/******************************************************************************
*
* Copyright (C) 2009-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* This is the implementation file for the MCAP at L2CAP Interface.
*
******************************************************************************/
#include <string.h>
#include "bt_target.h"
#include "bt_utils.h"
#include "btm_api.h"
#include "btm_int.h"
#include "mca_api.h"
#include "mca_defs.h"
#include "mca_int.h"
/* L2CAP callback function structure */
const tL2CAP_APPL_INFO mca_l2c_int_appl =
{
NULL,
mca_l2c_connect_cfm_cback,
NULL,
mca_l2c_config_ind_cback,
mca_l2c_config_cfm_cback,
mca_l2c_disconnect_ind_cback,
mca_l2c_disconnect_cfm_cback,
NULL,
mca_l2c_data_ind_cback,
mca_l2c_congestion_ind_cback,
NULL
};
/* Control channel eL2CAP default options */
const tL2CAP_FCR_OPTS mca_l2c_fcr_opts_def =
{
L2CAP_FCR_ERTM_MODE, /* Mandatory for MCAP */
MCA_FCR_OPT_TX_WINDOW_SIZE, /* Tx window size */
MCA_FCR_OPT_MAX_TX_B4_DISCNT, /* Maximum transmissions before disconnecting */
MCA_FCR_OPT_RETX_TOUT, /* Retransmission timeout (2 secs) */
MCA_FCR_OPT_MONITOR_TOUT, /* Monitor timeout (12 secs) */
MCA_FCR_OPT_MPS_SIZE /* MPS segment size */
};
/*******************************************************************************
**
** Function mca_sec_check_complete_term
**
** Description The function called when Security Manager finishes
** verification of the service side connection
**
** Returns void
**
*******************************************************************************/
static void mca_sec_check_complete_term (BD_ADDR bd_addr, tBT_TRANSPORT transport, void *p_ref_data, UINT8 res)
{
tMCA_TC_TBL *p_tbl = (tMCA_TC_TBL *)p_ref_data;
tL2CAP_CFG_INFO cfg;
tL2CAP_ERTM_INFO ertm_info;
UNUSED(transport);
MCA_TRACE_DEBUG("mca_sec_check_complete_term res: %d", res);
if ( res == BTM_SUCCESS )
{
MCA_TRACE_DEBUG ("lcid:x%x id:x%x", p_tbl->lcid, p_tbl->id);
/* Set the FCR options: control channel mandates ERTM */
ertm_info.preferred_mode = mca_l2c_fcr_opts_def.mode;
ertm_info.allowed_modes = L2CAP_FCR_CHAN_OPT_ERTM;
ertm_info.user_rx_pool_id = MCA_USER_RX_POOL_ID;
ertm_info.user_tx_pool_id = MCA_USER_TX_POOL_ID;
ertm_info.fcr_rx_pool_id = MCA_FCR_RX_POOL_ID;
ertm_info.fcr_tx_pool_id = MCA_FCR_TX_POOL_ID;
/* Send response to the L2CAP layer. */
L2CA_ErtmConnectRsp (bd_addr, p_tbl->id, p_tbl->lcid, L2CAP_CONN_OK, L2CAP_CONN_OK, &ertm_info);
/* transition to configuration state */
p_tbl->state = MCA_TC_ST_CFG;
/* Send L2CAP config req */
mca_set_cfg_by_tbl (&cfg, p_tbl);
L2CA_ConfigReq(p_tbl->lcid, &cfg);
}
else
{
L2CA_ConnectRsp (bd_addr, p_tbl->id, p_tbl->lcid, L2CAP_CONN_SECURITY_BLOCK, L2CAP_CONN_OK);
mca_tc_close_ind(p_tbl, L2CAP_CONN_SECURITY_BLOCK);
}
}
/*******************************************************************************
**
** Function mca_sec_check_complete_orig
**
** Description The function called when Security Manager finishes
** verification of the service side connection
**
** Returns void
**
*******************************************************************************/
static void mca_sec_check_complete_orig (BD_ADDR bd_addr, tBT_TRANSPORT transport, void *p_ref_data, UINT8 res)
{
tMCA_TC_TBL *p_tbl = (tMCA_TC_TBL *)p_ref_data;
tL2CAP_CFG_INFO cfg;
UNUSED(bd_addr);
UNUSED(transport);
MCA_TRACE_DEBUG("mca_sec_check_complete_orig res: %d", res);
if ( res == BTM_SUCCESS )
{
/* set channel state */
p_tbl->state = MCA_TC_ST_CFG;
/* Send L2CAP config req */
mca_set_cfg_by_tbl (&cfg, p_tbl);
L2CA_ConfigReq(p_tbl->lcid, &cfg);
}
else
{
L2CA_DisconnectReq (p_tbl->lcid);
mca_tc_close_ind(p_tbl, L2CAP_CONN_SECURITY_BLOCK);
}
}
/*******************************************************************************
**
** Function mca_l2c_cconn_ind_cback
**
** Description This is the L2CAP connect indication callback function.
**
** Returns void
**
*******************************************************************************/
void mca_l2c_cconn_ind_cback(BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id)
{
tMCA_HANDLE handle = mca_handle_by_cpsm(psm);
tMCA_CCB *p_ccb;
tMCA_TC_TBL *p_tbl = NULL;
UINT16 result = L2CAP_CONN_NO_RESOURCES;
tBTM_STATUS rc;
tL2CAP_ERTM_INFO ertm_info, *p_ertm_info = NULL;
tL2CAP_CFG_INFO cfg;
MCA_TRACE_EVENT ("mca_l2c_cconn_ind_cback: lcid:x%x psm:x%x id:x%x", lcid, psm, id);
/* do we already have a control channel for this peer? */
if ((p_ccb = mca_ccb_by_bd(handle, bd_addr)) == NULL)
{
/* no, allocate ccb */
if ((p_ccb = mca_ccb_alloc(handle, bd_addr)) != NULL)
{
/* allocate and set up entry */
p_ccb->lcid = lcid;
p_tbl = mca_tc_tbl_calloc(p_ccb);
p_tbl->id = id;
p_tbl->cfg_flags= MCA_L2C_CFG_CONN_ACP;
/* proceed with connection */
/* Check the security */
rc = btm_sec_mx_access_request (bd_addr, psm, FALSE, BTM_SEC_PROTO_MCA, 0,
&mca_sec_check_complete_term, p_tbl);
if (rc == BTM_CMD_STARTED)
{
/* Set the FCR options: control channel mandates ERTM */
ertm_info.preferred_mode = mca_l2c_fcr_opts_def.mode;
ertm_info.allowed_modes = L2CAP_FCR_CHAN_OPT_ERTM;
ertm_info.user_rx_pool_id = MCA_USER_RX_POOL_ID;
ertm_info.user_tx_pool_id = MCA_USER_TX_POOL_ID;
ertm_info.fcr_rx_pool_id = MCA_FCR_RX_POOL_ID;
ertm_info.fcr_tx_pool_id = MCA_FCR_TX_POOL_ID;
p_ertm_info = &ertm_info;
result = L2CAP_CONN_PENDING;
}
else
result = L2CAP_CONN_OK;
}
/* deal with simultaneous control channel connect case */
}
/* else reject their connection */
if (!p_tbl || (p_tbl->state != MCA_TC_ST_CFG))
{
/* Send L2CAP connect rsp */
L2CA_ErtmConnectRsp (bd_addr, id, lcid, result, L2CAP_CONN_OK, p_ertm_info);
/* if result ok, proceed with connection and send L2CAP
config req */
if (result == L2CAP_CONN_OK)
{
/* set channel state */
p_tbl->state = MCA_TC_ST_CFG;
/* Send L2CAP config req */
mca_set_cfg_by_tbl (&cfg, p_tbl);
L2CA_ConfigReq(p_tbl->lcid, &cfg);
