/* * Stack-less Just-In-Time compiler * * Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, are * permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this list of * conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, this list * of conditions and the following disclaimer in the documentation and/or other materials * provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _SLJIT_CONFIG_INTERNAL_H_ #define _SLJIT_CONFIG_INTERNAL_H_ /* SLJIT defines the following architecture dependent types and macros: Types: sljit_sb, sljit_ub : signed and unsigned 8 bit byte sljit_sh, sljit_uh : signed and unsigned 16 bit half-word (short) type sljit_si, sljit_ui : signed and unsigned 32 bit integer type sljit_sw, sljit_uw : signed and unsigned machine word, enough to store a pointer sljit_p : unsgined pointer value (usually the same as sljit_uw, but some 64 bit ABIs may use 32 bit pointers) sljit_s : single precision floating point value sljit_d : double precision floating point value Macros for feature detection (boolean): SLJIT_32BIT_ARCHITECTURE : 32 bit architecture SLJIT_64BIT_ARCHITECTURE : 64 bit architecture SLJIT_LITTLE_ENDIAN : little endian architecture SLJIT_BIG_ENDIAN : big endian architecture SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!) SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information Constants: SLJIT_NUMBER_OF_REGISTERS : number of available registers SLJIT_NUMBER_OF_SCRATCH_REGISTERS : number of available scratch registers SLJIT_NUMBER_OF_SAVED_REGISTERS : number of available saved registers SLJIT_NUMBER_OF_FLOAT_REGISTERS : number of available floating point registers SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS : number of available floating point scratch registers SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS : number of available floating point saved registers SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index SLJIT_DOUBLE_SHIFT : the shift required to apply when accessing a double precision floating point array by index SLJIT_SINGLE_SHIFT : the shift required to apply when accessing a single precision floating point array by index SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address Other macros: SLJIT_CALL : C calling convention define for both calling JIT form C and C callbacks for JIT SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper) */ #if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ || (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ || (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ || (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ || (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ || (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ || (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)) #error "An architecture must be selected" #endif /* Sanity check. */ #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ + (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ + (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ + (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ + (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ + (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ + (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ + (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ + (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ + (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ + (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ + (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ + (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ + (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2 #error "Multiple architectures are selected" #endif /* Auto select option (requires compiler support) */ #if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) #ifndef _WIN32 #if defined(__i386__) || defined(__i386) #define SLJIT_CONFIG_X86_32 1 #elif defined(__x86_64__) #define SLJIT_CONFIG_X86_64 1 #elif defined(__arm__) || defined(__ARM__) #ifdef __thumb2__ #define SLJIT_CONFIG_ARM_THUMB2 1 #elif defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7R__) #define SLJIT_CONFIG_ARM_V7 1 #else #define SLJIT_CONFIG_ARM_V5 1 #endif #elif defined (__aarch64__) #define SLJIT_CONFIG_ARM_64 1 #elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__)) #define SLJIT_CONFIG_PPC_64 1 #elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER) #define SLJIT_CONFIG_PPC_32 1 #elif defined(__mips__) && !defined(_LP64) #define SLJIT_CONFIG_MIPS_32 1 #elif defined(__mips64) #define SLJIT_CONFIG_MIPS_64 1 #elif defined(__sparc__) || defined(__sparc) #define SLJIT_CONFIG_SPARC_32 1 #elif defined(__tilegx__) #define SLJIT_CONFIG_TILEGX 1 #else /* Unsupported architecture */ #define SLJIT_CONFIG_UNSUPPORTED 1 #endif #else /* !_WIN32 */ #if defined(_M_X64) || defined(__x86_64__) #define SLJIT_CONFIG_X86_64 1 #elif defined(_ARM_) #define SLJIT_CONFIG_ARM_V5 1 #else #define SLJIT_CONFIG_X86_32 1 #endif #endif /* !WIN32 */ #endif /* SLJIT_CONFIG_AUTO */ #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) #undef SLJIT_EXECUTABLE_ALLOCATOR #endif #if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) #define SLJIT_CONFIG_ARM_32 1 #endif #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) #define SLJIT_CONFIG_X86 1 #elif (defined SLJIT_CONFIG_ARM_32 && SLJIT_CONFIG_ARM_32) || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) #define SLJIT_CONFIG_ARM 1 #elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) #define SLJIT_CONFIG_PPC 1 #elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) #define SLJIT_CONFIG_MIPS 1 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) || (defined SLJIT_CONFIG_SPARC_64 && SLJIT_CONFIG_SPARC_64) #define SLJIT_CONFIG_SPARC 1 #endif #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) #define SLJIT_NUMBER_OF_REGISTERS 10 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 7 #elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) #ifndef _WIN64 #define SLJIT_NUMBER_OF_REGISTERS 12 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 6 #else #define SLJIT_NUMBER_OF_REGISTERS 12 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 #endif /* _WIN64 */ #elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) #define SLJIT_NUMBER_OF_REGISTERS 11 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 #elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) #define SLJIT_NUMBER_OF_REGISTERS 11 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 7 #elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) #define SLJIT_NUMBER_OF_REGISTERS 23 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 10 #elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) #define SLJIT_NUMBER_OF_REGISTERS 22 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 17 #elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS) #define SLJIT_NUMBER_OF_REGISTERS 17 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 #elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC) #define SLJIT_NUMBER_OF_REGISTERS 18 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 14 #elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) #define SLJIT_NUMBER_OF_REGISTERS 0 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 0 #endif #define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \ (SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS) #define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64) #define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1 #else #define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0 #endif #define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \ (SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS) #if !(defined SLJIT_STD_MACROS_DEFINED && SLJIT_STD_MACROS_DEFINED) /* These libraries are needed for the macros below. */ #include <stdlib.h> #include <string.h> #endif /* STD_MACROS_DEFINED */ /* General macros: Note: SLJIT is designed to be independent from them as possible. In release mode (SLJIT_DEBUG is not defined) only the following macros are needed: */ #ifndef SLJIT_MALLOC #define SLJIT_MALLOC(size) malloc(size) #endif #ifndef SLJIT_FREE #define SLJIT_FREE(ptr) free(ptr) #endif #ifndef SLJIT_MEMMOVE #define SLJIT_MEMMOVE(dest, src, len) memmove(dest, src, len) #endif #ifndef SLJIT_ZEROMEM #define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len) #endif #if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) #if defined(__GNUC__) && (__GNUC__ >= 3) #define SLJIT_LIKELY(x) __builtin_expect((x), 1) #define SLJIT_UNLIKELY(x) __builtin_expect((x), 0) #else #define SLJIT_LIKELY(x) (x) #define SLJIT_UNLIKELY(x) (x) #endif #endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */ #ifndef SLJIT_INLINE /* Inline functions. Some old compilers do not support them. */ #if defined(__SUNPRO_C) && __SUNPRO_C <= 0x510 #define SLJIT_INLINE #else #define SLJIT_INLINE __inline #endif #endif /* !SLJIT_INLINE */ #ifndef SLJIT_CONST /* Const variables. */ #define SLJIT_CONST const #endif #ifndef SLJIT_UNUSED_ARG /* Unused arguments. */ #define SLJIT_UNUSED_ARG(arg) (void)arg #endif #if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) /* Static ABI functions. For all-in-one programs. */ #if defined(__GNUC__) /* Disable unused warnings in gcc. */ #define SLJIT_API_FUNC_ATTRIBUTE static __attribute__((unused)) #else #define SLJIT_API_FUNC_ATTRIBUTE static #endif #else #define SLJIT_API_FUNC_ATTRIBUTE #endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */ #ifndef SLJIT_CACHE_FLUSH #if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86) /* Not required to implement on archs with unified caches. */ #define SLJIT_CACHE_FLUSH(from, to) #elif defined __APPLE__ /* Supported by all macs since Mac OS 10.5. However, it does not work on non-jailbroken iOS devices, although the compilation is successful. */ #define SLJIT_CACHE_FLUSH(from, to) \ sys_icache_invalidate((char*)(from), (char*)(to) - (char*)(from)) #elif defined __ANDROID__ /* Android lacks __clear_cache; instead, cacheflush should be used. */ #define SLJIT_CACHE_FLUSH(from, to) \ cacheflush((long)(from), (long)(to), 0) #elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) /* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */ #define SLJIT_CACHE_FLUSH(from, to) \ ppc_cache_flush((from), (to)) #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) /* The __clear_cache() implementation of GCC is a dummy function on Sparc. */ #define SLJIT_CACHE_FLUSH(from, to) \ sparc_cache_flush((from), (to)) #else /* Calls __ARM_NR_cacheflush on ARM-Linux. */ #define SLJIT_CACHE_FLUSH(from, to) \ __clear_cache((char*)(from), (char*)(to)) #endif #endif /* !SLJIT_CACHE_FLUSH */ /* 8 bit byte type. */ typedef unsigned char sljit_ub; typedef signed char sljit_sb; /* 16 bit half-word type. */ typedef unsigned short int sljit_uh; typedef signed short int sljit_sh; /* 32 bit integer type. */ typedef unsigned int sljit_ui; typedef signed int sljit_si; /* Machine word type. Can encapsulate a pointer. 32 bit for 32 bit machines. 64 bit for 64 bit machines. */ #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) /* Just to have something. */ #define SLJIT_WORD_SHIFT 0 typedef unsigned long int sljit_uw; typedef long int sljit_sw; #elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ && !(defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ && !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ && !(defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ && !(defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) #define SLJIT_32BIT_ARCHITECTURE 1 #define SLJIT_WORD_SHIFT 2 typedef unsigned int sljit_uw; typedef int sljit_sw; #else #define SLJIT_64BIT_ARCHITECTURE 1 #define SLJIT_WORD_SHIFT 3 #ifdef _WIN32 typedef unsigned __int64 sljit_uw; typedef __int64 sljit_sw; #else typedef unsigned long int sljit_uw; typedef long int sljit_sw; #endif #endif typedef sljit_uw sljit_p; /* Floating point types. */ typedef float sljit_s; typedef double sljit_d; /* Shift for pointer sized data. */ #define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT /* Shift for double precision sized data. */ #define SLJIT_DOUBLE_SHIFT 3 #define SLJIT_SINGLE_SHIFT 2 #ifndef SLJIT_W /* Defining long constants. */ #if (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE) #define SLJIT_W(w) (w##ll) #else #define SLJIT_W(w) (w) #endif #endif /* !SLJIT_W */ #ifndef SLJIT_CALL /* ABI (Application Binary Interface) types. */ #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) #if defined(__GNUC__) && !defined(__APPLE__) #define SLJIT_CALL __attribute__ ((fastcall)) #define SLJIT_X86_32_FASTCALL 1 #elif defined(_MSC_VER) #define SLJIT_CALL __fastcall #define SLJIT_X86_32_FASTCALL 1 #elif defined(__BORLANDC__) #define SLJIT_CALL __msfastcall #define SLJIT_X86_32_FASTCALL 1 #else /* Unknown compiler. */ /* The cdecl attribute is the default. */ #define SLJIT_CALL #endif #else /* Non x86-32 architectures. */ #define SLJIT_CALL #endif /* SLJIT_CONFIG_X86_32 */ #endif /* !SLJIT_CALL */ #if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) /* These macros are useful for the applications. */ #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) #ifdef __LITTLE_ENDIAN__ #define SLJIT_LITTLE_ENDIAN 1 #else #define SLJIT_BIG_ENDIAN 1 #endif #elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) #ifdef __MIPSEL__ #define SLJIT_LITTLE_ENDIAN 1 #else #define SLJIT_BIG_ENDIAN 1 #endif #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) #define SLJIT_BIG_ENDIAN 1 #else #define SLJIT_LITTLE_ENDIAN 1 #endif #endif /* !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) */ /* Sanity check. */ #if (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) #error "Exactly one endianness must be selected" #endif #if !(defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && !(defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) #error "Exactly one endianness must be selected" #endif #ifndef SLJIT_INDIRECT_CALL #if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN)) \ || ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX) /* It seems certain ppc compilers use an indirect addressing for functions which makes things complicated. */ #define SLJIT_INDIRECT_CALL 1 #endif #endif /* SLJIT_INDIRECT_CALL */ #ifndef SLJIT_RETURN_ADDRESS_OFFSET #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) #define SLJIT_RETURN_ADDRESS_OFFSET 8 #else #define SLJIT_RETURN_ADDRESS_OFFSET 0 #endif #endif /* SLJIT_RETURN_ADDRESS_OFFSET */ #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) /* Auto detect SSE2 support using CPUID. On 64 bit x86 cpus, sse2 must be present. */ #define SLJIT_DETECT_SSE2 1 #endif #ifndef SLJIT_UNALIGNED #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) #define SLJIT_UNALIGNED 1 #endif #endif /* !SLJIT_UNALIGNED */ #if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR) SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size); SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr); SLJIT_API_FUNC_ATTRIBUTE void sljit_free_unused_memory_exec(void); #define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size) #define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr) #endif #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) #include <stdio.h> #endif #if (defined SLJIT_DEBUG && SLJIT_DEBUG) #if !defined(SLJIT_ASSERT) || !defined(SLJIT_ASSERT_STOP) /* SLJIT_HALT_PROCESS must halt the process. */ #ifndef SLJIT_HALT_PROCESS #include <stdlib.h> #define SLJIT_HALT_PROCESS() \ abort(); #endif /* !SLJIT_HALT_PROCESS */ #include <stdio.h> #endif /* !SLJIT_ASSERT || !SLJIT_ASSERT_STOP */ /* Feel free to redefine these two macros. */ #ifndef SLJIT_ASSERT #define SLJIT_ASSERT(x) \ do { \ if (SLJIT_UNLIKELY(!(x))) { \ printf("Assertion failed at " __FILE__ ":%d\n", __LINE__); \ SLJIT_HALT_PROCESS(); \ } \ } while (0) #endif /* !SLJIT_ASSERT */ #ifndef SLJIT_ASSERT_STOP #define SLJIT_ASSERT_STOP() \ do { \ printf("Should never been reached " __FILE__ ":%d\n", __LINE__); \ SLJIT_HALT_PROCESS(); \ } while (0) #endif /* !SLJIT_ASSERT_STOP */ #else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ /* Forcing empty, but valid statements. */ #undef SLJIT_ASSERT #undef SLJIT_ASSERT_STOP #define SLJIT_ASSERT(x) \ do { } while (0) #define SLJIT_ASSERT_STOP() \ do { } while (0) #endif /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ #ifndef SLJIT_COMPILE_ASSERT /* Should be improved eventually. */ #define SLJIT_COMPILE_ASSERT(x, description) \ SLJIT_ASSERT(x) #endif /* !SLJIT_COMPILE_ASSERT */ #endif