$! $! MAKEAPPS.COM $! Written By: Robert Byer $! Vice-President $! A-Com Computing, Inc. $! byer@mail.all-net.net $! $! Changes by Richard Levitte <richard@levitte.org> $! Zoltan Arpadffy <zoli@polarhome.com> $! $! This command files compiles and creates all the various different $! "application" programs for the different types of encryption for OpenSSL. $! The EXE's are placed in the directory [.xxx.EXE.APPS] where "xxx" denotes $! ALPHA, IA64 or VAX, depending on your machine architecture. $! $! It was written so it would try to determine what "C" compiler to $! use or you can specify which "C" compiler to use. $! $! Specify DEBUG or NODEBUG as P1 to compile with or without debugger $! information. $! $! Specify which compiler at P2 to try to compile under. $! $! VAXC For VAX C. $! DECC For DEC C. $! GNUC For GNU C. $! $! If you don't specify a compiler, it will try to determine which $! "C" compiler to use. $! $! P3, if defined, sets a TCP/IP library to use, through one of the following $! keywords: $! $! UCX for UCX $! SOCKETSHR for SOCKETSHR+NETLIB $! TCPIP for TCPIP (post UCX) $! $! P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up) $! $! P5, if defined, sets a choice of programs to compile. $! $! $! Define A TCP/IP Library That We Will Need To Link To. $! (That Is, If We Need To Link To One.) $! $ TCPIP_LIB = "" $! $! Check What Architecture We Are Using. $! $ IF (F$GETSYI("CPU").LT.128) $ THEN $! $! The Architecture Is VAX. $! $ ARCH = "VAX" $! $! Else... $! $ ELSE $! $! The Architecture Is Alpha, IA64 or whatever comes in the future. $! $ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE") $ IF (ARCH .EQS. "") THEN ARCH = "UNK" $! $! End The Architecture Check. $! $ ENDIF $! $! Define what programs should be compiled $! $ PROGRAMS := OPENSSL $! $! Define The CRYPTO Library. $! $ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO.OLB $! $! Define The SSL Library. $! $ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL.OLB $! $! Define The OBJ Directory. $! $ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.APPS] $! $! Define The EXE Directory. $! $ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.APPS] $! $! Check To Make Sure We Have Valid Command Line Parameters. $! $ GOSUB CHECK_OPTIONS $! $! Initialise logical names and such $! $ GOSUB INITIALISE $! $! Tell The User What Kind of Machine We Run On. $! $ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine." $! $! Check To See If The OBJ Directory Exists. $! $ IF (F$PARSE(OBJ_DIR).EQS."") $ THEN $! $! It Dosen't Exist, So Create It. $! $ CREATE/DIRECTORY 'OBJ_DIR' $! $! End The OBJ Directory Check. $! $ ENDIF $! $! Check To See If The EXE Directory Exists. $! $ IF (F$PARSE(EXE_DIR).EQS."") $ THEN $! $! It Dosen't Exist, So Create It. $! $ CREATE/DIRECTORY 'EXE_DIR' $! $! End The EXE Directory Check. $! $ ENDIF $! $! Check To See If We Have The Proper Libraries. $! $ GOSUB LIB_CHECK $! $! Check To See If We Have A Linker Option File. $! $ GOSUB CHECK_OPT_FILE $! $! Define The Application Files. $! NOTE: Some might think this list ugly. However, it's made this way to $! reflect the E_OBJ variable in Makefile as closely as possible, thereby $! making it fairly easy to verify that the lists are the same. $! $ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+- "CA,PKCS7,CRL2P7,CRL,"+- "RSA,RSAUTL,DSA,DSAPARAM,EC,ECPARAM,"+- "X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+- "S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+- "CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ - "SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS" $ TCPIP_PROGRAMS = ",," $ IF COMPILER .EQS. "VAXC" THEN - TCPIP_PROGRAMS = ",OPENSSL," $! $! Setup exceptional compilations $! $ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT," $! $ PHASE := LIB $! $ RESTART: $! $! Define An App Counter And Set It To "0". $! $ APP_COUNTER = 0 $! $! Top Of The App Loop. $! $ NEXT_APP: $! $! Make The Application File Name $! $ CURRENT_APP = F$EDIT(F$ELEMENT(APP_COUNTER,",",PROGRAMS),"TRIM") $! $! Create The Executable File Name. $! $ EXE_FILE = EXE_DIR + CURRENT_APP + ".EXE" $! $! Check To See If We Are At The End Of The File List. $! $ IF (CURRENT_APP.EQS.",") $ THEN $ IF (PHASE.EQS."LIB") $ THEN $ PHASE := APP $ GOTO RESTART $ ELSE $ GOTO APP_DONE $ ENDIF $ ENDIF $! $! Increment The Counter. $! $ APP_COUNTER = APP_COUNTER + 1 $! $! Decide if we're building the object files or not. $! $ IF (PHASE.EQS."LIB") $ THEN $! $! Define A Library File Counter And Set It To "-1". $! -1 Means The Application File Name Is To Be Used. $! $ LIB_COUNTER = -1 $! $! Create a .OPT file for the object files $! $ OPEN/WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT $! $! Top Of The File Loop. $! $ NEXT_LIB: $! $! O.K, Extract The File Name From The File List. $! $ IF LIB_COUNTER .GE. 0 $ THEN $ FILE_NAME = F$EDIT(F$ELEMENT(LIB_COUNTER,",",LIB_'CURRENT_APP'),"TRIM") $ ELSE $ FILE_NAME = CURRENT_APP $ ENDIF $! $! Check To See If We Are At The End Of The File List. $! $ IF (FILE_NAME.EQS.",") $ THEN $ CLOSE OBJECTS $ GOTO NEXT_APP $ ENDIF $! $! Increment The Counter. $! $ LIB_COUNTER = LIB_COUNTER + 1 $! $! Create The Source File Name. $! $ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C" $! $! Create The Object File Name. $! $ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ" $ ON WARNING THEN GOTO NEXT_LIB $! $! Check To See If The File We Want To Compile Actually Exists. $! $ IF (F$SEARCH(SOURCE_FILE).EQS."") $ THEN $! $! Tell The User That The File Dosen't Exist. $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist." $ WRITE SYS$OUTPUT "" $! $! Exit The Build. $! $ GOTO EXIT $! $! End The File Exist Check. $! $ ENDIF $! $! Tell The User What We Are Building. $! $ IF (PHASE.EQS."LIB") $ THEN $ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File." $ ELSE $ WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program." $ ENDIF $! $! Compile The File. $! $ ON ERROR THEN GOTO NEXT_LIB $ IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2 $ THEN $ CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE' $ ELSE $ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE' $ ENDIF $ WRITE OBJECTS OBJECT_FILE $! $ GOTO NEXT_LIB $ ENDIF $! $! Check if this program works well without a TCPIP library $! $ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - CURRENT_APP .NES. TCPIP_PROGRAMS $ THEN $ WRITE SYS$OUTPUT CURRENT_APP," needs a TCP/IP library. Can't link. Skipping..." $ GOTO NEXT_APP $ ENDIF $! $! Link The Program. $! Check To See If We Are To Link With A Specific TCP/IP Library. $! $ ON WARNING THEN GOTO NEXT_APP $! $ IF (TCPIP_LIB.NES."") $ THEN $! $! Don't Link With The RSAREF Routines And TCP/IP Library. $! $ LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' - 'EXE_DIR''CURRENT_APP'.OPT/OPTION, - 'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, - 'TCPIP_LIB','OPT_FILE'/OPTION $! $! Else... $! $ ELSE $! $! Don't Link With The RSAREF Routines And Link With A TCP/IP Library. $! $ LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' - 'EXE_DIR''CURRENT_APP'.OPT/OPTION, - 'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, - 'OPT_FILE'/OPTION $! $! End The TCP/IP Library Check. $! $ ENDIF $! $! Go Back And Do It Again. $! $ GOTO NEXT_APP $! $! All Done With This File. $! $ APP_DONE: $ EXIT: $! $! All Done, Time To Clean Up And Exit. $! $ GOSUB CLEANUP $ EXIT $! $! Check For The Link Option FIle. $! $ CHECK_OPT_FILE: $! $! Check To See If We Need To Make A VAX C Option File. $! $ IF (COMPILER.EQS."VAXC") $ THEN $! $! Check To See If We Already Have A VAX C Linker Option File. $! $ IF (F$SEARCH(OPT_FILE).EQS."") $ THEN $! $! We Need A VAX C Linker Option File. $! $ CREATE 'OPT_FILE' $DECK ! ! Default System Options File To Link Agianst ! The Sharable VAX C Runtime Library. ! SYS$SHARE:VAXCRTL.EXE/SHARE $EOD $! $! End The Option File Check. $! $ ENDIF $! $! End The VAXC Check. $! $ ENDIF $! $! Check To See If We Need A GNU C Option File. $! $ IF (COMPILER.EQS."GNUC") $ THEN $! $! Check To See If We Already Have A GNU C Linker Option File. $! $ IF (F$SEARCH(OPT_FILE).EQS."") $ THEN $! $! We Need A GNU C Linker Option File. $! $ CREATE 'OPT_FILE' $DECK ! ! Default System Options File To Link Agianst ! The Sharable C Runtime Library. ! GNU_CC:[000000]GCCLIB/LIBRARY SYS$SHARE:VAXCRTL/SHARE $EOD $! $! End The Option File Check. $! $ ENDIF $! $! End The GNU C Check. $! $ ENDIF $! $! Check To See If We Need A DEC C Option File. $! $ IF (COMPILER.EQS."DECC") $ THEN $! $! Check To See If We Already Have A DEC C Linker Option File. $! $ IF (F$SEARCH(OPT_FILE).EQS."") $ THEN $! $! Figure Out If We Need An AXP Or A VAX Linker Option File. $! $ IF ARCH.EQS."VAX" $ THEN $! $! We Need A DEC C Linker Option File For VAX. $! $ CREATE 'OPT_FILE' $DECK ! ! Default System Options File To Link Agianst ! The Sharable DEC C Runtime Library. ! SYS$SHARE:DECC$SHR.EXE/SHARE $EOD $! $! Else... $! $ ELSE $! $! Create The non-VAX Linker Option File. $! $ CREATE 'OPT_FILE' $DECK ! ! Default System Options File For non-VAX To Link Agianst ! The Sharable C Runtime Library. ! SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE SYS$SHARE:CMA$OPEN_RTL/SHARE $EOD $! $! End The DEC C Option File Check. $! $ ENDIF $! $! End The Option File Search. $! $ ENDIF $! $! End The DEC C Check. $! $ ENDIF $! $! Tell The User What Linker Option File We Are Using. $! $ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"." $! $! Time To RETURN. $! $ RETURN $! $! Check To See If We Have The Appropiate Libraries. $! $ LIB_CHECK: $! $! Look For The Library LIBCRYPTO.OLB. $! $ IF (F$SEARCH(CRYPTO_LIB).EQS."") $ THEN $! $! Tell The User We Can't Find The LIBCRYPTO.OLB Library. $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "Can't Find The Library ",CRYPTO_LIB,"." $ WRITE SYS$OUTPUT "We Can't Link Without It." $ WRITE SYS$OUTPUT "" $! $! Since We Can't Link Without It, Exit. $! $ EXIT $! $! End The Crypto Library Check. $! $ ENDIF $! $! Look For The Library LIBSSL.OLB. $! $ IF (F$SEARCH(SSL_LIB).EQS."") $ THEN $! $! Tell The User We Can't Find The LIBSSL.OLB Library. $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "Can't Find The Library ",SSL_LIB,"." $ WRITE SYS$OUTPUT "Some Of The Test Programs Need To Link To It." $ WRITE SYS$OUTPUT "" $! $! Since We Can't Link Without It, Exit. $! $ EXIT $! $! End The SSL Library Check. $! $ ENDIF $! $! Time To Return. $! $ RETURN $! $! Check The User's Options. $! $ CHECK_OPTIONS: $! $! Check To See If P1 Is Blank. $! $ IF (P1.EQS."NODEBUG") $ THEN $! $! P1 Is NODEBUG, So Compile Without Debugger Information. $! $ DEBUGGER = "NODEBUG" $ TRACEBACK = "NOTRACEBACK" $ GCC_OPTIMIZE = "OPTIMIZE" $ CC_OPTIMIZE = "OPTIMIZE" $ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile." $ WRITE SYS$OUTPUT "Compiling With Compiler Optimization." $! $! Else... $! $ ELSE $! $! Check To See If We Are To Compile With Debugger Information. $! $ IF (P1.EQS."DEBUG") $ THEN $! $! Compile With Debugger Information. $! $ DEBUGGER = "DEBUG" $ TRACEBACK = "TRACEBACK" $ GCC_OPTIMIZE = "NOOPTIMIZE" $ CC_OPTIMIZE = "NOOPTIMIZE" $ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile." $ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization." $ ELSE $! $! Tell The User Entered An Invalid Option.. $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:" $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information." $ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information." $ WRITE SYS$OUTPUT "" $! $! Time To EXIT. $! $ EXIT $! $! End The Valid Argument Check. $! $ ENDIF $! $! End The P1 Check. $! $ ENDIF $! $! Check To See If P2 Is Blank. $! $ IF (P2.EQS."") $ THEN $! $! O.K., The User Didn't Specify A Compiler, Let's Try To $! Find Out Which One To Use. $! $! Check To See If We Have GNU C. $! $ IF (F$TRNLNM("GNU_CC").NES."") $ THEN $! $! Looks Like GNUC, Set To Use GNUC. $! $ P2 = "GNUC" $! $! Else... $! $ ELSE $! $! Check To See If We Have VAXC Or