/** @file
Driver Binding code and its private helpers for the virtio-net driver.
Copyright (C) 2013, Red Hat, Inc.
Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed and made available
under the terms and conditions of the BSD License which accompanies this
distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT
WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <Library/BaseMemoryLib.h>
#include <Library/DevicePathLib.h>
#include <Library/MemoryAllocationLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include "VirtioNet.h"
#define RECEIVE_FILTERS_NO_MCAST ((UINT32) ( \
EFI_SIMPLE_NETWORK_RECEIVE_UNICAST | \
EFI_SIMPLE_NETWORK_RECEIVE_BROADCAST | \
EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS \
))
/*
Temporarily enable then reset the virtio-net device in order to retrieve
configuration values needed by Simple Network Protocol and Simple Network
Mode fields.
Only VirtioNetSnpPopulate() may call this function.
If the function fails for any reason, the virtio-net device is moved to
VSTAT_FAILED instead of being reset. This serves only informative purposes
for the host side.
param[in,out] Dev The VNET_DEV structure being created for
the virtio-net device.
param[out] MacAddress MAC address configured by the host.
param[out] MediaPresentSupported Link status is made available by the host.
param[out] MediaPresent If link status is made available by the
host, the current link status is stored in
*MediaPresent. Otherwise MediaPresent is
unused.
@retval EFI_UNSUPPORTED The host doesn't supply a MAC address.
@return Status codes from VirtIo protocol members.
@retval EFI_SUCCESS Configuration values retrieved.
*/
STATIC
EFI_STATUS
EFIAPI
VirtioNetGetFeatures (
IN OUT VNET_DEV *Dev,
OUT EFI_MAC_ADDRESS *MacAddress,
OUT BOOLEAN *MediaPresentSupported,
OUT BOOLEAN *MediaPresent
)
{
EFI_STATUS Status;
UINT8 NextDevStat;
UINT64 Features;
UINTN MacIdx;
UINT16 LinkStatus;
//
// Interrogate the device for features (virtio-0.9.5, 2.2.1 Device
// Initialization Sequence), but don't complete setting it up.
//
NextDevStat = 0; // step 1 -- reset device
Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);
if (EFI_ERROR (Status)) {
return Status;
}
NextDevStat |= VSTAT_ACK; // step 2 -- acknowledge device presence
Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);
if (EFI_ERROR (Status)) {
goto YieldDevice;
}
NextDevStat |= VSTAT_DRIVER; // step 3 -- we know how to drive it
Status = Dev->VirtIo->SetDeviceStatus (Dev->VirtIo, NextDevStat);
if (EFI_ERROR (Status)) {
goto YieldDevice;
}
//
// step 4a -- retrieve and validate features
//
Status = Dev->VirtIo->GetDeviceFeatures (Dev->VirtIo, &Features);
if (EFI_ERROR (Status)) {
goto YieldDevice;
}
//
// get MAC address byte-wise
//
if ((Features & VIRTIO_NET_F_MAC) == 0) {
Status = EFI_UNSUPPORTED;
goto YieldDevice;
}
for (MacIdx = 0; MacIdx < SIZE_OF_VNET (Mac); ++MacIdx) {
Status = Dev->VirtIo->ReadDevice (Dev->VirtIo,
OFFSET_OF_VNET (Mac) + MacIdx, // Offset
1, // FieldSize
1, // BufferSize
&MacAddress->Addr[MacIdx] // Buffer
);
if (EFI_ERROR (Status)) {
goto YieldDevice;
}
}
//
// check if link status is reported, and if so, what the link status is
//
if ((Features & VIRTIO_NET_F_STATUS) == 0) {
*MediaPresentSupported = FALSE;
}
else {
*MediaPresentSupported = TRUE;
Status = VIRTIO_CFG_READ (Dev, LinkStatus, &LinkStatus);
if (EFI_ERROR (Status)) {
goto YieldDevice;
}
*MediaPresent = (BOOLEAN) ((LinkStatus & VIRTIO_NET_S_LINK_UP) != 0);
}
YieldDevice:
Dev->VirtIo->SetDeviceStatus (Dev->VirtIo,
EFI_ERROR (Status) ? VSTAT_FAILED : 0);
return Status;
}
/**
Set up the Simple Network Protocol fields, the Simple Network Mode fields,
and the Exit Boot Services Event of the virtio-net driver instance.
