/*
* Copyright (C) 2011 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
///////////////////////////////////////////////////
// Blend.cpp
// $Id: Blend.cpp,v 1.22 2011/06/24 04:22:14 mbansal Exp $
#include <string.h>
#include "Interp.h"
#include "Blend.h"
#include "Geometry.h"
#include "trsMatrix.h"
#include "Log.h"
#define LOG_TAG "BLEND"
Blend::Blend()
{
m_wb.blendingType = BLEND_TYPE_NONE;
}
Blend::~Blend()
{
if (m_pFrameVPyr) free(m_pFrameVPyr);
if (m_pFrameUPyr) free(m_pFrameUPyr);
if (m_pFrameYPyr) free(m_pFrameYPyr);
}
int Blend::initialize(int blendingType, int stripType, int frame_width, int frame_height)
{
this->width = frame_width;
this->height = frame_height;
this->m_wb.blendingType = blendingType;
this->m_wb.stripType = stripType;
m_wb.blendRange = m_wb.blendRangeUV = BLEND_RANGE_DEFAULT;
m_wb.nlevs = m_wb.blendRange;
m_wb.nlevsC = m_wb.blendRangeUV;
if (m_wb.nlevs <= 0) m_wb.nlevs = 1; // Need levels for YUV processing
if (m_wb.nlevsC > m_wb.nlevs) m_wb.nlevsC = m_wb.nlevs;
m_wb.roundoffOverlap = 1.5;
m_pFrameYPyr = NULL;
m_pFrameUPyr = NULL;
m_pFrameVPyr = NULL;
m_pFrameYPyr = PyramidShort::allocatePyramidPacked(m_wb.nlevs, (unsigned short) width, (unsigned short) height, BORDER);
m_pFrameUPyr = PyramidShort::allocatePyramidPacked(m_wb.nlevsC, (unsigned short) (width), (unsigned short) (height), BORDER);
m_pFrameVPyr = PyramidShort::allocatePyramidPacked(m_wb.nlevsC, (unsigned short) (width), (unsigned short) (height), BORDER);
if (!m_pFrameYPyr || !m_pFrameUPyr || !m_pFrameVPyr)
{
LOGE("Error: Could not allocate pyramids for blending");
return BLEND_RET_ERROR_MEMORY;
}
return BLEND_RET_OK;
}
inline double max(double a, double b) { return a > b ? a : b; }
inline double min(double a, double b) { return a < b ? a : b; }
void Blend::AlignToMiddleFrame(MosaicFrame **frames, int frames_size)
{
// Unwarp this frame and Warp the others to match
MosaicFrame *mb = NULL;
MosaicFrame *ref = frames[int(frames_size/2)]; // Middle frame
double invtrs[3][3];
inv33d(ref->trs, invtrs);
for(int mfit = 0; mfit < frames_size; mfit++)
{
mb = frames[mfit];
double temp[3][3];
mult33d(temp, invtrs, mb->trs);
memcpy(mb->trs, temp, sizeof(temp));
normProjMat33d(mb->trs);
}
}
int Blend::runBlend(MosaicFrame **oframes, MosaicFrame **rframes,
int frames_size,
ImageType &imageMosaicYVU, int &mosaicWidth, int &mosaicHeight,
float &progress, bool &cancelComputation)
{
int ret;
int numCenters;
MosaicFrame **frames;
// For THIN strip mode, accept all frames for blending
if (m_wb.stripType == STRIP_TYPE_THIN)
{
frames = oframes;
}
else // For WIDE strip mode, first select the relevant frames to blend.
{
SelectRelevantFrames(oframes, frames_size, rframes, frames_size);
frames = rframes;
}
ComputeBlendParameters(frames, frames_size, true);
numCenters = frames_size;
if (numCenters == 0)
{
LOGE("Error: No frames to blend");
return BLEND_RET_ERROR;
}
if (!(m_AllSites = m_Triangulator.allocMemory(numCenters)))
{
return BLEND_RET_ERROR_MEMORY;
}
// Bounding rectangle (real numbers) of the final mosaic computed by projecting
// each input frame into the mosaic coordinate system.
BlendRect global_rect;
global_rect.lft = global_rect.bot = 2e30; // min values
global_rect.rgt = global_rect.top = -2e30; // max values
MosaicFrame *mb = NULL;
double halfwidth = width / 2.0;
double halfheight = height / 2.0;
double z, x0, y0, x1, y1, x2, y2, x3, y3;
// Corners of the left-most and right-most frames respectively in the
// mosaic coordinate system.
double xLeftCorners[2] = {2e30, 2e30};
double xRightCorners[2] = {-2e30, -2e30};
// Corners of the top-most and bottom-most frames respectively in the
// mosaic coordinate system.
double yTopCorners[2] = {2e30, 2e30};
double yBottomCorners[2] = {-2e30, -2e30};
// Determine the extents of the final mosaic
CSite *csite = m_AllSites ;
for(int mfit = 0; mfit < frames_size; mfit++)
{
mb = frames[mfit];
// Compute clipping for this frame's rect
FrameToMosaicRect(mb->width, mb->height, mb->trs, mb->brect);
// Clip global rect using this frame's rect
ClipRect(mb->brect, global_rect);
// Calculate the corner points
FrameToMosaic(mb->trs, 0.0, 0.0, x0, y0);
FrameToMosaic(mb->trs, 0.0, mb->height-1.0, x1, y1);
FrameToMosaic(mb->trs, mb->width-1.0, mb->height-1.0, x2, y2);
FrameToMosaic(mb->trs, mb->width-1.0, 0.0, x3, y3);
if(x0 < xLeftCorners[0] || x1 < xLeftCorners[1]) // If either of the left corners is lower
{
xLeftCorners[0] = x0;
xLeftCorners[1] = x1;
}
if(x3 > xRightCorners[0] || x2 > xRightCorners[1]) // If either of the right corners is higher
{
xRightCorners[0] = x3;
xRightCorners[1] = x2;
}
if(y0 < yTopCorners[0] || y3 < yTopCorners[1]) // If either of the top corners is lower
{
yTopCorners[0] = y0;
yTopCorners[1] = y3;
}
if(y1 > yBottomCorners[0] || y2 > yBottomCorners[1]) // If either of the bottom corners is higher
{
yBottomCorners[0] = y1;
yBottomCorners[1] = y2;
}
// Compute the centroid of the warped region
FindQuadCentroid(x0, y0, x1, y1, x2, y2, x3, y3, csite->getVCenter().x, csite->getVCenter().y);
csite->setMb(mb);
csite++;
}
// Get origin and sizes
// Bounding rectangle (int numbers) of the final mosaic computed by projecting
// each input frame into the mosaic coordinate system.
MosaicRect fullRect;
fullRect.left = (int) floor(global_rect.lft); // min-x
fullRect.top = (int) floor(global_rect.bot); // min-y
fullRect.right = (int) ceil(global_rect.rgt); // max-x
fullRect.bottom = (int) ceil(global_rect.top);// max-y
Mwidth = (unsigned short) (fullRect.right - fullRect.left + 1);
Mheight = (unsigned short) (fullRect.bottom - fullRect.top + 1);
int xLeftMost, xRightMost;
int yTopMost, yBottomMost;
// Rounding up, so that we don't include the gray border.
xLeftMost = max(0, max(xLeftCorners[0], xLeftCorners[1]) - fullRect.left + 1);
xRightMost = min(Mwidth - 1, min(xRightCorners[0], xRightCorners[1]) - fullRect.left - 1);
yTopMost = max(0, max(yTopCorners[0], yTopCorners[1]) - fullRect.top + 1);
yBottomMost = min(Mheight - 1, min(yBottomCorners[0], yBottomCorners[1]) - fullRect.top - 1);
if (xRightMost <= xLeftMost || yBottomMost <= yTopMost)
{
LOGE("RunBlend: aborting -consistency check failed,"
"(xLeftMost, xRightMost, yTopMost, yBottomMost): (%d, %d, %d, %d)",
xLeftMost, xRightMost, yTopMost, yBottomMost);
return BLEND_RET_ERROR;
}
// Make sure image width is multiple of 4
Mwidth = (unsigned short) ((Mwidth + 3) & ~3);
Mheight = (unsigned short) ((Mheight + 3) & ~3); // Round up.
ret = MosaicSizeCheck(LIMIT_SIZE_MULTIPLIER, LIMIT_HEIGHT_MULTIPLIER);
if (ret != BLEND_RET_OK)
{
LOGE("RunBlend: aborting - mosaic size check failed, "
"(frame_width, frame_height) vs (mosaic_width, mosaic_height): "
"(%d, %d) vs (%d, %d)", width, height, Mwidth, Mheight);
return ret;
}
LOGI("Allocate mosaic image for blending - size: %d x %d", Mwidth, Mheight);
YUVinfo *imgMos = YUVinfo::allocateImage(Mwidth, Mheight);
if (imgMos == NULL)
{
LOGE("RunBlend: aborting - couldn't alloc %d x %d mosaic image", Mwidth, Mheight);
return BLEND_RET_ERROR_MEMORY;
}
// Set the Y image to 255 so we can distinguish when frame idx are written to it
memset(imgMos->Y.ptr[0], 255, (imgMos->Y.width * imgMos->Y.height));
// Set the v and u images to black
memset(imgMos->V.ptr[0], 128, (imgMos->V.width * imgMos->V.height) << 1);
// Do the triangulation. It returns a sorted list of edges
SEdgeVector *edge;
int n = m_Triangulator.triangulate(&edge, numCenters, width, height);
m_Triangulator.linkNeighbors(edge, n, numCenters);
// Bounding rectangle that determines the positioning of the rectangle that is
// cropped out of the computed mosaic to get rid of the gray borders.
MosaicRect cropping_rect;
if (m_wb.horizontal)
{
cropping_rect.left = xLeftMost;
cropping_rect.right = xRightMost;
}
else
{
cropping_rect.top = yTopMost;
cropping_rect.bottom = yBottomMost;
}
// Do merging and blending :
ret = DoMergeAndBlend(frames, numCenters, width, height, *imgMos, fullRect,
cropping_rect, progress, cancelComputation);
if (m_wb.blendingType == BLEND_TYPE_HORZ)
CropFinalMosaic(*imgMos, cropping_rect);
m_Triangulator.freeMemory(); // note: can be called even if delaunay_alloc() wasn't successful
imageMosaicYVU = imgMos->Y.ptr[0];
if (m_wb.blendingType == BLEND_TYPE_HORZ)
{
mosaicWidth = cropping_rect.right - cropping_rect.left + 1;
mosaicHeight = cropping_rect.bottom - cropping_rect.top + 1;
}
else
{
mosaicWidth = Mwidth;
mosaicHeight = Mheight;
}
return ret;
}
int Blend::MosaicSizeCheck(float sizeMultiplier, float heightMultiplier) {
if (Mwidth < width || Mheight < height) {
return BLEND_RET_ERROR;
}
if ((Mwidth * Mheight) > (width * height * sizeMultiplier)) {
return BLEND_RET_ERROR;
}
// We won't do blending for the cases where users swing the device too much
// in the secondary direction. We use a short side to determine the
// secondary direction because users may hold the device in landsape
// or portrait.
