/*
* Copyright (c) 2009-2011 Intel Corporation. All rights reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef VIDEO_DECODER_DEFS_H_
#define VIDEO_DECODER_DEFS_H_
#include <va/va.h>
#include <stdint.h>
// format specific data, for future extension.
struct VideoExtensionBuffer {
int32_t extType;
int32_t extSize;
uint8_t *extData;
};
typedef enum {
PACKED_FRAME_TYPE,
} VIDEO_EXTENSION_TYPE;
struct VideoFrameRawData {
int32_t width;
int32_t height;
int32_t pitch[3];
int32_t offset[3];
uint32_t fourcc; //NV12
int32_t size;
uint8_t *data;
bool own; // own data or derived from surface. If true, the library will release the memory during clearnup
};
struct PackedFrameData {
int64_t timestamp;
int32_t offSet;
};
// flags for VideoDecodeBuffer, VideoConfigBuffer and VideoRenderBuffer
typedef enum {
// indicates if sample has discontinuity in time stamp (happen after seeking usually)
HAS_DISCONTINUITY = 0x01,
// indicates wheter the sample contains a complete frame or end of frame.
HAS_COMPLETE_FRAME = 0x02,
// indicate whether surfaceNumber field in the VideoConfigBuffer is valid
HAS_SURFACE_NUMBER = 0x04,
// indicate whether profile field in the VideoConfigBuffer is valid
HAS_VA_PROFILE = 0x08,
// indicate whether output order will be the same as decoder order
WANT_LOW_DELAY = 0x10, // make display order same as decoding order
// indicates whether error concealment algorithm should be enabled to automatically conceal error.
WANT_ERROR_CONCEALMENT = 0x20,
// indicate wheter raw data should be output.
WANT_RAW_OUTPUT = 0x40,
// indicate sample is decoded but should not be displayed.
WANT_DECODE_ONLY = 0x80,
// indicate surfaceNumber field is valid and it contains minimum surface number to allocate.
HAS_MINIMUM_SURFACE_NUMBER = 0x100,
// indicates surface created will be protected
WANT_SURFACE_PROTECTION = 0x400,
// indicates if extra data is appended at end of buffer
HAS_EXTRADATA = 0x800,
// indicates if buffer contains codec data
HAS_CODECDATA = 0x1000,
// indicate if it use graphic buffer.
USE_NATIVE_GRAPHIC_BUFFER = 0x2000,
// indicate whether it is a sync frame in container
IS_SYNC_FRAME = 0x4000,
// indicate whether video decoder buffer contains secure data
IS_SECURE_DATA = 0x8000,
// indicate it's the last output frame of the sequence
IS_EOS = 0x10000,
// indicate should allocate tiling surfaces
USE_TILING_MEMORY = 0x20000,
// indicate the frame has resolution change
IS_RESOLUTION_CHANGE = 0x40000,
// indicate whether video decoder buffer contains only one field
IS_SINGLE_FIELD = 0x80000,
// indicate adaptive playback mode
WANT_ADAPTIVE_PLAYBACK = 0x100000,
// indicate the modular drm type
IS_SUBSAMPLE_ENCRYPTION = 0x200000,
// indicate meta data mode
WANT_STORE_META_DATA = 0x400000,
} VIDEO_BUFFER_FLAG;
typedef enum
{
DecodeHeaderError = 0,
DecodeMBError = 1,
DecodeSliceMissing = 2,
DecodeRefMissing = 3,
} VideoDecodeErrorType;
#define MAX_ERR_NUM 10
struct VideoDecodeBuffer {
uint8_t *data;
int32_t size;
int64_t timeStamp;
uint32_t flag;
uint32_t rotationDegrees;
VideoExtensionBuffer *ext;
};
//#define MAX_GRAPHIC_BUFFER_NUM (16 + 1 + 11) // max DPB + 1 + AVC_EXTRA_NUM
#define MAX_GRAPHIC_BUFFER_NUM 64 // extended for VPP
struct VideoConfigBuffer {
uint8_t *data;
int32_t size;
int32_t width;
int32_t height;
uint32_t surfaceNumber;
VAProfile profile;
uint32_t flag;
void *graphicBufferHandler[MAX_GRAPHIC_BUFFER_NUM];
uint32_t graphicBufferHStride;
uint32_t graphicBufferVStride;
uint32_t graphicBufferColorFormat;
uint32_t graphicBufferWidth;
uint32_t graphicBufferHeight;
VideoExtensionBuffer *ext;
void* nativeWindow;
uint32_t rotationDegrees;
#ifdef TARGET_HAS_ISV
uint32_t vppBufferNum;
#endif
};
struct VideoErrorInfo {
VideoDecodeErrorType type;
uint32_t num_mbs;
union {
struct {uint32_t start_mb; uint32_t end_mb;} mb_pos;
} error_data;
};
struct VideoErrorBuffer {
uint32_t errorNumber; // Error number should be no more than MAX_ERR_NUM
int64_t timeStamp; // presentation time stamp
VideoErrorInfo errorArray[MAX_ERR_NUM];
};
struct VideoRenderBuffer {
VASurfaceID surface;
VADisplay display;
int32_t scanFormat; //progressive, top-field first, or bottom-field first
int64_t timeStamp; // presentation time stamp
mutable volatile bool renderDone; // indicated whether frame is rendered, this must be set to false by the client of this library once
// surface is rendered. Not setting this flag will lead to DECODE_NO_SURFACE error.
void * graphicBufferHandle;
int32_t graphicBufferIndex; //the index in graphichandle array
uint32_t flag;
mutable volatile bool driverRenderDone;
VideoFrameRawData *rawData;
VideoErrorBuffer errBuf;
};
struct VideoSurfaceBuffer {
VideoRenderBuffer renderBuffer;
int32_t pictureOrder; // picture order count, valid only for AVC format
bool referenceFrame; // indicated whether frame associated with this surface is a reference I/P frame
bool asReferernce; // indicated wheter frame is used as reference (as a result surface can not be used for decoding)
VideoFrameRawData *mappedData;
VideoSurfaceBuffer *next;
};
struct VideoFormatInfo {
bool valid; // indicates whether format info is valid. MimeType is always valid.
char *mimeType;
uint32_t width;
uint32_t height;
uint32_t surfaceWidth;
uint32_t surfaceHeight;
uint32_t surfaceNumber;
VASurfaceID *ctxSurfaces;
int32_t aspectX;
int32_t aspectY;
int32_t cropLeft;
int32_t cropRight;
int32_t cropTop;
int32_t cropBottom;
int32_t colorMatrix;
int32_t videoRange;
int32_t bitrate;
int32_t framerateNom;
int32_t framerateDenom;
uint32_t actualBufferNeeded;
int32_t flags; // indicate whether current picture is field or frame
VideoExtensionBuffer *ext;
};
// TODO: categorize the follow errors as fatal and non-fatal.
typedef enum {
DECODE_NOT_STARTED = -10,
DECODE_NEED_RESTART = -9,
DECODE_NO_CONFIG = -8,
DECODE_NO_SURFACE = -7,
DECODE_NO_REFERENCE = -6,
DECODE_NO_PARSER = -5,
DECODE_INVALID_DATA = -4,
DECODE_DRIVER_FAIL = -3,
DECODE_PARSER_FAIL = -2,
DECODE_MEMORY_FAIL = -1,
DECODE_FAIL = 0,
DECODE_SUCCESS = 1,
DECODE_FORMAT_CHANGE = 2,
DECODE_FRAME_DROPPED = 3,
DECODE_MULTIPLE_FRAME = 4,
} VIDEO_DECODE_STATUS;
typedef int32_t Decode_Status;
#ifndef NULL
#define NULL 0
#endif
inline bool checkFatalDecoderError(Decode_Status status) {
if (status == DECODE_NOT_STARTED ||
status == DECODE_NEED_RESTART ||
status == DECODE_NO_PARSER ||
status == DECODE_INVALID_DATA ||
status == DECODE_MEMORY_FAIL ||
status == DECODE_FAIL) {
return true;
} else {
return false;
}
}
#endif // VIDEO_DECODER_DEFS_H_