# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = README $(am__configure_deps) $(srcdir)/Doxyfile.in \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/config.h.in $(srcdir)/dbus-1.pc.in \
$(top_srcdir)/configure \
$(top_srcdir)/test/data/valid-config-files/debug-allow-all-sha1.conf.in \
$(top_srcdir)/test/data/valid-config-files/debug-allow-all.conf.in \
$(top_srcdir)/test/data/valid-service-files/debug-echo.service.in \
$(top_srcdir)/test/data/valid-service-files/debug-segfault.service.in \
$(top_srcdir)/test/data/valid-service-files/debug-shell-echo-fail.service.in \
$(top_srcdir)/test/data/valid-service-files/debug-shell-echo-success.service.in \
AUTHORS COPYING ChangeLog INSTALL NEWS config.guess config.sub \
depcomp install-sh ltmain.sh missing
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = Doxyfile dbus-1.pc \
test/data/valid-config-files/debug-allow-all.conf \
test/data/valid-config-files/debug-allow-all-sha1.conf \
test/data/valid-service-files/debug-echo.service \
test/data/valid-service-files/debug-segfault.service \
test/data/valid-service-files/debug-shell-echo-success.service \
test/data/valid-service-files/debug-shell-echo-fail.service
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-exec-recursive install-info-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
pkgconfigDATA_INSTALL = $(INSTALL_DATA)
DATA = $(pkgconfig_DATA)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d $(distdir) \
|| { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DBUS_BINDIR = @DBUS_BINDIR@
DBUS_BUILD_TESTS_FALSE = @DBUS_BUILD_TESTS_FALSE@
DBUS_BUILD_TESTS_TRUE = @DBUS_BUILD_TESTS_TRUE@
DBUS_BUS_CFLAGS = @DBUS_BUS_CFLAGS@
DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_FALSE = @DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_FALSE@
DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_TRUE = @DBUS_BUS_ENABLE_DNOTIFY_ON_LINUX_TRUE@
DBUS_BUS_ENABLE_KQUEUE_FALSE = @DBUS_BUS_ENABLE_KQUEUE_FALSE@
DBUS_BUS_ENABLE_KQUEUE_TRUE = @DBUS_BUS_ENABLE_KQUEUE_TRUE@
DBUS_BUS_LIBS = @DBUS_BUS_LIBS@
DBUS_CLIENT_CFLAGS = @DBUS_CLIENT_CFLAGS@
DBUS_CLIENT_LIBS = @DBUS_CLIENT_LIBS@
DBUS_CONSOLE_AUTH_DIR = @DBUS_CONSOLE_AUTH_DIR@
DBUS_CONSOLE_OWNER_FILE = @DBUS_CONSOLE_OWNER_FILE@
DBUS_DAEMONDIR = @DBUS_DAEMONDIR@
DBUS_DATADIR = @DBUS_DATADIR@
DBUS_DOXYGEN_DOCS_ENABLED_FALSE = @DBUS_DOXYGEN_DOCS_ENABLED_FALSE@
DBUS_DOXYGEN_DOCS_ENABLED_TRUE = @DBUS_DOXYGEN_DOCS_ENABLED_TRUE@
DBUS_GCOV_ENABLED_FALSE = @DBUS_GCOV_ENABLED_FALSE@
DBUS_GCOV_ENABLED_TRUE = @DBUS_GCOV_ENABLED_TRUE@
DBUS_HAVE_INT64 = @DBUS_HAVE_INT64@
DBUS_INIT_SCRIPTS_RED_HAT_FALSE = @DBUS_INIT_SCRIPTS_RED_HAT_FALSE@
DBUS_INIT_SCRIPTS_RED_HAT_TRUE = @DBUS_INIT_SCRIPTS_RED_HAT_TRUE@
DBUS_INIT_SCRIPTS_SLACKWARE_FALSE = @DBUS_INIT_SCRIPTS_SLACKWARE_FALSE@
DBUS_INIT_SCRIPTS_SLACKWARE_TRUE = @DBUS_INIT_SCRIPTS_SLACKWARE_TRUE@
DBUS_INT16_TYPE = @DBUS_INT16_TYPE@
DBUS_INT32_TYPE = @DBUS_INT32_TYPE@
DBUS_INT64_CONSTANT = @DBUS_INT64_CONSTANT@
DBUS_INT64_TYPE = @DBUS_INT64_TYPE@
DBUS_PATH_OR_ABSTRACT = @DBUS_PATH_OR_ABSTRACT@
DBUS_SESSION_SOCKET_DIR = @DBUS_SESSION_SOCKET_DIR@
DBUS_SYSTEM_BUS_DEFAULT_ADDRESS = @DBUS_SYSTEM_BUS_DEFAULT_ADDRESS@
DBUS_SYSTEM_PID_FILE = @DBUS_SYSTEM_PID_FILE@
DBUS_SYSTEM_SOCKET = @DBUS_SYSTEM_SOCKET@
DBUS_TEST_CFLAGS = @DBUS_TEST_CFLAGS@
DBUS_TEST_LIBS = @DBUS_TEST_LIBS@
DBUS_UINT64_CONSTANT = @DBUS_UINT64_CONSTANT@
DBUS_USER = @DBUS_USER@
DBUS_USE_EXPAT_FALSE = @DBUS_USE_EXPAT_FALSE@
DBUS_USE_EXPAT_TRUE = @DBUS_USE_EXPAT_TRUE@
DBUS_USE_LIBXML_FALSE = @DBUS_USE_LIBXML_FALSE@
