/******************************************************************************
*
* Copyright (C) 1999-2012 Broadcom Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************/
/******************************************************************************
*
* this file contains the main Bluetooth Manager (BTM) internal
* definitions.
*
******************************************************************************/
#ifndef BTM_BLE_INT_H
#define BTM_BLE_INT_H
#include "bt_target.h"
#include "bt_common.h"
#include "hcidefs.h"
#include "btm_ble_api.h"
#include "btm_int.h"
#if BLE_INCLUDED == TRUE && SMP_INCLUDED == TRUE
#include "smp_api.h"
#endif
/* scanning enable status */
#define BTM_BLE_SCAN_ENABLE 0x01
#define BTM_BLE_SCAN_DISABLE 0x00
/* advertising enable status */
#define BTM_BLE_ADV_ENABLE 0x01
#define BTM_BLE_ADV_DISABLE 0x00
/* use the high 4 bits unused by inquiry mode */
#define BTM_BLE_SELECT_SCAN 0x20
#define BTM_BLE_NAME_REQUEST 0x40
#define BTM_BLE_OBSERVE 0x80
#define BTM_BLE_MAX_WL_ENTRY 1
#define BTM_BLE_AD_DATA_LEN 31
#define BTM_BLE_ENC_MASK 0x03
#define BTM_BLE_DUPLICATE_ENABLE 1
#define BTM_BLE_DUPLICATE_DISABLE 0
#define BTM_BLE_GAP_DISC_SCAN_INT 18 /* Interval(scan_int) = 11.25 ms= 0x0010 * 0.625 ms */
#define BTM_BLE_GAP_DISC_SCAN_WIN 18 /* scan_window = 11.25 ms= 0x0010 * 0.625 ms */
#define BTM_BLE_GAP_ADV_INT 512 /* Tgap(gen_disc) = 1.28 s= 512 * 0.625 ms */
#define BTM_BLE_GAP_LIM_TIMEOUT_MS (180 * 1000) /* Tgap(lim_timeout) = 180s max */
#define BTM_BLE_LOW_LATENCY_SCAN_INT 8000 /* Interval(scan_int) = 5s= 8000 * 0.625 ms */
#define BTM_BLE_LOW_LATENCY_SCAN_WIN 8000 /* scan_window = 5s= 8000 * 0.625 ms */
#define BTM_BLE_GAP_ADV_FAST_INT_1 48 /* TGAP(adv_fast_interval1) = 30(used) ~ 60 ms = 48 *0.625 */
#define BTM_BLE_GAP_ADV_FAST_INT_2 160 /* TGAP(adv_fast_interval2) = 100(used) ~ 150 ms = 160 * 0.625 ms */
#define BTM_BLE_GAP_ADV_SLOW_INT 2048 /* Tgap(adv_slow_interval) = 1.28 s= 512 * 0.625 ms */
#define BTM_BLE_GAP_ADV_DIR_MAX_INT 800 /* Tgap(dir_conn_adv_int_max) = 500 ms = 800 * 0.625 ms */
#define BTM_BLE_GAP_ADV_DIR_MIN_INT 400 /* Tgap(dir_conn_adv_int_min) = 250 ms = 400 * 0.625 ms */
#define BTM_BLE_GAP_FAST_ADV_TIMEOUT_MS (30 * 1000)
#define BTM_BLE_SEC_REQ_ACT_NONE 0
#define BTM_BLE_SEC_REQ_ACT_ENCRYPT 1 /* encrypt the link using current key or key refresh */
#define BTM_BLE_SEC_REQ_ACT_PAIR 2
#define BTM_BLE_SEC_REQ_ACT_DISCARD 3 /* discard the sec request while encryption is started but not completed */
typedef UINT8 tBTM_BLE_SEC_REQ_ACT;
#define BLE_STATIC_PRIVATE_MSB_MASK 0x3f
#define BLE_RESOLVE_ADDR_MSB 0x40 /* most significant bit, bit7, bit6 is 01 to be resolvable random */
#define BLE_RESOLVE_ADDR_MASK 0xc0 /* bit 6, and bit7 */
#define BTM_BLE_IS_RESOLVE_BDA(x) ((x[0] & BLE_RESOLVE_ADDR_MASK) == BLE_RESOLVE_ADDR_MSB)
#define BLE_PUBLIC_ADDR_MSB_MASK 0xC0
#define BLE_PUBLIC_ADDR_MSB 0x80 /* most significant bit, bit7, bit6 is 10 to be public address*/
