 John (J5) Palmieri <johnp@redhat.com>
* configure.in: Set mono, mono-docs and Qt3 to default
to no instead of auto when building. These bindings do not
have full time maintainers and will not be supported for the
1.0 release.
2005-10-12 John (J5) Palmieri <johnp@redhat.com>
patches from Michael Krivoruchko <misha at sun.com>:
* dbus/dbus-connection.c (_dbus_connection_queue_received_message_link,
_dbus_connection_message_sent,
_dbus_connection_send_preallocated_unlocked_no_update,
_dbus_connection_pop_message_link_unlocked): handle the case when path
is NULL when calling _dbus_verbose
* configure.in: check for functions getpeerucred and getpeereid
* dbus/dbus-sysdeps.c (_dbus_read_credentials_unix_socket): provides
support of auth EXTERNAL on Solaris 10+ (getpeerucred), FreeBSD 4.6+,
OpenBSD 3.0+ and FreeBSD 5.0+ as well as MacOSX 10.2+ (getpeereid).
Patch was only tested on Solaris 10 x86 so it might be issues
with other platforms (i.e. BSDs and MacOSX)
2005-10-05 John (J5) Palmieri <johnp@redhat.com>
* glib/dbus-gvalue.c (marshal_variant): call _dbus_gvalue_marshal
instead of marshal basic so we can handle recursive types in a variant
* test/glib/test-dbus-glib.c: Add test for marshaling recurive types
in variants
* test/glib/test-service-glib.c, test-service-glib.xml
(my_object_echo_variant [EchoVariant],
my_object_process_variant_of_array_of_ints123
[ProcessVariantOfArrayOfInts123]):
Add two test methods
* python/introspect_parser.py: New module for parsing introspect
data.
* python/dbus_bindings.pyx:
(various places): when throwing errors fix to use errormsg instead
of message local variable because Pyrex can get confused with other
message variables (initial patch by Robert McQueen
<robert.mcqueen at collabora.co.uk>)
(MessageIter::parse_signature_block): new method for getting the next
block in a signiture.
(MessageIter::append_strict): new method for appending values strictly
using the passed in signature instead of guessing at the type
(MessageItter:: append_dict, append_struct, append_array): use
signatures to marshal children if the signature is available
* python/exceptions.py (IntrospectionParserException): new exception
* python/proxies.py (ProxyMethod::__call__): Marshal args with
introspected signatures if available, else we fall back to the
old way of doing things.
(ProxyObject::_introspect_reply_handler ): parse introspection data
* python/service.py (ObjectType::_reflect_on_method): Properly
terminate <method> if there are no args in the reflection data
* test/python/test-client.py: add tests for talking with the GLib
test server. This gives us better coverage for introspection since
python to python will always generate arguments as variants. It also
allows us to test the robustness of the GLib bindings and interlanguage
communications.
2005-10-03 John (J5) Palmieri <johnp@redhat.com>
* bus/driver.c (bus_driver_handle_introspect): Add signals
to the introspect data. (patch from Daniel P. Berrange
<dan at berrange.com>)
* bus/dispatch.c (check_existent_ping): Add testcase for Ping
* dbus/dbus-connection.c (_dbus_connection_peer_filter,
_dbus_connection_run_builtin_filters): Changed these to
be unlock_no_update functions and call
_dbus_connection_send_unlocked_no_update instead of
dbus_connection_send to avoid locking errors.
* doc/TODO: Removed the make Ping test TODO
2005-09-26 John (J5) Palmieri <johnp@redhat.com>
* dbus/Python.pyx: Fixed memory leaks when throwing errors.
We now copy the message from a DBusError and then free
the error object befor throwing the error
* glib/dbus-glib-tool.c: removed extra comma at the end of the
DBusBindingOutputMode enum which was causing a warning.
#include <time.h> so using time_t is explicitly defined
2005-09-26 John (J5) Palmieri <johnp@redhat.com>
* Integrate patches from Lennart Poettering <mzsqb at 0pointer.de>:
- dbus/dbus-bus.c
(internal_bus_get): new method that take over the heavy lifting
of dbus_bus_get and adds the ability to get a private connection
to the bus
(dbus_bus_get): wrapper to internal_bus_get that provides the same
interface as in previous versions
(dbus_bus_get_private): new method that is a wrapper to
internal_bus_get to get a private connection to the bus
- dbus/dbus-bus.h
(dbus_bus_get_private): add as a public libdbus interface
- dbus-1.pc.in: output system_bus_default_address and
sysconfdir variables so apps can use them when compiling
2005-09-23 Harald Fernengel <harry@kdevelop.org>
* dbus/qt: New Qt bindings
2005-09-12 Waldo Bastian <bastian@kde.org>
* dbus/dbus-marshal-validate.c,
doc/dbus-specification.xml, test/Makefile.am,
test/test-names.c: allow hyphens in bus names.
2005-09-11 Mark McLoughlin <mark@skynet.ie>
* test/data/auth/fallback.auth-script: we don't
retry the EXTERNAL method when we know its going
to fail anymore.
2005-09-11 Mark McLoughlin <mark@skynet.ie>
* dbus/dbus-connection-internal.h: rename
(add|remove|toggle)_(watch|timeout) to unlocked()
* dbus/dbus-connection.c: ditto.
* dbus/dbus-timeout.c, dbus/dbus-transport-unix.c:
Update some callers for the renaming.
2005-09-10 Mark McLoughlin <mark@skynet.ie>
* dbus/dbus-auth.c: (record_mechanisms): don't
retry the first auth mechanism because we know
we're just going to get rejected again.
* dbus/dbus-keyring.c: (_dbus_keyring_reload):
Fix thinko ... and what a nasty little bugger to
track down you were ...
* dbus/dbus-connection.c:
(_dbus_connection_add_watch),
(_dbus_connection_remove_watch): add note about
these needing the connection to be locked.
(_dbus_connection_get_dispatch_status_unlocked):
set status to DATA_REMAINS when we queue the
disconnected message.
* bus/dispatch.c:
(bus_dispatch): fix warning.
(check_existent_service_no_auto_start):
Expect ChildSignaled error too.
(check_existent_hello_from_self): fix another
couple of warnings.
2005-09-08 Joe Shaw <joeshaw@novell.com>
Patches from James Willcox <snorp@snorp.net>
* mono/Makefile.am: Add Int16.cs and UInt16.cs
* mono/DBusType/Array.cs: Handle multidimensional arrays, and
support array "out" parameters.
* mono/DBusType/Int16.cs, mono/DBusType/UInt16.cs: New files,
for 16-bit int support.
2005-09-06 John (J5) Palmieri <johnp@redhat.com>
* Released 0.50
* Patch from Steve Grubb:
- bus/activation.c (bus_activation_service_reload_test): clean up
some indentation
- dbus/dbus-keyring.c (_dbus_keyring_reload): fix conditional
- dbus/dbus-message-factory.c (generate_special): fix a couple of
buffer overflows in the test suite. This is non critical because
it can not be exploited and this code is only run when doing a
make check.
* Patch from Yaakov Selkowitz: Build fixes for Cygwin
- configure.in: Don't check and link against kdecore, only qt headers
- dbus/Makefile.am: Add -no-undefined to libdbus_1_la_LDFLAGS
- gcj/org/freedesktop/dbus/Makefile.am:
add libdbus_gcj_1_la_LDFLAGS = -no-undefined
- glib/Makefile.am: Add -no-undefined to libdbus_glib_1_la_LDFLAGS
and $(DBUS_GLIB_LIBS) to dbus_binding_tool_LDADD
- qt/Makefile.am: Add -no-undefined to libdbus_qt_1_la_LDFLAGS
- tools/Makefile.am: Add platform extentions to binaries
(i.e. .exe on windows)
* configure.in:
- Make it so if no suitable version of python is found we only
disable building python instead of exiting the configure script
- Require version 2.4 of glib for glib bindings
- Up version to 0.50
* python/__init__.py: Sync version with libdbus to (0,50,0)
2005-09-05 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-object-tree.c (find_subtree_recurse):
a couple of optimizations (bug #710):
- do a binary search in the tree
- insert a new child at the right place directly, no need for
qsort anymore
- do the "double alloc" thing when allocating children
2005-08-31 John (J5) Palmieri <johnp@redhat.com>
* python/Makefile.am: Break on pyrexc errors instead of ignoring them
* python/dbus_bindings.pyx: Memory management foo
(global): remove hacky _user_data_references global list
(GIL_safe_cunregister_function_handler): userdata now stuffed into
tuples. Unref user_data
(GIL_safe_cmessage_function_handler): userdata now stuffed into tuples
(Connection::__del__): Remove and replace with __dealloc__ method
(Connection::add_filter): Stuff user_data into a tuple. Use Py_INCREF
to keep tuple from being deallocated instead of the global var hack
(Connection::register_object_path): Stuff user_data into a tuple.
Use Py_INCREF to keep tuple from being deallocated instead of the
global var hack
(Connection::register_fallback): Stuff user_data into a tuple.
Use Py_INCREF to keep tuple from being deallocated instead of the
global var hack
(GIL_safe_pending_call_notification): Don't unref the message
because it gets unreffed when going out of scope. Py_XDECREF
the user_data
(PendingCall::__del__): Remove and replace with __dealloc__ method
(PendingCall::set_notify): ref the pending call because we will
need it to stick around for when the notify callback gets called
(Message::__del__): Remove and replace with __dealloc__ method
* python/dbus_glib_bindings.pyx (init_gthreads): Changed to
gthreads_init to match up with the dbus call
* python/glib.py (init_threads): Changed to threads_init to match
up with gobject.threads_init(). init_threads is kept for backwards
compat but will most likely be deprecated in the future
* test/python/test-client.py:
- revamp to use Python's unittest functionality
- add async call tests
- setup threads in glib and dbus so we make sure locks are working
2005-08-30 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx
(_pending_call_notification, cunregister_function_handler,
cmessage_function_handler): All callback functions have been rearranged
to workaround a bug in Pyrex when working with the GIL which is Python's
global lock when dealing with threads. They have been split into
a wrapper function (which assumes the name of the old function) and
a _GIL_safe_<function name> function which contains the functionality
of the old function. This ensures that Pyrex does not write code
the lock is released.
2005-08-30 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx (_pending_call_notification): Obtain the
GIL global lock when calling back into Python
2005-08-29 John (J5) Palmieri <johnp@redhat.com>
* Release 0.36.2
* Add Havoc's patch that never got applied to HEAD (Bug #2436):
* bus/policy.c (bus_policy_allow_user): change default "user is
allowed" to be "user has same uid as the bus itself"; any
allow/deny rules will override.
* bus/session.conf.in: don't allow all users, since now by default
the user that ran the bus can connect.
2005-08-26 Colin Walters <walters@verbum.org>
* tools/dbus-print-message.c (print_message): Flush stdout
after printing a message, so that redirecting to a file, then
hitting Ctrl-C works.
2005-08-25 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx: Tracked down a major memleak and fixed it
(EmptyMessage): new class that subclasses Message. This is a workaround
to a Pyrex bug that fails to call __del__ when the Message object goes out
of scope. For some reason subclassing Message fixes this bug
(Bus::send_with_reply_and_block): use EmptyMessage instead of Message
- s/Message(_create=0)/EmptyMessage everywhere else
* test/python/test-{server|client}.py: add the python/.libs directory
to the lookup path so dbus_bindings and dbus_glib_bindings don't
get picked up from the system
2005-08-25 Colin Walters <walters@verbum.org>
* glib/dbus-gproxy.c (dbus_g_proxy_call): Doc update, thanks
to Ryan Lortie for the suggestion.
2005-08-24 John (J5) Palmieri <johnp@redhat.com>
* test/python: Add python regression test
* configure.in: Add test/python/Makefile
* test/Makefile.am: Add the python directory to SUBDIRS
2005-08-24 John (J5) Palmieri <johnp@redhat.com>
* Release 0.36.1
* python/_dbus.py:
(Interface::connect_to_signal): propigate keywords for match on args
(Bus::add_signal_receiver): Fix typo s/dbus_inteface/dbus_interface
* python/proxies.py (ProxyObject::connect_to_signal):
propigate keywords for match on args
* Makefile.am: point everything to pyexecdir since python borks
on multilib
2005-08-23 John (J5) Palmieri <johnp@redhat.com>
* Release 0.36
2005-08-23 Colin Walters <walters@verbum.org>
* test/glib/Makefile.am: Don't multiply-define EXTRA_DIST.
2005-08-23 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_glib_bindings.pyx: reorder imports and c definitions
to fix some wranings. We now use dbus_bindings.DBusConnection instead
of defining DBusConnection ourselves.
2005-08-18 John (J5) Palmieri <johnp@redhat.com>
* python/dbus.pth: New path file to fix up problems when installing
c libraries to lib64 and python files to lib.
* python/Makefile.am: install dbus.pth in the correct spot
2005-08-17 John (J5) Palmieri <johnp@redhat.com>
* ChangeLog: clean up my last entry a bit
* doc/introspect.xsl: New stylesheet for converting introspection data
into browser renderable xhtml. Contributed by Lennart Poettering.
* doc/introspect.dtd: Fixups in the introspect format from Lennart
Poettering.
* doc/dbus-tutorial.xml:
- Add Colin Walter to the Authors section for authoring the GLib
section
- Add descriptions of the new signature and type functionality
in the Python complex type mapping section
- Add a sidenote on the new args matching functionality in
the Python bindings
- Fixed up some of the examples to use the gobject.MainLoop
instead of gtk.main
* python/_dbus.py:
(Bus::_create_args_dict): New. Converts a hash of arg matches
to a more useable format
(Bus::add_signal_receiver): add a **keywords parameter for catching
arg match parameters
(Bus::remove_signal_receiver): add a **keywords parameter for catching
arg match parameters
* python/matchrules.py:
(MatchTree::exec_matches): Check for arg matches
(SignalMatchRule::add_args_match): New method
(SignalMatchRule::execute): Added args_list parameter as an optimization
so we don't have to marshal the args more than once
(SignalMatchRule::match_args_from_list): New method that checks to see
if the rule's arg matches match an argument list. Only arguments
set in the rule are checked.
(SignalMatchRule::match_args_from_rule): New method that checks to see
if the rule's arg matches match another rule's. All args have to match
in order for this method to return true. If either rule has more args
then it is not a match.
(SignalMatchRule::is_match): Add args match
(SignalMatchRule::repr): Add args to the final output if they exist
2005-08-17 Ross Burton <ross@burtonini.com>
* glib/dbus-gproxy.c:
(dbus_g_proxy_call_no_reply): unref the message once sent.
(dbus_g_proxy_call): protect against NULL proxy.
2005-08-16 John (J5) Palmieri <johnp@redhat.com>
* python/__init__.py: Version updated (0, 43, 0)
* python/dbus_bindings.pyx:
- Fixed type objects to have self passed into __init__
- Added the Variant type
- Add the ability to specify types or signatures for Array, Variant
and Dictionary
(Connection::send_with_reply_handlers): return a PendingCall object
(_pending_call_notification): handle the case when an error is returned
without an error message in the body
(MessageIter::get_boolean): return True or False instead of an integer
(MessageIter::python_value_to_dbus_sig): add direct checking of types
and add checks for objects with embeded signatures or types (Array,
Variant and Dictionary)
(MessageIter::append_byte): handle case when the value is a dbus.Byte
(MessageIter::append_dict): handle embeded types or signatures
(MessageIter::append_array): handle embeded types or signatures
(MessageIter::append_variant): new method
* python/proxies.py:
(DeferedMethod): New. Dummy executable object used when queuing calls
blocking on introspection data
(ProxyMethod::__call__): add the timeout keyword for specifying longer
or shorter timeouts for method calls
(ProxyObject): Add first pass at an introspection state machine
(ProxyObject::__init__): Add introspect keyword for turing off an on
introspection.
(ProxyObject::_Introspect): Internal Introspect call that bypasses
the usual mechanisms for sending messages. This is to avoid a deadlock
where the Intospect call would be queued waiting for the Introspect
call to finish ;-)
(ProxyObject::_introspect_reply_handler): New. This method is called
when introspection returns with no error
(ProxyObject::_introspect_error_handler): New. This method is called
when introspection encounters an error
(ProxyObject::__getattr__): Code to handle different introspection
states. Queue async calls or block blocking calls if we are
introspecting. Pass through as normal if we are not or are done with
introspecting.
* python/service.py: Import signal and method from decorators.py
* python/types.py: Add Variant type
2005-08-16 Colin Walters <walters@verbum.org>
* glib/dbus-gobject.c (dbus_set_g_error): Don't lose if the
DBusError message is NULL.
2005-08-09 Havoc Pennington <hp@redhat.com>
* dbus/dbus-errors.c: apply patch from Timo Teras to make a
malloc'd copy of the name parameter
2005-08-09 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.c (dbus_message_set_reply_serial): print
warning if the reply serial is set to 0
2005-08-04 Colin Walters <walters@verbum.org>
* glib/dbus-gvalue-utils.h (_dbus_g_type_specialized_builtins_init)
(dbus_g_type_is_fixed, dbus_g_type_fixed_get_size)
(dbus_gvalue_set_from_pointer, dbus_g_hash_table_value_foreach)
(dbus_g_hash_table_insert_values, dbus_g_hash_table_insert_steal_values)
(dbus_gtype_is_valid_hash_key, dbus_gtype_is_valid_hash_value)
(dbus_g_hash_func_from_gtype, dbus_g_hash_free_from_gtype)
(dbus_g_hash_equal_from_gtype, dbus_gvalue_stor, dbus_gvalue_take):
* glib/dbus-gvalue.h (dbus_g_value_types_init)
(dbus_gvalue_demarshal, dbus_gvalue_demarshal_variant)
(dbus_gvalue_demarshal_message, dbus_gvalue_marshal):
Prefix name with _ to ensure they're not exported. All callers
updated.
* glib/dbus-gvalue.c (typecode_to_gtype)
(dbus_typecode_maps_to_basic, basic_typecode_to_gtype)
(signature_iter_to_g_type_dict)
(signature_iter_to_g_type_array)
(dbus_gtype_from_signature_iter, dbus_gtype_from_signature)
(dbus_gtypes_from_arg_signature):
Move to dbus-gsignature.c.
* glib/dbus-binding-tool-glib.c (dbus_binding_tool_output_glib_server): Call
dbus_g_type_specialized_builtins_init instead of dbus_g_value_types_init.
(dbus_binding_tool_output_glib_client): Ditto.
* glib/Makefile.am (DBUS_GLIB_INTERNALS): Add dbus-gsignature.c
and dbus-gsignature.h
* test/glib/test-service-glib.c (my_object_rec_arrays): Delete
unused variable.
2005-08-03 Colin Walters <walters@verbum.org>
* glib/dbus-gobject.c: Add tests on hardcoded object info; this should
catch any incompatible changes accidentally made.
2005-08-03 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.c (_dbus_read_credentials_unix_socket): fix
typo, from Julien Puydt
* bus/connection.c (bus_connection_disconnected): we were always
doing a wait_for_memory due to a buggy loop, found by Timo Hoenig
2005-08-01 Colin Walters <walters@verbum.org>
Patch from Joe Markus Clarke:
* glib/dbus-gidl.c (property_info_unref, arg_info_unref): Fix
use-after-free.
2005-08-01 Colin Walters <walters@verbum.org>
Patch from Joe Markus Clarke:
* tools/dbus-send.c (main):
Don't use C99 style initializers (bug #3933).
2005-08-01 Colin Walters <walters@verbum.org>
Patch from Joe Markus Clarke:
* glib/dbus-gvalue.c (dbus_g_value_types_init):
* glib/dbus-gvalue-utils.c (dbus_g_type_specialized_builtins_init)
* glib/dbus-gobject.c (write_interface):
Don't use C99 style initializers (bug #3933).
2005-07-31 Havoc Pennington <hp@redhat.com>
* tools/dbus-viewer.c (load_child_nodes): fix invocation of
dbus_g_proxy_call, fix from Piotr Zielinski bug #3920
2005-07-30 Havoc Pennington <hp@redhat.com>
* fix a bunch of Doxygen warnings and mistakes
2005-07-30 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.c (_dbus_string_parse_uint): remove #ifdef
DBUS_BUILD_TESTS since it's now used in production code
2005-07-29 Havoc Pennington <hp@redhat.com>
* test/glib/test-profile.c (write_junk): initialize the junk
buffer so valgrind doesn't have a breakdown
2005-07-29 Havoc Pennington <hp@redhat.com>
* bus/signals.c (bus_signals_test): add match_rule_equal() tests
(match_rule_matches): remove unused arg
(test_matching): add tests for match_rule_matches()
* bus/signals.c (bus_match_rule_parse_arg_match): add ability to
do arg0='foo' arg5='bar' in the match rules
(match_rule_matches): don't match if the arg0='foo' doesn't match.
* dbus/dbus-protocol.h (DBUS_MAXIMUM_MATCH_RULE_ARG_NUMBER): add this
2005-07-29 Ross Burton <ross@openedhand.com>
* dbus/dbus-connection.c:
Don't create a DBusCondVar which is never used.
2005-07-27 Ross Burton <ross@openedhand.com>
* dbus/dbus-message.c:
Reduce the size of the maximum cached message to 10K.
2005-07-25 Ross Burton <ross@openedhand.com>
* glib/dbus-gproxy.c:
Remove matches when all proxies are unregistered.
2005-07-24 Colin Walters <walters@verbum.org>
* glib/dbus-gvalue.c (signature_iter_to_g_type_array): Don't require
typedata; recursive arrays won't have it.
* test/glib/test-dbus-glib.c:
* test/glib/test-service-glib.c:
* test/glib/test-service-glib.xml: Add recursive arrays tests.
2005-07-20 John (J5) Palmieir <johnp@redhat.com>
* python/_dbus.py, _util.py, decorators.py, extract.py, matchrules.py.
proxies.py, service.py: Cleanup of code after running it through the
pyflakes code checker mostly dealing with undefined names.
(Bug #3828, Patch from Anthony Baxter <anthony@interlink.com.au>)
2005-07-17 John (J5) Palmieri <johnp@redhat.com>
* NEWS: Update to 0.35.2
2005-07-17 John (J5) Palmieri <johnp@redhat.com>
* python/_dbus.py: Remove import of the dbus.services
module as it no longer exists (patch from Dimitur Kirov)
* python/service.py (Object::__init__): Fixed typo
s/name/bus_name (patch from Dimitur Kirov)
* python/examples/example-signal-emitter.py: import dbus.glib
to get the main loop and use glib mainloop instead of gtk so
X doesn't have to be running.
* python/examples/example-signal-recipient.py: import dbus.glib
to get the main loop and use glib mainloop instead of gtk so
X doesn't have to be running. Import the decorators module
directly.
* test/glib/Makefile.am: Added DIST_EXTRA files that distcheck
didn't pick up on but are needed to build
* configure.in: upped version to 0.35.2
* bus/driver.c, bus/selinux.c, bus/selinux.h, dbus/dbus-protocol.h:
added Colin Walters' SELinux API rename patch from head
s/unix sercurity context/selinux security context/
2005-07-16 John (J5) Palmieri <johnp@redhat.com>
* python/Makefile.am: dbus_binding.pxd.in should be included
in EXTRA_DIST not dbus_binding.pxd
fix up $(srcdir) hopefully for the last time
* NEWS: Update to 0.35.1
2005-07-16 Colin Walters <walters@verbum.org>
* bus/driver.c (bus_driver_handle_get_connection_selinux_security_context): Renamed
from bus_driver_handle_get_connection_unix_security_context. Update for
error usage.
(message_handlers): Update for renames.
* bus/selinux.c (bus_selinux_allows_send): Handle OOM on
_dbus_string_init failure correctly.
(bus_selinux_append_context): Convert SID to context. Append it
as a byte array.
(bus_selinux_shutdown): Handle the case where bus_selinux_full_init
hasn't been called.
* bus/selinux.h: Update prototype.
* dbus/dbus-protocol.h (DBUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN): Renamed
from DBUS_ERROR_UNIX_SECURITY_CONTEXT_UNKNOWN.
2005-07-15 Colin Walters <walters@verbum.org>
* doc/TODO: Add note about convenience wrappers.
2005-07-15 John (J5) Palmieri <johnp@redhat.com>
* NEWS: Update to 0.35
2005-07-15 John (J5) Palmieri <johnp@redhat.com>
* glib/Makefile.am: Add make-dbus-glib-error-switch.sh to EXTRA_DIST
so distcheck doesn't fail
* glib/examples/Makefile.am: Add example-service.xml and
example-signal-emitter.xml to EXTRA_DIST so distcheck doesn't fail
* glib/examples/statemachine/Makefile.am: Add statemachine.xml and
statemachine-server.xml to EXTRA_DIST so distcheck doesn't fail
* python/Makefile.am: Preprend $(srcdir)/ to source files so the
compiler looks in the right places during distcheck
2005-07-15 John (J5) Palmieri <johnp@redhat.com>
* glib/example/Makefile.am: Fix a typo which cause make distcheck
to fail
2005-07-15 John (J5) Palmieri <johnp@redhat.com>
* python/examples/example-service.py,
python/examples/example-signal-emitter.py: Fixed up examples
for API changes
2005-07-15 John (J5) Palmieri <johnp@redhat.com>
* python/__init__.py: Upped to version (0,42,0) because of
the API change
2005-07-15 John (J5) Palmieri <johnp@redhat.com>
* ChangeLog: fix date in last entry
* configure.in, bus/system.conf.in: add the ability to configure
the system bus user at compiletime with the --with-dbus-user flag
(patch from Kristof Vansant)
2005-07-15 John (J5) Palmieri <johnp@redhat.com>
* bus/dispatch.c, test/test-service.c: Add testcase
for sending messages to oneself (TODO item).
* python/service.py (class Object): Swap ordering of bus_name
and object_path parameters to better support inheritance.
* doc/dbus-tutorial.xml: change Python docs to reflect change
in parameter ordering and fix the inheritance section.
* doc/TODO: remove sending message to oneself TODO item
2005-07-15 Ross Burton <ross@openedhand.com>
* glib/dbus-gproxy.c:
Fix a leak when calling methods via the proxy.
2005-07-15 Colin Walters <walters@verbum.org>
* bus/selinux.c (bus_selinux_append_context): Wrap in
HAVE_SELINUX.
2005-07-14 John (J5) Palmieri <johnp@redhat.com>
* python/_dbus.py (Bus::remove_signal_receiver):
don't add a callback to the match if none has been passed in
* python/matchrules.py (SignalMatchTree::remove): if the rule
being matched does not have a callback treat it as a wildcard
fix matching logic
* doc/dbus-tutorial.xml: Add Python tutorial
2005-07-14 Colin Walters <walters@verbum.org>
* bus/driver.c
(bus_driver_handle_get_connection_unix_security_context): New function.
(message_handlers): Add.
* bus/selinux.c (bus_selinux_append_context): New function; appends
security context to message.
* bus/selinux.h: Prototype.
* dbus/dbus-protocol.h (DBUS_ERROR_UNIX_SECURITY_CONTEXT_UNKNOWN): New.
2005-07-14 John (J5) Palmieri <johnp@redhat.com>
* bus/activation.c: clean up all tabs to be 8 spaces
(bus_activation_activate_service): make sure we clean up
if activation fails
* bus/dispatch.c: clean up all tabs to be 8 spaces
(check_shell_fail_service_auto_start): New function
tests to make sure we get fail properly when trying to auto start a service
with a faulty command line
(check_shell_service_success_auto_start): New function tests to make sure
auto started services get the arguments on the command line
* test/test-shell-service.c: Added service for testing auto-starting with
command line arguments
* test/data/valid-service-files/debug-shell-echo-fail.service.in,
test/data/valid-service-files/debug-shell-echo-success.service.in:
Added service files for testing auto-starting with command line arguments
* */.cvsignore: added a bunch of generated files to various .cvsignore files
2005-07-14 Rodrigo Moya <rodrigo@novell.com>
* dbus/dbus-shell.[ch]: copy/pasted code from GLib.
* dbus/Makefile.am: added new files to build.
* bus/activation.c (bus_activation_activate_service): support
activation commands with parameters.
* test/shell-test.c: added test program for the shell parsing
code.
2005-07-13 David Zeuthen <davidz@redhat.com>
* tools/dbus-send.c (append_arg, type_from_name): Also support 16 and
64 bit signed and unsigned parameters
2005-07-13 John (J5) Palmieri <johnp@redhat.com>
* python/.cvsignore: remove dbus_bindings.pyx, add dbus_bindings.pxd
* python/service.py (class Name): renamed BusName to make it clearer
what the object is for (a name on the bus)
* python/examples/example-service.py,
python/examples/example-signal-emitter.py: change the Name object to
BusName
2005-07-12 Colin Walters <walters@verbum.org>
Patch from Jim Gettys <Jim.Gettys@hp.com>.
* tools/dbus-launch.c: Include sys/select.h.
2005-07-12 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx.in: removed
* python/dbus_bindings.pyx: Added.
- Fixed some memleaks (patch from
Sean Meiners <sean.meiners@linspireinc.com>)
- Broke out the #include "dbus_h_wrapper.h" and put it in its
own pxd file (Pyrex definition)
- Broke out glib dependancies into its own pyx module
* python/dbus_bindings.pdx: Added.
- Defines C class Connection for exporting to other modules
* python/dbus_glib_bindings.pyx: Added.
- New module to handle lowlevel dbus-glib mainloop integration
* python/glib.py: Added.
- Registers the glib mainloop when you import this module
* python/services.py: Removed (renamed to service.py)
* python/service.py: Added.
- (class Server): renamed Name
* python/__init__.py: Bump ro version (0,41,0)
-don't import the decorators or service module
by default. These now reside in the dbus.service namespace
* python/_dbus.py (Bus::__init__): Add code run the main loop
setup function on creation
* python/examples/example-service.py,
python/examples/example-signal-emitter.py: update examples
* python/examples/gconf-proxy-service.py,
python/examples/gconf-proxy-service2.py: TODO fix these up
* doc/TODO: Addition
- Added a Python Bindings 1.0 section
- added "Add match on args or match on details to match rules"
2005-07-12 Colin Walters <walters@verbum.org>
* glib/examples/statemachine/Makefile.am (statemachine-server-glue.h)
(statemachine-glue.h):
* glib/examples/Makefile.am (example-service-glue.h)
(example-signal-emitter-glue.h):
* glib/Makefile.am (dbus-glib-error-switch.h):
Add libtool --mode=execute so we use the built library instead
of any installed one.
2005-07-11 Colin Walters <walters@verbum.org>
* glib/dbus-gvalue.c (struct _DBusGValue): Delete.
(dbus_g_value_types_init): Remove assertion.
(dbus_g_value_get_g_type, dbus_g_value_open)
(dbus_g_value_iterator_get_values, dbus_g_value_get_signature)
(dbus_g_value_copy, dbus_g_value_free): Delete unimplemented
functions related to DBusGValue. Now we marshal/demarshal
structures as GValueArray.
(dbus_gtype_from_signature_iter): Return G_TYPE_VALUE_ARRAY for
structures.
(signature_iter_to_g_type_array): Don't call
signature_iter_to_g_type_struct.
(signature_iter_to_g_type_struct): Delete.
(dbus_gvalue_to_signature): Delete.
(dbus_gvalue_to_signature): New function with same name as other
one; we can convert structures to signatures.
(demarshal_valuearray): New function.
(get_type_demarshaller): Use it.
(demarshal_recurse): Delete.
(marshal_proxy): New function.
(marshal_map): Warn if we can't determine signature from type.
(marshal_collection_ptrarray): Ditto.
(marshal_collection_array): Ditto.
(get_type_marshaller): Use marshal_valuearray.
(marshal_recurse): Delete.
(_dbus_gvalue_test): Add some tests.
* dbus/dbus-glib.h (struct _DBusGValueIterator):
(dbus_g_value_get_g_type, DBUS_TYPE_G_VALUE)
(dbus_g_value_open, dbus_g_value_iterator_get_value)
(dbus_g_value_iterator_get_values, dbus_g_value_iterator_recurse)
(dbus_g_value_free): Remove prototypes.
* glib/dbus-binding-tool-glib.c (dbus_g_type_get_lookup_function): Handle
G_TYPE_VALUE_ARRAY.
* glib/examples/example-service.c:
* glib/examples/example-client.c: Implement GetTuple.
* test/glib/test-dbus-glib.c:
* test/glib/test-service-glib.c:
* test/glib/test-service-glib.xml: Add structure tests.
2005-07-10 Colin Walters <walters@verbum.org>
* doc/TODO: Knock off some GLib items with this patch.
* glib/dbus-gvalue-utils.c (_dbus_gtype_can_signal_error)
(_dbus_gvalue_signals_error): New functions.
* glib/dbus-gvalue-utils.h: Prototype them.
* glib/dbus-gobject.c (arg_iterate): Update to handle return vals
and change to not output const/retval flags for input args. All
callers updated.
(invoke_object_method): Refactor to handle return values. Add
some more comments in various places. Remove debug g_print.
* glib/dbus-binding-tool-glib.h (DBUS_GLIB_ANNOTATION_RETURNVAL): New.
* glib/dbus-binding-tool-glib.c (dbus_g_type_get_marshal_name):
Handle G_TYPE_NONE.
(compute_gsignature): New function; refactored from code from
compute_marshaller and compute_marshaller_name. Enhance to
handle return values and async ops more cleanly. Update for
async ops returning NONE instead of BOOLEAN.
(compute_marshaller, compute_marshaller_name): Call compute_gsignature
and output appropriate string.
(generate_glue): Handle return value annotation. Also don't dump
constness flag for input arguments.
* glib/Makefile.am (DBUS_GLIB_INTERNALS): New variable; contains
files shared between installed library and utilities.
(libdbus_glib_1_la_SOURCES): Move some stuf into DBUS_GLIB_INTERNALS.
(libdbus_gtool_la_SOURCES): Suck in DBUS_GLIB_INTERNALS so the
binding tool can access gtype utility functions.
* test/glib/test-service-glib.c:
* test/glib/test-service-glib.xml:
* test/glib/test-dbus-glib.c: Add some tests for return values.
2005-07-09 Colin Walters <walters@verbum.org>
* glib/dbus-gparser.c (parse_annotation): Add annotations to
argument if available, not method.
* glib/dbus-gobject.c (arg_iterate): More verbose warnings.
(invoke_object_method): First, remove some redundant
GValues (object_value, error_value) in favor of working on
array directly. Second, rework constness to be less buggy.
Now we iterate directly over the argument metadata instead
of parallel iterating over output signature and metadata.
* glib/dbus-glib-tool.h: Add INVALID_ANNOTATION error.
* glib/dbus-binding-tool-glib.c (generate_glue): Barf on const
annotation on input args.
2005-07-09 Colin Walters <walters@verbum.org>
* glib/dbus-binding-tool-glib.h (DBUS_GLIB_ANNOTATION_CONST):
Define.
* glib/dbus-binding-tool-glib.c (generate_glue): Handle Const
annotation.
* glib/dbus-gobject.c (arg_iterate): Update to parse constval too.
(method_dir_signature_from_object_info): Handle arg_iterate change.
(write_interface): Ditto.
(lookup_object_info): Don't barf if format_version is > 0.
(invoke_object_method): Handle arg constness.
* glib/dbus-gidl.c (struct ArgInfo): Add annotations.
(arg_info_new): Create.
(arg_info_unref): Destroy.
(arg_info_get_annotations, arg_info_get_annotation)
(arg_info_add_annotation): New functions.
* glib/dbus-gidl.h: Prototype them.
* glib/dbus-gparser.c (parse_annotation): Allow annotations in
args, disallow them in properties.
(parse_annotation): Handle arg annotations.
* test/glib/test-service-glib.xml:
* test/glib/test-service-glib.c: Update to make some methods
const.
2005-07-08 Colin Walters <walters@verbum.org>
* test/glib/test-service-glib.xml:
* test/glib/test-service-glib.c:
* test/glib/test-dbus-glib.c: Test a{sv}.
* glib/examples/statemachine/statemachine.c:
* glib/examples/statemachine/statemachine-server.c:
* glib/examples/statemachine/statemachine-client.c: Fix some bugs,
add progress bar, etc.
* glib/dbus-gvalue.c (register_array, register_dict): Delete; not
needed anymore due to generic array/map marshalling.
(dbus_g_value_types_init): Don't register basic arrays or the
string/string hash.
(dbus_gtype_from_signature_iter): Don't try to recurse into
variants.
(dbus_gtype_to_signature): Check collection/map before type
metadata.
(demarshal_garray_basic): Renamed to demarshal_collection_array.
(demarshal_ghashtable): Renamed to demarshal_map; fix to use new
generic map creation/append functions instead of hash table
specifically.
(get_type_demarshaller): Handle maps.
(demarshal_collection): Dispatch on collection type to either
demarshal_collection_ptrarray or demarshal_collection_array.
(get_type_marshaller): Handle maps.
(marshal_collection): Dispatch collection type to either
marshal_collection_ptrarray or marshal_collection_array.
(_dbus_gvalue_test): New test.
* glib/dbus-gvalue-utils.c (unset_and_free_g_value): New function.
(hash_free_from_gtype): Use it to free GValues.
(hashtable_append): New function.
(ptrarray_append): Fix prototype.
(slist_append): Ditto.
(_dbus_gvalue_utils_test): Extend tests.
* glib/dbus-gtype-specialized.c
(dbus_g_type_specialized_init_append): Renamed from
dbus_g_type_specialized_collection_init_append. Remove const from
value, since we steal it.
(dbus_g_type_specialized_map_append): New function.
* glib/dbus-gtype-specialized.h: Update prototypes.
Add DBusGTypeSpecializedMapAppendFunc.
* glib/dbus-gtest.c (dbus_glib_internal_do_not_use_run_tests): Run
_dbus_gvalue_test.
* glib/dbus-gtest.h: Prototype it.
2005-07-08 Ross Burton <ross@openedhand.com>
* dbus/dbus-glib.h:
Add DBysGAsyncData for the async bindings.
* glib/dbus-binding-tool-glib.c:
Re-enable the async bindings.
* test/glib/test-dbus-glib.c:
Add a test for the generated async bindings.
2005-07-08 Colin Walters <walters@verbum.org>
* doc/TODO: Update GLib todo bits, also add a post-1.0 TODO for a
connection concept.
2005-07-08 Colin Walters <walters@verbum.org>
* tools/Makefile.am: Kill of print-introspect in favor of using
dbus-send --print-reply=literal.
* test/glib/test-service-glib.xml:
* test/glib/test-service-glib.c (my_object_get_objs): New test
for "ao".
* test/glib/test-dbus-glib.c (echo_received_cb): Free echo data.
(main): Test GetObjs.
* glib/examples/statemachine/Makefile.am:
* glib/examples/statemachine/sm-marshal.list:
* glib/examples/statemachine/statemachine-client.c:
* glib/examples/statemachine/statemachine-server.c:
* glib/examples/statemachine/statemachine-server.xml:
* glib/examples/statemachine/statemachine.c:
* glib/examples/statemachine/statemachine.h:
* glib/examples/statemachine/statemachine.xml:
New example.
* glib/examples/example-service.c (main): Move invocation
of dbus_g_object_type_install_info earlier, to emphasize it
should only be done once.
* glib/examples/example-signal-emitter.c (main): Ditto.
* glib/examples/Makefile.am (SUBDIRS): Include statemachine.
* glib/dbus-gvalue.h (dbus_gtype_to_signature)
(dbus_gvalue_marshal): Update prototypes.
* glib/dbus-gvalue.c: Update all marshalling functions to take
const GValue instead of GValue.
(signature_iter_to_g_type_array): Return a GPtrArray for nonfixed
types.
(dbus_gvalue_to_signature): Update for dbus_gtype_to_signature
change.
(dbus_gtype_to_signature): Handle generic collecitons and maps.
Return a newly-allocated string.
(demarshal_proxy, demarshal_object_path, demarshal_object)
(demarshal_strv, demarshal_ghashtable): Set error, don't assert if
we get the wrong types from message.
(get_type_demarshaller): New function, extracted from
dbus_gvalue_demarshal.
(demarshal_collection): New function, demarshals generic
collection.
(dbus_gvalue_demarshal): Just invoke result of
get_type_demarshaller. Throw error if we don't have one.
(marshal_garray_basic): Abort on OOM.
(get_type_marshaller): New function, extracted from
dbus_gvalue_marshal.
(collection_marshal_iterator, marshal_collection): New functions;
implements generic marshalling for an iteratable specialized
collection.
(dbus_gvalue_marshal): Just invoke result of get_type_marshaller.
* glib/dbus-gvalue-utils.c (gvalue_from_ptrarray_value): Handle
G_TYPE_STRING.
(ptrarray_value_from_gvalue): Ditto.
(ptrarray_append, ptrarray_free): New functions.
(slist_constructor, slist_iterator, slist_copy_elt, slist_copy)
(slist_append, slist_end_append, slist_free): New functions.
(dbus_g_type_specialized_builtins_init): Add append fuctions
for GPtrArray and GSList. Register GSList.
(test_specialized_hash, _dbus_gvalue_utils_test): New functions.
* glib/dbus-gtype-specialized.h (DBusGTypeSpecializedAppendContext):
New.
(dbus_g_type_specialized_collection_init_append)
(dbus_g_type_specialized_collection_append)
(dbus_g_type_specialized_collection_end_append): Prototype.
(DBusGTypeSpecializedCollectionVtable): Add append_func and
end_append_func.
* glib/dbus-gtype-specialized.c (dbus_g_type_specialized_collection_init_append)
(dbus_g_type_specialized_collection_append)
(dbus_g_type_specialized_collection_end_append): New functions.
(dbus_g_type_map_value_iterate): Take const GValue.
(dbus_g_type_collection_value_iterate): Ditto.
* glib/dbus-gtest.c (dbus_glib_internal_do_not_use_run_tests): Run
_dbus_gvalue_utils_test.
* glib/dbus-gtest.h: Prototype it.
* glib/dbus-gproxy.c (dbus_g_proxy_manager_filter): Avoid
using uninitialized owner_list.
(dbus_g_proxy_begin_call_internal): Move return_if_fail to
public API.
(dbus_g_proxy_end_call_internal): Update to use error set
from dbus_gvalue_demarshal instead of setting it here.
(dbus_g_proxy_begin_call): Move return_if_fail here.
* glib/dbus-gobject.c (write_interface): Update for
dbus_gtype_to_signature returning new string.
* configure.in: Add glib/examples/statemachine.
2005-07-08 Joe Shaw <joeshaw@novell.com>
* configure.in: Add a configure option, --with-console-auth-dir
* dbus/dbus-sysdeps-util.c (_dbus_user_at_console): Use the
new setting. Patch from Kay Sievers.
2005-07-06 Colin Walters <walters@verbum.org>
* dbus/dbus-glib.h (DBusGPendingCall, DBusGPendingCallNotify)
(DBUS_TYPE_G_PENDING_CALL, dbus_g_pending_call_get_g_type)
(dbus_g_pending_call_ref, dbus_g_pending_call_unref): Delete.
(dbus_g_pending_call_set_notify, dbus_g_pending_call_cancel):
Delete in favor of dbus_g_proxy_begin_call and
dbus_g_proxy_cancel_call.
(DBusGProxyCall, DBusGProxyCallNotify): New.
(dbus_g_proxy_begin_call): Change prototype to take callback, user
data, and destroy function. This replaces
dbus_g_pending_call_set_notify.
(dbus_g_proxy_cancel_call): Prototype.
(DBusGAsyncData): Delete, shouldn't be needed anymore.
* glib/dbus-gproxy.c (struct _DBusGProxy): Add call_id_counter and
pending_calls map.
(struct _DBusGProxyManager): Add bus_proxy member, which is an
internal proxy for calls to the bus. Remove
pending_nameowner_calls, now the internal proxy keeps track.
(dbus_g_proxy_manager_unref): Unref bus proxy, remove reference to
pending_nameowner_calls.
(got_name_owner_cb): Update prototype, and use
dbus_g_proxy_end_call.
(got_name_owner_cb): Remove reference to pending_nameowner_calls.
(dbus_g_proxy_manager_register): Delete directly libdbus code in
favor of using internal proxy.
(dbus_g_proxy_manager_unregister): Update to use
dbus_g_proxy_cancel_call for any pending GetNameOwner call.
(dbus_g_proxy_init): Initialize pending calls map.
(dbus_g_proxy_constructor): New.
(dbus_g_proxy_class_init): Add get/set property functions,
constructor, and add NAME, PATH, and INTERFACE properties.
(cancel_pending_call): New function.
(dbus_g_proxy_dispose): Iterate over any outstanding calls and
cancel them.
(dbus_g_proxy_set_property, dbus_g_proxy_get_property): New.
(GPendingNotifyClosure): New structure.
(d_pending_call_notify, d_pending_call_free): Moved here from
dbus-glib.c.
(DBUS_G_VALUE_ARRAY_COLLECT_ALL): Moved around to satisfy function
ordering.
(manager_begin_bus_call): New internal function for talking to
internal bus proxy.
(dbus_g_proxy_new): Construct object using GObjet properties.
(dbus_g_proxy_begin_call_internal): Update to take user data, etc.
Create closure of same, and insert call into map of pending calls.
(dbus_g_proxy_end_call_internal): Take call id instead of pending
call. Look up pending call in current set. Remove it when we've
completed.
(dbus_g_pending_call_end, dbus_g_proxy_end_call_internal): Delete.
(dbus_g_proxy_begin_call): Change API to take callback, user data,
and destroy function directly.
(dbus_g_proxy_end_call): Update to take DBusGProxyCall.
(dbus_g_proxy_call): Invoke with NULL callback.
(dbus_g_proxy_cancel_call): New function, replaces
dbus_g_pending_call_cancel.
* glib/dbus-gparser.c (validate_signature): Fix call to
dbus_set_g_error.
* glib/dbus-gobject.c (dbus_g_object_type_dbus_metadata_quark):
New quark for attaching metadata to GType.
(info_hash): Delete.
(lookup_object_info): Look up using quark.
(dbus_g_object_type_install_info): Check that a type is classed,
not that it's an object. Also just install type data using quark
instead of using global hash.
* glib/dbus-glib.c (dbus_g_pending_call_ref)
(dbus_g_pending_call_unref, dbus_pending_call_get_g_type)
(GPendingNotifyClosure): Delete.
(d_pending_call_notify, d_pending_call_free): Move to dbus-gproxy.c.
(dbus_g_pending_call_set_notify, dbus_g_pending_call_cancel): Delete.
* glib/dbus-binding-tool-glib.c (generate_client_glue): Disable async
client method generation until we can fix it...
* tools/dbus-viewer.c (load_child_nodes): Use dbus_g_proxy_call.
(load_from_service_thread_func): Ditto.
* tools/dbus-names-model.c (struct NamesModel): Hold
DBusGProxyCall.
(have_names_notify): Update prototype, use
dbus_g_proxy_cancel_call.
(names_model_reload): Update for new dbus_g_proxy_begin_call API.
* tools/dbus-monitor.c (filter_func): Update for print_message
API change.
* test/glib/test-dbus-glib.c: Add more tests for async
invocations. Update many begin_call/end_call pairs to just use
dbus_g_proxy_call.
* tools/dbus-send.c (main): Add --print-reply=literal mode. This
allows us to dump print-introspect.c.
* tools/dbus-print-message.h (print_message): Add literal argument
to print_message which is intended to allow printing arguments without
metadata like "string=".
* tools/dbus-print-message.c (print_iter): Add literal argument.
(print_message): Allow printing string messages literally.
2005-07-05 Colin Walters <walters@verbum.org>
* glib/dbus-gproxy.c (marshal_dbus_message_to_g_marshaller):
Remove value refcount leak, original patch from Jorn Baayen
<jorn@openedhand.com>. Also remove useless extra value in favor
of prepending to value array directly.
2005-07-02 Colin Walters <walters@verbum.org>
* glib/dbus-gmain.c (_dbus_gmain_test): Fix test.
2005-07-01 Colin Walters <walters@verbum.org>
Patch from Jonathan Matthew <jonathan@kaolin.hn.org>
* glib/dbus-gvalue.c (basic_typecode_to_gtype): Fix return type.
(dbus_g_value_types_init): Marshal G_TYPE_CHAR as DBUS_TYPE_BYTE,
G_TYPE_LONG as DBUS_TYPE_INT32, G_TYPE_ULONG as DBUS_TYPE_UINT32,
and G_TYPE_FLOAT as DBUS_TYPE_DOUBLE.
2005-06-30 Colin Walters <walters@verbum.org>
* test/glib/test-dbus-glib.c:
* test/glib/test-service-glib.c:
* test/glib/test-service-glib.xml: Update tests for new error
setting bits, also add async tests (patch from Ross Burton).
* test/glib/Makefile.am (test_service_glib_LDADD): Add
DBUS_GLIB_THREADS_LIBS.
* glib/dbus-gproxy.c (get_name_owner)
(dbus_g_pending_call_end_valist): Ditto.
* glib/dbus-gobject.c (error_metadata): New mapping from GError
domain (GQuark) to DBusGErrorInfo.
(gerror_domaincode_to_dbus_error_name): Attempt to look up error
quark in error_metadata. Take message interface as default
error message interface.
(gerror_to_dbus_error_message): Pass message interface.
(dbus_set_g_error): Resurrected.
(dbus_g_error_info_free): New function.
(dbus_g_object_type_install_info): Use g_type_class_ref instead
of _peek to actually create the object class if it hasn't been
created yet.
(dbus_g_error_domain_register): New function.
* glib/dbus-gmain.c (dbus_g_bus_get): Switch to dbus_set_g_error.
* glib/dbus-gparser.c (validate_signature): Ditto.
* dbus/dbus-glib.h (dbus_g_error_set): Delete.
(dbus_g_error_domain_register): Prototype.
* glib/dbus-glib.c (dbus_g_error_set): Delete.
Update tests.
2005-06-29 Colin Walters <walters@verbum.org>
* dbus/dbus-glib.h: Delete DBUS_TYPE_G_PROXY_ARRAY. Add
DBUS_TYPE_G_OBJECT_PATH.
* glib/dbus-gvalue.c (dbus_g_value_types_init): Remove marshallers
for G_TYPE_OBJECT and DBUS_TYPE_G_PROXY_ARRAY (the latter should
be handled more generically). Add DBUS_TYPE_G_OBJECT_PATH.
(dbus_g_object_path_get_g_type): New function.
(dbus_gtype_from_signature_iter): Map DBUS_TYPE_OBJECT_PATH
to DBUS_TYPE_G_OBJECT_PATH by default.
(demarshal_proxy): Remove unused name variable.
(demarshal_object_path, marshal_object_path): New functions.
(demarshal_proxy_array, marshal_proxy_array): Delete.
* glib/dbus-binding-tool-glib.c (dbus_g_type_get_c_name): Map
DBUS_TYPE_G_OBJECT_PATH to char *.
(dbus_g_type_get_lookup_function): Map builtin
DBUS_TYPE_G_OBJECT_PATH.
* test/glib/test-dbus-glib.c
* test/glib/test-service-glib.c (my_object_objpath):
Adapt tests to new object path marshalling.
2005-06-29 John (J5) Palmieri <johnp@redhat.com>
* configure.in: force check for Python >= 2.4
2005-06-29 Colin Walters <walters@verbum.org>
Patch from Ross Burton <ross@openedhand.com>
* glib/dbus-gobject.c (invoke_object_method): Unset object
value in all cases, not only in async case.
2005-06-29 Colin Walters <walters@verbum.org>
* glib/dbus-gproxy.c (struct _DBusGProxy): Add new member
name_call for keeping track of any outgoing GetNameOwner call.
Also add for_owner and associated.
(struct _DBusGProxyManager): Add owner_names, which is hash table
that maps a base name to a list of names it owns (that we're
interested in). Add pending_nameowner_calls which is a list of
all outstanding GetNameOwner; avoids us having to iterate over
every proxy. Add unassociated_proxies which keeps track of name
proxies with no associated name owner.
(dbus_g_proxy_manager_unref): Destroy owner_names.
(struct DBusGProxyNameOwnerInfo): New struct for keeping track of
name refcounts.
(find_name_in_info, name_owner_foreach)
(dbus_g_proxy_manager_lookup_name_owner, insert_nameinfo)
(dbus_g_proxy_manager_monitor_name_owner)
(dbus_g_proxy_manager_unmonitor_name_owner)
(unassociate_proxies, dbus_g_proxy_manager_replace_name_owner):
New functions; they manipulate the owner_names mapping.
(got_name_owner_cb): New function.
(get_name_owner): New function, extracted from
dbus_g_proxy_new_for_name_owner.
(dbus_g_proxy_manager_register): For now we need to keep track of
all NameOwnerChanged. Also if the proxy is for a name, if we
don't already know the name owner, queue a new GetNameOwner
request and add it to our list of unassociated proxies. Otherwise
inc the refcount.
(dbus_g_proxy_manager_unregister): If this proxy is for a name,
cancel any pending GetNameOwner call, etc.
(dbus_g_proxy_manager_filter): Handle NameOwnerChanged. Also use
the owner_names mapping to look up the current names for the
signal source, and dispatch to any proxies for that name.
(dbus_g_proxy_new): Initialize new members.
(dbus_g_proxy_new_for_name): Delete unused proxy variable.
(dbus_g_proxy_new_for_name_owner): Use get_name_owner.
(dbus_g_pending_call_end_valist): New function, extracted from
dbus_g_proxy_end_call_internal. Useful when we don't have a proxy
but want to use the GLib infrastructure. Also note how many
arguments in reply were over.
(dbus_g_pending_call_end): New function, just call
dbus_g_pending_call_end_valist.
(dbus_g_proxy_end_call_internal): Just call
dbus_g_pending_call_end_valist.
* glib/dbus-gobject.c (_dbus_gobject_lookup_marshaller): Fix lookup
of builtin marshaller for STRING_STRING_STRING.
* test/glib/test-dbus-glib.c:
* test/glib/test-service-glib.c:
* test/glib/test-service-glib.xml:
Extend tests to cover name proxies, destruction of owner proxies,
etc.
* glib/examples/example-signal-recipient.c
(dbus_g_proxy_new_for_name_owner): Create a name proxy.
* tools/dbus-send.c (main): Print D-BUS error name in addition
to message.
2005-06-28 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx.in (cunregister_function_handler,
cmessage_function_handler): Patch from
Anthony Baxter <anthony@interlink.com.au> fixes threading problems
by using the Py_GILState_Ensure/Release to synchronize with the
python runtime.
2005-06-28 Ray Strode <rstrode@redhat.com>
* dbus/dbus-spawn.c (_dbus_babysitter_unref): kill
babysitter helper process on last unref, bug #2813.
2005-06-27 Colin Walters <walters@verbum.org>
* test/glib/test-dbus-glib.c:
* test/glib/test-service-glib.c:
* test/glib/test-service-glib.xml:
Test hash table signal emitting.
* glib/dbus-gobject.c (_dbus_gobject_lookup_marshaller): Convert
types to their fundamental basis types, since this is what
marshallers operate on. Also add an entry for VOID__BOXED.
(dbus_g_object_register_marshaller_array): Convert to fundamental.
2005-06-26 Havoc Pennington <hp@redhat.com>
* doc/dbus-tutorial.xml: fix names of interface/service/path, fix
from Don Park
2005-06-26 Colin Walters <walters@verbum.org>
* glib/dbus-glib.c (dbus_set_g_error): Delete.
(dbus_g_error_set): New public function from its ashes; used by
both service-side method implementation and GLib bindings
internals.
(dbus_g_error_has_name, dbus_g_error_get_name): New function.
(_dbus_glib_test): Add some tests.
* test/glib/test-dbus-glib.c (main): Test dbus_g_error_has_name.
* test/glib/test-service-glib.c (my_object_throw_error): Use
dbus_g_error_set.
* glib/dbus-gobject.c (gerror_to_dbus_error_message): Handle
errors thrown by dbus_g_error_set.
* glib/dbus-gmain.c (dbus_g_bus_get): Change to dbus_g_error_set.
* glib/dbus-gparser.c (validate_signature): Ditto.
* glib/dbus-gproxy.c (dbus_g_proxy_new_for_name_owner)
(dbus_g_proxy_end_call_internal): Ditto.
* glib/Makefile.am: Generate dbus-glib-error-switch.h, which
converts DBUS_ERROR_x to DBUS_GERROR_x.
(libdbus_glib_1_la_SOURCES, BUILT_SOURCES, CLEANFILES): Add it.
* doc/TODO: Remove error TODO.
* doc/dbus-tutorial.xml: Update with documentation about error
handling.
* dbus/make-dbus-glib-error-enum.sh: Tighten up regexp to make
sure we only change DBUS_ERROR to DBUS_GERROR, not all ERROR to
GERROR. Also add DBUS_GERROR_REMOTE_EXCEPTION.
2005-06-22 Colin Walters <walters@verbum.org>
Patch from Ross Burton <ross@openedhand.com>
* glib/dbus-gobject.c (dbus_g_method_return): Free out_sig.
2005-06-20 Colin Walters <walters@verbum.org>
* configure.in: Add glib/examples.
* glib/Makefile.am: Add examples/
* glib/examples/.cvsignore
* glib/examples/Makefile.am
* glib/examples/example-client.c
* glib/examples/example-service.c
* glib/examples/example-service.xml
* glib/examples/example-signal-emitter.c
* glib/examples/example-signal-emitter.xml
* glib/examples/example-signal-recipient.c:
New files; GLib binding examples, ported from
python/examples.
2005-06-20 Colin Walters <walters@verbum.org>
* dbus/dbus-glib.h:
* glib/dbus-gproxy.c: Rename dbus_g_proxy_invoke to
dbus_g_proxy_call.
* glib/dbus-binding-tool-glib.c:
* doc/dbus-tutorial.xml:
* test/glib/test-dbus-glib.c: Update for rename.
2005-06-20 Colin Walters <walters@verbum.org>
Patch suggested by Ross Burton <ross@openedhand.com>
* glib/dbus-gobject.c (export_signals): Free signal name.
(g_value_init): Use G_VALUE_NOCOPY_CONTENTS to plug
memory leak. Add a bit of documentation.
(dbus_g_method_return_error): Free context, and note we do
so.
2005-06-18 Murray Cumming <murrayc@murrayc.com>
* dbus/dbus-glib.h:
* glib/dbus-gobject.c:
* glib/dbus-gproxy.c:
* glib/dbus-gvalue.c: Predeclare structs as
typedef struct _Something Something instead of
typedef struct Something Something, so we can
redeclare the prototypes. Other GNOME libraries
do this already.
2005-06-17 Colin Walters <walters@verbum.org>
* tools/dbus-names-model.c (have_names_notify): Fix call
to dbus_g_proxy_end_call.
2005-06-17 Colin Walters <walters@verbum.org>
* glib/dbus-gproxy.c (dbus_g_proxy_emit_remote_signal): Don't
spew warnings if we get malformed remote signals.
* glib/dbus-gobject.c (propsig_iterate): New function.
(lookup_object_info): New function, extracted from
lookup_object_and_method.
(introspect_properties, introspect_signals): Delete; these
are merged into write_interface.
(write_interface): Write out signals and properties here;
dump the org.gtk.object stuff and use the interface given
in the introspection data blob. Also fix up property XML.
(lookup_values): New function.
(introspect_interfaces): Gather a mapping from interface to a
list of its methods, signals, and properties, then write out
each interface.
(lookup_object_and_method): Use lookup_object_info.
(struct DBusGSignalClosure): Add interface.
(dbus_g_signal_closure_new): Add interface. Don't dup signame;
we can just use the constant data.
(dbus_g_signal_closure_finalize): Don't free signal name.
(signal_emitter_marshaller): Use interface from signal closure.
(export_signals): Only export signals mentioned in introspection
blob.
(dbus_g_connection_register_g_object): Warn if we have no
introspection data for an object.
(funcsig_equal): Remove unused variable.
(dbus_g_object_register_marshaller): Take varargs instead of
list.
(dbus_g_object_register_marshaller_array): New function,
extracted from old dbus_g_object_register_marshaller.
* glib/dbus-binding-tool-glib.c (struct DBusBindingToolCData): Add
signals and property data.
(write_quoted_string): New function, extracted from generate_glue.
(generate_glue): Write signals and properties to introspection
blob.
* dbus/dbus-glib.h (struct DBusGObjectInfo): Include
exported_signals and exported_properties.
(dbus_g_object_register_marshaller): Update prototype.
(dbus_g_object_register_marshaller_array): Prototype.
* test/glib/test-dbus-glib.c: Extend testing to cover new signals.
* test/glib/test-service-glib.c: Add new test signals and method
to emit them.
* test/glib/test-service-glib.xml: Add some test signals.
* test/glib/Makefile.am (BUILT_SOURCES): Add my-object-marshal.c
and my-object-marshal.h
(test_service_glib_SOURCES, test_dbus_glib_SOURCES): Add
my-object-marshal.c.
(my-object-marshal.c, my-object-marshal.h): Implement.
* test/glib/.cvsignore: Update.
* doc/TODO: Remove two GLib TODO items fixed by this
patch.
2005-06-16 Colin Walters <walters@verbum.org>
* doc/TODO: Update for GLib bindings.
2005-06-16 Colin Walters <walters@verbum.org>
* glib/dbus-binding-tool-glib.c:
* glib/dbus-gobject.c:
* glib/dbus-gproxy.c: Add Nokia copyright; Patch
from Ross Burton, for his GLib bindings work.
2005-06-16 Colin Walters <walters@verbum.org>
* glib/dbus-gobject.c (funcsig_hash, funcsig_equal): Use n_params
to iterate instead of walking to G_TYPE_INVALID.
Patch based on a patch from Ryan Gammon.
2005-06-16 Colin Walters <walters@verbum.org>
* bus/bus.c (bus_context_new): Set parser to NULL
after we unref it (Patch from Chris Boscolo, #2174).
2005-06-16 Colin Walters <walters@verbum.org>
* python/dbus_bindings.pyx.in: Import size_t,
__int64_t, __uint64_t, and __signed.
* dbus/dbus-sysdeps.c <HAVE_CMSGCRED> (write_credentials_byte):
Define cmsg struct, output it.
(_dbus_read_credentials_unix_socket):
Use cmsg struct.
Patch from Joe Markus Clarke for FreeBSD support.
2005-06-16 Colin Walters <walters@verbum.org>
* tools/dbus-send.c (append_array): Use strtok.
(append_dict): New function.
(type_from_name): New function, extracted from main.
(main): Handle sending dicts.
* tools/dbus-print-message.c (print_iter): Print dict
entries.
2005-06-16 Colin Walters <walters@verbum.org>
* glib/dbus-gvalue.c (marshal_basic): Marshal NULL string
values as the empty string (#2948).
2005-06-16 Colin Walters <walters@verbum.org>
* dbus/Makefile.am:
* mono/doc/Makefile.am:
* test/glib/Makefile.am:
Fix srcdir != builddir issues (Patch from Chris Wilson, #3477)
2005-06-16 Colin Walters <walters@verbum.org>
* dbus/dbus-marshal-header.c (_dbus_header_load): Set
header byte order from expected byte order (Patch from Chris Wilson, #3475).
* dbus/dbus-marshal-byteswap.c (byteswap_body_helper):
Increment pointer after swapping fixed array. Add assertion
for array length.
2005-06-15 Colin Walters <walters@verbum.org>
* dbus/dbus-sysdeps.c <HAVE_CMSGCRED> (_dbus_read_credentials_unix_socket):
Fix call to dbus_set_error. (Patch from Michael Banck, #3461)
2005-06-15 John (J5) Palmieri <johnp@redhat.com>
* NEWS: Update to 0.34
2005-06-15 David Zeuthen <davidz@redhat.com>
* configure.in (LT_CURRENT): Revert back to 1 as the library
hasn't changed and we've certainly not committed to protocol
stability yet. All this does is to break ABI. See commit note
from hp@redhat.com 2005-05-05 for details.
2005-06-15 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-connection.c (_dbus_connection_peer_filter): New method
(_dbus_connection_run_builtin_filters): New method
(dbus_connection_dispatch): Run the builtin filters which in turn
runs the peer filter which handles Ping messages.
* doc/TODO:
- Ping isn't handled: This patch fixes it
- Add a test case for the Ping message: added TODO item
2005-06-15 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-message.c:
(dbus_message_has_path): New method
(dbus_message_has_interface): New method
(dbus_message_has_member): New method
* dbus/dbus/dbus-sysdeps.c (_dbus_check_dir_is_private_to_user):
New method
* dbus/dbus-keyring.c (_dbus_keyring_reload): Check to see that
the keyring directory is private to the user
* doc/TODO:
- The convenience functions in dbus-bus.h should perhaps have
the signatures that they would have if they were autogenerated
stubs. e.g. the acquire service function. We should also evaluate
which of these functions to include, in light of the fact that
GLib/Qt native stubs will probably also exist.: Punted
- add dbus_message_has_path(), maybe has_member/interface:
fixed in this patch
- in dbus-keyring.c, enforce that the keyring dir is not
world readable/writable: Fixed in this patch
2005-06-15 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-marshal-validate.h: Added a new validation
error code DBUS_VALIDITY_UNKNOWN_OOM_ERROR = -4 for
out of memory errors when validating signitures
* dbus/dbus-marshal-header.c: use DBUS_VALIDITY_UNKNOWN_OOM_ERROR
in places where we previously used DBUS_VALID and a FALSE return
value to indicate OOM
* dbus/dbus-marshal-validate.c (_dbus_validate_signature_with_reason):
Use a stack to track the number of elements inside containers. The
stack values are then used to validate that dict entries have only two
elements within them.
(validate_body_helper): check the reason for failure when validating
varients
* dbus/dbus-message.c (load_message): use
DBUS_VALIDITY_UNKNOWN_OOM_ERROR in places where we previously used
DBUS_VALID and a FALSE return value to indicate OOM
* doc/TODO: remove "- validate dict entry number of fields" as this
patch fixes it
2005-06-14 David Zeuthen <davidz@redhat.com>
* bus/bus.c (process_config_every_time): Drop existing conf-dir
watches (if applicable) and add new watches
* bus/main.c (signal_handler): Handle SIGIO if using D_NOTIFY
(main): Setup SIGIO signal handler if using D_NOTIFY
* bus/config-parser.h: Add prototype bus_config_parser_get_conf_dirs
* bus/config-parser.c (struct BusConfigParser): Add conf_dirs list
(merge_included): Also merge conf_dirs list
(bus_config_parser_unref): Clear conf_dirs list
(include_dir): Add directory to conf_dirs list
(bus_config_parser_get_conf_dirs): New function
* bus/dir-watch.[ch]: New files
* bus/Makefile.am (BUS_SOURCES): Add dir-watch.[ch]
* configure.in: Add checks for D_NOTIFY on Linux
2005-06-14 Colin Walters <walters@verbum.org>
* glib/dbus-binding-tool-glib.c:
* glib/dbus-gobject.c:
* glib/dbus-gvalue.c: Fix indentation and brace style.
2005-06-14 Ross Burton <ross@openedhand.com>.
* glib/dbus-glib.h: Make DBusGMethodInvocation
a private structure. Rearrange prototypes a bit.
* glib/dbus-gproxy.c (dbus_g_proxy_invoke): Add
documentation for first_arg_type.
* glib/dbus-gobject.c: Move DBusGMethodInvocation
here, add documentation. Move dbus_g_method_return
and dbus_g_method_return_error into public API
section.
2005-06-14 Colin Walters <walters@verbum.org>
* glib/dbus-gobject.c (_dbus_gobject_lookup_marshaller):
Add missing return statements, noticed by Ross Burton.
2005-06-13 Ross Burton <ross@openedhand.com>.
* glib/dbus-gobject.c: Handle errors on message
demarshalling by sending error message back.
* glib/dbus-gvalue.c: Initialize return variables.
2005-06-13 Colin Walters <walters@verbum.org>
* glib/Makefile.am: Fix thinko in last patch.
2005-06-13 Colin Walters <walters@verbum.org>
* glib/Makefile.am: Move dbus-gtype-specialized.c
and dbus-gtype-specialized.h into a _HEADERS variable,
install them.
2005-06-12 Colin Walters <walters@verbum.org>
Async signals and various bugfixes and testing by
Ross Burton <ross@openedhand.com>.
* glib/dbus-gvalue.h: (struct DBusBasicGValue): Delete.
(dbus_gvalue_genmarshal_name_from_type)
(dbus_gvalue_ctype_from_type): Moved to dbus-binding-tool-glib.c.
(dbus_gtype_to_dbus_type): Renamed to dbus_gtype_from_signature.
(dbus_g_value_types_init, dbus_gtype_from_signature)
(dbus_gtype_from_signature_iter, dbus_gtype_to_signature)
(dbus_gtypes_from_arg_signature): New function prototypes.
(dbus_gvalue_demarshal): Take context and error arguments.
(dbus_gvalue_demarshal_variant): New function.
(dbus_gvalue_demarshal_message): New function.
(dbus_gvalue_store): Delete.
* glib/dbus-gvalue.c:
File has been almost entirely rewritten; now we special-case
more types such as DBUS_TYPE_SIGNATURE, handle arrays and
hash tables correctly, etc. Full support for recursive values
is not yet complete.
* glib/dbus-gproxy.c (dbus_g_proxy_class_init): Change last
argument of signal to G_TYPE_POINTER since we now pass a
structure.
(lookup_g_marshaller): Delete in favor of
_dbus_gobject_lookup_marshaller.
(marshal_dbus_message_to_g_marshaller): Use
_dbus_gobject_lookup_marshaller and dbus_gvalue_demarshal_message
to handle remote signal callbacks.
(dbus_g_proxy_new_from_proxy): New function; creates a new
DBusGProxy by copying an existing one.
(dbus_g_proxy_get_interface, dbus_g_proxy_set_interface)
(dbus_g_proxy_get_path): New functions.
(dbus_g_proxy_marshal_args_to_message): New function;
factored out of existing code.
(DBUS_G_VALUE_ARRAY_COLLECT_ALL): Collect all arguments
from a varargs array.
(dbus_g_proxy_begin_call_internal): New function.
(dbus_g_proxy_end_call_internal): New function.
(dbus_g_proxy_begin_call): Take GTypes instead of DBus types
as arguments; simply invoke dbus_g_proxy_begin_call_internal
after collecting args into value array.
(dbus_g_proxy_end_call): Take GTypes instead of DBus types;
invoke dbus_g_proxy_end_call_internal.
(dbus_g_proxy_invoke): Simply invoke begin_call_interanl and
end_call_internal.
(dbus_g_proxy_call_no_reply): Take GTypes instead of DBus
types.
(array_free_all): New function.
(dbus_g_proxy_add_signal): Take GTypes.
* glib/dbus-gobject.h:
(_dbus_glib_marshal_dbus_message_to_gvalue_array): Delete.
(_dbus_gobject_get_path, _dbus_gobject_lookup_marshaller):
Prototype.
* glib/dbus-gobject.c: Add a global marshal_table hash which
stores mappings from type signatures to marshallers. Change lots
of invocations of dbus_gtype_to_dbus_type to
dbus_gtype_to_signature.
(_dbus_glib_marshal_dbus_message_to_gvalue_array): Delete.
(introspect_signals): Fix test for query.return_type.
(set_object_property): Update invocation of dbus_gvalue_demarshal.
(invoke_object_method): Many changes. Handle asynchronous
invocations. Convert arguments with
dbus_gvalue_demarshal_message. Handle errors. Use
DBusSignatureIter instead of strlen on args. Handle all arguments
generically. Special-case variants.
(dbus_g_method_return, dbus_g_method_return_error): New function.
(DBusGSignalClosure): New structure, closes over signal
information.
(dbus_g_signal_closure_new): New function.
(dbus_g_signal_closure_finalize): New function.
(signal_emitter_marshaller): New function; is special marshaller
which emits signals on bus.
(export_signals): New function; introspects object signals and
connects to them.
(dbus_g_object_type_install_info): Take GType instead of
GObjectClass.
(dbus_g_connection_register_g_object): Invoke export_signals.
(dbus_g_connection_lookup_g_object): New function.
(DBusGFuncSignature) New structure; used for mapping type
signatures to marshallers.
(funcsig_hash): New function; hashes DBusGFuncSignature.
(funcsig_equal): New function; compares DBusGFuncSignature.
(_dbus_gobject_lookup_marshaller): New function.
(dbus_g_object_register_marshaller): New function; used to
register a marshaller at runtime for a particular signature.
* glib/dbus-gmain.c (_dbus_gmain_test): Add various tests.
* glib/dbus-binding-tool-glib.h: Add DBUS_GLIB_ANNOTATION_ASYNC
which notes a server method implementation should be
asynchronous.
* glib/dbus-binding-tool-glib.c
(dbus_binding_tool_output_glib_server): Call
dbus_g_value_types_init.
(write_formal_parameters): Use dbus_gtype_from_signature. Handle
variants specially.
(dbus_g_type_get_lookup_function): Turn GType into an invocation
of a lookup function.
(write_args_for_direction): Use dbus_g_type_get_lookup_function.
(write_untyped_out_args): New method; write output arguments.
(write_formal_declarations_for_direction): Function for
writing prototypes.
(write_formal_parameters_for_direction): Function for
writing implementations.
(write_typed_args_for_direction): Function for writing
arguments prefixed with GTypes.
(write_async_method_client): Write out async version
of method.
* glib/dbus-binding-tool-glib.c: Include dbus-gvalue-utils.h.
(dbus_g_type_get_marshal_name): Move mapping from GType
to marshal name into here.
(dbus_g_type_get_c_name): Move into here.
(compute_marshaller): Convert signature to type with
dbus_gtype_from_signature, use dbus_g_type_get_marshal_name.
(compute_marshaller_name): Ditto.
(compute_marshaller): Handle async signal annotations.
(gather_marshallers): Return if we don't have a known
prefix.
(generate_glue): Collect introspection blob here, and
write all of the blob at the end. This allows an object
with multiple interfaces to work.
Mark async methods in introspection blob.
* glib/Makefile.am (libdbus_glib_1_la_SOURCES): Add
dbus-gtype-specialized.c, dbus-gtype-specialized.h,
dbus-gvalue-utils.h, dbus-gvalue-utils.c.
* dbus/dbus-glib.h: Don't include dbus-protocol.h; this
avoids people accidentally using DBUS_TYPE_* which should
not be necessary anymore.
Do include dbus-gtype-specialized.h, which are utilities
for GLib container types.
Add various #defines for types such as
DBUS_TYPE_G_BOOLEAN_ARRAY.
(DBusGValueIterator, DBusGValue): Define, not fully used
yet.
(dbus_g_value_get_g_type): Type for recursive value.
(dbus_g_value_open, dbus_g_value_iterator_get_value)
(dbus_g_value_iterator_get_values, dbus_g_value_iterator_recurse)
(dbus_g_value_free): Prototypes.
(dbus_g_object_register_marshaller, dbus_g_proxy_new_from_proxy): Prototype.
(dbus_g_proxy_set_interface): Prototype.
(dbus_g_proxy_begin_call, dbus_g_proxy_end_call)
(dbus_g_proxy_call_no_reply): Take GLib types instead of DBus
types.
(dbus_g_proxy_get_path, dbus_g_proxy_get_interface):
Accessors.
(DBusGAsyncData, DBusGMethodInvocation): Structures for
doing async invocations.
(dbus_g_method_return, dbus_g_method_return_error):
Prototypes.
* doc/dbus-tutorial.xml: Update GLib section.
* tools/dbus-viewer.c (load_child_nodes): Update
for new invocation type of dbus_g_proxy_end_call.
(load_from_service_thread_func): Ditto.
* tools/print-introspect.c (main): Ditto.
* tools/dbus-names-model.c (have_names_notify)
(names_model_reload, names_model_set_connection)
Use GTypes.
* python/Makefile.am (INCLUDES): Define DBUS_COMPILATION,
needed since Python bindings use GLib bindings.
* test/glib/Makefile.am (INCLUDES): Define DBUS_COMPILATION.
Add --prefix argument.
* tools/Makefile.am: Define DBUS_COMPILATION. Remove
unneeded --ignore-unsupported arg.
* test/glib/test-service-glib.c:
* test/glib/test-service-glib.xml:
* test/glib/test-dbus-glib.c: Add many more tests.
2005-06-06 David Zeuthen <davidz@redhat.com>
* doc/TODO: Add item about need to remove deprecated functions.
* dbus/dbus-connection.h: Add prototype for dbus_connection_disconnect
* dbus/dbus-connection.c (dbus_connection_disconnect): New function
to repair the ABI which was broken with the last commit.
2005-06-02 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-connection.c, dbus/dbus-connection.h
(dbus_connection_disconnect): renamed to dbus_connection_close
for API symmetry with dbus_connection_open
(_dbus_connection_open_internal):
s/dbus_connection_disconnect/dbus_connection_close
* dbus/dbus-bus.c (dbus_bus_get):
s/dbus_connection_disconnect/dbus_connection_close
* bus/connection.c (bus_connections_unref,
bus_connections_setup_connection, bus_connections_expire_incomplete):
s/dbus_connection_disconnect/dbus_connection_close
* bus/dispatch.c (bus_dispatch, kill_client_connection,
kill_client_connection_unchecked, check_hello_connection):
s/dbus_connection_disconnect/dbus_connection_close
* bus/bus.c (new_connection_callback):
s/dbus_connection_disconnect/dbus_connection_close
* tools/dbus-send.c (main):
s/dbus_connection_disconnect/dbus_connection_close
* test/glib/test-profile.c (no_bus_thread_func, with_bus_thread_func):
s/dbus_connection_disconnect/dbus_connection_close
* test/test-service.c (path_message_func, filter_func):
s/dbus_connection_disconnect/dbus_connection_close
* doc/TODO: remove connection_open/connection_disconnect lacks symmetry item that was just fixed
2005-05-25 Colin Walters <walters@verbum.org>
* dbus/dbus-protocol.h: Move various bus service #defines such
as DBUS_SERVICE_DBUS and DBUS_NAME_FLAG_PROHIBIT_REPLACEMENT to
dbus/dbus-shared.h.
* dbus/dbus-shared.h: Various defines moved here.
* dbus/dbus-marshal-header.c: Include dbus-shared.h.
2005-05-25 John (J5) Palmieri <johnp@redhat.com>
* python/__init__.py: Python bindings deserve a minor version
update. Upped to (0, 40, 2)
2005-05-24 John (J5) Palmieri <johnp@redhat.com>
* python/decorators.py: add explicitly_pass_message decorator
for passing in the dbus message as keyword for edge case signal
handling
* python/matchrules.py (SignalMatchRule.__repr__): fix output
to conform with what dbus expects for match rules
(SignalMatchRule.execute): add the dbus message as a keyword
if the signal handler has requested it
* python/examples/example/signal-recipient.py: added some more
examples on how to hook up to signals
2005-05-23 John (J5) Palmieri <johnp@redhat.com>
* python/decorators.py: import dbus_bindings
* python/matchrules.py (SignalMatchRule, SignalMatchTree,
SignalMatchNode): new classes that implement wildcard signal
callback matching using a tree lookup. Heavily modified from a
patch sent by Celso Pinto (fd.o bug #3241)
* _dbus.py (add_signal_receiver, remove_signal_receiver, _signal_func):
use new match classes to handle signals.
2005-05-19 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx.in: s/TYPE_PATH/TYPE_OBJECT_PATH
2005-05-18 Havoc Pennington <hp@redhat.com>
* configure.in: use GLIB_GNU_GETTEXT to get INTLLIBS and require
gettext. Not really worth requiring yet perhaps, but any
production quality 1.0 would require it so we should go ahead and
get things set up. We do have a couple token calls to
bindtextdomain in the code already.
2005-05-16 John (J5) Palmieri <johnp@redhat.com>
* glib/dbus-gmain.c (io_handler_dispatch): fix deadlock
when using recursive g_main_loops
* python/_dbus.py (class Bus): add the ProxyObjectClass
alias for ProxyObject to make it easier for the Twisted
networking framework to integrate dbus.
* python/proxies.py (class ProxyObject): add the ProxyMethodClass
alias for ProxyMethod to make it easier for the Twisted
networking framework to integrate dbus.
2005-05-11 Ross Burton <ross@openedhand.com>
* glib/dbus-glib-tool.c: Add --prefix argument.
* glib/dbus-binding-tool-glib.h: Add prefix argument.
* glib/dbus-binding-tool-glib.c (compute_marshaller_name):
Add prefix argument.
(generate_glue): Pass prefix argument down.
(dbus_binding_tool_output_glib_server): Pass prefix to
glib-genmarshal.
2005-05-11 Colin Walters <walters@verbum.org>
* tools/dbus-send.c (append_array): New function.
(append_arg): Broken out from main.
(main): Add cheesy hack to send arrays and variants.
(usage): Update.
* tools/dbus-print-message.c (print_iter): Broken out
from main.
2005-05-11 Colin Walters <walters@verbum.org>
* dbus/dbus-signature.c (dbus_signature_iter_get_signature):
New function, returns signature string for signature iter.
* dbus/dbus-signature.h: Prototype it.
* dbus/dbus-message.c (dbus_message_iter_get_signature):
New function, returns signature string for message iter.
(dbus_message_iter_get_array_len): New function, returns
length of array.
(dbus_message_iter_get_fixed_array): Fix assertion; this
function should be used when the iter is pointing to the
contents of an array
* dbus/dbus-message.h: Prototypes.
* dbus/dbus-marshal-recursive.c (_dbus_type_reader_get_array_length):
New function; returns length of an array.
* dbus/dbus-marshal-recursive.h: Prototype it.
2005-05-11 Colin Walters <walters@verbum.org>
* dbus/dbus-sysdeps-util.c <!HAVE_POSIX_GETPWNAM_R>: Fix
compilation error.
2005-05-08 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps-util.c (_dbus_become_daemon): write the
daemon's pid, not the parent's pid, to the file descriptor.
Reported by Taj Morton.
2005-05-05 Havoc Pennington <hp@redhat.com>
* configure.in (LT_*): add notes on how the libtool versioning
works to save thinking. Increment soname to indicate protocol
breakage (though really the library interface hasn't changed I
guess)
* dbus/dbus-transport.c (_dbus_transport_get_is_authenticated):
verify the GUID received from server matches what we were
expecting, if we had an expectation
* dbus/dbus-auth.c (send_ok): send GUID along with the OK command
(_dbus_auth_get_guid_from_server): new function
(send_begin): parse the OK args
* doc/dbus-specification.xml: add GUID to the auth protocol
2005-05-05 John (J5) Palmieri <johnp@redhat.com>
* Fix my name in previous changelog ;)
* python/proxies.py (ProxyObject.__getattr__): add further patch
from Anthony Baxter to throw an AttributeError when python
__special__ functions are called instead of marshling them over
the bus (Bug#1685 comment 3).
2005-05-04 John (J5) Palmieri <johnp@redhat.com>
* python/Makefile.am: changed to use pyexecdir for the binding
shared libraries (Bug#2494)
* python/exceptions.py: bring exceptions over from the bindings
so they can be used in applications (Bug#2036)
Make all exceptions derive from DBusException
* python/_dbus.py, python/proxies.py: implement __repr__ in a couple
of classes so that print obj doesn't throw an exception (Bug #1685)
2005-05-03 Ross Burton <ross@openedhand.com>
* glib/dbus-gobject.c (dbus_g_connection_register_g_object):
Return if we get an error during registration. Set up a
weak reference on object to unregister if object is destroyed.
(unregister_gobject): New function.
2005-05-01 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx.in:
- added new type classes for hinting to the marashaler what type
to send over the wire
- added int16 and uint16 marshalers
- Fixed a bug in the type constants that caused int32 to go out
as uint16 over the wire
* python/dbus.py: split up into different files and renamed _dbus.py
* python/__init__.py, python/_util.py, python/decorators.py,
python/exceptions.py, python/proxies.py, python/services.py,
python/types.py: new files split off from dbus.py
* python/Makefile.am: Add new files, remove dbus.py and
install all python files to <python module dir>/dbus
* python/examples/*: Added #!/usr/bin/env python to the top of
every example. Patch provided by Tatavarty Kalyan
2005-04-25 John (J5) Palmieri <johnp@redhat.com>
* NEWS: Update to 0.33
2005-04-25 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx.in (send_with_reply_handlers): New send
method for doing async calls
(_pending_call_notification): New C function for handling pendning call
callbacks
(set_notify): New method for setting pending call notification
* python/dbus.py: new version tuple "version" is set at (0, 40, 0)
Async capabilities added to remote method calls
(Sender): class removed
(RemoteService): class removed
(ObjectTree): class removed for now
(RemoteObject): Renamed to ProxyObject
(RemoteMethod): Renamed to ProxyMethod
(method): Decorator added for decorating python methods as dbus methods
(signal): Decorator added for decorating python methods as signal emitters
(ObjectType): Metaclass added for generating introspection data and the
method callback vtable
(Interface): Wrapper class added to wrap objects in a dbus interface
(Object): Uses ObjectType as its metaclass and exports Introspect
of the org.freedesktop.DBus.Introspectable interface
(ValidationException, UnknownMethodException): new exceptions
* python/examples/*: Modified to fit with the new bindings
2005-04-23 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.c (dbus_message_append_args): fix doc comment,
reported by Tony Houghton
* test/test-service.c (main): test
dbus_connection_get_object_path_data()
* dbus/dbus-object-tree.c (find_handler): be sure we always init
the exact_match
(_dbus_object_tree_get_user_data_unlocked): new function used by
dbus_connection_get_object_path_data()
(do_register): add assertion test for get_user_data_unlocked
(object_tree_test_iteration): more tests
* dbus/dbus-connection.c (dbus_connection_get_object_path_data):
new function from Dan Reed to let you get the user data from
dbus_connection_register_object_path()
2005-04-23 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-marshal-recursive-util.c: Fixed buffer overflow
in numerous places that did not account for the NULL terminator
(signature_from_seed): changed the manual string copy loop to
just use strcpy instead
make check should now pass
2005-04-19 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-marshal-header.c (_dbus_header_create): Fix assert
so that it allows messages that are not signals to pass in
NULL as the interface.
2005-04-18 David Zeuthen <davidz@redhat.com>
* glib/dbus-gmain.c (io_handler_destroy_source):
(timeout_handler_destroy_source, connection_setup_free):
Also unref the source to avoid memory leaks.
2005-04-13 David Zeuthen <davidz@redhat.com>
* bus/config-parser.c (bus_config_parser_new): Bump this to a
more reasonable, yet still totally arbitrary, value :-).
2005-04-13 David Zeuthen <davidz@redhat.com>
* doc/TODO: Added an "important for 1.0" item about selinux
allow/deny messages
2005-04-13 David Zeuthen <davidz@redhat.com>
* bus/selinux.c: Add c-file-style to top of file
(log_audit_callback): Don't free the data here anymore
(bus_selinux_check): Don't take spid and tpid since appending
that to auxdata may OOM.
(bus_selinux_allows_acquire_service): Handle OOM and signal back
to the caller if we are OOM by taking an error object.
(bus_selinux_allows_send): -do-
* bus/selinux.h: Fix prototypes for bus_selinux_allows_acquire_service
and bus_selinux_allows_send
* bus/bus.c (bus_context_check_security_policy): Pass error and
pass on OOM thrown by bus_selinux_allows_send()
* bus/services.c (bus_registry_acquire_service): Pass error and
pass on OOM thrown by bus_selinux_allows_acquire_service()
2005-04-13 Havoc Pennington <hp@redhat.com>
* glib/dbus-gmain.c (message_queue_dispatch): only dispatch one
message at a time to avoid monopolizing the main loop, bug
#2953 from Benjamin Otte
2005-04-09 Havoc Pennington <hp@redhat.com>
* dbus/dbus-string.c (copy): change a memcpy to memmove due to
possible overlap, fix from Daniel Reed
(fixup_alignment): fix signedness warnings
(_dbus_string_append_unichar): ditto
2005-04-09 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message-util.c (_dbus_message_test): fix signedness warning
* glib/dbus-glib-tool.c (main): fix warning
* glib/dbus-binding-tool-glib.c (generate_glue): fix warning
* dbus/dbus-connection.c (dbus_connection_read_write_dispatch):
add a new function that can be used in simple applications that
don't have a main loop and are willing to block
2005-04-05 David Zeuthen <davidz@redhat.com>
Fix https://bugs.freedesktop.org/show_bug.cgi?id=2889
* glib/dbus-gmain.c:
(io_handler_destroy_source): Remove from list of IO handlers
of the ConnectionSetup object
(timeout_handler_destroy_source): -do- for timeout handlers
(io_handler_source_finalized): Don't remove from list since
we now do that in io_handler_destroy_source(). Renamed from
io_handler_source_destroyed
(timeout_handler_source_destroyed): -do- for timeout handlers
(connection_setup_free): It is now safe to iterate over all
IO and timeout handlers as the _destroy_source removes them
from the list synchronously
2005-03-30 Havoc Pennington <hp@redhat.com>
* configure.in: change check to gtk 2.4
* tools/dbus-viewer.c (name_combo_changed_callback): remove
gtk_combo_box_get_active_text() usage to decrement GTK requirement
to 2.4
2005-03-29 John (J5) Palmieri <johnp@redhat.com>
* News: Update 0.32
* HACKING: Fixed realease instructions. configure.in should be updated to
the next release by the person who made the last release.
2005-03-29 John (J5) Palmieri <johnp@redhat.com>
* python/lvalue_cast_post_process.py - removed. Patch has been
submitted to Pyrex maintainers that fixes gcc4.0 errors
* python/Makefile.am: removed refrences to lvalue_cast_post_process.py
2005-03-24 Daniel Reed <n@ml.org>
* tools/Makefile.am: Make print-introspect and
dbus-bus-introspect.xml building conditional on HAVE_GLIB.
2005-03-22 John (J5) Palmieri <johnp@redhat.com>
* tools/Makefile.am: Patch by Colin Walters that fixes distcheck
* dbus/dbus-userdb.c, dbus/dbus-userdb-util.c: Add patch we have
had in Red Hat packages for a while but for some reason never
got merged upstream
(_dbus_is_a_number): New checks if a string
can be converted to a number and does the conversion if it can
(_dbus_user_database_lookup): Add check to see if the given username
is a udi. This allows udi's to be used instead of usernames in the
config file.
(_dbus_user_database_lookup_group): Add check to see if the given groupname
is a gdi. This allows gdi's to be used instead of groupnames in the
config file.
2005-03-21 John (J5) Palmieri <johnp@redhat.com>
* python/lvalue_cast_post_process.py - added post processor to fix Pyrex
code so that it compiles with gcc4.0
* python/Makefile.am: Added lvalue_cast_post_process.py to EXTRA_DIST
run dbus_bindings.c through lvalue_cast_post_process.py and copy the
results back to dbus_binding.c
2005-03-20 Colin Walters <walters@verbum.org>
Patch suggested by Inguva Rajasekhar <ringuva@novell.com>.
* configure.in: Require GTK+ 2.6.
2005-03-20 Colin Walters <walters@verbum.org>
* Makefile.am (SUBDIRS, DIST_SUBDIRS): Build tools before test.
2005-03-17 Tom Parker <palfrey@tevp.net>
* dbus/dbus-userdb.c (_dbus_user_database_lookup): Don't
print DBUS_UID_UNSET; instead print passed username. Also
be sure to actually use gid looked up in cache.
* dbus/dbus-userdb-util.c (_dbus_user_database_lookup_group): Ditto
for DBUS_GID_UNSET and groupname.
2005-03-17 Colin Walters <walters@verbum.org>
* bus/print-introspect.c: Move to tools/.
* bus/run-with-tmp-session-bus.sh: Ditto.
* glib/Makefile.am (dbus-glib-bindings.h): Move
generation to tools/Makefile.am.
* test/glib/run-test.sh: Update to handle move
of run-with-tmp-session-bus.sh.
* test/glib/test-service-glib.c: Update to handle
move of dbus-glib-bindings.h.
* tools/print-introspect.c: Moved here
from bus/, and ported to GLib bindings.
* tools/run-with-tmp-session-bus.sh: Moved here
from bus/.
* tools/Makefile.am: Generate dbus-glib-bindings.h
and dbus-bus-introspect.xml here.
* tools/.cvsignore, glib/.cvsignore, bus/.cvsignore:
Update.
2005-03-17 Colin Walters <walters@verbum.org>
* bus/driver.c (write_args_for_direction): Use
_dbus_string_get_const_data to retrieve string;
_dbus_string_get_const_data_len doesn't actually return
a NULL-terminated substring.
* test/glib/test-service-glib.c: Include dbus-glib-bindings.h.
(main): Change to use org_freedesktop_DBus_request_name
instead of using g_proxy_begin_call/end_call.
2005-03-15 Joe Shaw <joeshaw@novell.com>
* mono/ProxyBuilder.cs (BuildFinalizer): Fix some invalid IL when
generating the finalizer. Fixes from Ben Maurer.
2005-03-12 Joe Shaw <joeshaw@novell.com>
* mono/BusDriver.cs: Update method names: ListServices
becomes ListNames; GetOwner becomes GetNameOwner.
* mono/ProxyBuilder.cs (BuildFinalizer): Need to load arg 0
onto the eval stack when removing the delegate.
2005-03-12 Joe Shaw <joeshaw@novell.com>
* mono/dbus-sharp.dll.config.in: Don't hardcode 0 for
LT_CURRENT. Set it to the autoconf variable.
* mono/ProxyBuilder.cs: Add a finalizer to the generated proxy
classes that disconnects the signal handler delegate from the
service object. Fixes a big leak of proxy objects on the
client side of things. Patch from Ben Maurer
<bmaurer@ximian.com>
2005-03-12 Colin Walters <walters@verbum.org>
* bus/driver.c (write_args_for_direction): New function,
parses a type signature into arguments and outputs to
XML.
(bus_driver_handle_introspect): Use it instead of
hardcoding XML for certain signatures.
* bus/Makefile.am (dbus-bus-introspect.xml): Add
dependency on dbus-daemon.
* glib/dbus-glib-tool.c (main): Parse ignore_unsupported
argument, pass it to dbus_binding_tool_output_glib_client.
* glib/dbus-binding-tool-glib.c
(generate_client_glue): Protect against multiple inclusion.
(dbus_binding_tool_output_glib_client): Add
G_BEGIN_DECLS/G_END_DECLS.
* glib/dbus-binding-tool-glib.c (compute_client_method_name):
Change to just take iface prefix directly.
(write_formal_parameters): Clarify error message.
(check_supported_parameters): New function; checks to see type
signatures of method parameters are supported.
(generate_client_glue): Handle ignore_unsupported flag.
(dbus_binding_tool_output_glib_client): Handle ignore_unsupported
parameter.
* glib/Makefile.am (dbus-glib-bindings.h): Pass
--ignore-unsupported by default until glib bindings
support arrays.
2005-03-11 Colin Walters <walters@verbum.org>
* glib/Makefile.am: Generate dbus-glib-bindings.h and
install it.
* bus/print-introspect.c: New file; prints introspection
data for a given name and object path.
* bus/run-with-tmp-session-bus.sh: New file, refactored
from test/glib/run-test.sh. Creates a temporary session
bus and runs another program.
* test/glib/run-test.sh: Refactor to invoke
run-with-tmp-session-bus.sh.
* bus/driver.c (bus_driver_handle_introspect): Fix to print new
introspection format. Also change to use DBUS_TYPE_x_AS_STRING
macros instead of hardcoding.
* glib/.cvsignore, bus/.cvsignore, test/glib/.cvsignore: Update.
2005-03-11 Joe Shaw <joeshaw@novell.com>
* dbus/dbus-connection.c (dbus_connection_send_with_reply): Remove
this unref; it doesn't match up evenly in some codepaths.
(_dbus_connection_block_pending_call): Unref at every exitpoint;
this evenly matches with the ref near the top of this function.
2005-03-09 Joe Shaw <joeshaw@novell.com>
* dbus/dbus-object-tree.c
(_dbus_object_tree_unregister_and_unlock): If checks are enabled
and we try to unregister a path that's not registered, still go
through the process of unlocking and don't just return.
2005-03-09 Colin Walters <walters@verbum.org>
* glib/dbus-gproxy.c (dbus_g_proxy_invoke): New method; calls
to this are generated for client-side wrappers. Invokes a
D-BUS method and returns reply values.
* glib/dbus-binding-tool-glib.c (write_args_sig_for_direction): New
function; writes signature string for argument direction.
(write_args_for_direction): Change to pass input values directly
instead of via address, and fix indentation.
(generate_client_glue): Change to invoke dbus_g_proxy_invoke. Also
make generated wrappers inlineable.
* dbus/dbus-message.c (dbus_message_iter_get_fixed_array): Add
note about using dbus_type_is_fixed.
* dbus/dbus-marshal-basic.c (_dbus_type_is_fixed): Moved to
dbus/dbus-signature.c as dbus_type_is_fixed.
All callers updated.
* dbus/dbus-signature.c (dbus_type_is_fixed): Moved here
from dbus/dbus-marshal-basic.c:_dbus_type_is_fixed.
* dbus/dbus-signature.h: Prototype.
* glib/dbus-binding-tool-glib.c (compute_marshaller_name): Fix
error printf code.
* test/glib/test-dbus-glib.c (main): Be sure to clear error as
appropriate instead of just freeing it.
(main): Free returned strings using g_free.
* test/glib/Makefile.am (test-service-glib-glue.h)
(test-service-glib-bindings.h): Add dependency on dbus-binding-tool.
* glib/dbus-gvalue.c (MAP_BASIC): Refactored from MAP_BASIC_INIT;
simply maps a simple D-BUS type to GType.
(dbus_dbus_type_to_gtype): Function which maps D-BUS type to
GType.
(dbus_gvalue_init): Just invoke dbus_dbus_type_to_gtype and
initialize the value with it.
(dbus_gvalue_binding_type_from_type): Unused, delete.
(dbus_gvalue_demarshal): Switch to hardcoding demarshalling for
various types instead of unmarshalling to value data directly.
Remove can_convert boolean.
(dbus_gvalue_marshal): Remove duplicate initialization; switch to
returning directly instead of using can_convert boolean.
(dbus_gvalue_store): New function; not related to D-BUS per-se.
Stores a GValue in a pointer to a value of its corresponding C
type.
* glib/dbus-gvalue.h: Remove dbus_gvalue_binding_type_from_type,
add dbus_gvalue_store.
2005-03-08 Joe Shaw <joeshaw@novell.com>
Fix a bunch of lifecycle and memory management problems
in the mono bindings.
* mono/Arguments.cs (Arguments): Implement IDisposable
* mono/Bus.cs (Bus): Don't allow public instantiation. This is
strictly a static class.
* mono/Connection.cs: Move the DBusObjectPathVTable and associated
delegates into this file.
(Connection): Implement IDisposable.
(Dispose): Disconnect the connection and set the raw connection
pointer to IntPtr.Zero.
(~Connection): Call Dispose().
(RegisterObjectPath): Added. Manages the registration of object
paths so we can cleanly disconnect them at dispose/finalize time.
(UnregisterObjectPath): Ditto.
(set_RawConnection): Unregister all of the object paths when
changing the underlying DBusConnection. Add them back onto the
new connection, if any.
* mono/Handler.cs: Don't implement IDisposable; it doesn't use any
more unmanaged resources anymore, so it's not necessary. Move all
the DBusObjectPathVTable stuff out of here.
(Handler): Save references to our delegates so that they don't get
finalized. Call Connection.RegisterObjectPath() instead of
dbus_connection_register_object_path() directly.
(Message_Called): Dispose the message after we're finished with
it.
* mono/Message.cs (Message): Implement IDisposable.
(Dispose): Dispose the Arguments, and set the RawMessage to
IntPtr.Zero.
(SendWithReplyAndBlock): We own the ref to the reply that comes
back from dbus_connection_send_with_reply_and_block() so add a
comment about that and unref it after we've constructed a managed
MethodReturn class around it. Fixes a big, big leak.
* mono/ProxyBuilder.cs: Reflect into Message to get the Dispose
method.
(BuildSignalHandler): After we've sent the Signal message, dispose
of it.
(BuildMethod): Dispose of the method call and reply messages after
we've sent the message and extracted the data we want from the
reply.
* mono/Service.cs (UnregisterObject): Don't call handler.Dispose()
anymore.
(Service_FilterCalled): Dispose of the message after we're
finished with it.
2005-03-08 Joe Shaw <joeshaw@novell.com>
* dbus/dbus-connection.c (dbus_connection_send_with_reply):
After we attach our pending call to the connection, unref
it. Fixes a leak.
* mono/Connection.cs (set_RawConnection): Disconnect our
filter and match callbacks from the old connection and
reconnect them to the new connection, if any.
* mono/DBusType/Array.cs: "Code" is a static member, so
don't use "this" to refer to it. Fix for stricter checking
in Mono 1.1.4.
* mono/DBusType/ObjectPath.cs (Append): Don't leak the
object path that we pass into unmanaged code.
* mono/DBusType/String.cs (Append): Don't leak the string
that we pass into unmanged code.
2005-03-07 John (J5) Palmieri <johnp@redhat.com>
* NEWS: Update for 0.31
* configure.in: Release 0.31
add LT_CURRENT, LT_REVISION, LT_AGE for easy soname bumping
* qt/Makefile.am: fixed build
* dbus/Makefile.am: soname bump for libdbus
* glib/Makefile.am: soname bump for libdbus-glib
2005-03-05 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.c:
(pseudorandom_generate_random_bytes_buffer): fix to have no return
value
(_dbus_generate_random_bytes_buffer): fix return value
* dbus/dbus-sysdeps-util.c: s/GETPWNAME/GETPWNAM/ so configure
checks actually work, from Tom Parker <fdo@tevp.net>
2005-03-01 Colin Walters <walters@verbum.org>
* test/glib/test-dbus-glib.c (lose, lose_gerror): Utility
functions copied from dbus-glib-tool.c.
(main): Convert lots of error code to use them.
Also add some testing for introspection bits.
2005-03-01 Colin Walters <walters@verbum.org>
* doc/TODO: Remove introspection signature TODO.
2005-02-27 Colin Walters <walters@verbum.org>
* glib/dbus-gidl.c (property_info_get_type, arg_info_get_type):
Change return value to const char * instead of int so we can do
full signatures.
(struct PropertyInfo, struct ArgInfo): Store char *.
(property_info_new, arg_info_new): Update parameters, strdup.
(property_info_unref, arg_info_unref): Free.
* glib/dbus-gidl.h: Update prototypes.
* glib/dbus-gparser.c (basic_type_from_string): Delete.
(validate_signature): New function, just validates signature and
sets GError.
(parse_property, parse_arg): Invoke validate_signature. Store
signature instead of just type code.
* glib/dbus-gvalue.c (base_type_from_signature): New utility
function to return a primary type for a signature, dropping
information about types in container types.
(dbus_gvalue_genmarshal_name_from_type)
(dbus_gvalue_binding_type_from_type)
(dbus_gvalue_ctype_from_type): Update to take full signature
instead of type code.
(dbus_gtype_to_dbus_type): Moved here from glib/dbus-gobject.c.
* glib/dbus-gvalue.h: Update prototypes for above.
* glib/dbus-gobject.c (gtype_to_dbus_type): Moved to
glib/dbus-gvalue.c as dbus_gtype_to_dbus_type.
(introspect_properties, introspect_signals, write_interface):
Update to handle signatures, and remove usage of
_dbus_gutils_type_to_string.
(handle_introspect): Print out type codes instead of e.g. "string"
in hardcoded introspection XML; also use x_AS_STRING constants
instead of hardcoding in string.
* glib/dbus-glib-tool.c (pretty_print): Handle signature change
to string. Remove usage of _dbus_gutils_type_to_string.
* glib/dbus-gutils.c (_dbus_gutils_type_to_string): Delete.
* glib/dbus-gutils.h (_dbus_gutils_type_to_string): Update for
deletion.
* glib/dbus-binding-tool-glib.c (compute_marshaller)
(compute_marshaller_name, generate_glue): Handle signature change
to string.
(write_formal_parameters, write_args_for_direction): Ditto, and
remove FIXME.
* tools/dbus-tree-view.c (type_to_string): Delete.
(info_set_func_text): Update to print full signatures.
* test/glib/test-service-glib.xml: Change types to new
introspection format.
2005-02-26 Havoc Pennington <hp@redhat.com>
* doc/TODO: remove the "guid" item
* test/glib/test-profile.c (no_bus_thread_func): use open_private
(with_bus_thread_func): use open_private
* dbus/dbus-connection.c (dbus_connection_open_private): new
function that works like the old dbus_connection_open()
(dbus_connection_open): now returns an existing connection if
possible
* dbus/dbus-server-unix.c (handle_new_client_fd_and_unlock): pass
through the GUID to the transport
* dbus/dbus-server.c (_dbus_server_init_base): keep around the
GUID in hex-encoded form.
* dbus/dbus-server-debug-pipe.c (_dbus_transport_debug_pipe_new):
pass GUID argument in to the transport
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_fd): add
guid argument
* dbus/dbus-transport.c (_dbus_transport_init_base): add guid argument
* dbus/dbus-auth.c (_dbus_auth_server_new): add guid argument
2005-02-25 Havoc Pennington <hp@redhat.com>
* doc/dbus-specification.xml: document the GUID thing
* dbus/dbus-server.c (_dbus_server_init_base): initialize a
globally unique ID for the server, and put a "guid=hexencoded"
field in the address
* dbus/dbus-bus.c: fix missing #include of dbus-threads-internal.h
* dbus/dbus-message.c: ditto
* dbus/dbus-dataslot.c: ditto
* dbus/dbus-list.c: ditto
* dbus/dbus-internals.h: wait, just include
dbus-threads-internal.h here
* dbus/dbus-string.c (_dbus_string_copy_to_buffer): move back for
use in main library
* dbus/dbus-sysdeps.c (_dbus_generate_random_bytes_buffer): new function
2005-02-24 Colin Walters <walters@verbum.org>
* test/glib/Makefile.am (EXTRA_DIST): Add test-service-glib.xml
2005-02-24 John (J5) Palmieir <johnp@redhat.com>
* glib/Makefile.am: added dbus-gobject.h to sources list
so distcheck doesn't fail
2005-02-24 Havoc Pennington <hp@redhat.com>
* dbus/dbus-server.c, dbus/dbus-server-unix.c: change semantics so
you must disconnect before unref, since locking and other things
are screwed up otherwise. Fix assorted other locking stuff.
* dbus/dbus-signature.c (dbus_signature_iter_get_element_type):
fix compilation
* dbus/dbus-threads-internal.h: move the mutex/condvar wrappers
into a private header and don't export from the library
* throughout - call _dbus_thread_stuff vs. dbus_thread_stuff
2005-02-24 Colin Walters <walters@verbum.org>
* dbus/dbus-signature.c: New file; implements various functions
related to type signatures. Includes an interator for parsing,
validation functions.
(dbus_type_is_basic): Moved here from
dbus-marshal-basic.c:_dbus_type_is_basic.
(dbus_type_is_container): Moved here from
dbus-marshal-basic.c:_dbus_type_is_container.
All callers of _dbus_type_is_container and _dbus_type_is_basic
updated, and include dbus-signature.h.
* dbus/dbus-signature.h: New file; prototypes for the above.
* dbus/Makefile.am (DBUS_LIB_SOURCES): Add dbus-signature.c,
dbus-signature.h.
* dbus/dbus-marshal-basic.c (map_type_char_to_type): New utility
function factored out of _dbus_first_type_in_signature.
(_dbus_first_type_in_signature_c_str): New function; returns first
type code for a type signature character.
* dbus/dbus-marshal-basic.h: Prototype _dbus_first_type_in_signature_c_str,
handle function moves.
* dbus/dbus-marshal-recursive.h: Export _dbus_type_signature_next.
* dbus/dbus-marshal-recursive.c (_dbus_type_signature_next): New
function; skips to next complete type in type signature.
Implemented using previous skip_one_complete_type. Now
skip_one_complete_type just delegates to
_dbus_type_signature_next.
* dbus/dbus-marshal-basic.c (_dbus_type_is_basic): Moved
to dbus-signature.c
(_dbus_type_is_container): Ditto.
* doc/dbus-specification.xml: Update introspection sample to
use real type signatures.
* dbus/dbus-test.h: Prototype signature test.
* dbus/dbus-test.c (dbus_internal_do_not_use_run_tests): Run
signature tests.
* dbus/dbus-protocol.h (DBUS_ERROR_INVALID_SIGNATURE): New error.
2005-02-23 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx.in (PendingCall::get_reply):
s/dbus_pending_call_get_reply/dbus_pending_call_steal_reply
2005-02-21 Colin Walters <walters@verbum.org>
* dbus/dbus-test-main.c (main): Take optional specific test
argument.
* dbus/dbus-test.c (run_test): New function, runs a test function
with no data directory.
(run_data_test): Like above, but takes data directory.
(dbus_internal_do_not_use_run_tests): Take
specific test argument. Replace lots of cut n' paste code
with run_test and run_data_test.
* dbus/dbus-test.h: Update prototype for
dbus_internal_do_not_use_run_tests.
2005-02-20 Havoc Pennington <hp@redhat.com>
Fix bugs reported by Daniel P. Berrange
* dbus/dbus-server.c (_dbus_server_unref_unlocked): new function
(protected_change_watch): new function
(_dbus_server_toggle_watch, _dbus_server_remove_watch)
(_dbus_server_add_watch): change to work like the
dbus-connection.c equivalents; like those, probably kind of
busted, but should at least mostly work for now
(dbus_server_disconnect): drop the lock if we were already
disconnected, patch from Daniel P. Berrange
* dbus/dbus-server.c (_dbus_server_toggle_timeout)
(_dbus_server_remove_timeout, _dbus_server_add_timeout): all the
same stuff
* doc/TODO: todo about unscrewing this mess
2005-02-19 Colin Walters <walters@verbum.org>
* glib/dbus-binding-tool-glib.c
(dbus_binding_tool_output_glib_server): Fix iochannel refcounting.
* glib/dbus-glib-tool.c: Include dbus-glib-tool.h, as well
as errno.h and sys/stat.h.
(lose): New function, prints error with
newline and exits.
(lose_gerror): Similar, but takes GError for message.
(main): Add --output argument to specify output file to write to,
instead of always printing to stdout. In this mode, determine
timestamps on source files to see whether any are newer than the
target file. If not, exit. Also convert a number of error
messages to use lose (since it's shorter), and switch to using
g_io_channel_shutdown.
2005-02-19 Havoc Pennington <hp@redhat.com>
* glib/dbus-gobject.c
(_dbus_glib_marshal_dbus_message_to_gvalue_array): add docs
* glib/dbus-glib.c: fix doxygen warnings
* glib/dbus-gparser.c (parse_annotation): error if an annotation
is found on an <arg>
2005-02-17 Colin Walters <walters@verbum.org>
* glib/dbus-gobject.h: Don't export
_dbus_glib_marshal_dbus_message_to_gvalue_array.
* glib/dbus-gobject.c (_dbus_glib_marshal_dbus_message_to_gvalue_array): Do rename.
(invoke_object_method): Handle it.
* glib/dbus-gproxy.c (marshal_dbus_message_to_g_marshaller):
Handle rename.
2005-02-17 Colin Walters <walters@verbum.org>
* bus/.cvsignore, doc/.cvsignore
* test/data/valid-service-files/.cvsignore, test/glib/.cvsignore:
Update.
2005-02-17 Colin Walters <walters@verbum.org>
* dbus/dbus-protocol.h (DBUS_SERVICE_ORG_FREEDESKTOP_DBUS):
Rename to DBUS_SERVICE_DBUS.
(DBUS_PATH_ORG_FREEDESKTOP_DBUS): Rename to DBUS_PATH_DBUS.
(DBUS_PATH_ORG_FREEDESKTOP_LOCAL): Rename to DBUS_PATH_LOCAL.
Change the value from "org.freedesktop.Local"
to "org.freedesktop.DBus.Local".
(DBUS_INTERFACE_ORG_FREEDESKTOP_DBUS): Rename to DBUS_INTERFACE_DBUS.
(DBUS_INTERFACE_ORG_FREEDESKTOP_INTROSPECTABLE): Rename to
DBUS_INTERFACE_INTROSPECTABLE.
Change the value from "org.freedesktop.Introspectable"
to "org.freedesktop.DBus.Introspectable".
(DBUS_INTERFACE_ORG_FREEDESKTOP_PROPERTIES): Rename to
DBUS_INTERFACE_PROPERTIES.
Change the value from "org.freedesktop.Properties"
to "org.freedesktop.DBus.Properties".
(DBUS_INTERFACE_ORG_FREEDESKTOP_PEER): Rename to
DBUS_INTERFACE_PEER.
Change the value from "org.freedesktop.Peer"
to "org.freedesktop.DBus.Peer".
(DBUS_INTERFACE_ORG_FREEDESKTOP_LOCAL):
DBUS_INTERFACE_LOCAL.
Change the value from "org.freedesktop.Local"
to "org.freedesktop.DBus.Local".
All other users of those constants have been changed.
* bus/driver.c (bus_driver_handle_introspect): Use constants.
* glib/dbus-gobject.c (handle_introspect): Use constants.
* doc/dbus-faq.xml, doc/dbus-specification.xml: Update for rename.
2005-02-17 Colin Walters <walters@verbum.org>
* glib/dbus-gparser.c (struct Parser): Add in_annotation boolean.
(parse_node, parse_interface, parse_method, parse_signal)
(parse_property, parse_annotation): Lose if we're currently in an
annotation.
(parse_annotation): New function.
(parser_start_element, parser_end_element): Handle annotation.
(parse_method, parse_interface): Remove support for c_name attribute,
switch to annotations.
* glib/dbus-gidl.h (interface_info_get_binding_names)
(method_info_get_binding_names)
(interface_info_get_binding_name, method_info_get_binding_name)
(interface_info_set_binding_name, method_info_set_binding_name):
Remove.
(interface_info_get_annotations, method_info_get_annotations)
(interface_info_get_annotation, method_info_get_annotation)
(interface_info_add_annotation, method_info_add_annotation):
Prototype.
* glib/dbus-gidl.c (struct InterfaceInfo): Substitute "annotations"
for "bindings".
(struct MethodInfo): Ditto.
Straightfoward conversion of binding methods into annotation methods
as prototyped.
* glib/dbus-glib-tool.c (pretty_print): Print annotations.
* glib/dbus-binding-tool-glib.h (DBUS_GLIB_ANNOTATION_C_SYMBOL): Define.
* glib/dbus-binding-tool-glib.c (gather_marshallers, generate_glue):
Use new annotation API.
* doc/introspect.dtd: Fix a number of DTD syntax errors. Add
annotation element.
* doc/dbus-specification.xml: Discuss introspection annotations,
include list of well-known annotations.
* test/glib/test-service-glib.xml: Make validate against new DTD.
2005-02-17 Colin Walters <walters@verbum.org>
This patch is based on initial work from
Paul Kuliniewicz <kuliniew@purdue.edu>.
* glib/dbus-gvalue.c (dbus_gvalue_init): New function; move
initialization of GValue from dbus type to here.
(dbus_gvalue_genmarshal_name_from_type): New function; generates a string
for the "glib-genmarshal" program from a DBus type.
(dbus_gvalue_binding_type_from_type): New function; turns a DBus type
into the C name for it we use in the glib bindings.
(dbus_gvalue_ctype_from_type): New function; maps a DBus type into a
glib C type (not GValue).
(dbus_gvalue_demarshal): invoke dbus_gvalue_init.
* glib/dbus-gutils.c (_dbus_gutils_wincaps_to_uscore): Moved here
from dbus-gobject.c.
* glib/dbus-gutils.h: Prototype it.
* glib/dbus-gproxy.c: Include new dbus-gobject.h.
(marshal_dbus_message_to_g_marshaller): Use new shared function
dbus_glib_marshal_dbus_message_to_gvalue_array.
* glib/dbus-gparser.c (parse_interface, parse_method): Handle c_name attribute.
Will be changed once we have annotations.
* glib/dbus-gobject.c: Change info_hash_mutex from GStaticMutex to
GStaticRWLock. Callers updated.
(wincaps_to_uscore): Move to dbus-gutils.c. Callers updated.
(string_table_next): New function for iterating over zero-terminated
string value array.
(string_table_lookup): New function; retrieves specific entry in
array.
(get_method_data): New function; look up method data in object data chunk.
(object_error_domain_prefix_from_object_info)
(object_error_code_from_object_info): New functions, but not implemented yet.
(method_interface_from_object_info): New function; retrieve interface name.
(method_name_from_object_info): New function; retrieve method name.
(method_arg_info_from_object_info): New function; retrieve argument data.
(arg_iterate): New function; iterates over serialized argument data.
(method_dir_signature_from_object_info): New function; returns a
GString holding type signature for arguments for just one
direction (input or output).
(method_input_signature_from_object_info)
(method_output_signature_from_object_info): New functions.
(dbus_glib_marshal_dbus_message_to_gvalue_array): New shared function;
converts dbus message arguments into a GValue array. Used for both
signal handling and method invocation.
(struct DBusGlibWriteIterfaceData): New utility structure.
(write_interface): New function; generate introspection XML for
an interface.
(introspect_interfaces): New function; gathers all interface->methods,
generates introspection XML for them.
(handle_introspect): Invoke introspect_interfaces.
(get_object_property): Be sure to zero-initalize stack-allocated GValue.
(lookup_object_and_method): New function; examines an incoming message
and attempts to match it up (via interface, method name, and argument
signature) with a known object and method.
(gerror_domaincode_to_dbus_error_name): New function; converts a
GError domain and code into a DBus error name. Needs GError data
added to object introspection to work well.
(gerror_to_dbus_error_message): Creates a DBusMessage error return from
GError.
(invoke_object_method): New function to invoke an object method
looked up via lookup_object_and_method. Parses the incoming
message, turns it into a GValue array, then invokes the marshaller
specified in the DBusGMethodInfo. Creates a new message with
either return values or error message as appropriate.
(gobject_message_function): Invoke lookup_object_and_method and
invoke_object_method.
* glib/dbus-glib-tool.c: Include dbus-binding-tool-glib.h.
(enum DBusBindingOutputMode): New enum for binding output modes.
(pretty_print): Print binding names.
(dbus_binding_tool_error_quark): GError bits.
(version): Fix typo.
(main): Create GIOChannel for output. Parse new --mode argument,
possible values are "pretty-print", "glib-server", "glib-client".
Use mode to invoke appropriate function.
* glib/dbus-gobject.h: Prototype dbus_glib_marshal_dbus_message_to_gvalue_array.
* glib/dbus-glib-tool.h: New header, just includes GError bits
for now.
* glib/dbus-gidl.c (struct InterfaceInfo): Add bindings hashtable;
maps binding style to name.
(struct MethodInfo): Ditto.
(get_hash_keys, get_hash_key): Utility function, returns keys for
a GHashTable.
(interface_info_new, method_info_new): Initialize bindings.
(interface_info_unref, method_info_unref): Destroy bindings.
(method_info_get_binding_names, method_info_get_binding_name)
(interface_info_get_binding_names, interface_info_get_binding_name):
Functions for retrieving binding names.
(method_info_set_binding_name, interface_info_set_binding_name):
Functions for setting binding names.
* glib/dbus-binding-tool-glib.h: New file, has prototypes
for glib binding generation.
* glib/dbus-binding-tool-glib.c: New file, implements server-side
and client-side glib glue generation.
* glib/Makefile.am (dbus_binding_tool_SOURCES): Add
dbus-binding-tool-glib.c, dbus-binding-tool-glib.h,
dbus-glib-tool.h.
* dbus/dbus-glib.h (struct DBusGMethodMarshaller): Remove in favor
of using GClosureMarshal directly.
(struct DBusGObjectInfo): Add n_infos member.
* test/glib/test-service-glib.xml: New file; contains introspection data
for MyTestObject used in test-service-glib.c.
* test/glib/test-service-glib.c (enum MyObjectError): New GError enum.
(my_object_do_nothing, my_object_increment, my_object_throw_error)
(my_object_uppercase, my_object_many_args): New test methods.
(main): Use dbus_g_object_class_install_info to include generated object
info.
* test/glib/Makefile.am: Generate server-side glue for test-service-glib.c,
as well as client-side bindings.
* test/glib/test-dbus-glib.c: Include test-service-glib-bindings.h.
(main): Activate TestSuiteGLibService; test invoke a bunch of its methods
using both the dbus_gproxy stuff directly as well as the generated bindings.
2005-02-15 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.c (dbus_connection_dispatch): always
complete a pending call, don't run filters first.
* glib/dbus-gproxy.c (dbus_g_proxy_end_call): change to use
dbus_pending_call_steal_reply
* dbus/dbus-pending-call.c (dbus_pending_call_block): just call
_dbus_connection_block_pending_call
(dbus_pending_call_get_reply): change to steal_reply and return a
ref
* dbus/dbus-connection.c
(dbus_connection_send_with_reply_and_block): port to work in terms
of DBusPendingCall
(_dbus_connection_block_pending_call): replace block_for_reply
with this
2005-02-14 Havoc Pennington <hp@redhat.com>
* dbus/dbus-userdb-util.c (_dbus_user_database_lookup_group):
properly handle looking up group information by name; fix
from j@bootlab.org
2005-02-13 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.c (dbus_connection_return_message)
(dbus_connection_borrow_message): hold dispatch lock while message
is outstanding
(_dbus_connection_block_for_reply): hold dispatch lock while we
block for the reply, so nobody steals our reply
(dbus_connection_pop_message): hold the dispatch lock while we
pluck the message
2005-02-13 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.c (_dbus_connection_acquire_dispatch)
(_dbus_connection_release_dispatch)
(_dbus_connection_acquire_io_path)
(_dbus_connection_release_io_path): make the mutex and condvar
control access to the "acquired" flag. Drop the connection lock
while waiting on the condvar. Hopefully these are baby steps in
roughly the right direction.
2005-02-13 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.c: use separate mutexes for the condition
variables; this is some kind of baseline for sanity, but the
condition variables still aren't used correctly afaict
2005-02-13 Havoc Pennington <hp@redhat.com>
* dbus/dbus-object-tree.c (handle_default_introspect_and_unlock):
fix a double-unlock
* dbus/dbus-connection.c
(_dbus_connection_detach_pending_call_unlocked): add this
Initial semi-correct pass through to fix thread locking; there are
still some issues with the condition variable paths I'm pretty
sure
* dbus/dbus-server.c: add a mutex on DBusServer and appropriate
lock/unlock calls
* dbus/dbus-connection.c (_dbus_connection_do_iteration_unlocked):
rename to add _unlocked
(struct DBusConnection): move "dispatch_acquired" and
"io_path_acquired" to use only one bit each.
(CONNECTION_LOCK, CONNECTION_UNLOCK): add checks with !DBUS_DISABLE_CHECKS
(dbus_connection_set_watch_functions): hacky fix to reentrancy
(_dbus_connection_add_watch, _dbus_connection_remove_watch)
(_dbus_connection_toggle_watch, _dbus_connection_add_timeout)
(_dbus_connection_remove_timeout)
(_dbus_connection_toggle_timeout): drop lock when calling out to
user functions; done in a hacky/bad way.
(_dbus_connection_send_and_unlock): add a missing unlock
(_dbus_connection_block_for_reply): add a missing unlock
* dbus/dbus-transport.c (_dbus_transport_get_is_authenticated):
drop lock in a hacky probably unsafe way to call out to user
function
2005-02-12 Havoc Pennington <hp@redhat.com>
* tools/dbus-tree-view.c (info_set_func_text): display more
details on args
* bus/driver.c (bus_driver_handle_list_services): list the bus
driver
* glib/dbus-gparser.c (parse_arg): generate an arg name if none is supplied
* glib/dbus-gidl.c (signal_info_get_n_args): new function
(method_info_get_n_args): new function
2005-02-12 Havoc Pennington <hp@redhat.com>
* bus/driver.c (bus_driver_handle_introspect): add introspection
for bus driver
2005-02-12 Havoc Pennington <hp@redhat.com>
* bus/driver.c: put the signature of each bus driver method in the
table of handlers and check it on incoming calls; this isn't
really useful, but going to add introspect support in a minute.
2005-02-11 Joe Shaw <joeshaw@novell.com>
* mono/Connection.cs: The unpredictability of finalizers in mono
prevents us from deterministically disconnecting the filters from
the Service class's finalizer, so move tracking of filters and
matches here. Add API for that.
* mono/Service.cs: Remove the code, add code which calls the
methods now on the Connection class.
2005-02-11 John (J5) Palmieri <johnp@redhat.com>
* python/dbus.py (class Sender): added to support dbus signals better
(Bus::add_signal_receiver): added expand_args parameter which defaults
to True. When expand args is True the signal handler will pass the
message arguments as parameters to the signal handler. If False
revert to previous behavior where the signal handler must get the
argument list from the message. This is to help port applications
like HAL that have a tendancy to send variable length argument lists.
self._match_rule_to_receivers is now a dict of dicts.
(Bus::remove_signal_receiver): pop handler off the dict intead of
removing it from a list
(Bus::_signal_func): change signal handlers so that interface,
signal_name, service, path and message are packed into a Sender
object and that is passed to the handler. If expand_args is True
extract the args list from the message and append it to the parameter
list
* python/dbus_bindings.pyx.in (class Signature): added to support
signiature types
(MessageIter::__init__): changed iteration limit to match D-BUS
(MessageIter::get*): added INT16, UINT16, SIGNATURE, DICT_ENTRY,
STRUCT and VARIENT type support
(MessageIter::python_value_to_dbus_sig): made recursive to support
recursive types
(MessageIter::append*): added Signature, dict, tuple
support
* python/examples/example-client.py: added examples of getting tuples
and dicts
* python/examples/example-service.py: added examples of sending tuples
and dicts
* python/examples/example-signal-recipient.py: Fixed to handle new
signal callback format
2005-02-10 Havoc Pennington <hp@redhat.com>
* test/glib/test-dbus-glib.c (main): fix so this test doesn't fail
(call dbus_g_proxy_add_signal)
* dbus/dbus-server-unix.c (_dbus_server_new_for_tcp_socket):
escape the hostname
(_dbus_server_new_for_domain_socket): escape the path
* dbus/dbus-address.c (dbus_address_escape_value): new
(dbus_address_unescape_value): new
(dbus_parse_address): unescape values
* dbus/dbus-string.c (_dbus_string_append_byte_as_hex): new function
* doc/dbus-specification.xml: explain how to escape values in
addresses
2005-02-10 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message-factory.c (generate_special): modify test to
avoid using a non-basic dict key
* dbus/dbus-marshal-validate-util.c: add test for the below
* doc/dbus-specification.xml: require that dict keys are a basic
type
* dbus/dbus-marshal-validate.c
(_dbus_validate_signature_with_reason): require that dict key is a
basic type
2005-02-10 Havoc Pennington <hp@redhat.com>
* dbus/dbus-object-tree.c (handle_default_introspect_and_unlock):
change to be _and_unlock instead of _unlocked
* dbus/dbus-connection.c
(_dbus_connection_send_preallocated_unlocked_no_update): rename to
have no_update so we can find this bug quickly in future
2005-02-10 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message-util.c (verify_test_message): tests for string
array
* dbus/dbus-message.c (dbus_message_append_args_valist): add
support for arrays of string/signature/path
2005-02-10 Joe Shaw <joeshaw@novell.com>
* dbus/dbus-connection.c
(_dbus_connection_queue_received_message_link,
_dbus_connection_message_sent): Add the path to
the verbose output.
(_dbus_connection_send_preallocated_and_unlock): Added. Calls
_dbus_connection_send_preallocated_unlocked(), updated the
dispatch status, and unlocks. Fixes a bug where certain
situations (like a broken pipe) could cause a Disconnect message
to not be sent, tricking the bus into thinking a service was still
there when the process had quit.
(_dbus_connection_send_preallocated): Call
_dbus_connection_send_preallocated_and_unlock().
(_dbus_connection_send_and_unlock): Added. Calls
_dbus_connection_send_preallocated_and_unlock().
(dbus_connection_send): Call _dbus_connection_send_and_unlock().
(dbus_connection_send_with_reply): Update the dispatch status and
unlock.
* mono/Service.cs (~Service): Added. Removes the filter so that
we don't get unmanaged code calling back into a GCed delegate.
(RemoveFilter); Added.
2005-02-09 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-message.c (dbus_message_iter_open_container):
- Removed check for iterator type being an array because
get_arg_type does not work with writer iterators
- Pass NULL to _dbus_type_writer_recurse if signiture is NULL
2005-02-07 Havoc Pennington <hp@redhat.com>
* doc/dbus-specification.xml: some more language cleanups; add
stuff about how to deal with invalid protocol and extension
points; add _ to allowed chars in auth commands; add EXTENSION_
auth command prefix
2005-02-06 Havoc Pennington <hp@redhat.com>
* s/expected/required/ in a couple places for clarity
2005-02-07 Colin Walters <walters@verbum.org>
* bus/selinux.c (bus_selinux_allows_send): Handle NULL for
sender or proposed_recipient.
2005-02-06 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message-factory.c (generate_special): more tests
* dbus/dbus-marshal-validate.c (validate_body_helper): detect
array length that exceeds the maximum
2005-02-05 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message-factory.c (generate_special): more test cases,
increasing coverage
* dbus/dbus-marshal-validate.c (validate_body_helper): return the
reason why a signature was invalid
* dbus/dbus-marshal-header.c (load_and_validate_field): fix to
skip the length of the string before we look at it in validation
* dbus/dbus-string-util.c (_dbus_string_test): add tests for
equal_substring
* dbus/dbus-message.c (_dbus_message_loader_new): default
max_message_length to DBUS_MAXIMUM_MESSAGE_LENGTH
2005-02-05 Havoc Pennington <hp@redhat.com>
* dbus/dbus-marshal-validate.c (validate_body_helper): fix crash
if the signature of a variant was empty
(_dbus_validate_signature_with_reason): catch "(a)" (array inside
struct with no element type)
* dbus/dbus-message-factory.c (generate_uint32_changed): add more
mangled messages to break things
2005-02-04 Havoc Pennington <hp@redhat.com>
* glib/dbus-gproxy.c (dbus_g_proxy_disconnect_signal): use
g_quark_try_string() so it actually can return 0
(dbus_g_proxy_connect_signal): ditto
2005-02-04 Havoc Pennington <hp@redhat.com>
* glib/dbus-gproxy.c (dbus_g_proxy_emit_remote_signal): fix a
bogus warning
(tristring_from_message): assert cleanly on null path/interface
(should not be possible though I decided later)
(dbus_g_proxy_dispose): move proxy manager unregistration here
(DBUS_G_PROXY_DESTROYED): add this macro, and use it in a bunch of
g_return_if_fail() checks
2005-02-04 Havoc Pennington <hp@redhat.com>
* doc/Makefile.am (EXTRA_DIST): add DTDs to makefile
* doc/introspect.dtd: add introspect.dtd from David A. Wheeler
(with some minor changes)
* doc/dbus-specification.xml: add deprecated attribute to
introspection format
2005-01-31 Havoc Pennington <hp@redhat.com>
* glib/dbus-gproxy.c: rewrite how signals work again, this time I
think it's sort of right
2005-01-30 Havoc Pennington <hp@redhat.com>
* tools/dbus-viewer.c: kind of half-ass hook up the option menu.
2005-01-30 Havoc Pennington <hp@redhat.com>
* tools/dbus-names-model.c: dynamically watch NameOwnerChanged
* autogen.sh: change to autotools 1.9
* glib/dbus-gproxy.c: completely change how signals work
(dbus_g_proxy_add_signal): new function to specify signature of a
signal
(dbus_g_proxy_emit_received): marshal the dbus message to GValues,
and g_warning if the incoming message has the wrong signature.
2005-01-30 Havoc Pennington <hp@redhat.com>
* tools/dbus-names-model.c (have_names_notify): fix this
* dbus/dbus-message.c (_dbus_message_iter_get_args_valist): clean
up the string array handling a bit
2005-01-30 Havoc Pennington <hp@redhat.com>
* glib/dbus-glib.c (dbus_g_pending_call_set_notify): new function
(dbus_g_pending_call_cancel): new function
* dbus/dbus-glib.h: move GType decls for connection/message here;
* dbus/dbus-glib.c: move all the g_type and ref/unref stuff in
here, just kind of rationalizing how we handle all that
* tools/dbus-names-model.c: new file for a tree model listing the
services on a bus
* tools/dbus-tree-view.c (model_new): use proper typing on the
model rows
2005-01-30 Havoc Pennington <hp@redhat.com>
* glib/dbus-gmain.c: add a custom GSource back that just checks
whether the message queue has anything in it; otherwise, there are
cases where we won't see messages in the queue since there was no
IO visible to the glib main loop
* dbus/dbus-connection-internal.h (_DBUS_DEFAULT_TIMEOUT_VALUE):
increase default message timeout to 25 seconds
2005-01-30 Havoc Pennington <hp@redhat.com>
* test/glib/test-profile.c (no_bus_stop_server): remove the
warning about the g_warning that I just fixed
* glib/dbus-gmain.c: rewrite the main loop stuff to avoid the
custom source, seems to be a lot easier to understand and work
better.
2005-01-30 Havoc Pennington <hp@redhat.com>
I think this main loop thing is conceptually broken, but here are
some band aids. I'll maybe rewrite it in a minute.
* glib/dbus-gmain.c (add_timeout): timeout stuff doesn't use the
custom GSource, so don't pass it in; confusing
(gsource_server_finalize, gsource_connection_finalize): add
finalize handlers that remove all the watches.
2005-01-30 Havoc Pennington <hp@redhat.com>
* glib/dbus-gobject.c (introspect_properties): fix the XML
generated
* dbus/dbus-message.c (dbus_message_unref): add an in_cache flag
which effectively detects the use of freed messages
* glib/dbus-gobject.c (handle_introspect): modify and return the
reply message instead of the incoming message
* dbus/dbus-object-tree.c (handle_default_introspect_unlocked):
gee, maybe it should SEND THE XML instead of just making a string
and freeing it again ;-)
* tools/dbus-print-message.c (print_message): improve printing of
messages
* configure.in: add debug-glib.service to the output
2005-01-30 Havoc Pennington <hp@redhat.com>
dbus-viewer introspected and displayed the bus driver
* dbus/dbus-object-tree.c
(object_tree_test_iteration): add tests for a handler registered on "/"
* dbus/dbus-object-tree.c
(_dbus_decompose_path): fix to handle path "/" properly
(run_decompose_tests): add tests for path decomposition
* glib/dbus-gutils.c (_dbus_gutils_split_path): fix to handle "/"
properly
* glib/dbus-gobject.c (handle_introspect): fix quotes
* test/glib/run-test.sh: support launching the bus, then running
dbus-viewer
* test/glib/test-service-glib.c (main): put in a trivial gobject
subclass and register it on the connection
* bus/driver.c (bus_driver_handle_introspect): implement
introspection of the bus driver service
* dbus/dbus-protocol.h: add #defines for the XML namespace,
identifiers, doctype decl
* bus/driver.c (bus_driver_handle_get_service_owner): handle
attempts to get owner of DBUS_SERVICE_ORG_FREEDESKTOP_DBUS by
returning the service unchanged.
(bus_driver_handle_message): remove old check for reply_serial in
method calls, now the message type deals with that
(bus_driver_handle_message): handle NULL interface
* glib/dbus-gproxy.c (dbus_g_proxy_get_bus_name): new function
* glib/dbus-gloader-expat.c (description_load_from_string): allow
-1 for len
* tools/dbus-viewer.c: add support for introspecting a service on
a bus
* glib/dbus-gproxy.c (dbus_g_pending_call_ref): add
(dbus_g_pending_call_unref): add
2005-01-29 Havoc Pennington <hp@redhat.com>
* tools/dbus-tree-view.c: add support for displaying properties.
(run dbus-viewer with an introspect xml file as arg, then resize
the window so the tree elements show up, not sure what that is)
* glib/dbus-gobject.c (handle_introspect): return
org.freedesktop.Properties and org.freedesktop.Introspectable
interfaces when we are introspected.
* doc/dbus-specification.xml: allow empty interface name when
Get/Set a property
2005-01-29 Havoc Pennington <hp@redhat.com>
* glib/Makefile.am: rename dbus-glib-tool to dbus-binding-tool;
though it uses glib, it could be extended for any binding in
principle
* glib/dbus-gobject.c (gobject_message_function): change to the
new way properties work
* dbus/dbus-protocol.h: add the new interfaces
* doc/dbus-specification.xml: document the introspection format,
Introspectable interface, and add an org.freedesktop.Properties
interface.
* glib/dbus-gparser.c: add support for a <property> element
* glib/dbus-gidl.c: add PropertyInfo
* glib/dbus-gobject.c (handle_introspect): put the outermost
<node> outside the signal and property descriptions.
(introspect_properties): export properties as <property> rather
than as method calls
2005-01-28 Havoc Pennington <hp@redhat.com>
* doc/TODO, doc/dbus-specification.xml: spec and TODO tweaks
related to authentication protocol
2005-01-28 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx.in: Updated to handle new D-BUS type system
- BUS_ACTIVATION -> BUS_STARTER
- DBUS_BUS_ACTIVATION -> DBUS_BUS_STARTER
- class MessageIter (__init__): Added recursion checking
so we throw a nice error instead of just disconnecting from the
bus.
(get): Added arg_type parameter for recursion.
Removed the nil type
Added signiture type placeholder (not implemented)
Added struct type placeholder (not implemented)
Added varient type placeholder (not implemented)
Commented out dict type for now
(get_element_type): renamed from get_array_type
(get_*): changed to use the dbus_message_iter_get_basic API
(get_*_array): removed in favor of recursive get_array method
(get_array): new recursive method which calls get to marshal
the elements of the array
(value_to_dbus_sig): New method returns the corrasponding
dbus signiture to a python value
(append): Comment out dict handling for now
Handle lists with the new recursive API
Comment out None handling for now
(append_nil): removed
(append_*): changed to use dbus_message_iter_append_basic API
(append_*_array): removed in favor of recursive append_array
method
(__str__): Make it easier to print out recursive iterators
for debugging
- class Message (__str__): moved type inspection to the
MessageIter class' __str__ method
(get_iter): Added an append parameter wich defaults to False
If True use the new API's to create an append iterator
* python/dbus.py: Update to use new bindings API
- TYPE_ACTIVATION -> TYPE_STARTER
- class Bus (_get_match_rule): GetServiceOwner -> GetNameOwner
- class ActivationBus -> class StarterBus
- class RemoteObject (__call__): get an append iterator
- (_dispatch_dbus_method_call): get an append iterator
- class Object (emit_signal): get an append iterator
* python/examples/: Fixed up the examples to work with the new API
2005-01-28 Joe Shaw <joeshaw@novell.com>
* configure.in: Bump version up to 0.30.
* HACKING: Add a release item to bump the version number up after
a release.
2005-01-28 Havoc Pennington <hp@redhat.com>
* doc/dbus-specification.xml: update to describe 16-bit types and
dict entries
* dbus/dbus-marshal-basic.c (_dbus_unpack_uint16): fix broken
assertion
* dbus/dbus-protocol.h (DBUS_TYPE_DICT_ENTRY): add DICT_ENTRY as a
type
* dbus/dbus-marshal-recursive.c: implement
2005-01-27 Havoc Pennington <hp@redhat.com>
* dbus/dbus-arch-deps.h.in: add 16/32-bit types
* configure.in: find the right type for 16 and 32 bit ints as well
as 64
* dbus/dbus-protocol.h (DBUS_TYPE_INT16, DBUS_TYPE_UINT16): add
the 16-bit types so people don't have to stuff them in 32-bit or
byte arrays.
2005-01-27 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.c: byteswap the message if you init an
iterator to read/write from it
* dbus/dbus-marshal-byteswap.c: new file implementing
_dbus_marshal_byteswap()
* dbus/dbus-marshal-basic.c: add _dbus_swap_array()
2005-01-26 Havoc Pennington <hp@redhat.com>
* dbus/dbus-marshal-validate-util.c: break this out (and fix
build, apparently - nobody noticed?)
2005-01-26 Havoc Pennington <hp@redhat.com>
* dbus/dbus-marshal-recursive.h: remove todo comment
2005-01-25 Joe Shaw <joeshaw@novell.com>
* Land the mono binding changes to conform to the new APIs.
* mono/Makefile.am: Remove Custom.cs, DBusType/Custom.cs,
DBusType/Dict.cs, and DBusType/Nil.cs from the build.
* mono/Arguments.cs (GetCodeAsString): Added. Returns the dbus
type code as a string.
(InitAppending): Rename dbus_message_append_iter_init() to
dbus_message_iter_init_append().
* mono/BusDriver.cs: Rename ServiceEventHandler to
NameOwnerChangedHandler. Rename GetServiceOwner to GetOwner.
Rename ServiceOwnerChanged to NameOwnerChanged.
* mono/Connection.cs: Rename BaseService to UniqueName, and the
underlying C call.
* mono/Custom.cs: Removed. The CUSTOM type has been removed.
* mono/Service.cs: Rename Exists to HasOwner, internally rename
dbus_bus_acquire_service() to dbus_bus_request_name().
* mono/DBusType/Array.cs (ctor): Use Type.GetElementType() instead
of Type.UnderlyingSystemType to get the correct element type for
the array.
(ctor): Update code for new APIs: use dbus_message_iter_recurse(),
dbus_message_get_{element|arg}_type() instead of
dbus_message_iter_init_array_iterator().
(Append): Replace dbus_message_iter_append_array() with
dbus_message_iter_open_container() and
dbus_message_iter_close_container().
* mono/DBusType/Custom.cs, mono/DBusType/Nil.cs: Removed. These
types have been removed.
* mono/DBusType/*.cs: Replace calls of
dbus_message_iter_get_[type]() to dbus_message_iter_get_basic(),
but specify the type in the DllImport extern declaration. Ditto
for dbus_message_iter_append_[type]() ->
dbus_message_iter_append_basic().
* mono/example/BusListener.cs: Update for ServiceEventHandler ->
NameOwnerChangedHandler.
2005-01-25 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx.in: Rename of methods and bindings
- get_base_service -> get_unique_name
- bus_get_base_service -> bus_get_unique_name
- dbus_bus_get_base_service -> dbus_bus_get_unique_name
- ACTIVATION_REPLY_ACTIVATED -> DBUS_START_REPLY_SUCCESS
- ACTIVATION_REPLY_ALREADY_ACTIVE -> DBUS_START_REPLY_ALREADY_RUNNING
- bus_activate_service -> bus_start_service_by_name
- dbus_bus_activate_service -> dbus_bus_start_service_by_name
- bus_acquire_service -> bus_request_name
- dbus_bus_acquire_service -> dbus_bus_request_name
- bus_service_exists -> bus_name_has_owner
- dbus_bus_service_exists -> dbus_bus_name_has_owner
* python/dbus.py: Rename of methods
- activate_service -> start_service_by_name
- bus_acquire_service -> bus_request_name
- ACTIVATION_REPLY_ACTIVATED -> START_REPLY_SUCCESS
- ACTIVATION_REPLY_ALREADY_ACTIVE -> START_REPLY_ALREADY_RUNNING
2005-01-24 Joe Shaw <joeshaw@novell.com>
* dbus/dbus-connection.c (dbus_connection_dispatch): Print out the
signature for the method that can't be found.
* dbus/dbus-message.c (dbus_message_iter_init): To check to see if
the message has any arguments, we need to call
_dbus_type_reader_get_current_type(), not
_dbus_type_reader_has_next().
2005-01-24 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message-factory.c: more testing of message validation
* dbus/dbus-protocol.h (DBUS_MINIMUM_HEADER_SIZE): move to this
header
2005-01-23 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message-factory.c, dbus/dbus-message-util.c:
get this all working, not many tests in the framework yet though
2005-01-22 Havoc Pennington <hp@redhat.com>
* doc/dbus-faq.xml, doc/dbus-tutorial: add a FAQ and update
tutorial, based on work from David Wheeler.
2005-01-21 Havoc Pennington <hp@redhat.com>
* dbus/dbus-bus.c: add more return_if_fail checks
* dbus/dbus-message.c (load_message): have the "no validation"
mode (have to edit the code to toggle the mode for now though)
* dbus/dbus-marshal-header.c (_dbus_header_load): have a mode that
skips all validation; I want to use this at least for benchmark
baseline, I'm not sure if it should be a publicly-available switch.
2005-01-21 Havoc Pennington <hp@redhat.com>
* glib/dbus-gmain.c: don't put the GLib bindings in the same
toplevel doxygen group as the low-level API stuff
* dbus/dbus.h: note that libdbus is the low-level API
2005-01-20 Havoc Pennington <hp@redhat.com>
* update-dbus-docs.sh: script to update docs on the web site, only
works for me though. neener.
2005-01-20 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.c (_dbus_poll): amazingly, trying to compile
code can reveal bugs in it
2005-01-20 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.c (_dbus_poll): fix several bugs in the
select() version, patches from Tor Lillqvist
2005-01-20 Havoc Pennington <hp@redhat.com>
* doc/dbus-tutorial.xml: replace > with >
* bus/services.c (bus_registry_acquire_service): validate the name
and return a better error if it's no good.
* doc/dbus-specification.xml: note NO_AUTO_START change
* dbus/dbus-protocol.h (DBUS_HEADER_FLAG_NO_AUTO_START): change
from AUTO_START, we're toggling the default
* bus/dispatch.c: adapt the tests to change of auto-start default
2005-01-18 Havoc Pennington <hp@redhat.com>
* rename dbus-daemon-1 to dbus-daemon throughout
2005-01-18 Havoc Pennington <hp@redhat.com>
* Throughout, grand renaming to strip out the use of "service",
just say "name" instead (or "bus name" when ambiguous). Did not
change the internal code of the message bus itself, only the
programmer-facing API and messages.
* doc/dbus-specification.xml: further update the message bus section
* bus/config-parser.c (all_are_equiv): fix bug using freed string
in error case
2005-01-17 Havoc Pennington <hp@redhat.com>
* dbus/dbus-types.h: remove 16-bit types since we don't use them
ever
* dbus/dbus-marshal-validate.c (_dbus_validate_path): disallow any
"invalid name character" not only non-ASCII
* doc/dbus-specification.xml: further update spec, message bus
parts are still out-of-date but the marshaling etc. stuff is now
accurate-ish
2005-01-17 Havoc Pennington <hp@redhat.com>
* doc/dbus-specification.xml: partially update spec
2005-01-17 Havoc Pennington <hp@redhat.com>
* Throughout, align variant bodies according to the contained
type, rather than always to 8. Should save a fair bit of space in
message headers.
* dbus/dbus-marshal-validate.c (_dbus_validate_body_with_reason):
fix handling of case where p == end
* doc/TODO: remove the dbus_bool_t item and variant alignment items
2005-01-17 Havoc Pennington <hp@redhat.com>
* dbus/dbus-types.h: hardcode dbus_bool_t to 32 bits
* Throughout: modify DBUS_TYPE_BOOLEAN to be a 32-bit type instead
of an 8-bit type. Now dbus_bool_t is the type to use whenever you
are marshaling/unmarshaling a boolean.
2005-01-16 Havoc Pennington <hp@redhat.com>
This is about it on what can be disabled/deleted from libdbus
easily, back below 150K anyhow. Deeper cuts are more work than
just turning the code off as I've done here.
* dbus/dbus-marshal-basic.c (_dbus_pack_int32): we don't need the
signed int convenience funcs
* dbus/dbus-internals.c (_dbus_verbose_real): omit when not in
verbose mode
* dbus/dbus-string-util.c, dbus/dbus-string.c: more breaking
things out of libdbus
* dbus/dbus-sysdeps.c, dbus/dbus-sysdeps-util.c: same
* dbus/dbus-hash.c: purge the TWO_STRINGS crap (well, make it
tests-enabled-only, though it should probably be deleted)
* dbus/dbus-message-util.c: same stuff
* dbus/dbus-auth-util.c: same stuff
2005-01-16 Havoc Pennington <hp@redhat.com>
* dbus/dbus-userdb-util.c: split out part of dbus-userdb.c
* dbus/dbus-sysdeps.c (_dbus_uid_from_string): move here to pave
way for stripping down dbus-userdb.c stuff included in libdbus.
Rename _dbus_parse_uid for consistency.
2005-01-16 Havoc Pennington <hp@redhat.com>
* dbus/dbus-internals.c (_dbus_real_assert): print the function
name the assertion failed in
* dbus/dbus-internals.h (_dbus_return_if_fail)
(_dbus_return_val_if_fail): assert that the name of the function
containing the check doesn't start with '_', since we only want to
use checks on public functions
* dbus/dbus-connection.c (_dbus_connection_ref_unlocked): change
checks to assertions
* dbus/dbus-marshal-header.c (_dbus_header_set_field_basic):
change checks to asserts for private function
* dbus/dbus-message.c (_dbus_message_set_serial): checks
to asserts for private function
* dbus/dbus-marshal-recursive.c (skip_one_complete_type): remove
broken assertion that was breaking make check
(_dbus_type_reader_array_is_empty): remove this rather than fix
it, was only used in assertions
2005-01-16 Havoc Pennington <hp@redhat.com>
* test/unused-code-gc.py: hacky script to find code that's used
only by the bus (not libdbus) or used only by tests or not used at
all. It has some false alarms, but looks like we can clean up a
lot of size from libdbus.
* dbus/dbus-sysdeps.c, dbus/dbus-sysdeps-utils.c,
dbus/Makefile.am: initially move 10K of binary size out of libdbus
2005-01-16 Havoc Pennington <hp@redhat.com>
* Add and fix docs according to Doxygen warnings throughout
source.
* dbus/dbus-marshal-recursive.c
(_dbus_type_reader_array_is_empty): change this to just call
array_reader_get_array_len() and make it static
* dbus/dbus-message.c (dbus_message_iter_get_element_type): rename
from get_array_type
(dbus_message_iter_init_append): rename from append_iter_init
* dbus/dbus-marshal-recursive.c
(_dbus_type_reader_get_element_type): rename from
_dbus_type_reader_get_array_type
2005-01-15 Havoc Pennington <hp@redhat.com>
* test/glib/test-profile.c (with_bus_server_filter): fix crash
* dbus/dbus-marshal-basic.c (_dbus_unpack_uint32): inline as macro
when DBUS_DISABLE_ASSERT
(_dbus_marshal_set_basic): be sure we align for the string length
* dbus/dbus-marshal-recursive.c (skip_one_complete_type): make
this look faster
* dbus/dbus-string.c (_dbus_string_get_const_data_len): add an
inline macro version
(_dbus_string_set_byte): provide inline macro version
2005-01-15 Havoc Pennington <hp@redhat.com>
* Land the new message args API and type system.
This patch is huge, but the public API change is not
really large. The set of D-BUS types has changed somewhat,
and the arg "getters" are more geared toward language bindings;
they don't make a copy, etc.
There are also some known issues. See these emails for details
on this huge patch:
http://lists.freedesktop.org/archives/dbus/2004-December/001836.html
http://lists.freedesktop.org/archives/dbus/2005-January/001922.html
* dbus/dbus-marshal-*: all the new stuff
* dbus/dbus-message.c: basically rewritten
* dbus/dbus-memory.c (check_guards): with "guards" enabled, init
freed blocks to be all non-nul bytes so using freed memory is less
likely to work right
* dbus/dbus-internals.c (_dbus_test_oom_handling): add
DBUS_FAIL_MALLOC=N environment variable, so you can do
DBUS_FAIL_MALLOC=0 to skip the out-of-memory checking, or
DBUS_FAIL_MALLOC=10 to make it really, really, really slow and
thorough.
* qt/message.cpp: port to the new message args API
(operator<<): use str.utf8() rather than str.unicode()
(pretty sure this is right from the Qt docs?)
* glib/dbus-gvalue.c: port to the new message args API
* bus/dispatch.c, bus/driver.c: port to the new message args API
* dbus/dbus-string.c (_dbus_string_init_const_len): initialize the
"locked" flag to TRUE and align_offset to 0; I guess we never
looked at these anyhow, but seems cleaner.
* dbus/dbus-string.h (_DBUS_STRING_ALLOCATION_PADDING):
move allocation padding macro to this header; use it to implement
(_DBUS_STRING_STATIC): ability to declare a static string.
* dbus/dbus-message.c (_dbus_message_has_type_interface_member):
change to return TRUE if the interface is not set.
* dbus/dbus-string.[hc]: move the D-BUS specific validation stuff
to dbus-marshal-validate.[hc]
* dbus/dbus-marshal-basic.c (_dbus_type_to_string): move here from
dbus-internals.c
* dbus/Makefile.am: cut over from dbus-marshal.[hc]
to dbus-marshal-*.[hc]
* dbus/dbus-object-tree.c (_dbus_decompose_path): move this
function here from dbus-marshal.c
2005-01-12 Joe Shaw <joeshaw@novell.com>
* NEWS: Update for 0.23.
* configure.in: Release 0.23.
2005-01-12 Joe Shaw <joeshaw@novell.com>
* mono/Makefile.am, mono/example/Makefile.am: Always build the
dbus DLL with --debug. Clean up after the .mdb files this leaves
behind.
* mono/doc/Makefile.am: Need to uninstall the docs on "make
uninstall"
* mono/Arguments.cs (GetDBusTypeConstructor): If the type
is an enum, get the enum's underlying type. Another mono
1.1.3 fix.
2005-01-11 Joe Shaw <joeshaw@novell.com>
Patch from Sjoerd Simons <sjoerd@luon.net>
* mono/Makefile.am, mono/example/Makefile.am: Don't redefine
DESTDIR. It breaks stuff.
2005-01-11 Joe Shaw <joeshaw@novell.com>
Patch from Tambet Ingo <tambet@ximian.com>
* mono/DBusType/Array.cs (Get): Get the underlying element type by
calling type.GetElementType(). The code previously depended on
broken Mono behavior, which was fixed in Mono 1.1.3.
* mono/DBusType/Dict.cs (constructor): Fix the parameters for
Activator.CreateInstance() so that the class's constructor is
called with the right parameters.
2005-01-11 Joe Shaw <joeshaw@novell.com>
Patch from Timo Teräs <ext-timo.teras@nokia.com>
* dbus/dbus-connection.c
(_dbus_connection_queue_received_message_link): Call
_dbus_connection_remove_timeout() instead of the _locked()
variant, since it's always called from
_dbus_connection_handle_watch(), which handles the locking.
Removed the _locked() variant since it's no longer used.
2005-01-03 Havoc Pennington <hp@redhat.com>
* dbus/dbus-internals.h: I'm an idiot, _dbus_assert certainly can
return
2004-12-26 Havoc Pennington <hp@redhat.com>
* dbus/dbus-internals.h: add _DBUS_GNUC_NORETURN to _dbus_assert
2005-01-03 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.c (_dbus_sysdeps_test): fix using == on
floating point
* dbus/dbus-string.c (_dbus_string_insert_alignment): new function
2005-01-02 Havoc Pennington <hp@redhat.com>
* dbus/dbus-internals.h (_DBUS_ALIGN_OFFSET): new macro
2005-01-01 Havoc Pennington <hp@redhat.com>
* configure.in: add -Wfloat-equal
2005-01-01 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.h: add _DBUS_DOUBLES_BITWISE_EQUAL macro,
for a variety of reasons '==' doesn't do this.
2004-12-31 Havoc Pennington <hp@redhat.com>
* dbus/dbus-string.c (_dbus_string_equal_substrings): new function
I keep wishing I had
2004-12-30 John (J5) Palmieri <johnp@redhat.com>
* python/dbus.py: s/ACTIVATION_REPLY_ACTIVE/ACTIVATION_REPLY_ACTIVATED
2004-12-30 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx.in: Change DBUS_ACTIVATION_REPLY_ACTIVATED
and DBUS_ACTIVATION_REPLY_ALREADY_ACTIVE to match the values in
dbus-protocol.h. Because they are defines and not enums they are not
autogenerated.
2004-12-26 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx.in (bus_activate_service): Bind
dbus_bus_activate_service
* python/dbus.py (Bus.activate_service): activate a service on the
bus.
2004-12-24 Havoc Pennington <hp@redhat.com>
* test/decode-gcov.c: change to use .gcno and .gcda files, but the
file format has also changed and I haven't adapted to that yet
* Makefile.am: load .gcno files from latest gcc
2004-12-23 John (J5) Palmieri <johnp@redhat.com>
* Patch from Rob Taylor <robtaylor@fastmail.fm>
* python/dbus_bindings.pyx.in (bus_get_unix_user): New
lowlevel binding
* python/dbus.py (get_unix_user): Added binding to
call dbus_bindings.bus_get_unix_user
* python/extract.py: Modified the proto_pat regex to
handle unsigned long
2004-12-21 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/make-dbus-glib-error-enum.sh: omit the function keyword for
better POSIX compliance.
2004-12-19 Havoc Pennington <hp@redhat.com>
* dbus/dbus-string.c (_dbus_string_insert_4_aligned)
(_dbus_string_insert_8_aligned): new functions
* dbus/dbus-string.c (_dbus_string_alloc_space): new function
2004-12-18 Havoc Pennington <hp@redhat.com>
* dbus/dbus-string.c (_dbus_string_validate_ascii): use ISASCII
macro
* dbus/dbus-message.c: fix a comment, and add a still-unused
not-implemented function
* dbus/dbus-marshal.h: fix comment
* dbus/dbus-internals.h (_DBUS_ISASCII): new macro
2004-12-17 Joe Shaw <joeshaw@novell.com>
* mono/DBusType/Byte.cs, mono/DBusType/Int32.cs,
mono/DBusType/Int64.cs, mono/DBusType/UInt32.cs,
mono/DBusType/UInt64.cs: Use Enum.GetUnderlyingType() instead of
Type.UnderlyingSystemType to get the actual system type
underneath. This code previously depended on the broken Mono
behavior, which was fixed in 1.1.3.
2004-11-27 Havoc Pennington <hp@redhat.com>
* dbus/dbus-string.h (_dbus_string_get_byte): inline when asserts
are disabled
(_dbus_string_get_const_data): inline when asserts are disabled
* dbus/dbus-message.c: record the _dbus_current_generation of
creation so we can complain if dbus_shutdown() is used improperly.
Do this only if checks are enabled.
* dbus/dbus-connection.c: ditto
2004-11-26 Havoc Pennington <hp@redhat.com>
* test/glib/test-profile.c: add with_bus mode to profile echoes
that go through the bus.
* test/glib/run-test.sh: add ability to run test-profile
* bus/dbus-daemon-1.1.in: fix to say that SIGHUP causes partial
config file reload.
2004-11-26 Havoc Pennington <hp@redhat.com>
* test/glib/test-profile.c: clean up how the fake_malloc_overhead
thing was implemented
2004-11-26 Havoc Pennington <hp@redhat.com>
* test/glib/test-profile.c: tweak a bit, add support for some
made-up minimal malloc overhead with plain sockets, since in
real life some sort of buffers are unavoidable thus we could
count them in the theoretical best case
2004-11-26 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.c (dbus_message_cache_or_finalize): fix bug
where I was trying to cache one too many messages
2004-11-26 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.c: reimplement message cache as an array which
makes the cache about twice as fast and saves maybe 1.5% overall
2004-11-26 Havoc Pennington <hp@redhat.com>
* dbus/dbus-threads.c (init_global_locks): forgot to put the
message cache lock here
2004-11-26 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.c (struct DBusMessage): put the locked bit and
the "char byte_order" next to each other to save 4 bytes
(dbus_message_new_empty_header): reduce preallocation, since the
message cache should achieve a similar effect
(dbus_message_cache_or_finalize, dbus_message_get_cached): add a
message cache that keeps a few DBusMessage around in a pool,
another 8% speedup or so.
* dbus/dbus-dataslot.c (_dbus_data_slot_list_clear): new function
2004-11-25 Havoc Pennington <hp@redhat.com>
* dbus/dbus-transport-unix.c (unix_do_iteration): if we're going
to write, without reading or blocking, try it before the poll()
and skip the poll() if nothing remains to write. This is about a
3% speedup in the echo client/server
2004-11-25 Havoc Pennington <hp@redhat.com>
The primary change here is to always write() once before adding
the write watch, which gives us about a 10% performance increase.
* dbus/dbus-transport-unix.c: a number of modifications to cope
with removing messages_pending
(check_write_watch): properly handle
DBUS_AUTH_STATE_WAITING_FOR_MEMORY; adapt to removal of
messages_pending stuff
(check_read_watch): properly handle WAITING_FOR_MEMORY and
AUTHENTICATED cases
(unix_handle_watch): after writing, see if the write watch can be
removed
(unix_do_iteration): assert that write_watch/read_watch are
non-NULL rather than testing that they aren't, since they
aren't allowed to be NULL. check_write_watch() at the end so
we add the watch if we did not finish writing (e.g. got EAGAIN)
* dbus/dbus-transport-protected.h: remove messages_pending call,
since it resulted in too much inefficient watch adding/removing;
instead we now require that the transport user does an iteration
after queueing outgoing messages, and after trying the first
write() we add a write watch if we got EAGAIN or exceeded our
max bytes to write per iteration setting
* dbus/dbus-string.c (_dbus_string_validate_signature): add this
function
* dbus/dbus-server-unix.c (unix_finalize): the socket name was
freed and then accessed, valgrind flagged this bug, fix it
* dbus/dbus-message.c: fix several bugs where HEADER_FIELD_LAST was taken
as the last valid field plus 1, where really it is equal to the
last valid field. Corrects some message corruption issues.
* dbus/dbus-mainloop.c: verbosity changes
* dbus/dbus-keyring.c (_dbus_keyring_new_homedir): handle OOM
instead of aborting in one of the test codepaths
* dbus/dbus-internals.c (_dbus_verbose_real): fix a bug that
caused not printing the pid ever again if a verbose was missing
the newline at the end
(_dbus_header_field_to_string): add HEADER_FIELD_SIGNATURE
* dbus/dbus-connection.c: verbosity changes;
(dbus_connection_has_messages_to_send): new function
(_dbus_connection_message_sent): no longer call transport->messages_pending
(_dbus_connection_send_preallocated_unlocked): do one iteration to
try to write() immediately, so we can avoid the write watch. This
is the core purpose of this patchset
(_dbus_connection_get_dispatch_status_unlocked): if disconnected,
dump the outgoing message queue, so nobody will get confused
trying to send them or thinking stuff is pending to be sent
* bus/test.c: verbosity changes
* bus/driver.c: verbosity/assertion changes
* bus/dispatch.c: a bunch of little tweaks to get it working again
because this patchset changes when/where you need to block.
2004-11-23 Havoc Pennington <hp@redhat.com>
* test/glib/test-profile.c: modify to accept a plain_sockets
argument in which case it will bench plain sockets instead of
libdbus, for comparison purposes.
2004-11-22 Havoc Pennington <hp@redhat.com>
* test/glib/test-profile.c (N_CLIENT_THREADS): run multiple
threads for more time, so sysprof can get a grip on it.
* dbus/dbus-string.c (_dbus_string_validate_utf8): remove
pointless variable
2004-11-13 Havoc Pennington <hp@redhat.com>
* test/glib/test-profile.c: fix this thing up a bit
* dbus/dbus-message.c (dbus_message_new_empty_header): increase
preallocation sizes by a fair bit; not sure if this will be an
overall performance win or not, but it does reduce reallocs.
* dbus/dbus-string.c (set_length, reallocate_for_length): ignore
the test hack that forced constant realloc if asserts are
disabled, so we can profile sanely. Sprinkle in some
_DBUS_UNLIKELY() which are probably pointless, but before I
noticed the real performance problem I put them in.
(_dbus_string_validate_utf8): micro-optimize this thing a little
bit, though callgrind says it didn't help; then special-case
ascii, which did help a lot; then be sure we detect nul bytes as
invalid, which is a bugfix.
(align_length_then_lengthen): add some more _DBUS_UNLIKELY
superstition; use memset to nul the padding instead of a manual
loop.
(_dbus_string_get_length): inline this as a
macro; it showed up in the profile because it's used for loop
tests and so forth
2004-11-10 Colin Walters <walters@verbum.org>
* dbus/dbus-spawn.c (check_babysit_events): Handle EINTR,
for extra paranoia.
2004-11-09 Colin Walters <walters@verbum.org>
* dbus/dbus-string.c (_dbus_string_get_length): New
function, writes DBusString to C buffer.
* dbus/dbus-string.h: Prototype it.
* dbus/dbus-message.c (dbus_message_type_to_string): New
function, converts message type into C string.
* dbus/dbus-message.h: Prototype it.
* bus/selinux.c (bus_selinux_check): Take source pid,
target pid, and audit data. Pass audit data to
avc_has_perm.
(log_audit_callback): New function, appends extra
audit information.
(bus_selinux_allows_acquire_service): Also take
service name, add it to audit data.
(bus_selinux_allows_send): Also take message
type, interface, method member, error name,
and destination, and add them to audit data.
(log_cb): Initialize func_audit.
* bus/selinux.h (bus_selinux_allows_acquire_service)
(bus_selinux_allows_send): Update prototypes
* bus/services.c (bus_registry_acquire_service): Pass
service name to bus_selinux_allows_acquire_service.
* bus/bus.c (bus_context_check_security_policy): Pass
additional audit data. Move assignment of dest
to its own line.
2004-11-07 Colin Walters <walters@verbum.org>
* dbus/dbus-transport-unix.c (do_authentication): Always
initialize auth_completed.
2004-11-07 Colin Walters <walters@verbum.org>
* bus/bus.c (load_config): Break into three
separate functions: process_config_first_time_only,
process_config_every_time, and process_config_postinit.
(process_config_every_time): Move call of
bus_registry_set_service_context_table into
process_config_postinit.
(process_config_postinit): New function, does
any processing that needs to happen late
in initialization (and also on reload).
(bus_context_new): Instead of calling load_config,
open config parser here and call process_config_first_time_only
and process_config_every_time directly. Later, after
we have forked but before changing UID,
invoke bus_selinux_full_init, and then call
process_config_postinit.
(bus_context_reload_config): As in bus_context_new,
load parse file inside here, and call process_config_every_time
and process_config_postinit.
* bus/services.h, bus/services.c
(bus_registry_set_service_context_table): Rename
from bus_registry_set_sid_table. Take string hash from config
parser, and convert them here into SIDs.
* bus/config-parser.c (struct BusConfigParser): Have
config parser only store a mapping of service->context
string.
(merge_service_context_hash): New function.
(merge_included): Merge context string hashes instead
of using bus_selinux_id_table_union.
(bus_config_parser_new): Don't use bus_selinux_id_table_new;
simply create a new string hash.
(bus_config_parser_unref): Unref it.
(start_selinux_child): Simply insert strings into hash,
don't call bus_selinux_id_table_copy_over.
* bus/selinux.h, bus/selinux.c (bus_selinux_id_table_union)
(bus_selinux_id_table_copy_over): Delete.
2004-11-03 Colin Walters <walters@verbum.org>
* bus/selinux.c (bus_selinux_pre_init): Kill some unused
variables.
2004-11-03 Colin Walters <walters@verbum.org>
* bus/test-main.c (test_pre_hook): Fix test logic,
thanks Joerg Barfurth <Joerg.Barfurth@Sun.COM>.
2004-11-02 Colin Walters <walters@redhat.com>
* bus/selinux.c (bus_selinux_init): Split into two functions,
bus_selinux_pre_init and bus_selinux_post_init.
(bus_selinux_pre_init): Just determine whether SELinux is
enabled.
(bus_selinux_post_init): Do everything else.
* bus/main.c (main): Call bus_selinux_pre_init before parsing
config file, and bus_selinux_post_init after. This ensures that
we don't lose the policyreload notification thread that
bus_selinux_init created before forking previously.
* bus/test-main.c (test_pre_hook): Update for split.
2004-10-31 Owen Fraser-Green <owen@discobabe.net>
Patch from Johan Fischer <linux@fischaz.com>
* mono/doc/Makefile.am (install-data-local): Added directory
install for DESTDIR
2004-10-29 Colin Walters <walters@redhat.com>
* dbus/dbus-sysdeps.h (_dbus_become_daemon): Also take
parameter for fd to write pid to.
* dbus/dbus-sysdeps.c (_dbus_become_daemon): Implement it.
* bus/bus.c (bus_context_new): Pass print_pid_fd
to _dbus_become_daemon (bug #1720)
2004-10-29 Colin Walters <walters@redhat.com>
Patch from Ed Catmur <ed@catmur.co.uk>
* mono/doc/Makefile.am (install-data-local): Handle
DESTDIR.
2004-10-29 Colin Walters <walters@redhat.com>
* bus/.cvsignore, qt/.cvsignore: Update.
2004-10-29 Colin Walters <walters@redhat.com>
Patch from Kristof Vansant <de_lupus@pandora.be>
* configure.in: Detect Slackware.
* bus/Makefile.am (SCRIPT_IN_FILES): Add rc.messagebus.in.
* bus/rc.messagebus.in: New file.
2004-10-29 Colin Walters <walters@redhat.com>
* tools/dbus-monitor.c (filter_func): Return
DBUS_HANDLER_RESULT_HANDLED in filter function
for now. See:
http://freedesktop.org/pipermail/dbus/2004-August/001433.html
2004-10-29 Colin Walters <walters@redhat.com>
Patch from Matthew Rickard <mjricka@epoch.ncsc.mil>
* bus/services.c (bus_registry_acquire_service):
Correctly retrieve service name from DBusString
for printing.
2004-10-29 Colin Walters <walters@redhat.com>
* dbus/dbus-glib.h: Update documentation to not
refer to internal APIs.
2004-10-27 Joe Shaw <joeshaw@novell.com>
* mono/Arguments.cs (GetDBusTypeConstructor):
type.UnderlyingSystemType will return "System.Byte" if you do it
on "byte[]", which is not what we want. So check the type.IsArray
property and use System.Array instead.
2004-10-25 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-sysdeps.c (fill_user_info): On errors do not free
the DBusUserInfo structure since this is passed into the function.
This would cause a double free when the function that allocated
the structure would try to free it when an error occured.
* (bus/session.conf.in, bus/Makefile.am, dbus/configure.in):
use /usr/share/dbus-1/services instead of /usr/lib/dbus-1.0/services
for service activation to avoid 32bit/64bit parallel install issues
2004-10-21 Colin Walters <walters@verbum.org>
* AUTHORS: Fix my email address, the @gnu.org one
has been bouncing for some time. Also add J5.
2004-10-21 Colin Walters <walters@verbum.org>
* dbus/dbus-transport-unix.c (do_authentication): Return
authentication status to callers.
(unix_handle_watch): If we completed authentication this round,
don't do another read. Instead wait until the next iteration,
after we've read any pending data in the auth buffer.
(unix_do_iteration): Ditto.
(unix_handle_watch): Updated for new do_authentication prototype.
2004-10-18 Colin Walters <walters@verbum.org>
* bus/selinux.c (bus_selinux_enabled): Handle
--disable-selinux case.
2004-10-18 Colin Walters <walters@verbum.org>
* bus/selinux.h: Add bus_selinux_enabled.
* bus/selinux.c (bus_selinux_enabled): Implement it.
* bus/config-parser.c (struct include): Add
if_selinux_enabled member.
(start_busconfig_child): Parse if_selinux_enabled
attribute for include.
(bus_config_parser_content): Handle it.
* bus/session.conf.in, bus/system.conf.in: Add
inclusion of context mapping to default config files;
conditional on SELinux being enabled.
* doc/busconfig.dtd: Add to if_selinux_enabled to default DTD.
* test/data/invalid-config-files/badselinux-1.conf,
test/data/invalid-config-files/badselinux-2.conf:
Test files for bad syntax.
2004-10-17 Colin Walters <walters@verbum.org>
* dbus/dbus-memory.c (_dbus_initialize_malloc_debug, check_guards)
(dbus_malloc, dbus_malloc0, dbus_realloc): Fix up printf
format specifier mismatches.
2004-10-07 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-sysdeps.c (_dbus_file_get_contents): fix an incorrect
format string.
* glib/dbus-dbus-gmain.c (dbus_g_bus_get): do not mangle NULL
pointer (bug #1540, Leonardo Boiko).
2004-09-28 Jon Trowbridge <trow@ximian.com>
* mono/BusDriver.cs: Changed BusDriver struct to remove
the ServiceCreated and ServiceDeleted events and replace them
with the new ServiceOwnerChanged event.
* mono/example/BusListener.cs: Added a new example program,
which listens for and reports any ServiceOwnerChanged events
on the bus driver.
* mono/example/Makefile.am (DESTDIR): Build changes for the
new BusListener.cs example.
2004-09-27 Olivier Andrieu <oliv__a@users.sourceforge.net>
* bus/signals.c (bus_match_rule_parse): validate the components of
match rules (bug #1439).
* dbus/dbus-bus.c (dbus_bus_add_match): add a missing OOM test.
2004-09-24 Olivier Andrieu <oliv__a@users.sourceforge.net>
* doc/dbus-specification.xml: document ServiceOwnerChanged
signal.
* bus/driver.c, bus/driver.h, bus/services.c: Use
ServiceOwnerChanged signal instead of ServiceCreated and
ServiceDeleted.
* bus/dispatch.c: update testcase for the new signal.
2004-09-20 Jon Trowbridge <trow@ximian.com>
Patch from Nat Friedman <nat@novell.com>
* mono/Makefile.am: A number of small build fixes to allow "make
distcheck" to succeed.
* mono/example/Makefile.am: "make distcheck" fixes.
* mono/AssemblyInfo.cs.in: When signing the assembly, look for the
key in @srcdir@.
* test/Makefile.am: "make distcheck" fixes.
2004-09-17 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-sysdeps.c (_dbus_user_at_console): fix memleak in OOM.
* doc/busconfig.dtd: update the DTD for the at_console attribute.
* bus/driver.c (bus_driver_handle_hello): correctly handle Hello
messages after the first one (bug #1389).
* bus/dispatch.c (check_double_hello_message): add a test case for
the double hello message bug.
(check_existent_service_activation): fix check of spawning error.
2004-09-16 David Zeuthen <david@fubar.dk>
* python/dbus_bindings.pyx.in: Add support for int64 and uint64
2004-09-12 David Zeuthen <david@fubar.dk>
Patch from Kay Sievers <kay.sievers@vrfy.org>
* bus/bus.c (bus_context_new):
* bus/bus.h:
* bus/main.c (usage)
(main):
Add commandline option --nofork to override configuration file
setting.
2004-09-09 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-*.h: remove the ; after DBUS_(BEGIN|END)_DECLS. Some C
compilers don't like it (bug #974).
2004-09-04 Harald Fernengel <harry@kdevelop.org>
* qt/connection.*: Applied patch by Jérôme Lodewyck
<lodewyck@clipper.ens.fr> to integrate an existing
connection into the Qt eventloop
2004-08-30 Jon Trowbridge <trow@ximian.com>
* mono/BusDriver.cs: Added. This is a class for interacting with
the org.freedesktop.DBus service.
* mono/Message.cs: Added a mechanism to expose the message that is
currently being dispatched via the static Message.Current
property. Added Message.Sender and Message.Destination
properties.
* mono/Handler.cs: Expose the dispatched message via
Message.Current when handling method calls.
* mono/Service.cs: Expose the dispatched message via
Message.Current when handling signal emissions.
* mono/Connection.cs: Bind dbus_bus_get_base_service via the
Connection.BaseService property.
2004-08-28 Havoc Pennington <hp@redhat.com>
* dbus/dbus-userdb.c (_dbus_is_console_user): remove unused variable
More fixes from Steve Grubb
* dbus/dbus-sysdeps.c (_dbus_connect_tcp_socket): fix fd leak
(_dbus_listen_tcp_socket): fix fd leak
* dbus/dbus-spawn.c (read_pid, read_ints): move the "again:" for
EINTR to a bit lower in the code
2004-08-26 Jon Trowbridge <trow@ximian.com>
* bus/driver.c (bus_driver_handle_service_exists): Respond with
TRUE if we are inquiring about the existence of the built-in
org.freedesktop.DBus service.
2004-08-25 John Palmieri <johnp@redhat.com>
* bus/config-parser.c:
(struct PolicyType): Add POLICY_CONSOLE
(struct Element.d.policy): s/gid_or_uid/gid_uid_or_at_console
(start_busconfig_child): Sets up console element when
<policy at_console=""> is encountered in a policy file
(append_rule_from_element): Convert console elements to console
rules.
* bus/policy.c:
(bus_policy_create_client_policy): Add console rules to the client
policy based on if the client is at the console
(bus_policy_append_console_rule): New function for adding a
console rule to a policy
(bus_policy_merge): Handle console rule merging
* dbus/dbus-sysdeps.h: Added the DBUS_CONSOLE_DIR constant
where we check for console user files
* dbus/dbus-sysdeps.c:
(_dbus_file_exists): New function which checks if the given
file exists
(_dbus_user_at_console): New function which does the system
specific process of checking if the user is at the console
* dbus/dbus-userdb.c:
(_dbus_is_console_user): New function converts a UID to user name
and then calls the system specific _dbus_user_at_console to
see if the user is at the console and therefor a console user
2004-08-25 Olivier Andrieu <oliv__a@users.sourceforge.net>
* bus/config-parser.c (set_limit):
* bus/dbus-daemon-1.1.in:
* test/data/valid-config-files/many-rules.conf: set the
max_match_rules_per_connection limt from the config file.
* doc/busconfig.dtd: update the DTD.
* bus/driver.c: remove some unused variables.
2004-08-24 Mikael Hallendal <micke@imendio.com>
* dbus/dbus-glib-lowlevel.h: Removed dbus_bus_get_with_g_main since
it's been replaced by dbus_g_bus_get
2004-08-23 Colin Walters <walters@redhat.com>
Updated SELinux support from Matthew Rickard <mjricka@epoch.ncsc.mil>
* bus/selinux.h: Prototype bus_selinux_get_policy_root.
* bus/selinux.c: Create a thread for policy reload notification.
(bus_selinux_get_policy_root): Implement.
* bus/config-parser.c (start_busconfig_child)
(bus_config_parser_content): Support SELinux-root relative
inclusion.
* configure.in <HAVE_SELINUX>: Add -lpthread.
* bus/test-main.c (test_pre_hook, test_post_hook): New.
(test_post_hook): Move memory checking into here.
(test_pre_hook, test_post_hook): Move SELinux checks in
here, but conditional on a DBUS_TEST_SELINUX environment
variable. Unfortunately we can't run the SELinux checks
as a normal user, since they won't have any permissions
for /selinux. So this will have to be tested manually
for now, until we have virtualization for most of
libselinux.
2004-08-23 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.c (_dbus_change_identity): add setgroups() to
drop supplementary groups, suggested by Steve Grubb
2004-08-20 Colin Walters <walters@redhat.com>
* bus/config-parser.c (start_busconfig_child): Remove some unused
variables.
* bus/selinux.c (bus_selinux_id_table_insert): Avoid compiler
warning.
2004-08-17 Joe Shaw <joeshaw@novell.com>
* configure.in: If --enable-mono is passed in, if we can't find
mono error out.
* mono/Makefile.am: Use /gacutil to install assemblies into the
GAC and not /root.
2004-08-12 Havoc Pennington <hp@redhat.com>
* NEWS: update for 0.22
* configure.in: release 0.22
2004-08-11 Colin Walters <walters@redhat.com>
* tools/dbus-send.c (main, usage): Add --reply-timeout
argument.
2004-08-10 Olivier Andrieu <oliv__a@users.sourceforge.net>
* bus/bus.c (process_config_first_time_only): get rid of an unused
DBusError that was causing a memoy leak (bug #989).
* dbus/dbus-keyring.c, dbus/dbus-message.c:
fix compilation on Solaris/Forte C (bug #974)
* bus/main.c (main): plug two minuscule memleaks.
2004-08-10 Havoc Pennington <hp@redhat.com>
* doc/dbus-tutorial.xml: add some more info on GLib bindings
2004-08-09 Havoc Pennington <hp@redhat.com>
* COPYING: switch to Academic Free License version 2.1 instead of
2.0, to resolve complaints about patent termination clause.
2004-07-31 John (J5) Palmieri <johnp@redhat.com>
* README: added documentation for the --enable-python
configure switch.
2004-07-31 Olivier Andrieu <oliv__a@users.sourceforge.net>
* bus/config-parser.c (bus_config_parser_new): fix an invalid
_unref in the SELinux support.
* doc/busconfig.dtd: update DTD for SELinux support.
* bus/config-loader-libxml.c: fix error handler and parser
initialisation/cleanup. OOM test now works with libxml2 HEAD.
* configure.in: remove the warning about libxml2.
* dbus/dbus-bus.c: silence doxygen warning.
2004-07-31 Colin Walters <walters@redhat.com>
* configure.in: Move #error in SELinux check to its own line.
2004-07-31 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-internals.h (_DBUS_SET_OOM):
* bus/utils.h (BUS_SET_OOM): use dbus_error_set_const instead of
dbus_error_set.
* bus/dispatch.c (check_send_exit_to_service): fix the test case,
broken by the change in the _SET_OOM macros.
2004-07-31 Colin Walters <walters@redhat.com>
* bus/selinux.c <HAVE_SELINUX>: Include utils.h to get
BUS_SET_OOM.
2004-07-31 Colin Walters <walters@redhat.com>
* configure.in: Use AC_TRY_COMPILE instead of AC_EGREP_HEADER
to correctly detect DBUS__ACQUIRE_SVC. Also add an
AC_MSG_CHECKING.
2004-07-24 Havoc Pennington <hp@redhat.com>
SELinux support from Matthew Rickard <mjricka@epoch.ncsc.mil>
* bus/selinux.c, bus/selinux.h: new file encapsulating selinux
functionality
* configure.in: add --enable-selinux
* bus/policy.c (bus_policy_merge): add FIXME to a comment
* bus/main.c (main): initialize and shut down selinux
* bus/connection.c: store SELinux ID on each connection, to avoid
repeated getting of the string context and converting it into
an ID
* bus/bus.c (bus_context_get_policy): new accessor, though it
isn't used
(bus_context_check_security_policy): check whether the security
context of sender connection can send to the security context of
recipient connection
* bus/config-parser.c: add parsing for <selinux> and <associate>
* dbus/dbus-transport.c (_dbus_transport_get_unix_fd): to
implement dbus_connection_get_unix_fd()
* dbus/dbus-connection.c (dbus_connection_get_unix_fd): new
function, used by the selinux stuff
2004-07-29 Olivier Andrieu <oliv__a@users.sourceforge.net>
* bus/config-loader-libxml.c: complete the implementation of
libxml backend for config file loader. Doesn't work with full OOM
test yet.
* configure.in: change error when selecting libxml into a warning.
* test/data/invalid-config-files: add two non-well-formed XML
files.
* glib/Makefile.am: libdbus_gtool always uses expat, not libxml.
* dbus/dbus-transport-unix.c (unix_handle_watch): do not
disconnect in case of DBUS_WATCH_HANGUP, several do_reading() may
be necessary to read all the buffer. (bug #894)
* bus/activation.c (bus_activation_activate_service): fix a
potential assertion failure (bug #896). Small optimization in the
case of auto-activation messages.
* dbus/dbus-message.c (verify_test_message, _dbus_message_test):
add test case for byte-through-vararg bug (#901). patch by Kimmo
Hämäläinen.
2004-07-28 Anders Carlsson <andersca@gnome.org>
* python/dbus.py:
* python/dbus_bindings.pyx.in:
Add dbus.init_gthreads (), allow emit_signal to pass
arguments to the signal.
2004-07-24 Havoc Pennington <hp@redhat.com>
* AUTHORS: add some people, not really comprehensively, let me
know if I missed you
2004-07-24 Havoc Pennington <hp@redhat.com>
* Makefile.am (DIST_SUBDIRS): add DIST_SUBDIRS, problem solved by
Owen
* test/Makefile.am (DIST_SUBDIRS): here also
2004-07-22 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-sysdeps.c (fill_user_info): fix inexistent label name,
breaking build on Solaris, reported by Farhad Saberi on the ML.
* dbus/dbus-message.c (dbus_message_append_args_valist): fix the
va_arg invocation to account for integer promotion in the case of
DBUS_TYPE_BYTE (unsigned char is promoted to int). (bug #901)
* bus/services.c (bus_service_remove_owner): fix bug #902, use
_dbus_list_get_first_link, not _dbus_list_get_first.
* dbus/dbus-bus.c (dbus_bus_service_exists): plug a memory leak.
* dbus/dbus-object-tree.c (free_subtree_recurse): always null
handler functions so that the asserts in _dbus_object_subtree_unref
do not fail.
* dbus/dbus-transport-unix.c (do_reading):
_dbus_transport_queue_messages return value is of type
dbus_bool_t, not DBusDispatchStatus.
2004-07-19 David Zeuthen <david@fubar.dk>
* dbus/dbus-protocol.h: Add DBUS_ERROR_UNIX_PROCESS_ID_UNKNOWN
* bus/dispatch.c:
(check_get_connection_unix_user): Debug says GetProperty; but the
method is called GetConnectionUnixUser
(check_get_connection_unix_process_id): New function
(bus_dispatch_test): Actually call check_get_connection_unix_user();
also call check_get_connection_unix_process_id()
* bus/driver.c:
(bus_driver_handle_get_connection_unix_process_id): New function,
handles GetConnectionUnixProcessID on the org.freedesktop.DBus
interface
* dbus/dbus-auth.c:
(handle_server_data_external_mech): Set pid from the credentials
obtained from the socket
* dbus/dbus-connection.c:
(dbus_connection_get_unix_process_id): New function
* dbus/dbus-connection.h:
Add prototype for dbus_connection_get_unix_process_id
* dbus/dbus-transport.c:
(_dbus_transport_get_unix_process_id): New function
* dbus/dbus-transport.h:
Add prototype for _dbus_transport_get_unix_process_id
2004-07-19 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-message.c: Message counter fix, patch by Christian
Hammond <chipx86@gnupdate.org>
2004-07-18 Seth Nickell <seth@gnome.org>
* python/dbus.py:
* python/dbus_bindings.pyx.in:
* python/tests/test-client.py:
Add dbus.ByteArray and dbus_bindings.ByteArray
types so that byte streams can be passed back.
Give jdahlin the heaps of credit that are so
rightfully his.
2004-07-12 Seth Nickell <seth@gnome.org>
* python/dbus.py:
Add message argument to the default object_method_handler
function.
* python/dbus_bindings.pyx.in:
Automatically return NIL when passed an empty list
(we can't pass back a list since lists are typed
and we don't have any idea what type the the client
intended the list to be... :-( )
2004-07-10 Seth Nickell <seth@gnome.org>
* python/examples/Makefile.am:
Fix distcheck breakage caused by new examples.
2004-07-10 Seth Nickell <seth@gnome.org>
* python/dbus.py:
Add "message" argument to service-side dbus.Object
methods. This will break existing services written
using the python bindings, but will allow extraction
of all the message information (e.g. who its from).
Add improved "object oriented" signal handling/emission.
* python/examples/example-service.py:
Nix this example.
* python/examples/example-signal-emitter.py:
* python/examples/example-signal-recipient.py:
Two new examples that show how to emit and receive
signals using the new APIs.
* python/examples/example-signals.py:
* python/examples/gconf-proxy-service.py:
* python/examples/gconf-proxy-service2.py:
Add "message" argument to service methods.
2004-06-28 Kay Sievers <kay.sievers@vrfy.org>
* bus/driver.c (bus_driver_handle_get_connection_unix_user)
* dbus/bus.c (dbus_bus_get_unix_user)
* doc/dbus-specification.xml: implement GetConnectionUnixUser
method of org.freedesktop.DBus interface.
* bus/dispatch.c: test case
2004-06-23 John (J5) Palmieri <johnp@redhat.com>
* python/Makefile.am: switched include directory from glib/ to dbus/
since dbus-glib.h moved
2004-06-22 Olivier Andrieu <oliv__a@users.sourceforge.net>
* configure.in: prevent building the gcj stuff and libxml loader
since they are broken.
2004-06-20 Havoc Pennington <hp@redhat.com>
* dbus/dbus-glib-error-enum.h: autogenerate the GError enum
codes from the dbus error names
* glib/dbus-glib.h: move to subdir dbus/ since it's included
as dbus/dbus-glib.h and that breakage is now visible due to
including dbus/dbus-glib.h in dbus-glib-lowlevel.h
* glib/dbus-glib.h: s/gproxy/g_proxy/
* dbus/dbus-shared.h: new header to hold stuff shared with
binding APIs
* dbus/dbus-protocol.h (DBUS_ERROR_*): move errors here rather
than dbus-errors.h
* glib/dbus-glib.h (dbus_set_g_error): move to
dbus-glib-lowlevel.h
* glib/dbus-glib.h: remove dbus/dbus.h from here; change a bunch
of stuff to enable this
* dbus/dbus-glib-lowlevel.h: put dbus/dbus.h here
* a bunch of other changes with the same basic "separate glib
bindings from dbus.h" theme
2004-06-10 Owen Fraser-Green <owen@discobabe.net>
* dbus-sharp.pc.in: Removed glib-sharp inclusion in Libs.
* python/examples/Makefile.am: Fixed typo in EXTRA_DIST.
2004-06-09 Olivier Andrieu <oliv__a@users.sourceforge.net>
* bus/driver.c, dbus/dbus-bus.c: use BOOLEAN instead of UINT32 for
the reply value of the ServiceExists message.
2004-06-07 John (J5) Palmieri <johnp@redhat.com>
* python/dbus_bindings.pyx.in: No longer need to parse path
elements and pass them as arrays of strings. The C API now
accepts plain path strings.
(_build_parsed_path): removed
2004-06-07 Havoc Pennington <hp@redhat.com>
* doc/TODO: remove auto-activation item since it's done; sort
items by importance/milestone
2004-06-07 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message-builder.c (_dbus_message_data_load): append
random signature when using REQUIRED_FIELDS (this hack won't work
in the long term)
* dbus/dbus-message.c: change the signature to be a header field,
instead of message->signature special-case string. Incremental
step forward. Then we can fix up code to send the signature in the
message, then fix up code to validate said signature, then fix up
code to not put the typecodes inline, etc.
(load_one_message): don't make up the signature after the fact
(decode_header_data): require signature field for the known
message types
* dbus/dbus-marshal.c (_dbus_marshal_string_len): new
* dbus/dbus-protocol.h: add DBUS_HEADER_FIELD_SIGNATURE
2004-06-07 Owen Fraser-Green <owen@discobabe.net>
* mono/DBusType/ObjectPath.cs: Renamed PathName argument to Path
* mono/Handler.cs: Updated to follow new path argument for
(un-)registering objects.
* mono/example/Makefile.am:
* mono/Makefile.am:
* configure.in: Bumped required version for mono and use new -pkg
syntax for deps
2004-06-05 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-connection.h, dbus/dbus-connection.c: have object path
registration functions take the path argument as char* instead of
char**.
* dbus/dbus-marshal.h, dbus/dbus-marshal.c (_dbus_decompose_path):
split off the path decompostion part of
_dbus_demarshal_object_path. Some misc. fixes to silence compiler
warnings.
* glib/dbus-gobject.c, test/test-service.c: update accordingly.
2004-06-02 Kristian Høgsberg <krh@redhat.com>
* dbus/dbus-auth.c: Rewrite auth protocol handling to use a state
machine approach. A state is implemented as a function that
handles incoming events as specified for that state.
* doc/dbus-specification.xml: Update auth protocol state machine
specification to match implementation. Remove some leftover
base64 examples.
2004-06-02 Kristian Høgsberg <krh@redhat.com>
* glib/dbus-gproxy.c, glib/dbus-gmain.c, dbus/dbus-string.c,
dbus/dbus-object-tree.c, dbus/dbus-message.c: add comments to
quiet doxygen.
* Doxyfile.in: remove deprecated options.
* dbus/dbus-message-handler.c, dbus/dbus-message-handler.h,
glib/test-thread.h, glib/test-thread-client.c,
glib/test-thread-server.c, glib/test-profile.c,
glib/test-dbus-glib.c: remove these unused files.
2004-06-01 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-object-tree.c
(_dbus_object_tree_dispatch_and_unlock): fix dispatch for
non-fallback handlers (bug #684).
(_dbus_object_subtree_new): initialize invoke_as_fallback field.
(find_subtree_recurse): report wether the returned subtree is an
exact match or a "fallback" match higher up in the tree.
(object_tree_test_iteration): update test case.
2004-06-01 Seth Nickell <seth@gnome.org>
* python/dbus_bindings.pyx.in:
* python/tests/test-client.py:
Round off basic type support. Add dicts (yay!), and
remaining array types.
Make MessageIter more general so it works for dicts too.
Mark all loop variables as C integers.
2004-05-31 Havoc Pennington <hp@redhat.com>
* glib/dbus-gidl.c (method_info_add_arg): keep args sorted with
"in" before "out"
* glib/dbus-gobject.c (dbus_type_to_string): move to dbus-gutils.c
* glib/dbus-glib-tool.c (main): set up to have a --self-test
option that runs the tests, and start filling in some code
including for starters just dumping the interfaces to stdout
* glib/Makefile.am (INCLUDES): define DBUS_LOCALEDIR
* test/data/valid-introspection-files/lots-of-types.xml: test of
an example introspection file
* glib/dbus-gparser.c (parser_check_doctype): doctype should be
"node" (I think...)
2004-05-31 Seth Nickell <seth@gnome.org>
* python/dbus_bindings.pyx.in:
* python/tests/test-client.py:
Test Suite: 1
Python Bindings: 0
Fix string array memory trashing bug... oops...
2004-05-30 Seth Nickell <seth@gnome.org>
* python/dbus.py:
Add a nicer-but-less-flexible alternate API for handling
calls to virtual objects in dbus.ObjectTree.
Screw up the argument order to the dbus.Object constructor
for consistency with dbus.ObjectTree (and to make dbus_methods
optional for future extension)
* python/examples/Makefile.am:
* python/examples/gconf-proxy-service.py:
* python/examples/gconf-proxy-service2.py:
Alternate implementation of gconf-proxy-service using the
nicer dbus.ObjectTree API.
* python/examples/example-service.py:
* python/tests/test-server.py
Reverse the argument order to deal with dbus.Object constructor
changes.
2004-05-30 Seth Nickell <seth@gnome.org>
* python/examples/example-client.py:
* python/examples/example-service.py:
Take it back. Lists seem to work but they're broken
in the test suite. Make the base examples use
lists (works fine).
2004-05-30 Seth Nickell <seth@gnome.org>
* python/dbus_bindings.pyx.in:
* python/tests/test-client.py:
Add some more tests and fix errors that crop up.
Unfortunately, currently it seems like marshalling
and unmarshalling of lists is completely broken :-(
2004-05-30 Seth Nickell <seth@gnome.org>
* python/dbus_bindings.pyx.in:
Add support for ObjectPath type.
* python/dbus.py:
Refactor message handling code to a common function.
* python/tests/test-client.py:
* python/tests/test-server.py:
Add tests that check to make sure values of all types
can be echoed from a service w/o mangling.
2004-05-29 Seth Nickell <seth@gnome.org>
* python/dbus.py:
Add ObjectTree class which allows implementation
of trees of "virtual" objects. Basically the python
wrapper for "register_fallback".
* python/examples/Makefile.am
* python/examples/gconf-proxy-client.py:
* python/examples/gconf-proxy-service.py:
Implement a simple GConf proxy service that supports
get/set on string and int GConf keys using the ObjectTree.
2004-05-29 Seth Nickell <seth@gnome.org>
* python/dbus.py:
* python/examples/example-client.py:
* python/examples/example-service.py:
* python/examples/list-system-services.py:
Add SessionBus, SystemBus and ActivationBus classes
so you don't need to know the special little BUS_TYPE
flag.
2004-05-29 Havoc Pennington <hp@redhat.com>
* bus/config-parser.c (process_test_valid_subdir): temporarily
stop testing config parser OOM handling, since expat has issues
http://freedesktop.org/pipermail/dbus/2004-May/001153.html
* bus/dbus-daemon-1.1.in: change requested_reply to
send_requested_reply/receive_requested_reply so we can send the
replies, not just receive them.
* bus/config-parser.c: parse the new
send_requested_reply/receive_requested_reply
* bus/policy.c (bus_client_policy_check_can_send): add
requested_reply argument and use it
* bus/bus.c (bus_context_check_security_policy): pass through
requested_reply status to message send check
* bus/system.conf.in: adapt to requested_reply change
2004-05-28 Havoc Pennington <hp@redhat.com>
* test/glib/test-service-glib.c (main): remove unused variable
* glib/dbus-gidl.c (base_info_ref): fix a silly compiler warning
* dbus/dbus-auth.h (enum): remove AUTHENTICATED_WITH_UNUSED_BYTES
from the enum, no longer in use.
* dbus/dbus-sysdeps.h: include config.h so DBUS_VA_COPY actually
works right.
* dbus/dbus-message.c: add various _dbus_return_val_if_fail for
whether error_name passed in is a valid error name.
2004-05-28 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-message.c (dbus_message_get_args): Added support for
OBJECT_PATH and OBJECT_PATH_ARRAY
2004-05-28 Seth Nickell <seth@gnome.org>
* python/examples/Makefile.am:
Forget to add Makefile.am. Do not pass go.
2004-05-28 Michael Meeks <michael@ximian.com>
* glib/dbus-gvalue.c (dbus_gvalue_marshal, dbus_gvalue_demarshal):
fix no int64 case.
* dbus/dbus-string.c (_dbus_string_parse_basic_type): impl.
* dbus/dbus-message.c (_dbus_message_iter_get_basic_type),
(_dbus_message_iter_get_basic_type_array): impl.
drastically simplify ~all relevant _get methods to use these.
(_dbus_message_iter_append_basic_array),
(dbus_message_iter_append_basic): impl
drastically simplify ~all relevant _append methods to use these.
* dbus/dbus-message-builder.c (parse_basic_type)
(parse_basic_array, lookup_basic_type): impl.
(_dbus_message_data_load): prune scads of duplicate /
cut & paste coding.
* dbus/dbus-marshal.c (_dbus_demarshal_basic_type_array)
(_dbus_demarshal_basic_type): implement,
(demarshal_and_validate_len/arg): beef up debug.
(_dbus_marshal_basic_type, _dbus_marshal_basic_type_array): impl.
2004-05-27 Seth Nickell <seth@gnome.org>
* configure.in:
* python/Makefile.am:
Include the example python apps in the tarball.
* python/examples/list-system-services.py
Add a python new example that fetches the list of services
from the system bus.
2004-05-27 Seth Nickell <seth@gnome.org>
* python/dbus.py:
* python/dbus_bindings.pyx.in:
Fix failure to notify that a signal was not handled,
resulted in hung functions.
2004-05-25 Colin Walters <walters@redhat.com>
* tools/dbus-monitor.c (main): Monitor all types of messages.
2004-05-23 Owen Fraser-Green <owen@discobabe.net>
* mono/Handler.cs, mono/Service.cs: Added UnregisterObject method
which unregisters the object path and disposes the handler.
2004-05-23 Kristian Høgsberg <krh@redhat.com>
Patch from Timo Teräs <ext-timo.teras@nokia.com> (#614):
* dbus/dbus-message.c (dbus_message_iter_get_args_valist): Swap
operands to && so we call dbus_message_iter_next () for the last
argument also.
2004-05-21 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-object-tree.c
(_dbus_object_tree_list_registered_unlock, lookup_subtree): return
children even if the requested path isn't registered.
(object_tree_test_iteration): test object_tree_list_registered.
* configure.in: undefine HAVE_ABSTRACT_SOCKETS instead of defining
it to 0.
2004-05-20 Kristian Høgsberg <krh@redhat.com>
* doc/TODO: Remove resolved items.
* bus/expirelist.h (struct BusExpireList): remove unused n_items
field.
* bus/connection.c (bus_connections_expect_reply): Enforce the
per-connection limit on pending replies.
Patch from Jon Trowbridge <trow@ximian.com>:
* bus/main.c (setup_reload_pipe): Added. Creates a pipe and sets
up a watch that triggers a config reload when one end of the pipe
becomes readable.
(signal_handler): Instead of doing the config reload in our SIGHUP
handler, just write to the reload pipe and let the associated
watch handle the reload when control returns to the main loop.
* bus/driver.c (bus_driver_handle_reload_config): Added.
Implements a ReloadConfig method for requesting a configuration
file reload via the bus driver.
2004-05-19 Owen Fraser-Green <owen@discobabe.net>
* HACKING: Updated release instructions concerning the wiki page.
2004-05-18 Kristian Høgsberg <krh@redhat.com>
* dbus/dbus-auth.c (client_try_next_mechanism): Remove logic to
filter against auth->allowed_mechs; we only add allowed mechs in
record_mechanisms().
* dbus/dbus-auth-script.c (_dbus_auth_script_run): Add an
ALLOWED_MECHS to auth-script format so we can set the list of
allowed mechanisms.
* data/auth/client-out-of-mechanisms.auth-script: New test to
check client disconnects when it is out of mechanisms to try.
* dbus/dbus-auth.c (process_command): Remove check for lines
longer that 1 MB; we only buffer up maximum 16 kB.
* dbus/dbus-transport.c, dbus/dbus-transport-unix.c,
dbus/dbus-auth-script.c, dbus/dbus-auth.c, dbus/dbus-auth.h:
Remove auth state AUTHENTICATED_WITH_UNUSED_BYTES, instead always
assume there might be unused bytes.
* dbus/dbus-auth.c (_dbus_auth_do_work): Remove check for
client-out-of-mechs, it is handled in process_reject(). Move check
for max failures to send_rejected(), as it's a server-only thing.
* dbus/dbus-auth.c: Factor out protocol reply code into functions
send_auth(), send_data(), send_rejected(), send_error(),
send_ok(), send_begin() and send_cancel().
2004-05-17 Kristian Høgsberg <krh@redhat.com>
Remove base64 encoding, replace with hex encoding. Original patch
from trow@ximian.com, added error handling.
* dbus/dbus-string.c (_dbus_string_base64_encode)
(_dbus_string_base64_decode): Remove.
(_dbus_string_hex_decode): Add end_return argument so we can
distinguish between OOM and invalid hex encoding.
(_dbus_string_test): Remove base64 tests and add test case for
invalid hex.
* dbus/dbus-keyring.c, dbus/dbus-auth-script.c, dbus/dbus-auth.c:
Replace base64 with hex.
* test/data/auth/invalid-hex-encoding.auth-script: New test case
for invalid hex encoded data in auth protocol.
2004-05-17 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-connection.c (check_for_reply_unlocked): plug a memory
leak.
2004-05-15 Owen Fraser-Green <owen@discobabe.net>
* mono/dbus-sharp.dll.config.in: Added for GAC
* mono/dbus-sharp.snk: Added for GAC
* mono/Assembly.cs.in: Added for GAC
* mono/Makefile.am: Changes for GAC installation
* configure.in: Added refs for dbus-sharp.dll.config.in and
Assembly.cs.in. More fixes for mono testing
* mono/example/Makefile.am: Changed var to CSC
* Makefile.am: Changed flag name to DBUS_USE_CSC
2004-05-15 Owen Fraser-Green <owen@discobabe.net>
* mono/Makefile.am: Added SUBDIRS for docs. Changed SUBDIRS order
* mono/doc/*: Added documentation framework
* configure.in: Added monodoc check
* README: Added description of mono configure flags
2004-05-11 John (J5) Palmieri <johnp@redhat.com>:
* doc/dbus-specification.xml: Added a "Required" column to the
header fields table and changed the "zero or more" verbage in
the above paragraph to read "The header must contain the required
named header fields and zero or more of the optional named header
fields".
* test/data/invalid-messages/*.message: Added the required PATH
named header field to the tests so that they don't fail on
'Missing path field'
2004-05-07 John (J5) Palmieri <johnp@redhat.com>
* python/dbus-bindings.pyx.in: Stopped the bindings from trashing
the stack by implicitly defining variable and parameter types and
removing the hack of defining C pointers as python objects and later
casting them.
2004-05-02 Owen Fraser-Green <owen@discobabe.net>
* mono/Makefile.am: Removed test-dbus-sharp.exe from all target
2004-05-01 Owen Fraser-Green <owen@discobabe.net>
* mono/DBusType/Dict.cs: Handle empty dicts
* mono/DBusType/Array.cs: Handle empty arrays
* mono/Arguments.cs: Handle empty arguments
2004-04-30 Owen Fraser-Green <owen@discobabe.net>
* dbus-sharp.pc.in: Modified to include include Libs and Requires
field
2004-04-25 Kristian Høgsberg <krh@redhat.com>
* test/data/valid-messages/standard-*.message: Update message
test scripts to new header field names.
2004-04-22 John (J5) Palmieri <johnp@redhat.com>
* test/break-loader.c (randomly_do_n_things): tracked down buffer
overflow to times_we_did_each_thing array which would chop off the
first character of the failure_dir string. Increased the size of
the array to 7 to reflect the number of random mutation functions
we have.
2004-04-21 Kristian Høgsberg <krh@redhat.com>
* dbus/dbus-server-unix.c (unix_finalize): Don't unref
unix_server->watch here, it is unreffed in disconnect.
(_dbus_server_new_for_tcp_socket): convert NULL host to
"localhost" here so we don't append NULL to address.
* dbus/dbus-server.c (_dbus_server_test): Add test case for
various addresses, including tcp with no explicit host.
2004-04-21 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-message.c (decode_header_data, decode_string_field):
fix incorrect setting of .name_offset in the HeaderField (it was
off by two bytes, positioned right after the name and typecode)
* bus/bus.c (bus_context_new, bus_context_unref): test before
calling dbus_server_free_data_slot and _dbus_user_database_unref
in case of an error.
* tools/Makefile.am: add $(DBUS_GLIB_TOOL_LIBS), xml libs needed
by libdbus-gtool.
2004-04-19 Kristian Høgsberg <krh@redhat.com>
* dbus/dbus-transport-unix.c (unix_do_iteration): Rewrite to use
_dbus_poll() instead of select().
2004-04-15 Jon Trowbridge <trow@ximian.com>
* bus/main.c (signal_handler): Reload the configuration files
on SIGHUP.
(main): Set up our SIGHUP handler.
* bus/bus.c (struct BusContext): Store the config file, user and
fork flag in the BusContext.
(process_config_first_time_only): Added. Contains the code
(previously in bus_context_new) for setting up the BusContext from
the BusConfigParser that should only be run the first time the
config files are read.
(process_config_every_time): Added. Contains the code (previously
in bus_context_new) for setting up the BusContext from the
BusConfigParser that should be run every time the config files are
read.
(load_config): Added. Builds a BusConfigParser from the config
files and passes the resulting structure off to
process_config_first_time_only (assuming this is the first time)
and process_config_every_time.
(bus_context_new): All of the config-related code has been moved
to process_config_first_time_only and process_config_every_time.
Now this function just does the non-config-related initializations
and calls load_config.
(bus_context_reload_config): Added.
2004-04-15 Olivier Andrieu <oliv__a@users.sourceforge.net>
* bus/driver.c (bus_driver_handle_get_service_owner):
implement a GetServiceOwner method.
* doc/dbus-specification.xml: document it.
* dbus/dbus-errors.h: add a 'ServiceHasNoOwner' error.
* glib/dbus-gproxy.c (dbus_gproxy_new_for_service_owner):
implement, using the bus GetServiceOwner method.
* test/glib/test-dbus-glib.c:
use dbus_gproxy_new_for_service_owner so that we can receive the
signal.
2004-04-15 John (J5) Palmieri <johnp@redhat.com>
* dbus/dbus-internals.c, dbus/dbus-message-builder.c,
dbus/dbus-message.c, dbus/dbus-protocol.h
(DBUS_HEADER_FIELD_SERVICE): renamed DBUS_HEADER_FIELD_DESTINATION
* dbus/dbus-internals.c, dbus/dbus-message-builder.c,
dbus/dbus-message.c, dbus/dbus-protocol.h
(DBUS_HEADER_FIELD_SENDER_SERVICE): renamed DBUS_HEADER_FIELD_SENDER
* dbus/dbus-internals.c (_dbus_header_field_to_string):
DBUS_HEADER_FIELD_DESTINATION resolves to "destination"
DBUS_HEADER_FIELD_SENDER resolves to "sender"
* doc/dbus-specification.xml (Header Fields Table):
s/SERVICE/DESTINATION
s/SENDER_SERVICE/SENDER
2004-04-14 Olivier Andrieu <oliv__a@users.sourceforge.net>
* test/glib/test-dbus-glib.c (timed_exit): fail the test after
a few seconds.
2004-04-13 Michael Meeks <michael@ximian.com>
* glib/dbus-gobject.c (handle_introspect): split out
(introspect_properties): this.
(handle_introspect): implement this.
* test/glib/Makefile.am: use the absolute path so the bus
daemon's chdir ("/") doesn't kill us dead.
* configure.in: subst ABSOLUTE_TOP_BUILDDIR
2004-04-12 Jon Trowbridge <trow@ximian.com>
* bus/config-parser.c (struct BusConfigParser): Added
included_files field.
(seen_include): Added. Checks whether or not a file has already
been included by any parent BusConfigParser.
(bus_config_parser_new): Copy the parent's included_files.
(include_file): Track which files have been included, and fail on
circular inclusions.
(process_test_valid_subdir): Changed printf to report if we are
testing valid or invalid conf files.
(all_are_equiv): Changed printf to be a bit clearer about
what we are actually doing.
(bus_config_parser_test): Test invalid configuration files.
2004-04-09 Jon Trowbridge <trow@ximian.com>
* bus/config-parser.c (bus_config_parser_new): Added a 'parent'
argument. If non-null, the newly-constructed BusConfigParser will
be initialized with the parent's BusLimits instead of the default
values.
(include_file): When including a config file, pass in
the current parser as the parent and then copy the BusLimits
from the included BusConfigParser pack to the current parser.
(process_test_valid_subdir): Renamed from process_test_subdir.
(process_test_equiv_subdir): Added. Walks through a directory,
descending into each subdirectory and loading the config files
it finds there. If any subdirectory contains two config files
that don't produce identical BusConfigParser structs, fail.
For now, the BusConfigParser's BusPolicies are not compared.
(bus_config_parser_test): Call both process_test_valid_subdir and
process_test_equiv_subdir.
* bus/config-loader-libxml.c (bus_config_load): Take a parent
argument and pass it along to the call to bus_config_parser_new.
Also made a few small changes to allow this code to compile.
* bus/config-loader-expat.c (bus_config_load): Take a parent
argument and pass it along to the call to bus_config_parser_new.
* bus/bus.c (bus_context_new): Load the config file
with a NULL parent argument.
2004-03-29 Michael Meeks <michael@ximian.com>
* glib/dbus-gobject.c (introspect_properties): split
out, fix mangled 'while' flow control.
(introspect_signals): implement.
(handle_introspect): update.
2004-03-29 Michael Meeks <michael@ximian.com>
* glib/dbus-gobject.c (set_object_property): split out /
re-work, use the property type, and not the message type(!)
(get_object_property): ditto.
* glib/dbus-gvalue.c (dbus_gvalue_demarshal),
(dbus_gvalue_marshal): make this code re-usable, needed
for signals too, also on both proxy and server side.
Re-write for more efficiency / readability.
2004-03-29 Michael Meeks <michael@ximian.com>
* dbus/dbus-message.c
(dbus_message_new_error_printf): impl.
* dbus/dbus-connection.c
(dbus_connection_unregister_object_path): fix warning.
* configure.in: fix no-mono-installed situation.
2004-03-27 Havoc Pennington <hp@redhat.com>
Patch from Timo Teräs:
* tools/dbus-send.c (main): if --print-reply, assume type is
method call; support boolean type args
* dbus/dbus-connection.c (dbus_connection_send_with_reply): fix a
bunch of memleak and logic bugs
2004-03-23 Owen Fraser-Green <owen@discobabe.net>
* mono/Arguments.cs:
* mono/Introspector.cs:
* mono/Handler.cs:
* mono/InterfaceProxy.cs:
* mono/Message.cs
* mono/ProxyBuilder.cs:
* mono/Service.cs:
Added InterfaceProxy class to avoid building proxies for every
object.
* dbus-message.h:
* dbus-message.c (dbus_message_append_args_valist)
(dbus_message_iter_get_object_path)
(dbus_message_iter_get_object_path_array)
(dbus_message_iter_append_object_path)
(dbus_message_iter_append_object_path_array):
Added object_path iter functions to handle OBJECT_PATH arguments
2004-03-23 Owen Fraser-Green <owen@discobabe.net>
First checkin of mono bindings.
* configure.in:
* Makefile.am:
Build stuff for the bindings
* dbus-sharp.pc.in: Added for pkgconfig
2004-03-21 Havoc Pennington <hp@redhat.com>
* test/test-service.c (main): remove debug spew
2004-03-21 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): accept empty
arrays
* dbus/dbus-message.h, bus/dbus-message.c (dbus_message_iter_init)
(dbus_message_iter_init_array_iterator)
(dbus_message_iter_init_dict_iterator): return a dbus_bool_t to
indicate whether the iterator is empty
* dbus/dbus-pending-call.c, dbus/dbus-server.c: silence compiler
warnings
2004-03-19 Havoc Pennington <hp@redhat.com>
* NEWS: 0.21 updates
* configure.in: 0.21
* doc/Makefile.am: add all XMLTO usage to DBUS_XML_DOCS_ENABLED
* python/Makefile.am: change to avoid dist of dbus_bindings.c so
you don't need pyrex to make dist
* qt/Makefile.am (libdbus_qt_1_la_SOURCES): add integrator.h to
sources; run moc
2004-03-18 Richard Hult <richard@imendio.com>
* dbus/dbus-message.c (dbus_message_get_auto_activation)
(dbus_message_set_auto_activation): Add doxygen docs.
2004-03-16 Richard Hult <richard@imendio.com>
* bus/activation.c: (bus_activation_service_created),
(bus_activation_send_pending_auto_activation_messages),
(bus_activation_activate_service):
* bus/activation.h:
* bus/dispatch.c: (bus_dispatch),
(check_nonexistent_service_auto_activation),
(check_service_auto_activated),
(check_segfault_service_auto_activation),
(check_existent_service_auto_activation), (bus_dispatch_test):
* bus/driver.c: (bus_driver_handle_activate_service):
* bus/services.c: (bus_registry_acquire_service):
* dbus/dbus-message.c: (dbus_message_set_auto_activation),
(dbus_message_get_auto_activation):
* dbus/dbus-message.h:
* dbus/dbus-protocol.h: Implement auto-activation.
* doc/dbus-specification.xml: Add auto-activation to the spec.
2004-03-12 Olivier Andrieu <oliv__a@users.sourceforge.net>
* dbus/dbus-marshal.c (_dbus_marshal_get_arg_end_pos):
fix a bug with CUSTOM types.
* dbus/dbus-message.c (message_iter_test, _dbus_message_test): add
a unit test for this bug (used to fail).
2004-03-12 Mikael Hallendal <micke@imendio.com>
* bus/activation.c:
(babysitter_watch_callback): notify all pending activations waiting for
the same exec that the activation failed.
(bus_activation_activate_service): shortcut the activation if we
already waiting for the same executable to start up.
2004-03-12 Mikael Hallendal <micke@imendio.com>
* bus/activation.c:
- Added service file reloading.
Each service files directory is kept in an hash table in
BusActivation and each BusActivationEntry knows what .service-file it
was read from. So when you try to activate a service the bus will
check if it's been updated, removed or if new .service-files has
been installed.
- Test code at the bottom for the service file reloading.
* bus/test-main.c: (main):
* bus/test.h:
- added service reloading test.
* dbus/dbus-sysdeps.c:
* dbus/dbus-sysdeps.h: (_dbus_delete_directory): Added.
2004-03-08 Michael Meeks <michael@ximian.com>
* dbus/dbus-connection.c (_dbus_connection_block_for_reply):
bail immediately if disconnected, to avoid busy loop.
* dbus/dbus-message.c (dbus_message_iter_get_args_valist):
cleanup cut/paste/inefficiency.
2004-03-01 David Zeuthen <david@fubar.dk>
* dbus/dbus-string.c (_dbus_string_append_printf_valist): Fix a
bug where args were used twice. This bug resulted in a segfault
on a Debian/PPC system when starting the messagebus daemon. Include
dbus-sysdeps.h for DBUS_VA_COPY
* dbus/dbus-sysdeps.h: Define DBUS_VA_COPY if neccessary. From GLib
* configure.in: Check for va_copy; define DBUS_VA_COPY to the
appropriate va_copy implementation. From GLib
2004-02-24 Joe Shaw <joe@ximian.com>
* bus/services.c (bus_registry_acquire_service): We need to pass
in the service name to dbus_set_error() to prevent a crash.
2003-12-26 Anders Carlsson <andersca@gnome.org>
* AUTHORS: Reveal my True identity.
2003-12-17 Mikael Hallendal <micke@imendio.com>
* dbus/dbus-message.c: (dbus_message_append_args_valist):
- Added case for DBUS_TYPE_BYTE, patch from Johan Hedberg.
2003-12-13 Mikael Hallendal <micke@imendio.com>
* doc/TODO: Added not about better error check of configuration files.
2003-12-02 Richard Hult <richard@imendio.com>
* Update AFL version to 2.0 throughout the source files to reflect
the update that was done a while ago.
2003-12-02 Richard Hult <richard@imendio.com>
* dbus/dbus-message.c (dbus_message_iter_append_dict): Set
wrote_dict_key to FALSE on the iter that the dict is appended to,
just like when appending other types. Fixes a bug where a dict
couldn't be put inside a dict.
(dbus_message_iter_append_dict_key): Fix typo in warning message.
(message_iter_test, _dbus_message_test): Add test case for dict
inside dict.
2003-12-01 David Zeuthen <david@fubar.dk>
* python/dbus.py: Add the actual message when calling the reciever
of a signal such that parameters can be inspected. Add the method
remove_signal_receiver
2003-11-26 Mikael Hallendal <micke@imendio.com>
* bus/*.[ch]:
* dbus/*.[ch]:
* glib/*.[ch]: Made ref functions return the pointer
2003-11-25 Zack Rusin <zack@kde.org>
* qt/integrator.h, qt/integrator.cpp: Adding handling of DBusServer,
* qt/server.h, qt/server.cpp, qt/Makefile.am: Adding DBusServer
wrappers,
* qt/connection.h, qt/connection.cpp: Adjusting to changes in
the Integrator and to better fit with the server,
2003-11-24 Zack Rusin <zack@kde.org>
* qt/connection.h, qt/connection.cpp: removing initDbus method since
the integrator handles it now
* qt/integrator.h, qt/integrator.cpp: reworking handling of timeouts,
since QTimer wasn't really meant to be used the way DBusTimeout is
2003-11-24 Zack Rusin <zack@kde.org>
* qt/integrator.h, qt/integrator.cpp, Makefile.am: Adding
Integrator class which integrates D-BUS with the Qt event loop,
* qt/connection.h, qt/connection.cpp: Move all the code which
was dealing with D-BUS integration to the Integrator class,
and start using Integrator,
2003-11-23 Zack Rusin <zack@kde.org>
* qt/connection.h, qt/connection.cpp: Adding the DBusConnection
wrapper
* qt/message.h, qt/message.cpp: updating to the current D-BUS api,
switching namespaces to DBusQt, reworking the class,
* Makefile.cvs: switching dependencies so that it matches KDE
schematics,
* qt/Makefile.am: adding connection.{h,cpp} and message.{h,cpp} to
the library
2003-11-19 Havoc Pennington <hp@redhat.com>
* NEWS: update
* configure.in: bump version to 0.20
* configure.in (have_qt): add yet another place to look for qt
(someone hand trolltech a .pc file...)
2003-11-01 Havoc Pennington <hp@redhat.com>
* doc/dbus-specification.xml: add state machine docs on the auth
protocol; just a first draft, I'm sure it's wrong.
2003-10-28 David Zeuthen <david@fubar.dk>
* python/dbus_bindings.pyx.in: add get_dict to handle dictionaries
return types. Fixup TYPE_* to reflect changes in dbus/dbus-protocol.h
2003-10-28 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.c (get_next_field): delete unused function
2003-10-28 Havoc Pennington <hp@redhat.com>
* bus/expirelist.c (do_expiration_with_current_time): detect
failure of the expire_func due to OOM
* bus/connection.c (bus_pending_reply_expired): return FALSE on OOM
* bus/dispatch.c (check_send_exit_to_service): fix to handle the
NoReply error that's now created by the bus when the service exits
2003-10-28 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.c (_dbus_message_test): enable and fix the
tests for set_path, set_interface, set_member, etc.
* dbus/dbus-string.c (_dbus_string_insert_bytes): allow 0 bytes
* dbus/dbus-message.c (set_string_field): always just delete and
re-append the field; accept NULL for deletion
(re_align_fields_recurse): reimplement
2003-10-26 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.c: fix docs to properly describe the
disconnected message
(_dbus_connection_notify_disconnected): remove this function;
we can't synchronously add the disconnected message, we have to
do it after we've queued any remaining real messages
(_dbus_connection_get_dispatch_status_unlocked): queue the
disconnect message only if the transport has finished queueing all
its real messages and is disconnected.
(dbus_connection_disconnect): update the dispatch status here
2003-10-22 Havoc Pennington <hp@redhat.com>
* bus/bus.c (bus_context_check_security_policy): fix up assertion
* bus/connection.c (bus_transaction_send_from_driver): set the
destination to the connection's base service
2003-10-20 Havoc Pennington <hp@redhat.com>
hmm, make check is currently not passing.
* doc/dbus-specification.xml: add requirement that custom type
names follow the same rules as interface names.
* dbus/dbus-protocol.h: change some of the byte codes, to avoid
duplication and allow 'c' to be 'custom'; dict is now 'm' for
'map'
* doc/dbus-specification.xml: update type codes to match
dbus-protocol.h, using the ASCII byte values. Rename type NAMED to
CUSTOM. Add type OBJECT_PATH to the spec.
2003-10-17 Havoc Pennington <hp@redhat.com>
* bus/driver.c (create_unique_client_name): use "." as separator
in base service names instead of '-'
* dbus/dbus-string.c (_dbus_string_get_byte): allow getting nul
byte at the end of the string
* dbus/dbus-internals.h (_DBUS_LIKELY, _DBUS_UNLIKELY): add
optimization macros since string validation seems to be a slow
point.
* doc/dbus-specification.xml: restrict valid
service/interface/member/error names. Add test suite code for the
name validation.
* dbus/dbus-string.c: limit service/interface/member/error names
to [0-9][A-Z][a-z]_
* dbus/dbus-connection.c (dbus_connection_dispatch): add missing
format arg to verbose spew
* glib/dbus-gproxy.c (dbus_gproxy_call_no_reply): if not out of
memory, return instead of g_error
* test/test-service.c (path_message_func): support emitting a
signal on request
* dbus/dbus-bus.c (init_connections_unlocked): only fill in
activation bus type if DBUS_BUS_ACTIVATION was set; default to
assuming the activation bus was the session bus so that services
started manually will still register.
(init_connections_unlocked): fix so that in OOM situation we get
the same semantics when retrying the function
* test/test-service.c (main): change to use path registration, to
test those codepaths; register with DBUS_BUS_ACTIVATION rather
than DBUS_BUS_SESSION
2003-10-16 Havoc Pennington <hp@redhat.com>
* glib/dbus-gtest-main.c: bracket with #ifdef DBUS_BUILD_TESTS
* Makefile.am (GCOV_DIRS): remove "test", we don't care about test
coverage of the tests
(coverage-report.txt): don't move the .da and .bbg files around
2003-10-16 Havoc Pennington <hp@redhat.com>
* bus/bus.c (struct BusContext): remove struct field I didn't mean
to put there
2003-10-16 Havoc Pennington <hp@redhat.com>
* bus/connection.c (bus_pending_reply_expired): either cancel or
execute, not both
(bus_connections_check_reply): use unlink, not remove_link, as we
don't want to free the link; fixes double free mess
* dbus/dbus-pending-call.c (dbus_pending_call_block): fix in case
where no reply was received
* dbus/dbus-connection.c (_dbus_pending_call_complete_and_unlock):
fix a refcount leak
* bus/signals.c (match_rule_matches): add special cases for the
bus driver, so you can match on sender/destination for it.
* dbus/dbus-sysdeps.c (_dbus_abort): print backtrace if
DBUS_PRINT_BACKTRACE is set
* dbus/dbus-internals.c: add pid to assertion failure messages
* dbus/dbus-connection.c: add message type code to the debug spew
* glib/dbus-gproxy.c (gproxy_get_match_rule): match rules want
sender=foo not service=foo
* dbus/dbus-bus.c (dbus_bus_get): if the activation bus is the
session bus but DBUS_SESSION_BUS_ADDRESS isn't set, use
DBUS_ACTIVATION_ADDRESS instead
* bus/activation.c: set DBUS_SESSION_BUS_ADDRESS,
DBUS_SYSTEM_BUS_ADDRESS if appropriate
* bus/bus.c (bus_context_new): handle OOM copying bus type into
context struct
* dbus/dbus-message.c (dbus_message_iter_get_object_path): new function
(dbus_message_iter_get_object_path_array): new function (half
finished, disabled for the moment)
* glib/dbus-gproxy.c (dbus_gproxy_end_call): properly handle
DBUS_MESSAGE_TYPE_ERROR
* tools/dbus-launch.c (babysit): support DBUS_DEBUG_OUTPUT to
avoid redirecting stderr to /dev/null
(babysit): close stdin if not doing the "exit_with_session" thing
* dbus/dbus-sysdeps.c (_dbus_become_daemon): delete some leftover
debug code; change DBUS_DEBUG_OUTPUT to only enable stderr, not
stdout/stdin, so things don't get confused
* bus/system.conf.in: fix to allow replies, I modified .conf
instead of .conf.in again.
2003-10-14 David Zeuthen <david@fubar.dk>
* python/dbus_bindings.pyx.in (MessageIter.get): fixed typo in
argtype to arg_type when raising unknown arg type exception.
Changed type list to reflect the changes in dbus-protocol.h so
the bindings actually work.
2003-10-14 Havoc Pennington <hp@redhat.com>
* test/decode-gcov.c: support gcc 3.3 also, though gcc 3.3 seems
to have a bug keeping it from outputting the .da files sometimes
(string_get_string): don't append garbage nul bytes to the string.
2003-10-15 Seth Nickell <seth@gnome.org>
* python/Makefile.am:
Include dbus_h_wrapper.h in the dist tarball.
2003-10-14 Havoc Pennington <hp@redhat.com>
* bus/bus.c (bus_context_check_security_policy): revamp this to
work more sanely with new policy-based requested reply setup
* bus/connection.c (bus_transaction_send_from_driver): set bus
driver messages as no reply
* bus/policy.c (bus_client_policy_check_can_receive): handle a
requested_reply attribute on allow/deny rules
* bus/system.conf: add <allow requested_reply="true"/>
* bus/driver.c (bus_driver_handle_message): fix check for replies
sent to the bus driver, which was backward. How did this ever work
at all though? I think I'm missing something.
* dbus/dbus-message.c (decode_header_data): require error and
method return messages to have a reply serial field to be valid
(_dbus_message_loader_queue_messages): break up this function;
validate that reply serial and plain serial are nonzero;
clean up the OOM/error handling.
(get_uint_field): don't return -1 from this
(dbus_message_create_header): fix signed/unsigned bug
* bus/connection.c (bus_connections_expect_reply): save serial of
the incoming message, not reply serial
2003-10-14 Havoc Pennington <hp@redhat.com>
* bus/connection.c: implement pending reply tracking using
BusExpireList
* bus/bus.c (bus_context_check_security_policy): verify that a
reply is pending in order to allow a reply to be sent. Deny
messages of unknown type.
* bus/dbus-daemon-1.1.in: update to mention new resource limits
* bus/bus.c (bus_context_get_max_replies_per_connection): new
(bus_context_get_reply_timeout): new
2003-10-13 Seth Nickell <seth@gnome.org>
* python/Makefile.am:
Pass "make distcheck": remove a couple files from DIST_FILES
that weren't included in the final version.
2003-10-12 Havoc Pennington <hp@pobox.com>
Added test code that 1) starts an actual bus daemon and 2) uses
DBusGProxy; fixed bugs that were revealed by the test. Lots
more testing possible, but this is the basic framework.
* glib/dbus-gproxy.c (dbus_gproxy_manager_unregister): remove
empty proxy lists from the proxy list hash
* dbus/dbus-message.c (dbus_message_iter_get_args_valist): add a
couple of return_if_fail checks
* dbus/dbus-pending-call.c (_dbus_pending_call_new): use dbus_new0
to allocate, so everything is cleared to NULL as it should be.
* glib/dbus-gmain.c (dbus_connection_setup_with_g_main): pass
source as data to dbus_connection_set_timeout_functions() as the
timeout functions expected
* test/glib/run-test.sh: add a little script to start up a message
bus and run tests using it
* tools/dbus-launch.1: updates
* tools/dbus-launch.c (main): add --config-file option
* tools/dbus-launch.c (main): remove confusing else if (runprog)
that could never be reached.
* dbus/dbus-message.c (dbus_message_new_method_return)
(dbus_message_new_error, dbus_message_new_signal): set the
no-reply-expected flag on all these. Redundant, but may
as well be consistent.
2003-10-11 Havoc Pennington <hp@pobox.com>
* test/decode-gcov.c (function_solve_graph): make broken block
graph a nonfatal error since it seems to be broken. Need to debug
this.
* dbus/dbus-marshal.c (_dbus_type_is_valid): new function since we
can't just check type > INVALID < LAST anymore
* dbus/dbus-message.c (dbus_message_get_signature): new function
(dbus_message_has_signature): new function
(struct DBusMessage): add signature field (right now it isn't sent
over the wire, just generated on the fly)
(dbus_message_copy): copy the signature, and init strings to
proper length to avoid some reallocs
(dbus_message_iter_init_array_iterator): return void, since it
can't fail
(dbus_message_iter_init_dict_iterator): return void since it can't fail
(_dbus_message_loader_queue_messages): add silly temporary hack to
fill in message->signature on load
* dbus/dbus-protocol.h: change DBUS_TYPE_* values to be ASCII
characters, so they are relatively human-readable.
2003-10-11 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c (_dbus_message_test): add more test
coverage, but #if 0 for now since they uncover a bug
not fixed yet; I think in re_align_field_recurse()
(re_align_field_recurse): add FIXME about broken assertion
* dbus/dbus-sysdeps.c (_dbus_sysdeps_test): add more test coverage
* bus/connection.c: share a couple code bits with expirelist.c
* bus/expirelist.h, bus/expirelist.c: implement a generic
expire-items-after-N-seconds facility, was going to share between
expiring connections and replies, decided not to use for expiring
connections for now.
* COPYING: include AFL 2.0 (still need to change all the file headers)
2003-10-09 Havoc Pennington <hp@redhat.com>
* configure.in: define DBUS_HAVE_GCC33_GCOV if we have
gcc 3.3. Not that we do anything about it yet.
* bus/signals.c (bus_match_rule_parse): impose max length on the
match rule text
* dbus/dbus-protocol.h: add DBUS_MAXIMUM_MATCH_RULE_LENGTH
2003-10-09 Havoc Pennington <hp@redhat.com>
Make matching rules theoretically work (add parser).
* bus/bus.c (bus_context_check_security_policy): fix up to handle
the case where destination is explicitly specified as bus driver
and someone else is eavesdropping.
* bus/policy.c (bus_client_policy_check_can_receive): fix up
definition of eavesdropping and assertion
* tools/dbus-send.c (main): use dbus_message_type_from_string
* bus/signals.c (bus_match_rule_parse): implement
* dbus/dbus-message.c (dbus_message_type_from_string): new
* dbus/dbus-errors.h (DBUS_ERROR_MATCH_RULE_INVALID): add
2003-10-02 Havoc Pennington <hp@pobox.com>
* glib/dbus-gproxy.c (dbus_gproxy_call_no_reply): rename from
dbus_gproxy_oneway_call
* glib/dbus-gmain.c (dbus_connection_setup_with_g_main)
(dbus_server_setup_with_g_main): fix to allow calling them more
than once on the same args
(dbus_bus_get_with_g_main): new function
2003-10-02 Havoc Pennington <hp@redhat.com>
* doc/dbus-tutorial.xml: write some stuff
2003-09-29 Havoc Pennington <hp@pobox.com>
* configure.in: split checks for Doxygen from XML docs, check for
xmlto
* doc/Makefile.am: XML-ify all the docs, and add a blank
dbus-tutorial.xml
2003-09-29 Havoc Pennington <hp@pobox.com>
* Merge dbus-object-names branch. To see the entire patch
do cvs diff -r DBUS_OBJECT_NAMES_BRANCHPOINT -r dbus-object-names,
it's huuuuge though.
To revert, I tagged DBUS_BEFORE_OBJECT_NAMES_MERGE.
2003-09-28 Havoc Pennington <hp@pobox.com>
* HACKING: update to reflect new server
2003-09-26 Seth Nickell <seth@gnome.org>
* python/dbus.py:
* python/examples/example-signals.py:
Start implementing some notions of signals. The API
is really terrible, but they sort of work (with the
exception of being able to filter by service, and to
transmit signals *as* a particular service). Need to
figure out how to make messages come from the service
we registered :-(
* python/dbus_bindings.pyx.in:
Removed duplicate message_handler callbacks.
2003-09-25 Havoc Pennington <hp@redhat.com>
* bus/session.conf.in: fix my mess
2003-09-25 Havoc Pennington <hp@pobox.com>
* bus/session.conf.in: fix security policy, reported by Seth Nickell
2003-09-25 Seth Nickell <seth@gnome.org>
* python/examples/example-service.py:
Johan notices complete wrong code in example-service, but
completely wrong in a way that works exactly the same (!).
Johan is confused, how could this possibly work? Example
code fails to serve purpose of making things clear.
Seth fixes.
2003-09-25 Mark McLoughlin <mark@skynet.ie>
* doc/dbus-specification.sgml: don't require header fields
to be 4-byte aligned and specify that fields should be
distinguished from padding by the fact that zero is not
a valid field name.
* doc/TODO: remove re-alignment item and add item to doc
the OBJECT_PATH type.
* dbus/dbus-message.c:
(HeaderField): rename the original member to value_offset
and introduce a name_offset member to keep track of where
the field actually begins.
(adjust_field_offsets): remove.
(append_int_field), (append_uint_field),
(append_string_field): don't align the start of the header
field to a 4-byte boundary.
(get_next_field): impl finding the next marhsalled field
after a given field.
(re_align_field_recurse): impl re-aligning a number of
already marshalled fields.
(delete_field): impl deleting a field of any type and
re-aligning any following fields.
(delete_int_or_uint_field), (delete_string_field): remove.
(set_int_field), (set_uint_field): no need to re-check
that we have the correct type for the field.
(set_string_field): ditto and impl re-aligning any
following fields.
(decode_header_data): update to take into account that
the fields aren't 4-byte aligned any more and the new
way to distinguish padding from header fields. Also,
don't exit when there is too much header padding.
(process_test_subdir): print the directory.
(_dbus_message_test): add test to make sure a following
field is re-aligned correctly after field deletion.
* dbus/dbus-string.[ch]:
(_dbus_string_insert_bytes): rename from insert_byte and
allow the insert of multiple bytes.
(_dbus_string_test): test inserting multiple bytes.
* dbus/dbus-marshal.c: (_dbus_marshal_set_string): add
warning note to docs about having to re-align any
marshalled values following the string.
* dbus/dbus-message-builder.c:
(append_string_field), (_dbus_message_data_load):
don't align the header field.
* dbus/dbus-auth.c: (process_test_subdir): print the
directory.
* test/break-loader.c: (randomly_add_one_byte): upd. for
insert_byte change.
* test/data/invalid-messages/bad-header-field-alignment.message:
new test case.
* test/data/valid-messages/unknown-header-field.message: shove
a dict in the unknown field.
2003-09-25 Seth Nickell <seth@gnome.org>
* python/dbus.py:
* python/dbus_bindings.pyx.in:
Handle return values.
* python/examples/example-client.py:
* python/examples/example-service.py:
Pass back return values from the service to the client.
2003-09-24 Seth Nickell <seth@gnome.org>
* python/dbus.py:
Connect Object methods (when you are sharing an object) up... pass
in a list of methods to be shared. Sharing all the methods just
worked out too weird. You can now create nice Services over the
DBus in Python. :-)
* python/dbus_bindings.pyx.in:
Keep references to user_data tuples passed into C functions so
Python doesn't garbage collect on us.
Implement MethodReturn and Error subclasses of Message for creating
DBusMessage's of those types.
* python/examples/example-client.py:
* python/examples/example-service.py:
Simple example code showing both how create DBus services and objects,
and how to use them.
2003-09-23 Havoc Pennington <hp@pobox.com>
* glib/dbus-gproxy.c (dbus_gproxy_manager_filter): implement
2003-09-23 Havoc Pennington <hp@redhat.com>
* glib/dbus-gproxy.c (dbus_gproxy_connect_signal): implement
(dbus_gproxy_disconnect_signal): implement
(dbus_gproxy_manager_remove_signal_match): implement
(dbus_gproxy_manager_add_signal_match): implement
(dbus_gproxy_oneway_call): implement
2003-09-23 Havoc Pennington <hp@pobox.com>
* glib/dbus-gproxy.c (struct DBusGProxy): convert to a GObject
subclass. This means dropping the transparent thread safety of the
proxy; you now need a separate proxy per-thread, or your own
locking on the proxy. Probably right anyway.
(dbus_gproxy_ref, dbus_gproxy_unref): nuke, just use g_object_ref
2003-09-22 Havoc Pennington <hp@redhat.com>
* glib/dbus-gproxy.c (dbus_gproxy_manager_get): implement
2003-09-21 Seth Nickell <seth@gnome.org>
First checkin of the Python bindings.
* python/.cvsignore:
* python/Makefile.am:
* python/dbus_bindings.pyx.in:
* python/dbus_h_wrapper.h:
Pieces for Pyrex to operate on, building a dbus_bindings.so
python module for low-level access to the DBus APIs.
* python/dbus.py:
High-level Python module for accessing DBus objects.
* configure.in:
* Makefile.am:
Build stuff for the python bindings.
* acinclude.m4:
Extra macro needed for finding the Python C header files.
2003-09-21 Havoc Pennington <hp@pobox.com>
* glib/dbus-gproxy.c (dbus_gproxy_manager_new): start
implementing the proxy manager, didn't get very far.
* dbus/dbus-bus.c (dbus_bus_add_match): new
(dbus_bus_remove_match): new
* glib/dbus-gproxy.c (dbus_gproxy_new_for_service): add a
path_name argument; adjust the other not-yet-implemented
gproxy constructors to be what I think they should be.
2003-09-21 Havoc Pennington <hp@pobox.com>
* dbus/dbus-bus.c (dbus_bus_get): set exit_on_disconnect to TRUE
by default for message bus connections.
* dbus/dbus-connection.c (dbus_connection_dispatch): exit if
exit_on_disconnect flag is set and we process the disconnected
signal.
(dbus_connection_set_exit_on_disconnect): new function
2003-09-21 Havoc Pennington <hp@pobox.com>
Get matching rules mostly working in the bus; only actually
parsing the rule text remains. However, the client side of
"signal connections" hasn't been started, this patch is only the
bus side.
* dbus/dispatch.c: fix for the matching rules changes
* bus/driver.c (bus_driver_handle_remove_match)
(bus_driver_handle_add_match): send an ack reply from these
method calls
* glib/dbus-gproxy.c (dbus_gproxy_begin_call): fix order of
arguments, reported by Seth Nickell
* bus/config-parser.c (append_rule_from_element): support
eavesdrop=true|false attribute on policies so match rules
can be prevented from snooping on the system bus.
* bus/dbus-daemon-1.1.in: consistently use terminology "sender"
and "destination" in attribute names; fix some docs bugs;
add eavesdrop=true|false attribute
* bus/driver.c (bus_driver_handle_add_match)
(bus_driver_handle_remove_match): handle AddMatch, RemoveMatch
messages
* dbus/dbus-protocol.h (DBUS_SERVICE_ORG_FREEDESKTOP_BROADCAST): get
rid of broadcast service concept, signals are just always broadcast
* bus/signals.c, bus/dispatch.c, bus/connection.c, bus/bus.c:
mostly implement matching rules stuff (currently only exposed as signal
connections)
2003-09-21 Mark McLoughlin <mark@skynet.ie>
* doc/dbus-specification.sgml: Change the header field name
to be an enum and update the rest of the spec to reference
the fields using the conventinal name.
* dbus/dbus-protocol.h: update to reflect the spec.
* doc/TODO: add item to remove the 4 byte alignment requirement.
* dbus/dbus-message.c: Remove the code to generalise the
header/body length and serial number header fields as named
header fields so we can reference field names using the
protocol values.
(append_int_field), (append_uint_field), (append_string_field):
Append the field name as a byte rather than four chars.
(delete_int_or_uint_field), (delete_string_field): reflect the
fact that the field name and typecode now occupy 4 bytes instead
of 8.
(decode_string_field), (decode_header_data): update to reflect
protocol changes and move the field specific encoding from
decode_string_field() back into decode_header_data().
* dbus/dbus-internals.[ch]: (_dbus_header_field_to_string):
Add utility to aid debugging.
* dbus/dbus-message-builder.c:
(append_string_field), (_dbus_message_data_load): Update to
reflect protocol changes; Change the FIELD_NAME directive
to HEADER_FIELD and allow it to take the field's conventional
name rather than the actual value.
* test/data/*/*.message: Update to use HEADER_FIELD instead
of FIELD_NAME; Always align the header on an 8 byte boundary
*before* updating the header length.
2003-09-15 Havoc Pennington <hp@pobox.com>
* dbus/dbus-pending-call.c: add the get/set object data
boilerplate as for DBusConnection, etc. Use generic object data
for the notify callback.
* glib/dbus-gparser.c (parse_node): parse child nodes
* tools/dbus-viewer.c: more hacking on the dbus-viewer
* glib/dbus-gutils.c (_dbus_gutils_split_path): add a file to
contain functions shared between the convenience lib and the
installed lib
* glib/Makefile.am (libdbus_glib_1_la_LDFLAGS): add
-export-symbols-regex to the GLib library
* dbus/dbus-object-tree.c (_dbus_object_tree_dispatch_and_unlock):
fix the locking in here, and add a default handler for
Introspect() that just returns sub-nodes.
2003-09-14 Havoc Pennington <hp@pobox.com>
* glib/dbus-gthread.c (dbus_g_thread_init): rename to make g_foo
rather than gfoo consistent
* glib/dbus-gproxy.h: delete for now, move contents to
dbus-glib.h, because the include files don't work right since we
aren't in the dbus/ subdir.
* glib/dbus-gproxy.c (dbus_gproxy_send): finish implementing
(dbus_gproxy_end_call): finish
(dbus_gproxy_begin_call): finish
* glib/dbus-gmain.c (dbus_set_g_error): new
* glib/dbus-gobject.c (handle_introspect): include information
about child nodes in the introspection
* dbus/dbus-connection.c (dbus_connection_list_registered): new
function to help in implementation of introspection
* dbus/dbus-object-tree.c
(_dbus_object_tree_list_registered_and_unlock): new function
2003-09-12 Havoc Pennington <hp@pobox.com>
* glib/dbus-gidl.h: add common base class for all the foo_info
types
* tools/dbus-viewer.c: add GTK-based introspection UI thingy
similar to kdcop
* test/Makefile.am: try test srcdir -ef . in addition to test
srcdir = ., one of them should work (yeah lame)
* glib/Makefile.am: build the "idl" parser stuff as a convenience
library
* glib/dbus-gparser.h: make description_load routines return
NodeInfo* not Parser*
* Makefile.am (SUBDIRS): build test dir after all library dirs
* configure.in: add GTK+ detection
2003-09-07 Havoc Pennington <hp@pobox.com>
* Make Doxygen contented.
2003-09-07 Havoc Pennington <hp@pobox.com>
* doc/dbus-specification.sgml: more updates
2003-09-06 Havoc Pennington <hp@pobox.com>
* doc/dbus-specification.sgml: partial updates
* bus/dbus-daemon-1.1.in: fix the config file docs for the
zillionth time; hopefully I edited the right file this time.
* bus/config-parser.c (append_rule_from_element): support
send_type, send_path, receive_type, receive_path
* bus/policy.c: add message type and path to the list of things
that can be "firewalled"
2003-09-06 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c (dbus_connection_register_fallback): add this
(dbus_connection_register_object_path): make this not handle
messages to paths below the given path
2003-09-03 Havoc Pennington <hp@pobox.com>
* test/glib/Makefile.am: add this with random glib-linked test
programs
* glib/Makefile.am: remove the random test programs from here,
leave only the unit tests
* glib/dbus-gobject.c (_dbus_gobject_test): add test for
uscore/javacaps conversion, and fix
(get_object_property, set_object_property): change to .NET
convention for mapping props to methods, set_FooBar/get_FooBar,
since one language has such a convention we may as well copy it.
Plus real methods in either getFooBar or get_foo_bar style won't
collide with this convention.
2003-09-01 Havoc Pennington <hp@pobox.com>
* glib/dbus-gparser.c: implement
* glib/dbus-gobject.c: start implementing skeletons support
* configure.in: when disabling checks/assert, also define
G_DISABLE_ASSERT and G_DISABLE_CHECKS
2003-09-01 Havoc Pennington <hp@pobox.com>
* glib/Makefile.am: rearrange a bunch of files and get "make
check" framework set up
2003-08-31 Havoc Pennington <hp@pobox.com>
* fix build with --disable-tests
2003-08-30 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c: purge DBusMessageHandler
* dbus/dbus-message-handler.c: remove DBusMessageHandler, just
use callbacks everywhere
2003-08-30 Havoc Pennington <hp@pobox.com>
* test/data/valid-config-files/system.d/test.conf: change to
root for the user so warnings don't get printed
* dbus/dbus-message.c: add dbus_message_get_path,
dbus_message_set_path
* dbus/dbus-object-tree.c (do_test_dispatch): add test of
dispatching to a path
* dbus/dbus-string.c (_dbus_string_validate_path): add
* dbus/dbus-marshal.c (_dbus_demarshal_object_path): implement
(_dbus_marshal_object_path): implement
* dbus/dbus-protocol.h (DBUS_HEADER_FIELD_PATH): new header field
to contain the path to the target object
(DBUS_HEADER_FIELD_SENDER_SERVICE): rename
DBUS_HEADER_FIELD_SENDER to explicitly say it's the sender service
2003-08-30 Havoc Pennington <hp@pobox.com>
* dbus/dbus-object-tree.c: write tests and fix the discovered bugs
2003-08-29 Havoc Pennington <hp@pobox.com>
* dbus/dbus-object-tree.c: modify to allow overlapping paths to be
registered
(struct DBusObjectSubtree): shrink this
a lot, since we may have a lot of them
(_dbus_object_tree_free_all_unlocked): implement
(_dbus_object_tree_dispatch_and_unlock): implement
2003-08-29 Havoc Pennington <hp@pobox.com>
* dbus/dbus-internals.h: fix _DBUS_N_GLOBAL_LOCKS
2003-08-28 Havoc Pennington <hp@pobox.com>
purge DBusObjectID
* dbus/dbus-connection.c: port to no ObjectID, create a
DBusObjectTree, rename ObjectTree to ObjectPath in public API
* dbus/dbus-connection.h (struct DBusObjectTreeVTable): delete
everything except UnregisterFunction and MessageFunction
* dbus/dbus-marshal.c: port away from DBusObjectID,
add DBUS_TYPE_OBJECT_PATH
* dbus/dbus-object-registry.[hc], dbus/dbus-object.[hc],
dbus/dbus-objectid.[hc]: remove these, we are moving to
path-based object IDs
2003-08-25 Havoc Pennington <hp@pobox.com>
Just noticed that dbus_message_test is hosed, I wonder when I
broke that. I thought make check was passing earlier...
* dbus/dbus-object-tree.c: add new "object tree" to match DCOP
container tree, will replace most of dbus-object-registry
* dbus/dbus-string.c (_dbus_string_append_printf_valist): fix C99
screwup
2003-08-19 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c (decode_string_field): support FIELD_SENDER
(dbus_message_is_error): fix this function
* bus/dbus-daemon-1.1: clarify logic on when <deny>/<allow> rules
match
* bus/policy.c (bus_client_policy_check_can_receive): fix code to
reflect clarified man page
(bus_client_policy_check_can_send): ditto
* bus/session.conf.in: fixup
* bus/system.conf.in: fixup
2003-08-18 Havoc Pennington <hp@redhat.com>
* dbus/dbus-hash.c (_dbus_hash_table_insert_two_strings): fix
* dbus/dbus-message.c (_dbus_message_loader_queue_messages): fix
dumb bug created earlier (wrong order of args to
decode_header_data())
* tools/dbus-send.c: port
* tools/dbus-print-message.c (print_message): port
* test/data/*messages: port all messages over
* dbus/dbus-message-builder.c: support including
message type
* bus/driver.c: port over
* bus/dispatch.c: port over to new stuff
* dbus/dbus-connection.c (_dbus_connection_new_for_transport):
rename disconnect signal to "Disconnected"
2003-08-17 Havoc Pennington <hp@pobox.com>
This doesn't compile yet, but syncing up so I can hack on it from
work. What are branches for if not broken code? ;-)
* dbus/dbus-protocol.h: remove DBUS_HEADER_FIELD_NAME, add
DBUS_HEADER_FIELD_INTERFACE, DBUS_HEADER_FIELD_MEMBER,
DBUS_HEADER_FIELD_ERROR_NAME
* dbus/dbus-hash.c: Introduce DBUS_HASH_TWO_STRINGS as hack to use
for the interface+member pairs
(string_hash): change to use g_str_hash algorithm
(find_direct_function, find_string_function): refactor these to
share most code.
* dbus/dbus-message.c: port all of this over to support
interface/member fields instead of name field
* dbus/dbus-object-registry.c: port over
* dbus/dbus-string.c (_dbus_string_validate_interface): rename
from _dbus_string_validate_name
* bus/dbus-daemon-1.1: change file format for the
<deny>/<allow> stuff to match new message naming scheme
* bus/policy.c: port over
* bus/config-parser.c: parse new format
2003-08-16 Havoc Pennington <hp@pobox.com>
* dbus/dbus-object-registry.c (add_and_remove_objects): remove
broken assertion
* glib/dbus-gproxy.c: some hacking
2003-08-15 Havoc Pennington <hp@redhat.com>
* dbus/dbus-pending-call.c (dbus_pending_call_block): implement
* dbus/dbus-connection.c
(dbus_connection_send_with_reply_and_block): factor out internals;
change to convert any error replies to DBusError instead of
returning them as a message
2003-08-15 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c,
dbus/dbus-pending-call.c: Finish the pending call stuff
2003-08-14 Havoc Pennington <hp@redhat.com>
* dbus/dbus-pending-call.c: start on new object that will replace
DBusMessageHandler and ReplyHandlerData for tracking outstanding
replies
* dbus/dbus-gproxy.c: start on proxy object used to communicate
with remote interfaces
* dbus/dbus-gidl.c: do the boring boilerplate in here
2003-08-12 Havoc Pennington <hp@pobox.com>
* bus/dispatch.c (bus_dispatch): make this return proper
DBusHandlerResult to avoid DBUS_ERROR_UNKNOWN_METHOD
* dbus/dbus-errors.c (dbus_set_error): use
_dbus_string_append_printf_valist
* dbus/dbus-string.c (_dbus_string_append_printf_valist)
(_dbus_string_append_printf): new
* dbus/dbus-errors.h (DBUS_ERROR_UNKNOWN_MESSAGE): change to
UNKNOWN_METHOD
* dbus/dbus-connection.c (dbus_connection_dispatch): handle
DBUS_HANDLER_RESULT_NEED_MEMORY; send default error reply if a
message is unhandled.
2003-08-11 Havoc Pennington <hp@pobox.com>
* bus/test.c (client_disconnect_handler): change to return
HANDLED (would have been REMOVE_MESSAGE)
* dbus/dbus-object.h (enum DBusHandlerResult): rename to
HANDLED/NOT_YET_HANDLED instead of
REMOVE_MESSAGE/ALLOW_MORE_HANDLERS to make it clearer how it
should be used.
2003-08-10 Havoc Pennington <hp@pobox.com>
* tools/dbus-send.c (main): add --type argument, for now
supporting only method_call and signal types.
* tools/dbus-print-message.c: print message type
* dbus/dbus-connection.c (_dbus_connection_new_for_transport):
init connection->objects
* doc/dbus-specification.sgml: fix sgml
* bus/*.c: port over to object-instance API changes
* test/test-service.c: ditto
* dbus/dbus-message.c (dbus_message_create_header): allow #NULL
name, we will have to fix up the rest of the code to also handle
this
(dbus_message_new): generic message-creation call
(set_string_field): allow appending name field
2003-08-06 Havoc Pennington <hp@pobox.com>
* dbus/dbus-object-registry.c: implement signal connection
and dispatch
* dbus/dbus-connection.c (_dbus_connection_unref_unlocked): new
* dbus/dbus-internals.c (_dbus_memdup): new function
2003-08-02 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c (dbus_message_get_no_reply)
(dbus_message_set_no_reply): add these and remove
set_is_error/get_is_error
* dbus/dbus-protocol.h, doc/dbus-specification.sgml:
remove the ERROR flag, since there's now an ERROR type
2003-08-01 Havoc Pennington <hp@pobox.com>
* dbus/dbus-object-registry.c (_dbus_object_registry_handle_and_unlock):
implement
* dbus/dbus-message.c (dbus_message_get_type): new function
* doc/dbus-specification.sgml: add "type" byte to messages
2003-08-01 Havoc Pennington <hp@pobox.com>
* dbus/dbus-protocol.h (DBUS_MESSAGE_TYPE_*): introduce
a message type enum to distinguish kinds of message
(DBUS_HEADER_FLAG_NO_REPLY_EXPECTED): flag for a message
that need not be replied to
2003-08-01 Havoc Pennington <hp@pobox.com>
* dbus/dbus-marshal.c: adapt to DBusObjectID changes
(unpack_8_octets): fix no-64-bit-int bug
* dbus/dbus-object-registry.c (validate_id): validate the
connection ID bits, not just the instance ID.
* dbus/dbus-connection.c (_dbus_connection_init_id): initialize
the connection-global 33 bits of the object ID
* dbus/dbus-object-registry.c (info_from_entry): fill in
object ID in the new way
* dbus/dbus-objectid.h: rather than high/low bits, specifically
define server/client/instance bits.
2003-07-30 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c (dbus_connection_register_object): fix
build
2003-07-13 Havoc Pennington <hp@pobox.com>
* dbus/dbus-object.h (struct DBusObjectVTable): add padding
fields to DBusObjectVTable and DBusObjectInfo
2003-07-12 Havoc Pennington <hp@pobox.com>
* dbus/dbus-object-registry.c: implement unit test,
fix bugs discovered in process
* dbus/dbus-connection.c: remove handler_table and
register_handler(), add DBusObjectRegistry usage
* dbus/dbus-objectid.c (dbus_object_id_is_null)
(dbus_object_id_set_null): new functions
2003-07-08 Havoc Pennington <hp@pobox.com>
* dbus/dbus-object.c: implement some of this
* dbus/dbus-object-registry.c
(_dbus_object_registry_add_and_unlock): fill in the object_id out
param
(_dbus_object_registry_new): handle OOM
2003-07-08 Havoc Pennington <hp@pobox.com>
* dbus/dbus-object.h: sketch out an API for registering objects
with a connection, that allows us to use as little as 24 bytes
per object and lets application code represent an object in
any conceivable way.
* dbus/dbus-object-registry.c: implement the hard bits of the
DBusConnection aspect of object API. Not yet wired up.
2003-07-06 Havoc Pennington <hp@pobox.com>
* dbus/dbus-marshal.c (_dbus_marshal_set_object_id): new function
(_dbus_marshal_object_id): new
(_dbus_demarshal_object_id): new
(_dbus_marshal_get_arg_end_pos): support object ID type, and
consolidate identical switch cases. Don't conditionalize handling
of DBUS_TYPE_UINT64, need to handle the type always.
(_dbus_marshal_validate_arg): consolidate identical cases, and
handle DBUS_TYPE_OBJECT_ID
* dbus/dbus-objectid.c: new file with DBusObjectID data type.
* dbus/dbus-protocol.h: add DBUS_TYPE_OBJECT_ID
2003-09-28 Havoc Pennington <hp@pobox.com>
* real 0.13 release
2003-09-28 Havoc Pennington <hp@pobox.com>
* doc/Makefile.am (dbus-specification.html): testing a funky hack
to work with Debian db2html
2003-09-28 Havoc Pennington <hp@pobox.com>
* configure.in: 0.13
* doc/Makefile.am (dbus-test-plan.html): accept nonexistence of
stylesheet-images for benefit of Debian
Change back to using filesystem-linked sockets for the system
bus, so only root can create the default system bus address.
* bus/system.conf.in: change to use
DBUS_SYSTEM_BUS_DEFAULT_ADDRESS
* dbus/Makefile.am (INCLUDES): remove DBUS_SYSTEM_BUS_PATH define
from here.
* configure.in: define DBUS_SYSTEM_BUS_DEFAULT_ADDRESS
here, and AC_DEFINE DBUS_SYSTEM_PATH
2003-08-09 Anders Carlsson <andersca@codefactory.se>
* doc/TODO:
* doc/busconfig.dtd:
Add busconfig DTD.
2003-08-09 Anders Carlsson <andersca@codefactory.se>
* doc/dbus-specification.sgml:
Add activation reply values.
2003-08-05 Havoc Pennington <hp@redhat.com>
* configure.in: 0.12
2003-08-05 Anders Carlsson <andersca@codefactory.se>
* glib/dbus-gmain.c: (watch_fd_new), (watch_fd_ref),
(watch_fd_unref), (dbus_gsource_check), (dbus_gsource_dispatch),
(add_watch), (remove_watch), (create_source):
Refcount fds, fixes some reentrancy issues.
2003-07-30 Havoc Pennington <hp@redhat.com>
* dbus/dbus-bus.c (init_connections_unlocked): fix default system
bus address to be abstract if we have abstract sockets
* NEWS: update
2003-07-28 Havoc Pennington <hp@redhat.com>
* bus/messagebus.in: fix to avoid processname/servicename
confusion, from Michael Kearey
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=100965
2003-07-23 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c (dbus_message_iter_get_named):
fix from Andy Hanton to remove broken "+1"
2003-07-16 Havoc Pennington <hp@pobox.com>
* tools/dbus-launch.c (babysit): close stdout/stderr in the
babysitter process, as suggested by Thomas Leonard, so
an "eval `dbus-launch --exit-with-session`" will actually
return
2003-07-16 Havoc Pennington <hp@pobox.com>
* configure.in: print out EXPANDED_* variables in the summary at
the end; clean up the code that computes EXPANDED_ variables and
get the ones using exec_prefix right. Should make things work
when you build without --prefix
2003-06-29 Havoc Pennington <hp@pobox.com>
* mono/Test.cs (class Test): fire up a main loop and run it
* mono/DBus.cs (DBus): don't g_thread_init since it can only be
done once, the app has to do it
2003-06-26 Havoc Pennington <hp@pobox.com>
* mono/Connection.cs: set up connection with the glib main loop
2003-07-01 Havoc Pennington <hp@redhat.com>
* doc/dbus-specification.sgml: clarify the format of a type code,
change suggested by Jim Blandy
2003-06-29 Miloslav Trmac <mitr@volny.cz>
* doc/Makefile.am:
* tools/Makefile.am: Don't assume srcdir == builddir.
* dbus/dbus-memory.c (dbus_realloc): Don't check guards after shrinking
the allocated block.
(_dbus_memory_test): New function.
* dbus/dbus-test.h: Add _dbus_memory_test ().
* dbus/dbus-test.c (dbus_internal_do_not_use_run_tests): Call it.
* dbus/dbus-message.c (decode_header_data): Use %.4s instead
of %c%c%c%c.
(dbus_message_new): Remove obsolete @todo.
* dbus/dbus-marshal.c (_dbus_marshal_set_int64)
(_dbus_marshal_set_uint64): Fix comment.
* dbus/dbus-message.c (append_int_field, append_uint_field): Don't
hardcode FIELD_REPLY_SERIAL.
* dbus/dbus-mainloop.c (_dbus_loop_remove_watch)
(_dbus_loop_remove_timeout): Cast function pointers to (void *) for %p
* configure.in: Add -D_POSIX_C_SOURCE=199309L -DBSD_SOURCE to CFLAGS
and disable DBUS_USE_ATOMIC_INT_486 when --enable-ansi is used
2003-06-24 Havoc Pennington <hp@pobox.com>
* mono/*.cs: Use IntPtr.Zero instead of ((IntPtr) 0)
2003-06-23 Anders Carlsson <andersca@codefactory.se>
* configure.in:
* gcj/.cvsignore:
* gcj/Hello.java:
* gcj/Makefile.am:
* gcj/TestMessage.java: (TestMessage), (TestMessage.main):
* gcj/org/.cvsignore:
* gcj/org/Makefile.am:
* gcj/org/freedesktop/.cvsignore:
* gcj/org/freedesktop/Makefile.am:
* gcj/org/freedesktop/dbus/.cvsignore:
* gcj/org/freedesktop/dbus/Makefile.am:
* gcj/org/freedesktop/dbus/Message.java: (Message),
(Message.Message):
* gcj/org/freedesktop/dbus/natMessage.cc:
Fix the build system.
2003-06-22 Havoc Pennington <hp@pobox.com>
* mono/Connection.cs: add more bindings
* dbus/dbus-threads.c (dbus_threads_init): allow calling this
more than once.
2003-06-22 Havoc Pennington <hp@pobox.com>
* mono/Connection.cs, mono/DBus.cs, mono/Error.cs:
Start wrapping more stuff.
2003-06-22 Havoc Pennington <hp@pobox.com>
* mono/Message.cs: implement Message.Wrap() that ensures we only
have a single C# wrapper per DBusMessage, assuming it works which
it probably doesn't.
* dbus/dbus-message.c (dbus_message_allocate_data_slot): new
(dbus_message_free_data_slot): new
(dbus_message_set_data): new
(dbus_message_get_data): new
2003-06-22 Havoc Pennington <hp@pobox.com>
* dbus/dbus-dataslot.c (_dbus_data_slot_allocator_unref)
(_dbus_data_slot_allocator_alloc): rework these to keep a
reference count on each slot and automatically manage a global
slot ID variable passed in by address
* bus/bus.c: convert to new dataslot API
* dbus/dbus-bus.c: convert to new dataslot API
* dbus/dbus-connection.c: convert to new dataslot API
* dbus/dbus-server.c: convert to new dataslot API
* glib/dbus-gmain.c: ditto
* bus/test.c: ditto
* bus/connection.c: ditto
2003-06-22 Anders Carlsson <andersca@codefactory.se>
* configure.in: Add AM_PROG_GCJ and move AM_PROG_LIBTOOL
after the gcj checks so that the correct configuration tags
will be added to libtool.
* dbus-glib-1.pc.in: No need to specify any includes since
dbus-1.pc.in has those.
2003-06-22 Havoc Pennington <hp@pobox.com>
* mono/*, gcj/*, configure.in, Makefile.am:
Check in makefiles and subdirs for mono and gcj bindings.
Neither binding actually exists, just trying to get through
all the build and other boring bits.
2003-06-21 Philip Blundell <philb@gnu.org>
* tools/dbus-monitor.1: Updated.
* tools/dbus-send.1: Likewise.
2003-06-20 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-transport-unix.c (unix_handle_watch): Check
for hangup and error after checking read so we won't discard
pending data if both hangup and read are set.
2003-06-19 Philip Blundell <philb@gnu.org>
* tools/dbus-print-message.c (print_message): Handle BOOLEAN.
* tools/dbus-send.c: Accept both --system and --session.
* tools/dbus-monitor.c: Same here.
2003-06-19 Anders Carlsson <andersca@codefactory.se>
* glib/dbus-glib.h: Fix so that dbus-glib.h can be used
from C++ (Patch by Miloslav Trmac).
2003-06-15 Joe Shaw <joe@assbarn.com>
* configure.in: Check for socklen_t.
* dbus/dbus-sysdeps.c: Define socklen_t if it's not defined.
* test/test-segfault.c: Add #include <sys/time.h>
* tools/Makefile.am: Add DBUS_X_CFLAGS to the INCLUDES since
dbus-launch needs it.
2003-06-09 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.c (_dbus_listen_unix_socket): don't use
SUN_LEN, it breaks abstract socket usage
* dbus/dbus-internals.c (_dbus_verbose_real): only print PID at
starts of lines.
2003-06-04 Havoc Pennington <hp@pobox.com>
* dbus/dbus-server.c (dbus_server_listen): allow abstract sockets
using unix:abstract=/foo, and when listening in a tmpdir
i.e. unix:tmpdir=/tmp, always use abstract sockets if we can.
* dbus/dbus-transport.c (_dbus_transport_open): support
unix:abstract=/foo
* dbus/dbus-server-unix.c (_dbus_server_new_for_domain_socket):
support abstract sockets
* dbus/dbus-transport-unix.c
(_dbus_transport_new_for_domain_socket): support abstract sockets
* dbus/dbus-sysdeps.c (_dbus_connect_unix_socket): add "abstract"
toggle as an argument, implement abstract namespace support
(_dbus_listen_unix_socket): ditto
* configure.in: add --enable-abstract-sockets and implement
a configure check for autodetection of the right value.
2003-06-01 Havoc Pennington <hp@pobox.com>
* tools/dbus-cleanup-sockets.c: add utility to clean up sockets
in /tmp (though on Linux this will end up being useless,
when we add abstract namespace support)
* configure.in: define DBUS_SESSION_SOCKET_DIR in addition to
subst'ing it
2003-05-28 Colin Walters <walters@verbum.org>
* tools/dbus-monitor.c (main): Fix silly typo (s/--session/--system/).