DBUS_USE_LIBXML_TRUE = @DBUS_USE_LIBXML_TRUE@
DBUS_XML_DOCS_ENABLED_FALSE = @DBUS_XML_DOCS_ENABLED_FALSE@
DBUS_XML_DOCS_ENABLED_TRUE = @DBUS_XML_DOCS_ENABLED_TRUE@
DBUS_X_CFLAGS = @DBUS_X_CFLAGS@
DBUS_X_LIBS = @DBUS_X_LIBS@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DOXYGEN = @DOXYGEN@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXPANDED_BINDIR = @EXPANDED_BINDIR@
EXPANDED_DATADIR = @EXPANDED_DATADIR@
EXPANDED_LIBDIR = @EXPANDED_LIBDIR@
EXPANDED_LOCALSTATEDIR = @EXPANDED_LOCALSTATEDIR@
EXPANDED_SYSCONFDIR = @EXPANDED_SYSCONFDIR@
F77 = @F77@
FFLAGS = @FFLAGS@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
HAVE_CONSOLE_OWNER_FILE_FALSE = @HAVE_CONSOLE_OWNER_FILE_FALSE@
HAVE_CONSOLE_OWNER_FILE_TRUE = @HAVE_CONSOLE_OWNER_FILE_TRUE@
HAVE_SELINUX_FALSE = @HAVE_SELINUX_FALSE@
HAVE_SELINUX_TRUE = @HAVE_SELINUX_TRUE@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBXML_CFLAGS = @LIBXML_CFLAGS@
LIBXML_LIBS = @LIBXML_LIBS@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_AGE = @LT_AGE@
LT_CURRENT = @LT_CURRENT@
LT_REVISION = @LT_REVISION@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
RANLIB = @RANLIB@
R_DYNAMIC_LDFLAG = @R_DYNAMIC_LDFLAG@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TEST_BUS_BINARY = @TEST_BUS_BINARY@
TEST_EXIT_BINARY = @TEST_EXIT_BINARY@
TEST_SEGFAULT_BINARY = @TEST_SEGFAULT_BINARY@
TEST_SERVICE_BINARY = @TEST_SERVICE_BINARY@
TEST_SERVICE_DIR = @TEST_SERVICE_DIR@
TEST_SHELL_SERVICE_BINARY = @TEST_SHELL_SERVICE_BINARY@
TEST_SLEEP_FOREVER_BINARY = @TEST_SLEEP_FOREVER_BINARY@
TEST_SOCKET_DIR = @TEST_SOCKET_DIR@
VERSION = @VERSION@
XMLTO = @XMLTO@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
SUBDIRS = dbus bus doc tools test
DIST_SUBDIRS = dbus bus doc tools test
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = dbus-1.pc
DISTCLEANFILES = \
dbus-1.pc
EXTRA_DIST = \
HACKING \
dbus-1.pc.in \
cleanup-man-pages.sh
@DBUS_GCOV_ENABLED_TRUE@GCOV_DIRS = dbus bus
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh:
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
cd $(srcdir) && $(AUTOMAKE) --gnu \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_srcdir) && $(AUTOHEADER)
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
dbus-1.pc: $(top_builddir)/config.status $(srcdir)/dbus-1.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
test/data/valid-config-files/debug-allow-all.conf: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-config-files/debug-allow-all.conf.in
cd $(top_builddir) && $(SHELL) ./config.status $@
test/data/valid-config-files/debug-allow-all-sha1.conf: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-config-files/debug-allow-all-sha1.conf.in
cd $(top_builddir) && $(SHELL) ./config.status $@
test/data/valid-service-files/debug-echo.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files/debug-echo.service.in
cd $(top_builddir) && $(SHELL) ./config.status $@
test/data/valid-service-files/debug-segfault.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files/debug-segfault.service.in
cd $(top_builddir) && $(SHELL) ./config.status $@
test/data/valid-service-files/debug-shell-echo-success.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files/debug-shell-echo-success.service.in
cd $(top_builddir) && $(SHELL) ./config.status $@
test/data/valid-service-files/debug-shell-echo-fail.service: $(top_builddir)/config.status $(top_srcdir)/test/data/valid-service-files/debug-shell-echo-fail.service.in
cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
uninstall-info-am:
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
@list='$(pkgconfig_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
$(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
done
uninstall-pkgconfigDATA:
@$(NORMAL_UNINSTALL)
@list='$(pkgconfig_DATA)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
done
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
mkdir $(distdir)
$(mkdir_p) $(distdir)/. $(distdir)/bus $(distdir)/dbus $(distdir)/test/data/valid-config-files $(distdir)/test/data/valid-service-files
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(mkdir_p) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
distdir) \
|| exit 1; \
fi; \
done
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& cd $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA) config.h all-local
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
test -z "$$dir" || $(mkdir_p) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am: install-pkgconfigDATA
install-exec-am:
install-info: install-info-recursive
install-man:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-info-am uninstall-pkgconfigDATA
uninstall-info: uninstall-info-recursive
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-local \
am--refresh check check-am clean clean-generic clean-libtool \
clean-recursive ctags ctags-recursive dist dist-all dist-bzip2 \
dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
distclean-generic distclean-hdr distclean-libtool \
distclean-recursive distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-exec \
install-exec-am install-info install-info-am install-man \
install-pkgconfigDATA install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic maintainer-clean-recursive \
mostlyclean mostlyclean-generic mostlyclean-libtool \
mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am uninstall-info-am \
uninstall-pkgconfigDATA
all-local: Doxyfile
@DBUS_GCOV_ENABLED_TRUE@clean-gcov:
@DBUS_GCOV_ENABLED_TRUE@ find -name "*.da" -o -name "*.gcov" | xargs rm || true
@DBUS_GCOV_ENABLED_TRUE@clean-bbg:
@DBUS_GCOV_ENABLED_TRUE@ find -name "*.bbg" -o -name "*.bb" | xargs rm || true
@DBUS_GCOV_ENABLED_TRUE@.PHONY: coverage-report.txt
@DBUS_GCOV_ENABLED_TRUE@coverage-report.txt:
@DBUS_GCOV_ENABLED_TRUE@ BBG_FILES=`find $(GCOV_DIRS) -name "*.bbg" -o -name "*.gcno"` ; \
@DBUS_GCOV_ENABLED_TRUE@ C_FILES= ; \
@DBUS_GCOV_ENABLED_TRUE@ for F in $$BBG_FILES ; do \
@DBUS_GCOV_ENABLED_TRUE@ F_nolibs=`echo $$F | sed -e 's/.libs\///g'` ; \
@DBUS_GCOV_ENABLED_TRUE@ C=`echo $$F_nolibs | sed -e 's/.bbg/.c/g' | sed -e 's/.gcno/.c/g'` ; \
@DBUS_GCOV_ENABLED_TRUE@ B=`basename $$F .bbg` ; \
@DBUS_GCOV_ENABLED_TRUE@ D=`dirname $$F` ; \
@DBUS_GCOV_ENABLED_TRUE@ DA=`echo $$F | sed -e 's/.bbg/.da/g'` ; \
@DBUS_GCOV_ENABLED_TRUE@ DA_libs=`echo $$D/.libs/$$B/.da` ; \
@DBUS_GCOV_ENABLED_TRUE@ if test -e $$DA || test -e $$DA_libs; then \
@DBUS_GCOV_ENABLED_TRUE@ C_FILES="$$C_FILES $$C" ; \
@DBUS_GCOV_ENABLED_TRUE@ fi ; \
@DBUS_GCOV_ENABLED_TRUE@ done ; \
@DBUS_GCOV_ENABLED_TRUE@ echo $$C_FILES ; \
@DBUS_GCOV_ENABLED_TRUE@ $(top_builddir)/test/decode-gcov --report $$C_FILES > coverage-report.txt
@DBUS_GCOV_ENABLED_TRUE@check-coverage: clean-gcov all check coverage-report.txt
@DBUS_GCOV_ENABLED_TRUE@ cat coverage-report.txt
@DBUS_GCOV_ENABLED_FALSE@coverage-report.txt:
@DBUS_GCOV_ENABLED_FALSE@ echo "Need to reconfigure with --enable-gcov"
@DBUS_GCOV_ENABLED_FALSE@check-coverage:
@DBUS_GCOV_ENABLED_FALSE@ echo "Need to reconfigure with --enable-gcov"
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: