/** @file The driver wrappers BlockMmio protocol instances to produce Block I/O Protocol instances. Copyright (c) 2007 - 2012, Intel Corporation. All rights reserved.<BR> This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ #include "BlockIo.h" EFI_DRIVER_BINDING_PROTOCOL gBlockIoDriverBinding = { BlockIoDriverBindingSupported, BlockIoDriverBindingStart, BlockIoDriverBindingStop, 0x11, NULL, NULL }; /** Reset the block device. This function implements EFI_BLOCK_IO_PROTOCOL.Reset(). It resets the block device hardware. ExtendedVerification is ignored in this implementation. @param This Indicates a pointer to the calling context. @param ExtendedVerification Indicates that the driver may perform a more exhaustive verification operation of the device during reset. @retval EFI_SUCCESS The block device was reset. @retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be reset. **/ EFI_STATUS EFIAPI BlockIoReset ( IN EFI_BLOCK_IO_PROTOCOL *This, IN BOOLEAN ExtendedVerification ) { return EFI_SUCCESS; } /** Reads the requested number of blocks from the device. This function implements EFI_BLOCK_IO_PROTOCOL.ReadBlocks(). It reads the requested number of blocks from the device. All the blocks are read, or an error is returned. @param This Indicates a pointer to the calling context. @param ReadData If TRUE then read data. If FALSE then write data. @param MediaId The media ID that the read request is for. @param Lba The starting logical block address to read from on the device. @param BufferSize The size of the Buffer in bytes. This must be a multiple of the intrinsic block size of the device. @param Buffer A pointer to the destination buffer for the data. The caller is responsible for either having implicit or explicit ownership of the buffer. @retval EFI_SUCCESS The data was read correctly from the device. @retval EFI_DEVICE_ERROR The device reported an error while attempting to perform the read operation. @retval EFI_NO_MEDIA There is no media in the device. @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic block size of the device. @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid, or the buffer is not on proper alignment. **/ EFI_STATUS EFIAPI ReadOrWriteBlocks ( IN EFI_BLOCK_IO_PROTOCOL *This, IN BOOLEAN ReadData, IN UINT32 MediaId, IN EFI_LBA Lba, IN UINTN BufferSize, OUT VOID *Buffer ) { EFI_STATUS Status; BLOCK_MMIO_TO_BLOCK_IO_DEVICE *Private; UINTN TotalBlock; EFI_BLOCK_IO_MEDIA *Media; UINT64 Address; UINTN Count; EFI_CPU_IO_PROTOCOL_IO_MEM CpuAccessFunction; // // First, validate the parameters // if ((Buffer == NULL) || (BufferSize == 0)) { return EFI_INVALID_PARAMETER; } // // Get private data structure // Private = PRIVATE_FROM_BLOCK_IO (This); Media = Private->BlockMmio->Media; // // BufferSize must be a multiple of the intrinsic block size of the device. // if (ModU64x32 (BufferSize, Media->BlockSize) != 0) { return EFI_BAD_BUFFER_SIZE; } TotalBlock = (UINTN) DivU64x32 (BufferSize, Media->BlockSize); // // Make sure the range to read is valid. // if (Lba + TotalBlock - 1 > Media->LastBlock) { return EFI_INVALID_PARAMETER; } if (!(Media->MediaPresent)) { return EFI_NO_MEDIA; } if (MediaId != Media->MediaId) { return EFI_MEDIA_CHANGED; } Address = Private->BlockMmio->BaseAddress; Address += MultU64x32 (Lba, Media->BlockSize); Count = BufferSize >> 3; if (ReadData) { CpuAccessFunction = Private->CpuIo->Mem.Read; } else { CpuAccessFunction = Private->CpuIo->Mem.Write; } Status = (CpuAccessFunction) ( Private->CpuIo, EfiCpuIoWidthUint64, Address, Count, Buffer ); return Status; } /** Reads the requested number of blocks from the device. This function implements EFI_BLOCK_IO_PROTOCOL.ReadBlocks(). It reads the requested number of blocks from the device. All the blocks are read, or an error is returned. @param This Indicates a pointer to the calling context. @param MediaId The media ID that the read request is for. @param Lba The starting logical block address to read from on the device. @param BufferSize The size of the Buffer in bytes. This must be a multiple of the intrinsic block size of the device. @param Buffer A pointer to the destination buffer for the data. The caller is responsible for either having implicit or explicit ownership of the buffer. @retval EFI_SUCCESS The data was read correctly from the device. @retval EFI_DEVICE_ERROR The device reported an error while attempting to perform the read operation. @retval EFI_NO_MEDIA There is no media in the device. @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic block size of the device. @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid, or the buffer is not on proper alignment. **/ EFI_STATUS EFIAPI BlockIoReadBlocks ( IN EFI_BLOCK_IO_PROTOCOL *This, IN UINT32 MediaId, IN EFI_LBA Lba, IN UINTN BufferSize, OUT VOID *Buffer ) { DEBUG ((EFI_D_INFO, "BlockIo (MMIO) ReadBlocks: lba=0x%Lx, size=0x%Lx\n", Lba, (UINT64)BufferSize)); return ReadOrWriteBlocks ( This, TRUE, MediaId, Lba, BufferSize, Buffer ); } /** Writes a specified number of blocks to the device. This function implements EFI_BLOCK_IO_PROTOCOL.WriteBlocks(). It writes a specified number of blocks to the device. All blocks are written, or an error is returned. @param This Indicates a pointer to the calling context. @param MediaId The media ID that the write request is for. @param Lba The starting logical block address to be written. @param BufferSize The size of the Buffer in bytes. This must be a multiple of the intrinsic block size of the device. @param Buffer Pointer to the source buffer for the data. @retval EFI_SUCCESS The data were written correctly to the device. @retval EFI_WRITE_PROTECTED The device cannot be written to. @retval EFI_NO_MEDIA There is no media in the device. @retval EFI_MEDIA_CHANGED The MediaId is not for the current media. @retval EFI_DEVICE_ERROR The device reported an error while attempting to perform the write operation. @retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the intrinsic block size of the device. @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid, or the buffer is not on proper alignment. **/ EFI_STATUS EFIAPI BlockIoWriteBlocks ( IN EFI_BLOCK_IO_PROTOCOL *This, IN UINT32 MediaId, IN EFI_LBA Lba, IN UINTN BufferSize, IN VOID *Buffer ) { DEBUG ((EFI_D_INFO, "BlockIo (MMIO) WriteBlocks: lba=0x%Lx, size=0x%Lx\n", Lba, (UINT64)BufferSize)); return ReadOrWriteBlocks ( This, FALSE, MediaId, Lba, BufferSize, Buffer ); } /** Flushes all modified data to a physical block device. @param This Indicates a pointer to the calling context. @retval EFI_SUCCESS All outstanding data were written correctly to the device. @retval EFI_DEVICE_ERROR The device reported an error while attempting to write data. @retval EFI_NO_MEDIA There is no media in the device. **/ EFI_STATUS EFIAPI BlockIoFlushBlocks ( IN EFI_BLOCK_IO_PROTOCOL *This ) { return EFI_SUCCESS; } /** Initialize data for device that does not support multiple LUNSs. @param This The Driver Binding Protocol instance. @param Controller The device to initialize. @param BlockMmio Pointer to USB_MASS_TRANSPORT. @param Context Parameter for USB_MASS_DEVICE.Context. @retval EFI_SUCCESS Initialization succeeds. @retval Other Initialization fails. **/ EFI_STATUS BlockIoInit ( IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE Controller ) { EFI_STATUS Status; BLOCK_MMIO_TO_BLOCK_IO_DEVICE *Private; BLOCK_MMIO_PROTOCOL *BlockMmio; Private = (BLOCK_MMIO_TO_BLOCK_IO_DEVICE*) AllocateZeroPool (sizeof (*Private)); ASSERT (Private != NULL); Status = gBS->LocateProtocol ( &gEfiCpuIo2ProtocolGuid, NULL, (VOID **) &(Private->CpuIo) ); ASSERT_EFI_ERROR (Status); Status = gBS->OpenProtocol ( Controller, &gBlockMmioProtocolGuid, (VOID **) &BlockMmio, This->DriverBindingHandle, Controller, EFI_OPEN_PROTOCOL_BY_DRIVER ); if (EFI_ERROR (Status)) { DEBUG ((EFI_D_ERROR, "BlockIoInit: OpenBlockMmioProtocol By Driver (%r)\n", Status)); goto ON_ERROR; } DEBUG ((EFI_D_INFO, "BlockMmio: %p\n", BlockMmio)); DEBUG ((EFI_D_INFO, "BlockMmio->Media->LastBlock: 0x%lx\n", BlockMmio->Media->LastBlock)); Private->Signature = BLOCK_MMIO_TO_BLOCK_IO_SIGNATURE; Private->Controller = Controller; Private->BlockMmio = BlockMmio; Private->BlockIo.Media = BlockMmio->Media; Private->BlockIo.Reset = BlockIoReset; Private->BlockIo.ReadBlocks = BlockIoReadBlocks; Private->BlockIo.WriteBlocks = BlockIoWriteBlocks; Private->BlockIo.FlushBlocks = BlockIoFlushBlocks; DEBUG ((EFI_D_INFO, "Private->BlockIo.Media->LastBlock: 0x%lx\n", Private->BlockIo.Media->LastBlock)); Status = gBS->InstallProtocolInterface ( &Controller, &gEfiBlockIoProtocolGuid, EFI_NATIVE_INTERFACE, &Private->BlockIo ); if (EFI_ERROR (Status)) { goto ON_ERROR; } return EFI_SUCCESS; ON_ERROR: if (Private != NULL) { FreePool (Private); } if (BlockMmio != NULL) { gBS->CloseProtocol ( Controller, &gBlockMmioProtocolGuid, This->DriverBindingHandle, Controller ); } return Status; } /** Check whether the controller is a supported USB mass storage. @param This The USB mass storage driver binding protocol. @param Controller The controller handle to check. @param RemainingDevicePath The remaining device path. @retval EFI_SUCCESS The driver supports this controller. @retval other This device isn't supported. **/ EFI_STATUS EFIAPI BlockIoDriverBindingSupported ( IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE Controller, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath ) { EFI_STATUS Status; BLOCK_MMIO_PROTOCOL *BlockMmio; Status = gBS->OpenProtocol ( Controller, &gBlockMmioProtocolGuid, (VOID **) &BlockMmio, This->DriverBindingHandle, Controller, EFI_OPEN_PROTOCOL_BY_DRIVER ); if (EFI_ERROR (Status)) { return Status; } gBS->CloseProtocol ( Controller, &gBlockMmioProtocolGuid, This->DriverBindingHandle, Controller ); return Status; } /** Starts the USB mass storage device with this driver. This function consumes USB I/O Portocol, intializes USB mass storage device, installs Block I/O Protocol, and submits Asynchronous Interrupt Transfer to manage the USB mass storage device. @param This The USB mass storage driver binding protocol. @param Controller The USB mass storage device to start on @param RemainingDevicePath The remaining device path. @retval EFI_SUCCESS This driver supports this device. @retval EFI_UNSUPPORTED This driver does not support this device. @retval EFI_DEVICE_ERROR This driver cannot be started due to device Error. @retval EFI_OUT_OF_RESOURCES Can't allocate memory resources. @retval EFI_ALREADY_STARTED This driver has been started. **/ EFI_STATUS EFIAPI BlockIoDriverBindingStart ( IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE Controller, IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath ) { EFI_STATUS Status; Status = BlockIoInit (This, Controller); if (EFI_ERROR (Status)) { DEBUG ((EFI_D_ERROR, "BlockIoDriverBindingStart: BlockIoInit (%r)\n", Status)); return Status; } DEBUG ((EFI_D_INIT, "BlockIoDriverBindingStart: Successfully started\n")); return Status; } /** Stop controlling the device. @param This The USB mass storage driver binding @param Controller The device controller controlled by the driver. @param NumberOfChildren The number of children of this device @param ChildHandleBuffer The buffer of children handle. @retval EFI_SUCCESS The driver stopped from controlling the device. @retval EFI_DEVICE_ERROR The device could not be stopped due to a device error. @retval EFI_UNSUPPORTED Block I/O Protocol is not installed on Controller. @retval Others Failed to stop the driver **/ EFI_STATUS EFIAPI BlockIoDriverBindingStop ( IN EFI_DRIVER_BINDING_PROTOCOL *This, IN EFI_HANDLE Controller, IN UINTN NumberOfChildren, IN EFI_HANDLE *ChildHandleBuffer ) { EFI_STATUS Status; BLOCK_MMIO_TO_BLOCK_IO_DEVICE *Private; Private = PRIVATE_FROM_BLOCK_IO (This); // // Uninstall Block I/O protocol from the device handle, // then call the transport protocol to stop itself. // Status = gBS->UninstallProtocolInterface ( Controller, &gEfiBlockIoProtocolGuid, &Private->BlockIo ); if (EFI_ERROR (Status)) { return Status; } gBS->CloseProtocol ( Controller, &gBlockMmioProtocolGuid, This->DriverBindingHandle, Controller ); FreePool (Private); DEBUG ((EFI_D_INFO, "Successfully stopped BlockIo on BlockMmio\n")); return EFI_SUCCESS; } /** Entrypoint of Block MMIO to Block IO Driver. This function is the entrypoint of USB Mass Storage Driver. It installs Driver Binding Protocol together with Component Name Protocols. @param ImageHandle The firmware allocated handle for the EFI image. @param SystemTable A pointer to the EFI System Table. @retval EFI_SUCCESS The entry point is executed successfully. **/ EFI_STATUS EFIAPI BlockMmioToBlockIoEntryPoint ( IN EFI_HANDLE ImageHandle, IN EFI_SYSTEM_TABLE *SystemTable ) { EFI_STATUS Status; // // Install driver binding protocol // Status = EfiLibInstallDriverBindingComponentName2 ( ImageHandle, SystemTable, &gBlockIoDriverBinding, ImageHandle, &gBlockMmioToBlockIoComponentName, &gBlockMmioToBlockIoComponentName2 ); ASSERT_EFI_ERROR (Status); return EFI_SUCCESS; }