/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.hardware.audio@2.0;
import android.hardware.audio.common@2.0;
import android.hardware.audio.effect@2.0::IEffect;
interface IStream {
typedef android.hardware.audio@2.0::Result Result;
/**
* Return the frame size (number of bytes per sample).
*
* @return frameSize frame size in bytes.
*/
getFrameSize() generates (uint64_t frameSize);
/**
* Return the frame count of the buffer. Calling this method is equivalent
* to getting AUDIO_PARAMETER_STREAM_FRAME_COUNT on the legacy HAL.
*
* @return count frame count.
*/
getFrameCount() generates (uint64_t count);
/**
* Return the size of input/output buffer in bytes for this stream.
* It must be a multiple of the frame size.
*
* @return buffer buffer size in bytes.
*/
getBufferSize() generates (uint64_t bufferSize);
/**
* Return the sampling rate in Hz.
*
* @return sampleRateHz sample rate in Hz.
*/
getSampleRate() generates (uint32_t sampleRateHz);
/**
* Return supported sampling rates of the stream. Calling this method is
* equivalent to getting AUDIO_PARAMETER_STREAM_SUP_SAMPLING_RATES on the
* legacy HAL.
*
* @return sampleRateHz supported sample rates.
*/
getSupportedSampleRates() generates (vec<uint32_t> sampleRates);
/**
* Sets the sampling rate of the stream. Calling this method is equivalent
* to setting AUDIO_PARAMETER_STREAM_SAMPLING_RATE on the legacy HAL.
*
* @param sampleRateHz sample rate in Hz.
* @return retval operation completion status.
*/
setSampleRate(uint32_t sampleRateHz) generates (Result retval);
/**
* Return the channel mask of the stream.
*
* @return mask channel mask.
*/
getChannelMask() generates (AudioChannelMask mask);
/**
* Return supported channel masks of the stream. Calling this method is
* equivalent to getting AUDIO_PARAMETER_STREAM_SUP_CHANNELS on the legacy
* HAL.
*
* @return masks supported audio masks.
*/
getSupportedChannelMasks() generates (vec<AudioChannelMask> masks);
/**
* Sets the channel mask of the stream. Calling this method is equivalent to
* setting AUDIO_PARAMETER_STREAM_CHANNELS on the legacy HAL.
*
* @param format audio format.
* @return retval operation completion status.
*/
setChannelMask(AudioChannelMask mask) generates (Result retval);
/**
* Return the audio format of the stream.
*
* @return format audio format.
*/
getFormat() generates (AudioFormat format);
/**
* Return supported audio formats of the stream. Calling this method is
* equivalent to getting AUDIO_PARAMETER_STREAM_SUP_FORMATS on the legacy
* HAL.
*
* @return formats supported audio formats.
*/
getSupportedFormats() generates (vec<AudioFormat> formats);
/**
* Sets the audio format of the stream. Calling this method is equivalent to
* setting AUDIO_PARAMETER_STREAM_FORMAT on the legacy HAL.
*
* @param format audio format.
* @return retval operation completion status.
*/
setFormat(AudioFormat format) generates (Result retval);
/**
* Convenience method for retrieving several stream parameters in
* one transaction.
*
* @return sampleRateHz sample rate in Hz.
* @return mask channel mask.
* @return format audio format.
*/
getAudioProperties() generates (
uint32_t sampleRateHz, AudioChannelMask mask, AudioFormat format);
/**
* Applies audio effect to the stream.
*
* @param effectId effect ID (obtained from IEffectsFactory.createEffect) of
* the effect to apply.
* @return retval operation completion status.
*/
addEffect(uint64_t effectId) generates (Result retval);
/**
* Stops application of the effect to the stream.
*
* @param effectId effect ID (obtained from IEffectsFactory.createEffect) of
* the effect to remove.
* @return retval operation completion status.
*/
removeEffect(uint64_t effectId) generates (Result retval);
/**
* Put the audio hardware input/output into standby mode.
* Driver must exit from standby mode at the next I/O operation.
*
* @return retval operation completion status.
*/
standby() generates (Result retval);
/**
* Return the set of device(s) which this stream is connected to.
*
* @return device set of device(s) which this stream is connected to.