2003-05-18 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-message.c (dbus_message_new): Remove @todo.
2003-05-17 Colin Walters <walters@gnu.org>
* tools/dbus-send.c: Don't exit with an error code if --help was
passed. Default to using the session bus instead of the system
one.
* tools/dbus-launch.c: Ditto.
* tools/dbus-monitor.c: Ditto.
* tools/dbus-send.1: Update with new arguments.
* tools/dbus-launch.c: Emit code to export variables. New
arguments -s and -c to specify shell syntax, and a bit of code to
autodetect syntax. Also, allow specifying a program to run.
* tools/dbus-launch.1: Update with new arguments.
* tools/dbus-send.1: Ditto.
* tools/dbus-monitor.1: Ditto.
2003-05-17 Havoc Pennington <hp@pobox.com>
* bus/config-parser.c (merge_included): merge in policies from
child configuration file.
* bus/policy.c (bus_policy_merge): function to merge two policies
together
2003-05-16 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.c: disable verbose lock spew
* tools/dbus-send.c: add --print-reply command line option
* tools/dbus-print-message.h (print_message): new util function
shared by dbus-send and dbus-monitor
* tools/dbus-monitor.c (handler_func): exit on disconnect
* dbus/dbus-transport-unix.c (do_reading): if the transport is
disconnected, don't try to use the read_watch
* dbus/dbus-watch.c (dbus_watch_get_enabled): assert watch != NULL
so we can find this bug more easily
2003-05-16 Havoc Pennington <hp@redhat.com>
* bus/policy.c (free_rule_list_func): avoid a crash when passed
NULL as DBusHashTable is annoyingly likely to do.
2003-05-16 Colin Walters <walters@verbum.org>
* tools/dbus-monitor.c: Add --session argument and usage()
function.
* tools/dbus-monitor.1: Update with new --session arg.
* bus/Makefile.am (install-data-hook): Create
$(libdir)/dbus-1.0/services so that the session bus is happy.
2003-05-15 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.c (_dbus_atomic_dec, _dbus_atomic_inc): work
on non-x86. ifdef's are evil.
2003-05-15 Havoc Pennington <hp@redhat.com>
* configure.in: 0.11
* NEWS: update
* bus/Makefile.am (initddir): apparently we are supposed to put
init scripts in /etc/rc.d/init.d not /etc/init.d
* bus/Makefile.am: remove the "you must --enable-tests to make
check" as it broke distcheck
* bus/Makefile.am (install-data-hook): create /etc/dbus-1/system.d
2003-05-13 James Willcox <jwillcox@gnome.org>
* configure.in:
* bus/activation.c: (bus_activation_service_created),
(bus_activation_activate_service):
* bus/driver.c: (bus_driver_send_service_deleted),
(bus_driver_send_service_created), (bus_driver_send_service_lost),
(bus_driver_send_service_acquired),
(bus_driver_send_welcome_message),
(bus_driver_handle_list_services):
* bus/session.conf.in:
* dbus/dbus-bus.c: (dbus_bus_acquire_service),
(dbus_bus_service_exists), (dbus_bus_activate_service):
* dbus/dbus-bus.h:
Add some convenience API which lets you activate a service, and did a
bunch of s/0/DBUS_TYPE_INVALID/ in calls to dbus_message_append_args()
and dbus_message_get_args()
2003-05-11 Havoc Pennington <hp@pobox.com>
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): fix to avoid
calling _dbus_marshal_validate_arg() for every byte in a byte
array, etc.
* dbus/dbus-message-handler.c: use atomic reference counting to
reduce number of locks slightly; the global lock in here sucks
* dbus/dbus-connection.c
(_dbus_connection_update_dispatch_status_and_unlock): variant of
update_dispatch_status that can be called with lock held; then use
in a couple places to reduce locking/unlocking
(dbus_connection_send): hold the lock over the whole function
instead of acquiring it twice.
* dbus/dbus-timeout.c (_dbus_timeout_new): handle OOM
* bus/connection.c (bus_connections_setup_connection): fix access
to already-freed memory.
* dbus/dbus-connection.c: keep a little cache of linked list
nodes, to avoid using the global linked list alloc lock in the
normal send-message case. Instead we just use the connection lock
that we already have to take.
* dbus/dbus-list.c (_dbus_list_find_last): new function
* dbus/dbus-sysdeps.c (_dbus_atomic_inc, _dbus_atomic_dec):
change to use a struct for the atomic type; fix docs,
they return value before increment, not after increment.
* dbus/dbus-string.c (_dbus_string_append_4_aligned)
(_dbus_string_append_8_aligned): new functions to try to
microoptimize this operation.
(reallocate_for_length): break this out of set_length(), to
improve profile info, and also so we can consider inlining the
set_length() part.
* dbus/dbus-message.c (dbus_message_new_empty_header): init data
strings with some preallocation, cuts down on our calls to realloc
a fair bit. Though if we can get the "move entire string to empty
string" optimization below to kick in here, it would be better.
* dbus/dbus-string.c (_dbus_string_move): just call
_dbus_string_move_len
(_dbus_string_move_len): add a special case for moving
an entire string into an empty string; we can just
swap the string data instead of doing any reallocs.
(_dbus_string_init_preallocated): new function
2003-05-11 Havoc Pennington <hp@pobox.com>
Write a "test-profile" that does echo client-server with threads;
profile reveals lock contention, memcpy/realloc of buffers, and
UTF-8 validation as hot spots. 20% of lock contention eliminated
with dbus_atomic_inc/dec implementation on x86. Much remaining
contention is global mempool locks for GList and DBusList.
* dbus/dbus-sysdeps.c (_dbus_atomic_inc, _dbus_atomic_dec): add
x86 implementation
* dbus/dbus-connection.c (struct DBusConnection): use
dbus_atomic_t for the reference count
* dbus/dbus-message.c (struct DBusMessage): declare
dbus_atomic_t values as volatile
* configure.in: code to detect ability to use atomic integer
operations in assembly, from GLib patch
* dbus/dbus-internals.c (_dbus_verbose_real): call getpid every
time, tired of it being wrong in threads and forked processes
* glib/test-profile.c: a little program to bounce messages back
and forth between threads and eat CPU
* dbus/dbus-connection.c: add debug spew macros for debugging
thread locks; include config.h at top; fix deadlock in
dbus_connection_flush()
2003-05-08 Havoc Pennington <hp@pobox.com>
* dbus/dbus-spawn.c: s/_exit/exit/ because it was keeping gcov
data from getting written, and there wasn't a good reason to
use _exit really.
* test/decode-gcov.c (mark_inside_dbus_build_tests): don't count
dbus_verbose lines in test coverage
(main): add list of functions sorted by # of untested blocks
to the coverage report
* dbus/dbus-mempool.c: put some test-only code in DBUS_BUILD_TESTS
* dbus/dbus-marshal.c (_dbus_marshal_test): extend test coverage
* dbus/dbus-message-handler.c (_dbus_message_handler_test):
extend test coverage
* test/data/auth/cancel.auth-script: test canceling an
authentication
* dbus/Makefile.am: remove dbus-server-debug.[hc] for now, as they
aren't used. in CVS history if we end up needing them.
2003-05-04 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message-handler.c (_dbus_message_handler_test): add
unit test
* dbus/dbus-marshal.c (_dbus_demarshal_string_array): fix this
function, which assumed length was in # of strings, not bytes
* dbus/dbus-message.c (_dbus_message_test): add tests for some
missing coverage
* dbus/dbus-connection.c
(_dbus_connection_queue_received_message): disable function for
now, we are only using it in test mode
* dbus/dbus-message.c (_dbus_message_loader_queue_messages):
remove a mistaken FIXME
2003-05-04 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c (dbus_connection_preallocate_send):
unlock mutex on successful return, patch from Anders Gustafsson
2003-05-04 Havoc Pennington <hp@pobox.com>
* dbus-glib-1.pc.in (Requires): fix dependencies, from
Anders Gustafsson
2003-05-04 Havoc Pennington <hp@pobox.com>
* tools/dbus-launch.c: implement
* bus/main.c (main), bus/bus.c (bus_context_new):
implement --print-pid and --fork
2003-05-03 Havoc Pennington <hp@redhat.com>
* dbus/dbus-address.c (dbus_parse_address): fix bug when a key in
the address had no value, and add to test suite. Fix and
regression test from Miloslav Trmac
2003-05-03 Havoc Pennington <hp@pobox.com>
* dbus/dbus-watch.c (dbus_watch_handle): warn and return if a
watch is invalid when handled
* tools/Makefile.am, tools/dbus-launch.c, tools/dbus-launch.1: add
dbus-launch utility to launch the bus from a shell script. Didn't
actually implement dbus-launch yet, it's just a placeholder still.
2003-05-03 Havoc Pennington <hp@pobox.com>
* bus/Makefile.am, bus/dbus-daemon-1.1.in: man page for the
daemon; also documents daemon config file, so replaces
doc/config-file.txt. Corrected some stuff from config-file.txt in
the process of moving it.
2003-05-03 Havoc Pennington <hp@pobox.com>
* tools/Makefile.am, tools/dbus-send.1, tools/dbus-monitor.1:
add some man pages
2003-05-03 Colin Walters <walters@verbum.org>
* dbus/dbus-sysdeps.c (fill_user_info): Test against
DBUS_UID_UNSET to determine whether to do a uid lookup or not.
* Makefile.am: Update to use new .pc versioning scheme.
2003-05-02 Havoc Pennington <hp@redhat.com>
* bus/system.conf.in: allow send/receive to/from message bus
service
2003-04-30 Havoc Pennington <hp@redhat.com>
* configure.in: print a note when building with unit tests and
without assertions
2003-04-30 Havoc Pennington <hp@redhat.com>
* Makefile.am: add a check-local that complains if you didn't
configure with --enable-tests
2003-04-29 Havoc Pennington <hp@redhat.com>
* glib/dbus-gmain.c: docs cleanups
* dbus/dbus-types.h: add docs on int64 types
* dbus/dbus-memory.c: fix docs to avoid putting private API in
public API docs section
2003-04-29 Havoc Pennington <hp@redhat.com>
* dbus-1.pc.in, dbus-glib-1.pc.in: rename these from
dbus-1.0.pc.in, dbus-glib-1.0.pc.in. As these change with the
parallel install API version, not with the D-BUS package version.
* HACKING: move some of README over here
* README: updates, and document API/ABI policy
* configure.in: reindentation
2003-04-29 Havoc Pennington <hp@redhat.com>
* dbus/dbus.h: add "you have to define DBUS_API_SUBJECT_TO_CHANGE
to use this library" to be sure people have the right
expectations.
2003-04-28 Havoc Pennington <hp@redhat.com>
* configure.in: add --enable-docs which by default is auto yes if
doxygen and db2html found, no otherwise; but can be forced on/off
* doc/Makefile.am: conditionalize whether to build docs on
--enable-docs
2003-04-28 Havoc Pennington <hp@redhat.com>
* configure.in: 0.10
* NEWS: update
* bus/system.conf.in: add <includedir>system.d</includedir>
* dbus/dbus-userdb.c (_dbus_user_database_lookup): fix bug when
username was provided but not uid
* bus/config-parser.c (struct BusConfigParser): keep track of
whether the parser is toplevel or was included; change some
of the error handling if it's included.
2003-04-27 Havoc Pennington <hp@pobox.com>
Unbreak my code...
* dbus/dbus-transport.c (_dbus_transport_get_dispatch_status):
report correct status if we finish processing authentication
inside this function.
* bus/activation.c (try_send_activation_failure): use
bus_transaction_send_error_reply
* bus/connection.c (bus_connection_get_groups): return an error
explaining the problem
* bus/bus.c (bus_context_check_security_policy): implement
restriction here that inactive connections can only send the
hello message. Also, allow bus driver to send anything to
any recipient.
* bus/connection.c (bus_connection_complete): create the
BusClientPolicy here instead of on-demand.
(bus_connection_get_policy): don't return an error
* dbus/dbus-message.c (dbus_message_new_error_reply): allow NULL
sender field in message being replied to
* bus/bus.c (bus_context_check_security_policy): fix silly typo
causing it to return FALSE always
* bus/policy.c (bus_client_policy_check_can_send): fix bug where
we checked sender rather than destination
2003-04-25 Havoc Pennington <hp@redhat.com>
test suite is slightly hosed at the moment, will fix soon
* bus/connection.c (bus_connections_expire_incomplete): fix to
properly disable the timeout when required
(bus_connection_set_name): check whether we can remove incomplete
connections timeout after we complete each connection.
* dbus/dbus-mainloop.c (check_timeout): fix this up a bit,
probably still broken.
* bus/services.c (bus_registry_acquire_service): implement max
number of services owned, and honor allow/deny rules on which
services a connection can own.
* bus/connection.c (bus_connection_get_policy): report errors here
* bus/activation.c: implement limit on number of pending
activations
2003-04-25 Havoc Pennington <hp@redhat.com>
* dbus/dbus-transport.c (_dbus_transport_get_unix_user): fix bug
where we used >= 0 instead of != DBUS_UID_UNSET.
2003-04-25 Havoc Pennington <hp@redhat.com>
* glib/dbus-gmain.c (remove_watch): fix for a crash when watches
were toggled without add/remove, fix from Anders Gustafsson
2003-04-24 Havoc Pennington <hp@redhat.com>
* test/data/valid-config-files/basic.conf: add <limit> tags to
this test
* bus/config-parser.h, bus/config-parser.c, bus/bus.c: Implement
<limit> tag in configuration file.
2003-04-24 Havoc Pennington <hp@redhat.com>
* bus/dispatch.c: somehow missed some name_is
* dbus/dbus-timeout.c (_dbus_timeout_set_enabled)
(_dbus_timeout_set_interval): new
* bus/connection.c (bus_connections_setup_connection): record time
when each connection is first set up, and expire them after the
auth timeout passes.
2003-04-24 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.c (dbus_message_name_is): rename
(dbus_message_service_is): rename
(dbus_message_sender_is): rename
(dbus_message_get_service): rename
2003-04-24 Havoc Pennington <hp@redhat.com>
* configure.in: add --enable-checks
* dbus/dbus-message.c (dbus_message_new): reverse name/service arguments
* dbus/dbus-connection.c (dbus_connection_preallocate_send): fix
to use thread locks.
(_dbus_connection_handler_destroyed_locked): move some private
functions into proper docs group
* dbus/dbus-internals.h: add _dbus_return_if_fail,
_dbus_return_val_if_fail
Throughout: use dbus_return_if_fail
2003-04-23 James Willcox <jwillcox@gnome.org>
* glib/dbus-glib.h:
* glib/dbus-gmain.c: (add_timeout), (wakeup_main), (create_source),
(dbus_connection_setup_with_g_main),
(dbus_server_setup_with_g_main):
* glib/test-dbus-glib.c: (main):
* glib/test-thread-client.c: (main):
* glib/test-thread-server.c: (new_connection_callback), (main):
* tools/dbus-monitor.c: (main):
Added a GMainContext argument to dbus_connection_setup_with_g_main()
and dbus_server_setup_with_g_main().
2003-04-20 Havoc Pennington <hp@pobox.com>
* doc/dbus-specification.sgml: document the restrictions on
message and service names
2003-04-22 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.c, dbus/dbus-marshal.c: add 64-bit integer
support, and do some code cleanups to share more code and
speed up array marshal/demarshal.
* dbus-1.0.pc.in (Cflags): put libdir include file in cflags
* configure.in: generate dbus-arch-deps.h
* dbus/dbus-protocol.h (DBUS_TYPE_INT64, DBUS_TYPE_UINT64): add
64-bit typecodes
2003-04-22 Havoc Pennington <hp@redhat.com>
* test/data/valid-messages/opposite-endian.message: fix test
to use proper type for rply field
* test/data/invalid-messages: add tests for below validation
* dbus/dbus-message.c (decode_header_data): validate field types,
and validate that named fields are valid names
(decode_name_field): consider messages in the
org.freedesktop.Local. namespace to be invalid.
* dbus/dbus-string.c (_dbus_string_validate_name): new
2003-04-19 Havoc Pennington <hp@pobox.com>
* bus/driver.c (bus_driver_handle_hello): check limits and
return an error if they are exceeded.
* bus/connection.c: maintain separate lists of active and inactive
connections, and a count of each. Maintain count of completed
connections per user. Implement code to check connection limits.
* dbus/dbus-list.c (_dbus_list_unlink): export
* bus/bus.c (bus_context_check_security_policy): enforce a maximum
number of bytes in the message queue for a connection
2003-04-18 Havoc Pennington <hp@pobox.com>
* dbus/dbus-auth.c (record_mechanisms): memleak fixes
* dbus/dbus-sysdeps.c (_dbus_string_save_to_file): fix some
memleaks
* dbus/dbus-keyring.c (add_new_key): fix a memleak, and
on realloc be sure to update the pointer in the keyring
* dbus/dbus-string.c (_dbus_string_zero): compensate for align
offset to avoid writing to unallocated memory
* dbus/dbus-auth.c (process_rejected): return FALSE if we fail to
try the next mechanism, so we properly handle OOM
* dbus/dbus-keyring.c (_dbus_keyring_new_homedir): fix double-free
on OOM.
(_dbus_keyring_new): fix OOM bug
(_dbus_keyring_new_homedir): always set error; impose a maximum
number of keys we'll load from the file, mostly to speed up the
test suite and make its OOM checks more useful, but also for
general sanity.
* dbus/dbus-auth.c (process_error_server): reject authentication
if we get an error from the client
(process_cancel): on cancel, send REJECTED, per the spec
(process_error_client): send CANCEL if we get an error from the
server.
2003-04-18 Havoc Pennington <hp@pobox.com>
* dbus/dbus-mainloop.c (_dbus_loop_iterate): fix UMR in verbose
debug spew
* dbus/dbus-auth.c (handle_client_data_cookie_sha1_mech): fix OOM
handling problem
* dbus/dbus-keyring.c (_dbus_keyring_new_homedir): only whine
about DBUS_TEST_HOMEDIR once
* bus/Makefile.am (TESTS_ENVIRONMENT): put DBUS_TEST_HOMEDIR in
the environment
* bus/dispatch.c (bus_dispatch_sha1_test): actually load sha1
config file so we test the right thing
Throughout: assorted docs improvements
2003-04-18 Havoc Pennington <hp@pobox.com>
* glib/dbus-gmain.c: adapt to watch changes
* bus/bus.c, bus/activation.c, etc.: adjust to watch changes
* dbus/dbus-server.h: remove dbus_server_handle_watch
* dbus/dbus-connection.h: remove dbus_connection_handle_watch
* dbus/dbus-watch.c (dbus_watch_handle): change DBusWatch to work
like DBusTimeout, so we don't need dbus_connection_handle_watch
etc.
2003-04-17 Havoc Pennington <hp@redhat.com>
* dbus/dbus-userdb.c, dbus/dbus-sysdeps.c: redo all the passwd
database usage so it all goes via the DBusUserDatabase cache.
2003-04-17 Havoc Pennington <hp@redhat.com>
* dbus/dbus-mainloop.c (_dbus_loop_iterate): fix logic so that if
there was an OOM watch we skipped, we always return TRUE so we
iterate again to have a look at it again. Fixes test suite hang.
Code rearrangement also lets us lose some memset and only iterate
over callbacks once.
* bus/driver.c (bus_driver_handle_message): sense of test for
reply was backward
2003-04-16 Havoc Pennington <hp@pobox.com>
* doc/dbus-specification.sgml: make spec say serials are unsigned
* dbus/dbus-message.h: change message serials to unsigned
* dbus/dbus-connection.c: adapt to message serials being unsigned
2003-04-15 Havoc Pennington <hp@pobox.com>
* bus/bus.c: create and keep around a shared DBusUserDatabase
object.
* bus/connection.c (bus_connection_get_groups): don't cache
groups for user in the connection object, since user database
object now does that.
2003-04-16 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.c (_dbus_message_add_size_counter): keep a
list of size counters
(_dbus_message_loader_putback_message_link): put back a popped link
* dbus/dbus-connection.c
(dbus_connection_set_max_live_messages_size): rename
max_received_size
(dbus_connection_get_outgoing_size): get size of outgoing
queue
(_dbus_connection_set_connection_counter): remove this cruft
2003-04-14 Havoc Pennington <hp@redhat.com>
* dbus/dbus-userdb.c: user database abstraction, mostly to get
caching, but at some point we might want to be able to use a
different database.
* bus/dispatch.c (bus_dispatch_sha1_test): add a test that uses
SHA1 conf file to test the sha1 auth mechanism, since the regular
test always uses EXTERNAL when available.
* configure.in,
test/data/valid-config-files/debug-allow-all-sha1.conf.in:
add conf file that requires use of sha1 auth
2003-04-13 Havoc Pennington <hp@pobox.com>
* tools/dbus-send.c, tools/dbus-monitor.c: two utility programs
from Philip Blundell to send messages and monitor them.
2003-04-13 Havoc Pennington <hp@pobox.com>
* dbus/dbus-mainloop.c: fix some reentrancy issues by refcounting
callbacks
* test/data/valid-config-files/debug-allow-all.conf.in: allow all
users
* dbus/dbus-transport.c (_dbus_transport_get_dispatch_status):
fix to only recover unused bytes if we're already authenticated
(_dbus_transport_get_is_authenticated): fix to still mark us
authenticated if there are unused bytes.
* bus/dispatch.c: implement security policy checking
* bus/connection.c (bus_transaction_send_from_driver): new
* bus/bus.c (bus_context_check_security_policy): new
* bus/dispatch.c (send_service_nonexistent_error): delete this,
now we just set the DBusError and it gets converted to an error
reply.
* bus/connection.c (allow_user_function): enable code using actual
data from the config file
* bus/policy.c (list_allows_user): handle wildcard rules for
user/group connection perms
2003-04-13 Havoc Pennington <hp@pobox.com>
* bus/config-parser.c: Load up the BusPolicy and BusPolicyRules
* dbus/dbus-sysdeps.c (_dbus_get_user_id): new function
* bus/policy.c (bus_policy_append_mandatory_rule)
(bus_policy_append_default_rule, bus_policy_append_user_rule)
(bus_policy_append_group_rule): new functions
2003-04-12 Havoc Pennington <hp@pobox.com>
* bus/config-parser.c (bus_config_parser_new): fix a memleak
* dbus/dbus-sysdeps.c: change DBusCredentials to use longs for
the pid/gid/uid, just for paranoia.
* test/break-loader.c (randomly_do_n_things): find a byte
containing a type code, and randomly change it to a different
type code.
2003-04-12 Havoc Pennington <hp@pobox.com>
* bus/policy.h: change BusPolicy to be the thing from the config
file, and rename old BusPolicy to BusClientPolicy
* bus/bus.c, bus/connection.c, bus/config-parser.c: change to
match change in how policy works
* dbus/dbus-internals.h: mark assert_not_reached as
__attribute((noreturn))__
2003-04-11 Havoc Pennington <hp@redhat.com>
* doc/dbus-specification.sgml: fix a spot with the wrong name for
the broadcast service. Use boolean return for ServiceExists.
2003-04-11 Havoc Pennington <hp@redhat.com>
* configure.in: add another directory to look for qt in.
2003-04-11 Havoc Pennington <hp@redhat.com>
* AUTHORS: add Colin Walters
2003-04-11 Havoc Pennington <hp@redhat.com>
* NEWS: update
* configure.in: 0.9
2003-04-11 Havoc Pennington <hp@redhat.com>
* bus/messagebus.in: remove pid file when stopping the
message bus, since the bus won't have privileges to remove it
itself.
2003-04-11 Havoc Pennington <hp@redhat.com>
* bus/bus.c (bus_context_new): move credentials change after
creating pidfile
2003-04-11 Havoc Pennington <hp@pobox.com>
* test/decode-gcov.c: add "below average functions" to the
coverage report, and change how some of the code works.
* bus/test-main.c: bracket some stuff in DBUS_BUILD_TESTS so it's
not in the coverage stats.
* test/test-service.c (main): use _dbus_verbose not fprintf in a
couple places so running the test suite doesn't result in megaspam.
2003-04-11 Havoc Pennington <hp@pobox.com>
* bus/dispatch.c (check_existent_service_activation): accept a no
memory error in a place we didn't before
* bus/test.c (bus_test_run_everything): remove hacky "do it twice
in case the first one failed," since the test suite is less
broken now.
2003-04-10 Havoc Pennington <hp@pobox.com>
* bus/dispatch.c (check_segfault_service_activation): add test
for launching an executable that just crashes.
* test/test-segfault.c (main): try setting coredumpsize to 0 so we
don't leave a million cores. We'll see how portable this is.
2003-04-10 Havoc Pennington <hp@pobox.com>
* dbus/dbus-spawn.c (_dbus_spawn_async_with_babysitter): move all
the possible parent failures before we fork, so that we don't
fail to create a babysitter after creating the child.
* bus/activation.c (bus_activation_activate_service): kill child
if we don't successfully complete the activation.
2003-04-10 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.c (dbus_connection_flush): don't spin on
the connection if it's disconnected
* bus/activation.c (bus_activation_service_created): use new
transaction features to roll back removal of pending activation if
we don't successfully create the service after all. Don't remove
pending activation if the function fails.
* dbus/dbus-list.c (_dbus_list_insert_before_link)
(_dbus_list_insert_after_link): new code to facilitate
services.c fixes
* dbus/dbus-hash.c (_dbus_hash_table_insert_string_preallocated):
new functionality, so we can preallocate the ability to insert
into a hash table.
* bus/connection.c (bus_transaction_add_cancel_hook): new function
allowing us to put custom hooks in a transaction to be used for
cancelling said transaction
* doc/dbus-specification.sgml: add some discussion of secondary
service owners, and disallow zero-length service names
* bus/services.c (bus_registry_acquire_service): new function,
splits out part of bus_driver_handle_acquire_service() and fixes
a bug where we didn't remove the service doing the acquiring
from the secondary queue if we failed to remove the current owner
from the front of the queue.
2003-04-10 Alexander Larsson <alexl@redhat.com>
* doc/dbus-specification.sgml:
s/org.freedesktop.Broadcast/org.freedesktop.DBus.Broadcast/
2003-04-10 Alexander Larsson <alexl@redhat.com>
* bus/.cvsignore:
* glib/.cvsignore:
* test/.cvsignore:
Added files to cvsignore
* dbus/dbus-message.h:
* dbus/dbus-message.c: (dbus_message_iter_get_named):
Make get_named() take two out argument and return a boolean.
(dbus_message_iter_get_args_valist):
Update usage of get_named().
(dbus_message_iter_append_byte):
Fix typo
(dbus_message_iter_append_named)
Fix typo
(message_iter_test), (check_message_handling_type), (_dbus_message_test):
More tests.
2003-04-10 Alexander Larsson <alexl@redhat.com>
* dbus/dbus-marshal.[ch]:
Add array_type_pos argument to _dbus_marshal_validate_arg.
Let you pass a NULL end_pos to _dbus_marshal_validate_type.
* dbus/dbus-message.[ch]:
Multi-dimensional arrays have full type specification in the
outermost array. Iter code re-arranged to handle this.
Added some more iter tests.
* doc/dbus-specification.sgml:
Add me to authors.
Remove old FIXME.
Update new array encoding description.
Correct DBUS_SERVICE_FLAGS_REPLACE_EXISTING description.
* test/data/invalid-messages/array-with-mixed-types.message:
* test/data/valid-messages/array-of-array-of-uint32.message:
Change to the new array format.
* test/data/invalid-messages/too-short-dict.message:
Fix bug in test.
* test/data/valid-messages/recursive-types.message:
Fix up and extend test.
2003-04-10 Havoc Pennington <hp@pobox.com>
* bus/dispatch.c: lots of fixes
* dbus/dbus-mainloop.c (_dbus_loop_dispatch): export
(_dbus_loop_iterate): remove old "quit if no callbacks" code,
that was crack, broke the test service.
* dbus/dbus-transport.c (_dbus_transport_open): fix error
handling to avoid piling up errors if we get a failure on the
first address.
* dbus/dbus-internals.c (_dbus_real_assert_not_reached): include
pid in assertion failures.
* dbus/dbus-mainloop.c (_dbus_loop_iterate): use static arrays up
to some fixed size of file descriptor array. Don't return TRUE
anytime a timeout exists, that led to lots of busy loop silliness
in the tests.
2003-04-09 Havoc Pennington <hp@redhat.com>
* dbus/dbus-mainloop.c (check_timeout): fix timeouts, I thought
I'd checked this in earlier but hadn't.
2003-04-09 Havoc Pennington <hp@redhat.com>
* bus/dispatch.c (bus_dispatch_test): get a bit further through
the activation test (man this is getting old!)
2003-04-09 Havoc Pennington <hp@redhat.com>
* test/test-utils.c: use dispatch status function to fix this up
* bus/connection.c (connection_watch_callback): don't dispatch
from here
(connection_timeout_callback): don't dispatch from here
(bus_connections_setup_connection): set the dispatch status function
(bus_connection_disconnected): unset it
* dbus/dbus-mainloop.c (_dbus_loop_queue_dispatch): new function
used to add a connection to be dispatched
(_dbus_loop_iterate): do the dispatching at the end of each
iteration
* dbus/dbus-connection.c
(dbus_connection_set_dispatch_status_function): new function
allowing us to fix up main loop usage
(_dbus_connection_last_unref): free all the various function
user data
(dbus_connection_dispatch): call the DispatchStatusFunction
whenever this function returns
(dbus_connection_handle_watch): call DispatchStatusFunction
(dbus_connection_send_with_reply_and_block): call DispatchStatusFunction
(reply_handler_timeout): call DispatchStatusFunction
(dbus_connection_flush): call DispatchStatusFunction
2003-04-09 Havoc Pennington <hp@redhat.com>
* dbus/dbus-bus.c (dbus_bus_register): fix up error handling and
a memory leak
* bus/dispatch.c (check_service_activated): fix bug in test
* dbus/dbus-mainloop.c (check_timeout): fix this up
* dbus/dbus-internals.c (_dbus_verbose_real): include PID in
verbose output so we can sort out output from different processes,
e.g. in the activation case.
2003-04-08 Colin Walters <walters@gnu.org>
* bus/bus.c (struct BusContext) [pidfile]: New member, to store
the pid file.
(bus_context_new): Set it.
(bus_context_unref): Use it to delete the pid file.
2003-04-08 Havoc Pennington <hp@redhat.com>
* test/data/invalid-messages/array-with-mixed-types.message:
regression test that fails for the moment
* dbus/dbus-test.c (dbus_internal_do_not_use_run_tests): reorder
tests for convenience
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): don't allow
array of nil, it broke things.
* test/data/invalid-messages/array-of-nil.message: regression test
* test/data/valid-messages/array-of-array-of-uint32.message:
happened to write this so added it to suite
2003-04-08 Havoc Pennington <hp@redhat.com>
* bus/driver.c (bus_driver_handle_acquire_service): init
retval/reply before checking name
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): add a
recursion depth argument
* dbus/dbus-message.h (struct DBusMessageIter): put some padding
in the public struct for future extension
* dbus/dbus-message-builder.c (_dbus_message_data_load): fix
typo
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): fix a verbose
message
* doc/dbus-specification.sgml: fix typo
2003-04-08 Alexander Larsson <alexl@redhat.com>
Implemented recursive types, named types and new-style iters
* bus/driver.c:
* glib/test-thread-client.c: (thread_func):
* glib/test-thread-server.c: (handle_test_message):
* test/test-service.c: (handle_echo):
Update to new api
* dbus/Makefile.am:
* dbus/dbus-dict.c:
* dbus/dbus-dict.h:
* dbus/dbus.h
Remove DBusDict
* dbus/dbus-internals.c: (_dbus_type_to_string):
Update for new types.
* dbus/dbus-marshal.[ch]:
Implement recursive types and the new marshalling format.
Remove hardcoded dict marshalling.
Marshal named types.
* dbus/dbus-message-builder.c:
Add BYTE_ARRAY.
Remove references to old types
* dbus/dbus-message.[ch]:
New non-refcounted iter API that supports recursive iters.
Use iters for appending, including support for recursive
iters.
Add byte and named type support.
Update everything to new marshalling formats.
Add tests for new API.
* dbus/dbus-protocol.h:
Remove old array types.
Add types: BYTE, ARRAY, DICT, NAMED
* dbus/dbus-string.c:
* dbus/dbus-sysdeps.c:
Make parse_double locale safe.
* dbus/dbus-test-main.c:
Call setlocale.
* dbus/dbus-test.c:
Kill dict test
* doc/dbus-specification.sgml:
Update spec
* test/data/incomplete-messages/missing-body.message:
* test/data/invalid-messages/bad-boolean.message:
* test/data/invalid-messages/bad-boolean-array.message:
* test/data/invalid-messages/boolean-array-length-too-long.message-raw:
* test/data/invalid-messages/boolean-has-no-value.message-raw:
* test/data/invalid-messages/too-short-dict.message:
* test/data/valid-messages/dict-simple.message:
* test/data/valid-messages/dict.message:
* test/data/valid-messages/emptiness.message:
* test/data/valid-messages/lots-of-arguments.message:
* test/data/valid-messages/no-padding.message:
* test/data/valid-messages/recursive-types.message:
Add missing NAME fields
Fix up dicts & arrays
* test/data/invalid-messages/dict-with-nil-value.message:
Removed, this is not invalid anymore.
* test/data/valid-messages/recursive-types.message:
Add new test for deeply recursive types.
2003-04-07 Havoc Pennington <hp@pobox.com>
* bus/driver.c (bus_driver_handle_acquire_service): return an
error if you try to acquire a service that starts with ':'
2003-04-07 Havoc Pennington <hp@redhat.com>
* doc/dbus-specification.sgml: require that base service names
start with ':' and that the base service is created/deleted
as first and last things a connection does on the bus
* bus/dispatch.c (check_existent_service_activation): lots more
work on the activation test; it doesn't fully pass yet...
* test/test-service.c (main): fix so we don't memleak the
connection to the message bus
(filter_func): accept a message asking us to exit
2003-04-06 Havoc Pennington <hp@pobox.com>
* qt/Makefile.am (dbusinclude_HEADERS): install dbus-qt.h,
from Colin Walters
* configure.in: fixes to Qt detection from Colin Walters
* doc/Makefile.am: Only remove generated docbook dirs if they
exist, from Colin Walters
* dbus/dbus-bus.c: change how we set well-known connections to
NULL, so that it works if a single connection is stored in
two well-known array slots.
* test/Makefile.am: remove a lot of stuff that isn't immediately
useful, it's in CVS history if we want it.
* test/test-service.c: use dbus-mainloop instead of that
watch.[hc] crack
2003-04-06 Havoc Pennington <hp@pobox.com>
* dbus/Makefile.am: split lists of sources into stuff that goes in
the library, util functions that go in the lib and are also used
elsewhere, and util functions that are used in tests/daemon but
don't go in the lib.
* dbus/dbus-mainloop.h, dbus/dbus-mainloop.c: move bus/loop.[hc]
here so it can be used in test binaries also
2003-04-06 Havoc Pennington <hp@pobox.com>
* dbus/dbus-sysdeps.c (_dbus_become_daemon): write the pidfile
here in the parent process, so we can return an error if it
fails. Also, move some of the code into the child so the parent
is less hosed if we fail midway through.
* bus/bus.c (bus_context_new): move pidfile detection further up
in the function, before we start overwriting sockets and such.
* bus/messagebus.in: adjust this a bit, not sure if it will work.
* configure.in: add --with-system-pid-file and --with-system-socket
2003-04-06 Colin Walters <walters@verbum.org>
* configure.in (DBUS_SYSTEM_PID_FILE): New variable.
* bus/system.conf.in: Declare a pidfile.
* bus/bus.c (bus_context_new): Test for an existing pid file, and
create one (if appropriate).
* bus/config-parser.c (enum ElementType) [ELEMENT_PIDFILE]: New.
(struct BusConfigParser) [pidfile]: New.
(element_type_to_name, merge_included, start_busconfig_child)
(bus_config_parser_end_element, bus_config_parser_content): Handle it.
(bus_config_parser_unref): Free it.
(bus_config_parser_get_pidfile): New function.
* bus/config-parser.h (_dbus_write_pid_file): Prototype.
* dbus/dbus-errors.h (DBUS_ERROR_PIDFILE_EXISTS): New error.
* dbus/dbus-sysdeps.c (_dbus_write_pid_file): New function.
* dbus/dbus-sysdeps.h: Prototype it.
2003-04-06 Havoc Pennington <hp@pobox.com>
* bus/bus.c (bus_context_new): print the address in here, rather
than in main(), because we need to do it before forking the daemon
* bus/dispatch.c (send_service_nonexistent_error): set the sender
on the service nonexistent error
* bus/driver.c (bus_driver_handle_acquire_service): set the
sender on the AcquireService reply
* test/data/valid-config-files/debug-allow-all.conf.in: Make test
server also listen on a UNIX socket so services can connect to it.
2003-04-06 Havoc Pennington <hp@pobox.com>
* dbus/dbus-threads.c: Redo how the fake debug mutexes are done
so it detects deadlocks and also we actually init threads when
debugging.
2003-04-06 Havoc Pennington <hp@pobox.com>
* dbus/dbus-server-unix.c (_dbus_server_new_for_domain_socket):
save the domain socket name, and unlink it when we disconnect the
server. Means that at least when we exit normally, we won't leave
a bunch of junk in /tmp
* dbus/dbus-transport-unix.c
(_dbus_transport_new_for_domain_socket): code cleanup (nicer
memory management). (I was making a real change here but then
didn't)
2003-04-06 Havoc Pennington <hp@pobox.com>
* bus/bus.c (bus_context_new): fix wrong handling of
server_data_slot_unref() in the error case.
* dbus/dbus-internals.h (_dbus_assert): change so it passes
"(condition) != 0" to _dbus_real_assert so that
"_dbus_assert (pointer)" doesn't cause a warning
* bus/main.c (main): accept --print-address option to print out
the message bus address
* dbus/dbus-sysdeps.c (_dbus_generate_random_ascii): export this
* dbus/dbus-transport.c (_dbus_transport_open): special error for
"tmpdir" option to unix: address on client side
* dbus/dbus-server.c (dbus_server_listen): handle "tmpdir" option
to unix: address
* configure.in (TEST_SOCKET_DIR): locate a temporary directory
we can use to create sockets in the test suite.
* bus/main.c (signal_handler): on SIGTERM, exit the daemon
cleanly. To be used for testing.
* dbus/dbus-spawn.c (babysit): use _dbus_set_signal_handler()
* dbus/dbus-sysdeps.c (_dbus_set_signal_handler): new
* dbus/dbus-server-debug-pipe.c (_dbus_transport_debug_pipe_new):
handle trying to call this when there's no servers active
2003-04-05 Havoc Pennington <hp@pobox.com>
* NEWS: update
* configure.in: 0.8
2003-04-05 Havoc Pennington <hp@pobox.com>
* bus/bus.c (setup_server): fix this so dbus-daemon-1 doesn't
crash on startup. Need to get "try starting the daemon"
in the test suite I guess. ;-)
* dbus/dbus-server.h, dbus/dbus-server.c: remove the stuff that
tracked the number of open connections; it's better done in
application-specific code as you want it to span all servers etc.
2003-04-05 Havoc Pennington <hp@pobox.com>
* bus/Makefile.am (install-data-hook): add missing DESTDIR,
patch from Colin Walters
2003-04-05 Havoc Pennington <hp@pobox.com>
* doc/config-file.txt (Elements): fix docs of <auth> to reflect
reality; in fact multiple mechanisms are allowed.
* dbus/dbus-internals.c (_dbus_real_assert)
(_dbus_real_assert_not_reached): move guts of _dbus_assert() and
_dbus_assert_not_reached() into functions, so that they don't show
up in basic block counts for test coverage, and don't use up as
much disk space. Does mean slower execution speed though, so
assumes --disable-asserts is the normal production case.
2003-04-05 Havoc Pennington <hp@pobox.com>
* test/Makefile.am (dist-hook): also dist *.in files
* NEWS: update
* configure.in: 0.7
2003-04-05 Havoc Pennington <hp@pobox.com>
* dbus/dbus-string.c: docs warning
* dbus/dbus-spawn.c: missing docs
* dbus/dbus-memory.c (struct ShutdownClosure): missing docs
2003-04-05 Havoc Pennington <hp@pobox.com>
* bus/loop.c (bus_loop_iterate): fix the timeout code, using
magic from GLib
* dbus/dbus-spawn.c (_dbus_babysitter_unref): set sitter_pid
to -1 once we've reaped the babysitter
(_dbus_babysitter_handle_watch): do as much work as we can, not
just one go of it
* bus/activation.c: add code using DBusBabysitter so that we
handle it when a service fails to start up properly.
(bus_activation_service_created): don't remove the activation
entries as we go, just let them get removed when we free the pending
activation. Unref reply messages after sending them.
2003-04-05 Havoc Pennington <hp@pobox.com>
* test/decode-gcov.c (main): print per-directory stats in the report
* Makefile.am (coverage-report.txt): don't include test/* in gcov stats
2003-04-05 Havoc Pennington <hp@pobox.com>
* Makefile.am (coverage-report.txt): add target "coverage-report.txt"
* test/decode-gcov.c: hack up a little program to suck data
out of gcov files. Yes this is sort of silly.
* configure.in: define something in config.h and do an
AM_CONDITIONAL when gcov is enabled
2003-04-04 Havoc Pennington <hp@redhat.com>
* dbus/dbus-spawn.c, dbus/dbus-spawn.h: Change dbus_spawn to
return a "babysitter" object that is used to monitor the status of
the spawned process and reap it when required.
* test/test-segfault.c, test/test-exit.c,
test/test-sleep-forever.c: binaries that do various lame things,
used in the test suite.
* dbus/dbus-sysdeps.c: kill _dbus_errno_to_string()
2003-04-03 Havoc Pennington <hp@pobox.com>
* dbus/dbus-spawn.c: Move dbus-spawn into a separate file
in preparation for modifying it, dbus-sysdeps is getting
a bit unmanageable.
2003-04-03 Havoc Pennington <hp@redhat.com>
* bus/loop.h, bus/loop.c: make the mainloop an object so we can
have multiple ones
* bus/*.[hc]: adapt to mainloop change
2003-04-03 Havoc Pennington <hp@redhat.com>
* bus/activation.c (load_directory): fix up memleaks
(bus_activation_entry_free): free the entry
* dbus/dbus-bus.c (dbus_bus_acquire_service): return an error if
we get one from the message bus; fix memleaks.
* dbus/dbus-message.c (dbus_set_error_from_message): new function
2003-04-03 Havoc Pennington <hp@pobox.com>
* bus/config-parser.c (bus_config_parser_unref): free
list of mechanisms, bug discovered by test suite enhancements
(putting system.conf and session.conf into suite)
* test/Makefile.am, test/test-service.c: add placeholder for a
test service that we'll activate as part of test suite. Doesn't
do anything yet.
* dbus/dbus-sysdeps.c (_dbus_setenv): support unsetenv by
setting NULL value, and use system malloc not dbus_malloc()
when we have unavoidable memleakage.
* dbus/dbus-bus.c (dbus_bus_get): fix bug where bus type of 0
didn't work, and support DBUS_BUS_ACTIVATION.
* bus/activation.c (child_setup): pass our well-known bus type to
the child
* bus/config-parser.c: support <type> to specify well-known type
* doc/dbus-specification.sgml: document the env variables to
locate well-known buses and find service activator
2003-04-02 Havoc Pennington <hp@redhat.com>
* test/Makefile.am (all-local): add a rule to copy tests to
builddir, so we can have generated tests. Use this to remove the
silly hack for testing system.conf and session.conf. Will use this
shortly to generate .service files pointing to test binaries.
2003-04-02 Havoc Pennington <hp@redhat.com>
* dbus/dbus-string.c (set_length): fix a bug - we allocated max of
current alloc and needed new length, not max of the doubled
allocation and needed new length. Also, when building tests,
don't do the double-allocation stuff, just realloc every time.
2003-04-02 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.c (_dbus_file_get_contents): include filenames
in error messages
(_dbus_string_get_dirname): new
(_dbus_sysdeps_test): new
(_dbus_directory_open): include dirnames in error messages
* bus/config-parser.c: interpret <include> and <includedir> and
<servicedir> relative to config file location if the given
filename is not absolute.
* dbus/dbus-string.c (_dbus_string_find_byte_backward): new
2003-04-02 Havoc Pennington <hp@redhat.com>
* bus/connection.c (bus_transaction_send_error_reply): set sender
service for the error, and unref the reply on success
* bus/activation.c: convert to use BusTransaction so OOM can be
handled correctly
(bus_activation_service_created): set sender of the message
2003-04-01 Havoc Pennington <hp@redhat.com>
* bus/config-parser.c, bus/bus.c: implement <servicedir> and
<includedir> (at least mostly)
* dbus/dbus-sysdeps.c (_dbus_change_identity): set the group ID
first, then the user ID
2003-04-01 Havoc Pennington <hp@pobox.com>
* dbus/dbus-server.c (dbus_server_set_auth_mechanisms): new
function
* dbus/dbus-auth.c (_dbus_auth_set_mechanisms): new
* dbus/dbus-internals.c (_dbus_dup_string_array): new function
* dbus/dbus-sysdeps.c (_dbus_listen_unix_socket): chmod the
socket 0777, and unlink any existing socket.
* bus/bus.c (bus_context_new): change our UID/GID and fork if
the configuration file so specifies; set up auth mechanism
restrictions
* bus/config-parser.c (bus_config_parser_content): add support
for <fork> option and fill in code for <auth>
* bus/system.conf.in: add <fork/> to default configuration,
and limit auth mechanisms to EXTERNAL
* doc/config-file.txt (Elements): add <fork>
* dbus/dbus-sysdeps.c (_dbus_become_daemon): new function
(_dbus_change_identity): new function
2003-03-31 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.c (_dbus_connect_unix_socket)
(_dbus_listen_unix_socket): fix off-by-one error in null
termination spotted by Nalin
2003-03-31 Havoc Pennington <hp@redhat.com>
* dbus/dbus-keyring.c (_dbus_keyring_new_homedir): allow setting
DBUS_TEST_HOMEDIR when tests are enabled, so we can test without
having a real home directory available.
2003-03-31 Havoc Pennington <hp@redhat.com>
* bus/Makefile.am (install-data-hook): create /var/run/dbus
* bus/messagebus.in: add init script for Red Hat /etc/init.d
* configure.in: add support for specifying a style of init script
to install
2003-03-31 Havoc Pennington <hp@redhat.com>
Fix some annoying DBusString API and fix all affected code.
* dbus/dbus-string.c (_dbus_string_init): get rid of annoying
max_length argument
(_dbus_string_get_data): change to return string instead of using
an out param
(_dbus_string_get_const_data): ditto
(_dbus_string_get_data_len): ditto
(_dbus_string_get_const_data_len): ditto
2003-03-31 Havoc Pennington <hp@redhat.com>
* bus/main.c (main): fix up the command line arguments to be nicer
2003-03-31 Havoc Pennington <hp@redhat.com>
* dbus/Makefile.am (INCLUDES): use EXPANDED_LOCALSTATEDIR to
define DBUS_SYSTEM_BUS_PATH as we want to compile in the same
final location that lands in the config file
* bus/config-loader-expat.c (bus_config_load): fix type of
XML_Parser variable
* doc/TODO: remove TODO item for dbus_bus_get()
* dbus/dbus-bus.c (bus_data_free): add missing lock/unlock
2003-03-31 Havoc Pennington <hp@pobox.com>
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_domain_socket)
(_dbus_transport_new_for_tcp_socket): these didn't need the "server"
argument since they are always client side
* dbus/dbus-server.c (dbus_server_get_address): new function
* bus/main.c (main): take the configuration file as an argument.
* test/data/valid-config-files/debug-allow-all.conf: new file to
use with dispatch.c tests for example
* bus/test-main.c (main): require test data dir
* bus/bus.c (bus_context_new): change this to take a
configuration file name as argument
* doc/config-file.txt (Elements): add <servicedir>
* bus/system.conf, bus/session.conf: new files
* dbus/dbus-bus.c (dbus_bus_get): look for system bus on
well-known socket if none set
* configure.in: create system.conf and session.conf
2003-03-30 Havoc Pennington <hp@pobox.com>
* bus/config-parser.c: hacking
* dbus/dbus-memory.c: don't use DBusList for the list of stuff
to shut down, since it could cause weirdness with the DBusList
lock
* dbus/dbus-list.c (_dbus_list_test): add tests for the
link-oriented stack routines
(alloc_link): free the mempool if the first alloc from it fails
* dbus/dbus-mempool.c (struct DBusMemBlock): fix alignment issue
* dbus/dbus-string.c (UNICODE_VALID): sync new version of this
from GLib
(_dbus_string_skip_white): new
* doc/config-file.txt (Elements): add <includedir>
2003-03-28 Havoc Pennington <hp@pobox.com>
* dbus/dbus-string.c (_dbus_string_copy_data_len)
(_dbus_string_copy_data): new functions
2003-03-28 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-bus.c: (bus_data_free), (dbus_bus_get):
* dbus/dbus-bus.h:
Add dbus_bus_get.
* dbus/dbus-memory.c:
Fix a doc comment.
2003-03-28 Havoc Pennington <hp@pobox.com>
* bus/test.c (bus_test_flush_bus): remove the sleep from here,
I think it may have just been superstition. Not sure.
* dbus/dbus-string.c (_dbus_string_base64_decode): catch some OOM
failures that were not being handled.
* dbus/dbus-auth.c (process_auth): fix a memleak in OOM handling
* dbus/dbus-memory.c: add ability to set number of mallocs in a
row that will fail on out-of-memory.
* dbus/dbus-internals.c (_dbus_test_oom_handling): convenience
function for testing out-of-memory handling.
* bus/config-loader-expat.c (memsuite): don't wrap the dbus
allocation functions, they do map exactly to the expat ones.
2003-03-27 Havoc Pennington <hp@redhat.com>
* bus/config-loader-libxml.c (bus_config_load): add another error
check
2003-03-26 Anders Carlsson <andersca@codefactory.se>
* doc/TODO:
Add note about automatic service activation.
* doc/dbus-specification.sgml:
Rename the specification and clarify a few things.
2003-03-26 Anders Carlsson <andersca@codefactory.se>
* Doxyfile.in:
* dbus/dbus-address.c:
* dbus/dbus-dict.c:
* dbus/dbus-marshal.c:
* dbus/dbus-server-debug-pipe.c:
* dbus/dbus-transport-unix.c:
Fix documentation warnings.
2003-03-26 Havoc Pennington <hp@pobox.com>
* bus/test-main.c, dbus/dbus-test.c (main): check memleaks
after every test so it's quick and easy to see which leaked, and
so we test multiple dbus_shutdown() calls
* configure.in: change configure.in XML stuff to also support
expat
* config-loader-libxml.c: some hacking
* config-loader-expat.c: some hacking
* config-parser.c: some hacking, plus tests
2003-03-25 Havoc Pennington <hp@redhat.com>
* throughout - add more _DBUS_ASSERT_ERROR_IS_CLEAR
* configure.in: add --with-xml option to specify XML library,
right now only libxml is supported.
* bus/config-loader-libxml.c, config-parser.c: sync some minor
nonworking code between home and work, still just stubs
2003-03-24 Havoc Pennington <hp@redhat.com>
* dbus/dbus-sysdeps.c (_dbus_set_fd_nonblocking): move to this
file
* dbus/dbus-errors.c (dbus_set_error, dbus_set_error_const): allow
NULL argument for "message" if the error is a well-known one,
fill in a generic message in this case.
* dbus/dbus-errors.h (DBusResultCode): Kill DBusResultCode in
favor of DBusError
* bus/test.c (bus_test_flush_bus): add
* bus/policy.c (bus_policy_test): test code stub
2003-03-24 Havoc Pennington <hp@pobox.com>
* bus/connection.c (bus_connections_setup_connection): set up
the "can this user connect" function, but it always returns
TRUE until we have a config file parser so we can have a config
file that allows connections.
2003-03-23 Havoc Pennington <hp@pobox.com>
* dbus/dbus-threads.c (dbus_mutex_new, dbus_condvar_new): with
DBUS_BUILD_TESTS, actually alloc/free a block of memory for
the mutex, so we can check for proper memory management
and OOM handling.
* dbus/dbus-dataslot.c: remove the mutex from
DBusDataSlotAllocator and lock it manually when using it,
to simplify fitting it into the global slots framework.
* dbus/dbus-threads.c (init_static_locks): rework how we're
handling global locks so they are easily shut down.
* bus/policy.c (bus_policy_append_rule): fix
* bus/test-main.c (main): check for memleaks
* dbus/dbus-test.c (dbus_internal_do_not_use_run_tests): make
test suite check for memleaks
* dbus/dbus-memory.c: add support in test mode for tracking
number of outstanding blocks
2003-03-23 Havoc Pennington <hp@pobox.com>
* bus/policy.c, bus/bus.c, bus/connection.c: implement allow/deny
policies code
* dbus/dbus-hash.h: add ULONG hash keys
* dbus/dbus-sysdeps.c (_dbus_get_groups): new
(_dbus_get_group_id): new function
2003-03-20 Havoc Pennington <hp@redhat.com>
* dbus/dbus-connection.c (dbus_connection_set_unix_user_function):
new function
(dbus_connection_get_unix_user): new function
2003-03-20 Havoc Pennington <hp@pobox.com>
* bus/connection.c (bus_connection_send_oom_error): assert that
message has a sender
(connection_execute_transaction): ditto
(bus_connection_preallocate_oom_error): fix to set the sender, and
set recipient to the destination service, not the bus driver
* bus/policy.c: hacking
* dbus/dbus-message.c (dbus_message_service_is): new function
(dbus_message_sender_is): new
2003-03-19 Havoc Pennington <hp@redhat.com>
* bus/policy.c: start sketching code for policy restrictions on
what connections can do.
2003-03-18 Havoc Pennington <hp@redhat.com>
* doc/TODO: some notes on high-level todo items. Little nitpick
stuff is all in @todo, so no need to add it here.
* doc/config-file.txt: some notes on how config file might look
2003-03-18 Anders Carlsson <andersca@codefactory.se>
* configure.in: 0.6
* NEWS: Update.
2003-03-17 Havoc Pennington <hp@redhat.com>
* dbus/dbus-internals.h: add gcc attributes so that
our printf-style functions warn on bad arguments to
format
* dbus/dbus-sysdeps.c (_dbus_connect_tcp_socket): fix printf
format bug
* dbus/dbus-message.c (_dbus_message_loader_queue_messages): fix
printf format bug
2003-03-17 Havoc Pennington <hp@redhat.com>
* bus/test-main.c (main): make it print something as it runs
so make check doesn't look stuck
* doc/negotiation.txt, doc/dbus-sasl-profile.txt: remove
from CVS, now obsolete
2003-03-17 Anders Carlsson <andersca@codefactory.se>
* bus/dispatch.c: (bus_dispatch):
Refetch the service name since it may have been reallocated
when dbus_message_set_sender was called.
* dbus/dbus-sysdeps.c: (_dbus_accept):
Add address and address length variables and use them to stop
valgrind from complaining.
2003-03-17 Havoc Pennington <hp@pobox.com>
All tests pass, no memleaks, no valgrind complaints.
* bus/test.c: refcount handler_slot
* bus/connection.c (bus_connections_new): refcount
connection_data_slot
* dbus/dbus-auth-script.c (_dbus_auth_script_run): delete unused
bytes so that auth scripts pass.
* bus/dispatch.c: init message_handler_slot so it gets allocated
properly
* bus/dispatch.c (message_handler_slot_ref): fix memleak
* dbus/dbus-server-debug-pipe.c (_dbus_server_debug_pipe_new):
dealloc server_pipe_hash when no longer used for benefit of
leak checking
* dbus/dbus-auth.c (process_command): memleak fix
* bus/dispatch.c (check_hello_message): memleak fix
2003-03-16 Havoc Pennington <hp@pobox.com>
* dbus/dbus-bus.c (ensure_bus_data): fix double-unref of the data slot
2003-03-17 Anders Carlsson <andersca@codefactory.se>
* bus/activation.c (bus_activation_activate_service): Append
the pending activation entry to the list of pending activations.
2003-03-16 Havoc Pennington <hp@pobox.com>
* bus/dispatch.c (bus_dispatch_test): remove double-unrefs of
connections
* dbus/dbus-address.c (create_entry): fix OOM handling when
failing to alloc entry->method
2003-03-16 Havoc Pennington <hp@pobox.com>
* dbus/dbus-watch.c (_dbus_watch_new): handle failure to malloc
the watch
* dbus/dbus-server-debug-pipe.c (_dbus_transport_debug_pipe_new):
add some missing dbus_set_result
* bus/dispatch.c (bus_dispatch_add_connection): handle failure to
alloc the DBusMessageHandler
* dbus/dbus-transport.c (_dbus_transport_disconnect): don't ref
the transport here, since we call this from the finalizer; it
resulted in a double-finalize.
* dbus/dbus-transport.c (_dbus_transport_disconnect): fix a bug
where we tried to use transport->connection that was NULL,
happened when transport was disconnected early on due to OOM
* bus/*.c: adapt to handle OOM for watches/timeouts
* dbus/dbus-transport-unix.c: port to handle OOM during
watch handling
* dbus/dbus-auth.c (_dbus_auth_get_unused_bytes): return a
reference to unused bytes instead of a copy
* dbus/dbus-server.c (dbus_server_handle_watch): return FALSE for
out of memory
* dbus/dbus-connection.c (dbus_connection_handle_watch): return
FALSE on OOM
* dbus/dbus-timeout.c (dbus_timeout_handle): return FALSE for out
of memory
2003-03-16 Anders Carlsson <andersca@codefactory.se>
* doc/dbus-specification.sgml:
Document reply message for ActivateService.
2003-03-16 Anders Carlsson <andersca@codefactory.se>
* bus/activation.c: (bus_pending_activation_entry_free),
(bus_pending_activation_free), (bus_activation_new),
(bus_activation_unref), (bus_activation_service_created),
(bus_activation_activate_service):
* bus/activation.h:
* bus/bus.c: (bus_context_new):
* bus/desktop-file.c: (new_section):
* bus/driver.c: (bus_driver_send_service_deleted),
(bus_driver_handle_activate_service):
* bus/services.c: (bus_registry_new), (bus_registry_ensure):
* bus/services.h:
* dbus/dbus-connection.c:
(dbus_connection_send_with_reply_and_block):
* dbus/dbus-message.c: (dbus_message_append_args_valist):
* dbus/dbus-protocol.h:
Make activation work better. Now pending activations will be queued
and the daemon won't try to activate services that are already registered.
2003-03-16 Havoc Pennington <hp@pobox.com>
* dbus/dbus-bus.c (ensure_bus_data): handle failure to set
connection data
* dbus/dbus-memory.c (_dbus_initialize_malloc_debug): support
DBUS_MALLOC_BACKTRACES to print trace when failing an alloc
2003-03-16 Havoc Pennington <hp@pobox.com>
* dbus/dbus-string.c (_dbus_string_validate_utf8): oops, unbreak
this. always run the test suite before commit...
* bus/*: adapt to DBusConnection API changes
* glib/dbus-gmain.c: adapt to DBusConnection API changes,
requires renaming stuff to avoid dbus_connection_dispatch name
conflict.
* dbus/dbus-transport.c (_dbus_transport_queue_messages): new
function
* dbus/dbus-message.c (_dbus_message_loader_queue_messages):
separate from _dbus_message_loader_return_buffer()
* dbus/dbus-connection.c (dbus_connection_get_n_messages): remove
this, because it's now always broken to use; the number of
messages in queue vs. the number still buffered by the message
loader is undefined/meaningless. Should use
dbus_connection_get_dispatch_state().
(dbus_connection_dispatch): rename from
dbus_connection_dispatch_message
2003-03-16 Havoc Pennington <hp@pobox.com>
* dbus/dbus-string.c (_dbus_string_validate_utf8): copy in a real
implementation
2003-03-16 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-connection.c:
(dbus_connection_send_with_reply_and_block):
Decrease connection->n_incoming when removing an entry
from the list.
* dbus/dbus-dict.c: (dbus_dict_entry_free),
(dbus_dict_set_boolean_array), (dbus_dict_set_int32_array),
(dbus_dict_set_uint32_array), (dbus_dict_set_double_array),
(dbus_dict_set_byte_array), (dbus_dict_set_string_array),
(dbus_dict_get_boolean_array), (dbus_dict_get_double_array),
(dbus_dict_get_byte_array):
Handle NULL arrays and strings. Also add support for byte arrays.
* dbus/dbus-marshal.c: (_dbus_marshal_byte_array),
(_dbus_marshal_dict), (_dbus_demarshal_byte_array),
(_dbus_demarshal_int32_array), (_dbus_demarshal_uint32_array),
(_dbus_demarshal_double_array), (_dbus_demarshal_string_array),
(_dbus_demarshal_dict), (demarshal_and_validate_len),
(_dbus_marshal_validate_arg), (_dbus_marshal_test):
* dbus/dbus-marshal.h:
Add support for marshalling and demarshalling empty arrays and strings.
* dbus/dbus-message.c: (dbus_message_append_args_valist),
(dbus_message_append_string_array),
(dbus_message_iter_get_boolean),
(dbus_message_iter_get_boolean_array),
(dbus_message_iter_get_int32_array),
(dbus_message_iter_get_uint32_array),
(dbus_message_iter_get_double_array),
(dbus_message_iter_get_byte_array),
(dbus_message_iter_get_string_array), (dbus_message_iter_get_dict),
(check_message_handling):
Add support for getting empty arrays and dicts.
* dbus/dbus-string.c: (_dbus_string_validate_utf8):
Don't do any validation at all for now, that's better than just checking
for ASCII.
* test/data/valid-messages/emptiness.message:
New test message with lots of empty arrays.
2003-03-16 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c
(_dbus_connection_queue_received_message_link): new function that
can't fail due to OOM
* dbus/dbus-message.c (_dbus_message_loader_pop_message_link):
new function pops a message together with a list link
containing it.
* dbus/dbus-transport-unix.c (queue_messages): use new link-based
message queuing functions to avoid needing to alloc memory
2003-03-16 Havoc Pennington <hp@pobox.com>
Oops - test code was only testing failure of around 30 of the
mallocs in the test path, but it turns out there are 500+
mallocs. I believe this was due to misguided linking setup such
that there was one copy of dbus_malloc etc. in the daemon and one
in the shared lib, and only daemon mallocs were tested. In any
case, the test case now tests all 500+ mallocs, and doesn't pass
yet, though there are lots of fixes in this patch.
* dbus/dbus-connection.c (dbus_connection_dispatch_message): fix
this so that it doesn't need to allocate memory, since it
has no way of indicating failure due to OOM (and would be
annoying if it did).
* dbus/dbus-list.c (_dbus_list_pop_first_link): new function
* bus/Makefile.am: rearrange to create two self-contained
libraries, to avoid having libraries with overlapping symbols.
that was resulting in weirdness, e.g. I'm pretty sure there
were two copies of global static variables.
* dbus/dbus-internals.c: move the malloc debug stuff to
dbus-memory.c
* dbus/dbus-list.c (free_link): free list mempool if it becomes
empty.
* dbus/dbus-memory.c (_dbus_disable_mem_pools): new function
* dbus/dbus-address.c (dbus_parse_address): free list nodes
on failure.
* bus/dispatch.c (bus_dispatch_add_connection): free
message_handler_slot when no longer using it, so
memory leak checkers are happy for the test suite.
* dbus/dbus-server-debug-pipe.c (debug_finalize): free server name
* bus/bus.c (new_connection_callback): disconnect in here if
bus_connections_setup_connection fails.
* bus/connection.c (bus_connections_unref): fix to free the
connections
(bus_connections_setup_connection): if this fails, don't
disconnect the connection, just be sure there are no side
effects.
* dbus/dbus-string.c (undo_alignment): unbreak this
* dbus/dbus-auth.c (_dbus_auth_unref): free some stuff we were
leaking
(_dbus_auth_new): fix the order in which we free strings
on OOM failure
* bus/connection.c (bus_connection_disconnected): fix to
not send ServiceDeleted multiple times in case of memory
allocation failure
* dbus/dbus-bus.c (dbus_bus_get_base_service): new function to
get the base service name
(dbus_bus_register_client): don't return base service name,
instead store it on the DBusConnection and have an accessor
function for it.
(dbus_bus_register_client): rename dbus_bus_register()
* bus/dispatch.c (check_hello_message): verify that other
connections on the bus also got the correct results, not
just the one sending hello
2003-03-15 Havoc Pennington <hp@pobox.com>
Make it pass the Hello handling test including all OOM codepaths.
Now to do other messages...
* bus/services.c (bus_service_remove_owner): fix crash when
removing owner from an empty list of owners
(bus_registry_ensure): don't leave service in the list of
a connection's owned services if we fail to put the service
in the hash table.
* bus/connection.c (bus_connection_preallocate_oom_error): set
error flag on the OOM error.
* dbus/dbus-connection.c (_dbus_connection_new_for_transport):
handle _dbus_transport_set_connection failure
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_fd): modify
to create watches up front and simply enable/disable them as
needed.
(unix_connection_set): this can now fail on OOM
* dbus/dbus-timeout.c, dbus/dbus-watch.c: add concept
of enabling/disabling a watch or timeout.
* bus/loop.c (bus_loop_iterate): don't touch disabled
watches/timeouts
* glib/dbus-gmain.c: adapt to enable/disable watches and timeouts
2003-03-15 Havoc Pennington <hp@pobox.com>
* bus/dispatch.c (bus_dispatch_test): OK, now finally actually
write useful test code, after all that futzing around ;-)
Test does not yet pass because we can't handle OOM in
_dbus_transport_messages_pending (basically,
dbus_connection_preallocate_send() does not prealloc the write
watch). To fix this, I think we need to add new stuff to
set_watch_functions, namely a SetEnabled function so we can alloc
the watch earlier, then enable it later.
* dbus/Makefile.am (libdbus_convenience_la_SOURCES): move
dbus-memory.c to the convenience lib
* bus/test.c: rename some static functions to keep them clearly
distinct from stuff in connection.c. Handle client disconnection.
2003-03-14 Havoc Pennington <hp@pobox.com>
* bus/dispatch.c (bus_dispatch_test): do test using debug-pipe
transport, tests more of the real codepath. Set up clients
with bus_setup_debug_client.
* bus/test.c (bus_setup_debug_client): function to set up debug
"clients" on the main loop
* dbus/dbus-transport.c (_dbus_transport_open): add debug-pipe
support
* dbus/dbus-server.c (dbus_server_listen): add debug-pipe
server type
* dbus/dbus-server-debug.c: support a debug server based on pipes
* dbus/dbus-sysdeps.c (_dbus_full_duplex_pipe): new function
(_dbus_close): new function
* configure.in: check for socketpair
2003-03-14 Havoc Pennington <hp@redhat.com>
* dbus/dbus-memory.c: add a "detect buffer overwrites on free"
cheesy hack
* dbus/dbus-transport-debug.c: rework this a good bit to be
less complicated. hopefully still works.
* dbus/dbus-server-debug.c (handle_new_client): remove timeout
manually
* glib/dbus-gmain.c (timeout_handler): don't remove timeout
after running it
* dbus/dbus-message.c (dbus_message_copy): rename from
dbus_message_new_from_message, fix it up to copy
all the message fields, add test case
* bus/dispatch.c (bus_dispatch_test): add some more test code,
not quite passing yet
2003-03-14 Havoc Pennington <hp@pobox.com>
* bus/loop.c (bus_loop_iterate): add this so we can "run loop
until no work remains" in test code. (the large diff here
is just code movement, no actual changes)
* dbus/dbus-server-debug.c (DEFAULT_INTERVAL): change interval to
1, no point waiting around for test code.
(_dbus_server_debug_accept_transport): unref the timeout
after adding it (right?)
* dbus/dbus-transport-debug.c (DEFAULT_INTERVAL): ditto
2003-03-13 Havoc Pennington <hp@redhat.com>
* dbus/dbus-timeout.c (_dbus_timeout_list_set_functions): handle
out of memory
* dbus/dbus-watch.c (_dbus_watch_list_set_functions): handle out
of memory
* dbus/dbus-connection.h: Make AddWatchFunction and
AddTimeoutFunction return a bool so they can fail on out-of-memory
* bus/bus.c (bus_context_new): set up timeout handlers
* bus/connection.c (bus_connections_setup_connection): set up
timeout handlers
* glib/dbus-gmain.c: adapt to the fact that set_functions stuff
can fail
* bus/bus.c (bus_context_new): adapt to changes
* bus/connection.c: adapt to changes
* test/watch.c: adapt to DBusWatch changes
* bus/dispatch.c (bus_dispatch_test): started adding this but
didn't finish
2003-03-14 Anders Carlsson <andersca@codefactory.se>
* bus/dispatch.c (send_service_nonexistent_error): Fix typo.
2003-03-13 Havoc Pennington <hp@pobox.com>
* bus/test.c, bus/test.h, bus/Makefile.am, bus/test-main.c:
set up a test framework as for the library
2003-03-12 Havoc Pennington <hp@pobox.com>
Throughout: purge global variables, introduce BusActivation,
BusConnections, BusRegistry, etc. objects instead.
* bus/bus.h, bus/bus.c: introduce BusContext as a global
message bus object
* test/Makefile.am (TEST_BINARIES): disable bus-test for now,
going to redo this a bit differently I think
2003-03-12 Havoc Pennington <hp@redhat.com>
Mega-patch that gets the message bus daemon initially handling
out-of-memory. Work still needed. Also lots of random
moving stuff to DBusError instead of ResultCode.
* dbus/dbus-list.c (_dbus_list_length_is_one): new function
* dbus/dbus-connection.c
(dbus_connection_send_with_reply_and_block): use DBusError
* dbus/dbus-bus.c: adapt to API changes, make it use DBusError not
DBusResultCode
* dbus/dbus-connection.c (dbus_connection_send): drop the result
code here, as the only failure possible is OOM.
* bus/connection.c (bus_connection_disconnect):
rename bus_connection_disconnected as it's a notification only
* bus/driver.c (bus_driver_handle_acquire_service): don't free
"name" on get_args failure, should be done by get_args;
don't disconnect client for bad args, just return an error.
(bus_driver_handle_service_exists): ditto
* bus/services.c (bus_services_list): NULL-terminate returned array
* bus/driver.c (bus_driver_send_service_lost)
(bus_driver_send_service_acquired): send messages from driver to a
specific client to the client's unique name, not to the broadcast
service.
* dbus/dbus-message.c (decode_header_data): reject messages that
contain no name field
(_dbus_message_get_client_serial): rename to
dbus_message_get_serial and make public
(_dbus_message_set_serial): rename from set_client_serial
(_dbus_message_set_reply_serial): make public
(_dbus_message_get_reply_serial): make public
* bus/connection.c (bus_connection_foreach): allow stopping
iteration by returning FALSE from foreach function.
* dbus/dbus-connection.c (dbus_connection_send_preallocated)
(dbus_connection_free_preallocated_send)
(dbus_connection_preallocate_send): new API for sending a message
without possibility of malloc failure.
(dbus_connection_send_message): rename to just
dbus_connection_send (and same for whole function family)
* dbus/dbus-errors.c (dbus_error_free): make this reinit the error
* dbus/dbus-sysdeps.c (_dbus_exit): new function
* bus/activation.c: handle/return errors
* dbus/dbus-errors.h: add more DBUS_ERROR #define
* dbus/dbus-sysdeps.c (_dbus_directory_open) (_dbus_file_get_contents)
(_dbus_directory_get_next_file): use DBusError instead of DBusResultCode
(_dbus_result_from_errno): move to this file
2003-03-10 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-marshal.c:
(_dbus_marshal_set_string):
Take a length argument so we can marshal the correct string
length.
(_dbus_marshal_dict), (_dbus_demarshal_dict),
(_dbus_marshal_get_arg_end_pos), (_dbus_marshal_validate_arg),
(_dbus_marshal_test):
* dbus/dbus-marshal.h:
Add support for marshalling and demarshalling dicts.
* dbus/dbus-message-builder.c: (_dbus_message_data_load):
Add support for TYPE DICT.
* dbus/dbus-message.c: (set_string_field):
Adjust header padding.
(dbus_message_append_args_valist), (dbus_message_append_dict),
(dbus_message_get_args_valist), (dbus_message_iter_get_arg_type),
(dbus_message_iter_get_dict), (_dbus_message_loader_return_buffer),
(check_message_handling), (check_have_valid_message):
* dbus/dbus-message.h:
Add functions for setting and getting dicts.
* dbus/dbus-protocol.h:
Add DBUS_TYPE_DICT.
* dbus/dbus.h:
Add dbus-dict.h
* doc/dbus-specification.sgml:
Add information about how dicts are marshalled.
* test/data/invalid-messages/dict-with-nil-value.message:
* test/data/invalid-messages/too-short-dict.message:
* test/data/valid-messages/dict-simple.message:
* test/data/valid-messages/dict.message:
Add sample messages containing dicts.
2003-03-08 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-dict.h: Add DBUS_END_DECLS.
2003-03-07 Anders Carlsson <andersca@codefactory.se>
* dbus/Makefile.am:
* dbus/dbus-dict.c: (dbus_dict_entry_free), (dbus_dict_new),
(dbus_dict_get_keys), (insert_entry), (dbus_dict_set_boolean),
(dbus_dict_set_int32), (dbus_dict_set_uint32),
(dbus_dict_set_double), (dbus_dict_set_string),
(dbus_dict_set_boolean_array), (dbus_dict_set_int32_array),
(dbus_dict_set_uint32_array), (dbus_dict_set_double_array),
(dbus_dict_set_string_array), (_dbus_dict_test):
* dbus/dbus-dict.h:
Fix according to comments from Havoc.
2003-03-06 Michael Meeks <michael@server.home>
* configure.in: if we don't have kde-config, disable have_qt.
2003-03-07 Anders Carlsson <andersca@codefactory.se>
* dbus/Makefile.am:
Add dbus-dict.[ch]
* dbus/dbus-dict.c: (dbus_dict_entry_free), (dbus_dict_new),
(dbus_dict_ref), (dbus_dict_unref), (dbus_dict_contains),
(dbus_dict_remove), (dbus_dict_get_value_type),
(dbus_dict_get_keys), (dbus_dict_put_boolean),
(dbus_dict_put_int32), (dbus_dict_put_uint32),
(dbus_dict_put_double), (dbus_dict_put_string),
(dbus_dict_put_boolean_array), (dbus_dict_put_int32_array),
(dbus_dict_put_uint32_array), (dbus_dict_put_double_array),
(dbus_dict_put_string_array), (dbus_dict_get_boolean),
(dbus_dict_get_int32), (dbus_dict_get_uint32),
(dbus_dict_get_double), (dbus_dict_get_string),
(dbus_dict_get_boolean_array), (dbus_dict_get_int32_array),
(dbus_dict_get_uint32_array), (dbus_dict_get_double_array),
(dbus_dict_get_string_array), (_dbus_dict_test):
* dbus/dbus-dict.h:
Add DBusDict implementation
* dbus/dbus-test.c: (dbus_internal_do_not_use_run_tests):
* dbus/dbus-test.h:
Add _dbus_dict_test
2003-03-04 Havoc Pennington <hp@pobox.com>
* test/data/auth/*: adapt to changes
* dbus/dbus-auth-script.c (_dbus_auth_script_run): add
USERID_BASE64 and change USERNAME_BASE64 to put in username not
userid
* dbus/dbus-keyring.c (_dbus_keyring_validate_context): prevent
more stuff from being in a context name, to make the protocol
simpler to deal with
* dbus/dbus-errors.c (dbus_error_has_name): new function
(dbus_error_is_set): new function
* dbus/dbus-auth.c: replace DBUS_STUPID_TEST_MECH auth
with DBUS_COOKIE_SHA1, implement DBUS_COOKIE_SHA1
* dbus/dbus-connection.c (dbus_connection_flush): also read
messages during a flush operation
* dbus/Makefile.am: remove dbus-md5 since it isn't currently used.
2003-03-05 Anders Carlsson <andersca@codefactory.se>
* configure.in: Check for gethostbyname on Solaris.
* dbus/dbus-transport.c: (_dbus_transport_open):
Remove duplicate "tcp" entry.
* doc/dbus-specification.sgml:
Clarify some things.
2003-03-05 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-auth.c: (send_rejected), (process_test_subdir):
* dbus/dbus-keyring.c: (_dbus_keyring_new_homedir),
(_dbus_keyring_test):
* dbus/dbus-md5.c: (_dbus_md5_compute):
* dbus/dbus-sha.c: (_dbus_sha_compute):
Plug memory leaks.
2003-03-05 Anders Carlsson <andersca@codefactory.se>
* README: Add some things.
2003-03-04 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-message.c (dbus_message_append_args_valist): Add a break;
after case DBUS_TYPE_BOOELAN.
2003-03-02 Havoc Pennington <hp@pobox.com>
* test/break-loader.c (randomly_set_extreme_ints): add test that
sets really huge and small integers
* dbus/dbus-marshal.c (_dbus_marshal_validate_arg): add check
that length of boolean array fits in the string, and that
string has room for boolean value in single-bool case.
* dbus/dbus-message-builder.c (_dbus_message_data_load): add
optional value to "ALIGN" command which is what to fill the
alignment with.
* test/data/valid-messages/no-padding.message: add regression
test for the message padding problem
2003-03-02 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c (decode_header_data): fix to always init
message_padding, from Benjamin Dauvergne
2003-03-02 Havoc Pennington <hp@pobox.com>
* configure.in: 0.5
* NEWS: Update.
2003-03-01 Joe Shaw <joe@assbarn.com>
* configure.in: Check for "struct cmsgcred" and try to access its
members for BSD-like unices.
* dbus/dbus-sysdeps.c (read_credentials_byte): Fold this back into
_dbus_read_credentials_unix_socket().
(_dbus_read_credentials_unix_socket): Use recvmsg() instead of
read() for reading the credential byte off the unix socket. Use
struct cmsgcred on systems that support it.
2003-02-27 Alexander Larsson <alexl@redhat.com>
* glib/Makefile.am:
* configure.in:
Make gthreads-2.0 dependency optional. Don't build thread test if
its not found.
2003-02-27 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c
(dbus_connection_send_message_with_reply_and_block): fix doh!
doh! doh! bug that resulted in never removing a reply from the
queue, no wonder we called get_reply_serial so much ;-)
* dbus/dbus-message.c (struct DBusMessage): cache reply serial
and client serial instead of demarshaling them every time
2003-02-27 Havoc Pennington <hp@pobox.com>
* dbus/dbus-marshal.c (_dbus_demarshal_int32): rewrite to be much
more inlined, using dbus-string-private.h, speeds things up
substantially
* dbus/dbus-string.c (_dbus_string_free): apply align offset
when freeing the string
(_dbus_string_steal_data): fix for align offset
(undo_alignment): new function
2003-02-26 Havoc Pennington <hp@redhat.com>
All kinds of audit fixes from Owen, plus initial attempt to
handle unaligned memory returned from malloc.
* dbus/dbus-string.c (_dbus_string_init): clamp max length to
leave room for align_offset and nul byte
(fixup_alignment): function to track an align_offset and
ensure real->str is aligned
(DBUS_GENERIC_STRING_PREAMBLE): len must be less than allocated,
to allow a nul byte plus align offset
(_dbus_string_lock): fix overflow issue
(_dbus_string_init_const_len): add assertions on sanity of len,
assign allocated to be ALLOCATION_PADDING larger than len
(set_length): fixup the overflow handling
(_dbus_string_get_data_len): fix overflow in assertion
(open_gap): detect overflow in size of gap to be opened
(_dbus_string_lengthen): add overflow check
(_dbus_string_align_length): fix overflow with _DBUS_ALIGN_VALUE
(_dbus_string_append): add overflow check
(_dbus_string_append_unichar): overflow
(_dbus_string_delete): fix overflow in assertion
(_dbus_string_copy_len): overflow in assertion
(_dbus_string_replace_len): overflows in assertions
(_dbus_string_find): change to implement in terms of
_dbus_string_find_to
(_dbus_string_find_to): assorted fixage
(_dbus_string_equal_c_str): assert c_str != NULL,
fix logic so the function works
(_dbus_string_ends_with_c_str): fix overflow thingy
(_dbus_string_base64_encode): overflow fix
(_dbus_string_validate_ascii): overflow
(_dbus_string_validate_nul): overflow
2003-02-26 Havoc Pennington <hp@redhat.com>
* dbus/dbus-marshal.c (_dbus_marshal_test): fix to work with DISABLE_ASSERTS
2003-02-26 Alexander Larsson <alexl@redhat.com>
* configure.in:
Set DBUS_GLIB_THREADS_LIBS for apps using gthread-2.0
* dbus/dbus-connection.c:
* dbus/dbus-connection.h:
Fix _dbus_connection_acquire_io_path and _dbus_connection_acquire_dispatch.
Add dbus_connection_set_wakeup_main_function and use it when queueing
incoming and outgoing messages.
* dbus/dbus-dataslot.c:
Threadsafe usage of DBusDataSlotAllocator
* dbus/dbus-message.c: (dbus_message_get_args_iter):
dbus_new can fail.
* dbus/dbus-server-unix.c:
Add todo comment
* glib/dbus-gmain.c:
Implement the new wakeup functions for glib.
* glib/Makefile.am:
* glib/test-thread-client.c:
* glib/test-thread-server.c:
* glib/test-thread.h:
Initial cut at some thread test code. Not really done yet.
2003-02-26 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c
(dbus_connection_send_message_with_reply_and_block): fix crash
where we ref'd the outgoing message instead of the returned reply
* dbus/dbus-transport-unix.c (do_authentication): check read watch
at the end of this function, so if we didn't need to read for
authentication, we reinstall it for receiving messages
* dbus/dbus-message.c (dbus_message_new_reply): allow replies to
a NULL sender for peer-to-peer case
* dbus/dbus-transport-unix.c (check_read_watch): handle
!authenticated case correctly
* glib/dbus-gmain.c: add support for DBusServer
* dbus/dbus-server.c: add data slot support
* glib/dbus-gmain.c (dbus_connection_setup_with_g_main): check
return values and handle errors
* dbus/dbus-dataslot.c: factor out the data slot stuff from
DBusConnection
* Doxyfile.in (INPUT): add glib subdir
* glib/dbus-gmain.c (dbus_connection_setup_with_g_main): rename
setup_with_g_main instead of hookup_with_g_main; write docs
2003-02-24 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-marshal.c: (_dbus_marshal_validate_arg):
* dbus/dbus-message-builder.c: (_dbus_message_data_load):
* dbus/dbus-message.c: (dbus_message_append_boolean),
(dbus_message_append_boolean_array),
(dbus_message_get_args_valist), (_dbus_message_test):
* dbus/dbus-message.h:
* doc/dbus-specification.sgml:
Various fixes as pointed out by Havoc.
* test/data/invalid-messages/bad-boolean-array.message:
* test/data/invalid-messages/bad-boolean.message:
Add invalid boolean value test cases.
2003-02-24 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-internals.c: (_dbus_type_to_string):
* dbus/dbus-marshal.c: (_dbus_marshal_get_arg_end_pos),
(_dbus_marshal_validate_arg):
* dbus/dbus-message-builder.c: (_dbus_message_data_load):
* dbus/dbus-message.c: (dbus_message_append_args_valist),
(dbus_message_append_boolean), (dbus_message_append_boolean_array),
(dbus_message_get_args_valist), (dbus_message_iter_get_boolean),
(dbus_message_iter_get_int32), (dbus_message_iter_get_uint32),
(dbus_message_iter_get_double),
(dbus_message_iter_get_boolean_array), (message_iter_test):
* dbus/dbus-message.h:
* dbus/dbus-protocol.h:
* doc/dbus-specification.sgml:
* test/data/valid-messages/lots-of-arguments.message:
Add support for boolean and boolean array types.
2003-02-23 Havoc Pennington <hp@pobox.com>
* dbus/dbus-keyring.c: finish most of this implementation and
simple unit test
* dbus/dbus-errors.c (dbus_set_error_const, dbus_set_error): make
these barf if the error isn't cleared to NULL
* dbus/dbus-sysdeps.c (_dbus_delete_file): set error on failure
(_dbus_create_directory): new function
* dbus/dbus-errors.c (dbus_set_error): fix warning
* dbus/dbus-string.c (_dbus_string_hex_encode): new function
(_dbus_string_hex_decode): new function
(test_hex_roundtrip): test code
* dbus/dbus-sha.c (_dbus_sha_compute): use dbus_string_hex_encode
* dbus/dbus-md5.c (_dbus_md5_compute): use dbus_string_hex_encode
* dbus/dbus-sysdeps.c (_dbus_string_save_to_file): make this use
the save-to-temp/rename trick to atomically write the new file
(_dbus_string_parse_uint): new function
2003-02-22 Havoc Pennington <hp@pobox.com>
* test/Makefile.am (dist-hook): fix dist for test/data/sha-1
2003-02-22 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c (dbus_message_iter_get_string_array):
(dbus_message_iter_get_byte_array): Fix up doxygen warnings
* dbus/dbus-sha.c: add implementation of SHA-1 algorithm
* dbus/test/data/sha-1: add US government test suite for SHA-1
2003-02-21 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-marshal.c: (_dbus_demarshal_string_array):
Make string arrays NULL-terminated.
* dbus/dbus-memory.c: (dbus_free_string_array):
* dbus/dbus-memory.h:
New function for freeing NULL-terminated string arrays.
* dbus/dbus-message-builder.c: (append_quoted_string),
(_dbus_message_data_load):
Add support for array types.
* dbus/dbus-message.c: (check_message_handling):
Add more types as test cases.
* dbus/dbus-sysdeps.c: (_dbus_string_parse_int),
(_dbus_string_parse_double):
Add the start offset to the end offset.
* test/data/valid-messages/lots-of-arguments.message:
New test message with lots of arguments.
2003-02-21 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-message.c: (dbus_message_append_nil),
(dbus_message_append_int32), (dbus_message_append_uint32),
(dbus_message_append_double), (dbus_message_append_string),
(dbus_message_append_int32_array),
(dbus_message_append_uint32_array),
(dbus_message_append_double_array),
(dbus_message_append_byte_array),
(dbus_message_append_string_array):
Fix all out-of-memory handling in these functions.
2003-02-21 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-message.c: (dbus_message_append_nil):
Fix a silly.
2003-02-21 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-message.c: (dbus_message_append_args_valist),
(dbus_message_append_nil), (dbus_message_append_int32_array),
(dbus_message_append_uint32_array),
(dbus_message_append_double_array),
(dbus_message_append_byte_array),
(dbus_message_append_string_array), (dbus_message_get_args_valist),
(dbus_message_iter_get_int32_array),
(dbus_message_iter_get_uint32_array),
(dbus_message_iter_get_double_array),
(dbus_message_iter_get_byte_array),
(dbus_message_iter_get_string_array):
* dbus/dbus-message.h:
Add functions for appending and getting arrays.
2003-02-21 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-mempool.c (_dbus_mem_pool_new): Make the
element size at least 8 bytes, fixes mempool tests on
64-bit machines.
2003-02-20 Alexander Larsson <alexl@redhat.com>
* dbus/dbus-transport-unix.c (unix_do_iteration):
Unlock the connection mutex during a blocking select call.
Add todo about how we need a way to wake up the select.
* dbus/dbus-connection-internal.h:
* dbus/dbus-connection.c:
Add _dbus_connection_lock and _dbus_connection_unlock.
2003-02-19 Havoc Pennington <hp@pobox.com>
* Doxyfile.in (PREDEFINED): put DOXYGEN_SHOULD_SKIP_THIS in
Doxyfile.in, not Doxyfile
* dbus/dbus-keyring.c: do some hacking on this
* dbus/dbus-sysdeps.c (_dbus_delete_file): new
* dbus/dbus-errors.c (dbus_set_error_const): do not call
dbus_error_init
(dbus_set_error): remove dbus_error_init, check for message ==
NULL *before* we sprintf into it, and add @todo about including
system headers in this file
* dbus/dbus-sysdeps.c (_dbus_create_file_exclusively): new
* dbus/dbus-errors.h (DBUS_ERROR_FAILED): add
* dbus/dbus-sysdeps.c (get_user_info): break this function out to
get various bits of user information based on either username
or user ID
(_dbus_homedir_from_username): new function
2003-02-19 Anders Carlsson <andersca@codefactory.se>
* configure.in:
Add check for nonposix getpwnam_r
* dbus/dbus-mempool.c: (_dbus_mem_pool_new):
Align the pool element size to a sizeof (void *) boundary.
* dbus/dbus-sysdeps.c: (_dbus_setenv), (_dbus_connect_unix_socket),
(_dbus_listen_unix_socket), (_dbus_credentials_from_username):
General Solaris fixes.
* test/data/valid-messages/simplest-manual.message:
Explicitly state that we want little-endian packing.
2003-02-19 Mikael Hallendal <micke@codefactory.se>
* dbus/dbus-server.c (dbus_server_listen): Support tcp: addresses.
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_tcp_socket):
Added to create a transport connecting using a tcp/ip socket.
* dbus/dbus-sysdeps.c (_dbus_connect_tcp_socket): Added to connect
to a tcp socket at given host and port.
(_dbus_listen_tcp_socket): added to listen on tcp socket for given
hostname and port.
* dbus/dbus-server.c (dbus_server_listen): Support tcp: addresses.
* dbus/dbus-server-unix.c (_dbus_server_new_for_tcp_socket):
Added to create a server listening on a TCP/IP socket.
2003-02-19 Havoc Pennington <hp@pobox.com>
Throughout: mop up all the Doxygen warnings and undocumented
stuff.
* dbus/dbus-sysdeps.c (do_exec): do not use execvp, we don't want
to search any paths.
* dbus/dbus-threads.c: move global mutex initializers to
dbus-internals.h, multiple prototypes was confusing doxygen
besides being kind of ugly
* Doxyfile (PREDEFINED): have Doxygen define
DOXYGEN_SHOULD_SKIP_THIS so we can exclude things from
docs with #ifndef DOXYGEN_SHOULD_SKIP_THIS
(do not abuse the feature! it's for stuff like the autogenerated
macros in dbus-md5.c, not just for things you don't feel like
documenting...)
2003-02-18 Havoc Pennington <hp@pobox.com>
* dbus/dbus-string.c (_dbus_string_zero): new function
* dbus/dbus-md5.c: include MD5 implementation by L. Peter Deutsch,
wrap it in some dbus-friendly API
* dbus/dbus-types.h: add 16-bit types
2003-02-18 Joe Shaw <joe@assbarn.com>
* dbus/dbus-auth.c (handle_server_data_stupid_test_mech): Just get
credentials from our currently running process.
(get_word): Fix a buglet where we were copying the entire length
instead of relative to our position.
* dbus/dbus-hash.c (_dbus_hash_test): Don't try to allocate the
keys on the stack... it's 640k of data.
* dbus/dbus-sysdeps.c (_dbus_read_credentials_unix_socket): Always
read the credentials byte off the socket, even if we don't have
SO_PEERCRED.
(_dbus_poll): Implement poll() using select() for systems which
don't have it.
* glib/test-dbus-glib.c (main): Print out an error if no
parameters are given.
* test/data/auth/fallback.auth-script: Added. Tests that a client
can fallback to a secondary auth mechanism if the first fails.
2003-02-18 Havoc Pennington <hp@pobox.com>
* AUTHORS: add Alex
2003-02-17 Havoc Pennington <hp@pobox.com>
* doc/dbus-specification.sgml: lots of cosmetic
cleanups/rearrangement, add assorted FIXME, change DBUS_ADDRESS
env variable to DBUS_BUS_ADDRESS, s/client/application/,
s/server/bus/ (except in authentication section). Add a section
"Message Bus Message Routing"
2003-02-17 Anders Carlsson <andersca@codefactory.se.>
Release 0.4
* NEWS: Update
2003-02-17 Anders Carlsson <andersca@codefactory.se>
* doc/dbus-specification.sgml:
Specification updates.
2003-02-17 Anders Carlsson <andersca@codefactory.se>
* bus/activation.c: (bus_activation_init), (child_setup),
(bus_activation_activate_service):
* bus/activation.h:
* bus/main.c: (main):
Set DBUS_ADDRESS environment variable.
* dbus/dbus-errors.c: (dbus_set_error):
Don't use va_copy since that's a C99 feature.
* dbus/dbus-sysdeps.c: (_dbus_setenv), (do_exec),
(_dbus_spawn_async):
* dbus/dbus-sysdeps.h:
Add child_setup_func to _dbus_spawn_async.
* doc/dbus-specification.sgml:
Update specification.
* test/spawn-test.c: (setup_func), (main):
Fix test.
2003-02-17 Alexander Larsson <alexl@redhat.com>
* dbus/dbus-connection.c (_dbus_connection_handler_destroyed_locked):
Added todo.
2003-02-17 Anders Carlsson <andersca@codefactory.se>
* doc/.cvsignore:
* doc/Makefile.am:
* doc/dbus-test-plan.sgml:
Add test plan document.
* test/Makefile.am:
Fix distcheck.
2003-02-17 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-message.c: (decode_header_data),
(_dbus_message_loader_return_buffer):
Set the header padding amount when loading a message.
2003-02-16 Anders Carlsson <andersca@codefactory.se>
* bus/dispatch.c: (send_one_message):
Only send broadcast messages to registered connections.
* dbus/dbus-message.c: (dbus_message_name_is):
* dbus/dbus-message.h:
New convenience function.
* dbus/dbus-transport-debug.c: (do_reading):
Only dispatch one message per run.
* test/Makefile.am:
* test/bus-test.c: (new_connection_callback), (die),
(test_hello_client1_handler), (test_hello_client2_handler),
(test_hello_replies), (main):
* test/bus-test-loop.[ch]:
Add these.
2003-02-16 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c (dbus_connection_dispatch_message): fix
backward conditional
2003-02-16 Alexander Larsson <alexl@redhat.com>
* dbus/dbus-connection.c:
Implement sent_message_with_reply. (with_reply_and block is still
busted).
Made dispatch_message not lose message if OOM.
* dbus/dbus-errors.h:
Add NoReply error (for reply timeouts).
2003-02-16 Alexander Larsson <alexl@redhat.com>
* dbus/dbus-hash.c (_dbus_hash_table_unref):
Actually free keys and values when destroying hashtable.
2003-02-16 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-auth.c: (client_try_next_mechanism):
Plug a leak.
* dbus/dbus-threads.c: (dbus_condvar_wait_timeout):
Return TRUE if there's no thread implementation around.
* glib/dbus-gmain.c: (free_source),
(dbus_connection_hookup_with_g_main):
Make sure to remove the GSource when the connection is finalized.
2003-02-16 Anders Carlsson <andersca@codefactory.se>
* bus/dispatch.c: (bus_dispatch_message_handler):
* dbus/dbus-errors.h:
Return an error if someone tries to send a message to a service
that doesn't exist.
2003-02-16 Anders Carlsson <andersca@codefactory.se>
* bus/activation.c: (load_directory), (bus_activation_init),
(bus_activation_activate_service):
* bus/activation.h:
* bus/driver.c:
(bus_driver_handle_activate_service), (bus_driver_handle_message):
More work on the activation handling.
* dbus/dbus-errors.h:
Add some error messages
* dbus/dbus-message.c: (dbus_message_new_error_reply):
* dbus/dbus-message.h:
New function that creates an error message.
* dbus/dbus-protocol.h:
Add ACTIVATE_SERVER message.
* dbus/dbus-server-unix.c: (unix_handle_watch),
(_dbus_server_new_for_domain_socket):
Call _dbus_fd_set_close_on_exec.
* dbus/dbus-sysdeps.c: (make_pipe), (do_exec),
(_dbus_spawn_async), (_dbus_disable_sigpipe),
(_dbus_fd_set_close_on_exec):
* dbus/dbus-sysdeps.h:
Add _dbus_fd_set_close_on exec function. Also add function that checks
that all open fds are set to close-on-exec and warns otherwise.
* dbus/dbus-transport-unix.c:
(_dbus_transport_new_for_domain_socket):
Call _dbus_fd_set_close_on_exec.
2003-02-16 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c (dbus_connection_set_change_sigpipe):
allow people to avoid setting SIGPIPE to SIG_IGN
(_dbus_connection_new_for_transport): disable SIGPIPE unless
we've been asked not to
2003-02-15 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-list.c: (_dbus_list_append_link),
(_dbus_list_prepend_link):
* dbus/dbus-memory.c: (dbus_malloc), (dbus_malloc0),
(dbus_realloc):
Warning fixes.
2003-02-15 Anders Carlsson <andersca@codefactory.se>
* bus/Makefile.am:
* bus/activation.c: (bus_activation_entry_free),
(add_desktop_file_entry), (load_directory), (bus_activation_init):
* bus/activation.h:
* bus/main.c: (main):
Add simple activation support, doesn't work yet though.
2003-02-15 Zack Rusin <zack@kde.org>
* qt/dbus-qthread.cpp: small casting fix
2003-02-15 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-errors.c: (dbus_set_error):
* dbus/dbus-errors.h:
Add a few errors and make dbus_set_error void.
* dbus/dbus-sysdeps.c:
(_dbus_errno_to_string), (close_and_invalidate), (make_pipe),
(write_err_and_exit), (read_ints), (do_exec), (_dbus_spawn_async):
* dbus/dbus-sysdeps.h:
Add _dbus_spawn_async.
* test/spawn-test.c: (main):
Test for _dbus_spawn_async.
2003-02-15 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-internals.h:
Fix build without tests.
* dbus/dbus-list.c: (alloc_link):
Fix a segfault when a malloc fails.
* dbus/dbus-memory.c: (initialize_malloc_debug), (dbus_malloc),
(dbus_malloc0), (dbus_realloc):
Add support for malloc debugging.
2003-02-15 Alexander Larsson <alexl@redhat.com>
* dbus/dbus-threads.c:
* dbus/dbus-threads.h:
Add condvars. Remove static mutext from API.
Implement static mutexes by initializing them from threads_init.
* glib/dbus-gthread.c:
* qt/dbus-qthread.cpp:
Update with the thread api changes.
* dbus/dbus-list.c:
* dbus/dbus-list.h:
Turn StaticMutex into normal mutex + init function.
Export new functions _dbus_list_alloc_link, _dbus_list_free_link,
_dbus_list_append_link, _dbus_list_prepend_link
* dbus/dbus-sysdeps.c:
* dbus/dbus-sysdeps.h:
New type dbus_atomic_t, and new functions _dbus_atomic_inc,
_dbus_atomic_dec. Only slow fallback implementation at the moment.
* dbus/dbus-protocol.h:
Add DBUS_MESSAGE_LOCAL_DISCONNECT define
* dbus/dbus-message.c:
Make ref/unref atomic.
Fix some docs.
* dbus/dbus-connection-internal.h:
* dbus/dbus-connection.c:
* dbus/dbus-connection.h:
Make threadsafe.
Change _peek to _borrow,_return & _steal_borrowed.
Change disconnect callback to event.
Make dbus_connection_dispatch_messages reentrant.
* dbus/dbus-transport.c:
Don't ref the connection on calls to the transport
implementation.
* dbus/dbus-message-handler.c:
Make threadsafe.
* glib/dbus-gmain.c:
Don't use peek_message anymore
* test/Makefile.am:
* test/debug-thread.c:
* test/debug-thread.h:
Simple thread implementation that asserts() on deadlocks in
single-threaded code.
* test/bus-test.c:
(main) Call debug_threads_init.
* test/watch.c:
Use disconnect message instead of disconnect callback.
* bus/connection.c:
* bus/connection.h:
Don't call dbus_connection_set_disconnect_function. Instead export
bus_connection_disconnect.
* bus/dispatch.c:
Call bus_connection_disconnect when we get a disconnected message.
2003-02-15 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c (dbus_message_new): fool around with the
docs
2003-02-14 Havoc Pennington <hp@pobox.com>
* dbus/dbus-mempool.c: fail if the debug functions so indicate
* dbus/dbus-memory.c: fail if the debug functions indicate we
should
* dbus/dbus-internals.c (_dbus_set_fail_alloc_counter)
(_dbus_decrement_fail_alloc_counter): debug functions to
simulate memory allocation failures
2003-02-14 Havoc Pennington <hp@pobox.com>
* dbus/dbus-errors.h (struct DBusError): add a word of padding
to DBusError
2003-02-13 Anders Carlsson <andersca@codefactory.se>
* bus/driver.c: (bus_driver_handle_hello):
* bus/driver.h:
* bus/services.c: (bus_service_lookup):
Reorder message sending so we get a more sane order.
* test/bus-test.c: (message_handler):
Fix tyop.
2003-02-13 Anders Carlsson <andersca@codefactory.se>
* bus/driver.c: (bus_driver_send_service_deleted),
(bus_driver_send_service_created), (bus_driver_send_service_lost),
(bus_driver_send_service_acquired), (bus_driver_handle_hello),
(bus_driver_send_welcome_message),
(bus_driver_handle_list_services),
(bus_driver_handle_acquire_service),
(bus_driver_handle_service_exists):
* dbus/dbus-bus.c: (dbus_bus_register_client),
(dbus_bus_acquire_service), (dbus_bus_service_exists):
* dbus/dbus-errors.c: (dbus_result_to_string):
* dbus/dbus-errors.h:
* dbus/dbus-message.c: (dbus_message_append_args),
(dbus_message_append_args_valist), (dbus_message_get_args),
(dbus_message_get_args_valist), (dbus_message_get_args_iter),
(dbus_message_iter_get_arg_type), (dbus_message_iter_get_string),
(dbus_message_iter_get_byte_array),
(dbus_message_iter_get_string_array), (message_iter_test),
(check_message_handling), (_dbus_message_test):
* dbus/dbus-message.h:
* test/bus-test.c: (main):
Change fields to arguments in messages, so that they won't be
confused with header fields.
* glib/test-dbus-glib.c: (main):
Remove append_fields from hello message.
2003-02-13 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-errors.c:
* dbus/dbus-message.c:
* dbus/dbus-string.c:
Documentation fixes.
2003-02-13 Anders Carlsson <andersca@codefactory.se>
* glib/dbus-gmain.c: (timeout_handler), (add_timeout),
(remove_timeout):
Implement support for timeouts in dbus-glib.
2003-02-13 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-message-builder.c: (_dbus_message_data_load):
* dbus/dbus-message.c: (process_test_subdir):
* test/break-loader.c: (find_breaks_based_on):
Plug some memory leaks.
2003-02-13 Richard Hult <rhult@codefactory.se>
* bus/main.c: Fix build.
* dbus/dbus-errors.h:
* dbus/dbus-errors.c: Fix copyright for Anders.
2003-02-13 Anders Carlsson <andersca@codefactory.se>
* bus/Makefile.am:
Add utils.[ch]
* bus/connection.c: (bus_connection_foreach):
Fix a warning.
* bus/desktop-file.c: (grow_lines_in_section), (grow_sections),
(unescape_string), (new_section), (parse_section_start),
(parse_key_value), (report_error), (bus_desktop_file_load),
(bus_desktop_file_get_string):
* bus/desktop-file.h:
Use DBusError for error reporting.
* bus/dispatch.c: (send_one_message),
(bus_dispatch_message_handler):
* bus/driver.c: (bus_driver_send_service_deleted),
(bus_driver_send_service_created), (bus_driver_send_service_lost),
(bus_driver_send_service_acquired), (bus_driver_handle_hello),
(bus_driver_send_welcome_message),
(bus_driver_handle_list_services),
(bus_driver_handle_acquire_service),
(bus_driver_handle_service_exists):
* bus/loop.c: (bus_loop_run):
* bus/main.c:
Use BUS_HANDLE_OOM instead of _DBUS_HANDLE_OOM.
* bus/utils.c: (bus_wait_for_memory):
* bus/utils.h:
New files with general utility functions.
* dbus/dbus-internals.h:
Remove _DBUS_HANDLE_OOM.
2003-02-13 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-errors.c: (dbus_result_to_string), (dbus_error_init),
(dbus_error_free), (dbus_set_error_const), (dbus_set_error):
* dbus/dbus-errors.h:
Add DBusError structure.
2003-02-13 Anders Carlsson <andersca@codefactory.se>
* test/data/valid-messages/standard-acquire-service.message:
* test/data/valid-messages/standard-hello.message:
* test/data/valid-messages/standard-list-services.message:
* test/data/valid-messages/standard-service-exists.message:
Add some standard messages.
2003-02-13 Anders Carlsson <andersca@codefactory.se>
* bus/driver.c: (bus_driver_send_welcome_message),
(bus_driver_handle_list_services),
(bus_driver_handle_acquire_service),
(bus_driver_handle_service_exists), (bus_driver_handle_message):
Update for API changes in libdbus.
* dbus/dbus-message.c: (dbus_message_new_reply):
* dbus/dbus-message.h:
Remove the name argument. The spec states that replies shouldn't
have a name.
2003-02-13 Anders Carlsson <andersca@codefactory.se>
* bus/desktop-file.c: (parse_section_start), (parse_key_value),
(report_error), (bus_desktop_file_load), (lookup_section),
(lookup_line), (bus_desktop_file_get_raw),
(bus_desktop_file_get_string):
* bus/desktop-file.h:
Some fixes, and new functions for getting a key value from a section.
2003-02-13 Havoc Pennington <hp@pobox.com>
* test/data/auth/fail-after-n-attempts.auth-script: new test
* dbus/dbus-auth.c (send_rejected): shutdown_mech() when we
reject the client.
2003-02-13 Havoc Pennington <hp@pobox.com>
* dbus/dbus-auth.c (handle_server_data_external_mech): args to
dbus_credentials_match were backward
* dbus/dbus-auth-script.c (_dbus_auth_script_run): support
NO_CREDENTIALS and ROOT_CREDENTIALS
* dbus/dbus-auth.c (_dbus_auth_do_work): move get_state() routine
into here. Never process more commands after we've reached an
end state; store further data as unused bytes.
