/*
* Copyright (C) 2012 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "asm_support_mips.S"
#include "arch/quick_alloc_entrypoints.S"
.set noreorder
.balign 4
/* Deliver the given exception */
.extern artDeliverExceptionFromCode
/* Deliver an exception pending on a thread */
.extern artDeliverPendingExceptionFromCode
#define ARG_SLOT_SIZE 32 // space for a0-a3 plus 4 more words
/*
* Macro that sets up the callee save frame to conform with
* Runtime::CreateCalleeSaveMethod(kSaveAll)
* Callee-save: $s0-$s8 + $gp + $ra, 11 total + 1 word for Method*
* Clobbers $t0 and $sp
* Allocates ARG_SLOT_SIZE bytes at the bottom of the stack for arg slots.
* Reserves FRAME_SIZE_SAVE_ALL_CALLEE_SAVE + ARG_SLOT_SIZE bytes on the stack
*/
.macro SETUP_SAVE_ALL_CALLEE_SAVE_FRAME
addiu $sp, $sp, -96
.cfi_adjust_cfa_offset 96
// Ugly compile-time check, but we only have the preprocessor.
#if (FRAME_SIZE_SAVE_ALL_CALLEE_SAVE != 96)
#error "SAVE_ALL_CALLEE_SAVE_FRAME(MIPS) size not as expected."
#endif
sw $ra, 92($sp)
.cfi_rel_offset 31, 92
sw $s8, 88($sp)
.cfi_rel_offset 30, 88
sw $gp, 84($sp)
.cfi_rel_offset 28, 84
sw $s7, 80($sp)
.cfi_rel_offset 23, 80
sw $s6, 76($sp)
.cfi_rel_offset 22, 76
sw $s5, 72($sp)
.cfi_rel_offset 21, 72
sw $s4, 68($sp)
.cfi_rel_offset 20, 68
sw $s3, 64($sp)
.cfi_rel_offset 19, 64
sw $s2, 60($sp)
.cfi_rel_offset 18, 60
sw $s1, 56($sp)
.cfi_rel_offset 17, 56
sw $s0, 52($sp)
.cfi_rel_offset 16, 52
SDu $f30, $f31, 44, $sp, $t1
SDu $f28, $f29, 36, $sp, $t1
SDu $f26, $f27, 28, $sp, $t1
SDu $f24, $f25, 20, $sp, $t1
SDu $f22, $f23, 12, $sp, $t1
SDu $f20, $f21, 4, $sp, $t1
# 1 word for holding Method*
lw $t0, %got(_ZN3art7Runtime9instance_E)($gp)
lw $t0, 0($t0)
THIS_LOAD_REQUIRES_READ_BARRIER
lw $t0, RUNTIME_SAVE_ALL_CALLEE_SAVE_FRAME_OFFSET($t0)
sw $t0, 0($sp) # Place Method* at bottom of stack.
sw $sp, THREAD_TOP_QUICK_FRAME_OFFSET(rSELF) # Place sp in Thread::Current()->top_quick_frame.
addiu $sp, $sp, -ARG_SLOT_SIZE # reserve argument slots on the stack
.cfi_adjust_cfa_offset ARG_SLOT_SIZE
.endm
/*
* Macro that sets up the callee save frame to conform with
* Runtime::CreateCalleeSaveMethod(kRefsOnly). Restoration assumes non-moving GC.
* Does not include rSUSPEND or rSELF
* callee-save: $s2-$s8 + $gp + $ra, 9 total + 2 words padding + 1 word to hold Method*
* Clobbers $t0 and $sp
* Allocates ARG_SLOT_SIZE bytes at the bottom of the stack for arg slots.
* Reserves FRAME_SIZE_REFS_ONLY_CALLEE_SAVE + ARG_SLOT_SIZE bytes on the stack
*/
.macro SETUP_REFS_ONLY_CALLEE_SAVE_FRAME
addiu $sp, $sp, -48
.cfi_adjust_cfa_offset 48
// Ugly compile-time check, but we only have the preprocessor.
#if (FRAME_SIZE_REFS_ONLY_CALLEE_SAVE != 48)
#error "REFS_ONLY_CALLEE_SAVE_FRAME(MIPS) size not as expected."
#endif
sw $ra, 44($sp)
.cfi_rel_offset 31, 44
sw $s8, 40($sp)
.cfi_rel_offset 30, 40
sw $gp, 36($sp)
.cfi_rel_offset 28, 36
sw $s7, 32($sp)
.cfi_rel_offset 23, 32
sw $s6, 28($sp)
.cfi_rel_offset 22, 28
sw $s5, 24($sp)
.cfi_rel_offset 21, 24
sw $s4, 20($sp)
.cfi_rel_offset 20, 20
sw $s3, 16($sp)
.cfi_rel_offset 19, 16
sw $s2, 12($sp)
.cfi_rel_offset 18, 12
# 2 words for alignment and bottom word will hold Method*
lw $t0, %got(_ZN3art7Runtime9instance_E)($gp)
lw $t0, 0($t0)
THIS_LOAD_REQUIRES_READ_BARRIER
lw $t0, RUNTIME_REFS_ONLY_CALLEE_SAVE_FRAME_OFFSET($t0)
sw $t0, 0($sp) # Place Method* at bottom of stack.
sw $sp, THREAD_TOP_QUICK_FRAME_OFFSET(rSELF) # Place sp in Thread::Current()->top_quick_frame.
addiu $sp, $sp, -ARG_SLOT_SIZE # reserve argument slots on the stack
.cfi_adjust_cfa_offset ARG_SLOT_SIZE
.endm
.macro RESTORE_REFS_ONLY_CALLEE_SAVE_FRAME
addiu $sp, $sp, ARG_SLOT_SIZE # remove argument slots on the stack
.cfi_adjust_cfa_offset -ARG_SLOT_SIZE
lw $ra, 44($sp)
.cfi_restore 31
lw $s8, 40($sp)
.cfi_restore 30
lw $gp, 36($sp)
.cfi_restore 28
lw $s7, 32($sp)
.cfi_restore 23
lw $s6, 28($sp)
.cfi_restore 22
lw $s5, 24($sp)
.cfi_restore 21
lw $s4, 20($sp)
.cfi_restore 20
lw $s3, 16($sp)
.cfi_restore 19
lw $s2, 12($sp)
.cfi_restore 18
addiu $sp, $sp, 48
.cfi_adjust_cfa_offset -48
.endm
.macro RESTORE_REFS_ONLY_CALLEE_SAVE_FRAME_AND_RETURN
RESTORE_REFS_ONLY_CALLEE_SAVE_FRAME
jalr $zero, $ra
nop
.endm
/*
* Macro that sets up the callee save frame to conform with
* Runtime::CreateCalleeSaveMethod(kRefsAndArgs).
