C++程序  |  416行  |  11.22 KB

/*++

Copyright (c)  1999  - 2014, Intel Corporation. All rights reserved

  This program and the accompanying materials are licensed and made available under
  the terms and conditions of the BSD License that accompanies this distribution.
  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php.

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.


--*/


/*++
Module Name:

  SdHostIo.h

Abstract:

  Interface definition for EFI_SD_HOST_IO_PROTOCOL

--*/

#ifndef _SD_HOST_IO_H
#define _SD_HOST_IO_H


// Global ID for the EFI_SD_HOST_IO_PROTOCOL
// {B63F8EC7-A9C9-4472-A4C0-4D8BF365CC51}
//
#define EFI_SD_HOST_IO_PROTOCOL_GUID \
  { 0xb63f8ec7, 0xa9c9, 0x4472, { 0xa4, 0xc0, 0x4d, 0x8b, 0xf3, 0x65, 0xcc, 0x51 } }

typedef struct _EFI_SD_HOST_IO_PROTOCOL EFI_SD_HOST_IO_PROTOCOL;

//
// TODO: Move to Pci22.h
//
#define PCI_SUBCLASS_SD_HOST_CONTROLLER   0x05
#define PCI_IF_STANDARD_HOST_NO_DMA       0x00
#define PCI_IF_STANDARD_HOST_SUPPORT_DMA  0x01

//
// TODO: Retire
//
#define EFI_SD_HOST_IO_PROTOCOL_REVISION_01          0x01

//
// TODO: Do these belong in an Industry Standard include file?
//
// MMIO Registers definition for MMC/SDIO controller
//
#define  MMIO_DMAADR                     0x00
#define  MMIO_BLKSZ                      0x04
#define  MMIO_BLKCNT                     0x06
#define  MMIO_CMDARG                     0x08
#define  MMIO_XFRMODE                    0x0C
#define  MMIO_SDCMD                      0x0E
#define  MMIO_RESP                       0x10
#define  MMIO_BUFDATA                    0x20
#define  MMIO_PSTATE                     0x24
#define  MMIO_HOSTCTL                    0x28
#define  MMIO_PWRCTL                     0x29
#define  MMIO_BLKGAPCTL                  0x2A
#define  MMIO_WAKECTL                    0x2B
#define  MMIO_CLKCTL                     0x2C
#define  MMIO_TOCTL                      0x2E
#define  MMIO_SWRST                      0x2F
#define  MMIO_NINTSTS                    0x30
#define  MMIO_ERINTSTS                   0x32
#define  MMIO_NINTEN                     0x34
#define  MMIO_ERINTEN                    0x36
#define  MMIO_NINTSIGEN                  0x38
#define  MMIO_ERINTSIGEN                 0x3A
#define  MMIO_AC12ERRSTS                 0x3C
#define  MMIO_HOST_CTL2                  0x3E //hphang <- New in VLV2
#define  MMIO_CAP                        0x40
#define  MMIO_CAP2                       0x44 //hphang <- New in VLV2
#define  MMIO_MCCAP                      0x48
#define  MMIO_FORCEEVENTCMD12ERRSTAT     0x50 //hphang <- New in VLV2
#define  MMIO_FORCEEVENTERRINTSTAT       0x52 //hphang <- New in VLV2
#define  MMIO_ADMAERRSTAT                0x54 //hphang <- New in VLV2
#define  MMIO_ADMASYSADDR                0x58 //hphang <- New in VLV2
#define  MMIO_PRESETVALUE0               0x60 //hphang <- New in VLV2
#define  MMIO_PRESETVALUE1               0x64 //hphang <- New in VLV2
#define  MMIO_PRESETVALUE2               0x68 //hphang <- New in VLV2
#define  MMIO_PRESETVALUE3               0x6C //hphang <- New in VLV2
#define  MMIO_BOOTTIMEOUTCTRL            0x70 //hphang <- New in VLV2
#define  MMIO_DEBUGSEL                   0x74 //hphang <- New in VLV2
#define  MMIO_SHAREDBUS                  0xE0 //hphang <- New in VLV2
#define  MMIO_SPIINTSUP                  0xF0 //hphang <- New in VLV2
#define  MMIO_SLTINTSTS                  0xFC
#define  MMIO_CTRLRVER                   0xFE

typedef enum {
  ResponseNo = 0,
  ResponseR1,
  ResponseR1b,
  ResponseR2,
  ResponseR3,
  ResponseR4,
  ResponseR5,
  ResponseR5b,
  ResponseR6,
  ResponseR7
} RESPONSE_TYPE;

typedef enum {
  NoData = 0,
  InData,
  OutData
} TRANSFER_TYPE;

typedef enum {
  Reset_Auto = 0,
  Reset_DAT,
  Reset_CMD,
  Reset_DAT_CMD,
  Reset_All,
  Reset_HW
} RESET_TYPE;


typedef enum {
  SDMA = 0,
  ADMA2,
  PIO
} DMA_MOD;

typedef struct {
  UINT32  HighSpeedSupport:    1;  //High speed supported
  UINT32  V18Support:          1;  //1.8V supported
  UINT32  V30Support:          1;  //3.0V supported
  UINT32  V33Support:          1;  //3.3V supported
  UINT32  SDR50Support:        1;
  UINT32  SDR104Support:       1;
  UINT32  DDR50Support:        1;
  UINT32  Reserved0:           1;
  UINT32  BusWidth4:           1;  // 4 bit width
  UINT32  BusWidth8:           1;  // 8 bit width
  UINT32  Reserved1:           6;
  UINT32  SDMASupport:         1;
  UINT32  ADMA2Support:        1;
  UINT32  DmaMode:             2;
  UINT32  ReTuneTimer:         4;
  UINT32  ReTuneMode:          2;
  UINT32  Reserved2:           6;
  UINT32  BoundarySize;
} HOST_CAPABILITY;

/*++

  Routine Description:
    The main function used to send the command to the card inserted into the SD host
    slot.
    It will assemble the arguments to set the command register and wait for the command
    and transfer completed until timeout. Then it will read the response register to fill
    the ResponseData

  Arguments:
    This           - Pointer to EFI_SD_HOST_IO_PROTOCOL
    CommandIndex   - The command index to set the command index field of command register
    Argument       - Command argument to set the argument field of command register
    DataType       - TRANSFER_TYPE, indicates no data, data in or data out
    Buffer         - Contains the data read from / write to the device
    BufferSize     - The size of the buffer
    ResponseType   - RESPONSE_TYPE
    TimeOut        - Time out value in 1 ms unit
    ResponseData   - Depending on the ResponseType, such as CSD or card status

  Returns:
    EFI_SUCCESS
    EFI_INVALID_PARAMETER
    EFI_OUT_OF_RESOURCES
    EFI_TIMEOUT
    EFI_DEVICE_ERROR

--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SEND_COMMAND) (
  IN   EFI_SD_HOST_IO_PROTOCOL    *This,
  IN   UINT16                     CommandIndex,
  IN   UINT32                     Argument,
  IN   TRANSFER_TYPE              DataType,
  IN   UINT8                      *Buffer, OPTIONAL
  IN   UINT32                     BufferSize,
  IN   RESPONSE_TYPE              ResponseType,
  IN   UINT32                     TimeOut,
  OUT  UINT32                     *ResponseData OPTIONAL
  );

/*++

  Routine Description:
    Set max clock frequency of the host, the actual frequency
    may not be the same as MaxFrequency. It depends on
    the max frequency the host can support, divider, and host
    speed mode.

  Arguments:
    This           - Pointer to EFI_SD_HOST_IO_PROTOCOL
    MaxFrequency   - Max frequency in HZ

  Returns:
    EFI_SUCCESS
    EFI_TIMEOUT
--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_CLOCK_FREQUENCY) (
  IN  EFI_SD_HOST_IO_PROTOCOL    *This,
  IN  UINT32                     MaxFrequency
  );

/*++

  Routine Description:
    Set bus width of the host

  Arguments:
    This       - Pointer to EFI_SD_HOST_IO_PROTOCOL
    BusWidth   - Bus width in 1, 4, 8 bits

  Returns:
    EFI_SUCCESS
    EFI_INVALID_PARAMETER

--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_BUS_WIDTH) (
  IN  EFI_SD_HOST_IO_PROTOCOL    *This,
  IN  UINT32                     BusWidth
  );

/*++

  Routine Description:
    Set voltage which could supported by the host.
    Support 0(Power off the host), 1.8V, 3.0V, 3.3V
  Arguments:
    This      - Pointer to EFI_SD_HOST_IO_PROTOCOL
    Voltage   - Units in 0.1 V

  Returns:
    EFI_SUCCESS
    EFI_INVALID_PARAMETER

--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_HOST_VOLTAGE) (
  IN  EFI_SD_HOST_IO_PROTOCOL    *This,
  IN  UINT32                     Voltage
  );

/*++

  Routine Description:
    Set Host High Speed
  Arguments:
    This      - Pointer to EFI_SD_HOST_IO_PROTOCOL
    HighSpeed   - True for High Speed Mode set, false for normal mode

  Returns:
    EFI_SUCCESS
    EFI_INVALID_PARAMETER

--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_HOST_SPEED_MODE) (
  IN  EFI_SD_HOST_IO_PROTOCOL    *This,
  IN  UINT32                     HighSpeed
  );

/*++

  Routine Description:
    Set High Speed Mode
  Arguments:
    This      - Pointer to EFI_SD_HOST_IO_PROTOCOL
    SetHostDdrMode   - True for DDR Mode set, false for normal mode

  Returns:
    EFI_SUCCESS
    EFI_INVALID_PARAMETER

--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_HOST_DDR_MODE) (
  IN  EFI_SD_HOST_IO_PROTOCOL    *This,
  IN  UINT32                     DdrMode
  );


/*++

  Routine Description:
   Reset the host

  Arguments:
    This      - Pointer to EFI_SD_HOST_IO_PROTOCOL
    ResetAll  - TRUE to reset all

  Returns:
    EFI_SUCCESS
    EFI_TIMEOUT

--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_RESET_SD_HOST) (
  IN  EFI_SD_HOST_IO_PROTOCOL    *This,
  IN  RESET_TYPE                 ResetType
  );

/*++

  Routine Description:
   Reset the host

  Arguments:
    This    - Pointer to EFI_SD_HOST_IO_PROTOCOL
    Enable  - TRUE to enable, FALSE to disable

  Returns:
    EFI_SUCCESS
    EFI_TIMEOUT

--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_ENABLE_AUTO_STOP_CMD) (
  IN  EFI_SD_HOST_IO_PROTOCOL    *This,
  IN  BOOLEAN                    Enable
  );

/*++

  Routine Description:
    Find whether these is a card inserted into the slot. If so
    init the host. If not, return EFI_NOT_FOUND.

  Arguments:
    This      - Pointer to EFI_SD_HOST_IO_PROTOCOL

  Returns:
    EFI_SUCCESS
    EFI_NOT_FOUND

--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_DETECT_CARD_AND_INIT_HOST) (
  IN  EFI_SD_HOST_IO_PROTOCOL    *This
  );

/*++

  Routine Description:
   Set the Block length

  Arguments:
    This        - Pointer to EFI_SD_HOST_IO_PROTOCOL
    BlockLength - card supportes block length

  Returns:
    EFI_SUCCESS
    EFI_TIMEOUT

--*/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_BLOCK_LENGTH) (
  IN  EFI_SD_HOST_IO_PROTOCOL    *This,
  IN  UINT32                     BlockLength
  );

typedef EFI_STATUS
(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SETUP_DEVICE)(
  IN  EFI_SD_HOST_IO_PROTOCOL    *This
  );



//
// Interface structure for the EFI SD Host I/O Protocol
//
struct _EFI_SD_HOST_IO_PROTOCOL {
  UINT32                                             Revision;
  HOST_CAPABILITY                                    HostCapability;
  EFI_SD_HOST_IO_PROTOCOL_SEND_COMMAND               SendCommand;
  EFI_SD_HOST_IO_PROTOCOL_SET_CLOCK_FREQUENCY        SetClockFrequency;
  EFI_SD_HOST_IO_PROTOCOL_SET_BUS_WIDTH              SetBusWidth;
  EFI_SD_HOST_IO_PROTOCOL_SET_HOST_VOLTAGE           SetHostVoltage;
  EFI_SD_HOST_IO_PROTOCOL_SET_HOST_DDR_MODE          SetHostDdrMode;
  EFI_SD_HOST_IO_PROTOCOL_RESET_SD_HOST              ResetSdHost;
  EFI_SD_HOST_IO_PROTOCOL_ENABLE_AUTO_STOP_CMD       EnableAutoStopCmd;
  EFI_SD_HOST_IO_PROTOCOL_DETECT_CARD_AND_INIT_HOST  DetectCardAndInitHost;
  EFI_SD_HOST_IO_PROTOCOL_SET_BLOCK_LENGTH           SetBlockLength;
  EFI_SD_HOST_IO_PROTOCOL_SETUP_DEVICE               SetupDevice;
  EFI_SD_HOST_IO_PROTOCOL_SET_HOST_SPEED_MODE        SetHostSpeedMode;
};

extern EFI_GUID gEfiSdHostIoProtocolGuid;

#endif