/******************************************************************************
*
* Copyright (C) 2003-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This is the implementation file for the file system call-in functions.
*
******************************************************************************/
#include <string.h>
#include "bta_api.h"
#include "bta_sys.h"
#include "bta_fs_ci.h"
#include "gki.h"
#include "bd.h"
/*******************************************************************************
**
** Function bta_fs_ci_write
**
** Description This function sends an event to IO indicating the phone
** has written the number of bytes specified in the call-out
** function, bta_fs_co_write(), and is ready for more data.
** This function is used to control the TX data flow.
** Note: The data buffer is released by the stack after
** calling this function.
**
** Parameters fd - file descriptor passed to the stack in the
** bta_fs_ci_open call-in function.
** status - BTA_FS_CO_OK or BTA_FS_CO_FAIL
**
** Returns void
**
*******************************************************************************/
void bta_fs_ci_write(int fd, tBTA_FS_CO_STATUS status, UINT16 evt)
{
tBTA_FS_CI_WRITE_EVT *p_evt;
if ((p_evt = (tBTA_FS_CI_WRITE_EVT *) GKI_getbuf(sizeof(tBTA_FS_CI_WRITE_EVT))) != NULL)
{
p_evt->hdr.event = evt;
p_evt->fd = fd;
p_evt->status = status;
bta_sys_sendmsg(p_evt);
}
}
/*******************************************************************************
**
** Function bta_fs_ci_read
**
** Description This function sends an event to BTA indicating the phone has
** read in the requested amount of data specified in the
** bta_fs_co_read() call-out function. It should only be called
** when the requested number of bytes has been read in, or after
** the end of the file has been detected.
**
** Parameters fd - file descriptor passed to the stack in the
** bta_fs_ci_open call-in function.
** num_bytes_read - number of bytes read into the buffer
** specified in the read callout-function.
** status - BTA_FS_CO_OK if full buffer of data,
** BTA_FS_CO_EOF if the end of file has been reached,
** BTA_FS_CO_FAIL if an error has occurred.
**
** Returns void
**
*******************************************************************************/
void bta_fs_ci_read(int fd, UINT16 num_bytes_read, tBTA_FS_CO_STATUS status, UINT16 evt)
{
tBTA_FS_CI_READ_EVT *p_evt;
if ((p_evt = (tBTA_FS_CI_READ_EVT *) GKI_getbuf(sizeof(tBTA_FS_CI_READ_EVT))) != NULL)
{
p_evt->hdr.event = evt;
p_evt->fd = fd;
p_evt->status = status;
p_evt->num_read = num_bytes_read;
bta_sys_sendmsg(p_evt);
}
}
/*******************************************************************************
**
** Function bta_fs_ci_open
**
** Description This function sends an event to BTA indicating the phone has
** finished opening a file for reading or writing.
**
** Parameters fd - file descriptor passed to the stack in the
** bta_fs_ci_open call-in function.
** status - BTA_FS_CO_OK if file was opened in mode specified
** in the call-out function.
** BTA_FS_CO_EACCES if the file exists, but contains
** the wrong access permissions.
** BTA_FS_CO_FAIL if any other error has occurred.
** file_size - The total size of the file
** evt - Used Internally by BTA -> MUST be same value passed
** in call-out function.
**
** Returns void
**
*******************************************************************************/
void bta_fs_ci_open(int fd, tBTA_FS_CO_STATUS status, UINT32 file_size, UINT16 evt)
{
tBTA_FS_CI_OPEN_EVT *p_evt;
if ((p_evt = (tBTA_FS_CI_OPEN_EVT *) GKI_getbuf(sizeof(tBTA_FS_CI_OPEN_EVT))) != NULL)
{
p_evt->hdr.event = evt;
p_evt->fd = fd;
p_evt->status = status;
p_evt->file_size = file_size;
p_evt->p_file = NULL;
bta_sys_sendmsg(p_evt);
}
}
/*******************************************************************************
**
** Function bta_fs_ci_direntry
**
** Description This function is called in response to the
** bta_fs_co_getdirentry call-out function.
**
** Parameters status - BTA_FS_CO_OK if p_entry points to a valid entry.
** BTA_FS_CO_EODIR if no more entries (p_entry is ignored).
** BTA_FS_CO_FAIL if any errors have occurred.
**
** Returns void
**
*******************************************************************************/
void bta_fs_ci_direntry(tBTA_FS_CO_STATUS status, UINT16 evt)
{
tBTA_FS_CI_GETDIR_EVT *p_evt;
if ((p_evt = (tBTA_FS_CI_GETDIR_EVT *)GKI_getbuf(sizeof(tBTA_FS_CI_GETDIR_EVT))) != NULL)
{
p_evt->hdr.event = evt;
p_evt->status = status;
bta_sys_sendmsg(p_evt);
}
}
/*******************************************************************************
**
** Function bta_fs_ci_resume
**
** Description This function is called in response to the
** bta_fs_co_resume call-out function.
**
** Parameters p_sess_info - the stored session ID and related information.
** timeout - the timeout for this suspended session.
** ssn - the stored session sequence number.
** info - the stored BTA specific information (like last active operation).
** status - BTA_FS_CO_OK if p_entry points to a valid entry.
** BTA_FS_CO_FAIL if any errors have occurred.
** evt - Used Internally by BTA -> MUST be same value passed
** in call-out function.
**
** Returns void
**
*******************************************************************************/
void bta_fs_ci_resume (BD_ADDR_PTR p_addr, UINT8 *p_sess_info,
UINT32 timeout, UINT32 offset, UINT8 ssn, UINT8 info,
tBTA_FS_CO_STATUS status, UINT16 evt)
{
tBTA_FS_CI_RESUME_EVT *p_evt;
UINT16 size = sizeof(tBTA_FS_CI_RESUME_EVT) + sizeof(BD_ADDR);
if ((p_evt = (tBTA_FS_CI_RESUME_EVT *)GKI_getbuf(size)) != NULL)
{
p_evt->p_addr = NULL;
if (p_addr != NULL)
{
p_evt->p_addr = (BD_ADDR_PTR)(p_evt + 1);
bdcpy(p_evt->p_addr, p_addr);
}
p_evt->hdr.event = evt;
p_evt->p_sess_info = p_sess_info;
p_evt->timeout = timeout;
p_evt->offset = offset;
p_evt->ssn = ssn;
p_evt->info = info;
p_evt->status = status;
bta_sys_sendmsg(p_evt);
}
}
/*******************************************************************************
**
** Function bta_fs_ci_action
**
** Description This function is called in response to one of the action
** call-out functions: bta_fs_co_copy, bta_fs_co_rename or
** bta_fs_co_set_perms.
**
** Parameters status - BTA_FS_CO_OK if the action is succession.
** BTA_FS_CO_FAIL if any errors have occurred.
** evt - Used Internally by BTA -> MUST be same value passed
** in call-out function.
**
** Returns void
**
*******************************************************************************/
void bta_fs_ci_action(tBTA_FS_CO_STATUS status, UINT16 evt)
{
tBTA_FS_CI_ACTION_EVT *p_evt;
if ((p_evt = (tBTA_FS_CI_ACTION_EVT *) GKI_getbuf(sizeof(tBTA_FS_CI_ACTION_EVT))) != NULL)
{
p_evt->hdr.event = evt;
p_evt->status = status;
bta_sys_sendmsg(p_evt);
}
}
/*******************************************************************************
**
** Function bta_fs_ci_resume_op
**
** Description This function sends an event to BTA indicating the phone has
** finished opening a file for reading or writing on resume.
**
** Parameters fd - file descriptor passed to the stack in the
** bta_fs_ci_open call-in function.
** status - BTA_FS_CO_OK if file was opened in mode specified
** in the call-out function.
** BTA_FS_CO_EACCES if the file exists, but contains
** the wrong access permissions.
** BTA_FS_CO_FAIL if any other error has occurred.
** p_file - The file name associated with fd
** file_size - The total size of the file
** evt - Used Internally by BTA -> MUST be same value passed
** in call-out function.
**
** Returns void
**
*******************************************************************************/
void bta_fs_ci_resume_op(int fd, tBTA_FS_CO_STATUS status, const char *p_file,
UINT32 file_size, UINT16 evt)
{
tBTA_FS_CI_OPEN_EVT *p_evt;
UINT16 file_len = strlen(p_file) + 1;
UINT16 size = sizeof(tBTA_FS_CI_OPEN_EVT) + file_len;
char *p;
if ((p_evt = (tBTA_FS_CI_OPEN_EVT *) GKI_getbuf(size)) != NULL)
{
p_evt->hdr.event = evt;
p_evt->fd = fd;
p_evt->status = status;
p_evt->file_size = file_size;
p = (char *)(p_evt + 1);
BCM_STRNCPY_S (p, file_len, p_file, file_len-1);
p[file_len] = '\0';
p_evt->p_file = (const char *)p;
bta_sys_sendmsg(p_evt);
}
}