This function may only be called by VirtioNetDriverBindingStart().
@param[in,out] Dev The VNET_DEV driver instance being created for the
virtio-net device.
@return Status codes from the CreateEvent() boot service or the
VirtioNetGetFeatures() function.
@retval EFI_SUCCESS Configuration successful.
*/
STATIC
EFI_STATUS
EFIAPI
VirtioNetSnpPopulate (
IN OUT VNET_DEV *Dev
)
{
EFI_STATUS Status;
//
// We set up a function here that is asynchronously callable by an
// external application to check if there are any packets available for
// reception. The least urgent task priority level we can specify for such a
// "software interrupt" is TPL_CALLBACK.
//
// TPL_CALLBACK is also the maximum TPL an SNP implementation is allowed to
// run at (see 6.1 Event, Timer, and Task Priority Services in the UEFI
// Specification 2.3.1+errC).
//
// Since we raise our TPL to TPL_CALLBACK in every single function that
// accesses the device, and the external application also queues its interest
// for received packets at the same TPL_CALLBACK, in effect the
// VirtioNetIsPacketAvailable() function will never interrupt any
// device-accessing driver function, it will be scheduled in isolation.
//
// TPL_CALLBACK (which basically this entire driver runs at) is allowed
// for "[l]ong term operations (such as file system operations and disk
// I/O)". Because none of our functions block, we'd satisfy an even stronger
// requirement.
//
Status = gBS->CreateEvent (EVT_NOTIFY_WAIT, TPL_CALLBACK,
&VirtioNetIsPacketAvailable, Dev, &Dev->Snp.WaitForPacket);
if (EFI_ERROR (Status)) {
return Status;
}
Dev->Snp.Revision = EFI_SIMPLE_NETWORK_PROTOCOL_REVISION;
Dev->Snp.Start = &VirtioNetStart;
Dev->Snp.Stop = &VirtioNetStop;
Dev->Snp.Initialize = &VirtioNetInitialize;
Dev->Snp.Reset = &VirtioNetReset;
Dev->Snp.Shutdown = &VirtioNetShutdown;
Dev->Snp.ReceiveFilters = &VirtioNetReceiveFilters;
Dev->Snp.StationAddress = &VirtioNetStationAddress;
Dev->Snp.Statistics = &VirtioNetStatistics;
Dev->Snp.MCastIpToMac = &VirtioNetMcastIpToMac;
Dev->Snp.NvData = &VirtioNetNvData;
Dev->Snp.GetStatus = &VirtioNetGetStatus;
Dev->Snp.Transmit = &VirtioNetTransmit;
Dev->Snp.Receive = &VirtioNetReceive;
Dev->Snp.Mode = &Dev->Snm;
Dev->Snm.State = EfiSimpleNetworkStopped;
Dev->Snm.HwAddressSize = SIZE_OF_VNET (Mac);
Dev->Snm.MediaHeaderSize = SIZE_OF_VNET (Mac) + // dst MAC
SIZE_OF_VNET (Mac) + // src MAC
2; // Ethertype
Dev->Snm.MaxPacketSize = 1500;
Dev->Snm.NvRamSize = 0;
Dev->Snm.NvRamAccessSize = 0;
Dev->Snm.ReceiveFilterMask = RECEIVE_FILTERS_NO_MCAST;
Dev->Snm.ReceiveFilterSetting = RECEIVE_FILTERS_NO_MCAST;
Dev->Snm.MaxMCastFilterCount = 0;
Dev->Snm.MCastFilterCount = 0;
Dev->Snm.IfType = 1; // ethernet
Dev->Snm.MacAddressChangeable = FALSE;
Dev->Snm.MultipleTxSupported = TRUE;
ASSERT (SIZE_OF_VNET (Mac) <= sizeof (EFI_MAC_ADDRESS));
Status = VirtioNetGetFeatures (Dev, &Dev->Snm.CurrentAddress,
&Dev->Snm.MediaPresentSupported, &Dev->Snm.MediaPresent);
if (EFI_ERROR (Status)) {
goto CloseWaitForPacket;
}
CopyMem (&Dev->Snm.PermanentAddress, &Dev->Snm.CurrentAddress,
SIZE_OF_VNET (Mac));
SetMem (&Dev->Snm.BroadcastAddress, SIZE_OF_VNET (Mac), 0xFF);
//
// VirtioNetExitBoot() is queued by ExitBootServices(); its purpose is to
// cancel any pending virtio requests. The TPL_CALLBACK reasoning is
// identical to the one above. There's one difference: this kind of
// event is "globally visible", which means it can be signalled as soon as
// we create it. We haven't raised our TPL here, hence VirtioNetExitBoot()
// could be entered immediately. VirtioNetExitBoot() checks Dev->Snm.State,
// so we're safe.
