#include "wifi_hal.h"
#ifndef __WIFI_HAL_LOGGER_H
#define __WIFI_HAL_LOGGER_H
#ifdef __cplusplus
extern "C"
{
#endif /* __cplusplus */
#define LOGGER_MAJOR_VERSION 1
#define LOGGER_MINOR_VERSION 0
#define LOGGER_MICRO_VERSION 0
/**
* WiFi logger life cycle is as follow:
*
* - At initialization time, framework will call wifi_get_ring_buffers_status
* so as to obtain the names and list of supported buffers.
* - When WiFi operation start framework will call wifi_start_logging
* so as to trigger log collection.
* - Developper UI will provide an option to the user, so as it can set the verbose level
* of individual buffer as reported by wifi_get_ring_buffers_status.
* - During wifi operations, driver will periodically report per ring data to framework
* by invoking the on_ring_buffer_data call back.
* - when capturing a bug report, framework will indicate to driver that all the data
* has to be uploaded, urgently, by calling wifi_get_ring_data.
*
* The data uploaded by driver will be stored by framework in separate files, with one stream
* of file per ring.
* Framework will store the files in pcapng format, allowing for easy merging and parsing
* with network analyzer tools.
*/
typedef int wifi_radio;
typedef int wifi_ring_buffer_id;
#define PER_PACKET_ENTRY_FLAGS_DIRECTION_TX 1 // 0: TX, 1: RX
#define PER_PACKET_ENTRY_FLAGS_TX_SUCCESS 2 // whether packet was transmitted or
// received/decrypted successfully
#define PER_PACKET_ENTRY_FLAGS_80211_HEADER 4 // has full 802.11 header, else has 802.3 header
#define PER_PACKET_ENTRY_FLAGS_PROTECTED 8 // whether packet was encrypted
typedef struct {
u8 flags;
u8 tid; // transmit or received tid
u16 MCS; // modulation and bandwidth
u8 rssi; // TX: RSSI of ACK for that packet
// RX: RSSI of packet
u8 num_retries; // number of attempted retries
u16 last_transmit_rate; // last transmit rate in .5 mbps
u16 link_layer_transmit_sequence; // transmit/reeive sequence for that MPDU packet
u64 firmware_entry_timestamp; // TX: firmware timestamp (us) when packet is queued within
// firmware buffer for SDIO/HSIC or into PCIe buffer
// RX: firmware receive timestamp
u64 start_contention_timestamp; // firmware timestamp (us) when packet start contending for the
// medium for the first time, at head of its AC queue,
// or as part of an MPDU or A-MPDU. This timestamp is
// not updated for each retry, only the first transmit attempt.
u64 transmit_success_timestamp; // fimrware timestamp (us) when packet is successfully
// transmitted or aborted because it has exhausted
// its maximum number of retries.
u8 data[0]; // packet data. The length of packet data is determined by the entry_size field of
// the wifi_ring_buffer_entry structure. It is expected that first bytes of the
// packet, or packet headers only (up to TCP or RTP/UDP headers)
// will be copied into the ring
} __attribute__((packed)) wifi_ring_per_packet_status_entry;
/* Below events refer to the wifi_connectivity_event ring and shall be supported */
#define WIFI_EVENT_ASSOCIATION_REQUESTED 0 // driver receives association command from kernel
#define WIFI_EVENT_AUTH_COMPLETE 1
#define WIFI_EVENT_ASSOC_COMPLETE 2
#define WIFI_EVENT_FW_AUTH_STARTED 3 // fw event indicating auth frames are sent
#define WIFI_EVENT_FW_ASSOC_STARTED 4 // fw event indicating assoc frames are sent
#define WIFI_EVENT_FW_RE_ASSOC_STARTED 5 // fw event indicating reassoc frames are sent
#define WIFI_EVENT_DRIVER_SCAN_REQUESTED 6
#define WIFI_EVENT_DRIVER_SCAN_RESULT_FOUND 7
#define WIFI_EVENT_DRIVER_SCAN_COMPLETE 8
#define WIFI_EVENT_G_SCAN_STARTED 9
#define WIFI_EVENT_G_SCAN_COMPLETE 10
#define WIFI_EVENT_DISASSOCIATION_REQUESTED 11
#define WIFI_EVENT_RE_ASSOCIATION_REQUESTED 12
#define WIFI_EVENT_ROAM_REQUESTED 13
#define WIFI_EVENT_BEACON_RECEIVED 14 // received beacon from AP (event enabled
// only in verbose mode)
#define WIFI_EVENT_ROAM_SCAN_STARTED 15 // firmware has triggered a roam scan (not g-scan)
#define WIFI_EVENT_ROAM_SCAN_COMPLETE 16 // firmware has completed a roam scan (not g-scan)
#define WIFI_EVENT_ROAM_SEARCH_STARTED 17 // firmware has started searching for roam
// candidates (with reason =xx)
#define WIFI_EVENT_ROAM_SEARCH_STOPPED 18 // firmware has stopped searching for roam
// candidates (with reason =xx)
#define WIFI_EVENT_CHANNEL_SWITCH_ANOUNCEMENT 20 // received channel switch anouncement from AP
#define WIFI_EVENT_FW_EAPOL_FRAME_TRANSMIT_START 21 // fw start transmit eapol frame, with
// EAPOL index 1-4
#define WIFI_EVENT_FW_EAPOL_FRAME_TRANSMIT_STOP 22 // fw gives up eapol frame, with rate,
// success/failure and number retries
#define WIFI_EVENT_DRIVER_EAPOL_FRAME_TRANSMIT_REQUESTED 23 // kernel queue EAPOL for transmission
// in driver with EAPOL index 1-4
#define WIFI_EVENT_FW_EAPOL_FRAME_RECEIVED 24 // with rate, regardless of the fact that
// EAPOL frame is accepted or rejected by fw
#define WIFI_EVENT_DRIVER_EAPOL_FRAME_RECEIVED 26 // with rate, and eapol index, driver has
// received EAPOL frame and will queue it up
// to wpa_supplicant
#define WIFI_EVENT_BLOCK_ACK_NEGOTIATION_COMPLETE 27 // with success/failure, parameters
#define WIFI_EVENT_BT_COEX_BT_SCO_START 28
#define WIFI_EVENT_BT_COEX_BT_SCO_STOP 29
#define WIFI_EVENT_BT_COEX_BT_SCAN_START 30 // for paging/scan etc., when BT starts transmiting
// twice per BT slot
#define WIFI_EVENT_BT_COEX_BT_SCAN_STOP 31
#define WIFI_EVENT_BT_COEX_BT_HID_START 32
#define WIFI_EVENT_BT_COEX_BT_HID_STOP 33
#define WIFI_EVENT_ROAM_AUTH_STARTED 34 // fw sends auth frame in roaming to next candidate
#define WIFI_EVENT_ROAM_AUTH_COMPLETE 35 // fw receive auth confirm from ap
#define WIFI_EVENT_ROAM_ASSOC_STARTED 36 // firmware sends assoc/reassoc frame in
// roaming to next candidate
#define WIFI_EVENT_ROAM_ASSOC_COMPLETE 37 // firmware receive assoc/reassoc confirm from ap
#define WIFI_EVENT_G_SCAN_STOP 38 // firmware sends stop G_SCAN
#define WIFI_EVENT_G_SCAN_CYCLE_STARTED 39 // firmware indicates G_SCAN scan cycle started
#define WIFI_EVENT_G_SCAN_CYCLE_COMPLETED 40 // firmware indicates G_SCAN scan cycle completed
#define WIFI_EVENT_G_SCAN_BUCKET_STARTED 41 // firmware indicates G_SCAN scan start
// for a particular bucket
#define WIFI_EVENT_G_SCAN_BUCKET_COMPLETED 42 // firmware indicates G_SCAN scan completed for
// for a particular bucket
#define WIFI_EVENT_G_SCAN_RESULTS_AVAILABLE 43 // Event received from firmware about G_SCAN scan
// results being available
#define WIFI_EVENT_G_SCAN_CAPABILITIES 44 // Event received from firmware with G_SCAN
// capabilities
#define WIFI_EVENT_ROAM_CANDIDATE_FOUND 45 // Event received from firmware when eligible
// candidate is found
#define WIFI_EVENT_ROAM_SCAN_CONFIG 46 // Event received from firmware when roam scan
// configuration gets enabled or disabled
#define WIFI_EVENT_AUTH_TIMEOUT 47 // firmware/driver timed out authentication
#define WIFI_EVENT_ASSOC_TIMEOUT 48 // firmware/driver timed out association
#define WIFI_EVENT_MEM_ALLOC_FAILURE 49 // firmware/driver encountered allocation failure