int shortSide = min(Mwidth, Mheight);
if (shortSide > height * heightMultiplier) {
return BLEND_RET_ERROR;
}
return BLEND_RET_OK;
}
int Blend::FillFramePyramid(MosaicFrame *mb)
{
ImageType mbY, mbU, mbV;
// Lay this image, centered into the temporary buffer
mbY = mb->image;
mbU = mb->getU();
mbV = mb->getV();
int h, w;
for(h=0; h<height; h++)
{
ImageTypeShort yptr = m_pFrameYPyr->ptr[h];
ImageTypeShort uptr = m_pFrameUPyr->ptr[h];
ImageTypeShort vptr = m_pFrameVPyr->ptr[h];
for(w=0; w<width; w++)
{
yptr[w] = (short) ((*(mbY++)) << 3);
uptr[w] = (short) ((*(mbU++)) << 3);
vptr[w] = (short) ((*(mbV++)) << 3);
}
}
// Spread the image through the border
PyramidShort::BorderSpread(m_pFrameYPyr, BORDER, BORDER, BORDER, BORDER);
PyramidShort::BorderSpread(m_pFrameUPyr, BORDER, BORDER, BORDER, BORDER);
PyramidShort::BorderSpread(m_pFrameVPyr, BORDER, BORDER, BORDER, BORDER);
// Generate Laplacian pyramids
if (!PyramidShort::BorderReduce(m_pFrameYPyr, m_wb.nlevs) || !PyramidShort::BorderExpand(m_pFrameYPyr, m_wb.nlevs, -1) ||
!PyramidShort::BorderReduce(m_pFrameUPyr, m_wb.nlevsC) || !PyramidShort::BorderExpand(m_pFrameUPyr, m_wb.nlevsC, -1) ||
!PyramidShort::BorderReduce(m_pFrameVPyr, m_wb.nlevsC) || !PyramidShort::BorderExpand(m_pFrameVPyr, m_wb.nlevsC, -1))
{
LOGE("Error: Could not generate Laplacian pyramids");
return BLEND_RET_ERROR;
}
else
{
return BLEND_RET_OK;
}
}
int Blend::DoMergeAndBlend(MosaicFrame **frames, int nsite,
int width, int height, YUVinfo &imgMos, MosaicRect &rect,
MosaicRect &cropping_rect, float &progress, bool &cancelComputation)
{
m_pMosaicYPyr = NULL;
m_pMosaicUPyr = NULL;
m_pMosaicVPyr = NULL;
m_pMosaicYPyr = PyramidShort::allocatePyramidPacked(m_wb.nlevs,(unsigned short)rect.Width(),(unsigned short)rect.Height(),BORDER);
m_pMosaicUPyr = PyramidShort::allocatePyramidPacked(m_wb.nlevsC,(unsigned short)rect.Width(),(unsigned short)rect.Height(),BORDER);
m_pMosaicVPyr = PyramidShort::allocatePyramidPacked(m_wb.nlevsC,(unsigned short)rect.Width(),(unsigned short)rect.Height(),BORDER);
if (!m_pMosaicYPyr || !m_pMosaicUPyr || !m_pMosaicVPyr)
{
LOGE("Error: Could not allocate pyramids for blending");
return BLEND_RET_ERROR_MEMORY;
}
MosaicFrame *mb;
CSite *esite = m_AllSites + nsite;
int site_idx;
// First go through each frame and for each mosaic pixel determine which frame it should come from
site_idx = 0;
for(CSite *csite = m_AllSites; csite < esite; csite++)
{
if(cancelComputation)
{
if (m_pMosaicVPyr) free(m_pMosaicVPyr);
if (m_pMosaicUPyr) free(m_pMosaicUPyr);
if (m_pMosaicYPyr) free(m_pMosaicYPyr);
return BLEND_RET_CANCELLED;
}
mb = csite->getMb();
mb->vcrect = mb->brect;
ClipBlendRect(csite, mb->vcrect);
ComputeMask(csite, mb->vcrect, mb->brect, rect, imgMos, site_idx);
site_idx++;
}
////////// imgMos.Y, imgMos.V, imgMos.U are used as follows //////////////
////////////////////// THIN STRIP MODE ///////////////////////////////////
// imgMos.Y is used to store the index of the image from which each pixel
// in the output mosaic can be read out for the thin-strip mode. Thus,
// there is no special handling for pixels around the seam. Also, imgMos.Y
// is set to 255 wherever we can't get its value from any input image e.g.
// in the gray border areas. imgMos.V and imgMos.U are set to 128 for the
// thin-strip mode.
////////////////////// WIDE STRIP MODE ///////////////////////////////////
// imgMos.Y is used the same way as the thin-strip mode.
// imgMos.V is used to store the index of the neighboring image which
// should contribute to the color of an output pixel in a band around
// the seam. Thus, in this band, we will crossfade between the color values
// from the image index imgMos.Y and image index imgMos.V. imgMos.U is
// used to store the weight (multiplied by 100) that each image will
// contribute to the blending process. Thus, we start at 99% contribution
// from the first image, then go to 50% contribution from each image at
// the seam. Then, the contribution from the second image goes up to 99%.
// For WIDE mode, set the pixel masks to guide the blender to cross-fade
// between the images on either side of each seam:
if (m_wb.stripType == STRIP_TYPE_WIDE)
{
if(m_wb.horizontal)
{
// Set the number of pixels around the seam to cross-fade between
// the two component images,
int tw = STRIP_CROSS_FADE_WIDTH_PXLS;
// Proceed with the image index calculation for cross-fading
// only if the cross-fading width is larger than 0
if (tw > 0)
{
for(int y = 0; y < imgMos.Y.height; y++)
{
// Since we compare two adjecant pixels to determine
// whether there is a seam, the termination condition of x
// is set to imgMos.Y.width - tw, so that x+1 below
// won't exceed the imgMos' boundary.
for(int x = tw; x < imgMos.Y.width - tw; )
{
// Determine where the seam is...
if (imgMos.Y.ptr[y][x] != imgMos.Y.ptr[y][x+1] &&
imgMos.Y.ptr[y][x] != 255 &&
imgMos.Y.ptr[y][x+1] != 255)
{
// Find the image indices on both sides of the seam
unsigned char idx1 = imgMos.Y.ptr[y][x];
unsigned char idx2 = imgMos.Y.ptr[y][x+1];
for (int o = tw; o >= 0; o--)
{
// Set the image index to use for cross-fading
imgMos.V.ptr[y][x - o] = idx2;
// Set the intensity weights to use for cross-fading
imgMos.U.ptr[y][x - o] = 50 + (99 - 50) * o / tw;
}
for (int o = 1; o <= tw; o++)
{
// Set the image index to use for cross-fading
imgMos.V.ptr[y][x + o] = idx1;
// Set the intensity weights to use for cross-fading
imgMos.U.ptr[y][x + o] = imgMos.U.ptr[y][x - o];
}
x += (tw + 1);
}
else
{
x++;
}
}
}
}
}
else
{
// Set the number of pixels around the seam to cross-fade between
// the two component images,
int tw = STRIP_CROSS_FADE_WIDTH_PXLS;
// Proceed with the image index calculation for cross-fading
// only if the cross-fading width is larger than 0
if (tw > 0)
{
for(int x = 0; x < imgMos.Y.width; x++)
{
// Since we compare two adjecant pixels to determine
// whether there is a seam, the termination condition of y
// is set to imgMos.Y.height - tw, so that y+1 below
// won't exceed the imgMos' boundary.
for(int y = tw; y < imgMos.Y.height - tw; )
{
// Determine where the seam is...
if (imgMos.Y.ptr[y][x] != imgMos.Y.ptr[y+1][x] &&
imgMos.Y.ptr[y][x] != 255 &&
imgMos.Y.ptr[y+1][x] != 255)
{
// Find the image indices on both sides of the seam
unsigned char idx1 = imgMos.Y.ptr[y][x];
unsigned char idx2 = imgMos.Y.ptr[y+1][x];
for (int o = tw; o >= 0; o--)
{
// Set the image index to use for cross-fading
imgMos.V.ptr[y - o][x] = idx2;
// Set the intensity weights to use for cross-fading
imgMos.U.ptr[y - o][x] = 50 + (99 - 50) * o / tw;
}
for (int o = 1; o <= tw; o++)
{
// Set the image index to use for cross-fading
imgMos.V.ptr[y + o][x] = idx1;
// Set the intensity weights to use for cross-fading
imgMos.U.ptr[y + o][x] = imgMos.U.ptr[y - o][x];
}
y += (tw + 1);
}
else
{
y++;
}
}
}
}
}
}
// Now perform the actual blending using the frame assignment determined above
site_idx = 0;
for(CSite *csite = m_AllSites; csite < esite; csite++)
{
if(cancelComputation)
{
if (m_pMosaicVPyr) free(m_pMosaicVPyr);
if (m_pMosaicUPyr) free(m_pMosaicUPyr);
if (m_pMosaicYPyr) free(m_pMosaicYPyr);
return BLEND_RET_CANCELLED;
}
mb = csite->getMb();
if(FillFramePyramid(mb)!=BLEND_RET_OK)
return BLEND_RET_ERROR;
ProcessPyramidForThisFrame(csite, mb->vcrect, mb->brect, rect, imgMos, mb->trs, site_idx);
progress += TIME_PERCENT_BLEND/nsite;
site_idx++;
}
// Blend
PerformFinalBlending(imgMos, cropping_rect);
if (cropping_rect.Width() <= 0 || cropping_rect.Height() <= 0)
{
LOGE("Size of the cropping_rect is invalid - (width, height): (%d, %d)",
cropping_rect.Width(), cropping_rect.Height());
return BLEND_RET_ERROR;
}
if (m_pMosaicVPyr) free(m_pMosaicVPyr);
if (m_pMosaicUPyr) free(m_pMosaicUPyr);
if (m_pMosaicYPyr) free(m_pMosaicYPyr);
progress += TIME_PERCENT_FINAL;
return BLEND_RET_OK;
}
void Blend::CropFinalMosaic(YUVinfo &imgMos, MosaicRect &cropping_rect)
{
int i, j, k;
ImageType yimg;
ImageType uimg;
ImageType vimg;
yimg = imgMos.Y.ptr[0];
uimg = imgMos.U.ptr[0];
vimg = imgMos.V.ptr[0];
k = 0;
for (j = cropping_rect.top; j <= cropping_rect.bottom; j++)
{
for (i = cropping_rect.left; i <= cropping_rect.right; i++)
{
yimg[k] = yimg[j*imgMos.Y.width+i];
k++;
}
}
for (j = cropping_rect.top; j <= cropping_rect.bottom; j++)
{
for (i = cropping_rect.left; i <= cropping_rect.right; i++)
{
yimg[k] = vimg[j*imgMos.Y.width+i];
k++;
}
}
for (j = cropping_rect.top; j <= cropping_rect.bottom; j++)
{
for (i = cropping_rect.left; i <= cropping_rect.right; i++)
{
yimg[k] = uimg[j*imgMos.Y.width+i];
k++;
}
}
}
int Blend::PerformFinalBlending(YUVinfo &imgMos, MosaicRect &cropping_rect)
{
if (!PyramidShort::BorderExpand(m_pMosaicYPyr, m_wb.nlevs, 1) || !PyramidShort::BorderExpand(m_pMosaicUPyr, m_wb.nlevsC, 1) ||
!PyramidShort::BorderExpand(m_pMosaicVPyr, m_wb.nlevsC, 1))
{
LOGE("Error: Could not BorderExpand!");
return BLEND_RET_ERROR;
}
ImageTypeShort myimg;
ImageTypeShort muimg;
ImageTypeShort mvimg;
ImageType yimg;
ImageType uimg;
ImageType vimg;
int cx = (int)imgMos.Y.width/2;
int cy = (int)imgMos.Y.height/2;
// 2D boolean array that contains true wherever the mosaic image data is
// invalid (i.e. in the gray border).
bool **b = new bool*[imgMos.Y.height];
for(int j=0; j<imgMos.Y.height; j++)
{
b[j] = new bool[imgMos.Y.width];
}
// Copy the resulting image into the full image using the mask
int i, j;
yimg = imgMos.Y.ptr[0];
uimg = imgMos.U.ptr[0];
vimg = imgMos.V.ptr[0];
for (j = 0; j < imgMos.Y.height; j++)
{
myimg = m_pMosaicYPyr->ptr[j];
muimg = m_pMosaicUPyr->ptr[j];
mvimg = m_pMosaicVPyr->ptr[j];
for (i = 0; i<imgMos.Y.width; i++)
{
// A final mask was set up previously,
// if the value is zero skip it, otherwise replace it.
if (*yimg <255)
{
short value = (short) ((*myimg) >> 3);
if (value < 0) value = 0;
else if (value > 255) value = 255;
*yimg = (unsigned char) value;
value = (short) ((*muimg) >> 3);
if (value < 0) value = 0;
else if (value > 255) value = 255;
*uimg = (unsigned char) value;
value = (short) ((*mvimg) >> 3);
if (value < 0) value = 0;
else if (value > 255) value = 255;
*vimg = (unsigned char) value;
b[j][i] = false;
}
else
{ // set border color in here
*yimg = (unsigned char) 96;
*uimg = (unsigned char) 128;
*vimg = (unsigned char) 128;
b[j][i] = true;
}
yimg++;
uimg++;
vimg++;
myimg++;
muimg++;
mvimg++;
}
}
if(m_wb.horizontal)
{
//Scan through each row and increment top if the row contains any gray
for (j = 0; j < imgMos.Y.height; j++)
{
for (i = cropping_rect.left; i < cropping_rect.right; i++)
{
if (b[j][i])
{
break; // to next row
}
}
if (i == cropping_rect.right) //no gray pixel in this row!