}
}
}
/*******************************************************************************
**
** Function mca_l2c_dconn_ind_cback
**
** Description This is the L2CAP connect indication callback function.
**
**
** Returns void
**
*******************************************************************************/
void mca_l2c_dconn_ind_cback(BD_ADDR bd_addr, UINT16 lcid, UINT16 psm, UINT8 id)
{
tMCA_HANDLE handle = mca_handle_by_dpsm(psm);
tMCA_CCB *p_ccb;
tMCA_DCB *p_dcb;
tMCA_TC_TBL *p_tbl = NULL;
UINT16 result;
tL2CAP_CFG_INFO cfg;
tL2CAP_ERTM_INFO *p_ertm_info = NULL, ertm_info;
const tMCA_CHNL_CFG *p_chnl_cfg;
MCA_TRACE_EVENT ("mca_l2c_dconn_ind_cback: lcid:x%x psm:x%x ", lcid, psm);
if (((p_ccb = mca_ccb_by_bd(handle, bd_addr)) != NULL) && /* find the CCB */
(p_ccb->status == MCA_CCB_STAT_PENDING) && /* this CCB is expecting a MDL */
(p_ccb->p_tx_req && (p_dcb = mca_dcb_by_hdl(p_ccb->p_tx_req->dcb_idx)) != NULL))
{
/* found the associated dcb in listening mode */
/* proceed with connection */
p_dcb->lcid = lcid;
p_tbl = mca_tc_tbl_dalloc(p_dcb);
p_tbl->id = id;
p_tbl->cfg_flags= MCA_L2C_CFG_CONN_ACP;
p_chnl_cfg = p_dcb->p_chnl_cfg;
/* assume that control channel has verified the security requirement */
/* Set the FCR options: control channel mandates ERTM */
ertm_info.preferred_mode = p_chnl_cfg->fcr_opt.mode;
ertm_info.allowed_modes = (1 << p_chnl_cfg->fcr_opt.mode);
ertm_info.user_rx_pool_id = p_chnl_cfg->user_rx_pool_id;
ertm_info.user_tx_pool_id = p_chnl_cfg->user_tx_pool_id;
ertm_info.fcr_rx_pool_id = p_chnl_cfg->fcr_rx_pool_id;
ertm_info.fcr_tx_pool_id = p_chnl_cfg->fcr_tx_pool_id;
p_ertm_info = &ertm_info;
result = L2CAP_CONN_OK;
}
else
{
/* else we're not listening for traffic channel; reject
* (this error code is specified by MCAP spec) */
result = L2CAP_CONN_NO_RESOURCES;
}
/* Send L2CAP connect rsp */
L2CA_ErtmConnectRsp (bd_addr, id, lcid, result, result, p_ertm_info);
/* if result ok, proceed with connection */
if (result == L2CAP_CONN_OK)
{
/* transition to configuration state */
p_tbl->state = MCA_TC_ST_CFG;
/* Send L2CAP config req */
mca_set_cfg_by_tbl (&cfg, p_tbl);
L2CA_ConfigReq(lcid, &cfg);
