/***********************license start***************
* Author: Cavium Networks
*
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
* Copyright (c) 2003-2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this file; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* or visit http://www.gnu.org/licenses/.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium Networks for more information
***********************license end**************************************/
/*
* Functions for XAUI initialization, configuration,
* and monitoring.
*
*/
#include <asm/octeon/octeon.h>
#include "cvmx-config.h"
#include "cvmx-helper.h"
#include "cvmx-pko-defs.h"
#include "cvmx-gmxx-defs.h"
#include "cvmx-pcsxx-defs.h"
void __cvmx_interrupt_gmxx_enable(int interface);
void __cvmx_interrupt_pcsx_intx_en_reg_enable(int index, int block);
void __cvmx_interrupt_pcsxx_int_en_reg_enable(int index);
/**
* Probe a XAUI interface and determine the number of ports
* connected to it. The XAUI interface should still be down
* after this call.
*
* @interface: Interface to probe
*
* Returns Number of ports on the interface. Zero to disable.
*/
int __cvmx_helper_xaui_probe(int interface)
{
int i;
union cvmx_gmxx_hg2_control gmx_hg2_control;
union cvmx_gmxx_inf_mode mode;
/*
* Due to errata GMX-700 on CN56XXp1.x and CN52XXp1.x, the
* interface needs to be enabled before IPD otherwise per port
* backpressure may not work properly.
*/
mode.u64 = cvmx_read_csr(CVMX_GMXX_INF_MODE(interface));
mode.s.en = 1;
cvmx_write_csr(CVMX_GMXX_INF_MODE(interface), mode.u64);
__cvmx_helper_setup_gmx(interface, 1);
/*
* Setup PKO to support 16 ports for HiGig2 virtual
* ports. We're pointing all of the PKO packet ports for this
* interface to the XAUI. This allows us to use HiGig2
* backpressure per port.
*/
for (i = 0; i < 16; i++) {
union cvmx_pko_mem_port_ptrs pko_mem_port_ptrs;
pko_mem_port_ptrs.u64 = 0;
/*
* We set each PKO port to have equal priority in a
* round robin fashion.
*/
pko_mem_port_ptrs.s.static_p = 0;
pko_mem_port_ptrs.s.qos_mask = 0xff;
/* All PKO ports map to the same XAUI hardware port */
pko_mem_port_ptrs.s.eid = interface * 4;
pko_mem_port_ptrs.s.pid = interface * 16 + i;
cvmx_write_csr(CVMX_PKO_MEM_PORT_PTRS, pko_mem_port_ptrs.u64);
}
/* If HiGig2 is enabled return 16 ports, otherwise return 1 port */
gmx_hg2_control.u64 = cvmx_read_csr(CVMX_GMXX_HG2_CONTROL(interface));
if (gmx_hg2_control.s.hg2tx_en)
return 16;
else
return 1;
}
/**
* Bringup and enable a XAUI interface. After this call packet
* I/O should be fully functional. This is called with IPD
* enabled but PKO disabled.
*
* @interface: Interface to bring up
*
* Returns Zero on success, negative on failure
*/
int __cvmx_helper_xaui_enable(int interface)
{
union cvmx_gmxx_prtx_cfg gmx_cfg;
union cvmx_pcsxx_control1_reg xauiCtl;
union cvmx_pcsxx_misc_ctl_reg xauiMiscCtl;
union cvmx_gmxx_tx_xaui_ctl gmxXauiTxCtl;
union cvmx_gmxx_rxx_int_en gmx_rx_int_en;
union cvmx_gmxx_tx_int_en gmx_tx_int_en;
union cvmx_pcsxx_int_en_reg pcsx_int_en_reg;
/* (1) Interface has already been enabled. */
/* (2) Disable GMX. */
xauiMiscCtl.u64 = cvmx_read_csr(CVMX_PCSXX_MISC_CTL_REG(interface));
xauiMiscCtl.s.gmxeno = 1;
cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64);
/* (3) Disable GMX and PCSX interrupts. */
gmx_rx_int_en.u64 = cvmx_read_csr(CVMX_GMXX_RXX_INT_EN(0, interface));
cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), 0x0);
gmx_tx_int_en.u64 = cvmx_read_csr(CVMX_GMXX_TX_INT_EN(interface));
cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), 0x0);
pcsx_int_en_reg.u64 = cvmx_read_csr(CVMX_PCSXX_INT_EN_REG(interface));
cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), 0x0);
/* (4) Bring up the PCSX and GMX reconciliation layer. */
