# Copyright (C) 2016 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
.class public LSmaliTests;
.super Ljava/lang/Object;
## CHECK-START: int SmaliTests.EqualTrueRhs(boolean) instruction_simplifier (before)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: <<Const1:i\d+>> IntConstant 1
## CHECK-DAG: <<Cond:z\d+>> Equal [<<Arg>>,<<Const1>>]
## CHECK-DAG: If [<<Cond>>]
## CHECK-START: int SmaliTests.EqualTrueRhs(boolean) instruction_simplifier (after)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: If [<<Arg>>]
.method public static EqualTrueRhs(Z)I
.registers 3
const v0, 0x1
const v1, 0x5
if-eq p0, v0, :return
const v1, 0x3
:return
return v1
.end method
## CHECK-START: int SmaliTests.EqualTrueLhs(boolean) instruction_simplifier (before)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: <<Const1:i\d+>> IntConstant 1
## CHECK-DAG: <<Cond:z\d+>> Equal [<<Const1>>,<<Arg>>]
## CHECK-DAG: If [<<Cond>>]
## CHECK-START: int SmaliTests.EqualTrueLhs(boolean) instruction_simplifier (after)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: If [<<Arg>>]
.method public static EqualTrueLhs(Z)I
.registers 3
const v0, 0x1
const v1, 0x5
if-eq v0, p0, :return
const v1, 0x3
:return
return v1
.end method
## CHECK-START: int SmaliTests.EqualFalseRhs(boolean) instruction_simplifier (before)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: <<Const0:i\d+>> IntConstant 0
## CHECK-DAG: <<Cond:z\d+>> Equal [<<Arg>>,<<Const0>>]
## CHECK-DAG: If [<<Cond>>]
## CHECK-START: int SmaliTests.EqualFalseRhs(boolean) instruction_simplifier (after)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: If [<<Arg>>]
.method public static EqualFalseRhs(Z)I
.registers 3
const v0, 0x0
const v1, 0x3
if-eq p0, v0, :return
const v1, 0x5
:return
return v1
.end method
## CHECK-START: int SmaliTests.EqualFalseLhs(boolean) instruction_simplifier (before)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: <<Const0:i\d+>> IntConstant 0
## CHECK-DAG: <<Cond:z\d+>> Equal [<<Const0>>,<<Arg>>]
## CHECK-DAG: If [<<Cond>>]
## CHECK-START: int SmaliTests.EqualFalseLhs(boolean) instruction_simplifier (after)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: If [<<Arg>>]
.method public static EqualFalseLhs(Z)I
.registers 3
const v0, 0x0
const v1, 0x3
if-eq v0, p0, :return
const v1, 0x5
:return
return v1
.end method
## CHECK-START: int SmaliTests.NotEqualTrueRhs(boolean) instruction_simplifier (before)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: <<Const1:i\d+>> IntConstant 1
## CHECK-DAG: <<Cond:z\d+>> NotEqual [<<Arg>>,<<Const1>>]
## CHECK-DAG: If [<<Cond>>]
## CHECK-START: int SmaliTests.NotEqualTrueRhs(boolean) instruction_simplifier (after)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: If [<<Arg>>]
.method public static NotEqualTrueRhs(Z)I
.registers 3
const v0, 0x1
const v1, 0x3
if-ne p0, v0, :return
const v1, 0x5
:return
return v1
.end method
## CHECK-START: int SmaliTests.NotEqualTrueLhs(boolean) instruction_simplifier (before)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: <<Const1:i\d+>> IntConstant 1
## CHECK-DAG: <<Cond:z\d+>> NotEqual [<<Const1>>,<<Arg>>]
## CHECK-DAG: If [<<Cond>>]
## CHECK-START: int SmaliTests.NotEqualTrueLhs(boolean) instruction_simplifier (after)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: If [<<Arg>>]
.method public static NotEqualTrueLhs(Z)I
.registers 3
const v0, 0x1
const v1, 0x3
if-ne v0, p0, :return
const v1, 0x5
:return
return v1
.end method
## CHECK-START: int SmaliTests.NotEqualFalseRhs(boolean) instruction_simplifier (before)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: <<Const0:i\d+>> IntConstant 0
## CHECK-DAG: <<Cond:z\d+>> NotEqual [<<Arg>>,<<Const0>>]
## CHECK-DAG: If [<<Cond>>]
## CHECK-START: int SmaliTests.NotEqualFalseRhs(boolean) instruction_simplifier (after)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: If [<<Arg>>]
.method public static NotEqualFalseRhs(Z)I
.registers 3
const v0, 0x0
const v1, 0x5
if-ne p0, v0, :return
const v1, 0x3
:return
return v1
.end method
## CHECK-START: int SmaliTests.NotEqualFalseLhs(boolean) instruction_simplifier (before)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: <<Const0:i\d+>> IntConstant 0
## CHECK-DAG: <<Cond:z\d+>> NotEqual [<<Const0>>,<<Arg>>]
## CHECK-DAG: If [<<Cond>>]
## CHECK-START: int SmaliTests.NotEqualFalseLhs(boolean) instruction_simplifier (after)
## CHECK-DAG: <<Arg:z\d+>> ParameterValue
## CHECK-DAG: If [<<Arg>>]
.method public static NotEqualFalseLhs(Z)I
.registers 3
const v0, 0x0
const v1, 0x5
if-ne v0, p0, :return
const v1, 0x3
:return
return v1
.end method
## CHECK-START: int SmaliTests.AddSubConst(int) instruction_simplifier (before)
## CHECK-DAG: <<ArgValue:i\d+>> ParameterValue
## CHECK-DAG: <<Const7:i\d+>> IntConstant 7
## CHECK-DAG: <<Const8:i\d+>> IntConstant 8
## CHECK-DAG: <<Add:i\d+>> Add [<<ArgValue>>,<<Const7>>]
## CHECK-DAG: <<Sub:i\d+>> Sub [<<Add>>,<<Const8>>]
## CHECK-DAG: Return [<<Sub>>]
## CHECK-START: int SmaliTests.AddSubConst(int) instruction_simplifier (after)
## CHECK-DAG: <<ArgValue:i\d+>> ParameterValue
## CHECK-DAG: <<ConstM1:i\d+>> IntConstant -1
## CHECK-DAG: <<Add:i\d+>> Add [<<ArgValue>>,<<ConstM1>>]
## CHECK-DAG: Return [<<Add>>]
.method public static AddSubConst(I)I
.registers 3
.prologue
add-int/lit8 v0, p0, 7
const/16 v1, 8
sub-int v0, v0, v1
return v0
.end method
## CHECK-START: int SmaliTests.SubAddConst(int) instruction_simplifier (before)
## CHECK-DAG: <<ArgValue:i\d+>> ParameterValue
## CHECK-DAG: <<Const3:i\d+>> IntConstant 3
## CHECK-DAG: <<Const4:i\d+>> IntConstant 4
## CHECK-DAG: <<Sub:i\d+>> Sub [<<ArgValue>>,<<Const3>>]
## CHECK-DAG: <<Add:i\d+>> Add [<<Sub>>,<<Const4>>]
## CHECK-DAG: Return [<<Add>>]
## CHECK-START: int SmaliTests.SubAddConst(int) instruction_simplifier (after)
## CHECK-DAG: <<ArgValue:i\d+>> ParameterValue
## CHECK-DAG: <<Const1:i\d+>> IntConstant 1
## CHECK-DAG: <<Add:i\d+>> Add [<<ArgValue>>,<<Const1>>]
## CHECK-DAG: Return [<<Add>>]
.method public static SubAddConst(I)I
.registers 2
.prologue
const/4 v0, 3
sub-int v0, p0, v0
add-int/lit8 v0, v0, 4
return v0
.end method
## CHECK-START: int SmaliTests.SubSubConst1(int) instruction_simplifier (before)
## CHECK-DAG: <<ArgValue:i\d+>> ParameterValue
## CHECK-DAG: <<Const9:i\d+>> IntConstant 9
## CHECK-DAG: <<Const10:i\d+>> IntConstant 10
## CHECK-DAG: <<Sub1:i\d+>> Sub [<<ArgValue>>,<<Const9>>]
## CHECK-DAG: <<Sub2:i\d+>> Sub [<<Sub1>>,<<Const10>>]
## CHECK-DAG: Return [<<Sub2>>]
## CHECK-START: int SmaliTests.SubSubConst1(int) instruction_simplifier (after)
## CHECK-DAG: <<ArgValue:i\d+>> ParameterValue
## CHECK-DAG: <<ConstM19:i\d+>> IntConstant -19
## CHECK-DAG: <<Add:i\d+>> Add [<<ArgValue>>,<<ConstM19>>]
## CHECK-DAG: Return [<<Add>>]
.method public static SubSubConst1(I)I
.registers 3
.prologue
const/16 v1, 9
sub-int v0, p0, v1
const/16 v1, 10
sub-int v0, v0, v1
return v0
.end method
## CHECK-START: int SmaliTests.SubSubConst2(int) instruction_simplifier (before)
## CHECK-DAG: <<ArgValue:i\d+>> ParameterValue
## CHECK-DAG: <<Const11:i\d+>> IntConstant 11
## CHECK-DAG: <<Const12:i\d+>> IntConstant 12
## CHECK-DAG: <<Sub1:i\d+>> Sub [<<Const11>>,<<ArgValue>>]
## CHECK-DAG: <<Sub2:i\d+>> Sub [<<Sub1>>,<<Const12>>]
## CHECK-DAG: Return [<<Sub2>>]
## CHECK-START: int SmaliTests.SubSubConst2(int) instruction_simplifier (after)
## CHECK-DAG: <<ArgValue:i\d+>> ParameterValue
## CHECK-DAG: <<ConstM1:i\d+>> IntConstant -1
## CHECK-DAG: <<Sub:i\d+>> Sub [<<ConstM1>>,<<ArgValue>>]
## CHECK-DAG: Return [<<Sub>>]
.method public static SubSubConst2(I)I
.registers 3
.prologue
rsub-int/lit8 v0, p0, 11
const/16 v1, 12
sub-int v0, v0, v1
return v0
.end method
## CHECK-START: int SmaliTests.SubSubConst3(int) instruction_simplifier (before)
## CHECK-DAG: <<ArgValue:i\d+>> ParameterValue
## CHECK-DAG: <<Const15:i\d+>> IntConstant 15
## CHECK-DAG: <<Const16:i\d+>> IntConstant 16
## CHECK-DAG: <<Sub1:i\d+>> Sub [<<ArgValue>>,<<Const16>>]
## CHECK-DAG: <<Sub2:i\d+>> Sub [<<Const15>>,<<Sub1>>]
## CHECK-DAG: Return [<<Sub2>>]
## CHECK-START: int SmaliTests.SubSubConst3(int) instruction_simplifier (after)
## CHECK-DAG: <<ArgValue:i\d+>> ParameterValue
## CHECK-DAG: <<Const31:i\d+>> IntConstant 31
## CHECK-DAG: <<Sub:i\d+>> Sub [<<Const31>>,<<ArgValue>>]
## CHECK-DAG: Return [<<Sub>>]
.method public static SubSubConst3(I)I
.registers 2
.prologue
const/16 v0, 16
sub-int v0, p0, v0
rsub-int/lit8 v0, v0, 15
return v0
.end method