<?Xm version="1.0" encoding="utf-8"?>
<!--
~ Copyright (C) 2015 The Android Open Source Project
~
~ Licensed under the Apache License, Version 2.0 (the "License");
~ you may not use this file except in compliance with the License.
~ You may obtain a copy of the License at
~
~ http://www.apache.org/licenses/LICENSE-2.0
~
~ Unless required by applicable law or agreed to in writing, software
~ distributed under the License is distributed on an "AS IS" BASIS,
~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
~ See the License for the specific language governing permissions and
~ limitations under the License.
-->
<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
<!-- Name of this application. It appears in TV app UI, as one of available TV inputs. -->
<string name="bt_app_name">TV Tuner</string>
<!-- Name of this application when one uses USB tuners. It appears in TV app UI, as one of
available TV inputs. -->
<string name="ut_app_name">USB TV Tuner</string>
<!-- Name of this application when one uses network tuners. It appears in TV app UI, as one of
available TV inputs. -->
<string name="nt_app_name">Network TV Tuner (BETA)</string>
<!-- Message shown when the scanning process is being canceled by a user and the scanning
process needs the time to wait to finish the processing -->
<string name="ut_setup_cancel">Please wait to finish processing</string>
<!-- Message shown when the scanned channels became invalid due to incompatible changes
found across application versions, hence a user is required to rescan the channels -->
<string name="ut_rescan_needed">Tuner software has been recently updated. Please re-scan the
channels.</string>
<!-- Message that says audio of the current channel is not available due to surround sound
of TV device disabled -->
<string name="ut_surround_sound_disabled">Enable surround sound in system sound settings to enable audio</string>
<!-- Message that says audio of the current channel is not available due to AC3 passthrough is not usable -->
<string name="audio_passthrough_not_supported">Cannot play audio. Please try another TV</string>
<!-- Usb Tuner setup common UI breadcrumb -->
<string name="ut_setup_breadcrumb">Channel tuner setup</string>
<!-- Title for TV Tuner main setup menu when no channel exists -->
<string name="bt_setup_new_title">TV Tuner setup</string>
<!-- Title for USB tuner main setup menu when no channel exists -->
<string name="ut_setup_new_title">USB channel tuner setup</string>
<!-- Title for network tuner main setup menu when no channel exists -->
<string name="nt_setup_new_title">Network tuner setup</string>
<!-- Description for TV tuner main setup menu when no channel exists -->
<string name="bt_setup_new_description">Verify your TV is connected to a TV signal
source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or
direction to receive the most channels. For best results, place it high and near a
window.</string>
<!-- Description for USB tuner main setup menu when no channel exists -->
<string name="ut_setup_new_description">Verify the USB tuner is plugged in and connected
to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its
placement or direction to receive the most channels. For best results,
place it high and near a window.</string>
<!-- Description for network tuner main setup menu when no channel exists -->
<string name="nt_setup_new_description">Verify the network tuner is powered on and connected
to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its
placement or direction to receive the most channels. For best results,
place it high and near a window.</string>
<!-- Menu items for USB tuner main setup menu when no channel exists -->
<string-array name="ut_setup_new_choices">
<!-- Continue setup -->
<item>Continue</item>
<!-- Exit setup -->
<item>Not now</item>
</string-array>
<!-- Title for tuner main setup menu when channel exists already -->
<string name="bt_setup_again_title">Rerun channel setup?</string>
<!-- Description for TV tuner main setup menu when channel exists already -->
<string name="bt_setup_again_description">This will remove the channels found from the TV
tuner and scan for new channels again.\n\nVerify your TV is connected to a TV signal
source.\n\nIf using an over-the-air antenna, you may need to adjust its placement or
direction to receive the most channels. For best results, place it high and near a
window.</string>
<!-- Description for USB tuner main setup menu when channel exists already -->
<string name="ut_setup_again_description">This will remove the channels found from the USB
tuner and scan for new channels again.\n\nVerify the USB tuner is plugged in and connected
to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust its
placement or direction to receive the most channels. For best results, place it high and
near a window.</string>
<!-- Description for network tuner main setup menu when channel exists already -->
<string name="nt_setup_again_description">This will remove the channels found from the network
tuner and scan for new channels again.\n\nVerify the network tuner is powered on and
connected to a TV signal source.\n\nIf using an over-the-air antenna, you may need to adjust
its placement or direction to receive the most channels. For best results, place it high and
near a window.</string>
<!-- Menu items for USB tuner main setup menu when channel exists already -->
<string-array name="ut_setup_again_choices">
<!-- Continue setup -->
<item>Continue</item>
<!-- Exit setup -->
<item>Cancel</item>
</string-array>
<!-- Title for connection type selection menu -->
<string name="ut_connection_title">Select the connection type</string>
<!-- Description for connection type selection menu -->
<string name="ut_connection_description">Choose Antenna if there is an external antenna
connected to the tuner. Choose Cable if your channels come from a cable service provider.
