# Copyright (C) 2010-2014, International Business Machines Corporation and others. # All Rights Reserved. # # Commands for regenerating ICU4C locale data (.txt files) from CLDR. # # The process requires local copies of # - CLDR (the source of most of the data, and some Java tools) # - ICU4J (used only for checking the converted data) # - ICU4C (the destination for the new data, and the source for some of it) # (Either check out ICU4C from Subversion, or download the additional # icu4c-*-data.zip file so that the icu/source/data/ directory is fully # populated.) # # For an official CLDR data integration into ICU, these should be clean, freshly # checked-out. For released CLDR sources, an alternative to checking out sources # for a given version is downloading the zipped sources for the common (core.zip) # and tools (tools.zip) directory subtrees from the Data column in # [http://cldr.unicode.org/index/downloads]. # # The versions of each of these must match. Included with the release notes for # ICU is the version number and/or a CLDR svn tag name for the revision of CLDR # that was the source of the data for that release of ICU. # # Note: Some versions of the OpenJDK will not build the CLDR java utilities. # If you see compilation errors complaining about type incompatibilities with # functions on generic classes, try switching to the Sun JDK. # # Besides a standard JDK, the process also requires ant # (http://ant.apache.org/), # plus the xml-apis.jar from the Apache xalan package # (http://xml.apache.org/xalan-j/downloads.html). # # Note: Enough things can (and will) fail in this process that it is best to # run the commands separately from an interactive shell. They should all # copy and paste without problems. # # It is often useful to save logs of the output of many of the steps in this # process. The commands below put log files in /tmp; you may want to put them # somewhere else. # #---- # # There are several environment variables that need to be defined. # # a) Java- and ant-related variables # # JAVA_HOME: Path to JDK (a directory, containing e.g. bin/java, bin/javac, # etc.); on many systems this can be set using # `/usr/libexec/java_home`. # # ANT_OPTS: You may want to set: # # -Xmx1024m, to give Java more memory; otherwise it may run out # of heap. # # b) CLDR-related variables # # CLDR_DIR: Path to root of CLDR sources, below which are the common and # tools directories. # CLDR_CLASSES: Defined relative to CLDR_DIR. It only needs to be set if you # are not running ant jar for CLDR and have a non-default output # folder for cldr-tools classes. # # c) ICU-related variables # These variables only need to be set if you're directly reusing the # commands below. # # ICU4C_DIR: Path to root of ICU4C sources, below which is the source dir. # # ICU4J_ROOT: Path to root of ICU4J sources, below which is the main dir. # #---- # # If you are adding or removing locales, or specific kinds of locale data, # there are some xml files in the ICU sources that need to be updated (these xml # files are used in addition to the CLDR files as inputs to the CLDR data build # process for ICU): # # icu/trunk/source/data/icu-config.xml - Update <locales> to add or remove # CLDR locales for inclusion in ICU. Update <paths> to prefer # alt forms for certain paths, or to exclude certain paths; note # that <paths> items can only have draft or alt attributes. # # Note that if a language-only locale (e.g. "de") is included in # <locales>, then all region sublocales for that language that # are present in CLDR data (e.g. "de_AT", "de_BE", "de_CH", etc.) # should also be included in <locales>, per PMC policy decision # 2012-05-02 (see http://bugs.icu-project.org/trac/ticket/9298). # # icu/trunk/source/data/build.xml - If you are adding or removing break # iterators, you need to update <fileset id="brkitr" ...> under # <target name="clean" ...> to clean the correct set of files. # # icu/trunk/source/data/xml/ - If you are adding a new locale, break # iterator, collation tailoring, or rule-based number formatter, # you may need to add a corresponding xml file in (respectively) # the main/, brkitr/, collation/, or rbnf/ subdirectory here. # #---- # # For an official CLDR data integration into ICU, there are some additional # considerations: # # a) Don't commit anything in ICU sources (and possibly any changes in CLDR # sources, depending on their nature) until you have finished testing and # resolving build issues and test failures for both ICU4C and ICU4J. # # b) There are version numbers that may need manual updating in CLDR (other # version numbers get updated automatically, based on these): # # common/dtd/ldml.dtd - update cldrVersion # common/dtd/ldmlBCP47.dtd - update cldrVersion # common/dtd/ldmlSupplemental.dtd - update cldrVersion # tools/java/org/unicode/cldr/util/CLDRFile.java - update GEN_VERSION # # c) After everything is committed, you will need to tag the CLDR, ICU4J, and # ICU4C sources that ended up being used for the integration; see step 17 # below. # ################################################################################ # 1a. Java and ant variables, adjust for your system export JAVA_HOME=`/usr/libexec/java_home` export ANT_OPTS="-Xmx1024m" # 1b. CLDR variables, adjust for your setup; with cygwin it might be e.g. # CLDR_DIR=`cygpath -wp /build/cldr` export CLDR_DIR=$HOME/cldr/trunk #export CLDR_CLASSES=$CLDR_DIR/tools/java/classes # 1c. ICU variables export ICU4C_DIR=$HOME/icu/icu/trunk export ICU4J_ROOT=$HOME/icu/icu4j/trunk # 2. Build the CLDR Java tools cd $CLDR_DIR/tools/java #cd $CLDR_DIR/cldr-tools ant jar # 3. Configure ICU4C, build and test without new data first, to verify that # there are no pre-existing errors (configure shown here for MacOSX, adjust # for your platform). cd $ICU4C_DIR/source ./runConfigureICU MacOSX make all 2>&1 | tee /tmp/icu4c-oldData-makeAll.txt make check 2>&1 | tee /tmp/icu4c-oldData-makeCheck.txt # 4. Build the new ICU4C data files; these include .txt files and .mk files. # These new files will replace whatever was already present in the ICU4C sources. # This process uses ant with ICU's data/build.xml and data/icu-config.xml to # operate (via CLDR's ant/CLDRConverterTool.java and ant/CLDRBuild.java) the # necessary CLDR tools including LDML2ICUConverter, ConvertTransforms, etc. # This process will take several minutes. # Keep a log so you can investigate anything that looks suspicious. cd $ICU4C_DIR/source/data ant clean ant all 2>&1 | tee /tmp/cldrNN-buildLog.txt # 5. Check which data files have modifications, which have been added or removed # (if there are no changes, you may not need to proceed further). Make sure the # list seems reasonable. svn status # 6. Fix any errors, investigate any warnings. Some warnings are expected, # including warnings for missing versions in locale names which specify some # collationvariants, e.g. # [cldr-build] WARNING (ja_JP_TRADITIONAL): No version #?? # [cldr-build] WARNING (zh_TW_STROKE): No version #?? # and warnings for some empty collation bundles, e.g. # [cldr-build] WARNING (en): warning: No collations found. Bundle will ... # [cldr-build] WARNING (to): warning: No collations found. Bundle will ... # # Fixing may entail modifying CLDR source data or tools - for example, # updating the validSubLocales for collation data (file a bug if appropriate). # Repeat steps 4-5 until there are no build errors and no unexpected # warnings. # 7. Now rebuild ICU4C with the new data and run make check tests. # Again, keep a log so you can investigate the errors. cd $ICU4C_DIR/source make check 2>&1 | tee /tmp/icu4c-newData-makeCheck.txt # 8. Investigate each test case failure. The first run processing new CLDR data # from the Survey Tool can result in thousands of failures (in many cases, one # CLDR data fix can resolve hundreds of test failures). If the error is caused # by bad CLDR data, then file a CLDR bug, fix the data, and regenerate from # step 4. If the data is OK but the testcase needs to be updated because the # data has legitimately changed, then update the testcase. You will check in # the updated testcases along with the new ICU data at the end of this process. # Note that if the new data has any differences in structure, you will have to # update test/testdata/structLocale.txt or /tsutil/cldrtest/TestLocaleStructure # may fail. # Repeat steps 4-7 until there are no errors. # 9. Now run the make check tests in exhaustive mode: cd $ICU4C_DIR/source export INTLTEST_OPTS="-e" export CINTLTST_OPTS="-e" make check 2>&1 | tee /tmp/icu4c-newData-makeCheckEx.txt # 10. Again, investigate each failure, fixing CLDR data or ICU test cases as # appropriate, and repeating steps 4-7 and 9 until there are no errors. # 11. Now with ICU4J, build and test without new data first, to verify that # there are no pre-existing errors (or at least to have the pre-existing errors # as a base for comparison): cd $ICU4J_ROOT ant all 2>&1 | tee /tmp/icu4j-oldData-antAll.txt ant check 2>&1 | tee /tmp/icu4j-oldData-antCheck.txt # 12. Now build the new data for ICU4J cd $ICU4C_DIR/source/data make icu4j-data-install # 13. Now rebuild ICU4J with the new data and run tests: # Keep a log so you can investigate the errors. cd $ICU4J_ROOT ant check 2>&1 | tee /tmp/icu4j-newData-antCheck.txt # 14. Investigate test case failures; fix test cases and repeat from step 12, # or fix CLDR data and repeat from step 4, as appropriate, until; there are no # more failures in ICU4C or ICU4J (except failures that were present before you # began testing the new CLDR data). # 15. Check the file changes; then svn add or svn remove as necessary, and # commit the changes. cd $ICU4C_DIR/source svn status # add or remove as necessary, then commit cd $ICU4J_ROOT svn status # add or remove as necessary, then commit # 16. For an official CLDR data integration into ICU, now tag the CLDR, ICU4J, # and ICU4C sources with an appropriate CLDR milestone (you can check previous # tags for format), e.g.: svn copy svn+ssh://unicode.org/repos/cldr/trunk \ svn+ssh://unicode.org/repos/cldr/tags/release-NNN \ --parents -m "cldrbug nnnn: tag cldr sources for NNN" svn copy svn+ssh://source.icu-project.org/repos/icu/icu4j/trunk \ svn+ssh://source.icu-project.org/repos/icu/icu4j/tags/cldr-NNN \ --parents -m 'ticket:mmmm: tag the version used for integrating CLDR NNN' svn copy svn+ssh://source.icu-project.org/repos/icu/icu/trunk \ svn+ssh://source.icu-project.org/repos/icu/icu/tags/cldr-NNN \ --parents -m 'ticket:mmmm: tag the version used for integrating CLDR NNN'