/*
* Copyright (C) 1995,2004 Hewlett-Packard Company
*/
/* This file contains the test-specific definitions for netperf's BSD */
/* sockets tests */
struct xti_tcp_stream_request_struct {
int send_buf_size;
int recv_buf_size; /* how big does the client want it - the */
/* receive socket buffer that is */
int receive_size; /* how many bytes do we want to receive at one */
/* time? */
int recv_alignment; /* what is the alignment of the receive */
/* buffer? */
int recv_offset; /* and at what offset from that alignment? */
int no_delay; /* do we disable the nagle algorithm for send */
/* coalescing? */
int measure_cpu; /* does the client want server cpu utilization */
/* measured? */
float cpu_rate; /* do we know how fast the cpu is already? */
int test_length; /* how long is the test? */
int so_rcvavoid; /* do we want the remote to avoid copies on */
/* receives? */
int so_sndavoid; /* do we want the remote to avoid send copies? */
int dirty_count; /* how many integers in the receive buffer */
/* should be made dirty before calling recv? */
int clean_count; /* how many integers should be read from the */
/* recv buffer before calling recv? */
int dev_name_len; /* the length of the device name string. this */
/* is used to put it into the proper order on */
/* @#$% byte-swapped boxes... */
char xti_device[32]; /* the path to the dlpi device */
};
struct xti_tcp_stream_response_struct {
int recv_buf_size; /* how big does the client want it */
int receive_size;
int no_delay;
int measure_cpu; /* does the client want server cpu */
int test_length; /* how long is the test? */
int send_buf_size;
int data_port_number; /* connect to me here */
float cpu_rate; /* could we measure */
int so_rcvavoid; /* could the remote avoid receive copies? */
int so_sndavoid; /* could the remote avoid send copies? */
};
struct xti_tcp_stream_results_struct {
double bytes_received;
unsigned int recv_calls;
float elapsed_time; /* how long the test ran */
float cpu_util; /* -1 if not measured */
float serv_dem; /* -1 if not measured */
int cpu_method; /* how was cpu util measured? */
int num_cpus; /* how many CPUs were there */
};
struct xti_tcp_rr_request_struct {
int recv_buf_size; /* how big does the client want it */
int send_buf_size;
int recv_alignment;
int recv_offset;
int send_alignment;
int send_offset;
int request_size;
int response_size;
int no_delay;
int measure_cpu; /* does the client want server cpu */
float cpu_rate; /* do we know how fast the cpu is? */
int test_length; /* how long is the test? */
int so_rcvavoid; /* do we want the remote to avoid receive */
/* copies? */
int so_sndavoid; /* do we want the remote to avoid send copies? */
int dev_name_len; /* the length of the device name string. this */
/* is used to put it into the proper order on */
/* @#$% byte-swapped boxes... */
char xti_device[32]; /* the path to the dlpi device */
};
struct xti_tcp_rr_response_struct {
int recv_buf_size; /* how big does the client want it */
int no_delay;
int measure_cpu; /* does the client want server cpu */
int test_length; /* how long is the test? */
int send_buf_size;
int data_port_number; /* connect to me here */
float cpu_rate; /* could we measure */
int so_rcvavoid; /* could the remote avoid receive copies? */
int so_sndavoid; /* could the remote avoid send copies? */
};
struct xti_tcp_rr_results_struct {
unsigned int bytes_received; /* ignored initially */
unsigned int recv_calls; /* ignored initially */
unsigned int trans_received; /* not ignored */
float elapsed_time; /* how long the test ran */
float cpu_util; /* -1 if not measured */
float serv_dem; /* -1 if not measured */
int cpu_method; /* how was cpu util measured? */
int num_cpus; /* how many CPUs were there */
};
struct xti_tcp_conn_rr_request_struct {
int recv_buf_size; /* how big does the client want it */
int send_buf_size;
int recv_alignment;
int recv_offset;
int send_alignment;
int send_offset;
int request_size;
int response_size;
int no_delay;
int measure_cpu; /* does the client want server cpu */
float cpu_rate; /* do we know how fast the cpu is? */
int test_length; /* how long is the test? */
int so_rcvavoid; /* do we want the remote to avoid receive */
/* copies? */
int so_sndavoid; /* do we want the remote to avoid send copies? */