* test/data/auth/*: add more auth tests
* dbus/dbus-auth-script.c (_dbus_auth_script_run): support EXPECT
command to match exact string and EXPECT_UNUSED to match unused
bytes
* test/Makefile.am (dist-hook): fix to dist all the test stuff
2003-02-12 Havoc Pennington <hp@pobox.com>
* dbus/dbus-string.c (_dbus_string_pop_line): fix to also strip
\r off of popped lines
* dbus/dbus-auth.c (_dbus_auth_test): write code to run auth
scripts
* dbus/dbus-auth-script.c (_dbus_auth_script_run): when doing a
SEND, append \r\n
2003-02-12 Havoc Pennington <hp@pobox.com>
* dbus/Makefile.am: remove break-loader from the build, since it
moved.
* configure.in: add --enable-gcov to turn on coverage profiling
flags and disable optimization
2003-02-10 Havoc Pennington <hp@pobox.com>
* dbus/dbus-auth-script.c, dbus/dbus-auth-script.h: sync
initial cut at test framework for DBusAuth from laptop.
Doesn't quite work yet but it compiles and I need to get
it off the 266mhz laptop. ;-)
* dbus/dbus-server-debug.c (_dbus_server_debug_accept_transport):
fix a memleak in error case
2003-02-12 Anders Carlsson <andersca@codefactory.se>
* bus/Makefile.am:
* bus/desktop-file.c:
* bus/desktop-file.h:
Add a desktop file parser.
2003-02-11 Zack Rusin <zack@kde.org>
* qt/message.[h|cpp]: sample implementation
of the KDE wrapper for DBusMessage
2003-02-09 Zack Rusin <zack@kde.org>
* test/bus-test.c: make_it_compile
* doc/dbus-specification.sgml: minimal semantic fix
2003-02-06 Anders Carlsson <andersca@codefactory.se>
Release 0.3
* NEWS: Update
2003-02-06 Anders Carlsson <andersca@codefactory.se>
* dbus/Makefile.am:
* dbus/dbus-break-loader.c:
* test/Makefile.am:
* test/break-loader.c:
Move dbus-break-loader to test/ and rename it to break-loader.
2003-02-02 Havoc Pennington <hp@pobox.com>
* dbus/dbus-keyring.c, dbus/dbus-keyring.h: template files
for code to manage cookies in your home directory
* dbus/dbus-sysdeps.c (_dbus_generate_random_bytes): new function
* dbus/dbus-auth.c (get_state): impose a maximum number of tries
to authenticate, then disconnect the client.
2003-02-03 Alexander Larsson <alexl@redhat.com>
* dbus/dbus-message.c (dbus_message_append_fields):
Correct docs.
2003-02-02 Anders Carlsson <andersca@codefactory.se>
* doc/dbus-specification.sgml:
Update address format section.
2003-02-02 Anders Carlsson <andersca@codefactory.se>
* test/Makefile.am:
* test/bus-test.c: (get_time), (add_timeout), (remove_timeout),
(message_handler), (new_connection_callback), (loop_quit),
(loop_run), (main):
Add bus test.
2003-02-02 Anders Carlsson <andersca@codefactory.se>
* bus/driver.c: (bus_driver_handle_service_exists):
Simplify the code a bit.
* dbus/dbus-bus.c: (dbus_bus_service_exists):
Fix a silly.
2003-02-02 Anders Carlsson <andersca@codefactory.se>
* bus/Makefile.am:
Add libdbus-daemon.la and link to it.
2003-02-01 James Willcox <jwillcox@gnome.org>
* bus/driver.c: (bus_driver_handle_own_service):
Actually include the service reply code in the message.
2003-02-02 Anders Carlsson <andersca@codefactory.se>
* bus/driver.c: (bus_driver_handle_service_exists):
Don't unref the incoming message.
2003-02-02 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus.h: Add dbus-address.h and dbus-bus.h
2003-02-02 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-server.c: (dbus_server_listen):
* dbus/dbus-transport.c: (_dbus_transport_open):
ifdef out the calls to the debug transport and server.
2003-02-02 Alexander Larsson <alexl@redhat.com>
* dbus/dbus-watch.c (dbus_watch_get_flags):
Add note in the docs that ERROR or HANGUP won't be returned
and are assumed always on.
* glib/dbus-gmain.c (add_watch):
Always add IO_ERR | IO_HUP
* dbus/dbus-message.h:
Add semicolon after dbus_message_iter_get_string_array().
Makes qt code build again
2003-02-01 Anders Carlsson <andersca@codefactory.se>
* bus/driver.c: (create_unique_client_name),
(bus_driver_handle_hello):
Don't take a name, just use a numeric id to identify
each client.
* dbus/Makefile.am:
* dbus/dbus-bus.c: (dbus_bus_register_client),
(dbus_bus_acquire_service), (dbus_bus_service_exists):
* dbus/dbus-bus.h:
Add new convenience functions for communicating with the bus.
* dbus/dbus-message.h:
* dbus/dbus-protocol.h:
Fix a typo.
2003-02-01 Alexander Larsson <alexl@redhat.com>
* dbus/dbus-message.c (dbus_message_append_fields):
Add some more doc comments.
2003-02-01 Havoc Pennington <hp@pobox.com>
* dbus/dbus-break-loader.c (randomly_modify_length): change
a 4-byte value in the message as if it were a length
* dbus/dbus-sysdeps.c (_dbus_string_save_to_file): don't set
execute bit on saved files
2003-02-01 Havoc Pennington <hp@pobox.com>
* dbus/dbus-break-loader.c (main): new program to find messages
that break the loader.
* dbus/dbus-sysdeps.c (_dbus_string_append_uint): new function
* dbus/dbus-sysdeps.c (_dbus_string_save_to_file): new function
* dbus/dbus-string.c (_dbus_string_set_byte): new
2003-01-31 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c: refactor the test code to be more general,
in preparation for writing a "randomly permute test cases to
try to break the loader" program.
2003-01-31 Havoc Pennington <hp@pobox.com>
* doc/dbus-specification.sgml: work on the specification
* dbus/dbus-message.c (_dbus_message_loader_return_buffer): check
the protocol version of the message.
* dbus/dbus-protocol.h: drop special _REPLY names, the spec
no longer specifies that.
(DBUS_SERVICE_REPLY_SERVICE_EXISTS): fix flags (1/2/4/8 not
1/2/3/4)
* dbus/dbus-marshal.c (_dbus_marshal_get_arg_end_pos): add missing
"break" for DBUS_TYPE_NIL, remove @todo
2003-01-31 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c (dbus_message_set_is_error_reply): rename
just set_is_error/get_is_error as this is a commonly-used
function, and write docs.
2003-01-31 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-address.c: (dbus_address_entry_free):
Free key and value lists.
* dbus/dbus-internals.c: (_dbus_type_to_string):
Add the types we didn't have.
* dbus/dbus-marshal.c: (_dbus_marshal_get_arg_end_pos),
(_dbus_marshal_validate_arg):
Add NIL types.
* dbus/dbus-message.c: (dbus_message_set_sender):
Remove todo about being able to set sender to NULL.
(dbus_message_set_is_error_reply),
(dbus_message_get_is_error_reply):
* dbus/dbus-message.h:
New functions.
* dbus/dbus-protocol.h:
Add error reply flag.
* test/data/valid-messages/opposite-endian.message:
Add NIL type to test.
2003-01-31 Havoc Pennington <hp@pobox.com>
* doc/dbus-specification.sgml: fully specify the header. Add
flags and major protocol version, and change header/body len to
unsigned.
* dbus/dbus-message-builder.c (append_saved_length): append length
as uint32
* dbus/dbus-message.c (dbus_message_create_header): change header
length and body length to unsigned. Add the new fields from the
spec
(_dbus_message_loader_return_buffer): unsigned header/body len
2003-01-30 Havoc Pennington <hp@pobox.com>
* dbus/dbus-auth.c: rework to use only REJECTED, no
MECHANISMS
* doc/dbus-sasl-profile.txt: drop MECHANISMS and just
use REJECTED, suggested by Mark McLoughlin
2003-01-30 Havoc Pennington <hp@pobox.com>
* dbus/dbus-server.c (dbus_server_listen): @todo about how we need
a better way to report errors here. e.g. "unix address lacks
path" or something. also "no such file" when the path doesn't
exist, etc.
* dbus/dbus-address.c (dbus_address_entries_free): add @todo about
leaking list nodes
(dbus_parse_address): add @todo about documenting address format,
and allowing , and ; to be escaped
2003-01-30 Anders Carlsson <andersca@codefactory.se>
* dbus/Makefile.am:
Add dbus-address.[ch]
* dbus/dbus-address.c: (dbus_address_entry_free),
(dbus_address_entries_free), (create_entry),
(dbus_address_entry_get_method), (dbus_address_entry_get_value),
(dbus_parse_address), (_dbus_address_test):
* dbus/dbus-address.h:
New files for dealing with address parsing.
* dbus/dbus-connection.c:
Document timeout functions.
* dbus/dbus-message.c:
Document dbus_message_new_from_message.
* dbus/dbus-server-debug.c:
Document.
* dbus/dbus-server.c: (dbus_server_listen):
Parse address and use correct server implementation.
* dbus/dbus-string.c: (_dbus_string_find_to), (_dbus_string_test):
* dbus/dbus-string.h:
New function with test.
* dbus/dbus-test.c: (dbus_internal_symbol_do_not_use_run_tests):
* dbus/dbus-test.h:
Add address tests.
* dbus/dbus-transport-debug.c:
Document.
* dbus/dbus-transport.c: (_dbus_transport_open):
Parse address and use correct transport implementation.
2003-01-30 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c: use message->byte_order instead of
DBUS_COMPILER_BYTE_ORDER throughout.
(dbus_message_create_header): pad header to align the
start of the body of the message to 8-byte boundary
* dbus/dbus-marshal.h: make all the demarshalers take const
DBusString arguments.
* dbus/dbus-message.c (_dbus_message_loader_return_buffer):
validate message args here, so we don't have to do slow validation
later, and so we catch bad messages as they are incoming. Also add
better checks on header_len and body_len. Also fill in
message->byte_order
* dbus/dbus-string.c (_dbus_string_validate_utf8): new (not
implemented properly)
(_dbus_string_validate_nul): new function to check all-nul
* dbus/dbus-marshal.c (_dbus_marshal_get_field_end_pos): rename
get_arg_end_pos and remove all validation
(_dbus_marshal_validate_arg): actually do validation here.
2003-01-29 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c (check_message_handling): fix assertion
failure on set_client_serial
2003-01-28 Havoc Pennington <hp@pobox.com>
* dbus/dbus-server-debug.c: Add doc section comments
* dbus/dbus-transport-debug.c: add doc section comments
2003-01-28 Havoc Pennington <hp@redhat.com>
* dbus/dbus-string.c (_dbus_string_base64_decode): append bytes in
the reverse order from how I had it
(_dbus_string_base64_encode): reverse encoding order. I was
basically byteswapping everything during encoding.
2003-01-28 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-connection-internal.h:
* dbus/dbus-connection.c: (_dbus_connection_add_timeout),
(_dbus_connection_remove_timeout):
Add functions for adding and removing timeouts.
* dbus/dbus-message.c: (dbus_message_new_from_message):
Add new function that takes a message and creates an exact
copy of it, but with the refcount set to 1.
(check_message_handling):
Fix build error.
* dbus/dbus-server-protected.h:
* dbus/dbus-server.c: (_dbus_server_init_base),
(_dbus_server_finalize_base), (_dbus_server_add_timeout),
(dbus_server_set_timeout_functions):
(_dbus_server_remove_timeout):
New functions so that a server can add and remove timeouts.
(dbus_server_listen):
Add commented out call to dbus_server_debug_new.
* dbus/dbus-timeout.c: (_dbus_timeout_new):
Actually set the handler, doh.
* dbus/dbus-transport.c: (_dbus_transport_open):
Add commented out call to dbus_transport_debug_client_new.
* dbus/Makefile.am:
Add dbus-transport-debug.[ch] and dbus-server-debug.[ch]
2003-01-28 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c (check_message_handling): function to check
on the loaded message, iterates over it etc.
2003-01-28 Havoc Pennington <hp@pobox.com>
* test/Makefile.am (dist-hook): fix make distdir
* dbus/Makefile.am (TESTS_ENVIRONMENT): fix make check
2003-01-27 Havoc Pennington <hp@pobox.com>
* dbus/dbus-mempool.c (time_for_size): replace printf with
_dbus_verbose
* dbus/dbus-message-builder.c (_dbus_message_data_load): allow
empty lines; fix the SAVE_LENGTH stuff to be
START_LENGTH/END_LENGTH so it actually works; couple other
bugfixes
* test/Makefile.am (dist-hook): add dist-hook for .message files
* dbus/dbus-string.c (DBUS_STRING_COPY_PREAMBLE): source of a copy
can be constant or locked.
(_dbus_string_free): allow freeing a const string as
documented/intended
* dbus/dbus-sysdeps.c (_dbus_concat_dir_and_file): utility
* dbus/dbus-test-main.c (main): take an argument which is the
directory containing test data
* dbus/dbus-message.c (_dbus_message_test): pass a test_data_dir
argument to this and load all the messages in test/data/
checking that they can be loaded or not loaded as appropriate.
2003-01-27 Anders Carlsson <andersca@codefactory.se>
* bus/dispatch.c: (bus_dispatch_message_handler):
Dispatch messages sent to services.
* bus/driver.c: (bus_driver_send_service_deleted),
(bus_driver_send_service_created), (bus_driver_send_service_lost),
(bus_driver_send_service_acquired):
Add helper functions for sending service related messages.
(bus_driver_send_welcome_message):
Send HELLO_REPLY instead of WELCOME.
(bus_driver_handle_list_services):
Send LIST_SERVICES_REPLY instead of SERVICES.
(bus_driver_handle_own_service),
(bus_driver_handle_service_exists):
New message handlers.
(bus_driver_handle_message):
Invoke new message handlers.
(bus_driver_remove_connection):
Don't remove any services here since that's done automatically
by bus_service_remove_owner now.
* bus/driver.h:
New function signatures.
* bus/services.c: (bus_service_add_owner):
Send ServiceAcquired message if we're the only primary owner.
(bus_service_remove_owner):
Send ServiceAcquired/ServiceLost messages.
(bus_service_set_prohibit_replacement),
(bus_service_get_prohibit_replacement):
Functions for setting prohibit replacement.
(bus_service_has_owner):
New function that checks if a connection is in the owner queue of
a certain service.
* bus/services.h:
Add new function signatures.
* dbus/dbus-list.c: (_dbus_list_test):
Add tests for _dbus_list_remove_last and traversing the list backwards.
* dbus/dbus-list.h:
Fix a typo in _dbus_list_get_prev_link, if we're at the first element we can't
go any further, so return NULL then.
* dbus/dbus-protocol.h:
Add new messages, service flags and service replies.
2003-01-26 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message-builder.c: implement, completely untested.
* test/data/*: add data to be used in testing.
".message" files are our simple loadable text format.
".message-raw" will be binary dumps of messages.
* dbus/dbus-string.c (_dbus_string_starts_with_c_str): new
2003-01-26 Havoc Pennington <hp@pobox.com>
* dbus/dbus-sysdeps.c (_dbus_file_get_contents): new function
* dbus/dbus-errors.c (dbus_result_to_string): add
file errors
* dbus/dbus-message-builder.c: new file, will contain code to load
up messages from files. Not implemented yet.
2003-01-26 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.c (dbus_message_set_sender): support deleting
the sender by setting to NULL
2003-01-26 Havoc Pennington <hp@pobox.com>
The unit tests pass, but otherwise untested. If it breaks, the
tests should have been better. ;-)
* bus/driver.c (bus_driver_handle_hello): return if we disconnect
the connection.
* dbus/dbus-message.c: redo everything so we maintain
message->header as the only copy of the various fields.
This avoids the possibility of out-of-memory in some cases,
for example dbus_message_lock() can't run out of memory anymore,
and avoids extra copying. Figured I may as well go ahead and do
this since it was busted for dbus_message_lock to not return
failure on OOM, and dbus_message_write_header was totally
unchecked for OOM. Also fixed some random other bugs.
* dbus/dbus-marshal.c (_dbus_marshal_get_field_end_pos): verify
that strings are nul-terminated. Also, end_pos can be equal
to string length just not greater than, I think.
(_dbus_marshal_set_int32): new function
(_dbus_marshal_set_uint32): new function
(_dbus_marshal_set_string): new function
* dbus/dbus-connection.c (_dbus_connection_new_for_transport): fix
a warning, init timeout_list to NULL
(dbus_connection_send_message): don't use uninitialized variable
"serial"
* dbus/dbus-string.c (_dbus_string_replace_len): new function
2003-01-26 Anders Carlsson <andersca@codefactory.se>
* bus/driver.c: (bus_driver_handle_hello),
(bus_driver_send_welcome_message):
Plug leaks
2003-01-26 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-auth.c: (process_auth), (_dbus_auth_unref):
* dbus/dbus-connection.c: (_dbus_connection_new_for_transport),
(dbus_connection_unref):
* dbus/dbus-marshal.c: (_dbus_marshal_test):
* dbus/dbus-message.c: (dbus_message_unref),
Plug memory leaks.
(dbus_message_get_fields):
Remove debugging printout.
(_dbus_message_loader_return_buffer):
Don't store the header string.
(_dbus_message_test):
Plug leaks.
2003-01-26 Richard Hult <rhult@codefactory.se>
* glib/dbus-gmain.c (dbus_connection_dispatch): Traverse a copy of
the file descriptor list, since it can change under us.
2003-01-25 Anders Carlsson <andersca@codefactory.se>
* glib/dbus-gmain.c: (dbus_connection_prepare),
(dbus_connection_check), (dbus_connection_dispatch), (add_watch),
(remove_watch), (dbus_connection_hookup_with_g_main):
Rewrite the glib handling to use its own GSource instead of a
GIOChannel so we can catch messages put in the queue while waiting
for a reply.
2003-01-25 Anders Carlsson <andersca@codefactory.se>
* bus/Makefile.am:
* bus/connection.c: (connection_disconnect_handler),
(connection_watch_callback), (bus_connection_setup):
* bus/dispatch.c: (send_one_message),
(bus_dispatch_broadcast_message), (bus_dispatch_message_handler),
(bus_dispatch_add_connection), (bus_dispatch_remove_connection):
* bus/dispatch.h:
* bus/driver.c: (bus_driver_send_service_deleted),
(bus_driver_send_service_created), (bus_driver_handle_hello),
(bus_driver_send_welcome_message),
(bus_driver_handle_list_services), (bus_driver_remove_connection),
(bus_driver_handle_message):
* bus/driver.h:
Refactor code, put the message dispatching in its own file. Use
_DBUS_HANDLE_OOM. Also send ServiceDeleted messages when a client
is disconnected.
2003-01-25 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-internals.h:
Add _DBUS_HANDLE_OOM macro, it doesn't do anything currently.
* dbus/dbus-message.c: (dbus_message_get_sender):
* dbus/dbus-message.h:
Implement dbus_message_get_sender.
* dbus/dbus-protocol.h:
Add message and service defines.
2003-01-25 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-connection.c: (dbus_connection_send_message):
* dbus/dbus-message-internal.h:
* dbus/dbus-message.c: (_dbus_message_get_client_serial),
(dbus_message_write_header):
Remove _dbus_messag_unlock and don't set the client serial on a
message if one already exists.
2003-01-24 Havoc Pennington <hp@pobox.com>
* dbus/dbus-list.c (alloc_link): put a thread lock on the global
list_pool
* bus/driver.c (bus_driver_handle_list_services): fix a leak
on OOM
2003-01-25 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-list.c: (alloc_link), (free_link):
Use a memory pool for the links.
2003-01-25 Anders Carlsson <andersca@codefactory.se>
* bus/connection.c: (bus_connection_foreach):
* bus/connection.h:
Add new bus_connection_foreach function.
* bus/driver.c: (send_one_message), (bus_driver_broadcast_message):
Add function that broadcasts a message to all clients.
(bus_driver_send_service_created), (bus_driver_handle_hello),
(bus_driver_send_welcome_message),
(bus_driver_handle_list_services), (bus_driver_message_handler):
Implement functions that take care of listing services, and notifying
clients when new services are created.
* bus/services.c: (bus_services_list):
* bus/services.h:
Add new function that returns an array of strings with the currently
registered services.
* glib/dbus-glib.h:
* glib/dbus-gmain.c:
Update copyright year.
2003-01-25 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-connection.c: (dbus_connection_send_message):
Unlock the message in case it was sent earlier.
(dbus_connection_send_message_with_reply_and_block):
Remove the reply message from the list.
* dbus/dbus-marshal.c: (_dbus_demarshal_string_array):
Set array_len and new_pos correctly.
(_dbus_marshal_test):
Remove debug output.
* dbus/dbus-message-internal.h:
* dbus/dbus-message.c: (_dbus_message_get_reply_serial):
New function that returns the reply serial.
(_dbus_message_unlock):
New function that unlocks a message and resets its header.
(dbus_message_append_string_array),
(dbus_message_get_fields_valist),
(dbus_message_iter_get_field_type),
(dbus_message_iter_get_string_array),
(dbus_message_get_fields),
(dbus_message_append_fields_valist):
Handle string arrays.
(dbus_message_set_sender):
Make this function public since the bus daemon needs it.
(decode_header_data):
Set the reply serial to -1 initially.
* dbus/dbus-message.h:
Add dbus_message_set_sender.
2003-01-24 Havoc Pennington <hp@pobox.com>
* doc/dbus-specification.sgml: add some stuff
2003-01-22 Havoc Pennington <hp@pobox.com>
* doc/dbus-specification.sgml: Start to document the protocol.
2003-01-22 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c
(dbus_connection_send_message_with_reply_and_block): add some @todo
* bus/driver.c (bus_driver_add_connection): add a FIXME about memleak
2003-01-21 Havoc Pennington <hp@pobox.com>
(patch untested because can't compile)
* bus/driver.c (create_unique_client_name): make this function
never recycle client names. Also, caller should initialize
the DBusString.
* dbus/dbus-sysdeps.c (_dbus_get_current_time): new function
2003-01-21 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-marshal.c: (_dbus_marshal_double),
(_dbus_marshal_int32), (_dbus_marshal_uint32),
(_dbus_marshal_int32_array), (_dbus_marshal_uint32_array),
(_dbus_marshal_double_array), (_dbus_marshal_string_array),
(_dbus_demarshal_int32_array), (_dbus_demarshal_uint32_array),
(_dbus_demarshal_double_array), (_dbus_demarshal_string_array),
(_dbus_marshal_get_field_end_pos), (_dbus_marshal_test):
* dbus/dbus-marshal.h:
* dbus/dbus-protocol.h:
Add support for marshalling and demarshalling integer, double
and string arrays.
2003-01-21 Anders Carlsson <andersca@codefactory.se>
* bus/Makefile.am:
Add driver.[ch]
* bus/connection.c: (connection_disconnect_handler):
Remove the connection from the bus driver's list.
(connection_watch_callback): Dispatch messages.
(free_connection_data): Free connection name.
(bus_connection_setup): Add connection to the bus driver's list.
(bus_connection_remove_owned_service):
(bus_connection_set_name), (bus_connection_get_name):
Add functions for setting and getting the connection's name.
* bus/connection.h:
Add function headers.
* bus/driver.c: (create_unique_client_name),
(bus_driver_handle_hello_message),
(bus_driver_send_welcome_message), (bus_driver_message_handler),
(bus_driver_add_connection), (bus_driver_remove_connection):
* bus/driver.h:
* bus/main.c:
* bus/services.c: (bus_service_free):
* bus/services.h:
New file that handles communication and registreation with the bus
itself.
2003-01-21 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-connection.c: (dbus_connection_send_message):
Add a new client_serial parameter.
(dbus_connection_send_message_with_reply):
Remove a @todo since we've implemented the blocking function.
(dbus_connection_send_message_with_reply_and_block):
New function that sends a message and waits for a reply and
then returns the reply.
* dbus/dbus-connection.h:
Add new functions.
* dbus/dbus-errors.c: (dbus_result_to_string):
* dbus/dbus-errors.h:
Add new DBUS_RESULT.
* dbus/dbus-message-internal.h:
* dbus/dbus-message.c: (_dbus_message_get_reply_serial),
(_dbus_message_set_sender), (dbus_message_write_header),
(dbus_message_new_reply), (decode_header_data),
(_dbus_message_loader_return_buffer), (_dbus_message_test):
* dbus/dbus-message.h:
Add new functions that set the reply serial and sender.
Also marshal and demarshal them correctly and add test.
* dbus/dbus-protocol.h:
Add new DBUS_MESSAGE_TYPE_SENDER.
* glib/dbus-glib.h:
* glib/dbus-gmain.c: (watch_callback), (free_callback_data),
(add_watch), (remove_watch), (add_timeout), (remove_timeout),
(dbus_connection_hookup_with_g_main):
* glib/test-dbus-glib.c: (main):
Rewrite to use GIOChannel and remove the GSource crack.
* test/echo-client.c: (main):
* test/watch.c: (check_messages):
Update for changed APIs
2003-01-19 Anders Carlsson <andersca@codefactory.se>
* dbus/Makefile.am: Add dbus-timeout.[cħ]
* dbus/dbus-connection.c: (_dbus_connection_new_for_transport):
Create a DBusTimeoutList.
(dbus_connection_set_timeout_functions): Add new function to
set timeout callbacks
* dbus/dbus-connection.h: Add public DBusTimeout API.
* dbus/dbus-message.c: (dbus_message_get_service):
* dbus/dbus-message.h: New function.
* dbus/dbus-server.c: Fix small doc typo.
* dbus/dbus-timeout.[ch]: New files for mainloop timeouts.
2003-01-19 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-string.c (_dbus_string_move_len): Don't delete all
of the string, just as long as specified.
2003-01-19 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c (dbus_connection_get_is_authenticated):
new function
* dbus/dbus-server.c (dbus_server_set_max_connections)
(dbus_server_get_max_connections, dbus_server_get_n_connections):
keep track of current number of connections, and add API for
setting a max (but haven't implemented enforcing the max yet)
2003-01-18 Havoc Pennington <hp@pobox.com>
* dbus/dbus-transport-unix.c (unix_do_iteration): only do the
reading/writing if read_watch != NULL or write_watch != NULL.
* dbus/dbus-message.c (_dbus_message_loader_return_buffer): fix
the message loader code to actually load message->header and
message->body into the newly-created message.
* dbus/dbus-transport-unix.c (check_write_watch): fix a mem leak
in OOM case
* dbus/dbus-connection.c (dbus_connection_set_max_message_size)
(dbus_connection_get_max_message_size)
(dbus_connection_set_max_live_messages_size)
(dbus_connection_get_max_live_messages_size): implement some
resource limitation functions
* dbus/dbus-resources.c: new file implementing some of the
resource limits stuff
* dbus/dbus-message.c (dbus_message_iter_get_byte_array): add
missing docs, add @todo to handle OOM etc.
* dbus/dbus-marshal.c (_dbus_demarshal_byte_array): add missing
docs
2003-01-18 Havoc Pennington <hp@pobox.com>
* dbus/dbus-connection.c (dbus_connection_unref): disconnect the
connection if it hasn't been already.
* dbus/dbus-connection.h: kill off the idea of an ErrorFunction,
replace with DisconnectFunction.
2003-01-18 Havoc Pennington <hp@pobox.com>
Building --disable-verbose-mode --disable-asserts --disable-tests
cuts the library from 112K to 45K or so
* configure.in: check for varargs macro support,
add --enable-verbose-mode, --enable-asserts.
* dbus/dbus-internals.h (_dbus_assert): support
DBUS_DISABLE_ASSERT
(_dbus_verbose): support DBUS_ENABLE_VERBOSE_MODE
2003-01-18 Havoc Pennington <hp@pobox.com>
* dbus/dbus-test.c: include config.h so that tests actually run
* dbus/dbus-string.c: add assertions that stuff is 8-byte aligned,
so the failure mode when that assumption fails will be plenty
obvious.
2003-01-18 Havoc Pennington <hp@pobox.com>
* configure.in: default --enable-tests to $USE_MAINTAINER_MODE
* dbus/Makefile.am: fix it up so dubs-test-main.c is included in
the distribution
* test/Makefile.am: don't use special variable "TESTS" for echo-*
since we don't want to use those in make check
2003-01-15 Havoc Pennington <hp@redhat.com>
Release 0.2
* NEWS: update
2003-01-15 Havoc Pennington <hp@redhat.com>
* test/Makefile.am: fix so that test source code ends up in the
distribution on make distcheck
2003-01-15 Havoc Pennington <hp@redhat.com>
Release 0.1.
* NEWS: update
2003-01-15 Havoc Pennington <hp@redhat.com>
* dbus/dbus-test.c (dbus_internal_symbol_do_not_use_run_tests):
fix build when --disable-tests
* Makefile.am (EXTRA_DIST): put HACKING in here
* HACKING: document procedure for making a tarball release.
2003-01-14 Anders Carlsson <andersca@codefactory.se>
* bus/connection.c: (connection_error_handler),
(bus_connection_setup):
* bus/main.c: (main):
Make sure that the DBusConnectionData struct is NULLed
out to prevent a segfault.
* dbus/dbus-errors.c: (dbus_result_to_string):
* dbus/dbus-errors.h:
* dbus/dbus-message.c: (dbus_message_get_fields),
(dbus_message_get_fields_valist), (_dbus_message_test):
* dbus/dbus-message.h:
Make dbus_message_get_fields return a result code so we can
track invalid fields as well as oom.
2003-01-11 Havoc Pennington <hp@pobox.com>
* configure.in: change --enable-test/--enable-ansi action-if-given
to enable_foo=$enableval instead of enable_foo=yes
2003-01-08 Havoc Pennington <hp@pobox.com>
* dbus/dbus-string.c (_dbus_string_align_length): new function
* dbus/dbus-test-main.c: move main() for test app here
* dbus/dbus-test.c
(dbus_internal_symbol_do_not_use_run_tests): we have to export a
symbol to run tests, because dbus-test isn't in the main
library
Code review nitpicks.
* dbus/dbus-message.c (dbus_message_write_header): add newlines
for people with narrow emacs ;-). Assert client_serial was filled
in. Assert message->name != NULL.
(dbus_message_append_fields): have "first_field_type" arg separate
from va list, needed for C++ binding that also uses varargs IIRC
and helps with type safety
(dbus_message_new): add @todo about using DBusString to store
service/name internally
(dbus_message_new): don't leak ->service and ->name on OOM later
in the function
(dbus_message_unref): free the service name
(dbus_message_get_fields): same change to varargs
i.e. first_field_type
(_dbus_message_loader_return_buffer): assert that the message data
is aligned (if not it's a bug in our code). Put in verbose griping
about why we set corrupted = TRUE.
(decode_header_data): add FIXME that char* is evil. Was going to
add FIXME about evil locale-specific string.h strncmp, but just
switched to wacky string-as-uint32 optimization. Move check for
"no room for field name" above get_const_data_len() to avoid
assertion failure in get_const_data_len if we have trailing 2
bytes or the like. Check for service and name fields being
provided twice. Don't leak service/name on error. Require field
names to be aligned to 4 bytes.
* dbus/dbus-marshal.c: move byte swap stuff to header
(_dbus_pack_int32): uscore-prefix
(_dbus_unpack_int32): uscore-prefix
(_dbus_unpack_uint32): export
(_dbus_demarshal_string): add @todo complaining about use of
memcpy()
(_dbus_marshal_get_field_end_pos): add @todo about bad error
handling allowing corrupt data to go unchecked
2003-01-08 Havoc Pennington <hp@redhat.com>
* dbus/dbus-transport-unix.c (unix_do_iteration): add read/write
to the select() as needed for authentication. (should be using
_dbus_poll() not select, but for another day)
* dbus/dbus.h: include dbus/dbus-protocol.h
2003-01-08 Anders Carlsson <andersca@codefactory.se>
* dbus/Makefile.am (dbusinclude_HEADERS): Install
dbus-connection.h
2003-01-08 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-internals.c: (_dbus_type_to_string):
New function that returns a string describing a type.
* dbus/dbus-marshal.c: (_dbus_demarshal_byte_array):
* dbus/dbus-marshal.h:
* dbus/dbus-message.c: (dbus_message_get_fields_valist),
(dbus_message_iter_get_field_type), (dbus_message_iter_get_double),
(dbus_message_iter_get_byte_array):
* dbus/dbus-message.h:
Add new convenience functions for appending and getting message fields.
Also add demarshalling routines for byte arrays.
2003-01-07 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-connection-internal.h:
* dbus/dbus-connection.c: (_dbus_connection_new_for_transport),
(_dbus_connection_get_next_client_serial),
(dbus_connection_send_message):
* dbus/dbus-internals.h:
* dbus/dbus-marshal.c: (unpack_uint32), (dbus_unpack_int32),
(dbus_pack_int32), (_dbus_marshal_double), (_dbus_marshal_int32),
(_dbus_marshal_uint32), (_dbus_demarshal_double),
(_dbus_demarshal_int32), (_dbus_demarshal_uint32),
(_dbus_demarshal_string), (_dbus_marshal_get_field_end_pos),
(_dbus_verbose_bytes), (_dbus_marshal_test):
* dbus/dbus-marshal.h:
* dbus/dbus-message-internal.h:
* dbus/dbus-message.c: (_dbus_message_set_client_serial),
(dbus_message_write_header), (_dbus_message_lock),
(dbus_message_new), (dbus_message_ref), (dbus_message_unref),
(dbus_message_get_name), (dbus_message_append_int32),
(dbus_message_append_uint32), (dbus_message_append_double),
(dbus_message_append_string), (dbus_message_append_byte_array),
(dbus_message_get_fields_iter), (dbus_message_iter_ref),
(dbus_message_iter_unref), (dbus_message_iter_has_next),
(dbus_message_iter_next), (dbus_message_iter_get_field_type),
(dbus_message_iter_get_string), (dbus_message_iter_get_int32),
(dbus_message_iter_get_uint32), (dbus_message_iter_get_double),
(decode_header_data), (_dbus_message_loader_return_buffer),
(message_iter_test), (_dbus_message_test):
* dbus/dbus-message.h:
* dbus/dbus-protocol.h:
* dbus/dbus-test.c: (main):
* dbus/dbus-test.h:
* glib/test-dbus-glib.c: (message_handler), (main):
* test/echo-client.c: (main):
* test/watch.c: (check_messages):
Make messages sendable and receivable for real.
2003-01-07 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-marshal.c: (_dbus_marshal_double),
(_dbus_marshal_string), (_dbus_marshal_byte_array):
* dbus/dbus-message.c: (dbus_message_append_int32),
(dbus_message_append_uint32), (dbus_message_append_double),
(dbus_message_append_string), (dbus_message_append_byte_array):
Handle OOM restoration.
2003-01-07 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-marshal.c: (_dbus_marshal_string),
(_dbus_demarshal_string), (_dbus_marshal_test):
* dbus/dbus-marshal.h:
* dbus/dbus-message.c: (dbus_message_get_name),
Document these functions.
(dbus_message_append_int32), (dbus_message_append_uint32),
(dbus_message_append_double), (dbus_message_append_string),
(dbus_message_append_byte_array):
* dbus/dbus-message.h:
Add functions for adding message fields of different types.
* dbus/dbus-protocol.h:
Add the different types.
2003-01-05 Havoc Pennington <hp@pobox.com>
* bus/connection.c: implement routines for handling connections,
first thing is keeping a list of owned services on each connection
and setting up watches etc.
* bus/services.c: implement a mapping from service names to lists
of connections
* dbus/dbus-hash.c: add DBUS_HASH_POINTER
* dbus/dbus-threads.c (dbus_static_mutex_lock): add functions
to use static mutexes for global data
* dbus/dbus-connection.c (dbus_connection_set_data): add new
collection of functions to set/get application-specific data
on the DBusConnection.
2003-01-04 Havoc Pennington <hp@pobox.com>
* dbus/dbus-sysdeps.c (_dbus_sleep_milliseconds): new function
(_dbus_poll): new function
* dbus/dbus-internals.h (_DBUS_STRUCT_OFFSET): new macro
copied from GLib
* bus/loop.c: initial code for the daemon main loop
2003-01-04 Havoc Pennington <hp@pobox.com>
* test/watch.c (error_handler): make it safe if the error handler
is called multiple times (if we s/error handler/disconnect
handler/ we should just guarantee it's called only once)
* dbus/dbus-transport.c (_dbus_transport_disconnect): call the
error handler on disconnect (it's quite possible we should
just change the error handler to a "disconnect handler," I'm
not sure we have any other meaningful errors)
* configure.in: check for getpwnam_r
* dbus/dbus-transport.c, dbus/dbus-transport-unix.c,
dbus/dbus-auth.c: add credentials support, add EXTERNAL auth
mechanism as in SASL spec, using socket credentials
* dbus/dbus-sysdeps.c (_dbus_read_credentials_unix_socket): new function
(_dbus_send_credentials_unix_socket): new function
* dbus/dbus-sysdeps.c (_dbus_accept_unix_socket): rename just
dbus_accept()
(_dbus_write): only check errno if <0 returned
(_dbus_write_two): ditto
2003-01-02 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-marshal.c: (_dbus_marshal_utf8_string),
(_dbus_marshal_byte_array), (_dbus_demarshal_utf8_string),
(_dbus_marshal_test):
* dbus/dbus-marshal.h:
Add _dbus_marshal_byte_array and rename _dbus_marshal_string
to _dbus_marshal_utf8_string. Also fix some tests.
2002-12-28 Harri Porten <porten@kde.org>
* configure.in: added check for C++ compiler and a very cheesy
check for the Qt integration
* Makefile.am (SUBDIRS): compile qt subdir if support is enabled
* qt/Makefile.am: added
* qt/.cvsignore: added
* qt/dbus-qthread.cc, qt/dbus-qthread.cpp: renamed former to
latter, added #ifdef QT_THREAD_SUPPORT guard.
* dbus/Makefile.am: added missing headers for make dist
2002-12-28 Kristian Rietveld <kris@gtk.org>
* dbus/Makefile.am: fixup export-symbols-regex.
2002-12-27 Anders Carlsson <andersca@codefactory.se>
* acinclude.m4: Add this file and put the
PKG_CHECK_MODULE macro in it.
2002-12-27 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-marshal.c: (_dbus_marshal_string),
(_dbus_demarshal_double), (_dbus_demarshal_int32),
(_dbus_demarshal_uint32), (_dbus_demarshal_string),
(_dbus_marshal_test):
Make the demarshalling routines align the pos argument.
Add string marshalling tests and fix the obvious bugs
discovered.
2002-12-26 Havoc Pennington <hp@pobox.com>
* dbus/dbus-auth.c: fixes fixes fixes
* dbus/dbus-transport-unix.c: wire up support for
encoding/decoding data on the wire
* dbus/dbus-auth.c (_dbus_auth_encode_data)
(_dbus_auth_decode_data): append to target string
instead of nuking it.
2002-12-26 Havoc Pennington <hp@pobox.com>
* dbus/dbus-marshal.h (DBUS_COMPILER_BYTE_ORDER): #ifdef
WORDS_BIGENDIAN then compiler byte order is DBUS_BIG_ENDIAN,
doh
* dbus/dbus-marshal.c: Add macros to do int swapping in-place and
avoid swap_bytes() overhead (ignoring possible assembly stuff for
now). Main point is because I wanted unpack_uint32 to implement
_dbus_verbose_bytes
(_dbus_verbose_bytes): new function
* dbus/dbus-string.c (_dbus_string_validate_ascii): new function
* dbus/dbus-message.c (_dbus_message_loader_get_is_corrupted): add
mechanism to handle a corrupt message stream
(_dbus_message_loader_new): fix preallocation to only prealloc,
not prelengthen
* dbus/dbus-string.c (_dbus_string_skip_blank): fix this function
(_dbus_string_test): enhance tests for copy/move and fix the
functions
* dbus/dbus-transport-unix.c: Hold references in more places to
avoid reentrancy problems
* dbus/dbus-transport.c: ditto
* dbus/dbus-connection.c (dbus_connection_dispatch_message): don't
leak reference count in no-message case
* test/watch.c (do_mainloop): handle adding/removing watches
during iteration over the watches. Also, ref the connection/server
stored on a watch, so we don't try to mangle a destroyed one.
* dbus/dbus-transport-unix.c (do_authentication): perform
authentication
* dbus/dbus-auth.c (get_state): add a state
AUTHENTICATED_WITH_UNUSED_BYTES and return it if required
(_dbus_auth_get_unused_bytes): append the unused bytes
to the passed in string, rather than prepend
* dbus/dbus-transport.c (_dbus_transport_init_base): create
the auth conversation DBusAuth
* dbus/dbus-transport-unix.c (_dbus_transport_new_for_fd)
(_dbus_transport_new_for_domain_socket): when creating a
transport, pass in whether it's a client-side or server-side
transport so we know which DBusAuth to create
2002-12-03 Havoc Pennington <hp@pobox.com>
* dbus/dbus-transport-unix.c (unix_finalize): finalize base
_after_ finalizing the derived members
(unix_connection_set): unref watch if we fail to add it
* dbus/dbus-connection.c (dbus_connection_unref): delete the
transport first, so that the connection owned by the
transport will be valid as the transport finalizes.
* dbus/dbus-transport-unix.c (unix_finalize): free the write_watch
if necessary, and remove watches from the connection.
* dbus/dbus-watch.c (_dbus_watch_list_free): improve a comment
2002-12-26 Anders Carlsson <andersca@codefactory.se>
* dbus/dbus-marshal.c: (_dbus_marshal_string),
(_dbus_demarshal_double), (_dbus_demarshal_int32),
(_dbus_demarshal_uint32), (_dbus_demarshal_string),
(_dbus_marshal_test):
* dbus/dbus-marshal.h:
Add string marshal functions and have the demarshal functions
return the new position.
2002-12-25 Havoc Pennington <hp@pobox.com>
* doc/dbus-sasl-profile.txt: docs on the authentication protocol,
it is a simple protocol that just maps directly to SASL.
* dbus/dbus-auth.h, dbus/dbus-auth.c: authentication protocol
initial implementation, not actually used yet.
* dbus/dbus-string.c (_dbus_string_find): new function
(_dbus_string_equal): new function
(_dbus_string_base64_encode): new function
(_dbus_string_base64_decode): new function
2002-12-25 Anders Carlsson <andersca@codefactory.se>
* dbus/Makefile.am:
* dbus/dbus-marshal.c: (swap_bytes), (_dbus_marshal_double),
(_dbus_marshal_int32), (_dbus_marshal_uint32),
(_dbus_demarshal_double), (_dbus_demarshal_int32),
(_dbus_demarshal_uint32), (_dbus_marshal_test):
* dbus/dbus-marshal.h:
* dbus/dbus-protocol.h:
* dbus/dbus-test.c: (main):
* dbus/dbus-test.h:
Add un-optimized marshalling/demarshalling routines.
2002-12-25 Harri Porten <porten@kde.org>
* qt/dbus-qt.h: adjusted ctor and getter to KDE/Qt conventions
2002-12-24 Zack Rusin <zack@kde.org>
* qt/dbus-qthread.cc: adding - integrates QMutex into Dbus
* qt/dbus-qt.h: skeleton with two sample implemenatation of the
main loop stuff
2002-12-24 Havoc Pennington <hp@pobox.com>
* glib/dbus-gthread.c: fix include
* glib/dbus-glib.h: rename DBusMessageHandler for now.
I think glib API needs to change, though, as you don't
want to use DBusMessageFunction, you want to use the
DBusMessageHandler object. Probably
dbus_connection_open_with_g_main_loop()
and dbus_connection_setup_g_main_loop() or something like that
(but think of better names...) that just create a connection
that has watch/timeout functions etc. already set up.
* dbus/dbus-connection.c
(dbus_connection_send_message_with_reply): new function just to
show how the message handler helps us deal with replies.
* dbus/dbus-list.c (_dbus_list_remove_last): new function
* dbus/dbus-string.c (_dbus_string_test): free a string that
wasn't
* dbus/dbus-hash.c: use memory pools for the hash entries
(rebuild_table): be more paranoid about overflow, and
shrink table when we can
(_dbus_hash_test): reduce number of sprintfs and write
valid C89. Add tests for case where we grow and then
shrink the hash table.
* dbus/dbus-mempool.h, dbus/dbus-mempool.c: memory pools
* dbus/dbus-connection.c (dbus_connection_register_handler)
(dbus_connection_unregister_handler): new functions
* dbus/dbus-message.c (dbus_message_get_name): new
* dbus/dbus-list.c: fix docs typo
* dbus/dbus-message-handler.h, dbus/dbus-message-handler.c:
an object representing a handler for messages.
2002-12-16 Anders Carlsson <andersca@codefactory.se>
* glib/dbus-glib.h:
* glib/dbus-gthread.c: (dbus_gthread_init):
Don't use the gdbus prefix for public functions.
2002-12-16 Anders Carlsson <andersca@codefactory.se>
* Makefile.am:
* configure.in:
Add GLib checks and fixup .pc files
* glib/Makefile.am:
* glib/dbus-glib.h:
* glib/dbus-gmain.c: (gdbus_connection_prepare),
(gdbus_connection_check), (gdbus_connection_dispatch),
(gdbus_add_connection_watch), (gdbus_remove_connection_watch),
(dbus_connection_gsource_new):
* glib/dbus-gthread.c: (dbus_gmutex_new), (dbus_gmutex_free),
(dbus_gmutex_lock), (dbus_gmutex_unlock), (dbus_gthread_init):
* glib/test-dbus-glib.c: (message_handler), (main):
Add GLib support.
2002-12-15 Harri Porten <porten@kde.org>
* autogen.sh: check for libtoolize before attempting to use it
* dbus/dbus-transport-unix.c: include <sys/time.h> for timeval
struct.
* .cvsignore: ignore more stamp files
* dbus/dbus-watch.c (_dbus_watch_list_new): fixed doc error
* test/Makefile.am: added -I$(top_srcdir) to be able to compile
without make install.
2002-12-15 Havoc Pennington <hp@pobox.com>
* dbus/dbus-threads.c: add thread stubs that a higher library
layer can fill in. e.g. the GLib wrapper might fill them in with
GThread stuff. We still need to use this thread API to
thread-safe-ize the library.
2002-12-12 Havoc Pennington <hp@pobox.com>
* dbus/dbus-transport-unix.c, dbus/dbus-server-unix.c: use the
below new interfaces and include fewer system headers.
* dbus/dbus-sysdeps.c (_dbus_read): new function
(_dbus_write): new function
(_dbus_write_two): new function
(_dbus_connect_unix_socket): new function
(_dbus_listen_unix_socket): new function
* dbus/dbus-message-internal.h: change interfaces to use
DBusString
2002-12-11 Havoc Pennington <hp@pobox.com>
* dbus/dbus-types.h: add dbus_unichar
* dbus/dbus-internals.c (_dbus_verbose): use _dbus_getenv
* dbus/dbus-connection.c (dbus_connection_send_message): return
TRUE on success
* dbus/dbus-transport.c: include dbus-watch.h
* dbus/dbus-connection.c: include dbus-message-internal.h
* HACKING: add file with coding guidelines stuff.
* dbus/dbus-string.h, dbus/dbus-string.c: Encapsulate all string
handling here, for security purposes (as in vsftpd). Not actually
using this class yet.
* dbus/dbus-sysdeps.h, dbus/dbus-sysdeps.c: Encapsulate all
system/libc usage here, as in vsftpd, for ease of auditing (and
should also simplify portability). Haven't actually moved all the
system/libc usage into here yet.
2002-11-25 Havoc Pennington <hp@pobox.com>
* dbus/dbus-internals.c (_dbus_verbose): fix to not
always print the first verbose message.
2002-11-24 Havoc Pennington <hp@pobox.com>
* test/echo-client.c, test/echo-server.c: cheesy test
clients.
* configure.in (AC_CHECK_FUNCS): check for writev
* dbus/dbus-message.c (_dbus_message_get_network_data): new
function
* dbus/dbus-list.c (_dbus_list_foreach): new function
* dbus/dbus-internals.c (_dbus_verbose): new function
* dbus/dbus-server.c, dbus/dbus-server.h: public object
representing a server that listens for connections.
* dbus/.cvsignore: create
* dbus/dbus-errors.h, dbus/dbus-errors.c:
public API for reporting errors
* dbus/dbus-connection.h, dbus/dbus-connection.c:
public object representing a connection that
sends/receives messages. (Same object used for
both client and server.)
* dbus/dbus-transport.h, dbus/dbus-transport.c:
Basic abstraction for different kinds of stream
that we might read/write messages from.
2002-11-23 Havoc Pennington <hp@pobox.com>
* dbus/dbus-internals.h (_DBUS_INT_MAX): add _DBUS_INT_MIN
_DBUS_INT_MAX
* dbus/dbus-test.c (main): add list test, and include
dbus-test.h as intended
* dbus/dbus-hash.c (_dbus_hash_table_remove_string)
(_dbus_hash_table_remove_int): return value indicates
whether the entry existed to remove
* dbus/dbus-list.c: add linked list utility class,
with docs and tests
* dbus/dbus-hash.c: add TODO item about shrinking the hash bucket
array sometimes.
2002-11-23 Havoc Pennington <hp@pobox.com>
* Doxyfile.in (INCLUDE_FILE_PATTERNS): expand DBUS_BEGIN_DECLS/
DBUS_END_DECLS to nothing, that should fix this once and for all
* Doxyfile.in (JAVADOC_AUTOBRIEF): set to YES
* dbus/dbus-message.c, dbus/dbus-hash.c:
add some missing @brief
2002-11-23 Havoc Pennington <hp@pobox.com>
* dbus/dbus-message.h: put semicolons after DEBUG_BEGIN_DECLS
to avoid confusing Doxygen
* dbus/dbus-hash.c: @} not }@
* dbus/dbus-message.c (struct DBusMessage): split out
internals docs
2002-11-23 Havoc Pennington <hp@pobox.com>
* configure.in: pile on more warning flags if using gcc
* Doxyfile.in (EXTRACT_STATIC): set to NO, so we don't have
to document static functions
* configure.in: add summary to end of configure so it
looks nice and attractive
* dbus/dbus-hash.c: finish implementation and write unit
tests and docs
* configure.in: add --enable-tests to enable unit tests
* dbus/dbus-test.c: test program to run unit tests
for all files in dbus/*, initially runs a test for
dbus-hash.c
* dbus/dbus-internals.h: file to hold some internal utility stuff
2002-11-22 Havoc Pennington <hp@redhat.com>
* dbus/dbus-hash.c: copy in Tcl hash table, not yet
"ported" away from Tcl
* dbus/dbus-types.h: header for types such as dbus_bool_t
2002-11-22 Havoc Pennington <hp@redhat.com>
* dbus/dbus.h: fixups for doc warnings
* Doxyfile.in (FILE_PATTERNS): we need to scan .h to pick up
macros
(QUIET): make it quiet so we can see warnings
* dbus/dbus-memory.c: teach D-BUS to allocate and free memory
2002-11-22 Havoc Pennington <hp@redhat.com>
* Makefile.am: include "Doxyfile" target in all-local
* configure.in: generate the Doxyfile
* Doxyfile.in: move Doxyfile here, so we can use
configure to generate a Doxyfile with the right
version number etc.
2002-11-22 Havoc Pennington <hp@redhat.com>
* dbus/dbus-message.c: move inline docs into .c file
* Doxyfile (OUTPUT_DIRECTORY): move output to doc/api
so all docs are under doc/
(MAN_EXTENSION): generate man pages. Use extension
".3dbus" which matches ".3qt" on my system,
I guess this is OK, I don't know really.
(FILE_PATTERNS): look for .c files not .h, makes sense
for plain C I think
2002-11-22 Havoc Pennington <hp@pobox.com>
* Makefile.am (SUBDIRS): rename subdir "server" to "bus"
because any app can be a server, and any app can be a client,
the bus is a special kind of server.
Thu Nov 21 23:35:31 2002 Zack Rusin <zack@kde.org>
* Doxyfile : adding. Still needs Makefile rules to be generated
automatically (just run "doxygen" in the toplevel dir for now to
generate docs)
* dbus/dbus-message.h : Adding sample docs (javadoc since
resembles gtk-doc a little more)
* dbus/dbus.h : Adding sample docs
2002-11-21 Havoc Pennington <hp@redhat.com>
* dbus/Makefile.am (INCLUDES): define DBUS_COMPILATION
so we can allow ourselves to include files directly,
instead of having to use dbus.h
* dbus/dbus.h: fill in
* dbus/dbus-message.h: sketch out a sample header file.
Include griping if you include it directly instead of
via dbus.h
* dbus/dbus-macros.h: new file with macros for extern "C",
TRUE/FALSE, NULL, etc.
* doc/file-boilerplate.c: put include guards in here
2002-11-21 Havoc Pennington <hp@redhat.com>
* doc/file-boilerplate.c: include both AFL and GPL boilerplate.
* COPYING: include the GPL as well, and license code
under both AFL and GPL.
2002-11-21 Havoc Pennington <hp@redhat.com>
* acconfig.h: get rid of this
* autogen.sh (run_configure): add --no-configure option
* configure.in: remove AC_ARG_PROGRAM to make
autoconf complain less. add AC_PREREQ.
add AC_DEFINE third arg.
2002-11-21 Anders Carlsson <andersca@codefactory.se>
* doc/Makefile.am:
Fix references so we can distcheck.
2002-11-21 Havoc Pennington <hp@redhat.com>
* Initial module creation