DECC. $! $ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."") $ THEN $! $! Looks Like DECC, Set To Use DECC. $! $ P2 = "DECC" $! $! Else... $! $ ELSE $! $! Looks Like VAXC, Set To Use VAXC. $! $ P2 = "VAXC" $! $! End The VAXC Compiler Check. $! $ ENDIF $! $! End The DECC & VAXC Compiler Check. $! $ ENDIF $! $! End The Compiler Check. $! $ ENDIF $! $! Check To See If We Have A Option For P3. $! $ IF (P3.EQS."") $ THEN $! $! Find out what socket library we have available $! $ IF F$PARSE("SOCKETSHR:") .NES. "" $ THEN $! $! We have SOCKETSHR, and it is my opinion that it's the best to use. $! $ P3 = "SOCKETSHR" $! $! Tell the user $! $ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP" $! $! Else, let's look for something else $! $ ELSE $! $! Like UCX (the reason to do this before Multinet is that the UCX $! emulation is easier to use...) $! $ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" - .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" - .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. "" $ THEN $! $! Last resort: a UCX or UCX-compatible library $! $ P3 = "UCX" $! $! Tell the user $! $ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP" $! $! That was all... $! $ ENDIF $ ENDIF $ ENDIF $! $! Set Up Initial CC Definitions, Possibly With User Ones $! $ CCDEFS = "MONOLITH" $ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS $ CCEXTRAFLAGS = "" $ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS $ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR" $ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN - CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS $! $! Check To See If The User Entered A Valid Paramter. $! $ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC") $ THEN $! $! Check To See If The User Wanted DECC. $! $ IF (P2.EQS."DECC") $ THEN $! $! Looks Like DECC, Set To Use DECC. $! $ COMPILER = "DECC" $! $! Tell The User We Are Using DECC. $! $ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." $! $! Use DECC... $! $ CC = "CC" $ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" - THEN CC = "CC/DECC" $ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + - "/NOLIST/PREFIX=ALL" + - "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS $! $! Define The Linker Options File Name. $! $ OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT" $! $! End DECC Check. $! $ ENDIF $! $! Check To See If We Are To Use VAXC. $! $ IF (P2.EQS."VAXC") $ THEN $! $! Looks Like VAXC, Set To Use VAXC. $! $ COMPILER = "VAXC" $! $! Tell The User We Are Using VAX C. $ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." $! $! Compile Using VAXC. $! $ CC = "CC" $ IF ARCH.NES."VAX" $ THEN $ WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!" $ EXIT $ ENDIF $ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC" $ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS $ CCDEFS = CCDEFS + ",""VAXC""" $! $! Define <sys> As SYS$COMMON:[SYSLIB] $! $ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB] $! $! Define The Linker Options File Name. $! $ OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT" $! $! End VAXC Check $! $ ENDIF $! $! Check To See If We Are To Use GNU C. $! $ IF (P2.EQS."GNUC") $ THEN $! $! Looks Like GNUC, Set To Use GNUC. $! $ COMPILER = "GNUC" $! $! Tell The User We Are Using GNUC. $! $ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." $! $! Use GNU C... $! $ IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC $ CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS $! $! Define The Linker Options File Name. $! $ OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT" $! $! End The GNU C Check. $! $ ENDIF $! $! Set up default defines $! $ CCDEFS = """FLAT_INC=1""," + CCDEFS $! $! Else The User Entered An Invalid Argument. $! $ ELSE $! $! Tell The User We Don't Know What They Want. $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:" $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C." $ WRITE SYS$OUTPUT " DECC : To Compile With DEC