#define BTM_IS_PUBLIC_BDA(x) ((x[0] & BLE_PUBLIC_ADDR_MSB) == BLE_PUBLIC_ADDR_MSB_MASK)
/* LE scan activity bit mask, continue with LE inquiry bits */
#define BTM_LE_SELECT_CONN_ACTIVE 0x40 /* selection connection is in progress */
#define BTM_LE_OBSERVE_ACTIVE 0x80 /* observe is in progress */
/* BLE scan activity mask checking */
#define BTM_BLE_IS_SCAN_ACTIVE(x) ((x) & BTM_BLE_SCAN_ACTIVE_MASK)
#define BTM_BLE_IS_INQ_ACTIVE(x) ((x) & BTM_BLE_INQUIRY_MASK)
#define BTM_BLE_IS_OBS_ACTIVE(x) ((x) & BTM_LE_OBSERVE_ACTIVE)
#define BTM_BLE_IS_SEL_CONN_ACTIVE(x) ((x) & BTM_LE_SELECT_CONN_ACTIVE)
/* BLE ADDR type ID bit */
#define BLE_ADDR_TYPE_ID_BIT 0x02
#define BTM_VSC_CHIP_CAPABILITY_L_VERSION 55
#define BTM_VSC_CHIP_CAPABILITY_M_VERSION 95
typedef struct
{
UINT16 data_mask;
UINT8 *p_flags;
UINT8 ad_data[BTM_BLE_AD_DATA_LEN];
UINT8 *p_pad;
}tBTM_BLE_LOCAL_ADV_DATA;
typedef struct
{
UINT32 inq_count; /* Used for determining if a response has already been */
/* received for the current inquiry operation. (We do not */
/* want to flood the caller with multiple responses from */
/* the same device. */
BOOLEAN scan_rsp;
tBLE_BD_ADDR le_bda;
} tINQ_LE_BDADDR;
#define BTM_BLE_ADV_DATA_LEN_MAX 31
#define BTM_BLE_CACHE_ADV_DATA_MAX 62
#define BTM_BLE_ISVALID_PARAM(x, min, max) (((x) >= (min) && (x) <= (max)) || ((x) == BTM_BLE_CONN_PARAM_UNDEF))
/* 15 minutes minimum for random address refreshing */
#define BTM_BLE_PRIVATE_ADDR_INT_MS (15 * 60 * 1000)
typedef struct
{
UINT16 discoverable_mode;
UINT16 connectable_mode;
UINT32 scan_window;
UINT32 scan_interval;
UINT8 scan_type; /* current scan type: active or passive */
UINT8 scan_duplicate_filter; /* duplicate filter enabled for scan */
UINT16 adv_interval_min;
UINT16 adv_interval_max;
tBTM_BLE_AFP afp; /* advertising filter policy */
tBTM_BLE_SFP sfp; /* scanning filter policy */
tBLE_ADDR_TYPE adv_addr_type;
UINT8 evt_type;
UINT8 adv_mode;
tBLE_BD_ADDR direct_bda;
tBTM_BLE_EVT directed_conn;
BOOLEAN fast_adv_on;
alarm_t *fast_adv_timer;
UINT8 adv_len;
UINT8 adv_data_cache[BTM_BLE_CACHE_ADV_DATA_MAX];
/* inquiry BD addr database */
UINT8 num_bd_entries;
UINT8 max_bd_entries;
tBTM_BLE_LOCAL_ADV_DATA adv_data;
tBTM_BLE_ADV_CHNL_MAP adv_chnl_map;
alarm_t *inquiry_timer;
BOOLEAN scan_rsp;
UINT8 state; /* Current state that the inquiry process is in */
INT8 tx_power;
} tBTM_BLE_INQ_CB;
/* random address resolving complete callback */
typedef void (tBTM_BLE_RESOLVE_CBACK) (void * match_rec, void *p);
typedef void (tBTM_BLE_ADDR_CBACK) (BD_ADDR_PTR static_random, void *p);
/* random address management control block */
typedef struct
{
tBLE_ADDR_TYPE own_addr_type; /* local device LE address type */
BD_ADDR private_addr;
BD_ADDR random_bda;
BOOLEAN busy;
tBTM_BLE_ADDR_CBACK *p_generate_cback;
void *p;
alarm_t *refresh_raddr_timer;
} tBTM_LE_RANDOM_CB;
#define BTM_BLE_MAX_BG_CONN_DEV_NUM 10
typedef struct
{
UINT16 min_conn_int;
UINT16 max_conn_int;
UINT16 slave_latency;
