/*
* Copyright (C) 2010-2014 NXP Semiconductors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* OSAL Implementation for Timers.
*/
#include <phNfcCommon.h>
#include <phNfcTypes.h>
#include <phNxpLog.h>
#include <phNxpNciHal.h>
#include <phOsalNfc_Timer.h>
#include <signal.h>
#define PH_NFC_MAX_TIMER (5U)
static phOsalNfc_TimerHandle_t apTimerInfo[PH_NFC_MAX_TIMER];
extern phNxpNciHal_Control_t nxpncihal_ctrl;
/*
* Defines the base address for generating timerid.
*/
#define PH_NFC_TIMER_BASE_ADDRESS (100U)
/*
* Defines the value for invalid timerid returned during timeSetEvent
*/
#define PH_NFC_TIMER_ID_ZERO (0x00)
/*
* Invalid timer ID type. This ID used indicate timer creation is failed */
#define PH_NFC_TIMER_ID_INVALID (0xFFFF)
/* Forward declarations */
static void phOsalNfc_PostTimerMsg(phLibNfc_Message_t* pMsg);
static void phOsalNfc_DeferredCall(void* pParams);
static void phOsalNfc_Timer_Expired(union sigval sv);
/*
*************************** Function Definitions ******************************
*/
/*******************************************************************************
**
** Function phOsalNfc_Timer_Create
**
** Description Creates a timer which shall call back the specified function
** when the timer expires. Fails if OSAL module is not
** initialized or timers are already occupied
**
** Parameters None
**
** Returns TimerId
** TimerId value of PH_OSALNFC_TIMER_ID_INVALID indicates that
** timer is not created
**
*******************************************************************************/
uint32_t phOsalNfc_Timer_Create(void) {
/* dwTimerId is also used as an index at which timer object can be stored */
uint32_t dwTimerId = PH_OSALNFC_TIMER_ID_INVALID;
static struct sigevent se;
phOsalNfc_TimerHandle_t* pTimerHandle;
/* Timer needs to be initialized for timer usage */
se.sigev_notify = SIGEV_THREAD;
se.sigev_notify_function = phOsalNfc_Timer_Expired;
se.sigev_notify_attributes = NULL;
dwTimerId = phUtilNfc_CheckForAvailableTimer();
/* Check whether timers are available, if yes create a timer handle structure
*/
if ((PH_NFC_TIMER_ID_ZERO != dwTimerId) && (dwTimerId <= PH_NFC_MAX_TIMER)) {
pTimerHandle = (phOsalNfc_TimerHandle_t*)&apTimerInfo[dwTimerId - 1];
/* Build the Timer Id to be returned to Caller Function */
dwTimerId += PH_NFC_TIMER_BASE_ADDRESS;
se.sigev_value.sival_int = (int)dwTimerId;
/* Create POSIX timer */
if (timer_create(CLOCK_REALTIME, &se, &(pTimerHandle->hTimerHandle)) ==
-1) {
dwTimerId = PH_NFC_TIMER_ID_INVALID;
} else {
/* Set the state to indicate timer is ready */
pTimerHandle->eState = eTimerIdle;
/* Store the Timer Id which shall act as flag during check for timer
* availability */
pTimerHandle->TimerId = dwTimerId;
}
} else {
dwTimerId = PH_NFC_TIMER_ID_INVALID;
}
/* Timer ID invalid can be due to Uninitialized state,Non availability of
* Timer */
return dwTimerId;