C." $ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C." $ WRITE SYS$OUTPUT "" $! $! Time To EXIT. $! $ EXIT $ ENDIF $! $! Time to check the contents, and to make sure we get the correct library. $! $ IF P3.EQS."SOCKETSHR" .OR. P3.EQS."MULTINET" .OR. P3.EQS."UCX" - .OR. P3.EQS."TCPIP" .OR. P3.EQS."NONE" $ THEN $! $! Check to see if SOCKETSHR was chosen $! $ IF P3.EQS."SOCKETSHR" $ THEN $! $! Set the library to use SOCKETSHR $! $ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT" $! $! Done with SOCKETSHR $! $ ENDIF $! $! Check to see if MULTINET was chosen $! $ IF P3.EQS."MULTINET" $ THEN $! $! Set the library to use UCX emulation. $! $ P3 = "UCX" $! $! Done with MULTINET $! $ ENDIF $! $! Check to see if UCX was chosen $! $ IF P3.EQS."UCX" $ THEN $! $! Set the library to use UCX. $! $ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT" $ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" $ THEN $ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT" $ ELSE $ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN - TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT" $ ENDIF $! $! Done with UCX $! $ ENDIF $! $! Check to see if TCPIP (post UCX) was chosen $! $ IF P3.EQS."TCPIP" $ THEN $! $! Set the library to use TCPIP. $! $ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT" $! $! Done with TCPIP $! $ ENDIF $! $! Check to see if NONE was chosen $! $ IF P3.EQS."NONE" $ THEN $! $! Do not use TCPIP. $! $ TCPIP_LIB = "" $! $! Done with TCPIP $! $ ENDIF $! $! Add TCP/IP type to CC definitions. $! $ CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'" $! $! Print info $! $ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB $! $! Else The User Entered An Invalid Argument. $! $ ELSE $! $! Tell The User We Don't Know What They Want. $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:" $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library." $ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library." $ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library." $ WRITE SYS$OUTPUT "" $! $! Time To EXIT. $! $ EXIT $! $! Done with TCP/IP libraries $! $ ENDIF $! $! Finish up the definition of CC. $! $ IF COMPILER .EQS. "DECC" $ THEN $ IF CCDISABLEWARNINGS .NES. "" $ THEN $ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))" $ ENDIF $ ELSE $ CCDISABLEWARNINGS = "" $ ENDIF $ CC2 = CC + "/DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS $ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS $! $! Show user the result $! $ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC $! $! Special Threads For OpenVMS v7.1 Or Later $! $! Written By: Richard Levitte $! richard@levitte.org $! $! $! Check To See If We Have A Option For P4. $! $ IF (P4.EQS."") $ THEN $! $! Get The Version Of VMS We Are Using. $! $ ISSEVEN := $ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION"))) $ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP)) $! $! Check To See If The VMS Version Is v7.1 Or Later. $! $ IF (TMP.GE.71) $ THEN $! $! We Have OpenVMS v7.1 Or Later, So Use The Special Threads. $! $ ISSEVEN := ,PTHREAD_USE_D4 $! $! End The VMS Version Check. $! $ ENDIF $! $! End The P4 Check. $! $ ENDIF $! $! Check if the user wanted to compile just a subset of all the programs. $! $ IF P5 .NES. "" $ THEN $ PROGRAMS = P5 $ ENDIF $! $! Time To RETURN... $! $ RETURN $! $ INITIALISE: $! $! Save old value of the logical name OPENSSL $! $ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE") $! $! Save directory information $! $ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;" $ __HERE = F$EDIT(__HERE,"UPCASE") $ __TOP = __HERE - "APPS]" $ __INCLUDE = __TOP + "INCLUDE.OPENSSL]" $! $! Set up the logical name OPENSSL to point at the include directory $! $ DEFINE OPENSSL/NOLOG '__INCLUDE' $! $! Done $! $ RETURN $! $ CLEANUP: $! $! Restore the logical name OPENSSL if it had a value $! $ IF __SAVE_OPENSSL .EQS. "" $ THEN $ DEASSIGN OPENSSL $ ELSE $ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL' $ ENDIF $! $! Done $! $ RETURN