#define WIFI_EVENT_DRIVER_PNO_ADD 50 // driver added a PNO network in firmware
#define WIFI_EVENT_DRIVER_PNO_REMOVE 51 // driver removed a PNO network in firmware
#define WIFI_EVENT_DRIVER_PNO_NETWORK_FOUND 52 // driver received PNO networks
// found indication from firmware
#define WIFI_EVENT_DRIVER_PNO_SCAN_REQUESTED 53 // driver triggered a scan for PNO networks
#define WIFI_EVENT_DRIVER_PNO_SCAN_RESULT_FOUND 54 // driver received scan results
// of PNO networks
#define WIFI_EVENT_DRIVER_PNO_SCAN_COMPLETE 55 // driver updated scan results from
// PNO networks to cfg80211
/**
* Parameters of wifi logger events are TLVs
* Event parameters tags are defined as:
*/
#define WIFI_TAG_VENDOR_SPECIFIC 0 // take a byte stream as parameter
#define WIFI_TAG_BSSID 1 // takes a 6 bytes MAC address as parameter
#define WIFI_TAG_ADDR 2 // takes a 6 bytes MAC address as parameter
#define WIFI_TAG_SSID 3 // takes a 32 bytes SSID address as parameter
#define WIFI_TAG_STATUS 4 // takes an integer as parameter
#define WIFI_TAG_CHANNEL_SPEC 5 // takes one or more wifi_channel_spec as parameter
#define WIFI_TAG_WAKE_LOCK_EVENT 6 // takes a wake_lock_event struct as parameter
#define WIFI_TAG_ADDR1 7 // takes a 6 bytes MAC address as parameter
#define WIFI_TAG_ADDR2 8 // takes a 6 bytes MAC address as parameter
#define WIFI_TAG_ADDR3 9 // takes a 6 bytes MAC address as parameter
#define WIFI_TAG_ADDR4 10 // takes a 6 bytes MAC address as parameter
#define WIFI_TAG_TSF 11 // take a 64 bits TSF value as parameter
#define WIFI_TAG_IE 12 // take one or more specific 802.11 IEs parameter,
// IEs are in turn indicated in TLV format as per
// 802.11 spec
#define WIFI_TAG_INTERFACE 13 // take interface name as parameter
#define WIFI_TAG_REASON_CODE 14 // take a reason code as per 802.11 as parameter
#define WIFI_TAG_RATE_MBPS 15 // take a wifi rate in 0.5 mbps
#define WIFI_TAG_REQUEST_ID 16 // take an integer as parameter
#define WIFI_TAG_BUCKET_ID 17 // take an integer as parameter
#define WIFI_TAG_GSCAN_PARAMS 18 // takes a wifi_scan_cmd_params struct as parameter
#define WIFI_TAG_GSCAN_CAPABILITIES 19 // takes a wifi_gscan_capabilities struct as parameter
#define WIFI_TAG_SCAN_ID 20 // take an integer as parameter
#define WIFI_TAG_RSSI 21 // take an integer as parameter
#define WIFI_TAG_CHANNEL 22 // take an integer as parameter
#define WIFI_TAG_LINK_ID 23 // take an integer as parameter
#define WIFI_TAG_LINK_ROLE 24 // take an integer as parameter
#define WIFI_TAG_LINK_STATE 25 // take an integer as parameter
#define WIFI_TAG_LINK_TYPE 26 // take an integer as parameter
#define WIFI_TAG_TSCO 27 // take an integer as parameter
#define WIFI_TAG_RSCO 28 // take an integer as parameter
#define WIFI_TAG_EAPOL_MESSAGE_TYPE 29 // take an integer as parameter
// M1-1, M2-2, M3-3, M4-4
typedef struct {
u16 tag;
u16 length; // length of value
u8 value[0];
} __attribute__((packed)) tlv_log;
typedef struct {
u16 event;
tlv_log tlvs[0]; // separate parameter structure per event to be provided and optional data
// the event_data is expected to include an official android part, with some
// parameter as transmit rate, num retries, num scan result found etc...
// as well, event_data can include a vendor proprietary part which is
// understood by the developer only.
} __attribute__((packed)) wifi_ring_buffer_driver_connectivity_event;
/**
* Ring buffer name for power events ring. note that power event are extremely frequents
* and thus should be stored in their own ring/file so as not to clobber connectivity events.
*/
typedef struct {
int status; // 0 taken, 1 released
int reason; // reason why this wake lock is taken
char name[0]; // null terminated
} __attribute__((packed)) wake_lock_event;
typedef struct {
u16 event;
tlv_log tlvs[0];
} __attribute__((packed)) wifi_power_event;
/**
* This structure represent a logger entry within a ring buffer.
* Wifi driver are responsible to manage the ring buffer and write the debug
* information into those rings.
*
* In general, the debug entries can be used to store meaningful 802.11 information (SME, MLME,
* connection and packet statistics) as well as vendor proprietary data that is specific to a
* specific driver or chipset.
* Binary entries can be used so as to store packet data or vendor specific information and
* will be treated as blobs of data by android.
*
* A user land process will be started by framework so as to periodically retrieve the
* data logged by drivers into their ring buffer, store the data into log files and include
* the logs into android bugreports.
*/
enum {
RING_BUFFER_ENTRY_FLAGS_HAS_BINARY = (1 << (0)), // set for binary entries
RING_BUFFER_ENTRY_FLAGS_HAS_TIMESTAMP = (1 << (1)) // set if 64 bits timestamp is present
};
enum {
ENTRY_TYPE_CONNECT_EVENT = 1,
ENTRY_TYPE_PKT,
ENTRY_TYPE_WAKE_LOCK,
ENTRY_TYPE_POWER_EVENT,
ENTRY_TYPE_DATA
};
typedef struct {
u16 entry_size; // the size of payload excluding the header.
u8 flags;
u8 type; // entry type
u64 timestamp; // present if has_timestamp bit is set.
} __attribute__((packed)) wifi_ring_buffer_entry;
#define WIFI_RING_BUFFER_FLAG_HAS_BINARY_ENTRIES 0x00000001 // set if binary entries are present
#define WIFI_RING_BUFFER_FLAG_HAS_ASCII_ENTRIES 0x00000002 // set if ascii entries are present
/* ring buffer params */
/**
* written_bytes and read_bytes implement a producer consumer API
* hence written_bytes >= read_bytes
* a modulo arithmetic of the buffer size has to be applied to those counters:
* actual offset into ring buffer = written_bytes % ring_buffer_byte_size
*
*/
typedef struct {
u8 name[32];
u32 flags;
wifi_ring_buffer_id ring_id; // unique integer representing the ring
u32 ring_buffer_byte_size; // total memory size allocated for the buffer
u32 verbose_level; // verbose level for ring buffer
u32 written_bytes; // number of bytes that was written to the buffer by driver,
// monotonously increasing integer
u32 read_bytes; // number of bytes that was read from the buffer by user land,
// monotonously increasing integer
u32 written_records; // number of records that was written to the buffer by driver,
// monotonously increasing integer
} wifi_ring_buffer_status;
/**
* Callback for reporting ring data
*
* The ring buffer data collection is event based:
* - Driver calls on_ring_buffer_data when new records are available, the wifi_ring_buffer_status
* passed up to framework in the call back indicates to framework if more data is available in
* the ring buffer. It is not expected that driver will necessarily always empty the ring
* immediately as data is available, instead driver will report data every X seconds or if
* N bytes are available.
* - In the case where a bug report has to be captured, framework will require driver to upload
* all data immediately. This is indicated to driver when framework calls wifi_get_ringdata.
* When framework calls wifi_get_ring_data, driver will start sending all available data in the
* indicated ring by repeatedly invoking the on_ring_buffer_data callback.
*
* The callback is called by log handler whenever ring data comes in driver.
*/
typedef struct {
void (*on_ring_buffer_data) (char *ring_name, char *buffer, int buffer_size,
wifi_ring_buffer_status *status);
} wifi_ring_buffer_data_handler;
/**
* API to set the log handler for getting ring data
* - Only a single instance of log handler can be instantiated for each ring buffer.
*/
wifi_error wifi_set_log_handler(wifi_request_id id, wifi_interface_handle iface,
wifi_ring_buffer_data_handler handler);
/* API to reset the log handler */
wifi_error wifi_reset_log_handler(wifi_request_id id, wifi_interface_handle iface);
/**
* Callback for reporting FW dump
*
* The buffer data collection is event based such as FW health check or FW dump.
* The callback is called by alert handler.