int dev_name_len; /* the length of the device name string. this */
/* is used to put it into the proper order on */
/* @#$% byte-swapped boxes... */
char xti_device[32]; /* the path to the dlpi device */
};
struct xti_tcp_conn_rr_response_struct {
int recv_buf_size; /* how big does the client want it */
int no_delay;
int measure_cpu; /* does the client want server cpu */
int test_length; /* how long is the test? */
int send_buf_size;
int data_port_number; /* connect to me here */
float cpu_rate; /* could we measure */
int so_rcvavoid; /* could the remote avoid receive copies? */
int so_sndavoid; /* could the remote avoid send copies? */
};
struct xti_tcp_conn_rr_results_struct {
unsigned int bytes_received; /* ignored initially */
unsigned int recv_calls; /* ignored initially */
unsigned int trans_received; /* not ignored */
float elapsed_time; /* how long the test ran */
float cpu_util; /* -1 if not measured */
float serv_dem; /* -1 if not measured */
int cpu_method; /* how was cpu util measured? */
int num_cpus; /* how many CPUs were there */
};
struct xti_udp_stream_request_struct {
int recv_buf_size;
int message_size;
int recv_alignment;
int recv_offset;
int checksum_off; /* not used. left in for compatibility */
int measure_cpu;
float cpu_rate;
int test_length;
int so_rcvavoid; /* do we want the remote to avoid receive */
/* copies? */
int so_sndavoid; /* do we want the remote to avoid send copies? */
int dev_name_len; /* the length of the device name string. this */
/* is used to put it into the proper order on */
/* @#$% byte-swapped boxes... */
char xti_device[32]; /* the path to the dlpi device */
};
struct xti_udp_stream_response_struct {
int recv_buf_size;
int send_buf_size;
int measure_cpu;
int test_length;
int data_port_number;
float cpu_rate;
int so_rcvavoid; /* could the remote avoid receive copies? */
int so_sndavoid; /* could the remote avoid send copies? */
};
struct xti_udp_stream_results_struct {
unsigned int messages_recvd;
unsigned int bytes_received;
float elapsed_time;
float cpu_util;
int cpu_method; /* how was cpu util measured? */
int num_cpus; /* how many CPUs were there */
};
struct xti_udp_rr_request_struct {
int recv_buf_size; /* how big does the client want it */
int send_buf_size;
int recv_alignment;
int recv_offset;
int send_alignment;
int send_offset;
int request_size;
int response_size;
int no_delay;
int measure_cpu; /* does the client want server cpu */
float cpu_rate; /* do we know how fast the cpu is? */
int test_length; /* how long is the test? */
int so_rcvavoid; /* do we want the remote to avoid receive */
/* copies? */
int so_sndavoid; /* do we want the remote to avoid send copies? */
int dev_name_len; /* the length of the device name string. this */
/* is used to put it into the proper order on */
/* @#$% byte-swapped boxes... */
char xti_device[32]; /* the path to the dlpi device */
};
struct xti_udp_rr_response_struct {
int recv_buf_size; /* how big does the client want it */
int no_delay;
int measure_cpu; /* does the client want server cpu */
int test_length; /* how long is the test? */
int send_buf_size;
int data_port_number; /* connect to me here */
float cpu_rate; /* could we measure */
int so_rcvavoid; /* could the remote avoid receive copies? */
int so_sndavoid; /* could the remote avoid send copies? */
};
struct xti_udp_rr_results_struct {
unsigned int bytes_received; /* ignored initially */
unsigned int recv_calls; /* ignored initially */
unsigned int trans_received; /* not ignored */
float elapsed_time; /* how long the test ran */
float cpu_util; /* -1 if not measured */
float serv_dem; /* -1 if not measured */
int cpu_method; /* how was cpu util measured? */
int num_cpus; /* how many CPUs were there */
};
extern void send_xti_tcp_stream(char remote_host[]);
extern void recv_xti_tcp_stream();
extern void send_xti_tcp_rr(char remote_host[]);
extern void send_xti_udp_stream(char remote_host[]);
extern void recv_xti_udp_stream();
extern void send_xti_udp_rr(char remote_host[]);
extern void recv_xti_udp_rr();
extern void recv_xti_tcp_rr();
extern void send_xti_tcp_conn_rr(char remote_host[]);
extern void recv_xti_tcp_conn_rr();
extern void scan_xti_args(int argc, char *argv[]);