UINT16 supervision_tout;
}tBTM_LE_CONN_PRAMS;
typedef struct
{
BD_ADDR bd_addr;
UINT8 attr;
BOOLEAN is_connected;
BOOLEAN in_use;
}tBTM_LE_BG_CONN_DEV;
/* white list using state as a bit mask */
#define BTM_BLE_WL_IDLE 0
#define BTM_BLE_WL_INIT 1
#define BTM_BLE_WL_SCAN 2
#define BTM_BLE_WL_ADV 4
typedef UINT8 tBTM_BLE_WL_STATE;
/* resolving list using state as a bit mask */
#define BTM_BLE_RL_IDLE 0
#define BTM_BLE_RL_INIT 1
#define BTM_BLE_RL_SCAN 2
#define BTM_BLE_RL_ADV 4
typedef UINT8 tBTM_BLE_RL_STATE;
/* BLE connection state */
#define BLE_CONN_IDLE 0
#define BLE_DIR_CONN 1
#define BLE_BG_CONN 2
#define BLE_CONN_CANCEL 3
typedef UINT8 tBTM_BLE_CONN_ST;
typedef struct
{
void *p_param;
}tBTM_BLE_CONN_REQ;
/* LE state request */
#define BTM_BLE_STATE_INVALID 0
#define BTM_BLE_STATE_CONN_ADV 1
#define BTM_BLE_STATE_INIT 2
#define BTM_BLE_STATE_MASTER 3
#define BTM_BLE_STATE_SLAVE 4
#define BTM_BLE_STATE_LO_DUTY_DIR_ADV 5
#define BTM_BLE_STATE_HI_DUTY_DIR_ADV 6
#define BTM_BLE_STATE_NON_CONN_ADV 7
#define BTM_BLE_STATE_PASSIVE_SCAN 8
#define BTM_BLE_STATE_ACTIVE_SCAN 9
#define BTM_BLE_STATE_SCAN_ADV 10
#define BTM_BLE_STATE_MAX 11
typedef UINT8 tBTM_BLE_STATE;
#define BTM_BLE_STATE_CONN_ADV_BIT 0x0001
#define BTM_BLE_STATE_INIT_BIT 0x0002
#define BTM_BLE_STATE_MASTER_BIT 0x0004
#define BTM_BLE_STATE_SLAVE_BIT 0x0008
#define BTM_BLE_STATE_LO_DUTY_DIR_ADV_BIT 0x0010
#define BTM_BLE_STATE_HI_DUTY_DIR_ADV_BIT 0x0020
#define BTM_BLE_STATE_NON_CONN_ADV_BIT 0x0040
#define BTM_BLE_STATE_PASSIVE_SCAN_BIT 0x0080
#define BTM_BLE_STATE_ACTIVE_SCAN_BIT 0x0100
#define BTM_BLE_STATE_SCAN_ADV_BIT 0x0200
typedef UINT16 tBTM_BLE_STATE_MASK;
#define BTM_BLE_STATE_ALL_MASK 0x03ff
#define BTM_BLE_STATE_ALL_ADV_MASK (BTM_BLE_STATE_CONN_ADV_BIT|BTM_BLE_STATE_LO_DUTY_DIR_ADV_BIT|BTM_BLE_STATE_HI_DUTY_DIR_ADV_BIT|BTM_BLE_STATE_SCAN_ADV_BIT)
#define BTM_BLE_STATE_ALL_SCAN_MASK (BTM_BLE_STATE_PASSIVE_SCAN_BIT|BTM_BLE_STATE_ACTIVE_SCAN_BIT)
#define BTM_BLE_STATE_ALL_CONN_MASK (BTM_BLE_STATE_MASTER_BIT|BTM_BLE_STATE_SLAVE_BIT)
#ifndef BTM_LE_RESOLVING_LIST_MAX
#define BTM_LE_RESOLVING_LIST_MAX 0x20
#endif
typedef struct
{
BD_ADDR *resolve_q_random_pseudo;
UINT8 *resolve_q_action;
UINT8 q_next;
UINT8 q_pending;
} tBTM_BLE_RESOLVE_Q;
typedef struct
{
BOOLEAN in_use;
BOOLEAN to_add;
BD_ADDR bd_addr;
UINT8 attr;
}tBTM_BLE_WL_OP;
/* BLE privacy mode */
#define BTM_PRIVACY_NONE 0 /* BLE no privacy */
#define BTM_PRIVACY_1_1 1 /* BLE privacy 1.1, do not support privacy 1.0 */
#define BTM_PRIVACY_1_2 2 /* BLE privacy 1.2 */
#define BTM_PRIVACY_MIXED 3 /* BLE privacy mixed mode, broadcom propietary mode */
typedef UINT8 tBTM_PRIVACY_MODE;
/* data length change event callback */
typedef void (tBTM_DATA_LENGTH_CHANGE_CBACK) (UINT16 max_tx_length, UINT16 max_rx_length);
/* Define BLE Device Management control structure
*/
typedef struct
{
UINT8 scan_activity; /* LE scan activity mask */
/*****************************************************
** BLE Inquiry
*****************************************************/
tBTM_BLE_INQ_CB inq_var;
/* observer callback and timer */
tBTM_INQ_RESULTS_CB *p_obs_results_cb;
tBTM_CMPL_CB *p_obs_cmpl_cb;
alarm_t *observer_timer;
/* background connection procedure cb value */
tBTM_BLE_CONN_TYPE bg_conn_type;
UINT32 scan_int;
UINT32 scan_win;
tBTM_BLE_SEL_CBACK *p_select_cback;
/* white list information */
UINT8 white_list_avail_size;
tBTM_BLE_WL_STATE wl_state;
fixed_queue_t *conn_pending_q;
tBTM_BLE_CONN_ST conn_state;
/* random address management control block */
tBTM_LE_RANDOM_CB addr_mgnt_cb;
BOOLEAN enabled;
#if BLE_PRIVACY_SPT == TRUE
BOOLEAN mixed_mode; /* privacy 1.2 mixed mode is on or not */
tBTM_PRIVACY_MODE privacy_mode; /* privacy mode */
UINT8 resolving_list_avail_size; /* resolving list available size */
tBTM_BLE_RESOLVE_Q resolving_list_pend_q; /* Resolving list queue */
tBTM_BLE_RL_STATE suspended_rl_state; /* Suspended resolving list state */
UINT8 *irk_list_mask; /* IRK list availability mask, up to max entry bits */
tBTM_BLE_RL_STATE rl_state; /* Resolving list state */
#endif
tBTM_BLE_WL_OP wl_op_q[BTM_BLE_MAX_BG_CONN_DEV_NUM];
/* current BLE link state */
tBTM_BLE_STATE_MASK cur_states; /* bit mask of tBTM_BLE_STATE */
UINT8 link_count[2]; /* total link count master and slave*/
} tBTM_BLE_CB;
#ifdef __cplusplus
extern "C" {
#endif
extern void btm_ble_adv_raddr_timer_timeout(void *data);
extern void btm_ble_refresh_raddr_timer_timeout(void *data);
extern void btm_ble_process_adv_pkt (UINT8 *p);
extern void btm_ble_proc_scan_rsp_rpt (UINT8 *p);
extern tBTM_STATUS btm_ble_read_remote_name(BD_ADDR remote_bda, tBTM_INQ_INFO *p_cur, tBTM_CMPL_CB *p_cb);
extern BOOLEAN btm_ble_cancel_remote_name(BD_ADDR remote_bda);
extern tBTM_STATUS btm_ble_set_discoverability(UINT16 combined_mode);
extern tBTM_STATUS btm_ble_set_connectability(UINT16 combined_mode);
extern tBTM_STATUS btm_ble_start_inquiry (UINT8 mode, UINT8 duration);
extern void btm_ble_stop_scan(void);
extern void btm_clear_all_pending_le_entry(void);
extern void btm_ble_stop_scan();
extern BOOLEAN btm_ble_send_extended_scan_params(UINT8 scan_type, UINT32 scan_int,
UINT32 scan_win, UINT8 addr_type_own,
UINT8 scan_filter_policy);
extern void btm_ble_stop_inquiry(void);
extern void btm_ble_init (void);
extern void btm_ble_connected (UINT8 *bda, UINT16 handle, UINT8 enc_mode, UINT8 role, tBLE_ADDR_TYPE addr_type, BOOLEAN addr_matched);
extern void btm_ble_read_remote_features_complete(UINT8 *p);
extern void btm_ble_write_adv_enable_complete(UINT8 * p);
extern void btm_ble_conn_complete(UINT8 *p, UINT16 evt_len, BOOLEAN enhanced);
extern void btm_read_ble_local_supported_states_complete(UINT8 *p, UINT16 evt_len);
extern tBTM_BLE_CONN_ST btm_ble_get_conn_st(void);
extern void btm_ble_set_conn_st(tBTM_BLE_CONN_ST new_st);
extern UINT8 *btm_ble_build_adv_data(tBTM_BLE_AD_MASK *p_data_mask, UINT8 **p_dst,
tBTM_BLE_ADV_DATA *p_data);
extern tBTM_STATUS btm_ble_start_adv(void);
