/*
* Copyright (C) 2016 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package android.hardware.gnss@1.0;
/**
* The interface is required for the HAL to communicate certain information
* like status and location info back to the platform, the platform implements
* the interfaces and passes a handle to the HAL.
*/
interface IGnssCallback {
/** Flags for the gnssSetCapabilities callback. */
@export(name="", value_prefix="GPS_CAPABILITY_")
enum Capabilities : uint32_t {
/**
* GNSS HAL schedules fixes for RECURRENCE_PERIODIC mode.
* If this is not set, then the framework will use 1000ms for
* minInterval and will call start() and stop() to schedule the GNSS.
*/
SCHEDULING = 1 << 0,
/** GNSS supports MS-Based AGNSS mode */
MSB = 1 << 1,
/** GNSS supports MS-Assisted AGNSS mode */
MSA = 1 << 2,
/** GNSS supports single-shot fixes */
SINGLE_SHOT = 1 << 3,
/** GNSS supports on demand time injection */
ON_DEMAND_TIME = 1 << 4,
/** GNSS supports Geofencing */
GEOFENCING = 1 << 5,
/** GNSS supports Measurements for at least GPS. */
MEASUREMENTS = 1 << 6,
/** GNSS supports Navigation Messages */
NAV_MESSAGES = 1 << 7
};
/** GNSS status event values. */
@export(name="", value_prefix="GPS_STATUS_")
enum GnssStatusValue : uint8_t {
/** GNSS status unknown. */
NONE = 0,
/** GNSS has begun navigating. */
SESSION_BEGIN = 1,
/** GNSS has stopped navigating. */
SESSION_END = 2,
/** GNSS has powered on but is not navigating. */
ENGINE_ON = 3,
/** GNSS is powered off. */
ENGINE_OFF = 4
};
/**
* Flags that indicate information about the satellite
*/
@export(name="", value_prefix="GNSS_SV_FLAGS_")
enum GnssSvFlags : uint8_t {
NONE = 0,
HAS_EPHEMERIS_DATA = 1 << 0,
HAS_ALMANAC_DATA = 1 << 1,
USED_IN_FIX = 1 << 2,
HAS_CARRIER_FREQUENCY = 1 << 3
};
struct GnssSvInfo {
/**
* Pseudo-random or satellite ID number for the satellite, a.k.a. Space Vehicle (SV), or
* FCN/OSN number for Glonass. The distinction is made by looking at constellation field.
* Values must be in the range of:
*
* - GNSS: 1-32
* - SBAS: 120-151, 183-192
* - GLONASS: 1-24, the orbital slot number (OSN), if known. Or, if not:
* 93-106, the frequency channel number (FCN) (-7 to +6) offset by
* + 100
* i.e. report an FCN of -7 as 93, FCN of 0 as 100, and FCN of +6
* as 106.
* - QZSS: 193-200
* - Galileo: 1-36
* - Beidou: 1-37
*/
int16_t svid;
/**
* Defines the constellation of the given SV.
*/
GnssConstellationType constellation;
/**
* Carrier-to-noise density in dB-Hz, typically in the range [0, 63].
* It contains the measured C/N0 value for the signal at the antenna port.
*
* This is a mandatory value.
*/
float cN0Dbhz;
/** Elevation of SV in degrees. */
float elevationDegrees;
/** Azimuth of SV in degrees. */
float azimuthDegrees;
/**
* Carrier frequency of the signal tracked, for example it can be the
* GPS central frequency for L1 = 1575.45 MHz, or L2 = 1227.60 MHz, L5 =
* 1176.45 MHz, varying GLO channels, etc. If the field is not set, it
* is the primary common use central frequency, e.g. L1 = 1575.45 MHz
* for GPS.
*
* For an L1, L5 receiver tracking a satellite on L1 and L5 at the same
* time, two GnssSvInfo structs must be reported for this same
* satellite, in one of the structs, all the values related
* to L1 must be filled, and in the other all of the values related to
* L5 must be filled.
*
* If the data is available, gnssClockFlags must contain
* HAS_CARRIER_FREQUENCY.
*/
float carrierFrequencyHz;
/**
* Contains additional data about the given SV.
*/
bitfield<GnssSvFlags> svFlag;
};
/**
* Represents SV status.
*/
struct GnssSvStatus {
/**
* Number of GNSS SVs currently visible, refers to the SVs stored in sv_list
*/
uint32_t numSvs;
/**
* Pointer to an array of SVs information for all GNSS constellations,
* except GNSS, which is reported using svList
*/
GnssSvInfo[GnssMax:SVS_COUNT] gnssSvList;
};
/**
* Called when a GNSS location is available.
*
* @param location Location information from HAL.
*/
gnssLocationCb(GnssLocation location);
/**
* Called to communicate the status of the GNSS engine.
*
* @param status Status information from HAL.
*/
gnssStatusCb(GnssStatusValue status);
/**
* @param svInfo SV status information from HAL.
*/
gnssSvStatusCb(GnssSvStatus svInfo);
/**
* Called when NMEA data is available.
* Callback for reporting NMEA sentences.
*
* @param timestamp Marks the instance of reporting.
* @param nmea Follows standard NMEA 0183. Each sentence begins with a '$'
* and ends with a carriage return/line feed sequence and can be no longer
* than 80 characters of visible text (plus the line terminators). The data
* is contained within this single line with data items separated by commas.
* The data itself is just ascii text and may extend over multiple sentences
* in certain specialized instances but is normally fully contained in one
* variable length sentence. The data may vary in the amount of precision
* contained in the message. For example time might be indicated to decimal
* parts of a second or location may be shown with 3 or even 4 digits after
* the decimal point. Programs that read the data must only use the commas
* to determine the field boundaries and not depend on column positions.
* There is a provision for a checksum at the end of each sentence which may
* or may not be checked by the unit that reads the data. The checksum field
* consists of a '*' and two hex digits representing an 8 bit exclusive OR
* of all characters between, but not including, the '$' and '*'.
*/
gnssNmeaCb(GnssUtcTime timestamp, string nmea);
/**
* Callback to inform framework of the GNSS engine's capabilities.
*
* @param capabilities Capability parameter is a bit field of
* the Capabilities enum.
*/
gnssSetCapabilitesCb(bitfield<Capabilities> capabilities);
/**
* Callback utility for acquiring the GNSS wakelock. This can be used to prevent
* the CPU from suspending while handling GNSS events.
*/
gnssAcquireWakelockCb();
/** Callback utility for releasing the GNSS wakelock. */
gnssReleaseWakelockCb();
/** Callback for requesting NTP time */
gnssRequestTimeCb();
/**
* Provides information about how new the underlying GPS/GNSS hardware and
* software is.
*
* This information will be available for Android Test Applications. If a GNSS
* HAL does not provide this information, it will be considered "2015 or
* earlier".
*
* If a GNSS HAL does provide this information, then newer years will need to
* meet newer CTS standards. E.g. if the date are 2016 or above, then N+ level
* GnssMeasurement support will be verified.
*/
struct GnssSystemInfo{
/**
* year in which the last update was made to the underlying hardware/firmware
* used to capture GNSS signals, e.g. 2016
*/
uint16_t yearOfHw;
};
/**
* Callback to inform framework of the engine's hardware version information.
*
* @param info GnssSystemInfo about the GPS/GNSS hardware.
*/
gnssSetSystemInfoCb(GnssSystemInfo info);
};