*/
getDevice() generates (AudioDevice device);
/**
* Connects the stream to the device.
*
* This method must only be used for HALs that do not support
* 'IDevice.createAudioPatch' method. Calling this method is
* equivalent to setting AUDIO_PARAMETER_STREAM_ROUTING in the legacy HAL
* interface.
*
* @param address device to connect the stream to.
* @return retval operation completion status.
*/
setDevice(DeviceAddress address) generates (Result retval);
/**
* Notifies the stream about device connection state. Calling this method is
* equivalent to setting AUDIO_PARAMETER_DEVICE_[DIS]CONNECT on the legacy
* HAL.
*
* @param address audio device specification.
* @param connected whether the device is connected.
* @return retval operation completion status.
*/
setConnectedState(DeviceAddress address, bool connected)
generates (Result retval);
/**
* Sets the HW synchronization source. Calling this method is equivalent to
* setting AUDIO_PARAMETER_STREAM_HW_AV_SYNC on the legacy HAL.
*
* @param hwAvSync HW synchronization source
* @return retval operation completion status.
*/
setHwAvSync(AudioHwSync hwAvSync) generates (Result retval);
/**
* Generic method for retrieving vendor-specific parameter values.
* The framework does not interpret the parameters, they are passed
* in an opaque manner between a vendor application and HAL.
*
* @param keys parameter keys.
* @return retval operation completion status.
* @return parameters parameter key value pairs.
*/
getParameters(vec<string> keys)
generates (Result retval, vec<ParameterValue> parameters);
/**
* Generic method for setting vendor-specific parameter values.
* The framework does not interpret the parameters, they are passed
* in an opaque manner between a vendor application and HAL.
*
* @param parameters parameter key value pairs.
* @return retval operation completion status.
*/
setParameters(vec<ParameterValue> parameters) generates (Result retval);
/**
* Dumps information about the stream into the provided file descriptor.
* This is used for the dumpsys facility.
*
* @param fd dump file descriptor.
*/
debugDump(handle fd);
/**
* Called by the framework to start a stream operating in mmap mode.
* createMmapBuffer() must be called before calling start().
* Function only implemented by streams operating in mmap mode.
*
* @return retval OK in case the success.
* NOT_SUPPORTED on non mmap mode streams
* INVALID_STATE if called out of sequence
*/
start() generates (Result retval);
/**
* Called by the framework to stop a stream operating in mmap mode.
* Function only implemented by streams operating in mmap mode.
*
* @return retval OK in case the succes.
* NOT_SUPPORTED on non mmap mode streams
* INVALID_STATE if called out of sequence
*/
stop() generates (Result retval) ;
/**
* Called by the framework to retrieve information on the mmap buffer used for audio
* samples transfer.
* Function only implemented by streams operating in mmap mode.
*
* @param minSizeFrames minimum buffer size requested. The actual buffer
* size returned in struct MmapBufferInfo can be larger.
* @return retval OK in case the success.
* NOT_SUPPORTED on non mmap mode streams
* NOT_INITIALIZED in case of memory allocation error
* INVALID_ARGUMENTS if the requested buffer size is too large
* INVALID_STATE if called out of sequence
* @return info a MmapBufferInfo struct containing information on the MMMAP buffer created.
*/
createMmapBuffer(int32_t minSizeFrames)
generates (Result retval, MmapBufferInfo info);
/**
* Called by the framework to read current read/write position in the mmap buffer
* with associated time stamp.
* Function only implemented by streams operating in mmap mode.
*
* @return retval OK in case the success.
* NOT_SUPPORTED on non mmap mode streams
* INVALID_STATE if called out of sequence
* @return position a MmapPosition struct containing current HW read/write position in frames
* with associated time stamp.
*/
getMmapPosition()
generates (Result retval, MmapPosition position);
/**
* Called by the framework to deinitialize the stream and free up
* all the currently allocated resources. It is recommended to close
* the stream on the client side as soon as it is becomes unused.
*
* @return retval OK in case the success.
* NOT_SUPPORTED if called on IStream instead of input or
* output stream interface.
* INVALID_STATE if the stream was already closed.
*/
close() generates (Result retval);
};