extern tBTM_STATUS btm_ble_stop_adv(void);
extern tBTM_STATUS btm_ble_start_scan(void);
extern void btm_ble_create_ll_conn_complete (UINT8 status);
/* LE security function from btm_sec.c */
#if SMP_INCLUDED == TRUE
extern void btm_ble_link_sec_check(BD_ADDR bd_addr, tBTM_LE_AUTH_REQ auth_req, tBTM_BLE_SEC_REQ_ACT *p_sec_req_act);
extern void btm_ble_ltk_request_reply(BD_ADDR bda, BOOLEAN use_stk, BT_OCTET16 stk);
extern UINT8 btm_proc_smp_cback(tSMP_EVT event, BD_ADDR bd_addr, tSMP_EVT_DATA *p_data);
extern tBTM_STATUS btm_ble_set_encryption (BD_ADDR bd_addr, tBTM_BLE_SEC_ACT sec_act, UINT8 link_role);
extern void btm_ble_ltk_request(UINT16 handle, UINT8 rand[8], UINT16 ediv);
extern tBTM_STATUS btm_ble_start_encrypt(BD_ADDR bda, BOOLEAN use_stk, BT_OCTET16 stk);
extern void btm_ble_link_encrypted(BD_ADDR bd_addr, UINT8 encr_enable);
#endif
/* LE device management functions */
extern void btm_ble_reset_id( void );
/* security related functions */
extern void btm_ble_increment_sign_ctr(BD_ADDR bd_addr, BOOLEAN is_local );
extern BOOLEAN btm_get_local_div (BD_ADDR bd_addr, UINT16 *p_div);
extern BOOLEAN btm_ble_get_enc_key_type(BD_ADDR bd_addr, UINT8 *p_key_types);
extern void btm_ble_test_command_complete(UINT8 *p);
extern void btm_ble_rand_enc_complete (UINT8 *p, UINT16 op_code, tBTM_RAND_ENC_CB *p_enc_cplt_cback);
extern void btm_sec_save_le_key(BD_ADDR bd_addr, tBTM_LE_KEY_TYPE key_type, tBTM_LE_KEY_VALUE *p_keys, BOOLEAN pass_to_application);
extern void btm_ble_update_sec_key_size(BD_ADDR bd_addr, UINT8 enc_key_size);
extern UINT8 btm_ble_read_sec_key_size(BD_ADDR bd_addr);
/* white list function */
extern BOOLEAN btm_update_dev_to_white_list(BOOLEAN to_add, BD_ADDR bd_addr);
extern void btm_update_scanner_filter_policy(tBTM_BLE_SFP scan_policy);
extern void btm_update_adv_filter_policy(tBTM_BLE_AFP adv_policy);
extern void btm_ble_clear_white_list (void);
extern void btm_read_white_list_size_complete(UINT8 *p, UINT16 evt_len);
extern void btm_ble_add_2_white_list_complete(UINT8 status);
extern void btm_ble_remove_from_white_list_complete(UINT8 *p, UINT16 evt_len);
extern void btm_ble_clear_white_list_complete(UINT8 *p, UINT16 evt_len);
extern void btm_ble_white_list_init(UINT8 white_list_size);
/* background connection function */
extern BOOLEAN btm_ble_suspend_bg_conn(void);
extern BOOLEAN btm_ble_resume_bg_conn(void);
extern void btm_ble_initiate_select_conn(BD_ADDR bda);
extern BOOLEAN btm_ble_start_auto_conn(BOOLEAN start);
extern BOOLEAN btm_ble_start_select_conn(BOOLEAN start,tBTM_BLE_SEL_CBACK *p_select_cback);
extern BOOLEAN btm_ble_renew_bg_conn_params(BOOLEAN add, BD_ADDR bd_addr);
extern void btm_write_dir_conn_wl(BD_ADDR target_addr);
extern void btm_ble_update_mode_operation(UINT8 link_role, BD_ADDR bda, UINT8 status);
extern BOOLEAN btm_execute_wl_dev_operation(void);
extern void btm_ble_update_link_topology_mask(UINT8 role, BOOLEAN increase);
/* direct connection utility */