}
}
/*******************************************************************************
**
** Function mca_l2c_connect_cfm_cback
**
** Description This is the L2CAP connect confirm callback function.
**
**
** Returns void
**
*******************************************************************************/
void mca_l2c_connect_cfm_cback(UINT16 lcid, UINT16 result)
{
tMCA_TC_TBL *p_tbl;
tL2CAP_CFG_INFO cfg;
tMCA_CCB *p_ccb;
MCA_TRACE_DEBUG("mca_l2c_connect_cfm_cback lcid: x%x, result: %d",
lcid, result);
/* look up info for this channel */
if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
{
MCA_TRACE_DEBUG("p_tbl state: %d, tcid: %d", p_tbl->state, p_tbl->tcid);
/* if in correct state */
if (p_tbl->state == MCA_TC_ST_CONN)
{
/* if result successful */
if (result == L2CAP_CONN_OK)
{
if (p_tbl->tcid != 0)
{
/* set channel state */
p_tbl->state = MCA_TC_ST_CFG;
/* Send L2CAP config req */
mca_set_cfg_by_tbl (&cfg, p_tbl);
L2CA_ConfigReq(lcid, &cfg);
}
else
{
p_ccb = mca_ccb_by_hdl((tMCA_CL)p_tbl->cb_idx);
if (p_ccb == NULL)
{
result = L2CAP_CONN_NO_RESOURCES;
}
else
{
/* set channel state */
p_tbl->state = MCA_TC_ST_SEC_INT;
p_tbl->lcid = lcid;
p_tbl->cfg_flags= MCA_L2C_CFG_CONN_INT;
/* Check the security */
btm_sec_mx_access_request (p_ccb->peer_addr, p_ccb->ctrl_vpsm,
TRUE, BTM_SEC_PROTO_MCA,
p_tbl->tcid,
&mca_sec_check_complete_orig, p_tbl);
}
}
}
/* failure; notify adaption that channel closed */
if (result != L2CAP_CONN_OK)
{
p_tbl->cfg_flags |= MCA_L2C_CFG_DISCN_INT;
mca_tc_close_ind(p_tbl, result);
}
}
}
}
/*******************************************************************************
**
** Function mca_l2c_config_cfm_cback
**
** Description This is the L2CAP config confirm callback function.
**
**
** Returns void
**
*******************************************************************************/
void mca_l2c_config_cfm_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg)
{
tMCA_TC_TBL *p_tbl;
/* look up info for this channel */
if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
{
/* if in correct state */
if (p_tbl->state == MCA_TC_ST_CFG)
{
/* if result successful */
if (p_cfg->result == L2CAP_CONN_OK)
{
/* update cfg_flags */
p_tbl->cfg_flags |= MCA_L2C_CFG_CFM_DONE;
/* if configuration complete */
if (p_tbl->cfg_flags & MCA_L2C_CFG_IND_DONE)
{
mca_tc_open_ind(p_tbl);
}
}
/* else failure */
else
{
/* Send L2CAP disconnect req */
L2CA_DisconnectReq(lcid);
}
}
}
}
/*******************************************************************************
**
** Function mca_l2c_config_ind_cback
**
** Description This is the L2CAP config indication callback function.
**
**
** Returns void
**
*******************************************************************************/
void mca_l2c_config_ind_cback(UINT16 lcid, tL2CAP_CFG_INFO *p_cfg)
{
tMCA_TC_TBL *p_tbl;
UINT16 result = L2CAP_CFG_OK;
/* look up info for this channel */
if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
{
/* store the mtu in tbl */
if (p_cfg->mtu_present)
{
p_tbl->peer_mtu = p_cfg->mtu;
if (p_tbl->peer_mtu < MCA_MIN_MTU)
{
result = L2CAP_CFG_UNACCEPTABLE_PARAMS;
}
}
else
{
p_tbl->peer_mtu = L2CAP_DEFAULT_MTU;
}
MCA_TRACE_DEBUG("peer_mtu: %d, lcid: x%x mtu_present:%d",p_tbl->peer_mtu, lcid, p_cfg->mtu_present);
/* send L2CAP configure response */
memset(p_cfg, 0, sizeof(tL2CAP_CFG_INFO));
p_cfg->result = result;
L2CA_ConfigRsp(lcid, p_cfg);
/* if first config ind */
if ((p_tbl->cfg_flags & MCA_L2C_CFG_IND_DONE) == 0)
{
/* update cfg_flags */
p_tbl->cfg_flags |= MCA_L2C_CFG_IND_DONE;
/* if configuration complete */
if (p_tbl->cfg_flags & MCA_L2C_CFG_CFM_DONE)
{
mca_tc_open_ind(p_tbl);
}
}
}
}
/*******************************************************************************
**
** Function mca_l2c_disconnect_ind_cback
**
** Description This is the L2CAP disconnect indication callback function.
**
**
** Returns void
**
*******************************************************************************/
void mca_l2c_disconnect_ind_cback(UINT16 lcid, BOOLEAN ack_needed)
{
tMCA_TC_TBL *p_tbl;
UINT16 reason = L2CAP_DISC_TIMEOUT;
MCA_TRACE_DEBUG("mca_l2c_disconnect_ind_cback lcid: %d, ack_needed: %d",
lcid, ack_needed);
/* look up info for this channel */
if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
{
if (ack_needed)
{
/* send L2CAP disconnect response */
L2CA_DisconnectRsp(lcid);
}
p_tbl->cfg_flags = MCA_L2C_CFG_DISCN_ACP;
if (ack_needed)
reason = L2CAP_DISC_OK;
mca_tc_close_ind(p_tbl, reason);
}
}
/*******************************************************************************
**
** Function mca_l2c_disconnect_cfm_cback
**
** Description This is the L2CAP disconnect confirm callback function.
**
**
** Returns void
**
*******************************************************************************/
void mca_l2c_disconnect_cfm_cback(UINT16 lcid, UINT16 result)
{
tMCA_TC_TBL *p_tbl;
MCA_TRACE_DEBUG("mca_l2c_disconnect_cfm_cback lcid: x%x, result: %d",
lcid, result);
/* look up info for this channel */
if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
{
p_tbl->cfg_flags = MCA_L2C_CFG_DISCN_INT;
mca_tc_close_ind(p_tbl, result);
}
}
/*******************************************************************************
**
** Function mca_l2c_congestion_ind_cback
**
** Description This is the L2CAP congestion indication callback function.
**
**
** Returns void
**
*******************************************************************************/
void mca_l2c_congestion_ind_cback(UINT16 lcid, BOOLEAN is_congested)
{
tMCA_TC_TBL *p_tbl;
/* look up info for this channel */
if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
{
mca_tc_cong_ind(p_tbl, is_congested);
}
}
/*******************************************************************************
**
** Function mca_l2c_data_ind_cback
**
** Description This is the L2CAP data indication callback function.
**
**
** Returns void
**
*******************************************************************************/
void mca_l2c_data_ind_cback(UINT16 lcid, BT_HDR *p_buf)
{
tMCA_TC_TBL *p_tbl;
/* look up info for this channel */
if ((p_tbl = mca_tc_tbl_by_lcid(lcid)) != NULL)
{
mca_tc_data_ind(p_tbl, p_buf);
}
else /* prevent buffer leak */
GKI_freebuf(p_buf);
}
/*******************************************************************************
**
** Function mca_l2c_open_req
**
** Description This function calls L2CA_ConnectReq() to initiate a L2CAP channel.
**
** Returns void.
**
*******************************************************************************/
UINT16 mca_l2c_open_req(BD_ADDR bd_addr, UINT16 psm, const tMCA_CHNL_CFG *p_chnl_cfg)
{
tL2CAP_ERTM_INFO ertm_info;
if (p_chnl_cfg)
{
ertm_info.preferred_mode = p_chnl_cfg->fcr_opt.mode;
ertm_info.allowed_modes = (1 << p_chnl_cfg->fcr_opt.mode);
ertm_info.user_rx_pool_id = p_chnl_cfg->user_rx_pool_id;
ertm_info.user_tx_pool_id = p_chnl_cfg->user_tx_pool_id;
ertm_info.fcr_rx_pool_id = p_chnl_cfg->fcr_rx_pool_id;
ertm_info.fcr_tx_pool_id = p_chnl_cfg->fcr_tx_pool_id;
}
else
{
ertm_info.preferred_mode = mca_l2c_fcr_opts_def.mode;
ertm_info.allowed_modes = L2CAP_FCR_CHAN_OPT_ERTM;
ertm_info.user_rx_pool_id = MCA_USER_RX_POOL_ID;
ertm_info.user_tx_pool_id = MCA_USER_TX_POOL_ID;
ertm_info.fcr_rx_pool_id = MCA_FCR_RX_POOL_ID;
ertm_info.fcr_tx_pool_id = MCA_FCR_TX_POOL_ID;
}
return L2CA_ErtmConnectReq (psm, bd_addr, &ertm_info);
}