{
cropping_rect.top = j;
break;
}
}
//Scan through each row and decrement bottom if the row contains any gray
for (j = imgMos.Y.height-1; j >= 0; j--)
{
for (i = cropping_rect.left; i < cropping_rect.right; i++)
{
if (b[j][i])
{
break; // to next row
}
}
if (i == cropping_rect.right) //no gray pixel in this row!
{
cropping_rect.bottom = j;
break;
}
}
}
else // Vertical Mosaic
{
//Scan through each column and increment left if the column contains any gray
for (i = 0; i < imgMos.Y.width; i++)
{
for (j = cropping_rect.top; j < cropping_rect.bottom; j++)
{
if (b[j][i])
{
break; // to next column
}
}
if (j == cropping_rect.bottom) //no gray pixel in this column!
{
cropping_rect.left = i;
break;
}
}
//Scan through each column and decrement right if the column contains any gray
for (i = imgMos.Y.width-1; i >= 0; i--)
{
for (j = cropping_rect.top; j < cropping_rect.bottom; j++)
{
if (b[j][i])
{
break; // to next column
}
}
if (j == cropping_rect.bottom) //no gray pixel in this column!
{
cropping_rect.right = i;
break;
}
}
}
RoundingCroppingSizeToMultipleOf8(cropping_rect);
for(int j=0; j<imgMos.Y.height; j++)
{
delete b[j];
}
delete b;
return BLEND_RET_OK;
}
void Blend::RoundingCroppingSizeToMultipleOf8(MosaicRect &rect) {
int height = rect.bottom - rect.top + 1;
int residue = height & 7;
rect.bottom -= residue;
int width = rect.right - rect.left + 1;
residue = width & 7;
rect.right -= residue;
}
void Blend::ComputeMask(CSite *csite, BlendRect &vcrect, BlendRect &brect, MosaicRect &rect, YUVinfo &imgMos, int site_idx)
{
PyramidShort *dptr = m_pMosaicYPyr;
int nC = m_wb.nlevsC;
int l = (int) ((vcrect.lft - rect.left));
int b = (int) ((vcrect.bot - rect.top));
int r = (int) ((vcrect.rgt - rect.left));
int t = (int) ((vcrect.top - rect.top));
if (vcrect.lft == brect.lft)
l = (l <= 0) ? -BORDER : l - BORDER;
else if (l < -BORDER)
l = -BORDER;
if (vcrect.bot == brect.bot)
b = (b <= 0) ? -BORDER : b - BORDER;
else if (b < -BORDER)
b = -BORDER;
if (vcrect.rgt == brect.rgt)
r = (r >= dptr->width) ? dptr->width + BORDER - 1 : r + BORDER;
else if (r >= dptr->width + BORDER)
r = dptr->width + BORDER - 1;
if (vcrect.top == brect.top)
t = (t >= dptr->height) ? dptr->height + BORDER - 1 : t + BORDER;
else if (t >= dptr->height + BORDER)
t = dptr->height + BORDER - 1;
// Walk the Region of interest and populate the pyramid
for (int j = b; j <= t; j++)
{
int jj = j;
double sj = jj + rect.top;
for (int i = l; i <= r; i++)
{
int ii = i;
// project point and then triangulate to neighbors
double si = ii + rect.left;
double dself = hypotSq(csite->getVCenter().x - si, csite->getVCenter().y - sj);
int inMask = ((unsigned) ii < imgMos.Y.width &&
(unsigned) jj < imgMos.Y.height) ? 1 : 0;
if(!inMask)
continue;
// scan the neighbors to see if this is a valid position
unsigned char mask = (unsigned char) 255;
SEdgeVector *ce;
int ecnt;
for (ce = csite->getNeighbor(), ecnt = csite->getNumNeighbors(); ecnt--; ce++)
{
double d1 = hypotSq(m_AllSites[ce->second].getVCenter().x - si,
m_AllSites[ce->second].getVCenter().y - sj);
if (d1 < dself)
{
break;
}
}
if (ecnt >= 0) continue;
imgMos.Y.ptr[jj][ii] = (unsigned char)site_idx;
}
}
}
void Blend::ProcessPyramidForThisFrame(CSite *csite, BlendRect &vcrect, BlendRect &brect, MosaicRect &rect, YUVinfo &imgMos, double trs[3][3], int site_idx)
{
// Put the Region of interest (for all levels) into m_pMosaicYPyr
double inv_trs[3][3];
inv33d(trs, inv_trs);
// Process each pyramid level
PyramidShort *sptr = m_pFrameYPyr;
PyramidShort *suptr = m_pFrameUPyr;
PyramidShort *svptr = m_pFrameVPyr;
PyramidShort *dptr = m_pMosaicYPyr;
PyramidShort *duptr = m_pMosaicUPyr;
PyramidShort *dvptr = m_pMosaicVPyr;
int dscale = 0; // distance scale for the current level
int nC = m_wb.nlevsC;
for (int n = m_wb.nlevs; n--; dscale++, dptr++, sptr++, dvptr++, duptr++, svptr++, suptr++, nC--)
{
int l = (int) ((vcrect.lft - rect.left) / (1 << dscale));
int b = (int) ((vcrect.bot - rect.top) / (1 << dscale));
int r = (int) ((vcrect.rgt - rect.left) / (1 << dscale) + .5);
int t = (int) ((vcrect.top - rect.top) / (1 << dscale) + .5);
if (vcrect.lft == brect.lft)
l = (l <= 0) ? -BORDER : l - BORDER;
else if (l < -BORDER)
l = -BORDER;
if (vcrect.bot == brect.bot)
b = (b <= 0) ? -BORDER : b - BORDER;
else if (b < -BORDER)
b = -BORDER;
if (vcrect.rgt == brect.rgt)
r = (r >= dptr->width) ? dptr->width + BORDER - 1 : r + BORDER;
else if (r >= dptr->width + BORDER)
r = dptr->width + BORDER - 1;
if (vcrect.top == brect.top)
t = (t >= dptr->height) ? dptr->height + BORDER - 1 : t + BORDER;
else if (t >= dptr->height + BORDER)
t = dptr->height + BORDER - 1;
// Walk the Region of interest and populate the pyramid
for (int j = b; j <= t; j++)
{
int jj = (j << dscale);
double sj = jj + rect.top;
for (int i = l; i <= r; i++)
{
int ii = (i << dscale);
// project point and then triangulate to neighbors
double si = ii + rect.left;
int inMask = ((unsigned) ii < imgMos.Y.width &&
(unsigned) jj < imgMos.Y.height) ? 1 : 0;
if(inMask && imgMos.Y.ptr[jj][ii] != site_idx &&
imgMos.V.ptr[jj][ii] != site_idx &&
imgMos.Y.ptr[jj][ii] != 255)
continue;
// Setup weights for cross-fading
// Weight of the intensity already in the output pixel
double wt0 = 0.0;
// Weight of the intensity from the input pixel (current frame)
double wt1 = 1.0;
if (m_wb.stripType == STRIP_TYPE_WIDE)
{
if(inMask && imgMos.Y.ptr[jj][ii] != 255)
{
// If not on a seam OR pyramid level exceeds
// maximum level for cross-fading.
if((imgMos.V.ptr[jj][ii] == 128) ||
(dscale > STRIP_CROSS_FADE_MAX_PYR_LEVEL))
{
wt0 = 0.0;
wt1 = 1.0;
}
else
{
wt0 = 1.0;
wt1 = ((imgMos.Y.ptr[jj][ii] == site_idx) ?
(double)imgMos.U.ptr[jj][ii] / 100.0 :
1.0 - (double)imgMos.U.ptr[jj][ii] / 100.0);
}
}
}
// Project this mosaic point into the original frame coordinate space
double xx, yy;
MosaicToFrame(inv_trs, si, sj, xx, yy);
if (xx < 0.0 || yy < 0.0 || xx > width - 1.0 || yy > height - 1.0)
{
if(inMask)
{
imgMos.Y.ptr[jj][ii] = 255;
wt0 = 0.0f;
wt1 = 1.0f;
}
}
xx /= (1 << dscale);
yy /= (1 << dscale);
int x1 = (xx >= 0.0) ? (int) xx : (int) floor(xx);
int y1 = (yy >= 0.0) ? (int) yy : (int) floor(yy);
// Final destination in extended pyramid
#ifndef LINEAR_INTERP
if(inSegment(x1, sptr->width, BORDER-1) &&
inSegment(y1, sptr->height, BORDER-1))
{
double xfrac = xx - x1;
double yfrac = yy - y1;
dptr->ptr[j][i] = (short) (wt0 * dptr->ptr[j][i] + .5 +
wt1 * ciCalc(sptr, x1, y1, xfrac, yfrac));
if (dvptr >= m_pMosaicVPyr && nC > 0)
{
duptr->ptr[j][i] = (short) (wt0 * duptr->ptr[j][i] + .5 +
wt1 * ciCalc(suptr, x1, y1, xfrac, yfrac));
dvptr->ptr[j][i] = (short) (wt0 * dvptr->ptr[j][i] + .5 +
wt1 * ciCalc(svptr, x1, y1, xfrac, yfrac));
}
}
#else
if(inSegment(x1, sptr->width, BORDER) && inSegment(y1, sptr->height, BORDER))
{
int x2 = x1 + 1;
int y2 = y1 + 1;
double xfrac = xx - x1;
double yfrac = yy - y1;
double y1val = sptr->ptr[y1][x1] +
(sptr->ptr[y1][x2] - sptr->ptr[y1][x1]) * xfrac;
double y2val = sptr->ptr[y2][x1] +
(sptr->ptr[y2][x2] - sptr->ptr[y2][x1]) * xfrac;
dptr->ptr[j][i] = (short) (y1val + yfrac * (y2val - y1val));
if (dvptr >= m_pMosaicVPyr && nC > 0)
{
y1val = suptr->ptr[y1][x1] +
(suptr->ptr[y1][x2] - suptr->ptr[y1][x1]) * xfrac;
y2val = suptr->ptr[y2][x1] +
(suptr->ptr[y2][x2] - suptr->ptr[y2][x1]) * xfrac;
duptr->ptr[j][i] = (short) (y1val + yfrac * (y2val - y1val));
y1val = svptr->ptr[y1][x1] +
(svptr->ptr[y1][x2] - svptr->ptr[y1][x1]) * xfrac;
y2val = svptr->ptr[y2][x1] +
(svptr->ptr[y2][x2] - svptr->ptr[y2][x1]) * xfrac;
dvptr->ptr[j][i] = (short) (y1val + yfrac * (y2val - y1val));
}
}
#endif
else
{
clipToSegment(x1, sptr->width, BORDER);
clipToSegment(y1, sptr->height, BORDER);
dptr->ptr[j][i] = (short) (wt0 * dptr->ptr[j][i] + 0.5 +
wt1 * sptr->ptr[y1][x1] );
if (dvptr >= m_pMosaicVPyr && nC > 0)
{
dvptr->ptr[j][i] = (short) (wt0 * dvptr->ptr[j][i] +
0.5 + wt1 * svptr->ptr[y1][x1] );
duptr->ptr[j][i] = (short) (wt0 * duptr->ptr[j][i] +
0.5 + wt1 * suptr->ptr[y1][x1] );
}
}
}
}
}
}
void Blend::MosaicToFrame(double trs[3][3], double x, double y, double &wx, double &wy)
{
double X, Y, z;
if (m_wb.theta == 0.0)
{
X = x;
Y = y;
}
else if (m_wb.horizontal)
{
double alpha = x * m_wb.direction / m_wb.width;
double length = (y - alpha * m_wb.correction) * m_wb.direction + m_wb.radius;
double deltaTheta = m_wb.theta * alpha;
double sinTheta = sin(deltaTheta);
double cosTheta = sqrt(1.0 - sinTheta * sinTheta) * m_wb.direction;
X = length * sinTheta + m_wb.x;
Y = length * cosTheta + m_wb.y;
}
else
{
double alpha = y * m_wb.direction / m_wb.width;
double length = (x - alpha * m_wb.correction) * m_wb.direction + m_wb.radius;
double deltaTheta = m_wb.theta * alpha;
double sinTheta = sin(deltaTheta);
double cosTheta = sqrt(1.0 - sinTheta * sinTheta) * m_wb.direction;
Y = length * sinTheta + m_wb.y;
X = length * cosTheta + m_wb.x;
}
z = ProjZ(trs, X, Y, 1.0);
wx = ProjX(trs, X, Y, z, 1.0);
wy = ProjY(trs, X, Y, z, 1.0);
}
void Blend::FrameToMosaic(double trs[3][3], double x, double y, double &wx, double &wy)
{
// Project into the intermediate Mosaic coordinate system
double z = ProjZ(trs, x, y, 1.0);
double X = ProjX(trs, x, y, z, 1.0);
double Y = ProjY(trs, x, y, z, 1.0);
if (m_wb.theta == 0.0)
{
// No rotation, then this is all we need to do.
wx = X;
wy = Y;
}
else if (m_wb.horizontal)
{
double deltaX = X - m_wb.x;
double deltaY = Y - m_wb.y;
double length = sqrt(deltaX * deltaX + deltaY * deltaY);
double deltaTheta = asin(deltaX / length);
double alpha = deltaTheta / m_wb.theta;
wx = alpha * m_wb.width * m_wb.direction;
wy = (length - m_wb.radius) * m_wb.direction + alpha * m_wb.correction;
}
else
{
double deltaX = X - m_wb.x;
double deltaY = Y - m_wb.y;
double length = sqrt(deltaX * deltaX + deltaY * deltaY);
double deltaTheta = asin(deltaY / length);
double alpha = deltaTheta / m_wb.theta;
wy = alpha * m_wb.width * m_wb.direction;
wx = (length - m_wb.radius) * m_wb.direction + alpha * m_wb.correction;
}
}
// Clip the region of interest as small as possible by using the Voronoi edges of
// the neighbors
void Blend::ClipBlendRect(CSite *csite, BlendRect &brect)
{
SEdgeVector *ce;
int ecnt;
for (ce = csite->getNeighbor(), ecnt = csite->getNumNeighbors(); ecnt--; ce++)
{
// calculate the Voronoi bisector intersection
const double epsilon = 1e-5;
double dx = (m_AllSites[ce->second].getVCenter().x - m_AllSites[ce->first].getVCenter().x);
double dy = (m_AllSites[ce->second].getVCenter().y - m_AllSites[ce->first].getVCenter().y);
double xmid = m_AllSites[ce->first].getVCenter().x + dx/2.0;
double ymid = m_AllSites[ce->first].getVCenter().y + dy/2.0;
double inter;
if (dx > epsilon)
{
// neighbor is on right
if ((inter = m_wb.roundoffOverlap + xmid - dy * (((dy >= 0.0) ? brect.bot : brect.top) - ymid) / dx) < brect.rgt)
brect.rgt = inter;
}
else if (dx < -epsilon)
{
// neighbor is on left
if ((inter = -m_wb.roundoffOverlap + xmid - dy * (((dy >= 0.0) ? brect.bot : brect.top) - ymid) / dx) > brect.lft)
brect.lft = inter;
}
if (dy > epsilon)
{
// neighbor is above
if ((inter = m_wb.roundoffOverlap + ymid - dx * (((dx >= 0.0) ? brect.lft : brect.rgt) - xmid) / dy) < brect.top)
brect.top = inter;
}
else if (dy < -epsilon)
{
// neighbor is below
if ((inter = -m_wb.roundoffOverlap + ymid - dx * (((dx >= 0.0) ? brect.lft : brect.rgt) - xmid) / dy) > brect.bot)
brect.bot = inter;
}
}
}
void Blend::FrameToMosaicRect(int width, int height, double trs[3][3], BlendRect &brect)
{
// We need to walk the perimeter since the borders can be bent.
brect.lft = brect.bot = 2e30;
brect.rgt = brect.top = -2e30;
double xpos, ypos;
double lasty = height - 1.0;
double lastx = width - 1.0;
int i;
for (i = width; i--;)
{
FrameToMosaic(trs, (double) i, 0.0, xpos, ypos);
ClipRect(xpos, ypos, brect);
FrameToMosaic(trs, (double) i, lasty, xpos, ypos);
ClipRect(xpos, ypos, brect);
}
for (i = height; i--;)
{
FrameToMosaic(trs, 0.0, (double) i, xpos, ypos);
ClipRect(xpos, ypos, brect);
FrameToMosaic(trs, lastx, (double) i, xpos, ypos);
ClipRect(xpos, ypos, brect);
}
}
void Blend::SelectRelevantFrames(MosaicFrame **frames, int frames_size,
MosaicFrame **relevant_frames, int &relevant_frames_size)
{
MosaicFrame *first = frames[0];
MosaicFrame *last = frames[frames_size-1];
MosaicFrame *mb;
double fxpos = first->trs[0][2], fypos = first->trs[1][2];
double midX = last->width / 2.0;
double midY = last->height / 2.0;
double z = ProjZ(first->trs, midX, midY, 1.0);
double firstX, firstY;
double prevX = firstX = ProjX(first->trs, midX, midY, z, 1.0);
double prevY = firstY = ProjY(first->trs, midX, midY, z, 1.0);
relevant_frames[0] = first; // Add first frame by default
relevant_frames_size = 1;
for (int i = 0; i < frames_size - 1; i++)
{
mb = frames[i];
double currX, currY;
z = ProjZ(mb->trs, midX, midY, 1.0);
currX = ProjX(mb->trs, midX, midY, z, 1.0);
currY = ProjY(mb->trs, midX, midY, z, 1.0);
double deltaX = currX - prevX;
double deltaY = currY - prevY;
double center2centerDist = sqrt(deltaY * deltaY + deltaX * deltaX);
if (fabs(deltaX) > STRIP_SEPARATION_THRESHOLD_PXLS ||
fabs(deltaY) > STRIP_SEPARATION_THRESHOLD_PXLS)
{
relevant_frames[relevant_frames_size] = mb;
relevant_frames_size++;
prevX = currX;
prevY = currY;
}
}
// Add last frame by default
relevant_frames[relevant_frames_size] = last;
relevant_frames_size++;
}
void Blend::ComputeBlendParameters(MosaicFrame **frames, int frames_size, int is360)
{
// For FULL and PAN modes, we do not unwarp the mosaic into a rectangular coordinate system
// and so we set the theta to 0 and return.
if (m_wb.blendingType != BLEND_TYPE_CYLPAN && m_wb.blendingType != BLEND_TYPE_HORZ)
{
m_wb.theta = 0.0;
return;
}
MosaicFrame *first = frames[0];
MosaicFrame *last = frames[frames_size-1];
MosaicFrame *mb;
double lxpos = last->trs[0][2], lypos = last->trs[1][2];
double fxpos = first->trs[0][2], fypos = first->trs[1][2];
// Calculate warp to produce proper stitching.
// get x, y displacement
double midX = last->width / 2.0;
double midY = last->height / 2.0;
double z = ProjZ(first->trs, midX, midY, 1.0);
double firstX, firstY;
double prevX = firstX = ProjX(first->trs, midX, midY, z, 1.0);
double prevY = firstY = ProjY(first->trs, midX, midY, z, 1.0);
double arcLength, lastTheta;
m_wb.theta = lastTheta = arcLength = 0.0;
// Step through all the frames to compute the total arc-length of the cone
// swept while capturing the mosaic (in the original conical coordinate system).
for (int i = 0; i < frames_size; i++)
{
mb = frames[i];
double currX, currY;
z = ProjZ(mb->trs, midX, midY, 1.0);
currX = ProjX(mb->trs, midX, midY, z, 1.0);
currY = ProjY(mb->trs, midX, midY, z, 1.0);
double deltaX = currX - prevX;
double deltaY = currY - prevY;
// The arcLength is computed by summing the lengths of the chords
// connecting the pairwise projected image centers of the input image frames.
arcLength += sqrt(deltaY * deltaY + deltaX * deltaX);
if (!is360)
{
double thisTheta = asin(mb->trs[1][0]);
m_wb.theta += thisTheta - lastTheta;
lastTheta = thisTheta;
}
prevX = currX;
prevY = currY;
}
// Stretch this to end at the proper alignment i.e. the width of the
// rectangle is determined by the arcLength computed above and the cone
// sector angle is determined using the rotation of the last frame.
m_wb.width = arcLength;
if (is360) m_wb.theta = asin(last->trs[1][0]);
// If there is no rotation, we're done.
if (m_wb.theta != 0.0)
{
double dx = prevX - firstX;
double dy = prevY - firstY;
// If the mosaic was captured by sweeping horizontally
if (abs(lxpos - fxpos) > abs(lypos - fypos))
{
m_wb.horizontal = 1;
// Calculate radius position to make ends exactly the same Y offset
double radiusTheta = dx / cos(3.14159 / 2.0 - m_wb.theta);
m_wb.radius = dy + radiusTheta * cos(m_wb.theta);
if (m_wb.radius < 0.0) m_wb.radius = -m_wb.radius;
}
else
{
m_wb.horizontal = 0;
// Calculate radius position to make ends exactly the same Y offset
double radiusTheta = dy / cos(3.14159 / 2.0 - m_wb.theta);
m_wb.radius = dx + radiusTheta * cos(m_wb.theta);
if (m_wb.radius < 0.0) m_wb.radius = -m_wb.radius;
}
// Determine major direction
if (m_wb.horizontal)
{
// Horizontal strip
// m_wb.x,y record the origin of the rectangle coordinate system.
if (is360) m_wb.x = firstX;
else
{
if (lxpos - fxpos < 0)
{
m_wb.x = firstX + midX;
z = ProjZ(last->trs, 0.0, midY, 1.0);
prevX = ProjX(last->trs, 0.0, midY, z, 1.0);
prevY = ProjY(last->trs, 0.0, midY, z, 1.0);
}
else
{
m_wb.x = firstX - midX;
z = ProjZ(last->trs, last->width - 1.0, midY, 1.0);
prevX = ProjX(last->trs, last->width - 1.0, midY, z, 1.0);
prevY = ProjY(last->trs, last->width - 1.0, midY, z, 1.0);
}
}
dy = prevY - firstY;
if (dy < 0.0) m_wb.direction = 1.0;
else m_wb.direction = -1.0;
m_wb.y = firstY - m_wb.radius * m_wb.direction;
if (dy * m_wb.theta > 0.0) m_wb.width = -m_wb.width;
}
else
{
// Vertical strip
if (is360) m_wb.y = firstY;
else
{
if (lypos - fypos < 0)
{
m_wb.x = firstY + midY;
z = ProjZ(last->trs, midX, 0.0, 1.0);
prevX = ProjX(last->trs, midX, 0.0, z, 1.0);
prevY = ProjY(last->trs, midX, 0.0, z, 1.0);
}
else
{
m_wb.x = firstX - midX;
z = ProjZ(last->trs, midX, last->height - 1.0, 1.0);
prevX = ProjX(last->trs, midX, last->height - 1.0, z, 1.0);
prevY = ProjY(last->trs, midX, last->height - 1.0, z, 1.0);
}
}
dx = prevX - firstX;
if (dx < 0.0) m_wb.direction = 1.0;
else m_wb.direction = -1.0;
m_wb.x = firstX - m_wb.radius * m_wb.direction;
if (dx * m_wb.theta > 0.0) m_wb.width = -m_wb.width;
}
// Calculate the correct correction factor
double deltaX = prevX - m_wb.x;
double deltaY = prevY - m_wb.y;
double length = sqrt(deltaX * deltaX + deltaY * deltaY);
double deltaTheta = (m_wb.horizontal) ? deltaX : deltaY;
deltaTheta = asin(deltaTheta / length);
m_wb.correction = ((m_wb.radius - length) * m_wb.direction) /
(deltaTheta / m_wb.theta);
}
}