// Copyright 2011 the V8 project authors. All rights reserved.
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following
// disclaimer in the documentation and/or other materials provided
// with the distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#ifndef V8_MIPS_REGEXP_MACRO_ASSEMBLER_MIPS_H_
#define V8_MIPS_REGEXP_MACRO_ASSEMBLER_MIPS_H_
#include "mips/assembler-mips.h"
#include "mips/assembler-mips-inl.h"
#include "macro-assembler.h"
#include "code.h"
#include "mips/macro-assembler-mips.h"
namespace v8 {
namespace internal {
#ifdef V8_INTERPRETED_REGEXP
class RegExpMacroAssemblerMIPS: public RegExpMacroAssembler {
public:
RegExpMacroAssemblerMIPS();
virtual ~RegExpMacroAssemblerMIPS();
};
#else // V8_INTERPRETED_REGEXP
class RegExpMacroAssemblerMIPS: public NativeRegExpMacroAssembler {
public:
RegExpMacroAssemblerMIPS(Mode mode, int registers_to_save);
virtual ~RegExpMacroAssemblerMIPS();
virtual int stack_limit_slack();
virtual void AdvanceCurrentPosition(int by);
virtual void AdvanceRegister(int reg, int by);
virtual void Backtrack();
virtual void Bind(Label* label);
virtual void CheckAtStart(Label* on_at_start);
virtual void CheckCharacter(uint32_t c, Label* on_equal);
virtual void CheckCharacterAfterAnd(uint32_t c,
uint32_t mask,
Label* on_equal);
virtual void CheckCharacterGT(uc16 limit, Label* on_greater);
virtual void CheckCharacterLT(uc16 limit, Label* on_less);
virtual void CheckCharacters(Vector<const uc16> str,
int cp_offset,
Label* on_failure,
bool check_end_of_string);
// A "greedy loop" is a loop that is both greedy and with a simple
// body. It has a particularly simple implementation.
virtual void CheckGreedyLoop(Label* on_tos_equals_current_position);
virtual void CheckNotAtStart(Label* on_not_at_start);
virtual void CheckNotBackReference(int start_reg, Label* on_no_match);
virtual void CheckNotBackReferenceIgnoreCase(int start_reg,
Label* on_no_match);
virtual void CheckNotRegistersEqual(int reg1, int reg2, Label* on_not_equal);
virtual void CheckNotCharacter(uint32_t c, Label* on_not_equal);
virtual void CheckNotCharacterAfterAnd(uint32_t c,
uint32_t mask,
Label* on_not_equal);
virtual void CheckNotCharacterAfterMinusAnd(uc16 c,
uc16 minus,
uc16 mask,
Label* on_not_equal);
// Checks whether the given offset from the current position is before
// the end of the string.
virtual void CheckPosition(int cp_offset, Label* on_outside_input);
virtual bool CheckSpecialCharacterClass(uc16 type,
Label* on_no_match);
virtual void Fail();
virtual Handle<HeapObject> GetCode(Handle<String> source);
virtual void GoTo(Label* label);
virtual void IfRegisterGE(int reg, int comparand, Label* if_ge);
virtual void IfRegisterLT(int reg, int comparand, Label* if_lt);
virtual void IfRegisterEqPos(int reg, Label* if_eq);
virtual IrregexpImplementation Implementation();
virtual void LoadCurrentCharacter(int cp_offset,
Label* on_end_of_input,
bool check_bounds = true,
int characters = 1);
virtual void PopCurrentPosition();
virtual void PopRegister(int register_index);
virtual void PushBacktrack(Label* label);
virtual void PushCurrentPosition();
virtual void PushRegister(int register_index,
StackCheckFlag check_stack_limit);
virtual void ReadCurrentPositionFromRegister(int reg);
virtual void ReadStackPointerFromRegister(int reg);
virtual void SetCurrentPositionFromEnd(int by);
virtual void SetRegister(int register_index, int to);
virtual void Succeed();
virtual void WriteCurrentPositionToRegister(int reg, int cp_offset);
virtual void ClearRegisters(int reg_from, int reg_to);
virtual void WriteStackPointerToRegister(int reg);
// Called from RegExp if the stack-guard is triggered.
// If the code object is relocated, the return address is fixed before
// returning.
static int CheckStackGuardState(Address* return_address,
Code* re_code,
Address re_frame);
private:
// Offsets from frame_pointer() of function parameters and stored registers.
static const int kFramePointer = 0;
// Above the frame pointer - Stored registers and stack passed parameters.
// Registers s0 to s7, fp, and ra.
static const int kStoredRegisters = kFramePointer;
// Return address (stored from link register, read into pc on return).
static const int kReturnAddress = kStoredRegisters + 9 * kPointerSize;
static const int kSecondaryReturnAddress = kReturnAddress + kPointerSize;
// Stack frame header.
static const int kStackFrameHeader = kReturnAddress + kPointerSize;
// Stack parameters placed by caller.
static const int kRegisterOutput = kStackFrameHeader + 20;
static const int kStackHighEnd = kRegisterOutput + kPointerSize;
static const int kDirectCall = kStackHighEnd + kPointerSize;
static const int kIsolate = kDirectCall + kPointerSize;
// Below the frame pointer.
// Register parameters stored by setup code.
static const int kInputEnd = kFramePointer - kPointerSize;
static const int kInputStart = kInputEnd - kPointerSize;
static const int kStartIndex = kInputStart - kPointerSize;
static const int kInputString = kStartIndex - kPointerSize;
// When adding local variables remember to push space for them in
// the frame in GetCode.
static const int kInputStartMinusOne = kInputString - kPointerSize;
static const int kAtStart = kInputStartMinusOne - kPointerSize;
// First register address. Following registers are below it on the stack.
static const int kRegisterZero = kAtStart - kPointerSize;
// Initial size of code buffer.
static const size_t kRegExpCodeSize = 1024;
// Load a number of characters at the given offset from the
// current position, into the current-character register.
void LoadCurrentCharacterUnchecked(int cp_offset, int character_count);
// Check whether preemption has been requested.
void CheckPreemption();
// Check whether we are exceeding the stack limit on the backtrack stack.
void CheckStackLimit();
// Generate a call to CheckStackGuardState.
void CallCheckStackGuardState(Register scratch);
// The ebp-relative location of a regexp register.
MemOperand register_location(int register_index);
// Register holding the current input position as negative offset from
// the end of the string.
inline Register current_input_offset() { return t2; }
// The register containing the current character after LoadCurrentCharacter.
inline Register current_character() { return t3; }
// Register holding address of the end of the input string.
inline Register end_of_input_address() { return t6; }
// Register holding the frame address. Local variables, parameters and
// regexp registers are addressed relative to this.
inline Register frame_pointer() { return fp; }
// The register containing the backtrack stack top. Provides a meaningful
// name to the register.
inline Register backtrack_stackpointer() { return t4; }
// Register holding pointer to the current code object.
inline Register code_pointer() { return t1; }
// Byte size of chars in the string to match (decided by the Mode argument).
inline int char_size() { return static_cast<int>(mode_); }
// Equivalent to a conditional branch to the label, unless the label
// is NULL, in which case it is a conditional Backtrack.
void BranchOrBacktrack(Label* to,
Condition condition,
Register rs,
const Operand& rt);
// Call and return internally in the generated code in a way that
// is GC-safe (i.e., doesn't leave absolute code addresses on the stack)
inline void SafeCall(Label* to,
Condition cond,
Register rs,
const Operand& rt);
inline void SafeReturn();
inline void SafeCallTarget(Label* name);
// Pushes the value of a register on the backtrack stack. Decrements the
// stack pointer by a word size and stores the register's value there.
inline void Push(Register source);
// Pops a value from the backtrack stack. Reads the word at the stack pointer
// and increments it by a word size.
inline void Pop(Register target);
// Calls a C function and cleans up the frame alignment done by
// by FrameAlign. The called function *is* allowed to trigger a garbage
// collection, but may not take more than four arguments (no arguments
// passed on the stack), and the first argument will be a pointer to the
// return address.
inline void CallCFunctionUsingStub(ExternalReference function,
int num_arguments);
MacroAssembler* masm_;
// Which mode to generate code for (ASCII or UC16).
Mode mode_;
// One greater than maximal register index actually used.
int num_registers_;
// Number of registers to output at the end (the saved registers
// are always 0..num_saved_registers_-1).
int num_saved_registers_;
// Labels used internally.
Label entry_label_;
Label start_label_;
Label success_label_;
Label backtrack_label_;
Label exit_label_;
Label check_preempt_label_;
Label stack_overflow_label_;
Label internal_failure_label_;
};
#endif // V8_INTERPRETED_REGEXP
}} // namespace v8::internal
#endif // V8_MIPS_REGEXP_MACRO_ASSEMBLER_MIPS_H_