/*
* Copyright 2001-2008 Texas Instruments - http://www.ti.com/
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* ======== errbase.h ========
* DSP-BIOS Bridge driver support functions for TI OMAP processors.
* Description:
* Central repository for DSP/BIOS Bridge error and status code.
*
* Error codes are of the form:
* [<MODULE>]_E<ERRORCODE>
*
* Success codes are of the form:
* [<MODULE>]_S<SUCCESSCODE>
*
*! Revision History:
*! ================
*! 24-Jan-2003 map Added DSP_SALREADYLOADED for persistent library checking
*! 23-Nov-2002 gp: Minor comment cleanup.
*! 13-May-2002 sg Added DSP_SALREADYASLEEP and DSP_SALREADYWAKE.
*! 18-Feb-2002 mk: Added DSP_EOVERLAYMEMORY, EFWRITE, ENOSECT.
*! 31-Jan-2002 mk: Added definitions of DSP_STRUE and DSP_SFALSE.
*! 29-Jan-2002 mk: Added definition of CFG_E_INSUFFICIENTBUFSIZE.
*! 24-Oct-2001 sp: Consolidated all the error codes into this file.
*! 24-Jul-2001 mk: Type-casted all definitions of WSX_STATUS types for
*! removal of compile warnings.
*! 22-Nov-1999 kc: Changes from code review.
*! 18-Aug-1999 rr: Ported From WSX.
*! 29-May-1996 gp: Removed WCD_ and WMD_ error ranges. Redefined format of
*! error codes.
*! 10-May-1996 gp: Created.
*/
#ifndef ERRBASE_
#define ERRBASE_
#ifdef __cplusplus
extern "C" {
#endif
/* ========================================================================== */
/* Base of generic errors and component errors */
/* ========================================================================== */
#define DSP_SBASE (DSP_STATUS)0x00008000
#define DSP_EBASE (DSP_STATUS)0x80008000
#define DSP_COMP_EBASE (DSP_STATUS)0x80040200
#define DSP_COMP_ELAST (DSP_STATUS)0x80047fff
/* ========================================================================== */
/* SUCCESS Codes */
/* ========================================================================== */
/* -------------------------------------------------------------------------- */
/* Generic success code */
/* -------------------------------------------------------------------------- */
#define DSP_SOK (DSP_SBASE + 0)
/* -------------------------------------------------------------------------- */
/* GPP is already attached to this DSP processor */
/* -------------------------------------------------------------------------- */
#define DSP_SALREADYATTACHED (DSP_SBASE + 1)
/* -------------------------------------------------------------------------- */
/* This is the last object available for enumeration. */
/* -------------------------------------------------------------------------- */
#define DSP_SENUMCOMPLETE (DSP_SBASE + 2)
/* -------------------------------------------------------------------------- */
/* The DSP is already asleep. */
/* -------------------------------------------------------------------------- */
#define DSP_SALREADYASLEEP (DSP_SBASE + 3)
/* -------------------------------------------------------------------------- */
/* The DSP is already awake. */
/* -------------------------------------------------------------------------- */
#define DSP_SALREADYAWAKE (DSP_SBASE + 4)
/* -------------------------------------------------------------------------- */
/* TRUE */
/* -------------------------------------------------------------------------- */
#define DSP_STRUE (DSP_SBASE + 5)
/* -------------------------------------------------------------------------- */
/* FALSE */
/* -------------------------------------------------------------------------- */
#define DSP_SFALSE (DSP_SBASE + 6)
/* -------------------------------------------------------------------------- */
/* A library contains no dependent library references */
/* -------------------------------------------------------------------------- */
#define DSP_SNODEPENDENTLIBS (DSP_SBASE + 7)
/* -------------------------------------------------------------------------- */
/* A persistent library is already loaded by the dynamic loader */
/* -------------------------------------------------------------------------- */
#define DSP_SALREADYLOADED (DSP_SBASE + 8)
/* -------------------------------------------------------------------------- */
/* Some error occured, but it is OK to continue */
/* -------------------------------------------------------------------------- */
#define DSP_OKTO_CONTINUE (DSP_SBASE + 9)
/* ========================================================================== */
/* FAILURE Codes */
/* ========================================================================== */
/* -------------------------------------------------------------------------- */
/* The caller does not have access privileges to call this function */
/* -------------------------------------------------------------------------- */
#define DSP_EACCESSDENIED (DSP_EBASE + 0)
/* -------------------------------------------------------------------------- */
/* The Specified Connection already exists */
/* -------------------------------------------------------------------------- */
#define DSP_EALREADYCONNECTED (DSP_EBASE + 1)
/* -------------------------------------------------------------------------- */
/* The GPP must be detached from the DSP before this function is called */
/* -------------------------------------------------------------------------- */
#define DSP_EATTACHED (DSP_EBASE + 2)
/* -------------------------------------------------------------------------- */
/* During enumeration a change in the number or properties of the objects */
/* has occurred. */
/* -------------------------------------------------------------------------- */
#define DSP_ECHANGEDURINGENUM (DSP_EBASE + 3)
/* -------------------------------------------------------------------------- */
/* An error occurred while parsing the DSP executable file */
/* -------------------------------------------------------------------------- */
#define DSP_ECORRUPTFILE (DSP_EBASE + 4)
/* -------------------------------------------------------------------------- */
/* A failure occurred during a delete operation */
/* -------------------------------------------------------------------------- */
#define DSP_EDELETE (DSP_EBASE + 5)
/* -------------------------------------------------------------------------- */
/* The specified direction is invalid */
/* -------------------------------------------------------------------------- */
#define DSP_EDIRECTION (DSP_EBASE + 6)
/* -------------------------------------------------------------------------- */
/* A stream has been issued the maximum number of buffers allowed in the */
/* stream at once ; buffers must be reclaimed from the stream before any */
/* more can be issued. */
/* -------------------------------------------------------------------------- */
#define DSP_ESTREAMFULL (DSP_EBASE + 7)
/* -------------------------------------------------------------------------- */
/* A general failure occurred */
/* -------------------------------------------------------------------------- */
#define DSP_EFAIL (DSP_EBASE + 8)
/* -------------------------------------------------------------------------- */
/* The specified executable file could not be found. */
/* -------------------------------------------------------------------------- */
#define DSP_EFILE (DSP_EBASE + 9)
/* -------------------------------------------------------------------------- */
/* The specified handle is invalid. */
/* -------------------------------------------------------------------------- */
#define DSP_EHANDLE (DSP_EBASE + 0xa)
/* -------------------------------------------------------------------------- */
/* An invalid argument was specified. */
/* -------------------------------------------------------------------------- */
#define DSP_EINVALIDARG (DSP_EBASE + 0xb)
/* -------------------------------------------------------------------------- */
/* A memory allocation failure occurred. */
/* -------------------------------------------------------------------------- */
#define DSP_EMEMORY (DSP_EBASE + 0xc)
/* -------------------------------------------------------------------------- */
/* The requested operation is invalid for this node type. */
/* -------------------------------------------------------------------------- */
#define DSP_ENODETYPE (DSP_EBASE + 0xd)
/* -------------------------------------------------------------------------- */
/* No error text was found for the specified error code. */
/* -------------------------------------------------------------------------- */
#define DSP_ENOERRTEXT (DSP_EBASE + 0xe)
/* -------------------------------------------------------------------------- */
/* No more connections can be made for this node. */
/* -------------------------------------------------------------------------- */
#define DSP_ENOMORECONNECTIONS (DSP_EBASE + 0xf)
/* -------------------------------------------------------------------------- */
/* The indicated operation is not supported. */
/* -------------------------------------------------------------------------- */
#define DSP_ENOTIMPL (DSP_EBASE + 0x10)
/* -------------------------------------------------------------------------- */
/* I/O is currently pending. */
/* -------------------------------------------------------------------------- */
#define DSP_EPENDING (DSP_EBASE + 0x11)
/* -------------------------------------------------------------------------- */
/* An invalid pointer was specified. */
/* -------------------------------------------------------------------------- */
#define DSP_EPOINTER (DSP_EBASE + 0x12)
/* -------------------------------------------------------------------------- */
/* A parameter is specified outside its valid range. */
/* -------------------------------------------------------------------------- */
#define DSP_ERANGE (DSP_EBASE + 0x13)
/* -------------------------------------------------------------------------- */
/* An invalid size parameter was specified. */
/* -------------------------------------------------------------------------- */
#define DSP_ESIZE (DSP_EBASE + 0x14)
/* -------------------------------------------------------------------------- */
/* A stream creation failure occurred on the DSP. */
/* -------------------------------------------------------------------------- */
#define DSP_ESTREAM (DSP_EBASE + 0x15)
/* -------------------------------------------------------------------------- */
/* A task creation failure occurred on the DSP. */
/* -------------------------------------------------------------------------- */
#define DSP_ETASK (DSP_EBASE + 0x16)
/* -------------------------------------------------------------------------- */
/* A timeout occurred before the requested operation could complete. */
/* -------------------------------------------------------------------------- */
#define DSP_ETIMEOUT (DSP_EBASE + 0x17)
/* -------------------------------------------------------------------------- */
/* A data truncation occurred, e.g., when requesting a descriptive error */
/* string, not enough space was allocated for the complete error message. */
/* -------------------------------------------------------------------------- */
#define DSP_ETRUNCATED (DSP_EBASE + 0x18)
/* -------------------------------------------------------------------------- */
/* A parameter is invalid. */
/* -------------------------------------------------------------------------- */
#define DSP_EVALUE (DSP_EBASE + 0x1a)
/* -------------------------------------------------------------------------- */
/* The state of the specified object is incorrect for the requested */
/* operation. */
/* -------------------------------------------------------------------------- */
#define DSP_EWRONGSTATE (DSP_EBASE + 0x1b)
/* -------------------------------------------------------------------------- */
/* Symbol not found in the COFF file. DSPNode_Create will return this if */
/* the iAlg function table for an xDAIS socket is not found in the COFF file. */
/* In this case, force the symbol to be linked into the COFF file. */
/* DSPNode_Create, DSPNode_Execute, and DSPNode_Delete will return this if */
/* the create, execute, or delete phase function, respectively, could not be */
/* found in the COFF file. */
/* -------------------------------------------------------------------------- */
#define DSP_ESYMBOL (DSP_EBASE + 0x1c)
/* -------------------------------------------------------------------------- */
/* UUID not found in registry. */
/* -------------------------------------------------------------------------- */
#define DSP_EUUID (DSP_EBASE + 0x1d)
/* -------------------------------------------------------------------------- */
/* Unable to read content of DCD data section ; this is typically caused by */
/* improperly configured nodes. */
/* -------------------------------------------------------------------------- */
#define DSP_EDCDREADSECT (DSP_EBASE + 0x1e)
/* -------------------------------------------------------------------------- */
/* Unable to decode DCD data section content ; this is typically caused by */
/* changes to DSP/BIOS Bridge data structures. */
/* -------------------------------------------------------------------------- */
#define DSP_EDCDPARSESECT (DSP_EBASE + 0x1f)
/* -------------------------------------------------------------------------- */
/* Unable to get pointer to DCD data section ; this is typically caused by */
/* improperly configured UUIDs. */
/* -------------------------------------------------------------------------- */
#define DSP_EDCDGETSECT (DSP_EBASE + 0x20)
/* -------------------------------------------------------------------------- */
/* Unable to load file containing DCD data section ; this is typically */
/* caused by a missing COFF file. */
/* -------------------------------------------------------------------------- */
#define DSP_EDCDLOADBASE (DSP_EBASE + 0x21)
/* -------------------------------------------------------------------------- */
/* The specified COFF file does not contain a valid node registration */
/* section. */
/* -------------------------------------------------------------------------- */
#define DSP_EDCDNOAUTOREGISTER (DSP_EBASE + 0x22)
/* -------------------------------------------------------------------------- */
/* A requested resource is not available. */
/* -------------------------------------------------------------------------- */
#define DSP_ERESOURCE (DSP_EBASE + 0x28)
/* -------------------------------------------------------------------------- */
/* A critical error has occurred, and the DSP is being re-started. */
/* -------------------------------------------------------------------------- */
#define DSP_ERESTART (DSP_EBASE + 0x29)
/* -------------------------------------------------------------------------- */
/* A DSP memory free operation failed. */
/* -------------------------------------------------------------------------- */
#define DSP_EFREE (DSP_EBASE + 0x2a)
/* -------------------------------------------------------------------------- */
/* A DSP I/O free operation failed. */
/* -------------------------------------------------------------------------- */
#define DSP_EIOFREE (DSP_EBASE + 0x2b)
/* -------------------------------------------------------------------------- */
/* Multiple instances are not allowed. */
/* -------------------------------------------------------------------------- */
#define DSP_EMULINST (DSP_EBASE + 0x2c)
/* -------------------------------------------------------------------------- */
/* A specified entity was not found. */
/* -------------------------------------------------------------------------- */
#define DSP_ENOTFOUND (DSP_EBASE + 0x2d)
/* -------------------------------------------------------------------------- */
/* A DSP I/O resource is not available. */
/* -------------------------------------------------------------------------- */
#define DSP_EOUTOFIO (DSP_EBASE + 0x2e)
/* -------------------------------------------------------------------------- */
/* A shared memory buffer contained in a message or stream could not be */
/* mapped to the GPP client process's virtual space. */
/* -------------------------------------------------------------------------- */
#define DSP_ETRANSLATE (DSP_EBASE + 0x2f)
/* -------------------------------------------------------------------------- */
/* File or section load write function failed to write to DSP */
/* -------------------------------------------------------------------------- */
#define DSP_EFWRITE (DSP_EBASE + 0x31)
/* -------------------------------------------------------------------------- */
/* Unable to find a named section in DSP executable */
/* -------------------------------------------------------------------------- */
#define DSP_ENOSECT (DSP_EBASE + 0x32)
/* -------------------------------------------------------------------------- */
/* Unable to open file */
/* -------------------------------------------------------------------------- */
#define DSP_EFOPEN (DSP_EBASE + 0x33)
/* -------------------------------------------------------------------------- */
/* Unable to read file */
/* -------------------------------------------------------------------------- */
#define DSP_EFREAD (DSP_EBASE + 0x34)
/* -------------------------------------------------------------------------- */
/* A non-existent memory segment identifier was specified */
/* -------------------------------------------------------------------------- */
#define DSP_EOVERLAYMEMORY (DSP_EBASE + 0x37)
/* -------------------------------------------------------------------------- */
/* Invalid segment ID */
/* -------------------------------------------------------------------------- */
#define DSP_EBADSEGID (DSP_EBASE + 0x38)
/* -------------------------------------------------------------------------- */
/* Invalid alignment */
/* -------------------------------------------------------------------------- */
#define DSP_EALIGNMENT (DSP_EBASE + 0x39)
/* -------------------------------------------------------------------------- */
/* Invalid stream mode */
/* -------------------------------------------------------------------------- */
#define DSP_ESTRMMODE (DSP_EBASE + 0x3a)
/* -------------------------------------------------------------------------- */
/* Nodes not connected */
/* -------------------------------------------------------------------------- */
#define DSP_ENOTCONNECTED (DSP_EBASE + 0x3b)
/* -------------------------------------------------------------------------- */
/* Not shared memory */
/* -------------------------------------------------------------------------- */
#define DSP_ENOTSHAREDMEM (DSP_EBASE + 0x3c)
/* -------------------------------------------------------------------------- */
/* Error occurred in a dynamic loader library function */
/* -------------------------------------------------------------------------- */
#define DSP_EDYNLOAD (DSP_EBASE + 0x3d)
/* -------------------------------------------------------------------------- */
/* Device in 'sleep/suspend' mode due to DPM */
/* -------------------------------------------------------------------------- */
#define DSP_EDPMSUSPEND (DSP_EBASE + 0x3e)
/* -------------------------------------------------------------------------- */
/* A node-specific error has occurred. */
/* -------------------------------------------------------------------------- */
#define DSP_EUSER1 (DSP_EBASE + 0x40)
#define DSP_EUSER2 (DSP_EBASE + 0x41)
#define DSP_EUSER3 (DSP_EBASE + 0x42)
#define DSP_EUSER4 (DSP_EBASE + 0x43)
#define DSP_EUSER5 (DSP_EBASE + 0x44)
#define DSP_EUSER6 (DSP_EBASE + 0x45)
#define DSP_EUSER7 (DSP_EBASE + 0x46)
#define DSP_EUSER8 (DSP_EBASE + 0x47)
#define DSP_EUSER9 (DSP_EBASE + 0x48)
#define DSP_EUSER10 (DSP_EBASE + 0x49)
#define DSP_EUSER11 (DSP_EBASE + 0x4a)
#define DSP_EUSER12 (DSP_EBASE + 0x4b)
#define DSP_EUSER13 (DSP_EBASE + 0x4c)
#define DSP_EUSER14 (DSP_EBASE + 0x4d)
#define DSP_EUSER15 (DSP_EBASE + 0x4e)
#define DSP_EUSER16 (DSP_EBASE + 0x4f)
/* ========================================================================== */
/* FAILURE Codes : DEV */
/* ========================================================================== */
#define DEV_EBASE (DSP_COMP_EBASE + 0x000)
/* -------------------------------------------------------------------------- */
/* The mini-driver expected a newer version of the class driver. */
/* -------------------------------------------------------------------------- */
#define DEV_E_NEWWMD (DEV_EBASE + 0x00)
/* -------------------------------------------------------------------------- */
/* WMD_DRV_Entry function returned a NULL function interface table. */
/* -------------------------------------------------------------------------- */
#define DEV_E_NULLWMDINTF (DEV_EBASE + 0x01)
/* ========================================================================== */
/* FAILURE Codes : LDR */
/* ========================================================================== */
#define LDR_EBASE (DSP_COMP_EBASE + 0x100)
/* -------------------------------------------------------------------------- */
/* Insufficient memory to export class driver services. */
/* -------------------------------------------------------------------------- */
#define LDR_E_NOMEMORY (LDR_EBASE + 0x00)
/* -------------------------------------------------------------------------- */
/* Unable to find WMD file in system directory. */
/* -------------------------------------------------------------------------- */
#define LDR_E_FILEUNABLETOOPEN (LDR_EBASE + 0x01)
/* ========================================================================== */
/* FAILURE Codes : CFG */
/* ========================================================================== */
#define CFG_EBASE (DSP_COMP_EBASE + 0x200)
/* -------------------------------------------------------------------------- */
/* Invalid pointer passed into a configuration module function */
/* -------------------------------------------------------------------------- */
#define CFG_E_INVALIDPOINTER (CFG_EBASE + 0x00)
/* -------------------------------------------------------------------------- */
/* Invalid device node handle passed into a configuration module function. */
/* -------------------------------------------------------------------------- */
#define CFG_E_INVALIDHDEVNODE (CFG_EBASE + 0x01)
/* -------------------------------------------------------------------------- */
/* Unable to retrieve resource information from the registry. */
/* -------------------------------------------------------------------------- */
#define CFG_E_RESOURCENOTAVAIL (CFG_EBASE + 0x02)
/* -------------------------------------------------------------------------- */
/* Unable to find board name key in registry. */
/* -------------------------------------------------------------------------- */
#define CFG_E_INVALIDBOARDNAME (CFG_EBASE + 0x03)
/* -------------------------------------------------------------------------- */
/* Unable to find a device node in registry with given unit number. */
/* -------------------------------------------------------------------------- */
#define CFG_E_INVALIDUNITNUM (CFG_EBASE + 0x04)
/* -------------------------------------------------------------------------- */
/* Insufficient buffer size */
/* -------------------------------------------------------------------------- */
#define CFG_E_INSUFFICIENTBUFSIZE (CFG_EBASE + 0x05)
/* ========================================================================== */
/* FAILURE Codes : BRD */
/* ========================================================================== */
#define BRD_EBASE (DSP_COMP_EBASE + 0x300)
/* -------------------------------------------------------------------------- */
/* Board client does not have sufficient access rights for this operation. */
/* -------------------------------------------------------------------------- */
#define BRD_E_ACCESSDENIED (BRD_EBASE + 0x00)
/* -------------------------------------------------------------------------- */
/* Unable to find trace buffer symbols in the DSP executable COFF file. */
/* -------------------------------------------------------------------------- */
#define BRD_E_NOTRACEBUFFER (BRD_EBASE + 0x01)
/* -------------------------------------------------------------------------- */
/* Attempted to auto-start board, but no default DSP executable configured. */
/* -------------------------------------------------------------------------- */
#define BRD_E_NOEXEC (BRD_EBASE + 0x02)
/* -------------------------------------------------------------------------- */
/* The operation failed because it was started from a wrong state */
/* -------------------------------------------------------------------------- */
#define BRD_E_WRONGSTATE (BRD_EBASE + 0x03)
/* ========================================================================== */
/* FAILURE Codes : COD */
/* ========================================================================== */
#define COD_EBASE (DSP_COMP_EBASE + 0x400)
/* -------------------------------------------------------------------------- */
/* No symbol table is loaded for this board. */
/* -------------------------------------------------------------------------- */
#define COD_E_NOSYMBOLSLOADED (COD_EBASE + 0x00)
/* -------------------------------------------------------------------------- */
/* Symbol not found in for this board. */
/* -------------------------------------------------------------------------- */
#define COD_E_SYMBOLNOTFOUND (COD_EBASE + 0x01)
/* -------------------------------------------------------------------------- */
/* ZL DLL module is not exporting the correct function interface. */
/* -------------------------------------------------------------------------- */
#define COD_E_NOZLFUNCTIONS (COD_EBASE + 0x02)
/* -------------------------------------------------------------------------- */
/* Unable to initialize the ZL COFF parsing module. */
/* -------------------------------------------------------------------------- */
#define COD_E_ZLCREATEFAILED (COD_EBASE + 0x03)
/* -------------------------------------------------------------------------- */
/* Unable to open DSP executable COFF file. */
/* -------------------------------------------------------------------------- */
#define COD_E_OPENFAILED (COD_EBASE + 0x04)
/* -------------------------------------------------------------------------- */
/* Unable to parse DSP executable COFF file. */
/* -------------------------------------------------------------------------- */
#define COD_E_LOADFAILED (COD_EBASE + 0x05)
/* -------------------------------------------------------------------------- */
/* Unable to read DSP executable COFF file. */
/* -------------------------------------------------------------------------- */
#define COD_E_READFAILED (COD_EBASE + 0x06)
/* ========================================================================== */
/* FAILURE Codes : CHNL */
/* ========================================================================== */
#define CHNL_EBASE (DSP_COMP_EBASE + 0x500)
/* -------------------------------------------------------------------------- */
/* Attempt to created channel manager with too many channels. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_MAXCHANNELS (CHNL_EBASE + 0x00)
/* -------------------------------------------------------------------------- */
/* No channel manager exists for this mini-driver. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_NOMGR (CHNL_EBASE + 0x01)
/* -------------------------------------------------------------------------- */
/* No free channels are available. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_OUTOFSTREAMS (CHNL_EBASE + 0x02)
/* -------------------------------------------------------------------------- */
/* Channel ID is out of range. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_BADCHANID (CHNL_EBASE + 0x03)
/* -------------------------------------------------------------------------- */
/* Channel is already in use. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_CHANBUSY (CHNL_EBASE + 0x04)
/* -------------------------------------------------------------------------- */
/* Invalid channel mode argument. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_BADMODE (CHNL_EBASE + 0x05)
/* -------------------------------------------------------------------------- */
/* dwTimeOut parameter was CHNL_IOCNOWAIT, yet no I/O completions were */
/* queued. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_NOIOC (CHNL_EBASE + 0x06)
/* -------------------------------------------------------------------------- */
/* I/O has been cancelled on this channel. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_CANCELLED (CHNL_EBASE + 0x07)
/* -------------------------------------------------------------------------- */
/* End of stream was already requested on this output channel. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_EOS (CHNL_EBASE + 0x09)
/* -------------------------------------------------------------------------- */
/* Unable to create the channel event object. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_CREATEEVENT (CHNL_EBASE + 0x0A)
/* -------------------------------------------------------------------------- */
/* Board name and unit number do not identify a valid board name. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_BRDID (CHNL_EBASE + 0x0B)
/* -------------------------------------------------------------------------- */
/* Invalid IRQ configured for this WMD for this system. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_INVALIDIRQ (CHNL_EBASE + 0x0C)
/* -------------------------------------------------------------------------- */
/* DSP word size of zero configured for this device. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_INVALIDWORDSIZE (CHNL_EBASE + 0x0D)
/* -------------------------------------------------------------------------- */
/* A zero length memory base was specified for a shared memory class driver. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_INVALIDMEMBASE (CHNL_EBASE + 0x0E)
/* -------------------------------------------------------------------------- */
/* Memory map is not configured, or unable to map physical to linear */
/* address. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_NOMEMMAP (CHNL_EBASE + 0x0F)
/* -------------------------------------------------------------------------- */
/* Attempted to create a channel manager when one already exists. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_MGREXISTS (CHNL_EBASE + 0x10)
/* -------------------------------------------------------------------------- */
/* Unable to plug channel ISR for configured IRQ. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_ISR (CHNL_EBASE + 0x11)
/* -------------------------------------------------------------------------- */
/* No free I/O request packets are available. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_NOIORPS (CHNL_EBASE + 0x12)
/* -------------------------------------------------------------------------- */
/* Buffer size is larger than the size of physical channel. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_BUFSIZE (CHNL_EBASE + 0x13)
/* -------------------------------------------------------------------------- */
/* User cannot mark end of stream on an input channel. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_NOEOS (CHNL_EBASE + 0x14)
/* -------------------------------------------------------------------------- */
/* Wait for flush operation on an output channel timed out. */
/* -------------------------------------------------------------------------- */
#define CHNL_E_WAITTIMEOUT (CHNL_EBASE + 0x15)
/* -------------------------------------------------------------------------- */
/* User supplied hEvent must be specified with pstrEventName attribute */
/* -------------------------------------------------------------------------- */
#define CHNL_E_BADUSEREVENT (CHNL_EBASE + 0x16)
/* -------------------------------------------------------------------------- */
/* Illegal user event name specified */
/* -------------------------------------------------------------------------- */
#define CHNL_E_USEREVENTNAME (CHNL_EBASE + 0x17)
/* -------------------------------------------------------------------------- */
/* Unable to prepare buffer specified */
/* -------------------------------------------------------------------------- */
#define CHNL_E_PREPFAILED (CHNL_EBASE + 0x18)
/* -------------------------------------------------------------------------- */
/* Unable to Unprepare buffer specified */
/* -------------------------------------------------------------------------- */
#define CHNL_E_UNPREPFAILED (CHNL_EBASE + 0x19)
/* ========================================================================== */
/* FAILURE Codes : SYNC */
/* ========================================================================== */
#define SYNC_EBASE (DSP_COMP_EBASE + 0x600)
/* -------------------------------------------------------------------------- */
/* Wait on a kernel event failed. */
/* -------------------------------------------------------------------------- */
#define SYNC_E_FAIL (SYNC_EBASE + 0x00)
/* -------------------------------------------------------------------------- */
/* Timeout expired while waiting for event to be signalled. */
/* -------------------------------------------------------------------------- */
#define SYNC_E_TIMEOUT (SYNC_EBASE + 0x01)
/* ========================================================================== */
/* FAILURE Codes : WMD */
/* ========================================================================== */
#define WMD_EBASE (DSP_COMP_EBASE + 0x700)
/* -------------------------------------------------------------------------- */
/* A test of hardware assumptions or integrity failed. */
/* -------------------------------------------------------------------------- */
#define WMD_E_HARDWARE (WMD_EBASE + 0x00)
/* -------------------------------------------------------------------------- */
/* One or more configuration parameters violated WMD hardware assumptions. */
/* -------------------------------------------------------------------------- */
#define WMD_E_BADCONFIG (WMD_EBASE + 0x01)
/* -------------------------------------------------------------------------- */
/* Timeout occurred waiting for a response from the hardware. */
/* -------------------------------------------------------------------------- */
#define WMD_E_TIMEOUT (WMD_EBASE + 0x02)
/* ========================================================================== */
/* FAILURE Codes : REG */
/* ========================================================================== */
#define REG_EBASE (DSP_COMP_EBASE + 0x800)
/* -------------------------------------------------------------------------- */
/* Invalid subkey parameter. */
/* -------------------------------------------------------------------------- */
#define REG_E_INVALIDSUBKEY (REG_EBASE + 0x00)
/* -------------------------------------------------------------------------- */
/* Invalid entry parameter. */
/* -------------------------------------------------------------------------- */
#define REG_E_INVALIDENTRY (REG_EBASE + 0x01)
/* -------------------------------------------------------------------------- */
/* No more registry values. */
/* -------------------------------------------------------------------------- */
#define REG_E_NOMOREITEMS (REG_EBASE + 0x02)
/* -------------------------------------------------------------------------- */
/* Insufficient space to hold data in registry value. */
/* -------------------------------------------------------------------------- */
#define REG_E_MOREDATA (REG_EBASE + 0x03)
/* ========================================================================== */
/* FAILURE Codes : KFILE */
/* ========================================================================== */
#define KFILE_EBASE (DSP_COMP_EBASE + 0x900)
/* -------------------------------------------------------------------------- */
/* Invalid file handle. */
/* -------------------------------------------------------------------------- */
#define E_KFILE_INVALIDHANDLE (KFILE_EBASE + 0x01)
/* -------------------------------------------------------------------------- */
/* Bad file name. */
/* -------------------------------------------------------------------------- */
#define E_KFILE_BADFILENAME (KFILE_EBASE + 0x02)
/* -------------------------------------------------------------------------- */
/* Invalid file mode. */
/* -------------------------------------------------------------------------- */
#define E_KFILE_INVALIDMODE (KFILE_EBASE + 0x03)
/* -------------------------------------------------------------------------- */
/* No resources available. */
/* -------------------------------------------------------------------------- */
#define E_KFILE_NORESOURCES (KFILE_EBASE + 0x04)
/* -------------------------------------------------------------------------- */
/* Invalid file buffer . */
/* -------------------------------------------------------------------------- */
#define E_KFILE_INVALIDBUFFER (KFILE_EBASE + 0x05)
/* -------------------------------------------------------------------------- */
/* Bad origin argument. */
/* -------------------------------------------------------------------------- */
#define E_KFILE_BADORIGINFLAG (KFILE_EBASE + 0x06)
/* -------------------------------------------------------------------------- */
/* Invalid file offset value. */
/* -------------------------------------------------------------------------- */
#define E_KFILE_INVALIDOFFSET (KFILE_EBASE + 0x07)
/* -------------------------------------------------------------------------- */
/* General KFILE error condition */
/* -------------------------------------------------------------------------- */
#define E_KFILE_ERROR (KFILE_EBASE + 0x08)
#ifdef __cplusplus
}
#endif
#endif /* ERRBASE_ */