/** @file
Helper functions for configuring or obtaining the parameters relating to IP6.
Copyright (c) 2010 - 2014, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "Ip6Impl.h"
CHAR16 mIp6ConfigStorageName[] = L"IP6_CONFIG_IFR_NVDATA";
/**
The notify function of create event when performing a manual configuration.
@param[in] Event The pointer of Event.
@param[in] Context The pointer of Context.
**/
VOID
EFIAPI
Ip6ConfigManualAddressNotify (
IN EFI_EVENT Event,
IN VOID *Context
)
{
*((BOOLEAN *) Context) = TRUE;
}
/**
Get the configuration data for the EFI IPv6 network stack running on the
communication. It is a help function to the call EfiIp6ConfigGetData().
@param[in] Ip6Config The pointer to the EFI_IP6_CONFIG_PROTOCOL instance.
@param[in] DataType The type of data to get.
@param[out] DataSize The size of buffer required in bytes.
@param[out] Data The data buffer in which the configuration data is returned. The
type of the data buffer associated with the DataType.
It is the caller's responsibility to free the resource.
@retval EFI_SUCCESS The specified configuration data was obtained successfully.
@retval EFI_INVALID_PARAMETER One or more of the followings are TRUE:
- Ip6Config is NULL or invalid.
- DataSize is NULL.
- Data is NULL.
@retval EFI_OUT_OF_RESOURCES Fail to perform the operation due to lack of resources.
@retval EFI_NOT_READY The specified configuration data is not ready due to an
asynchronous configuration process already in progress.
@retval EFI_NOT_FOUND The specified configuration data was not found.
**/
EFI_STATUS
Ip6ConfigNvGetData (
IN EFI_IP6_CONFIG_PROTOCOL *Ip6Config,
IN EFI_IP6_CONFIG_DATA_TYPE DataType,
OUT UINTN *DataSize,
OUT VOID **Data
)
{
UINTN BufferSize;
VOID *Buffer;
EFI_STATUS Status;
if ((Ip6Config == NULL) || (Data == NULL) || (DataSize == NULL)) {
return EFI_INVALID_PARAMETER;
}
BufferSize = 0;
Status = Ip6Config->GetData (
Ip6Config,
DataType,
&BufferSize,
NULL
);
if (Status != EFI_BUFFER_TOO_SMALL) {
return Status;
}
Buffer = AllocateZeroPool (BufferSize);
if (Buffer == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Status = Ip6Config->GetData (
Ip6Config,
DataType,
&BufferSize,
Buffer
);
if (EFI_ERROR (Status)) {
FreePool (Buffer);
return Status;
}
*DataSize = BufferSize;
*Data = Buffer;
return EFI_SUCCESS;
}
/**
Free all nodes in IP6_ADDRESS_INFO_ENTRY in the list array specified
with ListHead.
@param[in] ListHead The head of the list array in IP6_ADDRESS_INFO_ENTRY.
**/
VOID
Ip6FreeAddressInfoList (
IN LIST_ENTRY *ListHead
)
{
IP6_ADDRESS_INFO_ENTRY *Node;
LIST_ENTRY *Entry;
LIST_ENTRY *NextEntry;
NET_LIST_FOR_EACH_SAFE (Entry, NextEntry, ListHead) {
Node = NET_LIST_USER_STRUCT (Entry, IP6_ADDRESS_INFO_ENTRY, Link);
RemoveEntryList (&Node->Link);
FreePool (Node);
}
}
/**
Convert the IPv6 address into a formatted string.
@param[in] Ip6 The IPv6 address.
@param[out] Str The formatted IP string.
**/
VOID
Ip6ToStr (
IN EFI_IPv6_ADDRESS *Ip6,
OUT CHAR16 *Str
)
{
UINTN Index;
BOOLEAN Short;
UINTN Number;
CHAR16 FormatString[8];
Short = FALSE;
for (Index = 0; Index < 15; Index = Index + 2) {
if (!Short &&
Index % 2 == 0 &&
Ip6->Addr[Index] == 0 &&
Ip6->Addr[Index + 1] == 0
) {
//
// Deal with the case of ::.
//
if (Index == 0) {
*Str = L':';
*(Str + 1) = L':';
Str = Str + 2;
} else {
*Str = L':';
Str = Str + 1;
}
while ((Index < 15) && (Ip6->Addr[Index] == 0) && (Ip6->Addr[Index + 1] == 0)) {
Index = Index + 2;
}
Short = TRUE;
if (Index == 16) {
//
// :: is at the end of the address.
//
*Str = L'\0';
break;
}
}
ASSERT (Index < 15);
if (Ip6->Addr[Index] == 0) {
Number = UnicodeSPrint (Str, 2 * IP6_STR_MAX_SIZE, L"%x:", (UINTN) Ip6->Addr[Index + 1]);
} else {
if (Ip6->Addr[Index + 1] < 0x10) {
CopyMem (FormatString, L"%x0%x:", StrSize (L"%x0%x:"));
} else {
CopyMem (FormatString, L"%x%x:", StrSize (L"%x%x:"));
}
Number = UnicodeSPrint (
Str,
2 * IP6_STR_MAX_SIZE,
(CONST CHAR16 *) FormatString,
(UINTN) Ip6->Addr[Index],
(UINTN) Ip6->Addr[Index + 1]
);
}
Str = Str + Number;
if (Index + 2 == 16) {
*Str = L'\0';
if (*(Str - 1) == L':') {
*(Str - 1) = L'\0';
}
}
}
}
/**
Convert EFI_IP6_CONFIG_INTERFACE_ID to string format.
@param[out] String The buffer to store the converted string.
@param[in] IfId The pointer of EFI_IP6_CONFIG_INTERFACE_ID.
@retval EFI_SUCCESS The string converted successfully.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
**/
EFI_STATUS
Ip6ConvertInterfaceIdToString (
OUT CHAR16 *String,
IN EFI_IP6_CONFIG_INTERFACE_ID *IfId
)
{
UINT8 Index;
UINTN Number;
if ((String == NULL) || (IfId == NULL)) {
return EFI_INVALID_PARAMETER;
}
for (Index = 0; Index < 8; Index++) {
Number = UnicodeSPrint (
String,
2 * INTERFACE_ID_STR_STORAGE,
L"%x:",
(UINTN) IfId->Id[Index]
);
String = String + Number;
}
*(String - 1) = '\0';
return EFI_SUCCESS;
}
/**
Parse InterfaceId in string format and convert it to EFI_IP6_CONFIG_INTERFACE_ID.
@param[in] String The buffer of the string to be parsed.
@param[out] IfId The pointer of EFI_IP6_CONFIG_INTERFACE_ID.
@retval EFI_SUCCESS The operation finished successfully.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
**/
EFI_STATUS
Ip6ParseInterfaceIdFromString (
IN CONST CHAR16 *String,
OUT EFI_IP6_CONFIG_INTERFACE_ID *IfId
)
{
UINT8 Index;
CHAR16 *IfIdStr;
CHAR16 *TempStr;
UINTN NodeVal;
if ((String == NULL) || (IfId == NULL)) {
return EFI_INVALID_PARAMETER;
}
IfIdStr = (CHAR16 *) String;
ZeroMem (IfId, sizeof (EFI_IP6_CONFIG_INTERFACE_ID));
for (Index = 0; Index < 8; Index++) {
TempStr = IfIdStr;
while ((*IfIdStr != L'\0') && (*IfIdStr != L':')) {
IfIdStr++;
}
//
// The InterfaceId format is X:X:X:X, the number of X should not exceed 8.
// If the number of X is less than 8, zero is appended to the InterfaceId.
//
if ((*IfIdStr == ':') && (Index == 7)) {
return EFI_INVALID_PARAMETER;
}
//
// Convert the string to interface id. AsciiStrHexToUintn stops at the
// first character that is not a valid hex character, ':' or '\0' here.
//
NodeVal = StrHexToUintn (TempStr);
if (NodeVal > 0xFF) {
return EFI_INVALID_PARAMETER;
}
IfId->Id[Index] = (UINT8) NodeVal;
IfIdStr++;
}
return EFI_SUCCESS;
}
/**
Create Hii Extend Label OpCode as the start opcode and end opcode. It is
a help function.
@param[in] StartLabelNumber The number of start label.
@param[out] StartOpCodeHandle Points to the start opcode handle.
@param[out] StartLabel Points to the created start opcode.
@param[out] EndOpCodeHandle Points to the end opcode handle.
@param[out] EndLabel Points to the created end opcode.
@retval EFI_OUT_OF_RESOURCES Does not have sufficient resources to finish this
operation.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
@retval EFI_SUCCESS The operation completed successfully.
**/
EFI_STATUS
Ip6CreateOpCode (
IN UINT16 StartLabelNumber,
OUT VOID **StartOpCodeHandle,
OUT EFI_IFR_GUID_LABEL **StartLabel,
OUT VOID **EndOpCodeHandle,
OUT EFI_IFR_GUID_LABEL **EndLabel
)
{
EFI_STATUS Status;
EFI_IFR_GUID_LABEL *InternalStartLabel;
EFI_IFR_GUID_LABEL *InternalEndLabel;
if (StartOpCodeHandle == NULL || StartLabel == NULL || EndOpCodeHandle == NULL || EndLabel == NULL) {
return EFI_INVALID_PARAMETER;
}
*StartOpCodeHandle = NULL;
*EndOpCodeHandle = NULL;
Status = EFI_OUT_OF_RESOURCES;
//
// Initialize the container for dynamic opcodes.
//
*StartOpCodeHandle = HiiAllocateOpCodeHandle ();
if (*StartOpCodeHandle == NULL) {
return Status;
}
*EndOpCodeHandle = HiiAllocateOpCodeHandle ();
if (*EndOpCodeHandle == NULL) {
goto Exit;
}
//
// Create Hii Extend Label OpCode as the start opcode.
//
InternalStartLabel = (EFI_IFR_GUID_LABEL *) HiiCreateGuidOpCode (
*StartOpCodeHandle,
&gEfiIfrTianoGuid,
NULL,
sizeof (EFI_IFR_GUID_LABEL)
);
if (InternalStartLabel == NULL) {
goto Exit;
}
InternalStartLabel->ExtendOpCode = EFI_IFR_EXTEND_OP_LABEL;
InternalStartLabel->Number = StartLabelNumber;
//
// Create Hii Extend Label OpCode as the end opcode.
//
InternalEndLabel = (EFI_IFR_GUID_LABEL *) HiiCreateGuidOpCode (
*EndOpCodeHandle,
&gEfiIfrTianoGuid,
NULL,
sizeof (EFI_IFR_GUID_LABEL)
);
if (InternalEndLabel == NULL) {
goto Exit;
}
InternalEndLabel->ExtendOpCode = EFI_IFR_EXTEND_OP_LABEL;
InternalEndLabel->Number = LABEL_END;
*StartLabel = InternalStartLabel;
*EndLabel = InternalEndLabel;
return EFI_SUCCESS;
Exit:
if (*StartOpCodeHandle != NULL) {
HiiFreeOpCodeHandle (*StartOpCodeHandle);
}
if (*EndOpCodeHandle != NULL) {
HiiFreeOpCodeHandle (*EndOpCodeHandle);
}
return Status;
}
/**
This function converts the different format of address list to string format and
then generates the corresponding text opcode to illustarate the address info in
IP6 configuration page. Currently, the following formats are supported:
EFI_IP6_ADDRESS_INFO AddressType: Ip6ConfigNvHostAddress;
EFI_IPv6_ADDRESS AddressType: Ip6ConfigNvGatewayAddress and Ip6ConfigNvDnsAddress;
EFI_IP6_ROUTE_TABLE AddressType: Ip6ConfigNvRouteTable.
@param[in, out] String The pointer to the buffer to store the converted
string.
@param[in] HiiHandle A handle that was previously registered in the
HII Database.
@param[in] AddressType The address type.
@param[in] AddressInfo Pointer to the address list.
@param[in] AddressCount The address count of the address list.
@retval EFI_SUCCESS The operation finished successfully.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
@retval EFI_UNSUPPORTED The AddressType is not supported.
**/
EFI_STATUS
Ip6ConvertAddressListToString (
IN OUT CHAR16 *String,
IN EFI_HII_HANDLE HiiHandle,
IN IP6_CONFIG_NV_ADDRESS_TYPE AddressType,
IN VOID *AddressInfo,
IN UINTN AddressCount
)
{
UINTN Index;
UINTN Number;
CHAR16 *TempStr;
EFI_STATUS Status;
VOID *StartOpCodeHandle;
EFI_IFR_GUID_LABEL *StartLabel;
VOID *EndOpCodeHandle;
EFI_IFR_GUID_LABEL *EndLabel;
UINT16 StartLabelNumber;
EFI_STRING_ID TextTwo;
UINT8 *AddressHead;
UINT8 PrefixLength;
EFI_IPv6_ADDRESS *Address;
if ((String == NULL) || (HiiHandle == NULL) || (AddressInfo == NULL)) {
return EFI_INVALID_PARAMETER;
}
if (AddressType == Ip6ConfigNvHostAddress) {
StartLabelNumber = HOST_ADDRESS_LABEL;
} else if (AddressType == Ip6ConfigNvGatewayAddress) {
StartLabelNumber = GATEWAY_ADDRESS_LABEL;
} else if (AddressType == Ip6ConfigNvDnsAddress) {
StartLabelNumber = DNS_ADDRESS_LABEL;
} else if (AddressType == Ip6ConfigNvRouteTable) {
StartLabelNumber = ROUTE_TABLE_LABEL;
} else {
ASSERT (FALSE);
return EFI_UNSUPPORTED;
}
Status = Ip6CreateOpCode (
StartLabelNumber,
&StartOpCodeHandle,
&StartLabel,
&EndOpCodeHandle,
&EndLabel
);
if (EFI_ERROR (Status)) {
return Status;
}
AddressHead = (UINT8 *) AddressInfo;
for (Index = 0; Index < AddressCount; Index++) {
if (AddressType == Ip6ConfigNvHostAddress) {
AddressInfo = AddressHead + sizeof (EFI_IP6_ADDRESS_INFO) * Index;
Address = &((EFI_IP6_ADDRESS_INFO *) AddressInfo)->Address;
} else if (AddressType == Ip6ConfigNvRouteTable) {
AddressInfo = AddressHead + sizeof (EFI_IP6_ROUTE_TABLE) * Index;
Address = &((EFI_IP6_ROUTE_TABLE *) AddressInfo)->Destination;
} else {
AddressInfo = AddressHead + sizeof (EFI_IPv6_ADDRESS) * Index;
Address = AddressInfo;
}
//
// Convert the IP address info to string.
//
Ip6ToStr (Address, String);
TempStr = String + StrLen (String);
if ((AddressType == Ip6ConfigNvHostAddress) || (AddressType == Ip6ConfigNvRouteTable)) {
if (AddressType == Ip6ConfigNvHostAddress) {
PrefixLength = ((EFI_IP6_ADDRESS_INFO *) AddressInfo)->PrefixLength;
} else {
PrefixLength = ((EFI_IP6_ROUTE_TABLE *) AddressInfo)->PrefixLength;
}
//
// Append the prefix length to the string.
//
*TempStr = L'/';
TempStr++;
Number = UnicodeSPrint (TempStr, 6, L"%d", PrefixLength);
TempStr = TempStr + Number;
}
if (AddressType == Ip6ConfigNvRouteTable) {
//
// Append " >> " to the string.
//
Number = UnicodeSPrint (TempStr, 8, L" >> ");
TempStr = TempStr + Number;
//
// Append the gateway address to the string.
//
Ip6ToStr (&((EFI_IP6_ROUTE_TABLE *) AddressInfo)->Gateway, TempStr);
TempStr = TempStr + StrLen (TempStr);
}
//
// Generate a text opcode and update the UI.
//
TextTwo = HiiSetString (HiiHandle, 0, String, NULL);
if (TextTwo == 0) {
Status = EFI_INVALID_PARAMETER;
goto Exit;
}
HiiCreateTextOpCode (StartOpCodeHandle, STR_NULL, STR_NULL, TextTwo);
String = TempStr;
*String = IP6_ADDRESS_DELIMITER;
String++;
}
*(String - 1) = '\0';
Status = HiiUpdateForm (
HiiHandle, // HII handle
&gIp6ConfigNvDataGuid, // Formset GUID
FORMID_MAIN_FORM, // Form ID
StartOpCodeHandle, // Label for where to insert opcodes
EndOpCodeHandle // Replace data
);
Exit:
HiiFreeOpCodeHandle (StartOpCodeHandle);
HiiFreeOpCodeHandle (EndOpCodeHandle);
return Status;
}
/**
Parse address list in string format and convert it to a list array of node in
IP6_ADDRESS_INFO_ENTRY.
@param[in] String The buffer to string to be parsed.
@param[out] ListHead The list head of array.
@param[out] AddressCount The number of list nodes in the array.
@retval EFI_SUCCESS The operation finished successfully.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
@retval EFI_OUT_OF_RESOURCES Failed to perform the operation due to lack of resource.
**/
EFI_STATUS
Ip6ParseAddressListFromString (
IN CONST CHAR16 *String,
OUT LIST_ENTRY *ListHead,
OUT UINT32 *AddressCount
)
{
EFI_STATUS Status;
CHAR16 *LocalString;
CHAR16 *Temp;
CHAR16 *TempStr;
EFI_IP6_ADDRESS_INFO AddressInfo;
IP6_ADDRESS_INFO_ENTRY *Node;
BOOLEAN Last;
UINT32 Count;
if ((String == NULL) || (ListHead == NULL) || (AddressCount == NULL)) {
return EFI_INVALID_PARAMETER;
}
ZeroMem (&AddressInfo, sizeof (EFI_IP6_ADDRESS_INFO));
LocalString = (CHAR16 *) AllocateCopyPool (StrSize (String), String);
if (LocalString == NULL) {
return EFI_OUT_OF_RESOURCES;
}
//
// Clean the original address list.
//
Ip6FreeAddressInfoList (ListHead);
Temp = LocalString;
Last = FALSE;
Count = 0;
while (*LocalString != L'\0') {
TempStr = LocalString;
while ((*LocalString != L'\0') && (*LocalString != IP6_ADDRESS_DELIMITER)) {
LocalString++;
}
if (*LocalString == L'\0') {
Last = TRUE;
}
*LocalString = L'\0';
Status = NetLibStrToIp6andPrefix (TempStr, &AddressInfo.Address, &AddressInfo.PrefixLength);
if (EFI_ERROR (Status)) {
goto Error;
}
if (AddressInfo.PrefixLength == 0xFF) {
AddressInfo.PrefixLength = 0;
}
if (!NetIp6IsValidUnicast (&AddressInfo.Address)) {
Status = EFI_INVALID_PARAMETER;
goto Error;
}
Node = AllocatePool (sizeof (IP6_ADDRESS_INFO_ENTRY));
if (Node == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Error;
}
CopyMem (&Node->AddrInfo, &AddressInfo, sizeof (EFI_IP6_ADDRESS_INFO));
InsertTailList (ListHead, &Node->Link);
Count++;
if (Last) {
break;
}
LocalString++;
}
FreePool (Temp);
*AddressCount = Count;
return EFI_SUCCESS;
Error:
Ip6FreeAddressInfoList (ListHead);
FreePool (Temp);
return Status;
}
/**
This function converts the interface info to string and draws it to the IP6 UI.
The interface information includes interface name, interface type, hardware
address and route table information.
@param[in] IfInfo The pointer of EFI_IP6_CONFIG_INTERFACE_INFO.
@param[in] HiiHandle The handle that was previously registered in the
HII Database.
@param[in, out] IfrNvData Points to IP6_CONFIG_IFR_NVDATA.
@retval EFI_SUCCESS The operation finished successfully.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
@retval EFI_OUT_OF_RESOURCES The operation failed due to lack of resources.
**/
EFI_STATUS
Ip6ConvertInterfaceInfoToString (
IN EFI_IP6_CONFIG_INTERFACE_INFO *IfInfo,
IN EFI_HII_HANDLE HiiHandle,
IN OUT IP6_CONFIG_IFR_NVDATA *IfrNvData
)
{
UINT32 Index;
UINTN Number;
CHAR16 *String;
CHAR16 PortString[ADDRESS_STR_MAX_SIZE];
CHAR16 FormatString[8];
EFI_STRING_ID StringId;
if ((IfInfo == NULL) || (HiiHandle == NULL) || (IfrNvData == NULL)) {
return EFI_INVALID_PARAMETER;
}
//
// Print the interface name.
//
StringId = HiiSetString (
HiiHandle,
STRING_TOKEN (STR_IP6_INTERFACE_NAME_CONTENT),
IfInfo->Name,
NULL
);
if (StringId == 0) {
return EFI_OUT_OF_RESOURCES;
}
//
// Print the interface type.
//
if (IfInfo->IfType == Ip6InterfaceTypeEthernet) {
CopyMem (PortString, IP6_ETHERNET, sizeof (IP6_ETHERNET));
} else if (IfInfo->IfType == Ip6InterfaceTypeExperimentalEthernet) {
CopyMem (PortString, IP6_EXPERIMENTAL_ETHERNET, sizeof (IP6_EXPERIMENTAL_ETHERNET));
} else {
//
// Refer to RFC1700, chapter Number Hardware Type.
//
UnicodeSPrint (PortString, 6, L"%d", IfInfo->IfType);
}
StringId = HiiSetString (
HiiHandle,
STRING_TOKEN (STR_IP6_INTERFACE_TYPE_CONTENT),
PortString,
NULL
);
if (StringId == 0) {
return EFI_OUT_OF_RESOURCES;
}
//
// Convert the hardware address.
//
String = PortString;
ASSERT (IfInfo->HwAddressSize <= 32);
for (Index = 0; Index < IfInfo->HwAddressSize; Index++) {
if (IfInfo->HwAddress.Addr[Index] < 0x10) {
CopyMem (FormatString, L"0%x-", sizeof (L"0%x-"));
} else {
CopyMem (FormatString, L"%x-", sizeof (L"%x-"));
}
Number = UnicodeSPrint (
String,
8,
(CONST CHAR16 *) FormatString,
(UINTN) IfInfo->HwAddress.Addr[Index]
);
String = String + Number;
}
if (Index != 0) {
ASSERT (String > PortString);
String--;
*String = '\0';
}
//
// Print the hardware address.
//
StringId = HiiSetString (
HiiHandle,
STRING_TOKEN (STR_IP6_MAC_ADDRESS_CONTENT),
PortString,
NULL
);
if (StringId == 0) {
return EFI_OUT_OF_RESOURCES;
}
return EFI_SUCCESS;
}
/**
Build the address info list from list array of node in IP6_ADDRESS_INFO_ENTRY.
@param[in] Instance Points to IP6 config instance data.
@param[in] AddressType The address type.
@param[out] AddressInfo The pointer to the buffer to store the address list.
@param[out] AddressSize The address size of the address list.
@retval EFI_SUCCESS The operation finished successfully.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
@retval EFI_UNSUPPORTED The AddressType is not supported.
**/
EFI_STATUS
Ip6BuildNvAddressInfo (
IN IP6_CONFIG_INSTANCE *Instance,
IN IP6_CONFIG_NV_ADDRESS_TYPE AddressType,
OUT VOID **AddressInfo,
OUT UINTN *AddressSize
)
{
IP6_CONFIG_NVDATA *Ip6NvData;
LIST_ENTRY *Entry;
LIST_ENTRY *ListHead;
IP6_ADDRESS_INFO_ENTRY *Node;
VOID *AddressList;
VOID *TmpStr;
UINTN DataSize;
EFI_IPv6_ADDRESS *Ip6Address;
EFI_IP6_CONFIG_MANUAL_ADDRESS *ManualAddress;
if ((Instance == NULL) || (AddressInfo == NULL) || (AddressSize == NULL)) {
return EFI_INVALID_PARAMETER;
}
NET_CHECK_SIGNATURE (Instance, IP6_CONFIG_INSTANCE_SIGNATURE);
Ip6NvData = &Instance->Ip6NvData;
if (AddressType == Ip6ConfigNvHostAddress) {
ListHead = &Ip6NvData->ManualAddress;
DataSize = sizeof (EFI_IP6_CONFIG_MANUAL_ADDRESS) * Ip6NvData->ManualAddressCount;
} else if (AddressType == Ip6ConfigNvGatewayAddress) {
ListHead = &Ip6NvData->GatewayAddress;
DataSize = sizeof (EFI_IPv6_ADDRESS) * Ip6NvData->GatewayAddressCount;
} else if (AddressType == Ip6ConfigNvDnsAddress) {
ListHead = &Ip6NvData->DnsAddress;
DataSize = sizeof (EFI_IPv6_ADDRESS) * Ip6NvData->DnsAddressCount;
} else {
return EFI_UNSUPPORTED;
}
AddressList = AllocateZeroPool (DataSize);
if (AddressList == NULL) {
return EFI_OUT_OF_RESOURCES;
}
TmpStr = AddressList;
NET_LIST_FOR_EACH (Entry, ListHead) {
Node = NET_LIST_USER_STRUCT (Entry, IP6_ADDRESS_INFO_ENTRY, Link);
if (AddressType == Ip6ConfigNvHostAddress) {
ManualAddress = (EFI_IP6_CONFIG_MANUAL_ADDRESS *) AddressList;
IP6_COPY_ADDRESS (&ManualAddress->Address, &Node->AddrInfo.Address);
ManualAddress->PrefixLength = Node->AddrInfo.PrefixLength;
AddressList = (UINT8 *) AddressList + sizeof (EFI_IP6_CONFIG_MANUAL_ADDRESS);
} else {
Ip6Address = (EFI_IPv6_ADDRESS *) AddressList;
IP6_COPY_ADDRESS (Ip6Address, &Node->AddrInfo.Address);
AddressList = (UINT8 *) AddressList + sizeof (EFI_IPv6_ADDRESS);
}
}
*AddressInfo = TmpStr;
*AddressSize = DataSize;
return EFI_SUCCESS;
}
/**
Convert the IP6 configuration data into the IFR data.
@param[in, out] IfrNvData The IFR NV data.
@param[in] Instance The IP6 config instance data.
@retval EFI_SUCCESS The operation finished successfully.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
@retval EFI_UNSUPPORTED The policy is not supported in the current implementation.
@retval Others Other errors as indicated.
**/
EFI_STATUS
Ip6ConvertConfigNvDataToIfrNvData (
IN OUT IP6_CONFIG_IFR_NVDATA *IfrNvData,
IN IP6_CONFIG_INSTANCE *Instance
)
{
IP6_CONFIG_NVDATA *Ip6NvData;
EFI_IP6_CONFIG_PROTOCOL *Ip6Config;
UINTN DataSize;
VOID *Data;
EFI_STATUS Status;
EFI_IP6_CONFIG_POLICY Policy;
EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS DadXmits;
EFI_HII_HANDLE HiiHandle;
if ((IfrNvData == NULL) || (Instance == NULL)) {
return EFI_INVALID_PARAMETER;
}
NET_CHECK_SIGNATURE (Instance, IP6_CONFIG_INSTANCE_SIGNATURE);
Ip6Config = &Instance->Ip6Config;
Ip6NvData = &Instance->Ip6NvData;
Data = NULL;
DataSize = 0;
HiiHandle = Instance->CallbackInfo.RegisteredHandle;
//
// Get the current interface info.
//
Status = Ip6ConfigNvGetData (
Ip6Config,
Ip6ConfigDataTypeInterfaceInfo,
&DataSize,
(VOID **) &Data
);
if (EFI_ERROR (Status)) {
goto Exit;
}
//
// Convert the interface info to string and print.
//
Status = Ip6ConvertInterfaceInfoToString (
(EFI_IP6_CONFIG_INTERFACE_INFO *) Data,
HiiHandle,
IfrNvData
);
if (EFI_ERROR (Status)) {
goto Exit;
}
//
// Get the interface id.
//
DataSize = sizeof (EFI_IP6_CONFIG_INTERFACE_ID);
ZeroMem (&Ip6NvData->InterfaceId, DataSize);
Status = Ip6Config->GetData (
Ip6Config,
Ip6ConfigDataTypeAltInterfaceId,
&DataSize,
&Ip6NvData->InterfaceId
);
if (EFI_ERROR (Status)) {
goto Exit;
}
Ip6ConvertInterfaceIdToString (IfrNvData->InterfaceId, &Ip6NvData->InterfaceId);
//
// Get current policy.
//
DataSize = sizeof (EFI_IP6_CONFIG_POLICY);
Status = Ip6Config->GetData (
Ip6Config,
Ip6ConfigDataTypePolicy,
&DataSize,
&Policy
);
if (EFI_ERROR (Status)) {
goto Exit;
}
if (Policy == Ip6ConfigPolicyManual) {
IfrNvData->Policy = IP6_POLICY_MANUAL;
} else if (Policy == Ip6ConfigPolicyAutomatic) {
IfrNvData->Policy = IP6_POLICY_AUTO;
} else {
ASSERT (FALSE);
Status = EFI_UNSUPPORTED;
goto Exit;
}
//
// Get Duplicate Address Detection Transmits count.
//
DataSize = sizeof (EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS);
Status = Ip6Config->GetData (
Ip6Config,
Ip6ConfigDataTypeDupAddrDetectTransmits,
&DataSize,
&DadXmits
);
if (EFI_ERROR (Status)) {
goto Exit;
}
IfrNvData->DadTransmitCount = DadXmits.DupAddrDetectTransmits;
Exit:
if (Data != NULL) {
FreePool (Data);
}
return Status;
}
/**
Convert IFR data into IP6 configuration data. The policy, alternative interface
ID, and DAD transmit counts, and will be saved.
@param[in] IfrNvData The IFR NV data.
@param[in, out] Instance The IP6 config instance data.
@retval EFI_SUCCESS The operation finished successfully.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
@retval Others Other errors as indicated.
**/
EFI_STATUS
Ip6ConvertIfrNvDataToConfigNvDataGeneral (
IN IP6_CONFIG_IFR_NVDATA *IfrNvData,
IN OUT IP6_CONFIG_INSTANCE *Instance
)
{
IP6_CONFIG_NVDATA *Ip6NvData;
EFI_IP6_CONFIG_PROTOCOL *Ip6Config;
EFI_STATUS Status;
if ((IfrNvData == NULL) || (Instance == NULL)) {
return EFI_INVALID_PARAMETER;
}
NET_CHECK_SIGNATURE (Instance, IP6_CONFIG_INSTANCE_SIGNATURE);
Ip6NvData = &Instance->Ip6NvData;
Ip6Config = &Instance->Ip6Config;
//
// Update those fields which don't have INTERACTIVE attribute.
//
if (IfrNvData->Policy == IP6_POLICY_AUTO) {
Ip6NvData->Policy = Ip6ConfigPolicyAutomatic;
} else if (IfrNvData->Policy == IP6_POLICY_MANUAL) {
Ip6NvData->Policy = Ip6ConfigPolicyManual;
}
Ip6NvData->DadTransmitCount.DupAddrDetectTransmits = IfrNvData->DadTransmitCount;
//
// Set the configured policy.
//
Status = Ip6Config->SetData (
Ip6Config,
Ip6ConfigDataTypePolicy,
sizeof (EFI_IP6_CONFIG_POLICY),
&Ip6NvData->Policy
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Set the duplicate address detection transmits count.
//
Status = Ip6Config->SetData (
Ip6Config,
Ip6ConfigDataTypeDupAddrDetectTransmits,
sizeof (EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS),
&Ip6NvData->DadTransmitCount
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Set the alternative interface ID
//
Status = Ip6Config->SetData (
Ip6Config,
Ip6ConfigDataTypeAltInterfaceId,
sizeof (EFI_IP6_CONFIG_INTERFACE_ID),
&Ip6NvData->InterfaceId
);
if (EFI_ERROR (Status)) {
return Status;
}
return EFI_SUCCESS;
}
/**
Convert IFR data into IP6 configuration data. The policy, configured
manual address, gateway address, and DNS server address will be saved.
@param[in] IfrNvData The IFR NV data.
@param[in, out] Instance The IP6 config instance data.
@retval EFI_SUCCESS The operation finished successfully.
@retval EFI_INVALID_PARAMETER Any input parameter is invalid.
@retval Others Other errors as indicated.
**/
EFI_STATUS
Ip6ConvertIfrNvDataToConfigNvDataAdvanced (
IN IP6_CONFIG_IFR_NVDATA *IfrNvData,
IN OUT IP6_CONFIG_INSTANCE *Instance
)
{
IP6_CONFIG_NVDATA *Ip6NvData;
EFI_IP6_CONFIG_PROTOCOL *Ip6Config;
EFI_STATUS Status;
EFI_IP6_CONFIG_MANUAL_ADDRESS *ManualAddress;
EFI_IPv6_ADDRESS *Address;
BOOLEAN IsAddressOk;
EFI_EVENT SetAddressEvent;
EFI_EVENT TimeoutEvent;
UINTN DataSize;
if ((IfrNvData == NULL) || (Instance == NULL)) {
return EFI_INVALID_PARAMETER;
}
if (IfrNvData->Policy == IP6_POLICY_AUTO) {
return EFI_SUCCESS;
}
NET_CHECK_SIGNATURE (Instance, IP6_CONFIG_INSTANCE_SIGNATURE);
Ip6NvData = &Instance->Ip6NvData;
Ip6Config = &Instance->Ip6Config;
//
// Update those fields which don't have INTERACTIVE attribute.
//
Ip6NvData->Policy = Ip6ConfigPolicyManual;
//
// Set the configured policy.
//
Status = Ip6Config->SetData (
Ip6Config,
Ip6ConfigDataTypePolicy,
sizeof (EFI_IP6_CONFIG_POLICY),
&Ip6NvData->Policy
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Create events & timers for asynchronous settings.
//
SetAddressEvent = NULL;
TimeoutEvent = NULL;
ManualAddress = NULL;
Address = NULL;
Status = gBS->CreateEvent (
EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
Ip6ConfigManualAddressNotify,
&IsAddressOk,
&SetAddressEvent
);
if (EFI_ERROR (Status)) {
goto Exit;
}
Status = gBS->CreateEvent (
EVT_TIMER,
TPL_CALLBACK,
NULL,
NULL,
&TimeoutEvent
);
if (EFI_ERROR (Status)) {
goto Exit;
}
//
// Set the manual address list. This is an asynchronous process.
//
if (!IsListEmpty (&Ip6NvData->ManualAddress) && (Ip6NvData->ManualAddressCount != 0)) {
Status = Ip6BuildNvAddressInfo (
Instance,
Ip6ConfigNvHostAddress,
(VOID **) &ManualAddress,
&DataSize
);
if (EFI_ERROR (Status)) {
goto Exit;
}
IsAddressOk = FALSE;
Status = Ip6Config->RegisterDataNotify (
Ip6Config,
Ip6ConfigDataTypeManualAddress,
SetAddressEvent
);
if (EFI_ERROR (Status)) {
goto Exit;
}
Status = Ip6Config->SetData (
Ip6Config,
Ip6ConfigDataTypeManualAddress,
DataSize,
(VOID *) ManualAddress
);
if (Status == EFI_NOT_READY) {
gBS->SetTimer (TimeoutEvent, TimerRelative, 50000000);
while (EFI_ERROR (gBS->CheckEvent (TimeoutEvent))) {
if (IsAddressOk) {
Status = EFI_SUCCESS;
}
break;
}
}
Status = Ip6Config->UnregisterDataNotify (
Ip6Config,
Ip6ConfigDataTypeManualAddress,
SetAddressEvent
);
if (EFI_ERROR (Status)) {
goto Exit;
}
}
//
// Set gateway address list.
//
if (!IsListEmpty (&Ip6NvData->GatewayAddress) && (Ip6NvData->GatewayAddressCount != 0)) {
Status = Ip6BuildNvAddressInfo (
Instance,
Ip6ConfigNvGatewayAddress,
(VOID **) &Address,
&DataSize
);
if (EFI_ERROR (Status)) {
goto Exit;
}
Status = Ip6Config->SetData (
Ip6Config,
Ip6ConfigDataTypeGateway,
DataSize,
(VOID *) Address
);
if (EFI_ERROR (Status)) {
goto Exit;
}
FreePool (Address);
Address = NULL;
}
//
// Set DNS server address list.
//
if (!IsListEmpty (&Ip6NvData->DnsAddress) && (Ip6NvData->DnsAddressCount != 0)) {
Status = Ip6BuildNvAddressInfo (
Instance,
Ip6ConfigNvDnsAddress,
(VOID **) &Address,
&DataSize
);
if (EFI_ERROR (Status)) {
goto Exit;
}
Status = Ip6Config->SetData (
Ip6Config,
Ip6ConfigDataTypeDnsServer,
DataSize,
(VOID *) Address
);
if (EFI_ERROR (Status)) {
goto Exit;
}
}
Status = EFI_SUCCESS;
Exit:
if (SetAddressEvent != NULL) {
gBS->CloseEvent (SetAddressEvent);
}
if (TimeoutEvent != NULL) {
gBS->CloseEvent (TimeoutEvent);
}
if (ManualAddress != NULL) {
FreePool (ManualAddress);
}
if (Address != NULL) {
FreePool (Address);
}
return Status;
}
/**
This function allows the caller to request the current
configuration for one or more named elements. The resulting
string is in <ConfigAltResp> format. Any and all alternative
configuration strings shall also be appended to the end of the
current configuration string. If they are, they must appear
after the current configuration. They must contain the same
routing (GUID, NAME, PATH) as the current configuration string.
They must have an additional description indicating the type of
alternative configuration the string represents,
"ALTCFG=<StringToken>". That <StringToken> (when
converted from Hex UNICODE to binary) is a reference to a
string in the associated string pack.
@param[in] This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
@param[in] Request A null-terminated Unicode string in
<ConfigRequest> format. Note that this
includes the routing information as well as
the configurable name / value pairs. It is
invalid for this string to be in
<MultiConfigRequest> format.
@param[out] Progress On return, points to a character in the
Request string. Points to the string's null
terminator if request was successful. Points
to the most recent "&" before the first
failing name / value pair (or the beginning
of the string if the failure is in the first
name / value pair) if the request was not
successful.
@param[out] Results A null-terminated Unicode string in
<ConfigAltResp> format which has all values
filled in for the names in the Request string.
String to be allocated by the called function.
@retval EFI_SUCCESS The Results string is filled with the
values corresponding to all requested
names.
@retval EFI_OUT_OF_RESOURCES Not enough memory to store the
parts of the results that must be
stored awaiting possible future
protocols.
@retval EFI_INVALID_PARAMETER For example, passing in a NULL
for the Request parameter
would result in this type of
error. In this case, the
Progress parameter would be
set to NULL.
@retval EFI_NOT_FOUND Routing data doesn't match any
known driver. Progress set to the
first character in the routing header.
Note: There is no requirement that the
driver validate the routing data. It
must skip the <ConfigHdr> in order to
process the names.
@retval EFI_INVALID_PARAMETER Illegal syntax. Progress set
to most recent & before the
error or the beginning of the
string.
@retval EFI_INVALID_PARAMETER Unknown name. Progress points
to the & before the name in
question. Currently not implemented.
**/
EFI_STATUS
EFIAPI
Ip6FormExtractConfig (
IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
IN CONST EFI_STRING Request,
OUT EFI_STRING *Progress,
OUT EFI_STRING *Results
)
{
EFI_STATUS Status;
IP6_FORM_CALLBACK_INFO *Private;
IP6_CONFIG_INSTANCE *Ip6ConfigInstance;
IP6_CONFIG_IFR_NVDATA *IfrNvData;
EFI_STRING ConfigRequestHdr;
EFI_STRING ConfigRequest;
BOOLEAN AllocatedRequest;
UINTN Size;
UINTN BufferSize;
if (This == NULL || Progress == NULL || Results == NULL) {
return EFI_INVALID_PARAMETER;
}
*Progress = Request;
if ((Request != NULL) &&
!HiiIsConfigHdrMatch (Request, &gIp6ConfigNvDataGuid, mIp6ConfigStorageName)) {
return EFI_NOT_FOUND;
}
ConfigRequestHdr = NULL;
ConfigRequest = NULL;
AllocatedRequest = FALSE;
Size = 0;
Private = IP6_FORM_CALLBACK_INFO_FROM_CONFIG_ACCESS (This);
Ip6ConfigInstance = IP6_CONFIG_INSTANCE_FROM_FORM_CALLBACK (Private);
BufferSize = sizeof (IP6_CONFIG_IFR_NVDATA);
IfrNvData = (IP6_CONFIG_IFR_NVDATA *) AllocateZeroPool (BufferSize);
if (IfrNvData == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Status = Ip6ConvertConfigNvDataToIfrNvData (IfrNvData, Ip6ConfigInstance);
if (EFI_ERROR (Status)) {
goto Exit;
}
ConfigRequest = Request;
if ((Request == NULL) || (StrStr (Request, L"OFFSET") == NULL)) {
//
// Request has no request element, construct full request string.
// Allocate and fill a buffer large enough to hold the <ConfigHdr> template
// followed by "&OFFSET=0&WIDTH=WWWWWWWWWWWWWWWW" followed by a Null-terminator.
//
ConfigRequestHdr = HiiConstructConfigHdr (
&gIp6ConfigNvDataGuid,
mIp6ConfigStorageName,
Private->ChildHandle
);
Size = (StrLen (ConfigRequestHdr) + 32 + 1) * sizeof (CHAR16);
ConfigRequest = AllocateZeroPool (Size);
ASSERT (ConfigRequest != NULL);
AllocatedRequest = TRUE;
UnicodeSPrint (
ConfigRequest,
Size,
L"%s&OFFSET=0&WIDTH=%016LX",
ConfigRequestHdr,
(UINT64) BufferSize
);
FreePool (ConfigRequestHdr);
}
//
// Convert buffer data to <ConfigResp> by helper function BlockToConfig()
//
Status = gHiiConfigRouting->BlockToConfig (
gHiiConfigRouting,
ConfigRequest,
(UINT8 *) IfrNvData,
BufferSize,
Results,
Progress
);
Exit:
FreePool (IfrNvData);
//
// Free the allocated config request string.
//
if (AllocatedRequest) {
FreePool (ConfigRequest);
ConfigRequest = NULL;
}
//
// Set Progress string to the original request string.
//
if (Request == NULL) {
*Progress = NULL;
} else if (StrStr (Request, L"OFFSET") == NULL) {
*Progress = Request + StrLen (Request);
}
return Status;
}
/**
This function applies changes in a driver's configuration.
Input is a Configuration, which has the routing data for this
driver followed by name / value configuration pairs. The driver
must apply those pairs to its configurable storage. If the
driver's configuration is stored in a linear block of data
and the driver's name / value pairs are in <BlockConfig>
format, it may use the ConfigToBlock helper function (above) to
simplify the job. Currently not implemented.
@param[in] This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
@param[in] Configuration A null-terminated Unicode string in
<ConfigString> format.
@param[out] Progress A pointer to a string filled in with the
offset of the most recent '&' before the
first failing name / value pair (or the
beginn ing of the string if the failure
is in the first name / value pair) or
the terminating NULL if all was
successful.
@retval EFI_SUCCESS The results have been distributed or are
awaiting distribution.
@retval EFI_OUT_OF_MEMORY Not enough memory to store the
parts of the results that must be
stored awaiting possible future
protocols.
@retval EFI_INVALID_PARAMETERS Passing in a NULL for the
Results parameter would result
in this type of error.
@retval EFI_NOT_FOUND Target for the specified routing data
was not found.
**/
EFI_STATUS
EFIAPI
Ip6FormRouteConfig (
IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
IN CONST EFI_STRING Configuration,
OUT EFI_STRING *Progress
)
{
if (This == NULL || Configuration == NULL || Progress == NULL) {
return EFI_INVALID_PARAMETER;
}
//
// Check routing data in <ConfigHdr>.
// Note: if only one Storage is used, then this checking could be skipped.
//
if (!HiiIsConfigHdrMatch (Configuration, &gIp6ConfigNvDataGuid, mIp6ConfigStorageName)) {
*Progress = Configuration;
return EFI_NOT_FOUND;
}
*Progress = Configuration + StrLen (Configuration);
return EFI_SUCCESS;
}
/**
Display host addresses, route table, DNS addresses and gateway addresses in
"IPv6 Current Setting" page.
@param[in] Instance The IP6 config instance data.
@retval EFI_SUCCESS The operation finished successfully.
@retval Others Other errors as indicated.
**/
EFI_STATUS
Ip6GetCurrentSetting (
IN IP6_CONFIG_INSTANCE *Instance
)
{
EFI_IP6_CONFIG_PROTOCOL *Ip6Config;
EFI_HII_HANDLE HiiHandle;
EFI_IP6_CONFIG_INTERFACE_INFO *Data;
UINTN DataSize;
EFI_STATUS Status;
CHAR16 PortString[ADDRESS_STR_MAX_SIZE];
EFI_IP6_CONFIG_INTERFACE_INFO *IfInfo;
Ip6Config = &Instance->Ip6Config;
HiiHandle = Instance->CallbackInfo.RegisteredHandle;
Data = NULL;
//
// Get current interface info.
//
Status = Ip6ConfigNvGetData (
Ip6Config,
Ip6ConfigDataTypeInterfaceInfo,
&DataSize,
(VOID **) &Data
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Generate dynamic text opcode for host address and draw it.
//
IfInfo = (EFI_IP6_CONFIG_INTERFACE_INFO *) Data;
Status = Ip6ConvertAddressListToString (
PortString,
HiiHandle,
Ip6ConfigNvHostAddress,
IfInfo->AddressInfo,
IfInfo->AddressInfoCount
);
if (EFI_ERROR (Status)) {
FreePool (Data);
return Status;
}
//
// Generate the dynamic text opcode for route table and draw it.
//
Status = Ip6ConvertAddressListToString (
PortString,
HiiHandle,
Ip6ConfigNvRouteTable,
IfInfo->RouteTable,
IfInfo->RouteCount
);
if (EFI_ERROR (Status)) {
FreePool (Data);
return Status;
}
//
// Get DNS server list.
//
FreePool (Data);
DataSize = 0;
Data = NULL;
Status = Ip6ConfigNvGetData (
Ip6Config,
Ip6ConfigDataTypeDnsServer,
&DataSize,
(VOID **) &Data
);
if (EFI_ERROR (Status) && (Status != EFI_NOT_FOUND)) {
if (Data != NULL) {
FreePool (Data);
}
return Status;
}
if (DataSize > 0) {
//
// Generate the dynamic text opcode for DNS server and draw it.
//
Status = Ip6ConvertAddressListToString (
PortString,
HiiHandle,
Ip6ConfigNvDnsAddress,
Data,
DataSize / sizeof (EFI_IPv6_ADDRESS)
);
if (EFI_ERROR (Status)) {
FreePool (Data);
return Status;
}
}
//
// Get gateway adderss list.
//
if (Data != NULL) {
FreePool (Data);
}
DataSize = 0;
Data = NULL;
Status = Ip6ConfigNvGetData (
Ip6Config,
Ip6ConfigDataTypeGateway,
&DataSize,
(VOID **) &Data
);
if (EFI_ERROR (Status) && (Status != EFI_NOT_FOUND)) {
if (Data != NULL) {
FreePool (Data);
}
return Status;
}
if (DataSize > 0) {
//
// Generate the dynamic text opcode for gateway and draw it.
//
Status = Ip6ConvertAddressListToString (
PortString,
HiiHandle,
Ip6ConfigNvGatewayAddress,
Data,
DataSize / sizeof (EFI_IPv6_ADDRESS)
);
if (EFI_ERROR (Status)) {
FreePool (Data);
return Status;
}
}
if (Data != NULL) {
FreePool (Data);
}
return EFI_SUCCESS;
}
/**
This function is called to provide results data to the driver.
This data consists of a unique key that is used to identify
which data is either being passed back or being asked for.
@param[in] This Points to the EFI_HII_CONFIG_ACCESS_PROTOCOL.
@param[in] Action Specifies the type of action taken by the browser.
@param[in] QuestionId A unique value which is sent to the original
exporting driver so that it can identify the type
of data to expect. The format of the data tends to
vary based on the opcode that generated the callback.
@param[in] Type The type of value for the question.
@param[in] Value A pointer to the data being sent to the original
exporting driver.
@param[out] ActionRequest On return, points to the action requested by the
callback function.
@retval EFI_SUCCESS The callback successfully handled the action.
@retval EFI_OUT_OF_RESOURCES Not enough storage is available to hold the
variable and its data.
@retval EFI_DEVICE_ERROR The variable could not be saved.
@retval EFI_UNSUPPORTED The specified Action is not supported by the
callback. Currently not implemented.
@retval EFI_INVALID_PARAMETER Passed in the wrong parameter.
@retval Others Other errors as indicated.
**/
EFI_STATUS
EFIAPI
Ip6FormCallback (
IN CONST EFI_HII_CONFIG_ACCESS_PROTOCOL *This,
IN EFI_BROWSER_ACTION Action,
IN EFI_QUESTION_ID QuestionId,
IN UINT8 Type,
IN EFI_IFR_TYPE_VALUE *Value,
OUT EFI_BROWSER_ACTION_REQUEST *ActionRequest
)
{
IP6_FORM_CALLBACK_INFO *Private;
UINTN BufferSize;
IP6_CONFIG_IFR_NVDATA *IfrNvData;
EFI_STATUS Status;
EFI_INPUT_KEY Key;
IP6_CONFIG_INSTANCE *Instance;
IP6_CONFIG_NVDATA *Ip6NvData;
if (This == NULL) {
return EFI_INVALID_PARAMETER;
}
Private = IP6_FORM_CALLBACK_INFO_FROM_CONFIG_ACCESS (This);
Instance = IP6_CONFIG_INSTANCE_FROM_FORM_CALLBACK (Private);
Ip6NvData = &Instance->Ip6NvData;
if ((Action == EFI_BROWSER_ACTION_FORM_OPEN) || (Action == EFI_BROWSER_ACTION_FORM_CLOSE)){
return EFI_SUCCESS;
}
if (Action != EFI_BROWSER_ACTION_CHANGING && Action != EFI_BROWSER_ACTION_CHANGED) {
return EFI_UNSUPPORTED;
}
if ((Value == NULL) || (ActionRequest == NULL)) {
return EFI_INVALID_PARAMETER;
}
//
// Retrieve uncommitted data from Browser
//
BufferSize = sizeof (IP6_CONFIG_IFR_NVDATA);
IfrNvData = AllocateZeroPool (BufferSize);
if (IfrNvData == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Status = EFI_SUCCESS;
HiiGetBrowserData (NULL, NULL, BufferSize, (UINT8 *) IfrNvData);
if (Action == EFI_BROWSER_ACTION_CHANGING) {
switch (QuestionId) {
case KEY_GET_CURRENT_SETTING:
Status = Ip6GetCurrentSetting (Instance);
break;
default:
break;
}
} else if (Action == EFI_BROWSER_ACTION_CHANGED) {
switch (QuestionId) {
case KEY_SAVE_CONFIG_CHANGES:
Status = Ip6ConvertIfrNvDataToConfigNvDataAdvanced (IfrNvData, Instance);
if (EFI_ERROR (Status)) {
break;
}
Status = Ip6GetCurrentSetting (Instance);
*ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_SUBMIT_EXIT;
break;
case KEY_IGNORE_CONFIG_CHANGES:
Ip6FreeAddressInfoList (&Ip6NvData->ManualAddress);
Ip6FreeAddressInfoList (&Ip6NvData->GatewayAddress);
Ip6FreeAddressInfoList (&Ip6NvData->DnsAddress);
Ip6NvData->ManualAddressCount = 0;
Ip6NvData->GatewayAddressCount = 0;
Ip6NvData->DnsAddressCount = 0;
*ActionRequest = EFI_BROWSER_ACTION_REQUEST_FORM_DISCARD_EXIT;
break;
case KEY_SAVE_CHANGES:
Status = Ip6ConvertIfrNvDataToConfigNvDataGeneral (IfrNvData, Instance);
if (EFI_ERROR (Status)) {
break;
}
*ActionRequest = EFI_BROWSER_ACTION_REQUEST_SUBMIT;
break;
case KEY_INTERFACE_ID:
Status = Ip6ParseInterfaceIdFromString (IfrNvData->InterfaceId, &Ip6NvData->InterfaceId);
if (EFI_ERROR (Status)) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Invalid Interface ID!",
NULL
);
}
break;
case KEY_MANUAL_ADDRESS:
Status = Ip6ParseAddressListFromString (
IfrNvData->ManualAddress,
&Ip6NvData->ManualAddress,
&Ip6NvData->ManualAddressCount
);
if (EFI_ERROR (Status)) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Invalid Host Addresses!",
NULL
);
}
break;
case KEY_GATEWAY_ADDRESS:
Status = Ip6ParseAddressListFromString (
IfrNvData->GatewayAddress,
&Ip6NvData->GatewayAddress,
&Ip6NvData->GatewayAddressCount
);
if (EFI_ERROR (Status)) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Invalid Gateway Addresses!",
NULL
);
}
break;
case KEY_DNS_ADDRESS:
Status = Ip6ParseAddressListFromString (
IfrNvData->DnsAddress,
&Ip6NvData->DnsAddress,
&Ip6NvData->DnsAddressCount
);
if (EFI_ERROR (Status)) {
CreatePopUp (
EFI_LIGHTGRAY | EFI_BACKGROUND_BLUE,
&Key,
L"Invalid DNS Addresses!",
NULL
);
}
break;
default:
break;
}
}
if (!EFI_ERROR (Status)) {
//
// Pass changed uncommitted data back to Form Browser.
//
BufferSize = sizeof (IP6_CONFIG_IFR_NVDATA);
HiiSetBrowserData (NULL, NULL, BufferSize, (UINT8 *) IfrNvData, NULL);
}
FreePool (IfrNvData);
return Status;
}
/**
Install HII Config Access protocol for network device and allocate resources.
@param[in, out] Instance The IP6_CONFIG_INSTANCE to create a form.
@retval EFI_SUCCESS The HII Config Access protocol is installed.
@retval EFI_OUT_OF_RESOURCES Failed to allocate memory.
@retval Others Other errors as indicated.
**/
EFI_STATUS
Ip6ConfigFormInit (
IN OUT IP6_CONFIG_INSTANCE *Instance
)
{
EFI_STATUS Status;
IP6_SERVICE *IpSb;
IP6_FORM_CALLBACK_INFO *CallbackInfo;
EFI_HII_CONFIG_ACCESS_PROTOCOL *ConfigAccess;
VENDOR_DEVICE_PATH VendorDeviceNode;
EFI_SERVICE_BINDING_PROTOCOL *MnpSb;
CHAR16 *MacString;
CHAR16 MenuString[128];
CHAR16 PortString[128];
CHAR16 *OldMenuString;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
IpSb = IP6_SERVICE_FROM_IP6_CONFIG_INSTANCE (Instance);
ASSERT (IpSb != NULL);
Status = gBS->HandleProtocol (
IpSb->Controller,
&gEfiDevicePathProtocolGuid,
(VOID **) &ParentDevicePath
);
if (EFI_ERROR (Status)) {
return Status;
}
CallbackInfo = &Instance->CallbackInfo;
CallbackInfo->Signature = IP6_FORM_CALLBACK_INFO_SIGNATURE;
//
// Construct device path node for EFI HII Config Access protocol,
// which consists of controller physical device path and one hardware
// vendor guid node.
//
ZeroMem (&VendorDeviceNode, sizeof (VENDOR_DEVICE_PATH));
VendorDeviceNode.Header.Type = HARDWARE_DEVICE_PATH;
VendorDeviceNode.Header.SubType = HW_VENDOR_DP;
CopyGuid (&VendorDeviceNode.Guid, &gEfiCallerIdGuid);
SetDevicePathNodeLength (&VendorDeviceNode.Header, sizeof (VENDOR_DEVICE_PATH));
CallbackInfo->HiiVendorDevicePath = AppendDevicePathNode (
ParentDevicePath,
(EFI_DEVICE_PATH_PROTOCOL *) &VendorDeviceNode
);
if (CallbackInfo->HiiVendorDevicePath == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Error;
}
ConfigAccess = &CallbackInfo->HiiConfigAccess;
ConfigAccess->ExtractConfig = Ip6FormExtractConfig;
ConfigAccess->RouteConfig = Ip6FormRouteConfig;
ConfigAccess->Callback = Ip6FormCallback;
//
// Install Device Path Protocol and Config Access protocol on new handle
//
Status = gBS->InstallMultipleProtocolInterfaces (
&CallbackInfo->ChildHandle,
&gEfiDevicePathProtocolGuid,
CallbackInfo->HiiVendorDevicePath,
&gEfiHiiConfigAccessProtocolGuid,
ConfigAccess,
NULL
);
if (!EFI_ERROR (Status)) {
//
// Open the Parent Handle for the child
//
Status = gBS->OpenProtocol (
IpSb->Controller,
&gEfiManagedNetworkServiceBindingProtocolGuid,
(VOID **) &MnpSb,
IpSb->Image,
CallbackInfo->ChildHandle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
}
if (EFI_ERROR (Status)) {
goto Error;
}
//
// Publish our HII data
//
CallbackInfo->RegisteredHandle = HiiAddPackages (
&gIp6ConfigNvDataGuid,
CallbackInfo->ChildHandle,
Ip6DxeStrings,
Ip6ConfigBin,
NULL
);
if (CallbackInfo->RegisteredHandle == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Error;
}
//
// Append MAC string in the menu help string and tile help string
//
Status = NetLibGetMacString (IpSb->Controller, IpSb->Image, &MacString);
if (!EFI_ERROR (Status)) {
OldMenuString = HiiGetString (
CallbackInfo->RegisteredHandle,
STRING_TOKEN (STR_IP6_CONFIG_FORM_HELP),
NULL)
;
UnicodeSPrint (MenuString, 128, L"%s (MAC:%s)", OldMenuString, MacString);
HiiSetString (
CallbackInfo->RegisteredHandle,
STRING_TOKEN (STR_IP6_CONFIG_FORM_HELP),
MenuString,
NULL
);
UnicodeSPrint (PortString, 128, L"MAC:%s", MacString);
HiiSetString (
CallbackInfo->RegisteredHandle,
STRING_TOKEN (STR_IP6_DEVICE_FORM_HELP),
PortString,
NULL
);
FreePool (MacString);
FreePool (OldMenuString);
InitializeListHead (&Instance->Ip6NvData.ManualAddress);
InitializeListHead (&Instance->Ip6NvData.GatewayAddress);
InitializeListHead (&Instance->Ip6NvData.DnsAddress);
return EFI_SUCCESS;
}
Error:
Ip6ConfigFormUnload (Instance);
return Status;
}
/**
Uninstall the HII Config Access protocol for network devices and free up the resources.
@param[in, out] Instance The IP6_CONFIG_INSTANCE to unload a form.
**/
VOID
Ip6ConfigFormUnload (
IN OUT IP6_CONFIG_INSTANCE *Instance
)
{
IP6_SERVICE *IpSb;
IP6_FORM_CALLBACK_INFO *CallbackInfo;
IP6_CONFIG_NVDATA *Ip6NvData;
IpSb = IP6_SERVICE_FROM_IP6_CONFIG_INSTANCE (Instance);
ASSERT (IpSb != NULL);
CallbackInfo = &Instance->CallbackInfo;
if (CallbackInfo->ChildHandle != NULL) {
//
// Close the child handle
//
gBS->CloseProtocol (
IpSb->Controller,
&gEfiManagedNetworkServiceBindingProtocolGuid,
IpSb->Image,
CallbackInfo->ChildHandle
);
//
// Uninstall EFI_HII_CONFIG_ACCESS_PROTOCOL
//
gBS->UninstallMultipleProtocolInterfaces (
CallbackInfo->ChildHandle,
&gEfiDevicePathProtocolGuid,
CallbackInfo->HiiVendorDevicePath,
&gEfiHiiConfigAccessProtocolGuid,
&CallbackInfo->HiiConfigAccess,
NULL
);
}
if (CallbackInfo->HiiVendorDevicePath != NULL) {
FreePool (CallbackInfo->HiiVendorDevicePath);
}
if (CallbackInfo->RegisteredHandle != NULL) {
//
// Remove HII package list
//
HiiRemovePackages (CallbackInfo->RegisteredHandle);
}
Ip6NvData = &Instance->Ip6NvData;
Ip6FreeAddressInfoList (&Ip6NvData->ManualAddress);
Ip6FreeAddressInfoList (&Ip6NvData->GatewayAddress);
Ip6FreeAddressInfoList (&Ip6NvData->DnsAddress);
Ip6NvData->ManualAddressCount = 0;
Ip6NvData->GatewayAddressCount = 0;
Ip6NvData->DnsAddressCount = 0;
}