If you are not sure, both types will be scanned, but this may take longer.</string>
<!-- Menu items for connection type selection menu -->
<string-array name="ut_connection_choices">
<!-- Signal coming from the antenna that carries over-the-air, terrestrial channels -->
<item>Antenna</item>
<!-- Signal for cable television channels -->
<item>Cable</item>
<!-- Not sure what type of connection is provided for channel scanning -->
<item>Not sure</item>
<item translatable="false">Development only</item>
</string-array>
<!-- Title for channel scanning menu. Use this title with built-in tuners -->
<string name="bt_channel_scan">TV tuner setup</string>
<!-- Title for channel scanning menu. Use this title with USB tuners -->
<string name="ut_channel_scan">USB channel tuner setup</string>
<!-- Title for channel scanning menu. Use this title with network tuners -->
<string name="nt_channel_scan">Network channel tuner setup</string>
<!-- Message that says channel is not yet scanned during channel scanning process -->
<string name="ut_channel_scan_time">This may take several minutes</string>
<!-- Message that says Tuner is not available -->
<string name="ut_channel_scan_tuner_unavailable">Tuner is temporarily not available or already
used by recording.</string>
<!-- Message that says channels are found during channel scanning process -->
<plurals name="ut_channel_scan_message">
<item quantity="one">%1$d channel found</item>
<item quantity="other">%1$d channels found</item>
</plurals>
<!-- Title for a button which will stop channel scanning process -->
<string name="ut_stop_channel_scan">STOP CHANNEL SCAN</string>
<!-- Title for lineup selection menu when TV lineups are found -->
<string name="ut_lineup_title_lineups_found" >Select a TV lineup</string>
<!-- Description for lineup selection menu when TV lineups are found.-->
<string name="ut_lineup_description_lineups_found" >Choose how you receive your TV signal.</string>
<!-- Title for lineup selection menu when no TV lineups is found -->
<string name="ut_lineup_title_lineups_not_found" >No TV lineups found</string>
<!-- Description for lineup selection menu when no TV lineups is found -->
<string name="ut_lineup_description_lineups_not_found" >Please make sure your device is connected to the internet and the zip code / postal code is correct.</string>
<!-- Title for lineup selection menu when fetching lineups -->
<string name="ut_lineup_title_fetching_lineups">Fetching TV lineups…</string>
<!-- Description for lineup selection menu when fetching lineups -->
<string name="ut_lineup_description_fetching_lineups">This may take a few minutes. Please wait…</string>
<!-- Description for a button when no channels match -->
<string name="ut_lineup_no_channels_matched">No channels match</string>
<!-- Number of matched channels for lineup selection menu when lineups were found -->
<plurals name="ut_lineup_channels_matched">
<item quantity="one"><xliff:g id="channels_matched_one">%1$d</xliff:g> channel matches</item>
<item quantity="other"><xliff:g id="channels_matched_other">%1$d</xliff:g> channels match</item>
</plurals>
<!-- A button to select a specific TV lineup of channels for the channels received by a "Television Antenna" -->
<string name="ut_lineup_name_antenna">Antenna</string>
<!-- Title for channel scanning result menu when channels were found -->
<plurals name="ut_result_found_title">
<item quantity="one">%1$d channel found</item>
<item quantity="other">%1$d channels found</item>
</plurals>
<!-- Channel description for channel scanning result menu when channels were found "scan again" should match the button in string ut_result_found_choices-->
<string name="ut_result_found_description">If that seems incorrect, try adjusting your antenna and scan again.</string>
<!-- Rescan description for channel scanning result menu when channels were found -->
<!-- Menu items for channel scanning result menu when channels were found -->
<string-array name="ut_result_found_choices">
<item>Done</item>
<item>Scan again</item>
</string-array>
<!-- Title for channel scanning result menu when no channel was found -->
<string name="ut_result_not_found_title">No Channels found</string>
<!-- Description for channel scanning result menu when no channel was found -->
<string name="bt_result_not_found_description">The scan did not find any channels. Verify
your TV is connected to a TV signal source.\n\nIf using an over-the-air antenna, adjust
its placement or direction. For best results, place it high and near a window and scan
again.</string>
<!-- Description for channel scanning result menu when no channel was found with USB tuners-->
<string name="ut_result_not_found_description">The scan did not find any channels. Verify the
USB tuner is plugged in and connected to a TV signal source.\n\nIf using an over-the-air
antenna, adjust its placement or direction. For best results, place it high and near a
window and scan again.</string>
<!-- Description for channel scanning result menu when no channel was found with network
tuners -->
<string name="nt_result_not_found_description">The scan did not find any channels. Verify the
network tuner is powered on and connected to a TV signal source.\n\nIf using an over-the-air
antenna, adjust its placement or direction. For best results, place it high and near a
window and scan again.</string>
<!-- Menu items for channel scanning result menu when no channel was found -->
<string-array name="ut_result_not_found_choices">
<item>Scan again</item>
<item>Done</item>
</string-array>
<!-- Notification of USB channel tuner setup strings. -->
<!-- Name of notification channel which is for tuner setup. "USB Tuner" is a TV Tuner that is connected via a USB connection.-->
<string name="ut_setup_notification_channel_name" >USB Tuner setup</string>
<!-- Content title of the notification to launch the setup application of
USB tuner TV input for scanning channels. -->
<string name="ut_setup_notification_content_title">Scan for TV channels</string>
<!-- Content text and info of the notification to launch the setup application of
built-in tuner TV input for scanning channels. -->
<string name="bt_setup_notification_content_text">TV Tuner setup</string>
<!-- Content text and info of the notification to launch the setup application of
USB tuner TV input for scanning channels. -->
<string name="ut_setup_notification_content_text">USB TV Tuner setup</string>
<!-- Content text and info of the notification to launch the setup application of
network tuner TV input for scanning channels. -->
<string name="nt_setup_notification_content_text">Network TV Tuner setup</string>
<!-- Message when USB tuner device is unplugged or disconnected. [CHAR LIMIT=NONE] -->
<string name="msg_usb_tuner_disconnected">USB TV tuner disconnected.</string>
<!-- Message when Network tuner device is unplugged or disconnected. [CHAR LIMIT=NONE] -->
<string name="msg_network_tuner_disconnected">Network tuner disconnected.</string>
<!-- Title of postal/zip code input guided step fragment [CHAR LIMIT=30] -->
<string name="postal_code_guidance_title">Enter your ZIP Code.</string>
<!-- Description of postal/zip code input guided step fragment [CHAR LIMIT=NONE] -->
<string name="postal_code_guidance_description">Live TV app will use the ZIP Code to provide a complete program guide for the TV channels.</string>
<!-- Description of postal/zip code input edit text view to prompt users entering ZIP Code [CHAR LIMIT=30] -->
<string name="postal_code_action_description">Enter your ZIP Code</string>
<!-- Warning message shown in description field of postal/zip code input edit text view when user enters an invalid ZIP Code and presses Done [CHAR LIMIT=30] -->
<string name="postal_code_invalid_warning">Invalid ZIP Code</string>
</resources>