/** @file
Partition driver that produces logical BlockIo devices from a physical
BlockIo device. The logical BlockIo devices are based on the format
of the raw block devices media. Currently "El Torito CD-ROM", Legacy
MBR, and GPT partition schemes are supported.
Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "Partition.h"
//
// Partition Driver Global Variables.
//
EFI_DRIVER_BINDING_PROTOCOL gPartitionDriverBinding = {
PartitionDriverBindingSupported,
PartitionDriverBindingStart,
PartitionDriverBindingStop,
//
// Grub4Dos copies the BPB of the first partition to the MBR. If the
// DriverBindingStart() of the Fat driver gets run before that of Partition
// driver only the first partition can be recognized.
// Let the driver binding version of Partition driver be higher than that of
// Fat driver to make sure the DriverBindingStart() of the Partition driver
// gets run before that of Fat driver so that all the partitions can be recognized.
//
0xb,
NULL,
NULL
};
//
// Prioritized function list to detect partition table.
//
PARTITION_DETECT_ROUTINE mPartitionDetectRoutineTable[] = {
PartitionInstallGptChildHandles,
PartitionInstallElToritoChildHandles,
PartitionInstallMbrChildHandles,
NULL
};
/**
Test to see if this driver supports ControllerHandle. Any ControllerHandle
than contains a BlockIo and DiskIo protocol or a BlockIo2 protocol can be
supported.
@param[in] This Protocol instance pointer.
@param[in] ControllerHandle Handle of device to test.
@param[in] RemainingDevicePath Optional parameter use to pick a specific child
device to start.
@retval EFI_SUCCESS This driver supports this device
@retval EFI_ALREADY_STARTED This driver is already running on this device
@retval other This driver does not support this device
**/
EFI_STATUS
EFIAPI
PartitionDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE ControllerHandle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
EFI_DISK_IO_PROTOCOL *DiskIo;
EFI_DEV_PATH *Node;
//
// Check RemainingDevicePath validation
//
if (RemainingDevicePath != NULL) {
//
// Check if RemainingDevicePath is the End of Device Path Node,
// if yes, go on checking other conditions
//
if (!IsDevicePathEnd (RemainingDevicePath)) {
//
// If RemainingDevicePath isn't the End of Device Path Node,
// check its validation
//
Node = (EFI_DEV_PATH *) RemainingDevicePath;
if (Node->DevPath.Type != MEDIA_DEVICE_PATH ||
Node->DevPath.SubType != MEDIA_HARDDRIVE_DP ||
DevicePathNodeLength (&Node->DevPath) != sizeof (HARDDRIVE_DEVICE_PATH)) {
return EFI_UNSUPPORTED;
}
}
}
//
// Open the IO Abstraction(s) needed to perform the supported test
//
Status = gBS->OpenProtocol (
ControllerHandle,
&gEfiDiskIoProtocolGuid,
(VOID **) &DiskIo,
This->DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (Status == EFI_ALREADY_STARTED) {
return EFI_SUCCESS;
}
if (EFI_ERROR (Status)) {
return Status;
}
//
// Close the I/O Abstraction(s) used to perform the supported test
//
gBS->CloseProtocol (
ControllerHandle,
&gEfiDiskIoProtocolGuid,
This->DriverBindingHandle,
ControllerHandle
);
//
// Open the EFI Device Path protocol needed to perform the supported test
//
Status = gBS->OpenProtocol (
ControllerHandle,
&gEfiDevicePathProtocolGuid,
(VOID **) &ParentDevicePath,
This->DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (Status == EFI_ALREADY_STARTED) {
return EFI_SUCCESS;
}
if (EFI_ERROR (Status)) {
return Status;
}
//
// Close protocol, don't use device path protocol in the Support() function
//
gBS->CloseProtocol (
ControllerHandle,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
ControllerHandle
);
//
// Open the IO Abstraction(s) needed to perform the supported test
//
Status = gBS->OpenProtocol (
ControllerHandle,
&gEfiBlockIoProtocolGuid,
NULL,
This->DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_TEST_PROTOCOL
);
return Status;
}
/**
Start this driver on ControllerHandle by opening a Block IO or a Block IO2
or both, and Disk IO protocol, reading Device Path, and creating a child
handle with a Disk IO and device path protocol.
@param[in] This Protocol instance pointer.
@param[in] ControllerHandle Handle of device to bind driver to
@param[in] RemainingDevicePath Optional parameter use to pick a specific child
device to start.
@retval EFI_SUCCESS This driver is added to ControllerHandle
@retval EFI_ALREADY_STARTED This driver is already running on ControllerHandle
@retval other This driver does not support this device
**/
EFI_STATUS
EFIAPI
PartitionDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE ControllerHandle,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EFI_STATUS OpenStatus;
EFI_BLOCK_IO_PROTOCOL *BlockIo;
EFI_BLOCK_IO2_PROTOCOL *BlockIo2;
EFI_DISK_IO_PROTOCOL *DiskIo;
EFI_DISK_IO2_PROTOCOL *DiskIo2;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
PARTITION_DETECT_ROUTINE *Routine;
BOOLEAN MediaPresent;
EFI_TPL OldTpl;
BlockIo2 = NULL;
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
//
// Check RemainingDevicePath validation
//
if (RemainingDevicePath != NULL) {
//
// Check if RemainingDevicePath is the End of Device Path Node,
// if yes, return EFI_SUCCESS
//
if (IsDevicePathEnd (RemainingDevicePath)) {
Status = EFI_SUCCESS;
goto Exit;
}
}
//
// Try to open BlockIO and BlockIO2. If BlockIO would be opened, continue,
// otherwise, return error.
//
Status = gBS->OpenProtocol (
ControllerHandle,
&gEfiBlockIoProtocolGuid,
(VOID **) &BlockIo,
This->DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
goto Exit;
}
Status = gBS->OpenProtocol (
ControllerHandle,
&gEfiBlockIo2ProtocolGuid,
(VOID **) &BlockIo2,
This->DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
BlockIo2 = NULL;
}
//
// Get the Device Path Protocol on ControllerHandle's handle.
//
Status = gBS->OpenProtocol (
ControllerHandle,
&gEfiDevicePathProtocolGuid,
(VOID **) &ParentDevicePath,
This->DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
goto Exit;
}
//
// Get the DiskIo and DiskIo2.
//
Status = gBS->OpenProtocol (
ControllerHandle,
&gEfiDiskIoProtocolGuid,
(VOID **) &DiskIo,
This->DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
gBS->CloseProtocol (
ControllerHandle,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
ControllerHandle
);
goto Exit;
}
OpenStatus = Status;
Status = gBS->OpenProtocol (
ControllerHandle,
&gEfiDiskIo2ProtocolGuid,
(VOID **) &DiskIo2,
This->DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
DiskIo2 = NULL;
}
//
// Try to read blocks when there's media or it is removable physical partition.
//
Status = EFI_UNSUPPORTED;
MediaPresent = BlockIo->Media->MediaPresent;
if (BlockIo->Media->MediaPresent ||
(BlockIo->Media->RemovableMedia && !BlockIo->Media->LogicalPartition)) {
//
// Try for GPT, then El Torito, and then legacy MBR partition types. If the
// media supports a given partition type install child handles to represent
// the partitions described by the media.
//
Routine = &mPartitionDetectRoutineTable[0];
while (*Routine != NULL) {
Status = (*Routine) (
This,
ControllerHandle,
DiskIo,
DiskIo2,
BlockIo,
BlockIo2,
ParentDevicePath
);
if (!EFI_ERROR (Status) || Status == EFI_MEDIA_CHANGED || Status == EFI_NO_MEDIA) {
break;
}
Routine++;
}
}
//
// In the case that the driver is already started (OpenStatus == EFI_ALREADY_STARTED),
// the DevicePathProtocol and the DiskIoProtocol are not actually opened by the
// driver. So don't try to close them. Otherwise, we will break the dependency
// between the controller and the driver set up before.
//
// In the case that when the media changes on a device it will Reinstall the
// BlockIo interaface. This will cause a call to our Stop(), and a subsequent
// reentrant call to our Start() successfully. We should leave the device open
// when this happen. The "media change" case includes either the status is
// EFI_MEDIA_CHANGED or it is a "media" to "no media" change.
//
if (EFI_ERROR (Status) &&
!EFI_ERROR (OpenStatus) &&
Status != EFI_MEDIA_CHANGED &&
!(MediaPresent && Status == EFI_NO_MEDIA)) {
gBS->CloseProtocol (
ControllerHandle,
&gEfiDiskIoProtocolGuid,
This->DriverBindingHandle,
ControllerHandle
);
//
// Close Parent DiskIo2 if has.
//
gBS->CloseProtocol (
ControllerHandle,
&gEfiDiskIo2ProtocolGuid,
This->DriverBindingHandle,
ControllerHandle
);
gBS->CloseProtocol (
ControllerHandle,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
ControllerHandle
);
}
Exit:
gBS->RestoreTPL (OldTpl);
return Status;
}
/**
Stop this driver on ControllerHandle. Support stopping any child handles
created by this driver.
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to stop driver on
@param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
children is zero stop the entire bus driver.
@param ChildHandleBuffer List of Child Handles to Stop.
@retval EFI_SUCCESS This driver is removed ControllerHandle
@retval other This driver was not removed from this device
**/
EFI_STATUS
EFIAPI
PartitionDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE ControllerHandle,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
)
{
EFI_STATUS Status;
UINTN Index;
EFI_BLOCK_IO_PROTOCOL *BlockIo;
EFI_BLOCK_IO2_PROTOCOL *BlockIo2;
BOOLEAN AllChildrenStopped;
PARTITION_PRIVATE_DATA *Private;
EFI_DISK_IO_PROTOCOL *DiskIo;
BlockIo = NULL;
BlockIo2 = NULL;
Private = NULL;
if (NumberOfChildren == 0) {
//
// In the case of re-entry of the PartitionDriverBindingStop, the
// NumberOfChildren may not reflect the actual number of children on the
// bus driver. Hence, additional check is needed here.
//
if (HasChildren (ControllerHandle)) {
DEBUG((EFI_D_ERROR, "PartitionDriverBindingStop: Still has child.\n"));
return EFI_DEVICE_ERROR;
}
//
// Close the bus driver
//
gBS->CloseProtocol (
ControllerHandle,
&gEfiDiskIoProtocolGuid,
This->DriverBindingHandle,
ControllerHandle
);
//
// Close Parent BlockIO2 if has.
//
gBS->CloseProtocol (
ControllerHandle,
&gEfiDiskIo2ProtocolGuid,
This->DriverBindingHandle,
ControllerHandle
);
gBS->CloseProtocol (
ControllerHandle,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
ControllerHandle
);
return EFI_SUCCESS;
}
AllChildrenStopped = TRUE;
for (Index = 0; Index < NumberOfChildren; Index++) {
gBS->OpenProtocol (
ChildHandleBuffer[Index],
&gEfiBlockIoProtocolGuid,
(VOID **) &BlockIo,
This->DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
//
// Try to locate BlockIo2.
//
gBS->OpenProtocol (
ChildHandleBuffer[Index],
&gEfiBlockIo2ProtocolGuid,
(VOID **) &BlockIo2,
This->DriverBindingHandle,
ControllerHandle,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
Private = PARTITION_DEVICE_FROM_BLOCK_IO_THIS (BlockIo);
if (Private->InStop) {
//
// If the child handle is going to be stopped again during the re-entry
// of DriverBindingStop, just do nothing.
//
break;
}
Private->InStop = TRUE;
BlockIo->FlushBlocks (BlockIo);
if (BlockIo2 != NULL) {
Status = BlockIo2->FlushBlocksEx (BlockIo2, NULL);
DEBUG((EFI_D_ERROR, "PartitionDriverBindingStop: FlushBlocksEx returned with %r\n", Status));
} else {
Status = EFI_SUCCESS;
}
gBS->CloseProtocol (
ControllerHandle,
&gEfiDiskIoProtocolGuid,
This->DriverBindingHandle,
ChildHandleBuffer[Index]
);
//
// All Software protocols have be freed from the handle so remove it.
// Remove the BlockIo Protocol if has.
// Remove the BlockIo2 Protocol if has.
//
if (BlockIo2 != NULL) {
//
// Some device drivers might re-install the BlockIO(2) protocols for a
// media change condition. Therefore, if the FlushBlocksEx returned with
// EFI_MEDIA_CHANGED, just let the BindingStop fail to avoid potential
// reference of already stopped child handle.
//
if (Status != EFI_MEDIA_CHANGED) {
Status = gBS->UninstallMultipleProtocolInterfaces (
ChildHandleBuffer[Index],
&gEfiDevicePathProtocolGuid,
Private->DevicePath,
&gEfiBlockIoProtocolGuid,
&Private->BlockIo,
&gEfiBlockIo2ProtocolGuid,
&Private->BlockIo2,
Private->EspGuid,
NULL,
NULL
);
}
} else {
Status = gBS->UninstallMultipleProtocolInterfaces (
ChildHandleBuffer[Index],
&gEfiDevicePathProtocolGuid,
Private->DevicePath,
&gEfiBlockIoProtocolGuid,
&Private->BlockIo,
Private->EspGuid,
NULL,
NULL
);
}
if (EFI_ERROR (Status)) {
Private->InStop = FALSE;
gBS->OpenProtocol (
ControllerHandle,
&gEfiDiskIoProtocolGuid,
(VOID **) &DiskIo,
This->DriverBindingHandle,
ChildHandleBuffer[Index],
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
} else {
FreePool (Private->DevicePath);
FreePool (Private);
}
if (EFI_ERROR (Status)) {
AllChildrenStopped = FALSE;
if (Status == EFI_MEDIA_CHANGED) {
break;
}
}
}
if (!AllChildrenStopped) {
return EFI_DEVICE_ERROR;
}
return EFI_SUCCESS;
}
/**
Reset the Block Device.
@param This Protocol instance pointer.
@param ExtendedVerification Driver may perform diagnostics on reset.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning properly and could
not be reset.
**/
EFI_STATUS
EFIAPI
PartitionReset (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN BOOLEAN ExtendedVerification
)
{
PARTITION_PRIVATE_DATA *Private;
Private = PARTITION_DEVICE_FROM_BLOCK_IO_THIS (This);
return Private->ParentBlockIo->Reset (
Private->ParentBlockIo,
ExtendedVerification
);
}
/**
Probe the media status and return EFI_NO_MEDIA or EFI_MEDIA_CHANGED
for no media or media change case. Otherwise DefaultStatus is returned.
@param DiskIo Pointer to the DiskIo instance.
@param MediaId Id of the media, changes every time the media is replaced.
@param DefaultStatus The default status to return when it's not the no media
or media change case.
@retval EFI_NO_MEDIA There is no media.
@retval EFI_MEDIA_CHANGED The media was changed.
@retval others The default status to return.
**/
EFI_STATUS
ProbeMediaStatus (
IN EFI_DISK_IO_PROTOCOL *DiskIo,
IN UINT32 MediaId,
IN EFI_STATUS DefaultStatus
)
{
EFI_STATUS Status;
UINT8 Buffer[1];
//
// Read 1 byte from offset 0 to check if the MediaId is still valid.
// The reading operation is synchronious thus it is not worth it to
// allocate a buffer from the pool. The destination buffer for the
// data is in the stack.
//
Status = DiskIo->ReadDisk (DiskIo, MediaId, 0, 1, (VOID*)Buffer);
if ((Status == EFI_NO_MEDIA) || (Status == EFI_MEDIA_CHANGED)) {
return Status;
}
return DefaultStatus;
}
/**
Read by using the Disk IO protocol on the parent device. Lba addresses
must be converted to byte offsets.
@param This Protocol instance pointer.
@param MediaId Id of the media, changes every time the media is replaced.
@param Lba The starting Logical Block Address to read from
@param BufferSize Size of Buffer, must be a multiple of device block size.
@param Buffer Buffer containing read data
@retval EFI_SUCCESS The data was read correctly from the device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the read.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains device addresses that are not
valid for the device.
**/
EFI_STATUS
EFIAPI
PartitionReadBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
OUT VOID *Buffer
)
{
PARTITION_PRIVATE_DATA *Private;
UINT64 Offset;
Private = PARTITION_DEVICE_FROM_BLOCK_IO_THIS (This);
if (BufferSize % Private->BlockSize != 0) {
return ProbeMediaStatus (Private->DiskIo, MediaId, EFI_BAD_BUFFER_SIZE);
}
Offset = MultU64x32 (Lba, Private->BlockSize) + Private->Start;
if (Offset + BufferSize > Private->End) {
return ProbeMediaStatus (Private->DiskIo, MediaId, EFI_INVALID_PARAMETER);
}
//
// Because some kinds of partition have different block size from their parent
// device, we call the Disk IO protocol on the parent device, not the Block IO
// protocol
//
return Private->DiskIo->ReadDisk (Private->DiskIo, MediaId, Offset, BufferSize, Buffer);
}
/**
Write by using the Disk IO protocol on the parent device. Lba addresses
must be converted to byte offsets.
@param[in] This Protocol instance pointer.
@param[in] MediaId Id of the media, changes every time the media is replaced.
@param[in] Lba The starting Logical Block Address to read from
@param[in] BufferSize Size of Buffer, must be a multiple of device block size.
@param[in] Buffer Buffer containing data to be written to device.
@retval EFI_SUCCESS The data was written correctly to the device.
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains a LBA that is not
valid for the device.
**/
EFI_STATUS
EFIAPI
PartitionWriteBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN UINTN BufferSize,
IN VOID *Buffer
)
{
PARTITION_PRIVATE_DATA *Private;
UINT64 Offset;
Private = PARTITION_DEVICE_FROM_BLOCK_IO_THIS (This);
if (BufferSize % Private->BlockSize != 0) {
return ProbeMediaStatus (Private->DiskIo, MediaId, EFI_BAD_BUFFER_SIZE);
}
Offset = MultU64x32 (Lba, Private->BlockSize) + Private->Start;
if (Offset + BufferSize > Private->End) {
return ProbeMediaStatus (Private->DiskIo, MediaId, EFI_INVALID_PARAMETER);
}
//
// Because some kinds of partition have different block size from their parent
// device, we call the Disk IO protocol on the parent device, not the Block IO
// protocol
//
return Private->DiskIo->WriteDisk (Private->DiskIo, MediaId, Offset, BufferSize, Buffer);
}
/**
Flush the parent Block Device.
@param This Protocol instance pointer.