extern BOOLEAN btm_send_pending_direct_conn(void);
extern void btm_ble_enqueue_direct_conn_req(void *p_param);
/* BLE address management */
extern void btm_gen_resolvable_private_addr (void *p_cmd_cplt_cback);
extern void btm_gen_non_resolvable_private_addr (tBTM_BLE_ADDR_CBACK *p_cback, void *p);
extern void btm_ble_resolve_random_addr(BD_ADDR random_bda, tBTM_BLE_RESOLVE_CBACK * p_cback, void *p);
extern void btm_gen_resolve_paddr_low(tBTM_RAND_ENC *p);
/* privacy function */
#if (defined BLE_PRIVACY_SPT && BLE_PRIVACY_SPT == TRUE)
/* BLE address mapping with CS feature */
extern BOOLEAN btm_identity_addr_to_random_pseudo(BD_ADDR bd_addr, UINT8 *p_addr_type, BOOLEAN refresh);
extern BOOLEAN btm_random_pseudo_to_identity_addr(BD_ADDR random_pseudo, UINT8 *p_static_addr_type);
extern void btm_ble_refresh_peer_resolvable_private_addr(BD_ADDR pseudo_bda, BD_ADDR rra, UINT8 rra_type);
extern void btm_ble_refresh_local_resolvable_private_addr(BD_ADDR pseudo_addr, BD_ADDR local_rpa);
extern void btm_ble_read_resolving_list_entry_complete(UINT8 *p, UINT16 evt_len) ;
extern void btm_ble_remove_resolving_list_entry_complete(UINT8 *p, UINT16 evt_len);
extern void btm_ble_add_resolving_list_entry_complete(UINT8 *p, UINT16 evt_len);
extern void btm_ble_clear_resolving_list_complete(UINT8 *p, UINT16 evt_len);
extern void btm_read_ble_resolving_list_size_complete (UINT8 *p, UINT16 evt_len);
extern void btm_ble_enable_resolving_list(UINT8);
extern BOOLEAN btm_ble_disable_resolving_list(UINT8 rl_mask, BOOLEAN to_resume);
extern void btm_ble_enable_resolving_list_for_platform (UINT8 rl_mask);
extern void btm_ble_resolving_list_init(UINT8 max_irk_list_sz);
extern void btm_ble_resolving_list_cleanup(void);
#endif
extern void btm_ble_multi_adv_configure_rpa (tBTM_BLE_MULTI_ADV_INST *p_inst);
extern void btm_ble_multi_adv_init(void);
extern void* btm_ble_multi_adv_get_ref(UINT8 inst_id);
extern void btm_ble_multi_adv_cleanup(void);
extern void btm_ble_multi_adv_reenable(UINT8 inst_id);
extern void btm_ble_multi_adv_enb_privacy(BOOLEAN enable);
extern char btm_ble_map_adv_tx_power(int tx_power_index);
extern void btm_ble_batchscan_init(void);
extern void btm_ble_batchscan_cleanup(void);
extern void btm_ble_adv_filter_init(void);
extern void btm_ble_adv_filter_cleanup(void);
extern BOOLEAN btm_ble_topology_check(tBTM_BLE_STATE_MASK request);
extern BOOLEAN btm_ble_clear_topology_mask(tBTM_BLE_STATE_MASK request_state);
extern BOOLEAN btm_ble_set_topology_mask(tBTM_BLE_STATE_MASK request_state);
#if BTM_BLE_CONFORMANCE_TESTING == TRUE
extern void btm_ble_set_no_disc_if_pair_fail (BOOLEAN disble_disc);
extern void btm_ble_set_test_mac_value (BOOLEAN enable, UINT8 *p_test_mac_val);
extern void btm_ble_set_test_local_sign_cntr_value(BOOLEAN enable, UINT32 test_local_sign_cntr);
extern void btm_set_random_address(BD_ADDR random_bda);
extern void btm_ble_set_keep_rfu_in_auth_req(BOOLEAN keep_rfu);
#endif
#ifdef __cplusplus
}
#endif
#endif