/* Copyright (c) 2012-2014, 2016, The Linux Foundation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of The Linux Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
// To remove
#include <cutils/properties.h>
// System dependencies
#include <pthread.h>
#include <errno.h>
#include <fcntl.h>
#include <stdlib.h>
#define IOCTL_H <SYSTEM_HEADER_PREFIX/ioctl.h>
#include IOCTL_H
// Camera dependencies
#include "cam_semaphore.h"
#include "mm_camera_dbg.h"
#include "mm_camera_sock.h"
#include "mm_camera_interface.h"
#include "mm_camera.h"
#define SET_PARM_BIT32(parm, parm_arr) \
(parm_arr[parm/32] |= (1<<(parm%32)))
#define GET_PARM_BIT32(parm, parm_arr) \
((parm_arr[parm/32]>>(parm%32))& 0x1)
/* internal function declare */
int32_t mm_camera_evt_sub(mm_camera_obj_t * my_obj,
uint8_t reg_flag);
int32_t mm_camera_enqueue_evt(mm_camera_obj_t *my_obj,
mm_camera_event_t *event);
/*===========================================================================
* FUNCTION : mm_camera_util_get_channel_by_handler
*
* DESCRIPTION: utility function to get a channel object from its handle
*
* PARAMETERS :
* @cam_obj: ptr to a camera object
* @handler: channel handle
*
* RETURN : ptr to a channel object.
* NULL if failed.
*==========================================================================*/
mm_channel_t * mm_camera_util_get_channel_by_handler(
mm_camera_obj_t * cam_obj,
uint32_t handler)
{
int i;
mm_channel_t *ch_obj = NULL;
for(i = 0; i < MM_CAMERA_CHANNEL_MAX; i++) {
if (handler == cam_obj->ch[i].my_hdl) {
ch_obj = &cam_obj->ch[i];
break;
}
}
return ch_obj;
}
/*===========================================================================
* FUNCTION : mm_camera_util_chip_is_a_family
*
* DESCRIPTION: utility function to check if the host is A family chip
*
* PARAMETERS :
*
* RETURN : TRUE if A family.
* FALSE otherwise.
*==========================================================================*/
uint8_t mm_camera_util_chip_is_a_family(void)
{
#ifdef USE_A_FAMILY
return TRUE;
#else
return FALSE;
#endif
}
/*===========================================================================
* FUNCTION : mm_camera_dispatch_app_event
*
* DESCRIPTION: dispatch event to apps who regitster for event notify
*
* PARAMETERS :
* @cmd_cb: ptr to a struct storing event info
* @user_data: user data ptr (camera object)
*
* RETURN : none
*==========================================================================*/
static void mm_camera_dispatch_app_event(mm_camera_cmdcb_t *cmd_cb,
void* user_data)
{
int i;
mm_camera_event_t *event = &cmd_cb->u.evt;
mm_camera_obj_t * my_obj = (mm_camera_obj_t *)user_data;
if (NULL != my_obj) {
mm_camera_cmd_thread_name(my_obj->evt_thread.threadName);
pthread_mutex_lock(&my_obj->cb_lock);
for(i = 0; i < MM_CAMERA_EVT_ENTRY_MAX; i++) {
if(my_obj->evt.evt[i].evt_cb) {
my_obj->evt.evt[i].evt_cb(
my_obj->my_hdl,
event,
my_obj->evt.evt[i].user_data);
}
}
pthread_mutex_unlock(&my_obj->cb_lock);
}
}
/*===========================================================================
* FUNCTION : mm_camera_event_notify
*
* DESCRIPTION: callback to handle event notify from kernel. This call will
* dequeue event from kernel.
*
* PARAMETERS :
* @user_data: user data ptr (camera object)
*
* RETURN : none
*==========================================================================*/
static void mm_camera_event_notify(void* user_data)
{
struct v4l2_event ev;
struct msm_v4l2_event_data *msm_evt = NULL;
int rc;
mm_camera_event_t evt;
memset(&evt, 0, sizeof(mm_camera_event_t));
mm_camera_obj_t *my_obj = (mm_camera_obj_t*)user_data;
if (NULL != my_obj) {
/* read evt */
memset(&ev, 0, sizeof(ev));
rc = ioctl(my_obj->ctrl_fd, VIDIOC_DQEVENT, &ev);
if (rc >= 0 && ev.id == MSM_CAMERA_MSM_NOTIFY) {
msm_evt = (struct msm_v4l2_event_data *)ev.u.data;
switch (msm_evt->command) {
case CAM_EVENT_TYPE_DAEMON_PULL_REQ:
evt.server_event_type = CAM_EVENT_TYPE_DAEMON_PULL_REQ;
mm_camera_enqueue_evt(my_obj, &evt);
break;
case CAM_EVENT_TYPE_MAP_UNMAP_DONE:
pthread_mutex_lock(&my_obj->evt_lock);
my_obj->evt_rcvd.server_event_type = msm_evt->command;
my_obj->evt_rcvd.status = msm_evt->status;
pthread_cond_signal(&my_obj->evt_cond);
pthread_mutex_unlock(&my_obj->evt_lock);
break;
case CAM_EVENT_TYPE_INT_TAKE_JPEG:
case CAM_EVENT_TYPE_INT_TAKE_RAW:
{
evt.server_event_type = msm_evt->command;
mm_camera_enqueue_evt(my_obj, &evt);
}
break;
case MSM_CAMERA_PRIV_SHUTDOWN:
{
LOGE("Camera Event DAEMON DIED received");
evt.server_event_type = CAM_EVENT_TYPE_DAEMON_DIED;
mm_camera_enqueue_evt(my_obj, &evt);
}
break;
case CAM_EVENT_TYPE_CAC_DONE:
{
evt.server_event_type = CAM_EVENT_TYPE_CAC_DONE;
mm_camera_enqueue_evt(my_obj, &evt);
}
break;
default:
break;
}
}
}
}
/*===========================================================================
* FUNCTION : mm_camera_enqueue_evt
*
* DESCRIPTION: enqueue received event into event queue to be processed by
* event thread.
*
* PARAMETERS :
* @my_obj : ptr to a camera object
* @event : event to be queued
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_enqueue_evt(mm_camera_obj_t *my_obj,
mm_camera_event_t *event)
{
int32_t rc = 0;
mm_camera_cmdcb_t *node = NULL;
node = (mm_camera_cmdcb_t *)malloc(sizeof(mm_camera_cmdcb_t));
if (NULL != node) {
memset(node, 0, sizeof(mm_camera_cmdcb_t));
node->cmd_type = MM_CAMERA_CMD_TYPE_EVT_CB;
node->u.evt = *event;
/* enqueue to evt cmd thread */
cam_queue_enq(&(my_obj->evt_thread.cmd_queue), node);
/* wake up evt cmd thread */
cam_sem_post(&(my_obj->evt_thread.cmd_sem));
} else {
LOGE("No memory for mm_camera_node_t");
rc = -1;
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_open
*
* DESCRIPTION: open a camera
*
* PARAMETERS :
* @my_obj : ptr to a camera object
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_open(mm_camera_obj_t *my_obj)
{
char dev_name[MM_CAMERA_DEV_NAME_LEN];
int32_t rc = 0;
int8_t n_try=MM_CAMERA_DEV_OPEN_TRIES;
uint8_t sleep_msec=MM_CAMERA_DEV_OPEN_RETRY_SLEEP;
int cam_idx = 0;
const char *dev_name_value = NULL;
int l_errno = 0;
LOGD("begin\n");
if (NULL == my_obj) {
goto on_error;
}
dev_name_value = mm_camera_util_get_dev_name(my_obj->my_hdl);
if (NULL == dev_name_value) {
goto on_error;
}
snprintf(dev_name, sizeof(dev_name), "/dev/%s",
dev_name_value);
sscanf(dev_name, "/dev/video%d", &cam_idx);
LOGD("dev name = %s, cam_idx = %d", dev_name, cam_idx);
do{
n_try--;
errno = 0;
my_obj->ctrl_fd = open(dev_name, O_RDWR | O_NONBLOCK);
l_errno = errno;
LOGD("ctrl_fd = %d, errno == %d", my_obj->ctrl_fd, l_errno);
if((my_obj->ctrl_fd >= 0) || (errno != EIO && errno != ETIMEDOUT) || (n_try <= 0 )) {
LOGH("opened, break out while loop");
break;
}
LOGE("Failed with %s error, retrying after %d milli-seconds",
strerror(errno), sleep_msec);
usleep(sleep_msec * 1000U);
}while (n_try > 0);
if (my_obj->ctrl_fd < 0) {
LOGE("cannot open control fd of '%s' (%s)\n",
dev_name, strerror(l_errno));
if (l_errno == EBUSY)
rc = -EUSERS;
else
rc = -1;
goto on_error;
}
/* open domain socket*/
n_try = MM_CAMERA_DEV_OPEN_TRIES;
do {
n_try--;
my_obj->ds_fd = mm_camera_socket_create(cam_idx, MM_CAMERA_SOCK_TYPE_UDP);
l_errno = errno;
LOGD("ds_fd = %d, errno = %d", my_obj->ds_fd, l_errno);
if((my_obj->ds_fd >= 0) || (n_try <= 0 )) {
LOGD("opened, break out while loop");
break;
}
LOGD("failed with I/O error retrying after %d milli-seconds",
sleep_msec);
usleep(sleep_msec * 1000U);
} while (n_try > 0);
if (my_obj->ds_fd < 0) {
LOGE("cannot open domain socket fd of '%s'(%s)\n",
dev_name, strerror(l_errno));
rc = -1;
goto on_error;
}
pthread_mutex_init(&my_obj->msg_lock, NULL);
pthread_mutex_init(&my_obj->cb_lock, NULL);
pthread_mutex_init(&my_obj->evt_lock, NULL);
pthread_cond_init(&my_obj->evt_cond, NULL);
LOGD("Launch evt Thread in Cam Open");
snprintf(my_obj->evt_thread.threadName, THREAD_NAME_SIZE, "CAM_Dispatch");
mm_camera_cmd_thread_launch(&my_obj->evt_thread,
mm_camera_dispatch_app_event,
(void *)my_obj);
/* launch event poll thread
* we will add evt fd into event poll thread upon user first register for evt */
LOGD("Launch evt Poll Thread in Cam Open");
snprintf(my_obj->evt_poll_thread.threadName, THREAD_NAME_SIZE, "CAM_evntPoll");
mm_camera_poll_thread_launch(&my_obj->evt_poll_thread,
MM_CAMERA_POLL_TYPE_EVT);
mm_camera_evt_sub(my_obj, TRUE);
/* unlock cam_lock, we need release global intf_lock in camera_open(),
* in order not block operation of other Camera in dual camera use case.*/
pthread_mutex_unlock(&my_obj->cam_lock);
LOGD("end (rc = %d)\n", rc);
return rc;
on_error:
if (NULL == dev_name_value) {
LOGE("Invalid device name\n");
rc = -1;
}
if (NULL == my_obj) {
LOGE("Invalid camera object\n");
rc = -1;
} else {
if (my_obj->ctrl_fd >= 0) {
close(my_obj->ctrl_fd);
my_obj->ctrl_fd = -1;
}
if (my_obj->ds_fd >= 0) {
mm_camera_socket_close(my_obj->ds_fd);
my_obj->ds_fd = -1;
}
}
/* unlock cam_lock, we need release global intf_lock in camera_open(),
* in order not block operation of other Camera in dual camera use case.*/
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_close
*
* DESCRIPTION: enqueue received event into event queue to be processed by
* event thread.
*
* PARAMETERS :
* @my_obj : ptr to a camera object
* @event : event to be queued
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_close(mm_camera_obj_t *my_obj)
{
LOGD("unsubscribe evt");
mm_camera_evt_sub(my_obj, FALSE);
LOGD("Close evt Poll Thread in Cam Close");
mm_camera_poll_thread_release(&my_obj->evt_poll_thread);
LOGD("Close evt cmd Thread in Cam Close");
mm_camera_cmd_thread_release(&my_obj->evt_thread);
if(my_obj->ctrl_fd >= 0) {
close(my_obj->ctrl_fd);
my_obj->ctrl_fd = -1;
}
if(my_obj->ds_fd >= 0) {
mm_camera_socket_close(my_obj->ds_fd);
my_obj->ds_fd = -1;
}
pthread_mutex_destroy(&my_obj->msg_lock);
pthread_mutex_destroy(&my_obj->cb_lock);
pthread_mutex_destroy(&my_obj->evt_lock);
pthread_cond_destroy(&my_obj->evt_cond);
pthread_mutex_unlock(&my_obj->cam_lock);
return 0;
}
/*===========================================================================
* FUNCTION : mm_camera_register_event_notify_internal
*
* DESCRIPTION: internal implementation for registering callback for event notify.
*
* PARAMETERS :
* @my_obj : ptr to a camera object
* @evt_cb : callback to be registered to handle event notify
* @user_data: user data ptr
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_register_event_notify_internal(mm_camera_obj_t *my_obj,
mm_camera_event_notify_t evt_cb,
void * user_data)
{
int i;
int rc = -1;
mm_camera_evt_obj_t *evt_array = NULL;
pthread_mutex_lock(&my_obj->cb_lock);
evt_array = &my_obj->evt;
if(evt_cb) {
/* this is reg case */
for(i = 0; i < MM_CAMERA_EVT_ENTRY_MAX; i++) {
if(evt_array->evt[i].user_data == NULL) {
evt_array->evt[i].evt_cb = evt_cb;
evt_array->evt[i].user_data = user_data;
evt_array->reg_count++;
rc = 0;
break;
}
}
} else {
/* this is unreg case */
for(i = 0; i < MM_CAMERA_EVT_ENTRY_MAX; i++) {
if(evt_array->evt[i].user_data == user_data) {
evt_array->evt[i].evt_cb = NULL;
evt_array->evt[i].user_data = NULL;
evt_array->reg_count--;
rc = 0;
break;
}
}
}
pthread_mutex_unlock(&my_obj->cb_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_register_event_notify
*
* DESCRIPTION: registering a callback for event notify.
*
* PARAMETERS :
* @my_obj : ptr to a camera object
* @evt_cb : callback to be registered to handle event notify
* @user_data: user data ptr
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_register_event_notify(mm_camera_obj_t *my_obj,
mm_camera_event_notify_t evt_cb,
void * user_data)
{
int rc = -1;
rc = mm_camera_register_event_notify_internal(my_obj,
evt_cb,
user_data);
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_qbuf
*
* DESCRIPTION: enqueue buffer back to kernel
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @buf : buf ptr to be enqueued
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_qbuf(mm_camera_obj_t *my_obj,
uint32_t ch_id,
mm_camera_buf_def_t *buf)
{
int rc = -1;
mm_channel_t * ch_obj = NULL;
ch_obj = mm_camera_util_get_channel_by_handler(my_obj, ch_id);
pthread_mutex_unlock(&my_obj->cam_lock);
/* we always assume qbuf will be done before channel/stream is fully stopped
* because qbuf is done within dataCB context
* in order to avoid deadlock, we are not locking ch_lock for qbuf */
if (NULL != ch_obj) {
rc = mm_channel_qbuf(ch_obj, buf);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_get_queued_buf_count
*
* DESCRIPTION: return queued buffer count
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @stream_id : stream id
*
* RETURN : queued buffer count
*==========================================================================*/
int32_t mm_camera_get_queued_buf_count(mm_camera_obj_t *my_obj,
uint32_t ch_id, uint32_t stream_id)
{
int rc = -1;
mm_channel_t * ch_obj = NULL;
uint32_t payload;
ch_obj = mm_camera_util_get_channel_by_handler(my_obj, ch_id);
payload = stream_id;
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_GET_STREAM_QUEUED_BUF_COUNT,
(void *)&payload,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_query_capability
*
* DESCRIPTION: query camera capability
*
* PARAMETERS :
* @my_obj: camera object
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_query_capability(mm_camera_obj_t *my_obj)
{
int32_t rc = 0;
struct v4l2_capability cap;
/* get camera capabilities */
memset(&cap, 0, sizeof(cap));
rc = ioctl(my_obj->ctrl_fd, VIDIOC_QUERYCAP, &cap);
if (rc != 0) {
LOGE("cannot get camera capabilities, rc = %d, errno %d",
rc, errno);
}
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_set_parms
*
* DESCRIPTION: set parameters per camera
*
* PARAMETERS :
* @my_obj : camera object
* @parms : ptr to a param struct to be set to server
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
* NOTE : Assume the parms struct buf is already mapped to server via
* domain socket. Corresponding fields of parameters to be set
* are already filled in by upper layer caller.
*==========================================================================*/
int32_t mm_camera_set_parms(mm_camera_obj_t *my_obj,
parm_buffer_t *parms)
{
int32_t rc = -1;
int32_t value = 0;
if (parms != NULL) {
rc = mm_camera_util_s_ctrl(my_obj->ctrl_fd, CAM_PRIV_PARM, &value);
}
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_get_parms
*
* DESCRIPTION: get parameters per camera
*
* PARAMETERS :
* @my_obj : camera object
* @parms : ptr to a param struct to be get from server
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
* NOTE : Assume the parms struct buf is already mapped to server via
* domain socket. Parameters to be get from server are already
* filled in by upper layer caller. After this call, corresponding
* fields of requested parameters will be filled in by server with
* detailed information.
*==========================================================================*/
int32_t mm_camera_get_parms(mm_camera_obj_t *my_obj,
parm_buffer_t *parms)
{
int32_t rc = -1;
int32_t value = 0;
if (parms != NULL) {
rc = mm_camera_util_g_ctrl(my_obj->ctrl_fd, CAM_PRIV_PARM, &value);
}
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_do_auto_focus
*
* DESCRIPTION: performing auto focus
*
* PARAMETERS :
* @camera_handle: camera handle
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
* NOTE : if this call success, we will always assume there will
* be an auto_focus event following up.
*==========================================================================*/
int32_t mm_camera_do_auto_focus(mm_camera_obj_t *my_obj)
{
int32_t rc = -1;
int32_t value = 0;
rc = mm_camera_util_s_ctrl(my_obj->ctrl_fd, CAM_PRIV_DO_AUTO_FOCUS, &value);
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_cancel_auto_focus
*
* DESCRIPTION: cancel auto focus
*
* PARAMETERS :
* @camera_handle: camera handle
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_cancel_auto_focus(mm_camera_obj_t *my_obj)
{
int32_t rc = -1;
int32_t value = 0;
rc = mm_camera_util_s_ctrl(my_obj->ctrl_fd, CAM_PRIV_CANCEL_AUTO_FOCUS, &value);
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_prepare_snapshot
*
* DESCRIPTION: prepare hardware for snapshot
*
* PARAMETERS :
* @my_obj : camera object
* @do_af_flag : flag indicating if AF is needed
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_prepare_snapshot(mm_camera_obj_t *my_obj,
int32_t do_af_flag)
{
int32_t rc = -1;
int32_t value = do_af_flag;
rc = mm_camera_util_s_ctrl(my_obj->ctrl_fd, CAM_PRIV_PREPARE_SNAPSHOT, &value);
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_start_zsl_snapshot
*
* DESCRIPTION: start zsl snapshot
*
* PARAMETERS :
* @my_obj : camera object
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_start_zsl_snapshot(mm_camera_obj_t *my_obj)
{
int32_t rc = -1;
int32_t value = 0;
rc = mm_camera_util_s_ctrl(my_obj->ctrl_fd,
CAM_PRIV_START_ZSL_SNAPSHOT, &value);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_stop_zsl_snapshot
*
* DESCRIPTION: stop zsl capture
*
* PARAMETERS :
* @my_obj : camera object
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_stop_zsl_snapshot(mm_camera_obj_t *my_obj)
{
int32_t rc = -1;
int32_t value;
rc = mm_camera_util_s_ctrl(my_obj->ctrl_fd,
CAM_PRIV_STOP_ZSL_SNAPSHOT, &value);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_flush
*
* DESCRIPTION: flush the current camera state and buffers
*
* PARAMETERS :
* @my_obj : camera object
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_flush(mm_camera_obj_t *my_obj)
{
int32_t rc = -1;
int32_t value;
rc = mm_camera_util_s_ctrl(my_obj->ctrl_fd,
CAM_PRIV_FLUSH, &value);
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_add_channel
*
* DESCRIPTION: add a channel
*
* PARAMETERS :
* @my_obj : camera object
* @attr : bundle attribute of the channel if needed
* @channel_cb : callback function for bundle data notify
* @userdata : user data ptr
*
* RETURN : uint32_t type of channel handle
* 0 -- invalid channel handle, meaning the op failed
* >0 -- successfully added a channel with a valid handle
* NOTE : if no bundle data notify is needed, meaning each stream in the
* channel will have its own stream data notify callback, then
* attr, channel_cb, and userdata can be NULL. In this case,
* no matching logic will be performed in channel for the bundling.
*==========================================================================*/
uint32_t mm_camera_add_channel(mm_camera_obj_t *my_obj,
mm_camera_channel_attr_t *attr,
mm_camera_buf_notify_t channel_cb,
void *userdata)
{
mm_channel_t *ch_obj = NULL;
uint8_t ch_idx = 0;
uint32_t ch_hdl = 0;
for(ch_idx = 0; ch_idx < MM_CAMERA_CHANNEL_MAX; ch_idx++) {
if (MM_CHANNEL_STATE_NOTUSED == my_obj->ch[ch_idx].state) {
ch_obj = &my_obj->ch[ch_idx];
break;
}
}
if (NULL != ch_obj) {
/* initialize channel obj */
memset(ch_obj, 0, sizeof(mm_channel_t));
ch_hdl = mm_camera_util_generate_handler(ch_idx);
ch_obj->my_hdl = ch_hdl;
ch_obj->state = MM_CHANNEL_STATE_STOPPED;
ch_obj->cam_obj = my_obj;
pthread_mutex_init(&ch_obj->ch_lock, NULL);
ch_obj->sessionid = my_obj->sessionid;
mm_channel_init(ch_obj, attr, channel_cb, userdata);
}
pthread_mutex_unlock(&my_obj->cam_lock);
return ch_hdl;
}
/*===========================================================================
* FUNCTION : mm_camera_del_channel
*
* DESCRIPTION: delete a channel by its handle
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
* NOTE : all streams in the channel should be stopped already before
* this channel can be deleted.
*==========================================================================*/
int32_t mm_camera_del_channel(mm_camera_obj_t *my_obj,
uint32_t ch_id)
{
int32_t rc = -1;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_DELETE,
NULL,
NULL);
pthread_mutex_destroy(&ch_obj->ch_lock);
memset(ch_obj, 0, sizeof(mm_channel_t));
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_get_bundle_info
*
* DESCRIPTION: query bundle info of the channel
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @bundle_info : bundle info to be filled in
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
* NOTE : all streams in the channel should be stopped already before
* this channel can be deleted.
*==========================================================================*/
int32_t mm_camera_get_bundle_info(mm_camera_obj_t *my_obj,
uint32_t ch_id,
cam_bundle_config_t *bundle_info)
{
int32_t rc = -1;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_GET_BUNDLE_INFO,
(void *)bundle_info,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_link_stream
*
* DESCRIPTION: link a stream into a channel
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @stream_id : stream that will be linked
* @linked_ch_id : channel in which the stream will be linked
*
* RETURN : uint32_t type of stream handle
* 0 -- invalid stream handle, meaning the op failed
* >0 -- successfully linked a stream with a valid handle
*==========================================================================*/
uint32_t mm_camera_link_stream(mm_camera_obj_t *my_obj,
uint32_t ch_id,
uint32_t stream_id,
uint32_t linked_ch_id)
{
uint32_t s_hdl = 0;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, linked_ch_id);
mm_channel_t * owner_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if ((NULL != ch_obj) && (NULL != owner_obj)) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
mm_camera_stream_link_t stream_link;
memset(&stream_link, 0, sizeof(mm_camera_stream_link_t));
stream_link.ch = owner_obj;
stream_link.stream_id = stream_id;
mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_LINK_STREAM,
(void*)&stream_link,
(void*)&s_hdl);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return s_hdl;
}
/*===========================================================================
* FUNCTION : mm_camera_add_stream
*
* DESCRIPTION: add a stream into a channel
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
*
* RETURN : uint32_t type of stream handle
* 0 -- invalid stream handle, meaning the op failed
* >0 -- successfully added a stream with a valid handle
*==========================================================================*/
uint32_t mm_camera_add_stream(mm_camera_obj_t *my_obj,
uint32_t ch_id)
{
uint32_t s_hdl = 0;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_ADD_STREAM,
NULL,
(void *)&s_hdl);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return s_hdl;
}
/*===========================================================================
* FUNCTION : mm_camera_del_stream
*
* DESCRIPTION: delete a stream by its handle
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @stream_id : stream handle
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
* NOTE : stream should be stopped already before it can be deleted.
*==========================================================================*/
int32_t mm_camera_del_stream(mm_camera_obj_t *my_obj,
uint32_t ch_id,
uint32_t stream_id)
{
int32_t rc = -1;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_DEL_STREAM,
(void *)&stream_id,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_start_zsl_snapshot_ch
*
* DESCRIPTION: starts zsl snapshot for specific channel
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_start_zsl_snapshot_ch(mm_camera_obj_t *my_obj,
uint32_t ch_id)
{
int32_t rc = -1;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_START_ZSL_SNAPSHOT,
NULL,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_stop_zsl_snapshot_ch
*
* DESCRIPTION: stops zsl snapshot for specific channel
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_stop_zsl_snapshot_ch(mm_camera_obj_t *my_obj,
uint32_t ch_id)
{
int32_t rc = -1;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_STOP_ZSL_SNAPSHOT,
NULL,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_config_stream
*
* DESCRIPTION: configure a stream
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @stream_id : stream handle
* @config : stream configuration
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_config_stream(mm_camera_obj_t *my_obj,
uint32_t ch_id,
uint32_t stream_id,
mm_camera_stream_config_t *config)
{
int32_t rc = -1;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
mm_evt_paylod_config_stream_t payload;
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
memset(&payload, 0, sizeof(mm_evt_paylod_config_stream_t));
payload.stream_id = stream_id;
payload.config = config;
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_CONFIG_STREAM,
(void *)&payload,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_start_channel
*
* DESCRIPTION: start a channel, which will start all streams in the channel
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_start_channel(mm_camera_obj_t *my_obj, uint32_t ch_id)
{
int32_t rc = -1;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_START,
NULL,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_stop_channel
*
* DESCRIPTION: stop a channel, which will stop all streams in the channel
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_stop_channel(mm_camera_obj_t *my_obj,
uint32_t ch_id)
{
int32_t rc = 0;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_STOP,
NULL,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_request_super_buf
*
* DESCRIPTION: for burst mode in bundle, reuqest certain amount of matched
* frames from superbuf queue
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @num_buf_requested : number of matched frames needed
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_request_super_buf(mm_camera_obj_t *my_obj,
uint32_t ch_id, mm_camera_req_buf_t *buf)
{
int32_t rc = -1;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if ((NULL != ch_obj) && (buf != NULL)) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
rc = mm_channel_fsm_fn(ch_obj, MM_CHANNEL_EVT_REQUEST_SUPER_BUF,
(void *)buf, NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_cancel_super_buf_request
*
* DESCRIPTION: for burst mode in bundle, cancel the reuqest for certain amount
* of matched frames from superbuf queue
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_cancel_super_buf_request(mm_camera_obj_t *my_obj, uint32_t ch_id)
{
int32_t rc = -1;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_CANCEL_REQUEST_SUPER_BUF,
NULL,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_flush_super_buf_queue
*
* DESCRIPTION: flush out all frames in the superbuf queue
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_flush_super_buf_queue(mm_camera_obj_t *my_obj, uint32_t ch_id,
uint32_t frame_idx)
{
int32_t rc = -1;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_FLUSH_SUPER_BUF_QUEUE,
(void *)&frame_idx,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_config_channel_notify
*
* DESCRIPTION: configures the channel notification mode
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @notify_mode : notification mode
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_config_channel_notify(mm_camera_obj_t *my_obj,
uint32_t ch_id,
mm_camera_super_buf_notify_mode_t notify_mode)
{
int32_t rc = -1;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_CONFIG_NOTIFY_MODE,
(void *)¬ify_mode,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_set_stream_parms
*
* DESCRIPTION: set parameters per stream
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @s_id : stream handle
* @parms : ptr to a param struct to be set to server
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
* NOTE : Assume the parms struct buf is already mapped to server via
* domain socket. Corresponding fields of parameters to be set
* are already filled in by upper layer caller.
*==========================================================================*/
int32_t mm_camera_set_stream_parms(mm_camera_obj_t *my_obj,
uint32_t ch_id,
uint32_t s_id,
cam_stream_parm_buffer_t *parms)
{
int32_t rc = -1;
mm_evt_paylod_set_get_stream_parms_t payload;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
memset(&payload, 0, sizeof(payload));
payload.stream_id = s_id;
payload.parms = parms;
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_SET_STREAM_PARM,
(void *)&payload,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_get_stream_parms
*
* DESCRIPTION: get parameters per stream
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @s_id : stream handle
* @parms : ptr to a param struct to be get from server
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
* NOTE : Assume the parms struct buf is already mapped to server via
* domain socket. Parameters to be get from server are already
* filled in by upper layer caller. After this call, corresponding
* fields of requested parameters will be filled in by server with
* detailed information.
*==========================================================================*/
int32_t mm_camera_get_stream_parms(mm_camera_obj_t *my_obj,
uint32_t ch_id,
uint32_t s_id,
cam_stream_parm_buffer_t *parms)
{
int32_t rc = -1;
mm_evt_paylod_set_get_stream_parms_t payload;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
memset(&payload, 0, sizeof(payload));
payload.stream_id = s_id;
payload.parms = parms;
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_GET_STREAM_PARM,
(void *)&payload,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_do_stream_action
*
* DESCRIPTION: request server to perform stream based action. Maybe removed later
* if the functionality is included in mm_camera_set_parms
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @s_id : stream handle
* @actions : ptr to an action struct buf to be performed by server
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
* NOTE : Assume the action struct buf is already mapped to server via
* domain socket. Actions to be performed by server are already
* filled in by upper layer caller.
*==========================================================================*/
int32_t mm_camera_do_stream_action(mm_camera_obj_t *my_obj,
uint32_t ch_id,
uint32_t stream_id,
void *actions)
{
int32_t rc = -1;
mm_evt_paylod_do_stream_action_t payload;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
memset(&payload, 0, sizeof(payload));
payload.stream_id = stream_id;
payload.actions = actions;
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_DO_STREAM_ACTION,
(void*)&payload,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_map_stream_buf
*
* DESCRIPTION: mapping stream buffer via domain socket to server
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @s_id : stream handle
* @buf_type : type of buffer to be mapped. could be following values:
* CAM_MAPPING_BUF_TYPE_STREAM_BUF
* CAM_MAPPING_BUF_TYPE_STREAM_INFO
* CAM_MAPPING_BUF_TYPE_OFFLINE_INPUT_BUF
* @buf_idx : index of buffer within the stream buffers, only valid if
* buf_type is CAM_MAPPING_BUF_TYPE_STREAM_BUF or
* CAM_MAPPING_BUF_TYPE_OFFLINE_INPUT_BUF
* @plane_idx : plane index. If all planes share the same fd,
* plane_idx = -1; otherwise, plean_idx is the
* index to plane (0..num_of_planes)
* @fd : file descriptor of the buffer
* @size : size of the buffer
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_map_stream_buf(mm_camera_obj_t *my_obj,
uint32_t ch_id,
uint32_t stream_id,
uint8_t buf_type,
uint32_t buf_idx,
int32_t plane_idx,
int fd,
size_t size)
{
int32_t rc = -1;
cam_buf_map_type payload;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
memset(&payload, 0, sizeof(payload));
payload.stream_id = stream_id;
payload.type = buf_type;
payload.frame_idx = buf_idx;
payload.plane_idx = plane_idx;
payload.fd = fd;
payload.size = size;
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_MAP_STREAM_BUF,
(void*)&payload,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_map_stream_bufs
*
* DESCRIPTION: mapping stream buffers via domain socket to server
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @buf_map_list : list of buffers to be mapped
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_map_stream_bufs(mm_camera_obj_t *my_obj,
uint32_t ch_id,
const cam_buf_map_type_list *buf_map_list)
{
int32_t rc = -1;
cam_buf_map_type_list payload;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
memcpy(&payload, buf_map_list, sizeof(payload));
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_MAP_STREAM_BUFS,
(void*)&payload,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_unmap_stream_buf
*
* DESCRIPTION: unmapping stream buffer via domain socket to server
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @s_id : stream handle
* @buf_type : type of buffer to be mapped. could be following values:
* CAM_MAPPING_BUF_TYPE_STREAM_BUF
* CAM_MAPPING_BUF_TYPE_STREAM_INFO
* CAM_MAPPING_BUF_TYPE_OFFLINE_INPUT_BUF
* @buf_idx : index of buffer within the stream buffers, only valid if
* buf_type is CAM_MAPPING_BUF_TYPE_STREAM_BUF or
* CAM_MAPPING_BUF_TYPE_OFFLINE_INPUT_BUF
* @plane_idx : plane index. If all planes share the same fd,
* plane_idx = -1; otherwise, plean_idx is the
* index to plane (0..num_of_planes)
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_unmap_stream_buf(mm_camera_obj_t *my_obj,
uint32_t ch_id,
uint32_t stream_id,
uint8_t buf_type,
uint32_t buf_idx,
int32_t plane_idx)
{
int32_t rc = -1;
cam_buf_unmap_type payload;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
memset(&payload, 0, sizeof(payload));
payload.stream_id = stream_id;
payload.type = buf_type;
payload.frame_idx = buf_idx;
payload.plane_idx = plane_idx;
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_UNMAP_STREAM_BUF,
(void*)&payload,
NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_evt_sub
*
* DESCRIPTION: subscribe/unsubscribe event notify from kernel
*
* PARAMETERS :
* @my_obj : camera object
* @reg_flag : 1 -- subscribe ; 0 -- unsubscribe
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_evt_sub(mm_camera_obj_t * my_obj,
uint8_t reg_flag)
{
int32_t rc = 0;
struct v4l2_event_subscription sub;
memset(&sub, 0, sizeof(sub));
sub.type = MSM_CAMERA_V4L2_EVENT_TYPE;
sub.id = MSM_CAMERA_MSM_NOTIFY;
if(FALSE == reg_flag) {
/* unsubscribe */
rc = ioctl(my_obj->ctrl_fd, VIDIOC_UNSUBSCRIBE_EVENT, &sub);
if (rc < 0) {
LOGE("unsubscribe event rc = %d, errno %d",
rc, errno);
return rc;
}
/* remove evt fd from the polling thraed when unreg the last event */
rc = mm_camera_poll_thread_del_poll_fd(&my_obj->evt_poll_thread,
my_obj->my_hdl,
mm_camera_sync_call);
} else {
rc = ioctl(my_obj->ctrl_fd, VIDIOC_SUBSCRIBE_EVENT, &sub);
if (rc < 0) {
LOGE("subscribe event rc = %d, errno %d",
rc, errno);
return rc;
}
/* add evt fd to polling thread when subscribe the first event */
rc = mm_camera_poll_thread_add_poll_fd(&my_obj->evt_poll_thread,
my_obj->my_hdl,
my_obj->ctrl_fd,
mm_camera_event_notify,
(void*)my_obj,
mm_camera_sync_call);
}
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_util_wait_for_event
*
* DESCRIPTION: utility function to wait for certain events
*
* PARAMETERS :
* @my_obj : camera object
* @evt_mask : mask for events to be waited. Any of event in the mask would
* trigger the wait to end
* @status : status of the event
*
* RETURN : none
*==========================================================================*/
void mm_camera_util_wait_for_event(mm_camera_obj_t *my_obj,
uint32_t evt_mask,
uint32_t *status)
{
int32_t rc = 0;
struct timespec ts;
pthread_mutex_lock(&my_obj->evt_lock);
while (!(my_obj->evt_rcvd.server_event_type & evt_mask)) {
clock_gettime(CLOCK_REALTIME, &ts);
ts.tv_sec += WAIT_TIMEOUT;
rc = pthread_cond_timedwait(&my_obj->evt_cond, &my_obj->evt_lock, &ts);
if (rc) {
LOGE("pthread_cond_timedwait of evt_mask 0x%x failed %d",
evt_mask, rc);
break;
}
}
if (!rc) {
*status = my_obj->evt_rcvd.status;
} else {
*status = MSM_CAMERA_STATUS_FAIL;
}
/* reset local storage for recieved event for next event */
memset(&my_obj->evt_rcvd, 0, sizeof(mm_camera_event_t));
pthread_mutex_unlock(&my_obj->evt_lock);
}
/*===========================================================================
* FUNCTION : mm_camera_util_bundled_sendmsg
*
* DESCRIPTION: utility function to send bundled msg via domain socket
*
* PARAMETERS :
* @my_obj : camera object
* @msg : message to be sent
* @buf_size : size of the message to be sent
* @sendfds : array of file descriptors to be sent
* @numfds : number of file descriptors to be sent
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_util_bundled_sendmsg(mm_camera_obj_t *my_obj,
void *msg,
size_t buf_size,
int sendfds[CAM_MAX_NUM_BUFS_PER_STREAM],
int numfds)
{
int32_t rc = -1;
uint32_t status;
/* need to lock msg_lock, since sendmsg until response back is deemed as one operation*/
pthread_mutex_lock(&my_obj->msg_lock);
if(mm_camera_socket_bundle_sendmsg(my_obj->ds_fd, msg, buf_size, sendfds, numfds) > 0) {
/* wait for event that mapping/unmapping is done */
mm_camera_util_wait_for_event(my_obj, CAM_EVENT_TYPE_MAP_UNMAP_DONE, &status);
if (MSM_CAMERA_STATUS_SUCCESS == status) {
rc = 0;
}
}
pthread_mutex_unlock(&my_obj->msg_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_util_sendmsg
*
* DESCRIPTION: utility function to send msg via domain socket
*
* PARAMETERS :
* @my_obj : camera object
* @msg : message to be sent
* @buf_size : size of the message to be sent
* @sendfd : >0 if any file descriptor need to be passed across process
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_util_sendmsg(mm_camera_obj_t *my_obj,
void *msg,
size_t buf_size,
int sendfd)
{
int32_t rc = -1;
uint32_t status;
/* need to lock msg_lock, since sendmsg until reposonse back is deemed as one operation*/
pthread_mutex_lock(&my_obj->msg_lock);
if(mm_camera_socket_sendmsg(my_obj->ds_fd, msg, buf_size, sendfd) > 0) {
/* wait for event that mapping/unmapping is done */
mm_camera_util_wait_for_event(my_obj, CAM_EVENT_TYPE_MAP_UNMAP_DONE, &status);
if (MSM_CAMERA_STATUS_SUCCESS == status) {
rc = 0;
}
}
pthread_mutex_unlock(&my_obj->msg_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_map_buf
*
* DESCRIPTION: mapping camera buffer via domain socket to server
*
* PARAMETERS :
* @my_obj : camera object
* @buf_type : type of buffer to be mapped. could be following values:
* CAM_MAPPING_BUF_TYPE_CAPABILITY
* CAM_MAPPING_BUF_TYPE_SETPARM_BUF
* CAM_MAPPING_BUF_TYPE_GETPARM_BUF
* @fd : file descriptor of the buffer
* @size : size of the buffer
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_map_buf(mm_camera_obj_t *my_obj,
uint8_t buf_type,
int fd,
size_t size)
{
int32_t rc = 0;
cam_sock_packet_t packet;
memset(&packet, 0, sizeof(cam_sock_packet_t));
packet.msg_type = CAM_MAPPING_TYPE_FD_MAPPING;
packet.payload.buf_map.type = buf_type;
packet.payload.buf_map.fd = fd;
packet.payload.buf_map.size = size;
rc = mm_camera_util_sendmsg(my_obj,
&packet,
sizeof(cam_sock_packet_t),
fd);
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_map_bufs
*
* DESCRIPTION: mapping camera buffers via domain socket to server
*
* PARAMETERS :
* @my_obj : camera object
* @buf_map_list : list of buffers to be mapped
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_map_bufs(mm_camera_obj_t *my_obj,
const cam_buf_map_type_list* buf_map_list)
{
int32_t rc = 0;
cam_sock_packet_t packet;
memset(&packet, 0, sizeof(cam_sock_packet_t));
packet.msg_type = CAM_MAPPING_TYPE_FD_BUNDLED_MAPPING;
memcpy(&packet.payload.buf_map_list, buf_map_list,
sizeof(packet.payload.buf_map_list));
int sendfds[CAM_MAX_NUM_BUFS_PER_STREAM];
uint32_t numbufs = packet.payload.buf_map_list.length;
uint32_t i;
for (i = 0; i < numbufs; i++) {
sendfds[i] = packet.payload.buf_map_list.buf_maps[i].fd;
}
for (i = numbufs; i < CAM_MAX_NUM_BUFS_PER_STREAM; i++) {
packet.payload.buf_map_list.buf_maps[i].fd = -1;
sendfds[i] = -1;
}
rc = mm_camera_util_bundled_sendmsg(my_obj,
&packet,
sizeof(cam_sock_packet_t),
sendfds,
numbufs);
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_unmap_buf
*
* DESCRIPTION: unmapping camera buffer via domain socket to server
*
* PARAMETERS :
* @my_obj : camera object
* @buf_type : type of buffer to be mapped. could be following values:
* CAM_MAPPING_BUF_TYPE_CAPABILITY
* CAM_MAPPING_BUF_TYPE_SETPARM_BUF
* CAM_MAPPING_BUF_TYPE_GETPARM_BUF
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_unmap_buf(mm_camera_obj_t *my_obj,
uint8_t buf_type)
{
int32_t rc = 0;
cam_sock_packet_t packet;
memset(&packet, 0, sizeof(cam_sock_packet_t));
packet.msg_type = CAM_MAPPING_TYPE_FD_UNMAPPING;
packet.payload.buf_unmap.type = buf_type;
rc = mm_camera_util_sendmsg(my_obj,
&packet,
sizeof(cam_sock_packet_t),
-1);
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_util_s_ctrl
*
* DESCRIPTION: utility function to send v4l2 ioctl for s_ctrl
*
* PARAMETERS :
* @fd : file descritpor for sending ioctl
* @id : control id
* @value : value of the ioctl to be sent
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_util_s_ctrl(int32_t fd, uint32_t id, int32_t *value)
{
int rc = 0;
struct v4l2_control control;
memset(&control, 0, sizeof(control));
control.id = id;
if (value != NULL) {
control.value = *value;
}
rc = ioctl(fd, VIDIOC_S_CTRL, &control);
LOGD("fd=%d, S_CTRL, id=0x%x, value = %p, rc = %d\n",
fd, id, value, rc);
if (rc < 0) {
LOGE("ioctl failed %d, errno %d", rc, errno);
} else if (value != NULL) {
*value = control.value;
}
return (rc >= 0)? 0 : -1;
}
/*===========================================================================
* FUNCTION : mm_camera_util_g_ctrl
*
* DESCRIPTION: utility function to send v4l2 ioctl for g_ctrl
*
* PARAMETERS :
* @fd : file descritpor for sending ioctl
* @id : control id
* @value : value of the ioctl to be sent
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_util_g_ctrl( int32_t fd, uint32_t id, int32_t *value)
{
int rc = 0;
struct v4l2_control control;
memset(&control, 0, sizeof(control));
control.id = id;
if (value != NULL) {
control.value = *value;
}
rc = ioctl(fd, VIDIOC_G_CTRL, &control);
LOGD("fd=%d, G_CTRL, id=0x%x, rc = %d\n", fd, id, rc);
if (value != NULL) {
*value = control.value;
}
return (rc >= 0)? 0 : -1;
}
/*===========================================================================
* FUNCTION : mm_camera_channel_advanced_capture
*
* DESCRIPTION: sets the channel advanced capture
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @type : advanced capture type.
* @start_flag : flag to indicate start/stop
* @in_value : input configaration
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
*==========================================================================*/
int32_t mm_camera_channel_advanced_capture(mm_camera_obj_t *my_obj,
uint32_t ch_id, mm_camera_advanced_capture_t type,
uint32_t trigger, void *in_value)
{
LOGD("E type = %d", type);
int32_t rc = -1;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
switch (type) {
case MM_CAMERA_AF_BRACKETING:
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_AF_BRACKETING,
(void *)&trigger,
NULL);
break;
case MM_CAMERA_AE_BRACKETING:
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_AE_BRACKETING,
(void *)&trigger,
NULL);
break;
case MM_CAMERA_FLASH_BRACKETING:
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_FLASH_BRACKETING,
(void *)&trigger,
NULL);
break;
case MM_CAMERA_ZOOM_1X:
rc = mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_ZOOM_1X,
(void *)&trigger,
NULL);
break;
case MM_CAMERA_FRAME_CAPTURE:
rc = mm_channel_fsm_fn(ch_obj,
MM_CAMERA_EVT_CAPTURE_SETTING,
(void *)in_value,
NULL);
break;
default:
break;
}
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
LOGD("X");
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_get_session_id
*
* DESCRIPTION: get the session identity
*
* PARAMETERS :
* @my_obj : camera object
* @sessionid: pointer to the output session id
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
* NOTE : if this call succeeds, we will get a valid session id
*==========================================================================*/
int32_t mm_camera_get_session_id(mm_camera_obj_t *my_obj,
uint32_t* sessionid)
{
int32_t rc = -1;
int32_t value = 0;
if(sessionid != NULL) {
rc = mm_camera_util_g_ctrl(my_obj->ctrl_fd,
MSM_CAMERA_PRIV_G_SESSION_ID, &value);
LOGD("fd=%d, get_session_id, id=0x%x, value = %d, rc = %d\n",
my_obj->ctrl_fd, MSM_CAMERA_PRIV_G_SESSION_ID,
value, rc);
*sessionid = value;
my_obj->sessionid = value;
}
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_sync_related_sensors
*
* DESCRIPTION: send sync cmd
*
* PARAMETERS :
* @my_obj : camera object
* @parms : ptr to the related cam info to be sent to server
*
* RETURN : int32_t type of status
* 0 -- success
* -1 -- failure
* NOTE : Assume the sync struct buf is already mapped to server via
* domain socket. Corresponding fields of parameters to be set
* are already filled in by upper layer caller.
*==========================================================================*/
int32_t mm_camera_sync_related_sensors(mm_camera_obj_t *my_obj,
cam_sync_related_sensors_event_info_t* parms)
{
int32_t rc = -1;
int32_t value = 0;
if (parms != NULL) {
rc = mm_camera_util_s_ctrl(my_obj->ctrl_fd,
CAM_PRIV_SYNC_RELATED_SENSORS, &value);
}
pthread_mutex_unlock(&my_obj->cam_lock);
return rc;
}
/*===========================================================================
* FUNCTION : mm_camera_reg_stream_buf_cb
*
* DESCRIPTION: Register callback for stream buffer
*
* PARAMETERS :
* @my_obj : camera object
* @ch_id : channel handle
* @stream_id : stream that will be linked
* @buf_cb : special callback needs to be registered for stream buffer
* @cb_type : Callback type SYNC/ASYNC
* @userdata : user data pointer
*
* RETURN : int32_t type of status
* 0 -- success
* 1 -- failure
*==========================================================================*/
int32_t mm_camera_reg_stream_buf_cb(mm_camera_obj_t *my_obj,
uint32_t ch_id, uint32_t stream_id, mm_camera_buf_notify_t stream_cb,
mm_camera_stream_cb_type cb_type, void *userdata)
{
int rc = 0;
mm_stream_data_cb_t buf_cb;
mm_channel_t * ch_obj =
mm_camera_util_get_channel_by_handler(my_obj, ch_id);
if (NULL != ch_obj) {
pthread_mutex_lock(&ch_obj->ch_lock);
pthread_mutex_unlock(&my_obj->cam_lock);
memset(&buf_cb, 0, sizeof(mm_stream_data_cb_t));
buf_cb.cb = stream_cb;
buf_cb.cb_count = -1;
buf_cb.cb_type = cb_type;
buf_cb.user_data = userdata;
mm_evt_paylod_reg_stream_buf_cb payload;
memset(&payload, 0, sizeof(mm_evt_paylod_reg_stream_buf_cb));
payload.buf_cb = buf_cb;
payload.stream_id = stream_id;
mm_channel_fsm_fn(ch_obj,
MM_CHANNEL_EVT_REG_STREAM_BUF_CB,
(void*)&payload, NULL);
} else {
pthread_mutex_unlock(&my_obj->cam_lock);
}
return rc;
}
#ifdef QCAMERA_REDEFINE_LOG
/*===========================================================================
* DESCRIPTION: mm camera debug interface
*
*==========================================================================*/
pthread_mutex_t dbg_log_mutex;
#undef LOG_TAG
#define LOG_TAG "QCamera"
#define CDBG_MAX_STR_LEN 1024
#define CDBG_MAX_LINE_LENGTH 256
/* current trace loggin permissions
* {NONE, ERR, WARN, HIGH, DEBUG, LOW, INFO} */
int g_cam_log[CAM_LAST_MODULE][CAM_GLBL_DBG_INFO + 1] = {
{0, 1, 0, 0, 0, 0, 1}, /* CAM_NO_MODULE */
{0, 1, 0, 0, 0, 0, 1}, /* CAM_HAL_MODULE */
{0, 1, 0, 0, 0, 0, 1}, /* CAM_MCI_MODULE */
{0, 1, 0, 0, 0, 0, 1}, /* CAM_JPEG_MODULE */
};
/* string representation for logging level */
static const char *cam_dbg_level_to_str[] = {
"", /* CAM_GLBL_DBG_NONE */
"<ERROR>", /* CAM_GLBL_DBG_ERR */
"<WARN>", /* CAM_GLBL_DBG_WARN */
"<HIGH>", /* CAM_GLBL_DBG_HIGH */
"<DBG>", /* CAM_GLBL_DBG_DEBUG */
"<LOW>", /* CAM_GLBL_DBG_LOW */
"<INFO>" /* CAM_GLBL_DBG_INFO */
};
/* current trace logging configuration */
typedef struct {
cam_global_debug_level_t level;
int initialized;
const char *name;
const char *prop;
} module_debug_t;
static module_debug_t cam_loginfo[(int)CAM_LAST_MODULE] = {
{CAM_GLBL_DBG_ERR, 1,
"", "persist.camera.global.debug" }, /* CAM_NO_MODULE */
{CAM_GLBL_DBG_ERR, 1,
"<HAL>", "persist.camera.hal.debug" }, /* CAM_HAL_MODULE */
{CAM_GLBL_DBG_ERR, 1,
"<MCI>", "persist.camera.mci.debug" }, /* CAM_MCI_MODULE */
{CAM_GLBL_DBG_ERR, 1,
"<JPEG>", "persist.camera.mmstill.logs" }, /* CAM_JPEG_MODULE */
};
/** cam_get_dbg_level
*
* @module: module name
* @level: module debug logging level
*
* Maps debug log string to value.
*
* Return: logging level
**/
__unused
static cam_global_debug_level_t cam_get_dbg_level(const char *module,
char *pValue) {
cam_global_debug_level_t rc = CAM_GLBL_DBG_NONE;
if (!strcmp(pValue, "none")) {
rc = CAM_GLBL_DBG_NONE;
} else if (!strcmp(pValue, "warn")) {
rc = CAM_GLBL_DBG_WARN;
} else if (!strcmp(pValue, "debug")) {
rc = CAM_GLBL_DBG_DEBUG;
} else if (!strcmp(pValue, "error")) {
rc = CAM_GLBL_DBG_ERR;
} else if (!strcmp(pValue, "low")) {
rc = CAM_GLBL_DBG_LOW;
} else if (!strcmp(pValue, "high")) {
rc = CAM_GLBL_DBG_HIGH;
} else if (!strcmp(pValue, "info")) {
rc = CAM_GLBL_DBG_INFO;
} else {
ALOGE("Invalid %s debug log level %s\n", module, pValue);
}
ALOGD("%s debug log level: %s\n", module, cam_dbg_level_to_str[rc]);
return rc;
}
/** cam_vsnprintf
* @pdst: destination buffer pointer
* @size: size of destination b uffer
* @pfmt: string format
* @argptr: variabkle length argument list
*
* Processes variable length argument list to a formatted string.
*
* Return: n/a
**/
static void cam_vsnprintf(char* pdst, unsigned int size,
const char* pfmt, va_list argptr) {
int num_chars_written = 0;
pdst[0] = '\0';
num_chars_written = vsnprintf(pdst, size, pfmt, argptr);
if ((num_chars_written >= (int)size) && (size > 0)) {
/* Message length exceeds the buffer limit size */
num_chars_written = size - 1;
pdst[size - 1] = '\0';
}
}
/** mm_camera_debug_log
* @module: origin or log message
* @level: logging level
* @func: caller function name
* @line: caller line number
* @fmt: log message formatting string
* @...: variable argument list
*
* Generig logger method.
*
* Return: N/A
**/
void mm_camera_debug_log(const cam_modules_t module,
const cam_global_debug_level_t level,
const char *func, const int line, const char *fmt, ...) {
char str_buffer[CDBG_MAX_STR_LEN];
va_list args;
va_start(args, fmt);
cam_vsnprintf(str_buffer, CDBG_MAX_STR_LEN, fmt, args);
va_end(args);
switch (level) {
case CAM_GLBL_DBG_WARN:
ALOGW("%s%s %s: %d: %s", cam_loginfo[module].name,
cam_dbg_level_to_str[level], func, line, str_buffer);
break;
case CAM_GLBL_DBG_ERR:
ALOGE("%s%s %s: %d: %s", cam_loginfo[module].name,
cam_dbg_level_to_str[level], func, line, str_buffer);
break;
case CAM_GLBL_DBG_INFO:
ALOGI("%s%s %s: %d: %s", cam_loginfo[module].name,
cam_dbg_level_to_str[level], func, line, str_buffer);
break;
case CAM_GLBL_DBG_HIGH:
case CAM_GLBL_DBG_DEBUG:
case CAM_GLBL_DBG_LOW:
default:
ALOGD("%s%s %s: %d: %s", cam_loginfo[module].name,
cam_dbg_level_to_str[level], func, line, str_buffer);
}
}
/** mm_camera_set_dbg_log_properties
*
* Set global and module log level properties.
*
* Return: N/A
**/
void mm_camera_set_dbg_log_properties(void) {
int i;
unsigned int j;
static int boot_init = 1;
char property_value[PROPERTY_VALUE_MAX] = {0};
char default_value[PROPERTY_VALUE_MAX] = {0};
if (boot_init) {
boot_init = 0;
pthread_mutex_init(&dbg_log_mutex, 0);
}
/* set global and individual module logging levels */
pthread_mutex_lock(&dbg_log_mutex);
for (i = CAM_NO_MODULE; i < CAM_LAST_MODULE; i++) {
cam_global_debug_level_t log_level;
snprintf(default_value, PROPERTY_VALUE_MAX, "%d", (int)cam_loginfo[i].level);
property_get(cam_loginfo[i].prop, property_value, default_value);
log_level = (cam_global_debug_level_t)atoi(property_value);
/* fix KW warnings */
if (log_level > CAM_GLBL_DBG_INFO) {
log_level = CAM_GLBL_DBG_INFO;
}
cam_loginfo[i].level = log_level;
/* The logging macros will produce a log message when logging level for
* a module is less or equal to the level specified in the property for
* the module, or less or equal the level specified by the global logging
* property. Currently we don't allow INFO logging to be turned off */
for (j = CAM_GLBL_DBG_ERR; j <= CAM_GLBL_DBG_LOW; j++) {
g_cam_log[i][j] = (cam_loginfo[CAM_NO_MODULE].level != CAM_GLBL_DBG_NONE) &&
(cam_loginfo[i].level != CAM_GLBL_DBG_NONE) &&
((j <= cam_loginfo[i].level) ||
(j <= cam_loginfo[CAM_NO_MODULE].level));
}
}
pthread_mutex_unlock(&dbg_log_mutex);
}
#endif