#ifndef _SDE_DRM_H_
#define _SDE_DRM_H_
/*
* Each top level structure is of the following format:
*
* struct {
* uint64_t version;
* union {
* struct version v1;
* ...
* } u;
*
* Each top level structure maintains independent versioning and is defined
* as follows:
*
* #define STRUCTNAME_V1 0x1
* ...
* #define STRUCTNAME_Vn 0x###
* #define STRUCTNAME_VERSION STRUCTNAME_Vn
*
* Version fields should ALWAYS be declared as type uint64_t. This is because
* 64-bit compilers tend to pad the structure to 64-bit align the start of
* union structure members. Having an explicit 64-bit version helps to maintain
* consistent structure layout between 32-bit and 64-bit compilers.
*
* Updates to the structures UAPI should always define a new sub-structure to
* place within the union, and update STRUCTNAME_VERSION to reference the
* new version number.
*
* User mode code should always set the 'version' field to STRUCTNAME_VERSION.
*/
/* Total number of supported color planes */
#define SDE_MAX_PLANES 4
/* Total number of parameterized detail enhancer mapping curves */
#define SDE_MAX_DE_CURVES 3
/* Y/RGB and UV filter configuration */
#define FILTER_EDGE_DIRECTED_2D 0x0
#define FILTER_CIRCULAR_2D 0x1
#define FILTER_SEPARABLE_1D 0x2
#define FILTER_BILINEAR 0x3
/* Alpha filters */
#define FILTER_ALPHA_DROP_REPEAT 0x0
#define FILTER_ALPHA_BILINEAR 0x1
#define FILTER_ALPHA_2D 0x3
/* Blend filters */
#define FILTER_BLEND_CIRCULAR_2D 0x0
#define FILTER_BLEND_SEPARABLE_1D 0x1
/* LUT configuration flags */
#define SCALER_LUT_SWAP 0x1
#define SCALER_LUT_DIR_WR 0x2
#define SCALER_LUT_Y_CIR_WR 0x4
#define SCALER_LUT_UV_CIR_WR 0x8
#define SCALER_LUT_Y_SEP_WR 0x10
#define SCALER_LUT_UV_SEP_WR 0x20
/**
* Blend operations for "blend_op" property
*
* @SDE_DRM_BLEND_OP_NOT_DEFINED: No blend operation defined for the layer.
* @SDE_DRM_BLEND_OP_OPAQUE: Apply a constant blend operation. The layer
* would appear opaque in case fg plane alpha
* is 0xff.
* @SDE_DRM_BLEND_OP_PREMULTIPLIED: Apply source over blend rule. Layer already
* has alpha pre-multiplication done. If the fg
* plane alpha is less than 0xff, apply
* modulation as well. This operation is
* intended on layers having alpha channel.
* @SDE_DRM_BLEND_OP_COVERAGE: Apply source over blend rule. Layer is not
* alpha pre-multiplied. Apply
* pre-multiplication. If fg plane alpha is
* less than 0xff, apply modulation as well.
* @SDE_DRM_BLEND_OP_MAX: Used to track maximum blend operation
* possible by mdp.
*/
#define SDE_DRM_BLEND_OP_NOT_DEFINED 0
#define SDE_DRM_BLEND_OP_OPAQUE 1
#define SDE_DRM_BLEND_OP_PREMULTIPLIED 2
#define SDE_DRM_BLEND_OP_COVERAGE 3
#define SDE_DRM_BLEND_OP_MAX 4
/**
* Bit masks for "src_config" property
* construct bitmask via (1UL << SDE_DRM_<flag>)
*/
#define SDE_DRM_DEINTERLACE 0 /* Specifies interlaced input */
/* DRM bitmasks are restricted to 0..63 */
#define SDE_DRM_BITMASK_COUNT 64
/**
* struct sde_drm_pix_ext_v1 - version 1 of pixel ext structure
* @num_ext_pxls_lr: Number of total horizontal pixels
* @num_ext_pxls_tb: Number of total vertical lines
* @left_ftch: Number of extra pixels to overfetch from left
* @right_ftch: Number of extra pixels to overfetch from right
* @top_ftch: Number of extra lines to overfetch from top
* @btm_ftch: Number of extra lines to overfetch from bottom
* @left_rpt: Number of extra pixels to repeat from left
* @right_rpt: Number of extra pixels to repeat from right
* @top_rpt: Number of extra lines to repeat from top
* @btm_rpt: Number of extra lines to repeat from bottom
*/
struct sde_drm_pix_ext_v1 {
/*
* Number of pixels ext in left, right, top and bottom direction
* for all color components.
*/
int32_t num_ext_pxls_lr[SDE_MAX_PLANES];
int32_t num_ext_pxls_tb[SDE_MAX_PLANES];
/*
* Number of pixels needs to be overfetched in left, right, top
* and bottom directions from source image for scaling.
*/
int32_t left_ftch[SDE_MAX_PLANES];
int32_t right_ftch[SDE_MAX_PLANES];
int32_t top_ftch[SDE_MAX_PLANES];
int32_t btm_ftch[SDE_MAX_PLANES];
/*
* Number of pixels needs to be repeated in left, right, top and
* bottom directions for scaling.
*/
int32_t left_rpt[SDE_MAX_PLANES];
int32_t right_rpt[SDE_MAX_PLANES];
int32_t top_rpt[SDE_MAX_PLANES];
int32_t btm_rpt[SDE_MAX_PLANES];
};
/**
* Enable mask bits for "scaler" property
*
* @SDE_DRM_SCALER_PIX_EXT: pix ext sub-structures are valid
* @SDE_DRM_SCALER_SCALER_2: scaler 2 sub-structures are valid
* @SDE_DRM_SCALER_SCALER_3: scaler 3 sub-structures are valid
* @SDE_DRM_SCALER_DECIMATE: decimation fields are valid
*/
#define SDE_DRM_SCALER_PIX_EXT 0x1
#define SDE_DRM_SCALER_SCALER_2 0x2
#define SDE_DRM_SCALER_SCALER_3 0x4
#define SDE_DRM_SCALER_DECIMATE 0x8
/**
* struct sde_drm_scaler_v1 - version 1 of struct sde_drm_scaler
* @lr: Pixel extension settings for left/right
* @tb: Pixel extension settings for top/botton
* @init_phase_x: Initial scaler phase values for x
* @phase_step_x: Phase step values for x
* @init_phase_y: Initial scaler phase values for y
* @phase_step_y: Phase step values for y
* @horz_filter: Horizontal filter array
* @vert_filter: Vertical filter array
*/
struct sde_drm_scaler_v1 {
/*
* General definitions
*/
uint32_t enable;
/*
* Pix ext settings
*/
struct sde_drm_pix_ext_v1 pe;
/*
* Decimation settings
*/
uint32_t horz_decimate;
uint32_t vert_decimate;
/*
* Phase settings
*/
int32_t init_phase_x[SDE_MAX_PLANES];
int32_t phase_step_x[SDE_MAX_PLANES];
int32_t init_phase_y[SDE_MAX_PLANES];
int32_t phase_step_y[SDE_MAX_PLANES];
/*
* Filter type to be used for scaling in horizontal and vertical
* directions
*/
uint32_t horz_filter[SDE_MAX_PLANES];
uint32_t vert_filter[SDE_MAX_PLANES];
};
/**
* struct sde_drm_de_v1 - version 1 of detail enhancer structure
* @enable: Enables/disables detail enhancer
* @sharpen_level1: Sharpening strength for noise
* @sharpen_level2: Sharpening strength for context
* @clip: Clip coefficient
* @limit: Detail enhancer limit factor
* @thr_quiet: Quite zone threshold
* @thr_dieout: Die-out zone threshold
* @thr_low: Linear zone left threshold
* @thr_high: Linear zone right threshold
* @prec_shift: Detail enhancer precision
* @adjust_a: Mapping curves A coefficients
* @adjust_b: Mapping curves B coefficients
* @adjust_c: Mapping curves C coefficients
*/
struct sde_drm_de_v1 {
uint32_t enable;
int16_t sharpen_level1;
int16_t sharpen_level2;
uint16_t clip;
uint16_t limit;
uint16_t thr_quiet;
uint16_t thr_dieout;
uint16_t thr_low;
uint16_t thr_high;
uint16_t prec_shift;
int16_t adjust_a[SDE_MAX_DE_CURVES];
int16_t adjust_b[SDE_MAX_DE_CURVES];
int16_t adjust_c[SDE_MAX_DE_CURVES];
};
/**
* struct sde_drm_scaler_v2 - version 2 of struct sde_drm_scaler
* @enable: Scaler enable
* @dir_en: Detail enhancer enable
* @pe: Pixel extension settings
* @horz_decimate: Horizontal decimation factor
* @vert_decimate: Vertical decimation factor
* @init_phase_x: Initial scaler phase values for x
* @phase_step_x: Phase step values for x
* @init_phase_y: Initial scaler phase values for y
* @phase_step_y: Phase step values for y
* @preload_x: Horizontal preload value
* @preload_y: Vertical preload value
* @src_width: Source width
* @src_height: Source height
* @dst_width: Destination width
* @dst_height: Destination height
* @y_rgb_filter_cfg: Y/RGB plane filter configuration
* @uv_filter_cfg: UV plane filter configuration
* @alpha_filter_cfg: Alpha filter configuration
* @blend_cfg: Selection of blend coefficients
* @lut_flag: LUT configuration flags
* @dir_lut_idx: 2d 4x4 LUT index
* @y_rgb_cir_lut_idx: Y/RGB circular LUT index
* @uv_cir_lut_idx: UV circular LUT index
* @y_rgb_sep_lut_idx: Y/RGB separable LUT index
* @uv_sep_lut_idx: UV separable LUT index
* @de: Detail enhancer settings
*/
struct sde_drm_scaler_v2 {
/* General definitions*/
uint32_t enable;
uint32_t dir_en;
/* Pix ext settings*/
struct sde_drm_pix_ext_v1 pe;
/* Decimation settings*/
uint32_t horz_decimate;
uint32_t vert_decimate;
/* Phase settings*/
int32_t init_phase_x[SDE_MAX_PLANES];
int32_t phase_step_x[SDE_MAX_PLANES];
int32_t init_phase_y[SDE_MAX_PLANES];
int32_t phase_step_y[SDE_MAX_PLANES];
uint32_t preload_x[SDE_MAX_PLANES];
uint32_t preload_y[SDE_MAX_PLANES];
uint32_t src_width[SDE_MAX_PLANES];
uint32_t src_height[SDE_MAX_PLANES];
uint32_t dst_width;
uint32_t dst_height;
uint32_t y_rgb_filter_cfg;
uint32_t uv_filter_cfg;
uint32_t alpha_filter_cfg;
uint32_t blend_cfg;
uint32_t lut_flag;
uint32_t dir_lut_idx;
/* for Y(RGB) and UV planes*/
uint32_t y_rgb_cir_lut_idx;
uint32_t uv_cir_lut_idx;
uint32_t y_rgb_sep_lut_idx;
uint32_t uv_sep_lut_idx;
/* Detail enhancer settings */
struct sde_drm_de_v1 de;
};
/* Scaler version definition, see top of file for guidelines */
#define SDE_DRM_SCALER_V1 0x1
#define SDE_DRM_SCALER_VERSION SDE_DRM_SCALER_V1
/**
* struct sde_drm_scaler - scaler structure
* @version: Structure version, set to SDE_DRM_SCALER_VERSION
* @v1: Version 1 of scaler structure
*/
struct sde_drm_scaler {
uint64_t version;
union {
struct sde_drm_scaler_v1 v1;
};
};
/*
* Define constants for struct sde_drm_csc
*/
#define SDE_CSC_MATRIX_COEFF_SIZE 9
#define SDE_CSC_CLAMP_SIZE 6
#define SDE_CSC_BIAS_SIZE 3
/* CSC version definition, see top of file for guidelines */
#define SDE_DRM_CSC_V1 0x1
#define SDE_DRM_CSC_VERSION SDE_DRM_CSC_V1
/**
* struct sde_drm_csc_v1 - version 1 of struct sde_drm_csc
* @ctm_coeff: Matrix coefficients, in S31.32 format
* @pre_bias: Pre-bias array values
* @post_bias: Post-bias array values
* @pre_clamp: Pre-clamp array values
* @post_clamp: Post-clamp array values
*/
struct sde_drm_csc_v1 {
int64_t ctm_coeff[SDE_CSC_MATRIX_COEFF_SIZE];
uint32_t pre_bias[SDE_CSC_BIAS_SIZE];
uint32_t post_bias[SDE_CSC_BIAS_SIZE];
uint32_t pre_clamp[SDE_CSC_CLAMP_SIZE];
uint32_t post_clamp[SDE_CSC_CLAMP_SIZE];
};
/**
* struct sde_drm_csc - CSC configuration structure
* @version: Structure version, set to SDE_DRM_CSC_VERSION
* @v1: Version 1 of csc structure
*/
struct sde_drm_csc {
uint64_t version;
union {
struct sde_drm_csc_v1 v1;
};
};
/* Writeback Config version definition */
#define SDE_DRM_WB_CFG 0x1
/* SDE_DRM_WB_CONFIG_FLAGS - Writeback configuration flags */
#define SDE_DRM_WB_CFG_FLAGS_CONNECTED (1<<0)
/**
* struct sde_drm_wb_cfg - Writeback configuration structure
* @flags: see DRM_MSM_WB_CONFIG_FLAGS
* @connector_id: writeback connector identifier
* @count_modes: Count of modes in modes_ptr
* @modes: Pointer to struct drm_mode_modeinfo
*/
struct sde_drm_wb_cfg {
uint32_t flags;
uint32_t connector_id;
uint32_t count_modes;
uint64_t modes;
};
#endif /* _SDE_DRM_H_ */