/* (4)a Set polarity and lane swapping. */
/* (4)b */
gmxXauiTxCtl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface));
/* Enable better IFG packing and improves performance */
gmxXauiTxCtl.s.dic_en = 1;
gmxXauiTxCtl.s.uni_en = 0;
cvmx_write_csr(CVMX_GMXX_TX_XAUI_CTL(interface), gmxXauiTxCtl.u64);
/* (4)c Aply reset sequence */
xauiCtl.u64 = cvmx_read_csr(CVMX_PCSXX_CONTROL1_REG(interface));
xauiCtl.s.lo_pwr = 0;
xauiCtl.s.reset = 1;
cvmx_write_csr(CVMX_PCSXX_CONTROL1_REG(interface), xauiCtl.u64);
/* Wait for PCS to come out of reset */
if (CVMX_WAIT_FOR_FIELD64
(CVMX_PCSXX_CONTROL1_REG(interface), union cvmx_pcsxx_control1_reg,
reset, ==, 0, 10000))
return -1;
/* Wait for PCS to be aligned */
if (CVMX_WAIT_FOR_FIELD64
(CVMX_PCSXX_10GBX_STATUS_REG(interface),
union cvmx_pcsxx_10gbx_status_reg, alignd, ==, 1, 10000))
return -1;
/* Wait for RX to be ready */
if (CVMX_WAIT_FOR_FIELD64
(CVMX_GMXX_RX_XAUI_CTL(interface), union cvmx_gmxx_rx_xaui_ctl,
status, ==, 0, 10000))
return -1;
/* (6) Configure GMX */
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface));
gmx_cfg.s.en = 0;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64);
/* Wait for GMX RX to be idle */
if (CVMX_WAIT_FOR_FIELD64
(CVMX_GMXX_PRTX_CFG(0, interface), union cvmx_gmxx_prtx_cfg,
rx_idle, ==, 1, 10000))
return -1;
/* Wait for GMX TX to be idle */
if (CVMX_WAIT_FOR_FIELD64
(CVMX_GMXX_PRTX_CFG(0, interface), union cvmx_gmxx_prtx_cfg,
tx_idle, ==, 1, 10000))
return -1;
/* GMX configure */
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface));
gmx_cfg.s.speed = 1;
gmx_cfg.s.speed_msb = 0;
gmx_cfg.s.slottime = 1;
cvmx_write_csr(CVMX_GMXX_TX_PRTS(interface), 1);
cvmx_write_csr(CVMX_GMXX_TXX_SLOT(0, interface), 512);
cvmx_write_csr(CVMX_GMXX_TXX_BURST(0, interface), 8192);
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64);
/* (7) Clear out any error state */
cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(0, interface),
cvmx_read_csr(CVMX_GMXX_RXX_INT_REG(0, interface)));
cvmx_write_csr(CVMX_GMXX_TX_INT_REG(interface),
cvmx_read_csr(CVMX_GMXX_TX_INT_REG(interface)));
cvmx_write_csr(CVMX_PCSXX_INT_REG(interface),
cvmx_read_csr(CVMX_PCSXX_INT_REG(interface)));
/* Wait for receive link */
if (CVMX_WAIT_FOR_FIELD64
(CVMX_PCSXX_STATUS1_REG(interface), union cvmx_pcsxx_status1_reg,
rcv_lnk, ==, 1, 10000))
return -1;
if (CVMX_WAIT_FOR_FIELD64
(CVMX_PCSXX_STATUS2_REG(interface), union cvmx_pcsxx_status2_reg,
xmtflt, ==, 0, 10000))
return -1;
if (CVMX_WAIT_FOR_FIELD64
(CVMX_PCSXX_STATUS2_REG(interface), union cvmx_pcsxx_status2_reg,
rcvflt, ==, 0, 10000))
return -1;
cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), gmx_rx_int_en.u64);
cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), gmx_tx_int_en.u64);
cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), pcsx_int_en_reg.u64);
cvmx_helper_link_autoconf(cvmx_helper_get_ipd_port(interface, 0));
/* (8) Enable packet reception */
xauiMiscCtl.s.gmxeno = 0;
cvmx_write_csr(CVMX_PCSXX_MISC_CTL_REG(interface), xauiMiscCtl.u64);
gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(0, interface));
gmx_cfg.s.en = 1;
cvmx_write_csr(CVMX_GMXX_PRTX_CFG(0, interface), gmx_cfg.u64);
__cvmx_interrupt_pcsx_intx_en_reg_enable(0, interface);
__cvmx_interrupt_pcsx_intx_en_reg_enable(1, interface);
__cvmx_interrupt_pcsx_intx_en_reg_enable(2, interface);
__cvmx_interrupt_pcsx_intx_en_reg_enable(3, interface);
__cvmx_interrupt_pcsxx_int_en_reg_enable(interface);
__cvmx_interrupt_gmxx_enable(interface);
return 0;
}
/**
* Return the link state of an IPD/PKO port as returned by
* auto negotiation. The result of this function may not match
* Octeon's link config if auto negotiation has changed since
* the last call to cvmx_helper_link_set().