*/
typedef struct {
void (*on_alert) (wifi_request_id id, char *buffer, int buffer_size, int err_code);
} wifi_alert_handler;
/*
* API to set the alert handler for the alert case in Wi-Fi Chip
* - Only a single instance of alert handler can be instantiated.
*/
wifi_error wifi_set_alert_handler(wifi_request_id id, wifi_interface_handle iface,
wifi_alert_handler handler);
/* API to reset the alert handler */
wifi_error wifi_reset_alert_handler(wifi_request_id id, wifi_interface_handle iface);
/* API for framework to indicate driver has to upload and drain all data of a given ring */
wifi_error wifi_get_ring_data(wifi_interface_handle iface, char *ring_name);
/**
* API to trigger the debug collection.
* Unless his API is invoked - logging is not triggered.
* - Verbose_level 0 corresponds to no collection,
* and it makes log handler stop by no more events from driver.
* - Verbose_level 1 correspond to normal log level, with minimal user impact.
* This is the default value.
* - Verbose_level 2 are enabled when user is lazily trying to reproduce a problem,
* wifi performances and power can be impacted but device should not otherwise be
* significantly impacted.
* - Verbose_level 3+ are used when trying to actively debug a problem.
*
* ring_name represent the name of the ring for which data collection shall start.
*
* flags: TBD parameter used to enable/disable specific events on a ring
* max_interval: maximum interval in seconds for driver to invoke on_ring_buffer_data,
* ignore if zero
* min_data_size: minimum data size in buffer for driver to invoke on_ring_buffer_data,
* ignore if zero
*/
wifi_error wifi_start_logging(wifi_interface_handle iface, u32 verbose_level, u32 flags,
u32 max_interval_sec, u32 min_data_size, char *ring_name);
/**
* API to get the status of all ring buffers supported by driver.
* - Caller is responsible to allocate / free ring buffer status.
* - Maximum no of ring buffer would be 10.
*/
wifi_error wifi_get_ring_buffers_status(wifi_interface_handle iface, u32 *num_rings,
wifi_ring_buffer_status *status);
/**
* Synchronous memory dump by user request.
* - Caller is responsible to store memory dump data into a local,
* e.g., /data/misc/wifi/memdump.bin
*/
typedef struct {
void (*on_firmware_memory_dump) (char *buffer, int buffer_size);
} wifi_firmware_memory_dump_handler;
/**
* API to collect a firmware memory dump for a given iface by async memdump event.
* - Triggered by Alerthandler, esp. when FW problem or FW health check happens
* - Caller is responsible to store fw dump data into a local,
* e.g., /data/misc/wifi/alertdump-1.bin
*/
wifi_error wifi_get_firmware_memory_dump(wifi_interface_handle iface,
wifi_firmware_memory_dump_handler handler);
/**
* API to collect a firmware version string.
* - Caller is responsible to allocate / free a buffer to retrieve firmware verion info.
* - Max string will be at most 256 bytes.
*/
wifi_error wifi_get_firmware_version(wifi_interface_handle iface, char *buffer, int buffer_size);
/**
* API to collect a driver version string.
* - Caller is responsible to allocate / free a buffer to retrieve driver verion info.
* - Max string will be at most 256 bytes.
*/
wifi_error wifi_get_driver_version(wifi_interface_handle iface, char *buffer, int buffer_size);
/* Feature set */
enum {
WIFI_LOGGER_MEMORY_DUMP_SUPPORTED = (1 << (0)), // Memory dump of FW
WIFI_LOGGER_PER_PACKET_TX_RX_STATUS_SUPPORTED = (1 << (1)), // PKT status
WIFI_LOGGER_CONNECT_EVENT_SUPPORTED = (1 << (2)), // Connectivity event
WIFI_LOGGER_POWER_EVENT_SUPPORTED = (1 << (3)), // POWER of Driver
WIFI_LOGGER_WAKE_LOCK_SUPPORTED = (1 << (4)), // WAKE LOCK of Driver
WIFI_LOGGER_VERBOSE_SUPPORTED = (1 << (5)), // verbose log of FW
WIFI_LOGGER_WATCHDOG_TIMER_SUPPORTED = (1 << (6)), // monitor the health of FW
WIFI_LOGGER_DRIVER_DUMP_SUPPORTED = (1 << (7)), // dumps driver state
WIFI_LOGGER_PACKET_FATE_SUPPORTED = (1 << (8)), // tracks connection packets' fate
};
/**
* API to retrieve the current supportive features.
* - An integer variable is enough to have bit mapping info by caller.
*/
wifi_error wifi_get_logger_supported_feature_set(wifi_interface_handle iface,
unsigned int *support);
typedef struct {
/* Buffer is to be allocated and freed by HAL implementation. */
void (*on_driver_memory_dump) (char *buffer, int buffer_size);
} wifi_driver_memory_dump_callbacks;
/**
API to collect driver state.
Framework will call this API soon before or after (but not
concurrently with) wifi_get_firmware_memory_dump(). Capturing
firmware and driver dumps is intended to help identify
inconsistent state between these components.
- In response to this call, HAL implementation should make one or
more calls to callbacks.on_driver_memory_dump(). Framework will
copy data out of the received |buffer|s, and concatenate the
contents thereof.
- HAL implemention will indicate completion of the driver memory
dump by returning from this call.
*/
wifi_error wifi_get_driver_memory_dump(
wifi_interface_handle iface,
wifi_driver_memory_dump_callbacks callbacks);
/* packet fate logs */
#define MD5_PREFIX_LEN 4
#define MAX_FATE_LOG_LEN 32
#define MAX_FRAME_LEN_ETHERNET 1518
#define MAX_FRAME_LEN_80211_MGMT 2352 // 802.11-2012 Fig. 8-34
typedef enum {
// Sent over air and ACKed.
TX_PKT_FATE_ACKED,
// Sent over air but not ACKed. (Normal for broadcast/multicast.)
TX_PKT_FATE_SENT,
// Queued within firmware, but not yet sent over air.
TX_PKT_FATE_FW_QUEUED,
// Dropped by firmware as invalid. E.g. bad source address, bad checksum,
// or invalid for current state.
TX_PKT_FATE_FW_DROP_INVALID,
// Dropped by firmware due to lack of buffer space.
TX_PKT_FATE_FW_DROP_NOBUFS,
// Dropped by firmware for any other reason. Includes frames that
// were sent by driver to firmware, but unaccounted for by
// firmware.
TX_PKT_FATE_FW_DROP_OTHER,
// Queued within driver, not yet sent to firmware.
TX_PKT_FATE_DRV_QUEUED,
// Dropped by driver as invalid. E.g. bad source address, or
// invalid for current state.
TX_PKT_FATE_DRV_DROP_INVALID,
// Dropped by driver due to lack of buffer space.
TX_PKT_FATE_DRV_DROP_NOBUFS,
// Dropped by driver for any other reason.
TX_PKT_FATE_DRV_DROP_OTHER,
} wifi_tx_packet_fate;
typedef enum {
// Valid and delivered to network stack (e.g., netif_rx()).
RX_PKT_FATE_SUCCESS,
// Queued within firmware, but not yet sent to driver.
RX_PKT_FATE_FW_QUEUED,
// Dropped by firmware due to host-programmable filters.
RX_PKT_FATE_FW_DROP_FILTER,
// Dropped by firmware as invalid. E.g. bad checksum, decrypt failed,
// or invalid for current state.
RX_PKT_FATE_FW_DROP_INVALID,
// Dropped by firmware due to lack of buffer space.
RX_PKT_FATE_FW_DROP_NOBUFS,
// Dropped by firmware for any other reason.
RX_PKT_FATE_FW_DROP_OTHER,
// Queued within driver, not yet delivered to network stack.
RX_PKT_FATE_DRV_QUEUED,
// Dropped by driver due to filter rules.
RX_PKT_FATE_DRV_DROP_FILTER,
// Dropped by driver as invalid. E.g. not permitted in current state.
RX_PKT_FATE_DRV_DROP_INVALID,
// Dropped by driver due to lack of buffer space.
RX_PKT_FATE_DRV_DROP_NOBUFS,
// Dropped by driver for any other reason.
RX_PKT_FATE_DRV_DROP_OTHER,
} wifi_rx_packet_fate;
typedef enum {
FRAME_TYPE_UNKNOWN,
FRAME_TYPE_ETHERNET_II,
FRAME_TYPE_80211_MGMT,
} frame_type;
typedef struct {
// The type of MAC-layer frame that this frame_info holds.
// - For data frames, use FRAME_TYPE_ETHERNET_II.
// - For management frames, use FRAME_TYPE_80211_MGMT.