}
/*******************************************************************************
**
** Function phOsalNfc_Timer_Start
**
** Description Starts the requested, already created, timer.
** If the timer is already running, timer stops and restarts
** with the new timeout value and new callback function in case
** any ??????
** Creates a timer which shall call back the specified function
** when the timer expires
**
** Parameters dwTimerId - valid timer ID obtained during timer creation
** dwRegTimeCnt - requested timeout in milliseconds
** pApplication_callback - application callback interface to be
** called when timer expires
** pContext - caller context, to be passed to the application
** callback function
**
** Returns NFC status:
** NFCSTATUS_SUCCESS - the operation was successful
** NFCSTATUS_NOT_INITIALISED - OSAL Module is not initialized
** NFCSTATUS_INVALID_PARAMETER - invalid parameter passed to
** the function
** PH_OSALNFC_TIMER_START_ERROR - timer could not be created
** due to system error
**
*******************************************************************************/
NFCSTATUS phOsalNfc_Timer_Start(uint32_t dwTimerId, uint32_t dwRegTimeCnt,
pphOsalNfc_TimerCallbck_t pApplication_callback,
void* pContext) {
NFCSTATUS wStartStatus = NFCSTATUS_SUCCESS;
struct itimerspec its;
uint32_t dwIndex;
phOsalNfc_TimerHandle_t* pTimerHandle;
/* Retrieve the index at which the timer handle structure is stored */
dwIndex = dwTimerId - PH_NFC_TIMER_BASE_ADDRESS - 0x01;
pTimerHandle = (phOsalNfc_TimerHandle_t*)&apTimerInfo[dwIndex];
/* OSAL Module needs to be initialized for timer usage */
/* Check whether the handle provided by user is valid */
if ((dwIndex < PH_NFC_MAX_TIMER) && (0x00 != pTimerHandle->TimerId) &&
(NULL != pApplication_callback)) {
its.it_interval.tv_sec = 0;
its.it_interval.tv_nsec = 0;
its.it_value.tv_sec = dwRegTimeCnt / 1000;
its.it_value.tv_nsec = 1000000 * (dwRegTimeCnt % 1000);
if (its.it_value.tv_sec == 0 && its.it_value.tv_nsec == 0) {
/* This would inadvertently stop the timer*/
its.it_value.tv_nsec = 1;
}
pTimerHandle->Application_callback = pApplication_callback;
pTimerHandle->pContext = pContext;
pTimerHandle->eState = eTimerRunning;
/* Arm the timer */
if ((timer_settime(pTimerHandle->hTimerHandle, 0, &its, NULL)) == -1) {
wStartStatus = PHNFCSTVAL(CID_NFC_OSAL, PH_OSALNFC_TIMER_START_ERROR);
}
} else {
wStartStatus = PHNFCSTVAL(CID_NFC_OSAL, NFCSTATUS_INVALID_PARAMETER);
}
return wStartStatus;
}
/*******************************************************************************
**
** Function phOsalNfc_Timer_Stop
**
** Description Stops already started timer
** Allows to stop running timer. In case timer is stopped,
** timer callback will not be notified any more
**
** Parameters dwTimerId - valid timer ID obtained during timer creation
**
** Returns NFC status:
** NFCSTATUS_SUCCESS - the operation was successful
** NFCSTATUS_NOT_INITIALISED - OSAL Module is not initialized
** NFCSTATUS_INVALID_PARAMETER - invalid parameter passed to
** the function
** PH_OSALNFC_TIMER_STOP_ERROR - timer could not be stopped due
** to system error
**
*******************************************************************************/
NFCSTATUS phOsalNfc_Timer_Stop(uint32_t dwTimerId) {
NFCSTATUS wStopStatus = NFCSTATUS_SUCCESS;
static struct itimerspec its = {{0, 0}, {0, 0}};
uint32_t dwIndex;
phOsalNfc_TimerHandle_t* pTimerHandle;
dwIndex = dwTimerId - PH_NFC_TIMER_BASE_ADDRESS - 0x01;
pTimerHandle = (phOsalNfc_TimerHandle_t*)&apTimerInfo[dwIndex];
/* OSAL Module and Timer needs to be initialized for timer usage */
/* Check whether the TimerId provided by user is valid */
if ((dwIndex < PH_NFC_MAX_TIMER) && (0x00 != pTimerHandle->TimerId) &&
(pTimerHandle->eState != eTimerIdle)) {
/* Stop the timer only if the callback has not been invoked */
if (pTimerHandle->eState == eTimerRunning) {
if ((timer_settime(pTimerHandle->hTimerHandle, 0, &its, NULL)) == -1) {
wStopStatus = PHNFCSTVAL(CID_NFC_OSAL, PH_OSALNFC_TIMER_STOP_ERROR);
} else {
/* Change the state of timer to Stopped */
pTimerHandle->eState = eTimerStopped;
}
}
} else {
wStopStatus = PHNFCSTVAL(CID_NFC_OSAL, NFCSTATUS_INVALID_PARAMETER);
}
return wStopStatus;
}
/*******************************************************************************
**
** Function phOsalNfc_Timer_Delete
**
** Description Deletes previously created timer
** Allows to delete previously created timer. In case timer is
** running, it is first stopped and then deleted
**
** Parameters dwTimerId - valid timer ID obtained during timer creation
**
** Returns NFC status:
** NFCSTATUS_SUCCESS - the operation was successful
** NFCSTATUS_NOT_INITIALISED - OSAL Module is not initialized
** NFCSTATUS_INVALID_PARAMETER - invalid parameter passed to
** the function
** PH_OSALNFC_TIMER_DELETE_ERROR - timer could not be stopped
** due to system error
**
*******************************************************************************/
NFCSTATUS phOsalNfc_Timer_Delete(uint32_t dwTimerId) {
NFCSTATUS wDeleteStatus = NFCSTATUS_SUCCESS;
uint32_t dwIndex;
phOsalNfc_TimerHandle_t* pTimerHandle;
dwIndex = dwTimerId - PH_NFC_TIMER_BASE_ADDRESS - 0x01;
pTimerHandle = (phOsalNfc_TimerHandle_t*)&apTimerInfo[dwIndex];
/* OSAL Module and Timer needs to be initialized for timer usage */
/* Check whether the TimerId passed by user is valid and Deregistering of
* timer is successful */
if ((dwIndex < PH_NFC_MAX_TIMER) && (0x00 != pTimerHandle->TimerId) &&
(NFCSTATUS_SUCCESS == phOsalNfc_CheckTimerPresence(pTimerHandle))) {
/* Cancel the timer before deleting */
if (timer_delete(pTimerHandle->hTimerHandle) == -1) {
wDeleteStatus = PHNFCSTVAL(CID_NFC_OSAL, PH_OSALNFC_TIMER_DELETE_ERROR);
}
/* Clear Timer structure used to store timer related data */
memset(pTimerHandle, (uint8_t)0x00, sizeof(phOsalNfc_TimerHandle_t));
} else {
wDeleteStatus = PHNFCSTVAL(CID_NFC_OSAL, NFCSTATUS_INVALID_PARAMETER);
}
return wDeleteStatus;
}
/*******************************************************************************
**
** Function phOsalNfc_Timer_Cleanup
**
** Description Deletes all previously created timers
** Allows to delete previously created timers. In case timer is
** running, it is first stopped and then deleted
**
** Parameters None
**
** Returns None
**
*******************************************************************************/
void phOsalNfc_Timer_Cleanup(void) {
/* Delete all timers */
uint32_t dwIndex;
phOsalNfc_TimerHandle_t* pTimerHandle;
for (dwIndex = 0; dwIndex < PH_NFC_MAX_TIMER; dwIndex++) {
pTimerHandle = (phOsalNfc_TimerHandle_t*)&apTimerInfo[dwIndex];
/* OSAL Module and Timer needs to be initialized for timer usage */
/* Check whether the TimerId passed by user is valid and Deregistering of
* timer is successful */
if ((0x00 != pTimerHandle->TimerId) &&
(NFCSTATUS_SUCCESS == phOsalNfc_CheckTimerPresence(pTimerHandle))) {
/* Cancel the timer before deleting */
if (timer_delete(pTimerHandle->hTimerHandle) == -1) {
NXPLOG_TML_E("timer %d delete error!", dwIndex);
}
/* Clear Timer structure used to store timer related data */
memset(pTimerHandle, (uint8_t)0x00, sizeof(phOsalNfc_TimerHandle_t));
}
}
return;
}
/*******************************************************************************
**
** Function phOsalNfc_DeferredCall
**
** Description Invokes the timer callback function after timer expiration.
** Shall invoke the callback function registered by the timer
** caller function
**
** Parameters pParams - parameters indicating the ID of the timer
**
** Returns None -
**
*******************************************************************************/
static void phOsalNfc_DeferredCall(void* pParams) {
/* Retrieve the timer id from the parameter */
uint32_t dwIndex;
phOsalNfc_TimerHandle_t* pTimerHandle;
if (NULL != pParams) {
/* Retrieve the index at which the timer handle structure is stored */
dwIndex = (uintptr_t)pParams - PH_NFC_TIMER_BASE_ADDRESS - 0x01;
pTimerHandle = (phOsalNfc_TimerHandle_t*)&apTimerInfo[dwIndex];
if (pTimerHandle->Application_callback != NULL) {
/* Invoke the callback function with osal Timer ID */
pTimerHandle->Application_callback((uintptr_t)pParams,
pTimerHandle->pContext);
}
}
return;
}
/*******************************************************************************
**
** Function phOsalNfc_PostTimerMsg
**
** Description Posts message on the user thread
** Shall be invoked upon expiration of a timer
** Shall post message on user thread through which timer
** callback function shall be invoked
**
** Parameters pMsg - pointer to the message structure posted on user
** thread
**
** Returns None
**
*******************************************************************************/
static void phOsalNfc_PostTimerMsg(phLibNfc_Message_t* pMsg) {
(void)phDal4Nfc_msgsnd(
nxpncihal_ctrl.gDrvCfg
.nClientId /*gpphOsalNfc_Context->dwCallbackThreadID*/,
pMsg, 0);
return;
}
/*******************************************************************************
**
** Function phOsalNfc_Timer_Expired
**
** Description posts message upon expiration of timer
** Shall be invoked when any one timer is expired
** Shall post message on user thread to invoke respective
** callback function provided by the caller of Timer function
**
** Returns None
**
*******************************************************************************/
static void phOsalNfc_Timer_Expired(union sigval sv) {
uint32_t dwIndex;
phOsalNfc_TimerHandle_t* pTimerHandle;
dwIndex = ((uint32_t)(sv.sival_int)) - PH_NFC_TIMER_BASE_ADDRESS - 0x01;
pTimerHandle = (phOsalNfc_TimerHandle_t*)&apTimerInfo[dwIndex];
/* Timer is stopped when callback function is invoked */
pTimerHandle->eState = eTimerStopped;
pTimerHandle->tDeferedCallInfo.pDeferedCall = &phOsalNfc_DeferredCall;
pTimerHandle->tDeferedCallInfo.pParam = (void*)((intptr_t)(sv.sival_int));
pTimerHandle->tOsalMessage.eMsgType = PH_LIBNFC_DEFERREDCALL_MSG;
pTimerHandle->tOsalMessage.pMsgData = (void*)&pTimerHandle->tDeferedCallInfo;
/* Post a message on the queue to invoke the function */
phOsalNfc_PostTimerMsg((phLibNfc_Message_t*)&pTimerHandle->tOsalMessage);
return;
}
/*******************************************************************************
**
** Function phUtilNfc_CheckForAvailableTimer
**
** Description Find an available timer id
**
** Parameters void
**
** Returns Available timer id
**
*******************************************************************************/
uint32_t phUtilNfc_CheckForAvailableTimer(void) {
/* Variable used to store the index at which the object structure details
can be stored. Initialize it as not available. */
uint32_t dwIndex = 0x00;
uint32_t dwRetval = 0x00;
/* Check whether Timer object can be created */
for (dwIndex = 0x00; ((dwIndex < PH_NFC_MAX_TIMER) && (0x00 == dwRetval));
dwIndex++) {
if (!(apTimerInfo[dwIndex].TimerId)) {
dwRetval = (dwIndex + 0x01);
}
}
return (dwRetval);
}
/*******************************************************************************
**
** Function phOsalNfc_CheckTimerPresence
**
** Description Checks the requested timer is present or not
**
** Parameters pObjectHandle - timer context
**
** Returns NFCSTATUS_SUCCESS if found
** Other value if not found
**
*******************************************************************************/
NFCSTATUS phOsalNfc_CheckTimerPresence(void* pObjectHandle) {
uint32_t dwIndex;
NFCSTATUS wRegisterStatus = NFCSTATUS_INVALID_PARAMETER;
for (dwIndex = 0x00;
((dwIndex < PH_NFC_MAX_TIMER) && (wRegisterStatus != NFCSTATUS_SUCCESS));
dwIndex++) {
/* For Timer, check whether the requested handle is present or not */
if (((&apTimerInfo[dwIndex]) == (phOsalNfc_TimerHandle_t*)pObjectHandle) &&
(apTimerInfo[dwIndex].TimerId)) {
wRegisterStatus = NFCSTATUS_SUCCESS;
}
}
return wRegisterStatus;
}