/* head-mmu-fr451.S: FR451 mmu-linux specific bits of initialisation * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #include <linux/init.h> #include <linux/threads.h> #include <linux/linkage.h> #include <asm/ptrace.h> #include <asm/page.h> #include <asm/mem-layout.h> #include <asm/spr-regs.h> #include <asm/mb86943a.h> #include "head.inc" #define __400_DBR0 0xfe000e00 #define __400_DBR1 0xfe000e08 #define __400_DBR2 0xfe000e10 #define __400_DBR3 0xfe000e18 #define __400_DAM0 0xfe000f00 #define __400_DAM1 0xfe000f08 #define __400_DAM2 0xfe000f10 #define __400_DAM3 0xfe000f18 #define __400_LGCR 0xfe000010 #define __400_LCR 0xfe000100 #define __400_LSBR 0xfe000c00 __INIT .balign 4 ############################################################################### # # describe the position and layout of the SDRAM controller registers # # ENTRY: EXIT: # GR5 - cacheline size # GR11 - displacement of 2nd SDRAM addr reg from GR14 # GR12 - displacement of 3rd SDRAM addr reg from GR14 # GR13 - displacement of 4th SDRAM addr reg from GR14 # GR14 - address of 1st SDRAM addr reg # GR15 - amount to shift address by to match SDRAM addr reg # GR26 &__head_reference [saved] # GR30 LED address [saved] # CC0 - T if DBR0 is present # CC1 - T if DBR1 is present # CC2 - T if DBR2 is present # CC3 - T if DBR3 is present # ############################################################################### .globl __head_fr451_describe_sdram __head_fr451_describe_sdram: sethi.p %hi(__400_DBR0),gr14 setlo %lo(__400_DBR0),gr14 setlos.p #__400_DBR1-__400_DBR0,gr11 setlos #__400_DBR2-__400_DBR0,gr12 setlos.p #__400_DBR3-__400_DBR0,gr13 setlos #32,gr5 ; cacheline size setlos.p #0,gr15 ; amount to shift addr reg by setlos #0x00ff,gr4 movgs gr4,cccr ; extant DARS/DAMK regs bralr ############################################################################### # # rearrange the bus controller registers # # ENTRY: EXIT: # GR26 &__head_reference [saved] # GR30 LED address revised LED address # ############################################################################### .globl __head_fr451_set_busctl __head_fr451_set_busctl: sethi.p %hi(__400_LGCR),gr4 setlo %lo(__400_LGCR),gr4 sethi.p %hi(__400_LSBR),gr10 setlo %lo(__400_LSBR),gr10 sethi.p %hi(__400_LCR),gr11 setlo %lo(__400_LCR),gr11 # set the bus controller ldi @(gr4,#0),gr5 ori gr5,#0xff,gr5 ; make sure all chip-selects are enabled sti gr5,@(gr4,#0) sethi.p %hi(__region_CS1),gr4 setlo %lo(__region_CS1),gr4 sethi.p %hi(__region_CS1_M),gr5 setlo %lo(__region_CS1_M),gr5 sethi.p %hi(__region_CS1_C),gr6 setlo %lo(__region_CS1_C),gr6 sti gr4,@(gr10,#1*0x08) sti gr5,@(gr10,#1*0x08+0x100) sti gr6,@(gr11,#1*0x08) sethi.p %hi(__region_CS2),gr4 setlo %lo(__region_CS2),gr4 sethi.p %hi(__region_CS2_M),gr5 setlo %lo(__region_CS2_M),gr5 sethi.p %hi(__region_CS2_C),gr6 setlo %lo(__region_CS2_C),gr6 sti gr4,@(gr10,#2*0x08) sti gr5,@(gr10,#2*0x08+0x100) sti gr6,@(gr11,#2*0x08) sethi.p %hi(__region_CS3),gr4 setlo %lo(__region_CS3),gr4 sethi.p %hi(__region_CS3_M),gr5 setlo %lo(__region_CS3_M),gr5 sethi.p %hi(__region_CS3_C),gr6 setlo %lo(__region_CS3_C),gr6 sti gr4,@(gr10,#3*0x08) sti gr5,@(gr10,#3*0x08+0x100) sti gr6,@(gr11,#3*0x08) sethi.p %hi(__region_CS4),gr4 setlo %lo(__region_CS4),gr4 sethi.p %hi(__region_CS4_M),gr5 setlo %lo(__region_CS4_M),gr5 sethi.p %hi(__region_CS4_C),gr6 setlo %lo(__region_CS4_C),gr6 sti gr4,@(gr10,#4*0x08) sti gr5,@(gr10,#4*0x08+0x100) sti gr6,@(gr11,#4*0x08) sethi.p %hi(__region_CS5),gr4 setlo %lo(__region_CS5),gr4 sethi.p %hi(__region_CS5_M),gr5 setlo %lo(__region_CS5_M),gr5 sethi.p %hi(__region_CS5_C),gr6 setlo %lo(__region_CS5_C),gr6 sti gr4,@(gr10,#5*0x08) sti gr5,@(gr10,#5*0x08+0x100) sti gr6,@(gr11,#5*0x08) sethi.p %hi(__region_CS6),gr4 setlo %lo(__region_CS6),gr4 sethi.p %hi(__region_CS6_M),gr5 setlo %lo(__region_CS6_M),gr5 sethi.p %hi(__region_CS6_C),gr6 setlo %lo(__region_CS6_C),gr6 sti gr4,@(gr10,#6*0x08) sti gr5,@(gr10,#6*0x08+0x100) sti gr6,@(gr11,#6*0x08) sethi.p %hi(__region_CS7),gr4 setlo %lo(__region_CS7),gr4 sethi.p %hi(__region_CS7_M),gr5 setlo %lo(__region_CS7_M),gr5 sethi.p %hi(__region_CS7_C),gr6 setlo %lo(__region_CS7_C),gr6 sti gr4,@(gr10,#7*0x08) sti gr5,@(gr10,#7*0x08+0x100) sti gr6,@(gr11,#7*0x08) membar bar # adjust LED bank address #ifdef CONFIG_MB93091_VDK sethi.p %hi(__region_CS2 + 0x01200004),gr30 setlo %lo(__region_CS2 + 0x01200004),gr30 #endif bralr ############################################################################### # # determine the total SDRAM size # # ENTRY: EXIT: # GR25 - SDRAM size # GR26 &__head_reference [saved] # GR30 LED address [saved] # ############################################################################### .globl __head_fr451_survey_sdram __head_fr451_survey_sdram: sethi.p %hi(__400_DAM0),gr11 setlo %lo(__400_DAM0),gr11 sethi.p %hi(__400_DBR0),gr12 setlo %lo(__400_DBR0),gr12 sethi.p %hi(0xfe000000),gr17 ; unused SDRAM DBR value setlo %lo(0xfe000000),gr17 setlos #0,gr25 ldi @(gr12,#0x00),gr4 ; DAR0 subcc gr4,gr17,gr0,icc0 beq icc0,#0,__head_no_DCS0 ldi @(gr11,#0x00),gr6 ; DAM0: bits 31:20 match addr 31:20 add gr25,gr6,gr25 addi gr25,#1,gr25 __head_no_DCS0: ldi @(gr12,#0x08),gr4 ; DAR1 subcc gr4,gr17,gr0,icc0 beq icc0,#0,__head_no_DCS1 ldi @(gr11,#0x08),gr6 ; DAM1: bits 31:20 match addr 31:20 add gr25,gr6,gr25 addi gr25,#1,gr25 __head_no_DCS1: ldi @(gr12,#0x10),gr4 ; DAR2 subcc gr4,gr17,gr0,icc0 beq icc0,#0,__head_no_DCS2 ldi @(gr11,#0x10),gr6 ; DAM2: bits 31:20 match addr 31:20 add gr25,gr6,gr25 addi gr25,#1,gr25 __head_no_DCS2: ldi @(gr12,#0x18),gr4 ; DAR3 subcc gr4,gr17,gr0,icc0 beq icc0,#0,__head_no_DCS3 ldi @(gr11,#0x18),gr6 ; DAM3: bits 31:20 match addr 31:20 add gr25,gr6,gr25 addi gr25,#1,gr25 __head_no_DCS3: bralr ############################################################################### # # set the protection map with the I/DAMPR registers # # ENTRY: EXIT: # GR25 SDRAM size [saved] # GR26 &__head_reference [saved] # GR30 LED address [saved] # # # Using this map: # REGISTERS ADDRESS RANGE VIEW # =============== ====================== =============================== # IAMPR0/DAMPR0 0xC0000000-0xCFFFFFFF Cached kernel RAM Window # DAMPR11 0xE0000000-0xFFFFFFFF Uncached I/O # ############################################################################### .globl __head_fr451_set_protection __head_fr451_set_protection: movsg lr,gr27 # set the I/O region protection registers for FR451 in MMU mode #define PGPROT_IO xAMPRx_L|xAMPRx_M|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V sethi.p %hi(__region_IO),gr5 setlo %lo(__region_IO),gr5 setlos #PGPROT_IO|xAMPRx_SS_512Mb,gr4 or gr4,gr5,gr4 movgs gr5,damlr11 ; General I/O tile movgs gr4,dampr11 # need to open a window onto at least part of the RAM for the kernel's use sethi.p %hi(__sdram_base),gr8 setlo %lo(__sdram_base),gr8 ; physical address sethi.p %hi(__page_offset),gr9 setlo %lo(__page_offset),gr9 ; virtual address setlos #xAMPRx_L|xAMPRx_M|xAMPRx_SS_256Mb|xAMPRx_S_KERNEL|xAMPRx_V,gr11 or gr8,gr11,gr8 movgs gr9,iamlr0 ; mapped from real address 0 movgs gr8,iampr0 ; cached kernel memory at 0xC0000000 movgs gr9,damlr0 movgs gr8,dampr0 # set a temporary mapping for the kernel running at address 0 until we've turned on the MMU sethi.p %hi(__sdram_base),gr9 setlo %lo(__sdram_base),gr9 ; virtual address and.p gr4,gr11,gr4 and gr5,gr11,gr5 or.p gr4,gr11,gr4 or gr5,gr11,gr5 movgs gr9,iamlr1 ; mapped from real address 0 movgs gr8,iampr1 ; cached kernel memory at 0x00000000 movgs gr9,damlr1 movgs gr8,dampr1 # we use DAMR2-10 for kmap_atomic(), cache flush and TLB management # since the DAMLR regs are not going to change, we can set them now # also set up IAMLR2 to the same as DAMLR5 sethi.p %hi(KMAP_ATOMIC_PRIMARY_FRAME),gr4 setlo %lo(KMAP_ATOMIC_PRIMARY_FRAME),gr4 sethi.p %hi(PAGE_SIZE),gr5 setlo %lo(PAGE_SIZE),gr5 movgs gr4,damlr2 movgs gr4,iamlr2 add gr4,gr5,gr4 movgs gr4,damlr3 add gr4,gr5,gr4 movgs gr4,damlr4 add gr4,gr5,gr4 movgs gr4,damlr5 add gr4,gr5,gr4 movgs gr4,damlr6 add gr4,gr5,gr4 movgs gr4,damlr7 add gr4,gr5,gr4 movgs gr4,damlr8 add gr4,gr5,gr4 movgs gr4,damlr9 add gr4,gr5,gr4 movgs gr4,damlr10 movgs gr0,dampr2 movgs gr0,dampr4 movgs gr0,dampr5 movgs gr0,dampr6 movgs gr0,dampr7 movgs gr0,dampr8 movgs gr0,dampr9 movgs gr0,dampr10 movgs gr0,iamlr3 movgs gr0,iamlr4 movgs gr0,iamlr5 movgs gr0,iamlr6 movgs gr0,iamlr7 movgs gr0,iampr2 movgs gr0,iampr3 movgs gr0,iampr4 movgs gr0,iampr5 movgs gr0,iampr6 movgs gr0,iampr7 # start in TLB context 0 with the swapper's page tables movgs gr0,cxnr sethi.p %hi(swapper_pg_dir),gr4 setlo %lo(swapper_pg_dir),gr4 sethi.p %hi(__page_offset),gr5 setlo %lo(__page_offset),gr5 sub gr4,gr5,gr4 movgs gr4,ttbr setlos #xAMPRx_L|xAMPRx_M|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V,gr5 or gr4,gr5,gr4 movgs gr4,dampr3 # the FR451 also has an extra trap base register movsg tbr,gr4 movgs gr4,btbr LEDS 0x3300 jmpl @(gr27,gr0) ############################################################################### # # finish setting up the protection registers # ############################################################################### .globl __head_fr451_finalise_protection __head_fr451_finalise_protection: # turn on the timers as appropriate movgs gr0,timerh movgs gr0,timerl movgs gr0,timerd movsg hsr0,gr4 sethi.p %hi(HSR0_ETMI),gr5 setlo %lo(HSR0_ETMI),gr5 or gr4,gr5,gr4 movgs gr4,hsr0 # clear the TLB entry cache movgs gr0,iamlr1 movgs gr0,iampr1 movgs gr0,damlr1 movgs gr0,dampr1 # clear the PGE cache sethi.p %hi(__flush_tlb_all),gr4 setlo %lo(__flush_tlb_all),gr4 jmpl @(gr4,gr0)