//
Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_CALLBACK,
&VirtioNetExitBoot, Dev, &Dev->ExitBoot);
if (EFI_ERROR (Status)) {
goto CloseWaitForPacket;
}
return EFI_SUCCESS;
CloseWaitForPacket:
gBS->CloseEvent (Dev->Snp.WaitForPacket);
return Status;
}
/**
Release any resources allocated by VirtioNetSnpPopulate().
This function may only be called by VirtioNetDriverBindingStart(), when
rolling back a partial, failed driver instance creation, and by
VirtioNetDriverBindingStop(), when disconnecting a virtio-net device from the
driver.
@param[in,out] Dev The VNET_DEV driver instance being destroyed.
*/
STATIC
VOID
EFIAPI
VirtioNetSnpEvacuate (
IN OUT VNET_DEV *Dev
)
{
//
// This function runs either at TPL_CALLBACK already (from
// VirtioNetDriverBindingStop()), or it is part of a teardown following
// a partial, failed construction in VirtioNetDriverBindingStart(), when
// WaitForPacket was never accessible to the world.
//
gBS->CloseEvent (Dev->ExitBoot);
gBS->CloseEvent (Dev->Snp.WaitForPacket);
}
/**
Tests to see if this driver supports a given controller. If a child device is
provided, it further tests to see if this driver supports creating a handle
for the specified child device.
This function checks to see if the driver specified by This supports the
device specified by ControllerHandle. Drivers will typically use the device
path attached to ControllerHandle and/or the services from the bus I/O
abstraction attached to ControllerHandle to determine if the driver supports
ControllerHandle. This function may be called many times during platform
initialization. In order to reduce boot times, the tests performed by this
function must be very small, and take as little time as possible to execute.
This function must not change the state of any hardware devices, and this
function must be aware that the device specified by ControllerHandle may
already be managed by the same driver or a different driver. This function
must match its calls to AllocatePages() with FreePages(), AllocatePool() with
FreePool(), and OpenProtocol() with CloseProtocol(). Because ControllerHandle
may have been previously started by the same driver, if a protocol is already
in the opened state, then it must not be closed with CloseProtocol(). This is
required to guarantee the state of ControllerHandle is not modified by this
function.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL
instance.
@param[in] ControllerHandle The handle of the controller to test. This
handle must support a protocol interface
that supplies an I/O abstraction to the
driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a
device path. This parameter is ignored by
device drivers, and is optional for bus
drivers. For bus drivers, if this parameter
is not NULL, then the bus driver must
determine if the bus controller specified by
ControllerHandle and the child controller
specified by RemainingDevicePath are both
supported by this bus driver.
@retval EFI_SUCCESS The device specified by ControllerHandle and
RemainingDevicePath is supported by the
driver specified by This.
@retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
RemainingDevicePath is already being managed
by the driver specified by This.
@retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
RemainingDevicePath is already being managed
by a different driver or an application that
requires exclusive access. Currently not
implemented.
@retval EFI_UNSUPPORTED The device specified by ControllerHandle and
RemainingDevicePath is not supported by the
driver specified by This.
**/
STATIC
EFI_STATUS
EFIAPI
VirtioNetDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE DeviceHandle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
VIRTIO_DEVICE_PROTOCOL *VirtIo;
//
// Attempt to open the device with the VirtIo set of interfaces. On success,
// the protocol is "instantiated" for the VirtIo device. Covers duplicate open
// attempts (EFI_ALREADY_STARTED).
//
Status = gBS->OpenProtocol (
DeviceHandle, // candidate device
&gVirtioDeviceProtocolGuid, // for generic VirtIo access
(VOID **)&VirtIo, // handle to instantiate
This->DriverBindingHandle, // requestor driver identity
DeviceHandle, // ControllerHandle, according to
// the UEFI Driver Model
EFI_OPEN_PROTOCOL_BY_DRIVER // get exclusive VirtIo access to
// the device; to be released
);
if (EFI_ERROR (Status)) {
return Status;
}
if (VirtIo->SubSystemDeviceId != VIRTIO_SUBSYSTEM_NETWORK_CARD) {
Status = EFI_UNSUPPORTED;
}
//
// We needed VirtIo access only transitorily, to see whether we support the
// device or not.
//
gBS->CloseProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,
This->DriverBindingHandle, DeviceHandle);
return Status;
}
/**
Starts a device controller or a bus controller.
The Start() function is designed to be invoked from the EFI boot service
ConnectController(). As a result, much of the error checking on the
parameters to Start() has been moved into this common boot service. It is
legal to call Start() from other locations, but the following calling
restrictions must be followed, or the system behavior will not be
deterministic.
1. ControllerHandle must be a valid EFI_HANDLE.
2. If RemainingDevicePath is not NULL, then it must be a pointer to a
naturally aligned EFI_DEVICE_PATH_PROTOCOL.
3. Prior to calling Start(), the Supported() function for the driver
specified by This must have been called with the same calling parameters,
and Supported() must have returned EFI_SUCCESS.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL
instance.
@param[in] ControllerHandle The handle of the controller to start. This
handle must support a protocol interface
that supplies an I/O abstraction to the
driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a
device path. This parameter is ignored by
device drivers, and is optional for bus
drivers. For a bus driver, if this parameter
is NULL, then handles for all the children
of Controller are created by this driver.
If this parameter is not NULL and the first
Device Path Node is not the End of Device
Path Node, then only the handle for the
child device specified by the first Device
Path Node of RemainingDevicePath is created
by this driver. If the first Device Path
Node of RemainingDevicePath is the End of
Device Path Node, no child handle is created
by this driver.
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a
device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a
lack of resources.
@retval Others The driver failded to start the device.
**/
STATIC
EFI_STATUS
EFIAPI
VirtioNetDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE DeviceHandle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
VNET_DEV *Dev;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
MAC_ADDR_DEVICE_PATH MacNode;
VOID *ChildVirtIo;
//
// allocate space for the driver instance
//
Dev = (VNET_DEV *) AllocateZeroPool (sizeof *Dev);
if (Dev == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Dev->Signature = VNET_SIG;
Status = gBS->OpenProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,
(VOID **)&Dev->VirtIo, This->DriverBindingHandle,
DeviceHandle, EFI_OPEN_PROTOCOL_BY_DRIVER);
if (EFI_ERROR (Status)) {
goto FreeVirtioNet;
}
//
// now we can run a basic one-shot virtio-net initialization required to
// retrieve the MAC address
//
Status = VirtioNetSnpPopulate (Dev);
if (EFI_ERROR (Status)) {
goto CloseVirtIo;
}
//
// get the device path of the virtio-net device -- one-shot open
//
Status = gBS->OpenProtocol (DeviceHandle, &gEfiDevicePathProtocolGuid,
(VOID **)&DevicePath, This->DriverBindingHandle,
DeviceHandle, EFI_OPEN_PROTOCOL_GET_PROTOCOL);
if (EFI_ERROR (Status)) {
goto Evacuate;
}
//
// create another device path that has the MAC address appended
//
MacNode.Header.Type = MESSAGING_DEVICE_PATH;
MacNode.Header.SubType = MSG_MAC_ADDR_DP;
SetDevicePathNodeLength (&MacNode, sizeof MacNode);
CopyMem (&MacNode.MacAddress, &Dev->Snm.CurrentAddress,
sizeof (EFI_MAC_ADDRESS));
MacNode.IfType = Dev->Snm.IfType;
Dev->MacDevicePath = AppendDevicePathNode (DevicePath, &MacNode.Header);
if (Dev->MacDevicePath == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Evacuate;
}
//
// create a child handle with the Simple Network Protocol and the new
// device path installed on it
//
Status = gBS->InstallMultipleProtocolInterfaces (&Dev->MacHandle,
&gEfiSimpleNetworkProtocolGuid, &Dev->Snp,
&gEfiDevicePathProtocolGuid, Dev->MacDevicePath,
NULL);
if (EFI_ERROR (Status)) {
goto FreeMacDevicePath;
}
//
// make a note that we keep this device open with VirtIo for the sake of this
// child
//
Status = gBS->OpenProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,
&ChildVirtIo, This->DriverBindingHandle,
Dev->MacHandle, EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER);
if (EFI_ERROR (Status)) {
goto UninstallMultiple;
}
return EFI_SUCCESS;
UninstallMultiple:
gBS->UninstallMultipleProtocolInterfaces (Dev->MacHandle,
&gEfiDevicePathProtocolGuid, Dev->MacDevicePath,
&gEfiSimpleNetworkProtocolGuid, &Dev->Snp,
NULL);
FreeMacDevicePath:
FreePool (Dev->MacDevicePath);
Evacuate:
VirtioNetSnpEvacuate (Dev);
CloseVirtIo:
gBS->CloseProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,
This->DriverBindingHandle, DeviceHandle);
FreeVirtioNet:
FreePool (Dev);
return Status;
}
/**
Stops a device controller or a bus controller.
The Stop() function is designed to be invoked from the EFI boot service
DisconnectController(). As a result, much of the error checking on the
parameters to Stop() has been moved into this common boot service. It is
legal to call Stop() from other locations, but the following calling
restrictions must be followed, or the system behavior will not be
deterministic.
1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous
call to this same driver's Start() function.
2. The first NumberOfChildren handles of ChildHandleBuffer must all be a
valid EFI_HANDLE. In addition, all of these handles must have been created
in this driver's Start() function, and the Start() function must have
called OpenProtocol() on ControllerHandle with an Attribute of
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL
instance.
@param[in] ControllerHandle A handle to the device being stopped. The
handle must support a bus specific I/O
protocol for the driver to use to stop the
device.
@param[in] NumberOfChildren The number of child device handles in
ChildHandleBuffer.
@param[in] ChildHandleBuffer An array of child handles to be freed. May be
NULL if NumberOfChildren is 0.
@retval EFI_SUCCESS The device was stopped.
@retval EFI_DEVICE_ERROR The device could not be stopped due to a device
error.
**/
STATIC
EFI_STATUS
EFIAPI
VirtioNetDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE DeviceHandle,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
)
{
if (NumberOfChildren > 0) {
//
// free all resources for whose access we need the child handle, because
// the child handle is going away
//
EFI_STATUS Status;
EFI_SIMPLE_NETWORK_PROTOCOL *Snp;
VNET_DEV *Dev;
EFI_TPL OldTpl;
ASSERT (NumberOfChildren == 1);
Status = gBS->OpenProtocol (ChildHandleBuffer[0],
&gEfiSimpleNetworkProtocolGuid, (VOID **)&Snp,
This->DriverBindingHandle, DeviceHandle,
EFI_OPEN_PROTOCOL_GET_PROTOCOL);
ASSERT_EFI_ERROR (Status);
Dev = VIRTIO_NET_FROM_SNP (Snp);
//
// prevent any interference with WaitForPacket
//
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
ASSERT (Dev->MacHandle == ChildHandleBuffer[0]);
if (Dev->Snm.State != EfiSimpleNetworkStopped) {
//
// device in use, cannot stop driver instance
//
Status = EFI_DEVICE_ERROR;
}
else {
gBS->CloseProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,
This->DriverBindingHandle, Dev->MacHandle);
gBS->UninstallMultipleProtocolInterfaces (Dev->MacHandle,
&gEfiDevicePathProtocolGuid, Dev->MacDevicePath,
&gEfiSimpleNetworkProtocolGuid, &Dev->Snp,
NULL);
FreePool (Dev->MacDevicePath);
VirtioNetSnpEvacuate (Dev);
FreePool (Dev);
}
gBS->RestoreTPL (OldTpl);
return Status;
}
//
// release remaining resources, tied directly to the parent handle
//
gBS->CloseProtocol (DeviceHandle, &gVirtioDeviceProtocolGuid,
This->DriverBindingHandle, DeviceHandle);
return EFI_SUCCESS;
}
EFI_DRIVER_BINDING_PROTOCOL gVirtioNetDriverBinding = {
&VirtioNetDriverBindingSupported,
&VirtioNetDriverBindingStart,
&VirtioNetDriverBindingStop,
0x10,
NULL,
NULL
};