// - If the type of the frame is unknown, use FRAME_TYPE_UNKNOWN.
frame_type payload_type;
// The number of bytes included in |frame_content|. If the frame
// contents are missing (e.g. RX frame dropped in firmware),
// |frame_len| should be set to 0.
size_t frame_len;
// Host clock when this frame was received by the driver (either
// outbound from the host network stack, or inbound from the
// firmware).
// - The timestamp should be taken from a clock which includes time
// the host spent suspended (e.g. ktime_get_boottime()).
// - If no host timestamp is available (e.g. RX frame was dropped in
// firmware), this field should be set to 0.
u32 driver_timestamp_usec;
// Firmware clock when this frame was received by the firmware
// (either outbound from the host, or inbound from a remote
// station).
// - The timestamp should be taken from a clock which includes time
// firmware spent suspended (if applicable).
// - If no firmware timestamp is available (e.g. TX frame was
// dropped by driver), this field should be set to 0.
// - Consumers of |frame_info| should _not_ assume any
// synchronization between driver and firmware clocks.
u32 firmware_timestamp_usec;
// Actual frame content.
// - Should be provided for TX frames originated by the host.
// - Should be provided for RX frames received by the driver.
// - Optionally provided for TX frames originated by firmware. (At
// discretion of HAL implementation.)
// - Optionally provided for RX frames dropped in firmware. (At
// discretion of HAL implementation.)
// - If frame content is not provided, |frame_len| should be set
// to 0.
union {
char ethernet_ii_bytes[MAX_FRAME_LEN_ETHERNET];
char ieee_80211_mgmt_bytes[MAX_FRAME_LEN_80211_MGMT];
} frame_content;
} frame_info;
typedef struct {
// Prefix of MD5 hash of |frame_inf.frame_content|. If frame
// content is not provided, prefix of MD5 hash over the same data
// that would be in frame_content, if frame content were provided.
char md5_prefix[MD5_PREFIX_LEN];
wifi_tx_packet_fate fate;
frame_info frame_inf;
} wifi_tx_report;
typedef struct {
// Prefix of MD5 hash of |frame_inf.frame_content|. If frame
// content is not provided, prefix of MD5 hash over the same data
// that would be in frame_content, if frame content were provided.
char md5_prefix[MD5_PREFIX_LEN];
wifi_rx_packet_fate fate;
frame_info frame_inf;
} wifi_rx_report;
/**
API to start packet fate monitoring.
- Once stared, monitoring should remain active until HAL is unloaded.
- When HAL is unloaded, all packet fate buffers should be cleared.
*/
wifi_error wifi_start_pkt_fate_monitoring(wifi_interface_handle handle);
/**
API to retrieve fates of outbound packets.
- HAL implementation should fill |tx_report_bufs| with fates of
_first_ min(n_requested_fates, actual packets) frames
transmitted for the most recent association. The fate reports
should follow the same order as their respective packets.
- HAL implementation may choose (but is not required) to include
reports for management frames.
- Packets reported by firmware, but not recognized by driver,
should be included. However, the ordering of the corresponding
reports is at the discretion of HAL implementation.
- Framework may call this API multiple times for the same association.
- Framework will ensure |n_requested_fates <= MAX_FATE_LOG_LEN|.
- Framework will allocate and free the referenced storage.
*/
wifi_error wifi_get_tx_pkt_fates(wifi_interface_handle handle,
wifi_tx_report *tx_report_bufs,
size_t n_requested_fates,
size_t *n_provided_fates);
/**
API to retrieve fates of inbound packets.
- HAL implementation should fill |rx_report_bufs| with fates of
_first_ min(n_requested_fates, actual packets) frames
received for the most recent association. The fate reports
should follow the same order as their respective packets.
- HAL implementation may choose (but is not required) to include
reports for management frames.
- Packets reported by firmware, but not recognized by driver,
should be included. However, the ordering of the corresponding
reports is at the discretion of HAL implementation.
- Framework may call this API multiple times for the same association.
- Framework will ensure |n_requested_fates <= MAX_FATE_LOG_LEN|.
- Framework will allocate and free the referenced storage.
*/
wifi_error wifi_get_rx_pkt_fates(wifi_interface_handle handle,
wifi_rx_report *rx_report_bufs,
size_t n_requested_fates,
size_t *n_provided_fates);
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /*__WIFI_HAL_STATS_ */