/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/ioport.h> #include <linux/timer.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/delay.h> #include <linux/pci.h> #include <linux/gpio.h> #include <bcm63xx_regs.h> #include <bcm63xx_io.h> #include "bcm63xx_pcmcia.h" #define PFX "bcm63xx_pcmcia: " #ifdef CONFIG_CARDBUS /* if cardbus is used, platform device needs reference to actual pci * device */ static struct pci_dev *bcm63xx_cb_dev; #endif /* * read/write helper for pcmcia regs */ static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off) { return bcm_readl(skt->base + off); } static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt, u32 val, u32 off) { bcm_writel(val, skt->base + off); } /* * This callback should (re-)initialise the socket, turn on status * interrupts and PCMCIA bus, and wait for power to stabilise so that * the card status signals report correctly. * * Hardware cannot do that. */ static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock) { return 0; } /* * This callback should remove power on the socket, disable IRQs from * the card, turn off status interrupts, and disable the PCMCIA bus. * * Hardware cannot do that. */ static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock) { return 0; } /* * Implements the set_socket() operation for the in-kernel PCMCIA * service (formerly SS_SetSocket in Card Services). We more or * less punt all of this work and let the kernel handle the details * of power configuration, reset, &c. We also record the value of * `state' in order to regurgitate it to the PCMCIA core later. */ static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state) { struct bcm63xx_pcmcia_socket *skt; unsigned long flags; u32 val; skt = sock->driver_data; spin_lock_irqsave(&skt->lock, flags); /* note: hardware cannot control socket power, so we will * always report SS_POWERON */ /* apply socket reset */ val = pcmcia_readl(skt, PCMCIA_C1_REG); if (state->flags & SS_RESET) val |= PCMCIA_C1_RESET_MASK; else val &= ~PCMCIA_C1_RESET_MASK; /* reverse reset logic for cardbus card */ if (skt->card_detected && (skt->card_type & CARD_CARDBUS)) val ^= PCMCIA_C1_RESET_MASK; pcmcia_writel(skt, val, PCMCIA_C1_REG); /* keep requested state for event reporting */ skt->requested_state = *state; spin_unlock_irqrestore(&skt->lock, flags); return 0; } /* * identity cardtype from VS[12] input, CD[12] input while only VS2 is * floating, and CD[12] input while only VS1 is floating */ enum { IN_VS1 = (1 << 0), IN_VS2 = (1 << 1), IN_CD1_VS2H = (1 << 2), IN_CD2_VS2H = (1 << 3), IN_CD1_VS1H = (1 << 4), IN_CD2_VS1H = (1 << 5), }; static const u8 vscd_to_cardtype[] = { /* VS1 float, VS2 float */ [IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V), /* VS1 grounded, VS2 float */ [IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V), /* VS1 grounded, VS2 grounded */ [0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV), /* VS1 tied to CD1, VS2 float */ [IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V), /* VS1 grounded, VS2 tied to CD2 */ [IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV), /* VS1 tied to CD2, VS2 grounded */ [IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV), /* VS1 float, VS2 grounded */ [IN_VS1] = (CARD_PCCARD | CARD_XV), /* VS1 float, VS2 tied to CD2 */ [IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V), /* VS1 float, VS2 tied to CD1 */ [IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV), /* VS1 tied to CD2, VS2 float */ [IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV), /* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */ [IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */ }; /* * poll hardware to check card insertion status */ static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt) { unsigned int stat; u32 val; stat = 0; /* check CD for card presence */ val = pcmcia_readl(skt, PCMCIA_C1_REG); if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK)) stat |= SS_DETECT; /* if new insertion, detect cardtype */ if ((stat & SS_DETECT) && !skt->card_detected) { unsigned int stat = 0; /* float VS1, float VS2 */ val |= PCMCIA_C1_VS1OE_MASK; val |= PCMCIA_C1_VS2OE_MASK; pcmcia_writel(skt, val, PCMCIA_C1_REG); /* wait for output to stabilize and read VS[12] */ udelay(10); val = pcmcia_readl(skt, PCMCIA_C1_REG); stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0; stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0; /* drive VS1 low, float VS2 */ val &= ~PCMCIA_C1_VS1OE_MASK; val |= PCMCIA_C1_VS2OE_MASK; pcmcia_writel(skt, val, PCMCIA_C1_REG); /* wait for output to stabilize and read CD[12] */ udelay(10); val = pcmcia_readl(skt, PCMCIA_C1_REG); stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0; stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0; /* float VS1, drive VS2 low */ val |= PCMCIA_C1_VS1OE_MASK; val &= ~PCMCIA_C1_VS2OE_MASK; pcmcia_writel(skt, val, PCMCIA_C1_REG); /* wait for output to stabilize and read CD[12] */ udelay(10); val = pcmcia_readl(skt, PCMCIA_C1_REG); stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0; stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0; /* guess cardtype from all this */ skt->card_type = vscd_to_cardtype[stat]; if (!skt->card_type) dev_err(&skt->socket.dev, "unsupported card type\n"); /* drive both VS pin to 0 again */ val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK); /* enable correct logic */ val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK); if (skt->card_type & CARD_PCCARD) val |= PCMCIA_C1_EN_PCMCIA_MASK; else val |= PCMCIA_C1_EN_CARDBUS_MASK; pcmcia_writel(skt, val, PCMCIA_C1_REG); } skt->card_detected = (stat & SS_DETECT) ? 1 : 0; /* report card type/voltage */ if (skt->card_type & CARD_CARDBUS) stat |= SS_CARDBUS; if (skt->card_type & CARD_3V) stat |= SS_3VCARD; if (skt->card_type & CARD_XV) stat |= SS_XVCARD; stat |= SS_POWERON; if (gpio_get_value(skt->pd->ready_gpio)) stat |= SS_READY; return stat; } /* * core request to get current socket status */ static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status) { struct bcm63xx_pcmcia_socket *skt; skt = sock->driver_data; spin_lock_bh(&skt->lock); *status = __get_socket_status(skt); spin_unlock_bh(&skt->lock); return 0; } /* * socket polling timer callback */ static void bcm63xx_pcmcia_poll(unsigned long data) { struct bcm63xx_pcmcia_socket *skt; unsigned int stat, events; skt = (struct bcm63xx_pcmcia_socket *)data; spin_lock_bh(&skt->lock); stat = __get_socket_status(skt); /* keep only changed bits, and mask with required one from the * core */ events = (stat ^ skt->old_status) & skt->requested_state.csc_mask; skt->old_status = stat; spin_unlock_bh(&skt->lock); if (events) pcmcia_parse_events(&skt->socket, events); mod_timer(&skt->timer, jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); } static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map) { /* this doesn't seem to be called by pcmcia layer if static * mapping is used */ return 0; } static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map) { struct bcm63xx_pcmcia_socket *skt; struct resource *res; skt = sock->driver_data; if (map->flags & MAP_ATTRIB) res = skt->attr_res; else res = skt->common_res; map->static_start = res->start + map->card_start; return 0; } static struct pccard_operations bcm63xx_pcmcia_operations = { .init = bcm63xx_pcmcia_sock_init, .suspend = bcm63xx_pcmcia_suspend, .get_status = bcm63xx_pcmcia_get_status, .set_socket = bcm63xx_pcmcia_set_socket, .set_io_map = bcm63xx_pcmcia_set_io_map, .set_mem_map = bcm63xx_pcmcia_set_mem_map, }; /* * register pcmcia socket to core */ static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev) { struct bcm63xx_pcmcia_socket *skt; struct pcmcia_socket *sock; struct resource *res, *irq_res; unsigned int regmem_size = 0, iomem_size = 0; u32 val; int ret; skt = kzalloc(sizeof(*skt), GFP_KERNEL); if (!skt) return -ENOMEM; spin_lock_init(&skt->lock); sock = &skt->socket; sock->driver_data = skt; /* make sure we have all resources we need */ skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2); irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); skt->pd = pdev->dev.platform_data; if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) { ret = -EINVAL; goto err; } /* remap pcmcia registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); regmem_size = resource_size(res); if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) { ret = -EINVAL; goto err; } skt->reg_res = res; skt->base = ioremap(res->start, regmem_size); if (!skt->base) { ret = -ENOMEM; goto err; } /* remap io registers */ res = platform_get_resource(pdev, IORESOURCE_MEM, 3); iomem_size = resource_size(res); skt->io_base = ioremap(res->start, iomem_size); if (!skt->io_base) { ret = -ENOMEM; goto err; } /* resources are static */ sock->resource_ops = &pccard_static_ops; sock->ops = &bcm63xx_pcmcia_operations; sock->owner = THIS_MODULE; sock->dev.parent = &pdev->dev; sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD; sock->io_offset = (unsigned long)skt->io_base; sock->pci_irq = irq_res->start; #ifdef CONFIG_CARDBUS sock->cb_dev = bcm63xx_cb_dev; if (bcm63xx_cb_dev) sock->features |= SS_CAP_CARDBUS; #endif /* assume common & attribute memory have the same size */ sock->map_size = resource_size(skt->common_res); /* initialize polling timer */ setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt); /* initialize pcmcia control register, drive VS[12] to 0, * leave CB IDSEL to the old value since it is set by the PCI * layer */ val = pcmcia_readl(skt, PCMCIA_C1_REG); val &= PCMCIA_C1_CBIDSEL_MASK; val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK; pcmcia_writel(skt, val, PCMCIA_C1_REG); /* * Hardware has only one set of timings registers, not one for * each memory access type, so we configure them for the * slowest one: attribute memory. */ val = PCMCIA_C2_DATA16_MASK; val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT; val |= 6 << PCMCIA_C2_INACTIVE_SHIFT; val |= 3 << PCMCIA_C2_SETUP_SHIFT; val |= 3 << PCMCIA_C2_HOLD_SHIFT; pcmcia_writel(skt, val, PCMCIA_C2_REG); ret = pcmcia_register_socket(sock); if (ret) goto err; /* start polling socket */ mod_timer(&skt->timer, jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); platform_set_drvdata(pdev, skt); return 0; err: if (skt->io_base) iounmap(skt->io_base); if (skt->base) iounmap(skt->base); if (skt->reg_res) release_mem_region(skt->reg_res->start, regmem_size); kfree(skt); return ret; } static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev) { struct bcm63xx_pcmcia_socket *skt; struct resource *res; skt = platform_get_drvdata(pdev); del_timer_sync(&skt->timer); iounmap(skt->base); iounmap(skt->io_base); res = skt->reg_res; release_mem_region(res->start, resource_size(res)); kfree(skt); return 0; } struct platform_driver bcm63xx_pcmcia_driver = { .probe = bcm63xx_drv_pcmcia_probe, .remove = __devexit_p(bcm63xx_drv_pcmcia_remove), .driver = { .name = "bcm63xx_pcmcia", .owner = THIS_MODULE, }, }; #ifdef CONFIG_CARDBUS static int __devinit bcm63xx_cb_probe(struct pci_dev *dev, const struct pci_device_id *id) { /* keep pci device */ bcm63xx_cb_dev = dev; return platform_driver_register(&bcm63xx_pcmcia_driver); } static void __devexit bcm63xx_cb_exit(struct pci_dev *dev) { platform_driver_unregister(&bcm63xx_pcmcia_driver); bcm63xx_cb_dev = NULL; } static struct pci_device_id bcm63xx_cb_table[] = { { .vendor = PCI_VENDOR_ID_BROADCOM, .device = BCM6348_CPU_ID, .subvendor = PCI_VENDOR_ID_BROADCOM, .subdevice = PCI_ANY_ID, .class = PCI_CLASS_BRIDGE_CARDBUS << 8, .class_mask = ~0, }, { .vendor = PCI_VENDOR_ID_BROADCOM, .device = BCM6358_CPU_ID, .subvendor = PCI_VENDOR_ID_BROADCOM, .subdevice = PCI_ANY_ID, .class = PCI_CLASS_BRIDGE_CARDBUS << 8, .class_mask = ~0, }, { }, }; MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table); static struct pci_driver bcm63xx_cardbus_driver = { .name = "bcm63xx_cardbus", .id_table = bcm63xx_cb_table, .probe = bcm63xx_cb_probe, .remove = __devexit_p(bcm63xx_cb_exit), }; #endif /* * if cardbus support is enabled, register our platform device after * our fake cardbus bridge has been registered */ static int __init bcm63xx_pcmcia_init(void) { #ifdef CONFIG_CARDBUS return pci_register_driver(&bcm63xx_cardbus_driver); #else return platform_driver_register(&bcm63xx_pcmcia_driver); #endif } static void __exit bcm63xx_pcmcia_exit(void) { #ifdef CONFIG_CARDBUS return pci_unregister_driver(&bcm63xx_cardbus_driver); #else platform_driver_unregister(&bcm63xx_pcmcia_driver); #endif } module_init(bcm63xx_pcmcia_init); module_exit(bcm63xx_pcmcia_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>"); MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller");