This file provides information on the module parameters of many of the Linux watchdog drivers. Watchdog driver parameter specs should be listed here unless the driver has its own driver-specific information file. See Documentation/kernel-parameters.txt for information on providing kernel parameters for builtin drivers versus loadable modules. ------------------------------------------------- acquirewdt: wdt_stop: Acquire WDT 'stop' io port (default 0x43) wdt_start: Acquire WDT 'start' io port (default 0x443) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- advantechwdt: wdt_stop: Advantech WDT 'stop' io port (default 0x443) wdt_start: Advantech WDT 'start' io port (default 0x443) timeout: Watchdog timeout in seconds. 1<= timeout <=63, default=60. nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- alim1535_wdt: timeout: Watchdog timeout in seconds. (0 < timeout < 18000, default=60 nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- alim7101_wdt: timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30 use_gpio: Use the gpio watchdog (required by old cobalt boards). default=0/off/no nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- ar7_wdt: margin: Watchdog margin in seconds (default=60) nowayout: Disable watchdog shutdown on close (default=kernel config parameter) ------------------------------------------------- at32ap700x_wdt: timeout: Timeout value. Limited to be 1 or 2 seconds. (default=2) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- at91rm9200_wdt: wdt_time: Watchdog time in seconds. (default=5) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- at91sam9_wdt: heartbeat: Watchdog heartbeats in seconds. (default = 15) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- bcm47xx_wdt: wdt_time: Watchdog time in seconds. (default=30) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- bfin_wdt: timeout: Watchdog timeout in seconds. (1<=timeout<=((2^32)/SCLK), default=20) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- coh901327_wdt: margin: Watchdog margin in seconds (default 60s) ------------------------------------------------- cpu5wdt: port: base address of watchdog card, default is 0x91 verbose: be verbose, default is 0 (no) ticks: count down ticks, default is 10000 ------------------------------------------------- cpwd: wd0_timeout: Default watchdog0 timeout in 1/10secs wd1_timeout: Default watchdog1 timeout in 1/10secs wd2_timeout: Default watchdog2 timeout in 1/10secs ------------------------------------------------- davinci_wdt: heartbeat: Watchdog heartbeat period in seconds from 1 to 600, default 60 ------------------------------------------------- ep93xx_wdt: nowayout: Watchdog cannot be stopped once started timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=TBD) ------------------------------------------------- eurotechwdt: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) io: Eurotech WDT io port (default=0x3f0) irq: Eurotech WDT irq (default=10) ev: Eurotech WDT event type (default is `int') ------------------------------------------------- gef_wdt: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- geodewdt: timeout: Watchdog timeout in seconds. 1<= timeout <=131, default=60. nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- i6300esb: heartbeat: Watchdog heartbeat in seconds. (1<heartbeat<2046, default=30) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- iTCO_wdt: heartbeat: Watchdog heartbeat in seconds. (2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- iTCO_vendor_support: vendorsupport: iTCO vendor specific support mode, default=0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+, 911=Broken SMI BIOS ------------------------------------------------- ib700wdt: timeout: Watchdog timeout in seconds. 0<= timeout <=30, default=30. nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- ibmasr: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- imx2_wdt: timeout: Watchdog timeout in seconds (default 60 s) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- indydog: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- iop_wdt: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- it8712f_wdt: margin: Watchdog margin in seconds (default 60) nowayout: Disable watchdog shutdown on close (default=kernel config parameter) ------------------------------------------------- it87_wdt: nogameport: Forbid the activation of game port, default=0 exclusive: Watchdog exclusive device open, default=1 timeout: Watchdog timeout in seconds, default=60 testmode: Watchdog test mode (1 = no reboot), default=0 nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- ixp2000_wdt: heartbeat: Watchdog heartbeat in seconds (default 60s) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- ixp4xx_wdt: heartbeat: Watchdog heartbeat in seconds (default 60s) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- ks8695_wdt: wdt_time: Watchdog time in seconds. (default=5) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- machzwd: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) action: after watchdog resets, generate: 0 = RESET(*) 1 = SMI 2 = NMI 3 = SCI ------------------------------------------------- max63xx_wdt: heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 60 nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) nodelay: Force selection of a timeout setting without initial delay (max6373/74 only, default=0) ------------------------------------------------- mixcomwd: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- mpc8xxx_wdt: timeout: Watchdog timeout in ticks. (0<timeout<65536, default=65535) reset: Watchdog Interrupt/Reset Mode. 0 = interrupt, 1 = reset nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- mpcore_wdt: mpcore_margin: MPcore timer margin in seconds. (0 < mpcore_margin < 65536, default=60) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) mpcore_noboot: MPcore watchdog action, set to 1 to ignore reboots, 0 to reboot (default=0 ------------------------------------------------- mv64x60_wdt: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- nuc900_wdt: heartbeat: Watchdog heartbeats in seconds. (default = 15) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- omap_wdt: timer_margin: initial watchdog timeout (in seconds) ------------------------------------------------- orion_wdt: heartbeat: Initial watchdog heartbeat in seconds nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- pc87413_wdt: io: pc87413 WDT I/O port (default: io). timeout: Watchdog timeout in minutes (default=timeout). nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- pika_wdt: heartbeat: Watchdog heartbeats in seconds. (default = 15) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- pnx4008_wdt: heartbeat: Watchdog heartbeat period in seconds from 1 to 60, default 19 nowayout: Set to 1 to keep watchdog running after device release ------------------------------------------------- pnx833x_wdt: timeout: Watchdog timeout in Mhz. (68Mhz clock), default=2040000000 (30 seconds) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) start_enabled: Watchdog is started on module insertion (default=1) ------------------------------------------------- rc32434_wdt: timeout: Watchdog timeout value, in seconds (default=20) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- riowd: riowd_timeout: Watchdog timeout in minutes (default=1) ------------------------------------------------- s3c2410_wdt: tmr_margin: Watchdog tmr_margin in seconds. (default=15) tmr_atboot: Watchdog is started at boot time if set to 1, default=0 nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) soft_noboot: Watchdog action, set to 1 to ignore reboots, 0 to reboot debug: Watchdog debug, set to >1 for debug, (default 0) ------------------------------------------------- sa1100_wdt: margin: Watchdog margin in seconds (default 60s) ------------------------------------------------- sb_wdog: timeout: Watchdog timeout in microseconds (max/default 8388607 or 8.3ish secs) ------------------------------------------------- sbc60xxwdt: wdt_stop: SBC60xx WDT 'stop' io port (default 0x45) wdt_start: SBC60xx WDT 'start' io port (default 0x443) timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- sbc7240_wdt: timeout: Watchdog timeout in seconds. (1<=timeout<=255, default=30) nowayout: Disable watchdog when closing device file ------------------------------------------------- sbc8360: timeout: Index into timeout table (0-63) (default=27 (60s)) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- sbc_epx_c3: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- sbc_fitpc2_wdt: margin: Watchdog margin in seconds (default 60s) nowayout: Watchdog cannot be stopped once started ------------------------------------------------- sc1200wdt: isapnp: When set to 0 driver ISA PnP support will be disabled (default=1) io: io port timeout: range is 0-255 minutes, default is 1 nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- sc520_wdt: timeout: Watchdog timeout in seconds. (1 <= timeout <= 3600, default=30) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- sch311x_wdt: force_id: Override the detected device ID therm_trip: Should a ThermTrip trigger the reset generator timeout: Watchdog timeout in seconds. 1<= timeout <=15300, default=60 nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- scx200_wdt: margin: Watchdog margin in seconds nowayout: Disable watchdog shutdown on close ------------------------------------------------- shwdt: clock_division_ratio: Clock division ratio. Valid ranges are from 0x5 (1.31ms) to 0x7 (5.25ms). (default=7) heartbeat: Watchdog heartbeat in seconds. (1 <= heartbeat <= 3600, default=30 nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- smsc37b787_wdt: timeout: range is 1-255 units, default is 60 nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- softdog: soft_margin: Watchdog soft_margin in seconds. (0 < soft_margin < 65536, default=60) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) soft_noboot: Softdog action, set to 1 to ignore reboots, 0 to reboot (default=0) ------------------------------------------------- stmp3xxx_wdt: heartbeat: Watchdog heartbeat period in seconds from 1 to 4194304, default 19 ------------------------------------------------- ts72xx_wdt: timeout: Watchdog timeout in seconds. (1 <= timeout <= 8, default=8) nowayout: Disable watchdog shutdown on close ------------------------------------------------- twl4030_wdt: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- txx9wdt: timeout: Watchdog timeout in seconds. (0<timeout<N, default=60) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- w83627hf_wdt: wdt_io: w83627hf/thf WDT io port (default 0x2E) timeout: Watchdog timeout in seconds. 1 <= timeout <= 255, default=60. nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- w83697hf_wdt: wdt_io: w83697hf/hg WDT io port (default 0x2e, 0 = autodetect) timeout: Watchdog timeout in seconds. 1<= timeout <=255 (default=60) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) early_disable: Watchdog gets disabled at boot time (default=1) ------------------------------------------------- w83697ug_wdt: wdt_io: w83697ug/uf WDT io port (default 0x2e) timeout: Watchdog timeout in seconds. 1<= timeout <=255 (default=60) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- w83877f_wdt: timeout: Watchdog timeout in seconds. (1<=timeout<=3600, default=30) nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- w83977f_wdt: timeout: Watchdog timeout in seconds (15..7635), default=45) testmode: Watchdog testmode (1 = no reboot), default=0 nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- wafer5823wdt: timeout: Watchdog timeout in seconds. 1 <= timeout <= 255, default=60. nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- wdt285: soft_margin: Watchdog timeout in seconds (default=60) ------------------------------------------------- wdt977: timeout: Watchdog timeout in seconds (60..15300, default=60) testmode: Watchdog testmode (1 = no reboot), default=0 nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- wm831x_wdt: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) ------------------------------------------------- wm8350_wdt: nowayout: Watchdog cannot be stopped once started (default=kernel config parameter) -------------------------------------------------