* callee-save: $a1-$a3, $s2-$s8 + $gp + $ra, 12 total + 3 words padding + method*
*/
.macro SETUP_REFS_AND_ARGS_CALLEE_SAVE_FRAME_REGISTERS_ONLY
addiu $sp, $sp, -64
.cfi_adjust_cfa_offset 64
// Ugly compile-time check, but we only have the preprocessor.
#if (FRAME_SIZE_REFS_AND_ARGS_CALLEE_SAVE != 64)
#error "REFS_AND_ARGS_CALLEE_SAVE_FRAME(MIPS) size not as expected."
#endif
sw $ra, 60($sp)
.cfi_rel_offset 31, 60
sw $s8, 56($sp)
.cfi_rel_offset 30, 56
sw $gp, 52($sp)
.cfi_rel_offset 28, 52
sw $s7, 48($sp)
.cfi_rel_offset 23, 48
sw $s6, 44($sp)
.cfi_rel_offset 22, 44
sw $s5, 40($sp)
.cfi_rel_offset 21, 40
sw $s4, 36($sp)
.cfi_rel_offset 20, 36
sw $s3, 32($sp)
.cfi_rel_offset 19, 32
sw $s2, 28($sp)
.cfi_rel_offset 18, 28
sw $a3, 24($sp)
.cfi_rel_offset 7, 24
sw $a2, 20($sp)
.cfi_rel_offset 6, 20
sw $a1, 16($sp)
.cfi_rel_offset 5, 16
# bottom will hold Method*
.endm
/*
* Macro that sets up the callee save frame to conform with
* Runtime::CreateCalleeSaveMethod(kRefsAndArgs). Restoration assumes non-moving GC.
* callee-save: $a1-$a3, $s2-$s8 + $gp + $ra, 12 total + 3 words padding + method*
* Clobbers $t0 and $sp
* Allocates ARG_SLOT_SIZE bytes at the bottom of the stack for arg slots.
* Reserves FRAME_SIZE_REFS_AND_ARGS_CALLEE_SAVE + ARG_SLOT_SIZE bytes on the stack
*/
.macro SETUP_REFS_AND_ARGS_CALLEE_SAVE_FRAME
SETUP_REFS_AND_ARGS_CALLEE_SAVE_FRAME_REGISTERS_ONLY
lw $t0, %got(_ZN3art7Runtime9instance_E)($gp)
lw $t0, 0($t0)
THIS_LOAD_REQUIRES_READ_BARRIER
lw $t0, RUNTIME_REFS_AND_ARGS_CALLEE_SAVE_FRAME_OFFSET($t0)
sw $t0, 0($sp) # Place Method* at bottom of stack.
sw $sp, THREAD_TOP_QUICK_FRAME_OFFSET(rSELF) # Place sp in Thread::Current()->top_quick_frame.
addiu $sp, $sp, -ARG_SLOT_SIZE # reserve argument slots on the stack
.cfi_adjust_cfa_offset ARG_SLOT_SIZE
.endm
/*
* Macro that sets up the callee save frame to conform with
* Runtime::CreateCalleeSaveMethod(kRefsAndArgs). Restoration assumes non-moving GC.
* callee-save: $a1-$a3, $s2-$s8 + $gp + $ra, 12 total + 3 words padding + method*
* Clobbers $sp
* Use $a0 as the Method* and loads it into bottom of stack.
* Allocates ARG_SLOT_SIZE bytes at the bottom of the stack for arg slots.
* Reserves FRAME_SIZE_REFS_AND_ARGS_CALLEE_SAVE + ARG_SLOT_SIZE bytes on the stack
*/
.macro SETUP_REFS_AND_ARGS_CALLEE_SAVE_FRAME_WITH_METHOD_IN_A0
SETUP_REFS_AND_ARGS_CALLEE_SAVE_FRAME_REGISTERS_ONLY
sw $a0, 0($sp) # Place Method* at bottom of stack.
sw $sp, THREAD_TOP_QUICK_FRAME_OFFSET(rSELF) # Place sp in Thread::Current()->top_quick_frame.
addiu $sp, $sp, -ARG_SLOT_SIZE # reserve argument slots on the stack
.cfi_adjust_cfa_offset ARG_SLOT_SIZE
.endm
.macro RESTORE_REFS_AND_ARGS_CALLEE_SAVE_FRAME
addiu $sp, $sp, ARG_SLOT_SIZE # remove argument slots on the stack
.cfi_adjust_cfa_offset -ARG_SLOT_SIZE
lw $ra, 60($sp)
.cfi_restore 31
lw $s8, 56($sp)
.cfi_restore 30
lw $gp, 52($sp)
.cfi_restore 28
lw $s7, 48($sp)
.cfi_restore 23
lw $s6, 44($sp)
.cfi_restore 22
lw $s5, 40($sp)
.cfi_restore 21
lw $s4, 36($sp)
.cfi_restore 20
lw $s3, 32($sp)
.cfi_restore 19
lw $s2, 28($sp)
.cfi_restore 18
lw $a3, 24($sp)
.cfi_restore 7
lw $a2, 20($sp)
.cfi_restore 6
lw $a1, 16($sp)
.cfi_restore 5
addiu $sp, $sp, 64 # pop frame
.cfi_adjust_cfa_offset -64
.endm
/*
* Macro that set calls through to artDeliverPendingExceptionFromCode, where the pending
* exception is Thread::Current()->exception_
*/
.macro DELIVER_PENDING_EXCEPTION
SETUP_SAVE_ALL_CALLEE_SAVE_FRAME # save callee saves for throw
la $t9, artDeliverPendingExceptionFromCode
jalr $zero, $t9 # artDeliverPendingExceptionFromCode(Thread*)
move $a0, rSELF # pass Thread::Current
.endm
.macro RETURN_IF_NO_EXCEPTION
lw $t0, THREAD_EXCEPTION_OFFSET(rSELF) # load Thread::Current()->exception_
RESTORE_REFS_ONLY_CALLEE_SAVE_FRAME
bnez $t0, 1f # success if no exception is pending
nop
jalr $zero, $ra
nop
1:
DELIVER_PENDING_EXCEPTION
.endm
.macro RETURN_IF_ZERO
RESTORE_REFS_ONLY_CALLEE_SAVE_FRAME
bnez $v0, 1f # success?
nop
jalr $zero, $ra # return on success
nop
1:
DELIVER_PENDING_EXCEPTION
.endm
.macro RETURN_IF_RESULT_IS_NON_ZERO_OR_DELIVER
RESTORE_REFS_ONLY_CALLEE_SAVE_FRAME
beqz $v0, 1f # success?
nop
jalr $zero, $ra # return on success
nop
1:
DELIVER_PENDING_EXCEPTION
.endm
/*
* On entry $a0 is uint32_t* gprs_ and $a1 is uint32_t* fprs_
* FIXME: just guessing about the shape of the jmpbuf. Where will pc be?
*/
ENTRY art_quick_do_long_jump
LDu $f0, $f1, 0*8, $a1, $t1
LDu $f2, $f3, 1*8, $a1, $t1
LDu $f4, $f5, 2*8, $a1, $t1
LDu $f6, $f7, 3*8, $a1, $t1
LDu $f8, $f9, 4*8, $a1, $t1
LDu $f10, $f11, 5*8, $a1, $t1
LDu $f12, $f13, 6*8, $a1, $t1
LDu $f14, $f15, 7*8, $a1, $t1
LDu $f16, $f17, 8*8, $a1, $t1
LDu $f18, $f19, 9*8, $a1, $t1
LDu $f20, $f21, 10*8, $a1, $t1
LDu $f22, $f23, 11*8, $a1, $t1
LDu $f24, $f25, 12*8, $a1, $t1
LDu $f26, $f27, 13*8, $a1, $t1
LDu $f28, $f29, 14*8, $a1, $t1
LDu $f30, $f31, 15*8, $a1, $t1
.set push
.set nomacro
.set noat
lw $at, 4($a0)
.set pop
lw $v0, 8($a0)
lw $v1, 12($a0)
lw $a1, 20($a0)
lw $a2, 24($a0)
lw $a3, 28($a0)
lw $t0, 32($a0)
lw $t1, 36($a0)
lw $t2, 40($a0)
lw $t3, 44($a0)
lw $t4, 48($a0)
lw $t5, 52($a0)
lw $t6, 56($a0)
lw $t7, 60($a0)
lw $s0, 64($a0)
lw $s1, 68($a0)
lw $s2, 72($a0)
lw $s3, 76($a0)
lw $s4, 80($a0)
lw $s5, 84($a0)
lw $s6, 88($a0)
lw $s7, 92($a0)
lw $t8, 96($a0)
lw $t9, 100($a0)
lw $gp, 112($a0)
lw $sp, 116($a0)
lw $fp, 120($a0)
lw $ra, 124($a0)
lw $a0, 16($a0)
move $v0, $zero # clear result registers r0 and r1
jalr $zero, $ra # do long jump
move $v1, $zero
END art_quick_do_long_jump
/*
* Called by managed code, saves most registers (forms basis of long jump context) and passes
* the bottom of the stack. artDeliverExceptionFromCode will place the callee save Method* at
* the bottom of the thread. On entry a0 holds Throwable*
*/
ENTRY art_quick_deliver_exception
SETUP_SAVE_ALL_CALLEE_SAVE_FRAME
la $t9, artDeliverExceptionFromCode
jalr $zero, $t9 # artDeliverExceptionFromCode(Throwable*, Thread*)
move $a1, rSELF # pass Thread::Current
END art_quick_deliver_exception
/*
* Called by managed code to create and deliver a NullPointerException
*/
.extern artThrowNullPointerExceptionFromCode
ENTRY art_quick_throw_null_pointer_exception
SETUP_SAVE_ALL_CALLEE_SAVE_FRAME
la $t9, artThrowNullPointerExceptionFromCode
jalr $zero, $t9 # artThrowNullPointerExceptionFromCode(Thread*)
move $a0, rSELF # pass Thread::Current
END art_quick_throw_null_pointer_exception
/*
* Called by managed code to create and deliver an ArithmeticException
*/
.extern artThrowDivZeroFromCode
ENTRY art_quick_throw_div_zero
SETUP_SAVE_ALL_CALLEE_SAVE_FRAME
la $t9, artThrowDivZeroFromCode
jalr $zero, $t9 # artThrowDivZeroFromCode(Thread*)
move $a0, rSELF # pass Thread::Current
END art_quick_throw_div_zero
/*
* Called by managed code to create and deliver an ArrayIndexOutOfBoundsException
*/
.extern artThrowArrayBoundsFromCode
ENTRY art_quick_throw_array_bounds
SETUP_SAVE_ALL_CALLEE_SAVE_FRAME
la $t9, artThrowArrayBoundsFromCode
jalr $zero, $t9 # artThrowArrayBoundsFromCode(index, limit, Thread*)
move $a2, rSELF # pass Thread::Current
END art_quick_throw_array_bounds
/*
* Called by managed code to create and deliver a StackOverflowError.
*/
.extern artThrowStackOverflowFromCode
ENTRY art_quick_throw_stack_overflow
SETUP_SAVE_ALL_CALLEE_SAVE_FRAME
la $t9, artThrowStackOverflowFromCode
jalr $zero, $t9 # artThrowStackOverflowFromCode(Thread*)
move $a0, rSELF # pass Thread::Current
END art_quick_throw_stack_overflow
/*
* Called by managed code to create and deliver a NoSuchMethodError.
*/
.extern artThrowNoSuchMethodFromCode
ENTRY art_quick_throw_no_such_method
SETUP_SAVE_ALL_CALLEE_SAVE_FRAME
la $t9, artThrowNoSuchMethodFromCode
jalr $zero, $t9 # artThrowNoSuchMethodFromCode(method_idx, Thread*)
move $a1, rSELF # pass Thread::Current
END art_quick_throw_no_such_method
/*
* All generated callsites for interface invokes and invocation slow paths will load arguments
* as usual - except instead of loading arg0/$a0 with the target Method*, arg0/$a0 will contain
* the method_idx. This wrapper will save arg1-arg3, load the caller's Method*, align the
* stack and call the appropriate C helper.
* NOTE: "this" is first visable argument of the target, and so can be found in arg1/$a1.
*
* The helper will attempt to locate the target and return a 64-bit result in $v0/$v1 consisting
* of the target Method* in $v0 and method->code_ in $v1.
*
* If unsuccessful, the helper will return null/null. There will be a pending exception in the
* thread and we branch to another stub to deliver it.
*
* On success this wrapper will restore arguments and *jump* to the target, leaving the lr
* pointing back to the original caller.
*/
.macro INVOKE_TRAMPOLINE c_name, cxx_name
.extern \cxx_name
ENTRY \c_name
SETUP_REFS_AND_ARGS_CALLEE_SAVE_FRAME # save callee saves in case allocation triggers GC
lw $a2, FRAME_SIZE_REFS_AND_ARGS_CALLEE_SAVE+ARG_SLOT_SIZE($sp) # pass caller Method*
addiu $t0, $sp, ARG_SLOT_SIZE # save $sp (remove arg slots)
move $a3, rSELF # pass Thread::Current
jal \cxx_name # (method_idx, this, caller, Thread*, $sp)
sw $t0, 16($sp) # pass $sp
move $a0, $v0 # save target Method*
RESTORE_REFS_AND_ARGS_CALLEE_SAVE_FRAME
beqz $v0, 1f
move $t9, $v1 # save $v0->code_
jalr $zero, $t9
nop
1:
DELIVER_PENDING_EXCEPTION
END \c_name
.endm
INVOKE_TRAMPOLINE art_quick_invoke_interface_trampoline, artInvokeInterfaceTrampoline
INVOKE_TRAMPOLINE art_quick_invoke_interface_trampoline_with_access_check, artInvokeInterfaceTrampolineWithAccessCheck
INVOKE_TRAMPOLINE art_quick_invoke_static_trampoline_with_access_check, artInvokeStaticTrampolineWithAccessCheck
INVOKE_TRAMPOLINE art_quick_invoke_direct_trampoline_with_access_check, artInvokeDirectTrampolineWithAccessCheck
INVOKE_TRAMPOLINE art_quick_invoke_super_trampoline_with_access_check, artInvokeSuperTrampolineWithAccessCheck
INVOKE_TRAMPOLINE art_quick_invoke_virtual_trampoline_with_access_check, artInvokeVirtualTrampolineWithAccessCheck
/*
* Invocation stub for quick code.
* On entry:
* a0 = method pointer
* a1 = argument array or null for no argument methods
* a2 = size of argument array in bytes
* a3 = (managed) thread pointer
* [sp + 16] = JValue* result
* [sp + 20] = shorty
*/
ENTRY art_quick_invoke_stub
sw $a0, 0($sp) # save out a0
addiu $sp, $sp, -16 # spill s0, s1, fp, ra
.cfi_adjust_cfa_offset 16
sw $ra, 12($sp)
.cfi_rel_offset 31, 12
sw $fp, 8($sp)
.cfi_rel_offset 30, 8
sw $s1, 4($sp)
.cfi_rel_offset 17, 4
sw $s0, 0($sp)
.cfi_rel_offset 16, 0
move $fp, $sp # save sp in fp
.cfi_def_cfa_register 30
move $s1, $a3 # move managed thread pointer into s1
addiu $s0, $zero, SUSPEND_CHECK_INTERVAL # reset s0 to suspend check interval
addiu $t0, $a2, 4 # create space for method pointer in frame.
subu $t0, $sp, $t0 # reserve & align *stack* to 16 bytes:
srl $t0, $t0, 4 # native calling convention only aligns to 8B,
sll $sp, $t0, 4 # so we have to ensure ART 16B alignment ourselves.
addiu $a0, $sp, 4 # pass stack pointer + method ptr as dest for memcpy
jal memcpy # (dest, src, bytes)
addiu $sp, $sp, -16 # make space for argument slots for memcpy
addiu $sp, $sp, 16 # restore stack after memcpy
lw $a0, 16($fp) # restore method*
lw $a1, 4($sp) # copy arg value for a1
lw $a2, 8($sp) # copy arg value for a2
lw $a3, 12($sp) # copy arg value for a3
lw $t9, ART_METHOD_QUICK_CODE_OFFSET_32($a0) # get pointer to the code
jalr $t9 # call the method
sw $zero, 0($sp) # store null for method* at bottom of frame
move $sp, $fp # restore the stack
lw $s0, 0($sp)
.cfi_restore 16
lw $s1, 4($sp)
.cfi_restore 17
lw $fp, 8($sp)
.cfi_restore 30
lw $ra, 12($sp)
.cfi_restore 31
addiu $sp, $sp, 16
.cfi_adjust_cfa_offset -16
lw $t0, 16($sp) # get result pointer
lw $t1, 20($sp) # get shorty
lb $t1, 0($t1) # get result type char
li $t2, 68 # put char 'D' into t2
beq $t1, $t2, 1f # branch if result type char == 'D'
li $t3, 70 # put char 'F' into t3
beq $t1, $t3, 1f # branch if result type char == 'F'
sw $v0, 0($t0) # store the result
jalr $zero, $ra
sw $v1, 4($t0) # store the other half of the result
1:
SDu $f0, $f1, 0, $t0, $t1 # store floating point result
jalr $zero, $ra
nop
END art_quick_invoke_stub
/*
* Entry from managed code that calls artHandleFillArrayDataFromCode and delivers exception on
* failure.
*/
.extern artHandleFillArrayDataFromCode
ENTRY art_quick_handle_fill_data
lw $a2, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case exception allocation triggers GC
jal artHandleFillArrayDataFromCode # (payload offset, Array*, method, Thread*)
move $a3, rSELF # pass Thread::Current
RETURN_IF_ZERO
END art_quick_handle_fill_data
/*
* Entry from managed code that calls artLockObjectFromCode, may block for GC.
*/
.extern artLockObjectFromCode
ENTRY art_quick_lock_object
beqz $a0, .Lart_quick_throw_null_pointer_exception_gp_set
nop
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case we block
jal artLockObjectFromCode # (Object* obj, Thread*)
move $a1, rSELF # pass Thread::Current
RETURN_IF_ZERO
END art_quick_lock_object
/*
* Entry from managed code that calls artUnlockObjectFromCode and delivers exception on failure.
*/
.extern artUnlockObjectFromCode
ENTRY art_quick_unlock_object
beqz $a0, .Lart_quick_throw_null_pointer_exception_gp_set
nop
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case exception allocation triggers GC
jal artUnlockObjectFromCode # (Object* obj, Thread*)
move $a1, rSELF # pass Thread::Current
RETURN_IF_ZERO
END art_quick_unlock_object
/*
* Entry from managed code that calls artCheckCastFromCode and delivers exception on failure.
*/
.extern artThrowClassCastException
ENTRY art_quick_check_cast
addiu $sp, $sp, -16
.cfi_adjust_cfa_offset 16
sw $ra, 12($sp)
.cfi_rel_offset 31, 12
sw $t9, 8($sp)
sw $a1, 4($sp)
sw $a0, 0($sp)
jal artIsAssignableFromCode
addiu $sp, $sp, -16 # reserve argument slots on the stack
addiu $sp, $sp, 16
beqz $v0, .Lthrow_class_cast_exception
lw $ra, 12($sp)
jalr $zero, $ra
addiu $sp, $sp, 16
.cfi_adjust_cfa_offset -16
.Lthrow_class_cast_exception:
lw $t9, 8($sp)
lw $a1, 4($sp)
lw $a0, 0($sp)
addiu $sp, $sp, 16
.cfi_adjust_cfa_offset -16
SETUP_SAVE_ALL_CALLEE_SAVE_FRAME
la $t9, artThrowClassCastException
jalr $zero, $t9 # artThrowClassCastException (Class*, Class*, Thread*)
move $a2, rSELF # pass Thread::Current
END art_quick_check_cast
/*
* Entry from managed code for array put operations of objects where the value being stored
* needs to be checked for compatibility.
* a0 = array, a1 = index, a2 = value
*/
ENTRY art_quick_aput_obj_with_null_and_bound_check
bnez $a0, .Lart_quick_aput_obj_with_bound_check_gp_set
nop
b .Lart_quick_throw_null_pointer_exception_gp_set
nop
END art_quick_aput_obj_with_null_and_bound_check
ENTRY art_quick_aput_obj_with_bound_check
lw $t0, MIRROR_ARRAY_LENGTH_OFFSET($a0)
sltu $t1, $a1, $t0
bnez $t1, .Lart_quick_aput_obj_gp_set
nop
move $a0, $a1
b .Lart_quick_throw_array_bounds_gp_set
move $a1, $t0
END art_quick_aput_obj_with_bound_check
ENTRY art_quick_aput_obj
beqz $a2, .Ldo_aput_null
nop
lw $t0, MIRROR_OBJECT_CLASS_OFFSET($a0)
lw $t1, MIRROR_OBJECT_CLASS_OFFSET($a2)
lw $t0, MIRROR_CLASS_COMPONENT_TYPE_OFFSET($t0)
bne $t1, $t0, .Lcheck_assignability # value's type == array's component type - trivial assignability
nop
.Ldo_aput:
sll $a1, $a1, 2
add $t0, $a0, $a1
sw $a2, MIRROR_OBJECT_ARRAY_DATA_OFFSET($t0)
lw $t0, THREAD_CARD_TABLE_OFFSET(rSELF)
srl $t1, $a0, 7
add $t1, $t1, $t0
sb $t0, ($t1)
jalr $zero, $ra
nop
.Ldo_aput_null:
sll $a1, $a1, 2
add $t0, $a0, $a1
sw $a2, MIRROR_OBJECT_ARRAY_DATA_OFFSET($t0)
jalr $zero, $ra
nop
.Lcheck_assignability:
addiu $sp, $sp, -32
.cfi_adjust_cfa_offset 32
sw $ra, 28($sp)
.cfi_rel_offset 31, 28
sw $t9, 12($sp)
sw $a2, 8($sp)
sw $a1, 4($sp)
sw $a0, 0($sp)
move $a1, $t1
move $a0, $t0
jal artIsAssignableFromCode # (Class*, Class*)
addiu $sp, $sp, -16 # reserve argument slots on the stack
addiu $sp, $sp, 16
lw $ra, 28($sp)
lw $t9, 12($sp)
lw $a2, 8($sp)
lw $a1, 4($sp)
lw $a0, 0($sp)
addiu $sp, 32
.cfi_adjust_cfa_offset -32
bnez $v0, .Ldo_aput
nop
SETUP_SAVE_ALL_CALLEE_SAVE_FRAME
move $a1, $a2
la $t9, artThrowArrayStoreException
jalr $zero, $t9 # artThrowArrayStoreException(Class*, Class*, Thread*)
move $a2, rSELF # pass Thread::Current
END art_quick_aput_obj
/*
* Called by managed code to resolve a static field and load a boolean primitive value.
*/
.extern artGetBooleanStaticFromCode
ENTRY art_quick_get_boolean_static
lw $a1, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGetBooleanStaticFromCode # (uint32_t field_idx, const Method* referrer, Thread*)
move $a2, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get_boolean_static
/*
* Called by managed code to resolve a static field and load a byte primitive value.
*/
.extern artGetByteStaticFromCode
ENTRY art_quick_get_byte_static
lw $a1, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGetByteStaticFromCode # (uint32_t field_idx, const Method* referrer, Thread*)
move $a2, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get_byte_static
/*
* Called by managed code to resolve a static field and load a char primitive value.
*/
.extern artGetCharStaticFromCode
ENTRY art_quick_get_char_static
lw $a1, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGetCharStaticFromCode # (uint32_t field_idx, const Method* referrer, Thread*)
move $a2, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get_char_static
/*
* Called by managed code to resolve a static field and load a short primitive value.
*/
.extern artGetShortStaticFromCode
ENTRY art_quick_get_short_static
lw $a1, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGetShortStaticFromCode # (uint32_t field_idx, const Method* referrer, Thread*)
move $a2, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get_short_static
/*
* Called by managed code to resolve a static field and load a 32-bit primitive value.
*/
.extern artGet32StaticFromCode
ENTRY art_quick_get32_static
lw $a1, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGet32StaticFromCode # (uint32_t field_idx, const Method* referrer, Thread*)
move $a2, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get32_static
/*
* Called by managed code to resolve a static field and load a 64-bit primitive value.
*/
.extern artGet64StaticFromCode
ENTRY art_quick_get64_static
lw $a1, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGet64StaticFromCode # (uint32_t field_idx, const Method* referrer, Thread*)
move $a2, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get64_static
/*
* Called by managed code to resolve a static field and load an object reference.
*/
.extern artGetObjStaticFromCode
ENTRY art_quick_get_obj_static
lw $a1, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGetObjStaticFromCode # (uint32_t field_idx, const Method* referrer, Thread*)
move $a2, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get_obj_static
/*
* Called by managed code to resolve an instance field and load a boolean primitive value.
*/
.extern artGetBooleanInstanceFromCode
ENTRY art_quick_get_boolean_instance
lw $a2, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGetBooleanInstanceFromCode # (field_idx, Object*, referrer, Thread*)
move $a3, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get_boolean_instance
/*
* Called by managed code to resolve an instance field and load a byte primitive value.
*/
.extern artGetByteInstanceFromCode
ENTRY art_quick_get_byte_instance
lw $a2, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGetByteInstanceFromCode # (field_idx, Object*, referrer, Thread*)
move $a3, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get_byte_instance
/*
* Called by managed code to resolve an instance field and load a char primitive value.
*/
.extern artGetCharInstanceFromCode
ENTRY art_quick_get_char_instance
lw $a2, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGetCharInstanceFromCode # (field_idx, Object*, referrer, Thread*)
move $a3, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get_char_instance
/*
* Called by managed code to resolve an instance field and load a short primitive value.
*/
.extern artGetShortInstanceFromCode
ENTRY art_quick_get_short_instance
lw $a2, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGetShortInstanceFromCode # (field_idx, Object*, referrer, Thread*)
move $a3, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get_short_instance
/*
* Called by managed code to resolve an instance field and load a 32-bit primitive value.
*/
.extern artGet32InstanceFromCode
ENTRY art_quick_get32_instance
lw $a2, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGet32InstanceFromCode # (field_idx, Object*, referrer, Thread*)
move $a3, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get32_instance
/*
* Called by managed code to resolve an instance field and load a 64-bit primitive value.
*/
.extern artGet64InstanceFromCode
ENTRY art_quick_get64_instance
lw $a2, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGet64InstanceFromCode # (field_idx, Object*, referrer, Thread*)
move $a3, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get64_instance
/*
* Called by managed code to resolve an instance field and load an object reference.
*/
.extern artGetObjInstanceFromCode
ENTRY art_quick_get_obj_instance
lw $a2, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artGetObjInstanceFromCode # (field_idx, Object*, referrer, Thread*)
move $a3, rSELF # pass Thread::Current
RETURN_IF_NO_EXCEPTION
END art_quick_get_obj_instance
/*
* Called by managed code to resolve a static field and store a 8-bit primitive value.
*/
.extern artSet8StaticFromCode
ENTRY art_quick_set8_static
lw $a2, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artSet8StaticFromCode # (field_idx, new_val, referrer, Thread*)
move $a3, rSELF # pass Thread::Current
RETURN_IF_ZERO
END art_quick_set8_static
/*
* Called by managed code to resolve a static field and store a 16-bit primitive value.
*/
.extern artSet16StaticFromCode
ENTRY art_quick_set16_static
lw $a2, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artSet16StaticFromCode # (field_idx, new_val, referrer, Thread*, $sp)
move $a3, rSELF # pass Thread::Current
RETURN_IF_ZERO
END art_quick_set16_static
/*
* Called by managed code to resolve a static field and store a 32-bit primitive value.
*/
.extern artSet32StaticFromCode
ENTRY art_quick_set32_static
lw $a2, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artSet32StaticFromCode # (field_idx, new_val, referrer, Thread*)
move $a3, rSELF # pass Thread::Current
RETURN_IF_ZERO
END art_quick_set32_static
/*
* Called by managed code to resolve a static field and store a 64-bit primitive value.
*/
.extern artSet64StaticFromCode
ENTRY art_quick_set64_static
lw $a1, 0($sp) # pass referrer's Method*
# 64 bit new_val is in a2:a3 pair
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artSet64StaticFromCode # (field_idx, referrer, new_val, Thread*)
sw rSELF, 16($sp) # pass Thread::Current
RETURN_IF_ZERO
END art_quick_set64_static
/*
* Called by managed code to resolve a static field and store an object reference.
*/
.extern artSetObjStaticFromCode
ENTRY art_quick_set_obj_static
lw $a2, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
move $a3, rSELF # pass Thread::Current
jal artSetObjStaticFromCode # (field_idx, new_val, referrer, Thread*)
RETURN_IF_ZERO
END art_quick_set_obj_static
/*
* Called by managed code to resolve an instance field and store a 8-bit primitive value.
*/
.extern artSet8InstanceFromCode
ENTRY art_quick_set8_instance
lw $a3, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artSet8InstanceFromCode # (field_idx, Object*, new_val, referrer, Thread*)
sw rSELF, 16($sp) # pass Thread::Current
RETURN_IF_ZERO
END art_quick_set8_instance
/*
* Called by managed code to resolve an instance field and store a 16-bit primitive value.
*/
.extern artSet16InstanceFromCode
ENTRY art_quick_set16_instance
lw $a3, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artSet16InstanceFromCode # (field_idx, Object*, new_val, referrer, Thread*)
sw rSELF, 16($sp) # pass Thread::Current
RETURN_IF_ZERO
END art_quick_set16_instance
/*
* Called by managed code to resolve an instance field and store a 32-bit primitive value.
*/
.extern artSet32InstanceFromCode
ENTRY art_quick_set32_instance
lw $a3, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artSet32InstanceFromCode # (field_idx, Object*, new_val, referrer, Thread*)
sw rSELF, 16($sp) # pass Thread::Current
RETURN_IF_ZERO
END art_quick_set32_instance
/*
* Called by managed code to resolve an instance field and store a 64-bit primitive value.
*/
.extern artSet64InstanceFromCode
ENTRY art_quick_set64_instance
lw $t1, 0($sp) # load referrer's Method*
# 64 bit new_val is in a2:a3 pair
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
sw rSELF, 20($sp) # pass Thread::Current
jal artSet64InstanceFromCode # (field_idx, Object*, new_val, referrer, Thread*)
sw $t1, 16($sp) # pass referrer's Method*
RETURN_IF_ZERO
END art_quick_set64_instance
/*
* Called by managed code to resolve an instance field and store an object reference.
*/
.extern artSetObjInstanceFromCode
ENTRY art_quick_set_obj_instance
lw $a3, 0($sp) # pass referrer's Method*
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal artSetObjInstanceFromCode # (field_idx, Object*, new_val, referrer, Thread*)
sw rSELF, 16($sp) # pass Thread::Current
RETURN_IF_ZERO
END art_quick_set_obj_instance
// Macro to facilitate adding new allocation entrypoints.
.macro ONE_ARG_DOWNCALL name, entrypoint, return
.extern \entrypoint
ENTRY \name
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal \entrypoint
move $a1, rSELF # pass Thread::Current
\return
END \name
.endm
.macro TWO_ARG_DOWNCALL name, entrypoint, return
.extern \entrypoint
ENTRY \name
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal \entrypoint
move $a2, rSELF # pass Thread::Current
\return
END \name
.endm
.macro THREE_ARG_DOWNCALL name, entrypoint, return
.extern \entrypoint
ENTRY \name
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal \entrypoint
move $a3, rSELF # pass Thread::Current
\return
END \name
.endm
.macro FOUR_ARG_DOWNCALL name, entrypoint, return
.extern \entrypoint
ENTRY \name
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves in case of GC
jal \entrypoint
sw rSELF, 16($sp) # pass Thread::Current
\return
END \name
.endm
// Generate the allocation entrypoints for each allocator.
GENERATE_ALL_ALLOC_ENTRYPOINTS
/*
* Entry from managed code to resolve a string, this stub will allocate a String and deliver an
* exception on error. On success the String is returned. A0 holds the string index. The fast
* path check for hit in strings cache has already been performed.
*/
ONE_ARG_DOWNCALL art_quick_resolve_string, artResolveStringFromCode, RETURN_IF_RESULT_IS_NON_ZERO_OR_DELIVER
/*
* Entry from managed code when uninitialized static storage, this stub will run the class
* initializer and deliver the exception on error. On success the static storage base is
* returned.
*/
ONE_ARG_DOWNCALL art_quick_initialize_static_storage, artInitializeStaticStorageFromCode, RETURN_IF_RESULT_IS_NON_ZERO_OR_DELIVER
/*
* Entry from managed code when dex cache misses for a type_idx.
*/
ONE_ARG_DOWNCALL art_quick_initialize_type, artInitializeTypeFromCode, RETURN_IF_RESULT_IS_NON_ZERO_OR_DELIVER
/*
* Entry from managed code when type_idx needs to be checked for access and dex cache may also
* miss.
*/
ONE_ARG_DOWNCALL art_quick_initialize_type_and_verify_access, artInitializeTypeAndVerifyAccessFromCode, RETURN_IF_RESULT_IS_NON_ZERO_OR_DELIVER
/*
* Called by managed code when the value in rSUSPEND has been decremented to 0.
*/
.extern artTestSuspendFromCode
ENTRY art_quick_test_suspend
lh $a0, THREAD_FLAGS_OFFSET(rSELF)
bnez $a0, 1f
addiu rSUSPEND, $zero, SUSPEND_CHECK_INTERVAL # reset rSUSPEND to SUSPEND_CHECK_INTERVAL
jalr $zero, $ra
nop
1:
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME # save callee saves for stack crawl
jal artTestSuspendFromCode # (Thread*)
move $a0, rSELF
RESTORE_REFS_ONLY_CALLEE_SAVE_FRAME_AND_RETURN
END art_quick_test_suspend
/*
* Called by managed code that is attempting to call a method on a proxy class. On entry
* r0 holds the proxy method; r1, r2 and r3 may contain arguments.
*/
.extern artQuickProxyInvokeHandler
ENTRY art_quick_proxy_invoke_handler
SETUP_REFS_AND_ARGS_CALLEE_SAVE_FRAME_WITH_METHOD_IN_A0
move $a2, rSELF # pass Thread::Current
jal artQuickProxyInvokeHandler # (Method* proxy method, receiver, Thread*, SP)
addiu $a3, $sp, ARG_SLOT_SIZE # pass $sp (remove arg slots)
lw $t0, THREAD_EXCEPTION_OFFSET(rSELF) # load Thread::Current()->exception_
RESTORE_REFS_AND_ARGS_CALLEE_SAVE_FRAME
bnez $t0, 1f
# don't care if $v0 and/or $v1 are modified, when exception branch taken
MTD $v0, $v1, $f0, $f1 # move float value to return value
jalr $zero, $ra
nop
1:
DELIVER_PENDING_EXCEPTION
END art_quick_proxy_invoke_handler
/*
* Called to resolve an imt conflict. t0 is a hidden argument that holds the target method's
* dex method index.
*/
ENTRY art_quick_imt_conflict_trampoline
lw $a0, 0($sp) # load caller Method*
lw $a0, ART_METHOD_DEX_CACHE_METHODS_OFFSET($a0) # load dex_cache_resolved_methods
sll $t0, 2 # convert target method offset to bytes
add $a0, $t0 # get address of target method
lw $a0, MIRROR_OBJECT_ARRAY_DATA_OFFSET($a0) # load the target method
la $t9, art_quick_invoke_interface_trampoline
jalr $zero, $t9
END art_quick_imt_conflict_trampoline
.extern artQuickResolutionTrampoline
ENTRY art_quick_resolution_trampoline
SETUP_REFS_AND_ARGS_CALLEE_SAVE_FRAME
move $a2, rSELF # pass Thread::Current
jal artQuickResolutionTrampoline # (Method* called, receiver, Thread*, SP)
addiu $a3, $sp, ARG_SLOT_SIZE # pass $sp (remove arg slots)
beqz $v0, 1f
lw $a0, ARG_SLOT_SIZE($sp) # load resolved method to $a0
RESTORE_REFS_AND_ARGS_CALLEE_SAVE_FRAME
move $t9, $v0 # code pointer must be in $t9 to generate the global pointer
jalr $zero, $t9 # tail call to method
nop
1:
RESTORE_REFS_AND_ARGS_CALLEE_SAVE_FRAME
DELIVER_PENDING_EXCEPTION
END art_quick_resolution_trampoline
.extern artQuickGenericJniTrampoline
.extern artQuickGenericJniEndTrampoline
ENTRY art_quick_generic_jni_trampoline
SETUP_REFS_AND_ARGS_CALLEE_SAVE_FRAME_WITH_METHOD_IN_A0
move $s8, $sp # save $sp to $s8
move $s3, $gp # save $gp to $s3
# prepare for call to artQuickGenericJniTrampoline(Thread*, SP)
move $a0, rSELF # pass Thread::Current
addiu $a1, $sp, ARG_SLOT_SIZE # save $sp (remove arg slots)
jal artQuickGenericJniTrampoline # (Thread*, SP)
addiu $sp, $sp, -5120 # reserve space on the stack
# The C call will have registered the complete save-frame on success.
# The result of the call is:
# v0: ptr to native code, 0 on error.
# v1: ptr to the bottom of the used area of the alloca, can restore stack till here.
beq $v0, $zero, 1f # check entry error
move $t9, $v0 # save the code ptr
move $sp, $v1 # release part of the alloca
# Load parameters from stack into registers
lw $a0, 0($sp)
lw $a1, 4($sp)
lw $a2, 8($sp)
# Load FPRs the same as GPRs. Look at BuildNativeCallFrameStateMachine.
jalr $t9 # native call
lw $a3, 12($sp)
addiu $sp, $sp, 16 # remove arg slots
move $gp, $s3 # restore $gp from $s3
# result sign extension is handled in C code
# prepare for call to artQuickGenericJniEndTrampoline(Thread*, result, result_f)
move $a0, rSELF # pass Thread::Current
move $a2, $v0 # pass result
move $a3, $v1
addiu $sp, $sp, -24 # reserve arg slots
jal artQuickGenericJniEndTrampoline
s.d $f0, 16($sp) # pass result_f
lw $t0, THREAD_EXCEPTION_OFFSET(rSELF) # load Thread::Current()->exception_
bne $t0, $zero, 1f # check for pending exceptions
move $sp, $s8 # tear down the alloca
# tear dpown the callee-save frame
RESTORE_REFS_AND_ARGS_CALLEE_SAVE_FRAME
MTD $v0, $v1, $f0, $f1 # move float value to return value
jalr $zero, $ra
nop
1:
lw $sp, THREAD_TOP_QUICK_FRAME_OFFSET(rSELF)
# This will create a new save-all frame, required by the runtime.
DELIVER_PENDING_EXCEPTION
END art_quick_generic_jni_trampoline
.extern artQuickToInterpreterBridge
ENTRY art_quick_to_interpreter_bridge
SETUP_REFS_AND_ARGS_CALLEE_SAVE_FRAME
move $a1, rSELF # pass Thread::Current
jal artQuickToInterpreterBridge # (Method* method, Thread*, SP)
addiu $a2, $sp, ARG_SLOT_SIZE # pass $sp (remove arg slots)
lw $t0, THREAD_EXCEPTION_OFFSET(rSELF) # load Thread::Current()->exception_
RESTORE_REFS_AND_ARGS_CALLEE_SAVE_FRAME
bnez $t0, 1f
# don't care if $v0 and/or $v1 are modified, when exception branch taken
MTD $v0, $v1, $f0, $f1 # move float value to return value
jalr $zero, $ra
nop
1:
DELIVER_PENDING_EXCEPTION
END art_quick_to_interpreter_bridge
/*
* Routine that intercepts method calls and returns.
*/
.extern artInstrumentationMethodEntryFromCode
.extern artInstrumentationMethodExitFromCode
ENTRY art_quick_instrumentation_entry
SETUP_REFS_AND_ARGS_CALLEE_SAVE_FRAME
sw $a0, 28($sp) # save arg0 in free arg slot
move $a3, $ra # pass $ra
jal artInstrumentationMethodEntryFromCode # (Method*, Object*, Thread*, LR)
move $a2, rSELF # pass Thread::Current
move $t9, $v0 # $t9 holds reference to code
lw $a0, 28($sp) # restore arg0 from free arg slot
RESTORE_REFS_AND_ARGS_CALLEE_SAVE_FRAME
jalr $t9 # call method
nop
END art_quick_instrumentation_entry
/* intentional fallthrough */
.global art_quick_instrumentation_exit
art_quick_instrumentation_exit:
.cfi_startproc
addiu $t9, $ra, 4 # put current address into $t9 to rebuild $gp
.cpload $t9
move $ra, $zero # link register is to here, so clobber with 0 for later checks
SETUP_REFS_ONLY_CALLEE_SAVE_FRAME
addiu $sp, $sp, -16 # allocate temp storage on the stack
.cfi_adjust_cfa_offset 16
sw $v0, ARG_SLOT_SIZE+12($sp)
.cfi_rel_offset 2, ARG_SLOT_SIZE+12
sw $v1, ARG_SLOT_SIZE+8($sp)
.cfi_rel_offset 3, ARG_SLOT_SIZE+8
s.d $f0, ARG_SLOT_SIZE($sp)
s.d $f0, 16($sp) # pass fpr result
move $a2, $v0 # pass gpr result
move $a3, $v1
addiu $a1, $sp, ARG_SLOT_SIZE+16 # pass $sp (remove arg slots and temp storage)
jal artInstrumentationMethodExitFromCode # (Thread*, SP, gpr_res, fpr_res)
move $a0, rSELF # pass Thread::Current
move $t9, $v0 # set aside returned link register
move $ra, $v1 # set link register for deoptimization
lw $v0, ARG_SLOT_SIZE+12($sp) # restore return values
lw $v1, ARG_SLOT_SIZE+8($sp)
l.d $f0, ARG_SLOT_SIZE($sp)
jalr $zero, $t9 # return
addiu $sp, $sp, ARG_SLOT_SIZE+FRAME_SIZE_REFS_ONLY_CALLEE_SAVE+16 # restore stack
.cfi_adjust_cfa_offset -(ARG_SLOT_SIZE+FRAME_SIZE_REFS_ONLY_CALLEE_SAVE+16)
END art_quick_instrumentation_exit
/*
* Instrumentation has requested that we deoptimize into the interpreter. The deoptimization
* will long jump to the upcall with a special exception of -1.
*/
.extern artDeoptimize
ENTRY art_quick_deoptimize
SETUP_SAVE_ALL_CALLEE_SAVE_FRAME
jal artDeoptimize # artDeoptimize(Thread*)
# Returns caller method's frame size.
move $a0, rSELF # pass Thread::current
END art_quick_deoptimize
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to ignore all but the low
* 6 bits.
* On entry:
* $a0: low word
* $a1: high word
* $a2: shift count
*/
ENTRY_NO_GP art_quick_shl_long
/* shl-long vAA, vBB, vCC */
sll $v0, $a0, $a2 # rlo<- alo << (shift&31)
not $v1, $a2 # rhi<- 31-shift (shift is 5b)
srl $a0, 1
srl $a0, $v1 # alo<- alo >> (32-(shift&31))
sll $v1, $a1, $a2 # rhi<- ahi << (shift&31)
andi $a2, 0x20 # shift< shift & 0x20
beqz $a2, 1f
or $v1, $a0 # rhi<- rhi | alo
move $v1, $v0 # rhi<- rlo (if shift&0x20)
move $v0, $zero # rlo<- 0 (if shift&0x20)
1: jalr $zero, $ra
nop
END art_quick_shl_long
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to ignore all but the low
* 6 bits.
* On entry:
* $a0: low word
* $a1: high word
* $a2: shift count
*/
ENTRY_NO_GP art_quick_shr_long
sra $v1, $a1, $a2 # rhi<- ahi >> (shift&31)
srl $v0, $a0, $a2 # rlo<- alo >> (shift&31)
sra $a3, $a1, 31 # $a3<- sign(ah)
not $a0, $a2 # alo<- 31-shift (shift is 5b)
sll $a1, 1
sll $a1, $a0 # ahi<- ahi << (32-(shift&31))
andi $a2, 0x20 # shift & 0x20
beqz $a2, 1f
or $v0, $a1 # rlo<- rlo | ahi
move $v0, $v1 # rlo<- rhi (if shift&0x20)
move $v1, $a3 # rhi<- sign(ahi) (if shift&0x20)
1: jalr $zero, $ra
nop
END art_quick_shr_long
/*
* Long integer shift. This is different from the generic 32/64-bit
* binary operations because vAA/vBB are 64-bit but vCC (the shift
* distance) is 32-bit. Also, Dalvik requires us to ignore all but the low
* 6 bits.
* On entry:
* r0: low word
* r1: high word
* r2: shift count
*/
/* ushr-long vAA, vBB, vCC */
ENTRY_NO_GP art_quick_ushr_long
srl $v1, $a1, $a2 # rhi<- ahi >> (shift&31)
srl $v0, $a0, $a2 # rlo<- alo >> (shift&31)
not $a0, $a2 # alo<- 31-shift (shift is 5b)
sll $a1, 1
sll $a1, $a0 # ahi<- ahi << (32-(shift&31))
andi $a2, 0x20 # shift & 0x20
beqz $a2, 1f
or $v0, $a1 # rlo<- rlo | ahi
move $v0, $v1 # rlo<- rhi (if shift&0x20)
move $v1, $zero # rhi<- 0 (if shift&0x20)
1: jalr $zero, $ra
nop
END art_quick_ushr_long
UNIMPLEMENTED art_quick_indexof
UNIMPLEMENTED art_quick_string_compareto