@retval EFI_SUCCESS All outstanding data was written to the device
@retval EFI_DEVICE_ERROR The device reported an error while writting back the data
@retval EFI_NO_MEDIA There is no media in the device.
**/
EFI_STATUS
EFIAPI
PartitionFlushBlocks (
IN EFI_BLOCK_IO_PROTOCOL *This
)
{
PARTITION_PRIVATE_DATA *Private;
Private = PARTITION_DEVICE_FROM_BLOCK_IO_THIS (This);
return Private->ParentBlockIo->FlushBlocks (Private->ParentBlockIo);
}
/**
Probe the media status and return EFI_NO_MEDIA or EFI_MEDIA_CHANGED
for no media or media change case. Otherwise DefaultStatus is returned.
@param DiskIo2 Pointer to the DiskIo2 instance.
@param MediaId Id of the media, changes every time the media is replaced.
@param DefaultStatus The default status to return when it's not the no media
or media change case.
@retval EFI_NO_MEDIA There is no media.
@retval EFI_MEDIA_CHANGED The media was changed.
@retval others The default status to return.
**/
EFI_STATUS
ProbeMediaStatusEx (
IN EFI_DISK_IO2_PROTOCOL *DiskIo2,
IN UINT32 MediaId,
IN EFI_STATUS DefaultStatus
)
{
EFI_STATUS Status;
//
// Read 1 byte from offset 0 but passing NULL as buffer pointer
//
Status = DiskIo2->ReadDiskEx (DiskIo2, MediaId, 0, NULL, 1, NULL);
if ((Status == EFI_NO_MEDIA) || (Status == EFI_MEDIA_CHANGED)) {
return Status;
}
return DefaultStatus;
}
/**
Reset the Block Device throught Block I/O2 protocol.
@param This Protocol instance pointer.
@param ExtendedVerification Driver may perform diagnostics on reset.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning properly and could
not be reset.
**/
EFI_STATUS
EFIAPI
PartitionResetEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN BOOLEAN ExtendedVerification
)
{
PARTITION_PRIVATE_DATA *Private;
Private = PARTITION_DEVICE_FROM_BLOCK_IO2_THIS (This);
return Private->ParentBlockIo2->Reset (
Private->ParentBlockIo2,
ExtendedVerification
);
}
/**
The general callback for the DiskIo2 interfaces.
@param Event Event whose notification function is being invoked.
@param Context The pointer to the notification function's context,
which points to the PARTITION_ACCESS_TASK instance.
**/
VOID
EFIAPI
PartitionOnAccessComplete (
IN EFI_EVENT Event,
IN VOID *Context
)
{
PARTITION_ACCESS_TASK *Task;
Task = (PARTITION_ACCESS_TASK *) Context;
gBS->CloseEvent (Event);
Task->BlockIo2Token->TransactionStatus = Task->DiskIo2Token.TransactionStatus;
gBS->SignalEvent (Task->BlockIo2Token->Event);
FreePool (Task);
}
/**
Create a new PARTITION_ACCESS_TASK instance.
@param Token Pointer to the EFI_BLOCK_IO2_TOKEN.
@return Pointer to the created PARTITION_ACCESS_TASK instance or NULL upon failure.
**/
PARTITION_ACCESS_TASK *
PartitionCreateAccessTask (
IN EFI_BLOCK_IO2_TOKEN *Token
)
{
EFI_STATUS Status;
PARTITION_ACCESS_TASK *Task;
Task = AllocatePool (sizeof (*Task));
if (Task == NULL) {
return NULL;
}
Status = gBS->CreateEvent (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
PartitionOnAccessComplete,
Task,
&Task->DiskIo2Token.Event
);
if (EFI_ERROR (Status)) {
FreePool (Task);
return NULL;
}
Task->BlockIo2Token = Token;
return Task;
}
/**
Read BufferSize bytes from Lba into Buffer.
This function reads the requested number of blocks from the device. All the
blocks are read, or an error is returned.
If EFI_DEVICE_ERROR, EFI_NO_MEDIA,_or EFI_MEDIA_CHANGED is returned and
non-blocking I/O is being used, the Event associated with this request will
not be signaled.
@param[in] This Indicates a pointer to the calling context.
@param[in] MediaId Id of the media, changes every time the media is
replaced.
@param[in] Lba The starting Logical Block Address to read from.
@param[in, out] Token A pointer to the token associated with the transaction.
@param[in] BufferSize Size of Buffer, must be a multiple of device block size.
@param[out] Buffer A pointer to the destination buffer for the data. The
caller is responsible for either having implicit or
explicit ownership of the buffer.
@retval EFI_SUCCESS The read request was queued if Token->Event is
not NULL.The data was read correctly from the
device if the Token->Event is NULL.
@retval EFI_DEVICE_ERROR The device reported an error while performing
the read.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
@retval EFI_BAD_BUFFER_SIZE The BufferSize parameter is not a multiple of the
intrinsic block size of the device.
@retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack
of resources.
**/
EFI_STATUS
EFIAPI
PartitionReadBlocksEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN OUT EFI_BLOCK_IO2_TOKEN *Token,
IN UINTN BufferSize,
OUT VOID *Buffer
)
{
EFI_STATUS Status;
PARTITION_PRIVATE_DATA *Private;
UINT64 Offset;
PARTITION_ACCESS_TASK *Task;
Private = PARTITION_DEVICE_FROM_BLOCK_IO2_THIS (This);
if (BufferSize % Private->BlockSize != 0) {
return ProbeMediaStatusEx (Private->DiskIo2, MediaId, EFI_BAD_BUFFER_SIZE);
}
Offset = MultU64x32 (Lba, Private->BlockSize) + Private->Start;
if (Offset + BufferSize > Private->End) {
return ProbeMediaStatusEx (Private->DiskIo2, MediaId, EFI_INVALID_PARAMETER);
}
if ((Token != NULL) && (Token->Event != NULL)) {
Task = PartitionCreateAccessTask (Token);
if (Task == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Status = Private->DiskIo2->ReadDiskEx (Private->DiskIo2, MediaId, Offset, &Task->DiskIo2Token, BufferSize, Buffer);
if (EFI_ERROR (Status)) {
gBS->CloseEvent (Task->DiskIo2Token.Event);
FreePool (Task);
}
} else {
Status = Private->DiskIo2->ReadDiskEx (Private->DiskIo2, MediaId, Offset, NULL, BufferSize, Buffer);
}
return Status;
}
/**
Write BufferSize bytes from Lba into Buffer.
This function writes the requested number of blocks to the device. All blocks
are written, or an error is returned.If EFI_DEVICE_ERROR, EFI_NO_MEDIA,
EFI_WRITE_PROTECTED or EFI_MEDIA_CHANGED is returned and non-blocking I/O is
being used, the Event associated with this request will not be signaled.
@param[in] This Indicates a pointer to the calling context.
@param[in] MediaId The media ID that the write request is for.
@param[in] Lba The starting logical block address to be written. The
caller is responsible for writing to only legitimate
locations.
@param[in, out] Token A pointer to the token associated with the transaction.
@param[in] BufferSize Size of Buffer, must be a multiple of device block size.
@param[in] Buffer A pointer to the source buffer for the data.
@retval EFI_SUCCESS The write request was queued if Event is not NULL.
The data was written correctly to the device if
the Event is NULL.
@retval EFI_WRITE_PROTECTED The device can not be written to.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.
@retval EFI_DEVICE_ERROR The device reported an error while performing the write.
@retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.
@retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,
or the buffer is not on proper alignment.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack
of resources.
**/
EFI_STATUS
EFIAPI
PartitionWriteBlocksEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN UINT32 MediaId,
IN EFI_LBA Lba,
IN OUT EFI_BLOCK_IO2_TOKEN *Token,
IN UINTN BufferSize,
IN VOID *Buffer
)
{
EFI_STATUS Status;
PARTITION_PRIVATE_DATA *Private;
UINT64 Offset;
PARTITION_ACCESS_TASK *Task;
Private = PARTITION_DEVICE_FROM_BLOCK_IO2_THIS (This);
if (BufferSize % Private->BlockSize != 0) {
return ProbeMediaStatusEx (Private->DiskIo2, MediaId, EFI_BAD_BUFFER_SIZE);
}
Offset = MultU64x32 (Lba, Private->BlockSize) + Private->Start;
if (Offset + BufferSize > Private->End) {
return ProbeMediaStatusEx (Private->DiskIo2, MediaId, EFI_INVALID_PARAMETER);
}
if ((Token != NULL) && (Token->Event != NULL)) {
Task = PartitionCreateAccessTask (Token);
if (Task == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Status = Private->DiskIo2->WriteDiskEx (Private->DiskIo2, MediaId, Offset, &Task->DiskIo2Token, BufferSize, Buffer);
if (EFI_ERROR (Status)) {
gBS->CloseEvent (Task->DiskIo2Token.Event);
FreePool (Task);
}
} else {
Status = Private->DiskIo2->WriteDiskEx (Private->DiskIo2, MediaId, Offset, NULL, BufferSize, Buffer);
}
return Status;
}
/**
Flush the Block Device.
If EFI_DEVICE_ERROR, EFI_NO_MEDIA,_EFI_WRITE_PROTECTED or EFI_MEDIA_CHANGED
is returned and non-blocking I/O is being used, the Event associated with
this request will not be signaled.
@param[in] This Indicates a pointer to the calling context.
@param[in, out] Token A pointer to the token associated with the transaction
@retval EFI_SUCCESS The flush request was queued if Event is not NULL.
All outstanding data was written correctly to the
device if the Event is NULL.
@retval EFI_DEVICE_ERROR The device reported an error while writting back
the data.
@retval EFI_WRITE_PROTECTED The device cannot be written to.
@retval EFI_NO_MEDIA There is no media in the device.
@retval EFI_MEDIA_CHANGED The MediaId is not for the current media.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack
of resources.
**/
EFI_STATUS
EFIAPI
PartitionFlushBlocksEx (
IN EFI_BLOCK_IO2_PROTOCOL *This,
IN OUT EFI_BLOCK_IO2_TOKEN *Token
)
{
EFI_STATUS Status;
PARTITION_PRIVATE_DATA *Private;
PARTITION_ACCESS_TASK *Task;
Private = PARTITION_DEVICE_FROM_BLOCK_IO2_THIS (This);
if ((Token != NULL) && (Token->Event != NULL)) {
Task = PartitionCreateAccessTask (Token);
if (Task == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Status = Private->DiskIo2->FlushDiskEx (Private->DiskIo2, &Task->DiskIo2Token);
if (EFI_ERROR (Status)) {
gBS->CloseEvent (Task->DiskIo2Token.Event);
FreePool (Task);
}
} else {
Status = Private->DiskIo2->FlushDiskEx (Private->DiskIo2, NULL);
}
return Status;
}
/**
Create a child handle for a logical block device that represents the
bytes Start to End of the Parent Block IO device.
@param[in] This Protocol instance pointer.
@param[in] ParentHandle Parent Handle for new child.
@param[in] ParentDiskIo Parent DiskIo interface.
@param[in] ParentDiskIo2 Parent DiskIo2 interface.
@param[in] ParentBlockIo Parent BlockIo interface.
@param[in] ParentBlockIo2 Parent BlockIo2 interface.
@param[in] ParentDevicePath Parent Device Path.
@param[in] DevicePathNode Child Device Path node.
@param[in] Start Start Block.
@param[in] End End Block.
@param[in] BlockSize Child block size.
@param[in] InstallEspGuid Flag to install EFI System Partition GUID on handle.
@retval EFI_SUCCESS A child handle was added.
@retval other A child handle was not added.
**/
EFI_STATUS
PartitionInstallChildHandle (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE ParentHandle,
IN EFI_DISK_IO_PROTOCOL *ParentDiskIo,
IN EFI_DISK_IO2_PROTOCOL *ParentDiskIo2,
IN EFI_BLOCK_IO_PROTOCOL *ParentBlockIo,
IN EFI_BLOCK_IO2_PROTOCOL *ParentBlockIo2,
IN EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath,
IN EFI_DEVICE_PATH_PROTOCOL *DevicePathNode,
IN EFI_LBA Start,
IN EFI_LBA End,
IN UINT32 BlockSize,
IN BOOLEAN InstallEspGuid
)
{
EFI_STATUS Status;
PARTITION_PRIVATE_DATA *Private;
Status = EFI_SUCCESS;
Private = AllocateZeroPool (sizeof (PARTITION_PRIVATE_DATA));
if (Private == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Private->Signature = PARTITION_PRIVATE_DATA_SIGNATURE;
Private->Start = MultU64x32 (Start, ParentBlockIo->Media->BlockSize);
Private->End = MultU64x32 (End + 1, ParentBlockIo->Media->BlockSize);
Private->BlockSize = BlockSize;
Private->ParentBlockIo = ParentBlockIo;
Private->ParentBlockIo2 = ParentBlockIo2;
Private->DiskIo = ParentDiskIo;
Private->DiskIo2 = ParentDiskIo2;
//
// Set the BlockIO into Private Data.
//
Private->BlockIo.Revision = ParentBlockIo->Revision;
Private->BlockIo.Media = &Private->Media;
CopyMem (Private->BlockIo.Media, ParentBlockIo->Media, sizeof (EFI_BLOCK_IO_MEDIA));
Private->BlockIo.Reset = PartitionReset;
Private->BlockIo.ReadBlocks = PartitionReadBlocks;
Private->BlockIo.WriteBlocks = PartitionWriteBlocks;
Private->BlockIo.FlushBlocks = PartitionFlushBlocks;
//
// Set the BlockIO2 into Private Data.
//
if (Private->DiskIo2 != NULL) {
ASSERT (Private->ParentBlockIo2 != NULL);
Private->BlockIo2.Media = &Private->Media2;
CopyMem (Private->BlockIo2.Media, ParentBlockIo2->Media, sizeof (EFI_BLOCK_IO_MEDIA));
Private->BlockIo2.Reset = PartitionResetEx;
Private->BlockIo2.ReadBlocksEx = PartitionReadBlocksEx;
Private->BlockIo2.WriteBlocksEx = PartitionWriteBlocksEx;
Private->BlockIo2.FlushBlocksEx = PartitionFlushBlocksEx;
}
Private->Media.IoAlign = 0;
Private->Media.LogicalPartition = TRUE;
Private->Media.LastBlock = DivU64x32 (
MultU64x32 (
End - Start + 1,
ParentBlockIo->Media->BlockSize
),
BlockSize
) - 1;
Private->Media.BlockSize = (UINT32) BlockSize;
Private->Media2.IoAlign = 0;
Private->Media2.LogicalPartition = TRUE;
Private->Media2.LastBlock = Private->Media.LastBlock;
Private->Media2.BlockSize = (UINT32) BlockSize;
//
// Per UEFI Spec, LowestAlignedLba, LogicalBlocksPerPhysicalBlock and OptimalTransferLengthGranularity must be 0
// for logical partitions.
//
if (Private->BlockIo.Revision >= EFI_BLOCK_IO_PROTOCOL_REVISION2) {
Private->Media.LowestAlignedLba = 0;
Private->Media.LogicalBlocksPerPhysicalBlock = 0;
Private->Media2.LowestAlignedLba = 0;
Private->Media2.LogicalBlocksPerPhysicalBlock = 0;
if (Private->BlockIo.Revision >= EFI_BLOCK_IO_PROTOCOL_REVISION3) {
Private->Media.OptimalTransferLengthGranularity = 0;
Private->Media2.OptimalTransferLengthGranularity = 0;
}
}
Private->DevicePath = AppendDevicePathNode (ParentDevicePath, DevicePathNode);
if (Private->DevicePath == NULL) {
FreePool (Private);
return EFI_OUT_OF_RESOURCES;
}
if (InstallEspGuid) {
Private->EspGuid = &gEfiPartTypeSystemPartGuid;
} else {
//
// If NULL InstallMultipleProtocolInterfaces will ignore it.
//
Private->EspGuid = NULL;
}
//
// Create the new handle.
//
Private->Handle = NULL;
if (Private->DiskIo2 != NULL) {
Status = gBS->InstallMultipleProtocolInterfaces (
&Private->Handle,
&gEfiDevicePathProtocolGuid,
Private->DevicePath,
&gEfiBlockIoProtocolGuid,
&Private->BlockIo,
&gEfiBlockIo2ProtocolGuid,
&Private->BlockIo2,
Private->EspGuid,
NULL,
NULL
);
} else {
Status = gBS->InstallMultipleProtocolInterfaces (
&Private->Handle,
&gEfiDevicePathProtocolGuid,
Private->DevicePath,
&gEfiBlockIoProtocolGuid,
&Private->BlockIo,
Private->EspGuid,
NULL,
NULL
);
}
if (!EFI_ERROR (Status)) {
//
// Open the Parent Handle for the child
//
Status = gBS->OpenProtocol (
ParentHandle,
&gEfiDiskIoProtocolGuid,
(VOID **) &ParentDiskIo,
This->DriverBindingHandle,
Private->Handle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
} else {
FreePool (Private->DevicePath);
FreePool (Private);
}
return Status;
}
/**
The user Entry Point for module Partition. The user code starts with this function.
@param[in] ImageHandle The firmware allocated handle for the EFI image.
@param[in] SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The entry point is executed successfully.
@retval other Some error occurs when executing this entry point.
**/
EFI_STATUS
EFIAPI
InitializePartition (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
//
// Install driver model protocol(s).
//
Status = EfiLibInstallDriverBindingComponentName2 (
ImageHandle,
SystemTable,
&gPartitionDriverBinding,
ImageHandle,
&gPartitionComponentName,
&gPartitionComponentName2
);
ASSERT_EFI_ERROR (Status);
return Status;
}
/**
Test to see if there is any child on ControllerHandle.
@param[in] ControllerHandle Handle of device to test.
@retval TRUE There are children on the ControllerHandle.
@retval FALSE No child is on the ControllerHandle.
**/
BOOLEAN
HasChildren (
IN EFI_HANDLE ControllerHandle
)
{
EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer;
UINTN EntryCount;
EFI_STATUS Status;
UINTN Index;
Status = gBS->OpenProtocolInformation (
ControllerHandle,
&gEfiDiskIoProtocolGuid,
&OpenInfoBuffer,
&EntryCount
);
ASSERT_EFI_ERROR (Status);
for (Index = 0; Index < EntryCount; Index++) {
if ((OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) != 0) {
break;
}
}
FreePool (OpenInfoBuffer);
return (BOOLEAN) (Index < EntryCount);
}