/*M///////////////////////////////////////////////////////////////////////////////////////
//
// IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
//
// By downloading, copying, installing or using the software you agree to this license.
// If you do not agree to this license, do not download, install,
// copy or use the software.
//
//
// Intel License Agreement
// For Open Source Computer Vision Library
//
// Copyright (C) 2000, Intel Corporation, all rights reserved.
// Third party copyrights are property of their respective owners.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//
// * Redistribution's of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// * Redistribution's in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
//
// * The name of Intel Corporation may not be used to endorse or promote products
// derived from this software without specific prior written permission.
//
// This software is provided by the copyright holders and contributors "as is" and
// any express or implied warranties, including, but not limited to, the implied
// warranties of merchantability and fitness for a particular purpose are disclaimed.
// In no event shall the Intel Corporation or contributors be liable for any direct,
// indirect, incidental, special, exemplary, or consequential damages
// (including, but not limited to, procurement of substitute goods or services;
// loss of use, data, or profits; or business interruption) however caused
// and on any theory of liability, whether in contract, strict liability,
// or tort (including negligence or otherwise) arising in any way out of
// the use of this software, even if advised of the possibility of such damage.
//
//M*/
#include "_cv.h"
CV_IMPL CvSubdiv2D *
cvCreateSubdiv2D( int subdiv_type, int header_size,
int vtx_size, int quadedge_size, CvMemStorage * storage )
{
CvSubdiv2D *subdiv = 0;
CV_FUNCNAME( "cvCleateSubdiv2D" );
__BEGIN__;
if( !storage )
CV_ERROR( CV_StsNullPtr, "" );
if( header_size < (int)sizeof( *subdiv ) ||
quadedge_size < (int)sizeof( CvQuadEdge2D ) ||
vtx_size < (int)sizeof( CvSubdiv2DPoint ))
CV_ERROR_FROM_STATUS( CV_BADSIZE_ERR );
subdiv = (CvSubdiv2D *) cvCreateGraph( subdiv_type, header_size,
vtx_size, quadedge_size, storage );
__END__;
return subdiv;
}
/****************************************************************************************\
* Quad Edge algebra *
\****************************************************************************************/
static CvSubdiv2DEdge
cvSubdiv2DMakeEdge( CvSubdiv2D * subdiv )
{
CvQuadEdge2D *edge = 0;
CvSubdiv2DEdge edgehandle = 0;
CV_FUNCNAME( "cvSubdiv2DMakeEdge" );
__BEGIN__;
if( !subdiv )
CV_ERROR( CV_StsNullPtr, "" );
edge = (CvQuadEdge2D*)cvSetNew( (CvSet*)subdiv->edges );
CV_CHECK();
memset( edge->pt, 0, sizeof( edge->pt ));
edgehandle = (CvSubdiv2DEdge) edge;
edge->next[0] = edgehandle;
edge->next[1] = edgehandle + 3;
edge->next[2] = edgehandle + 2;
edge->next[3] = edgehandle + 1;
subdiv->quad_edges++;
__END__;
return edgehandle;
}
static CvSubdiv2DPoint *
cvSubdiv2DAddPoint( CvSubdiv2D * subdiv, CvPoint2D32f pt, int is_virtual )
{
CvSubdiv2DPoint *subdiv_point = 0;
subdiv_point = (CvSubdiv2DPoint*)cvSetNew( (CvSet*)subdiv );
if( subdiv_point )
{
memset( subdiv_point, 0, subdiv->elem_size );
subdiv_point->pt = pt;
subdiv_point->first = 0;
subdiv_point->flags |= is_virtual ? CV_SUBDIV2D_VIRTUAL_POINT_FLAG : 0;
}
return subdiv_point;
}
static void
cvSubdiv2DSplice( CvSubdiv2DEdge edgeA, CvSubdiv2DEdge edgeB )
{
CvSubdiv2DEdge *a_next = &CV_SUBDIV2D_NEXT_EDGE( edgeA );
CvSubdiv2DEdge *b_next = &CV_SUBDIV2D_NEXT_EDGE( edgeB );
CvSubdiv2DEdge a_rot = cvSubdiv2DRotateEdge( *a_next, 1 );
CvSubdiv2DEdge b_rot = cvSubdiv2DRotateEdge( *b_next, 1 );
CvSubdiv2DEdge *a_rot_next = &CV_SUBDIV2D_NEXT_EDGE( a_rot );
CvSubdiv2DEdge *b_rot_next = &CV_SUBDIV2D_NEXT_EDGE( b_rot );
CvSubdiv2DEdge t;
CV_SWAP( *a_next, *b_next, t );
CV_SWAP( *a_rot_next, *b_rot_next, t );
}
static void
cvSubdiv2DSetEdgePoints( CvSubdiv2DEdge edge,
CvSubdiv2DPoint * org_pt, CvSubdiv2DPoint * dst_pt )
{
CvQuadEdge2D *quadedge = (CvQuadEdge2D *) (edge & ~3);
CV_FUNCNAME( "cvSubdiv2DSetEdgePoints" );
__BEGIN__;
if( !quadedge )
CV_ERROR( CV_StsNullPtr, "" );
quadedge->pt[edge & 3] = org_pt;
quadedge->pt[(edge + 2) & 3] = dst_pt;
__END__;
}
static void
cvSubdiv2DDeleteEdge( CvSubdiv2D * subdiv, CvSubdiv2DEdge edge )
{
CvQuadEdge2D *quadedge = (CvQuadEdge2D *) (edge & ~3);
CV_FUNCNAME( "cvSubdiv2DDeleteEdge" );
__BEGIN__;
if( !subdiv || !quadedge )
CV_ERROR( CV_StsNullPtr, "" );
cvSubdiv2DSplice( edge, cvSubdiv2DGetEdge( edge, CV_PREV_AROUND_ORG ));
{
CvSubdiv2DEdge sym_edge = cvSubdiv2DSymEdge( edge );
cvSubdiv2DSplice( sym_edge, cvSubdiv2DGetEdge( sym_edge, CV_PREV_AROUND_ORG ));
}
cvSetRemoveByPtr( (CvSet*)(subdiv->edges), quadedge );
subdiv->quad_edges--;
__END__;
}
static CvSubdiv2DEdge
cvSubdiv2DConnectEdges( CvSubdiv2D * subdiv, CvSubdiv2DEdge edgeA, CvSubdiv2DEdge edgeB )
{
CvSubdiv2DEdge new_edge = 0;
CV_FUNCNAME( "cvSubdiv2DConnectPoints" );
__BEGIN__;
CvSubdiv2DPoint *orgB, *dstA;
if( !subdiv )
CV_ERROR( CV_StsNullPtr, "" );
new_edge = cvSubdiv2DMakeEdge( subdiv );
cvSubdiv2DSplice( new_edge, cvSubdiv2DGetEdge( edgeA, CV_NEXT_AROUND_LEFT ));
cvSubdiv2DSplice( cvSubdiv2DSymEdge( new_edge ), edgeB );
dstA = cvSubdiv2DEdgeDst( edgeA );
orgB = cvSubdiv2DEdgeOrg( edgeB );
cvSubdiv2DSetEdgePoints( new_edge, dstA, orgB );
__END__;
return new_edge;
}
static void
cvSubdiv2DSwapEdges( CvSubdiv2DEdge edge )
{
CvSubdiv2DEdge sym_edge = cvSubdiv2DSymEdge( edge );
CvSubdiv2DEdge a = cvSubdiv2DGetEdge( edge, CV_PREV_AROUND_ORG );
CvSubdiv2DEdge b = cvSubdiv2DGetEdge( sym_edge, CV_PREV_AROUND_ORG );
CvSubdiv2DPoint *dstB, *dstA;
cvSubdiv2DSplice( edge, a );
cvSubdiv2DSplice( sym_edge, b );
dstA = cvSubdiv2DEdgeDst( a );
dstB = cvSubdiv2DEdgeDst( b );
cvSubdiv2DSetEdgePoints( edge, dstA, dstB );
cvSubdiv2DSplice( edge, cvSubdiv2DGetEdge( a, CV_NEXT_AROUND_LEFT ));
cvSubdiv2DSplice( sym_edge, cvSubdiv2DGetEdge( b, CV_NEXT_AROUND_LEFT ));
}
static int
icvIsRightOf( CvPoint2D32f& pt, CvSubdiv2DEdge edge )
{
CvSubdiv2DPoint *org = cvSubdiv2DEdgeOrg(edge), *dst = cvSubdiv2DEdgeDst(edge);
Cv32suf cw_area;
cw_area.f = (float)cvTriangleArea( pt, dst->pt, org->pt );
return (cw_area.i > 0)*2 - (cw_area.i*2 != 0);
}
CV_IMPL CvSubdiv2DPointLocation
cvSubdiv2DLocate( CvSubdiv2D * subdiv, CvPoint2D32f pt,
CvSubdiv2DEdge * _edge, CvSubdiv2DPoint ** _point )
{
CvSubdiv2DEdge edge = 0;
CvSubdiv2DPoint *point = 0;
CvSubdiv2DPointLocation location = CV_PTLOC_ERROR;
int i, max_edges;
int right_of_curr = 0;
CV_FUNCNAME( "cvSubdiv2DLocate" );
__BEGIN__;
if( !subdiv )
CV_ERROR( CV_StsNullPtr, "" );
if( !CV_IS_SUBDIV2D(subdiv) )
CV_ERROR_FROM_STATUS( CV_BADFLAG_ERR );
max_edges = subdiv->quad_edges * 4;
edge = subdiv->recent_edge;
if( max_edges == 0 )
CV_ERROR_FROM_STATUS( CV_BADSIZE_ERR );
if( !edge )
CV_ERROR_FROM_STATUS( CV_NOTDEFINED_ERR );
location = CV_PTLOC_OUTSIDE_RECT;
if( pt.x < subdiv->topleft.x || pt.y < subdiv->topleft.y ||
pt.x >= subdiv->bottomright.x || pt.y >= subdiv->bottomright.y )
CV_ERROR_FROM_STATUS( CV_BADRANGE_ERR );
location = CV_PTLOC_ERROR;
right_of_curr = icvIsRightOf( pt, edge );
if( right_of_curr > 0 )
{
edge = cvSubdiv2DSymEdge( edge );
right_of_curr = -right_of_curr;
}
for( i = 0; i < max_edges; i++ )
{
CvSubdiv2DEdge onext_edge = cvSubdiv2DNextEdge( edge );
CvSubdiv2DEdge dprev_edge = cvSubdiv2DGetEdge( edge, CV_PREV_AROUND_DST );
int right_of_onext = icvIsRightOf( pt, onext_edge );
int right_of_dprev = icvIsRightOf( pt, dprev_edge );
if( right_of_dprev > 0 )
{
if( right_of_onext > 0 || (right_of_onext == 0 && right_of_curr == 0) )
{
location = CV_PTLOC_INSIDE;
EXIT;
}
else
{
right_of_curr = right_of_onext;
edge = onext_edge;
}
}
else
{
if( right_of_onext > 0 )
{
if( right_of_dprev == 0 && right_of_curr == 0 )
{
location = CV_PTLOC_INSIDE;
EXIT;
}
else
{
right_of_curr = right_of_dprev;
edge = dprev_edge;
}
}
else if( right_of_curr == 0 &&
icvIsRightOf( cvSubdiv2DEdgeDst( onext_edge )->pt, edge ) >= 0 )
{
edge = cvSubdiv2DSymEdge( edge );
}
else
{
right_of_curr = right_of_onext;
edge = onext_edge;
}
}
}
__END__;
subdiv->recent_edge = edge;
if( location == CV_PTLOC_INSIDE )
{
double t1, t2, t3;
CvPoint2D32f org_pt = cvSubdiv2DEdgeOrg( edge )->pt;
CvPoint2D32f dst_pt = cvSubdiv2DEdgeDst( edge )->pt;
t1 = fabs( pt.x - org_pt.x );
t1 += fabs( pt.y - org_pt.y );
t2 = fabs( pt.x - dst_pt.x );
t2 += fabs( pt.y - dst_pt.y );
t3 = fabs( org_pt.x - dst_pt.x );
t3 += fabs( org_pt.y - dst_pt.y );
if( t1 < FLT_EPSILON )
{
location = CV_PTLOC_VERTEX;
point = cvSubdiv2DEdgeOrg( edge );
edge = 0;
}
else if( t2 < FLT_EPSILON )
{
location = CV_PTLOC_VERTEX;
point = cvSubdiv2DEdgeDst( edge );
edge = 0;
}
else if( (t1 < t3 || t2 < t3) &&
fabs( cvTriangleArea( pt, org_pt, dst_pt )) < FLT_EPSILON )
{
location = CV_PTLOC_ON_EDGE;
point = 0;
}
}
if( location == CV_PTLOC_ERROR )
{
edge = 0;
point = 0;
}
if( _edge )
*_edge = edge;
if( _point )
*_point = point;
return location;
}
CV_INLINE int
icvIsPtInCircle3( CvPoint2D32f pt, CvPoint2D32f a, CvPoint2D32f b, CvPoint2D32f c )
{
double val = (a.x * a.x + a.y * a.y) * cvTriangleArea( b, c, pt );
val -= (b.x * b.x + b.y * b.y) * cvTriangleArea( a, c, pt );
val += (c.x * c.x + c.y * c.y) * cvTriangleArea( a, b, pt );
val -= (pt.x * pt.x + pt.y * pt.y) * cvTriangleArea( a, b, c );
return val > FLT_EPSILON ? 1 : val < -FLT_EPSILON ? -1 : 0;
}
CV_IMPL CvSubdiv2DPoint *
cvSubdivDelaunay2DInsert( CvSubdiv2D * subdiv, CvPoint2D32f pt )
{
CvSubdiv2DPoint *point = 0;
CvSubdiv2DPointLocation location = CV_PTLOC_ERROR;
CvSubdiv2DPoint *curr_point = 0, *first_point = 0;
CvSubdiv2DEdge curr_edge = 0, deleted_edge = 0, base_edge = 0;
int i, max_edges;
CV_FUNCNAME( "cvSubdivDelaunay2DInsert" );
__BEGIN__;
if( !subdiv )
CV_ERROR( CV_StsNullPtr, "" );
if( !CV_IS_SUBDIV2D(subdiv) )
CV_ERROR_FROM_STATUS( CV_BADFLAG_ERR );
location = cvSubdiv2DLocate( subdiv, pt, &curr_edge, &curr_point );
switch (location)
{
case CV_PTLOC_ERROR:
CV_ERROR_FROM_STATUS( CV_BADSIZE_ERR );
case CV_PTLOC_OUTSIDE_RECT:
CV_ERROR_FROM_STATUS( CV_BADRANGE_ERR );
case CV_PTLOC_VERTEX:
point = curr_point;
break;
case CV_PTLOC_ON_EDGE:
deleted_edge = curr_edge;
subdiv->recent_edge = curr_edge = cvSubdiv2DGetEdge( curr_edge, CV_PREV_AROUND_ORG );
cvSubdiv2DDeleteEdge( subdiv, deleted_edge );
/* no break */
case CV_PTLOC_INSIDE:
assert( curr_edge != 0 );
subdiv->is_geometry_valid = 0;
curr_point = cvSubdiv2DAddPoint( subdiv, pt, 0 );
CV_CHECK();
base_edge = cvSubdiv2DMakeEdge( subdiv );
first_point = cvSubdiv2DEdgeOrg( curr_edge );
cvSubdiv2DSetEdgePoints( base_edge, first_point, curr_point );
cvSubdiv2DSplice( base_edge, curr_edge );
do
{
base_edge = cvSubdiv2DConnectEdges( subdiv, curr_edge,
cvSubdiv2DSymEdge( base_edge ));
curr_edge = cvSubdiv2DGetEdge( base_edge, CV_PREV_AROUND_ORG );
}
while( cvSubdiv2DEdgeDst( curr_edge ) != first_point );
curr_edge = cvSubdiv2DGetEdge( base_edge, CV_PREV_AROUND_ORG );
max_edges = subdiv->quad_edges * 4;
for( i = 0; i < max_edges; i++ )
{
CvSubdiv2DPoint *temp_dst = 0, *curr_org = 0, *curr_dst = 0;
CvSubdiv2DEdge temp_edge = cvSubdiv2DGetEdge( curr_edge, CV_PREV_AROUND_ORG );
temp_dst = cvSubdiv2DEdgeDst( temp_edge );
curr_org = cvSubdiv2DEdgeOrg( curr_edge );
curr_dst = cvSubdiv2DEdgeDst( curr_edge );
if( icvIsRightOf( temp_dst->pt, curr_edge ) > 0 &&
icvIsPtInCircle3( curr_org->pt, temp_dst->pt,
curr_dst->pt, curr_point->pt ) < 0 )
{
cvSubdiv2DSwapEdges( curr_edge );
curr_edge = cvSubdiv2DGetEdge( curr_edge, CV_PREV_AROUND_ORG );
}
else if( curr_org == first_point )
{
break;
}
else
{
curr_edge = cvSubdiv2DGetEdge( cvSubdiv2DNextEdge( curr_edge ),
CV_PREV_AROUND_LEFT );
}
}
break;
default:
assert( 0 );
CV_ERROR_FROM_STATUS( CV_NOTDEFINED_ERR );
}
point = curr_point;
__END__;
//icvSubdiv2DCheck( subdiv );
return point;
}
CV_IMPL void
cvInitSubdivDelaunay2D( CvSubdiv2D * subdiv, CvRect rect )
{
float big_coord = 3.f * MAX( rect.width, rect.height );
CvPoint2D32f ppA, ppB, ppC;
CvSubdiv2DPoint *pA, *pB, *pC;
CvSubdiv2DEdge edge_AB, edge_BC, edge_CA;
float rx = (float) rect.x;
float ry = (float) rect.y;
CV_FUNCNAME( "cvSubdivDelaunay2DInit" );
__BEGIN__;
if( !subdiv )
CV_ERROR( CV_StsNullPtr, "" );
cvClearSet( (CvSet *) (subdiv->edges) );
cvClearSet( (CvSet *) subdiv );
subdiv->quad_edges = 0;
subdiv->recent_edge = 0;
subdiv->is_geometry_valid = 0;
subdiv->topleft = cvPoint2D32f( rx, ry );
subdiv->bottomright = cvPoint2D32f( rx + rect.width, ry + rect.height );
ppA = cvPoint2D32f( rx + big_coord, ry );
ppB = cvPoint2D32f( rx, ry + big_coord );
ppC = cvPoint2D32f( rx - big_coord, ry - big_coord );
pA = cvSubdiv2DAddPoint( subdiv, ppA, 0 );
pB = cvSubdiv2DAddPoint( subdiv, ppB, 0 );
pC = cvSubdiv2DAddPoint( subdiv, ppC, 0 );
edge_AB = cvSubdiv2DMakeEdge( subdiv );
edge_BC = cvSubdiv2DMakeEdge( subdiv );
edge_CA = cvSubdiv2DMakeEdge( subdiv );
cvSubdiv2DSetEdgePoints( edge_AB, pA, pB );
cvSubdiv2DSetEdgePoints( edge_BC, pB, pC );
cvSubdiv2DSetEdgePoints( edge_CA, pC, pA );
cvSubdiv2DSplice( edge_AB, cvSubdiv2DSymEdge( edge_CA ));
cvSubdiv2DSplice( edge_BC, cvSubdiv2DSymEdge( edge_AB ));
cvSubdiv2DSplice( edge_CA, cvSubdiv2DSymEdge( edge_BC ));
subdiv->recent_edge = edge_AB;
__END__;
}
CV_IMPL void
cvClearSubdivVoronoi2D( CvSubdiv2D * subdiv )
{
int elem_size;
int i, total;
CvSeqReader reader;
CV_FUNCNAME( "cvClearVoronoi2D" );
__BEGIN__;
if( !subdiv )
CV_ERROR( CV_StsNullPtr, "" );
/* clear pointers to voronoi points */
total = subdiv->edges->total;
elem_size = subdiv->edges->elem_size;
cvStartReadSeq( (CvSeq *) (subdiv->edges), &reader, 0 );
for( i = 0; i < total; i++ )
{
CvQuadEdge2D *quadedge = (CvQuadEdge2D *) reader.ptr;
quadedge->pt[1] = quadedge->pt[3] = 0;
CV_NEXT_SEQ_ELEM( elem_size, reader );
}
/* remove voronoi points */
total = subdiv->total;
elem_size = subdiv->elem_size;
cvStartReadSeq( (CvSeq *) subdiv, &reader, 0 );
for( i = 0; i < total; i++ )
{
CvSubdiv2DPoint *pt = (CvSubdiv2DPoint *) reader.ptr;
/* check for virtual point. it is also check that the point exists */
if( pt->flags & CV_SUBDIV2D_VIRTUAL_POINT_FLAG )
{
cvSetRemoveByPtr( (CvSet*)subdiv, pt );
}
CV_NEXT_SEQ_ELEM( elem_size, reader );
}
subdiv->is_geometry_valid = 0;
__END__;
}
CV_IMPL void
cvCalcSubdivVoronoi2D( CvSubdiv2D * subdiv )
{
CvSeqReader reader;
int i, total, elem_size;
CV_FUNCNAME( "cvCalcSubdivVoronoi2D" );
__BEGIN__;
if( !subdiv )
CV_ERROR( CV_StsNullPtr, "" );
/* check if it is already calculated */
if( subdiv->is_geometry_valid )
EXIT;
total = subdiv->edges->total;
elem_size = subdiv->edges->elem_size;
cvClearSubdivVoronoi2D( subdiv );
cvStartReadSeq( (CvSeq *) (subdiv->edges), &reader, 0 );
if( total <= 3 )
EXIT;
/* skip first three edges (bounding triangle) */
for( i = 0; i < 3; i++ )
CV_NEXT_SEQ_ELEM( elem_size, reader );
/* loop through all quad-edges */
for( ; i < total; i++ )
{
CvQuadEdge2D *quadedge = (CvQuadEdge2D *) (reader.ptr);
if( CV_IS_SET_ELEM( quadedge ))
{
CvSubdiv2DEdge edge0 = (CvSubdiv2DEdge) quadedge, edge1, edge2;
double a0, b0, c0, a1, b1, c1;
CvPoint2D32f virt_point;
CvSubdiv2DPoint *voronoi_point;
if( !quadedge->pt[3] )
{
edge1 = cvSubdiv2DGetEdge( edge0, CV_NEXT_AROUND_LEFT );
edge2 = cvSubdiv2DGetEdge( edge1, CV_NEXT_AROUND_LEFT );
icvCreateCenterNormalLine( edge0, &a0, &b0, &c0 );
icvCreateCenterNormalLine( edge1, &a1, &b1, &c1 );
icvIntersectLines3( &a0, &b0, &c0, &a1, &b1, &c1, &virt_point );
if( fabs( virt_point.x ) < FLT_MAX * 0.5 &&
fabs( virt_point.y ) < FLT_MAX * 0.5 )
{
voronoi_point = cvSubdiv2DAddPoint( subdiv, virt_point, 1 );
quadedge->pt[3] =
((CvQuadEdge2D *) (edge1 & ~3))->pt[3 - (edge1 & 2)] =
((CvQuadEdge2D *) (edge2 & ~3))->pt[3 - (edge2 & 2)] = voronoi_point;
}
}
if( !quadedge->pt[1] )
{
edge1 = cvSubdiv2DGetEdge( edge0, CV_NEXT_AROUND_RIGHT );
edge2 = cvSubdiv2DGetEdge( edge1, CV_NEXT_AROUND_RIGHT );
icvCreateCenterNormalLine( edge0, &a0, &b0, &c0 );
icvCreateCenterNormalLine( edge1, &a1, &b1, &c1 );
icvIntersectLines3( &a0, &b0, &c0, &a1, &b1, &c1, &virt_point );
if( fabs( virt_point.x ) < FLT_MAX * 0.5 &&
fabs( virt_point.y ) < FLT_MAX * 0.5 )
{
voronoi_point = cvSubdiv2DAddPoint( subdiv, virt_point, 1 );
quadedge->pt[1] =
((CvQuadEdge2D *) (edge1 & ~3))->pt[1 + (edge1 & 2)] =
((CvQuadEdge2D *) (edge2 & ~3))->pt[1 + (edge2 & 2)] = voronoi_point;
}
}
}
CV_NEXT_SEQ_ELEM( elem_size, reader );
}
subdiv->is_geometry_valid = 1;
__END__;
}
static int
icvIsRightOf2( const CvPoint2D32f& pt, const CvPoint2D32f& org, const CvPoint2D32f& diff )
{
Cv32suf cw_area;
cw_area.f = (org.x - pt.x)*diff.y - (org.y - pt.y)*diff.x;
return (cw_area.i > 0)*2 - (cw_area.i*2 != 0);
}
CV_IMPL CvSubdiv2DPoint*
cvFindNearestPoint2D( CvSubdiv2D* subdiv, CvPoint2D32f pt )
{
CvSubdiv2DPoint* point = 0;
CvPoint2D32f start;
CvPoint2D32f diff;
CvSubdiv2DPointLocation loc;
CvSubdiv2DEdge edge;
int i;
CV_FUNCNAME("cvFindNearestPoint2D");
__BEGIN__;
if( !subdiv )
CV_ERROR( CV_StsNullPtr, "" );
if( !CV_IS_SUBDIV2D( subdiv ))
CV_ERROR( CV_StsNullPtr, "" );
if( !subdiv->is_geometry_valid )
cvCalcSubdivVoronoi2D( subdiv );
loc = cvSubdiv2DLocate( subdiv, pt, &edge, &point );
switch( loc )
{
case CV_PTLOC_ON_EDGE:
case CV_PTLOC_INSIDE:
break;
default:
EXIT;
}
point = 0;
start = cvSubdiv2DEdgeOrg( edge )->pt;
diff.x = pt.x - start.x;
diff.y = pt.y - start.y;
edge = cvSubdiv2DRotateEdge( edge, 1 );
for( i = 0; i < subdiv->total; i++ )
{
CvPoint2D32f t;
for(;;)
{
assert( cvSubdiv2DEdgeDst( edge ));
t = cvSubdiv2DEdgeDst( edge )->pt;
if( icvIsRightOf2( t, start, diff ) >= 0 )
break;
edge = cvSubdiv2DGetEdge( edge, CV_NEXT_AROUND_LEFT );
}
for(;;)
{
assert( cvSubdiv2DEdgeOrg( edge ));
t = cvSubdiv2DEdgeOrg( edge )->pt;
if( icvIsRightOf2( t, start, diff ) < 0 )
break;
edge = cvSubdiv2DGetEdge( edge, CV_PREV_AROUND_LEFT );
}
{
CvPoint2D32f tempDiff = cvSubdiv2DEdgeDst( edge )->pt;
t = cvSubdiv2DEdgeOrg( edge )->pt;
tempDiff.x -= t.x;
tempDiff.y -= t.y;
if( icvIsRightOf2( pt, t, tempDiff ) >= 0 )
{
point = cvSubdiv2DEdgeOrg( cvSubdiv2DRotateEdge( edge, 3 ));
break;
}
}
edge = cvSubdiv2DSymEdge( edge );
}
__END__;
return point;
}
/* Removed from the main interface */
#if 0
/* Adds new isolated quadedge to the subdivision */
OPENCVAPI CvSubdiv2DEdge cvSubdiv2DMakeEdge( CvSubdiv2D* subdiv );
/* Adds new isolated point to subdivision */
OPENCVAPI CvSubdiv2DPoint* cvSubdiv2DAddPoint( CvSubdiv2D* subdiv,
CvPoint2D32f pt, int is_virtual );
/* Does a splice operation for two quadedges */
OPENCVAPI void cvSubdiv2DSplice( CvSubdiv2DEdge edgeA, CvSubdiv2DEdge edgeB );
/* Assigns ending [non-virtual] points for given quadedge */
OPENCVAPI void cvSubdiv2DSetEdgePoints( CvSubdiv2DEdge edge,
CvSubdiv2DPoint* org_pt,
CvSubdiv2DPoint* dst_pt );
/* Removes quadedge from subdivision */
OPENCVAPI void cvSubdiv2DDeleteEdge( CvSubdiv2D* subdiv, CvSubdiv2DEdge edge );
/* Connects estination point of the first edge with origin point of the second edge */
OPENCVAPI CvSubdiv2DEdge cvSubdiv2DConnectEdges( CvSubdiv2D* subdiv,
CvSubdiv2DEdge edgeA,
CvSubdiv2DEdge edgeB );
/* Swaps diagonal in two connected Delaunay facets */
OPENCVAPI void cvSubdiv2DSwapEdges( CvSubdiv2DEdge edge );
#endif
/* End of file. */