*
* @ipd_port: IPD/PKO port to query
*
* Returns Link state
*/
cvmx_helper_link_info_t __cvmx_helper_xaui_link_get(int ipd_port)
{
int interface = cvmx_helper_get_interface_num(ipd_port);
union cvmx_gmxx_tx_xaui_ctl gmxx_tx_xaui_ctl;
union cvmx_gmxx_rx_xaui_ctl gmxx_rx_xaui_ctl;
union cvmx_pcsxx_status1_reg pcsxx_status1_reg;
cvmx_helper_link_info_t result;
gmxx_tx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface));
gmxx_rx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RX_XAUI_CTL(interface));
pcsxx_status1_reg.u64 =
cvmx_read_csr(CVMX_PCSXX_STATUS1_REG(interface));
result.u64 = 0;
/* Only return a link if both RX and TX are happy */
if ((gmxx_tx_xaui_ctl.s.ls == 0) && (gmxx_rx_xaui_ctl.s.status == 0) &&
(pcsxx_status1_reg.s.rcv_lnk == 1)) {
result.s.link_up = 1;
result.s.full_duplex = 1;
result.s.speed = 10000;
} else {
/* Disable GMX and PCSX interrupts. */
cvmx_write_csr(CVMX_GMXX_RXX_INT_EN(0, interface), 0x0);
cvmx_write_csr(CVMX_GMXX_TX_INT_EN(interface), 0x0);
cvmx_write_csr(CVMX_PCSXX_INT_EN_REG(interface), 0x0);
}
return result;
}
/**
* Configure an IPD/PKO port for the specified link state. This
* function does not influence auto negotiation at the PHY level.
* The passed link state must always match the link state returned
* by cvmx_helper_link_get(). It is normally best to use
* cvmx_helper_link_autoconf() instead.
*
* @ipd_port: IPD/PKO port to configure
* @link_info: The new link state
*
* Returns Zero on success, negative on failure
*/
int __cvmx_helper_xaui_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
{
int interface = cvmx_helper_get_interface_num(ipd_port);
union cvmx_gmxx_tx_xaui_ctl gmxx_tx_xaui_ctl;
union cvmx_gmxx_rx_xaui_ctl gmxx_rx_xaui_ctl;
gmxx_tx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_TX_XAUI_CTL(interface));
gmxx_rx_xaui_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RX_XAUI_CTL(interface));
/* If the link shouldn't be up, then just return */
if (!link_info.s.link_up)
return 0;
/* Do nothing if both RX and TX are happy */
if ((gmxx_tx_xaui_ctl.s.ls == 0) && (gmxx_rx_xaui_ctl.s.status == 0))
return 0;
/* Bring the link up */
return __cvmx_helper_xaui_enable(interface);
}
/**
* Configure a port for internal and/or external loopback. Internal loopback
* causes packets sent by the port to be received by Octeon. External loopback
* causes packets received from the wire to sent out again.
*
* @ipd_port: IPD/PKO port to loopback.
* @enable_internal:
* Non zero if you want internal loopback
* @enable_external:
* Non zero if you want external loopback
*
* Returns Zero on success, negative on failure.
*/
extern int __cvmx_helper_xaui_configure_loopback(int ipd_port,
int enable_internal,
int enable_external)
{
int interface = cvmx_helper_get_interface_num(ipd_port);
union cvmx_pcsxx_control1_reg pcsxx_control1_reg;
union cvmx_gmxx_xaui_ext_loopback gmxx_xaui_ext_loopback;
/* Set the internal loop */
pcsxx_control1_reg.u64 =
cvmx_read_csr(CVMX_PCSXX_CONTROL1_REG(interface));
pcsxx_control1_reg.s.loopbck1 = enable_internal;
cvmx_write_csr(CVMX_PCSXX_CONTROL1_REG(interface),
pcsxx_control1_reg.u64);
/* Set the external loop */
gmxx_xaui_ext_loopback.u64 =
cvmx_read_csr(CVMX_GMXX_XAUI_EXT_LOOPBACK(interface));
gmxx_xaui_ext_loopback.s.en = enable_external;
cvmx_write_csr(CVMX_GMXX_XAUI_EXT_LOOPBACK(interface),
gmxx_xaui_ext_loopback.u64);
/* Take the link through a reset */
return __cvmx_helper_xaui_enable(interface);
}