/**************************************************************************************************
* Procedure: Init boot code/firmware code/data session
*
* Description: This routine will initialize firmware. If any error occurs during the initialization
* process, the routine shall terminate immediately and return fail.
* NIC driver should call NdisOpenFile only from MiniportInitialize.
*
* Arguments: The pointer of the adapter
* Returns:
* NDIS_STATUS_FAILURE - the following initialization process should be terminated
* NDIS_STATUS_SUCCESS - if firmware initialization process success
**************************************************************************************************/
#include "r8192U.h"
#include "r8192U_hw.h"
#include "r819xU_firmware_img.h"
#include "r819xU_firmware.h"
#include <linux/firmware.h>
void firmware_init_param(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
rt_firmware *pfirmware = priv->pFirmware;
pfirmware->cmdpacket_frag_thresold = GET_COMMAND_PACKET_FRAG_THRESHOLD(MAX_TRANSMIT_BUFFER_SIZE);
}
/*
* segment the img and use the ptr and length to remember info on each segment
*
*/
bool fw_download_code(struct net_device *dev, u8 *code_virtual_address, u32 buffer_len)
{
struct r8192_priv *priv = ieee80211_priv(dev);
bool rt_status = true;
u16 frag_threshold;
u16 frag_length, frag_offset = 0;
//u16 total_size;
int i;
rt_firmware *pfirmware = priv->pFirmware;
struct sk_buff *skb;
unsigned char *seg_ptr;
cb_desc *tcb_desc;
u8 bLastIniPkt;
firmware_init_param(dev);
//Fragmentation might be required
frag_threshold = pfirmware->cmdpacket_frag_thresold;
do {
if((buffer_len - frag_offset) > frag_threshold) {
frag_length = frag_threshold ;
bLastIniPkt = 0;
} else {
frag_length = buffer_len - frag_offset;
bLastIniPkt = 1;
}
/* Allocate skb buffer to contain firmware info and tx descriptor info
* add 4 to avoid packet appending overflow.
* */
#ifdef RTL8192U
skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
#else
skb = dev_alloc_skb(frag_length + 4);
#endif
memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->queue_index = TXCMD_QUEUE;
tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
tcb_desc->bLastIniPkt = bLastIniPkt;
#ifdef RTL8192U
skb_reserve(skb, USB_HWDESC_HEADER_LEN);
#endif
seg_ptr = skb->data;
/*
* Transform from little endian to big endian
* and pending zero
*/
for(i=0 ; i < frag_length; i+=4) {
*seg_ptr++ = ((i+0)<frag_length)?code_virtual_address[i+3]:0;
*seg_ptr++ = ((i+1)<frag_length)?code_virtual_address[i+2]:0;
*seg_ptr++ = ((i+2)<frag_length)?code_virtual_address[i+1]:0;
*seg_ptr++ = ((i+3)<frag_length)?code_virtual_address[i+0]:0;
}
tcb_desc->txbuf_size= (u16)i;
skb_put(skb, i);
if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
(priv->ieee80211->queue_stop) ) {
RT_TRACE(COMP_FIRMWARE,"=====================================================> tx full!\n");
skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
} else {
priv->ieee80211->softmac_hard_start_xmit(skb,dev);
}
code_virtual_address += frag_length;
frag_offset += frag_length;
}while(frag_offset < buffer_len);
return rt_status;
}
bool
fwSendNullPacket(
struct net_device *dev,
u32 Length
)
{
bool rtStatus = true;
struct r8192_priv *priv = ieee80211_priv(dev);
struct sk_buff *skb;
cb_desc *tcb_desc;
unsigned char *ptr_buf;
bool bLastInitPacket = false;
//PlatformAcquireSpinLock(Adapter, RT_TX_SPINLOCK);
//Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
skb = dev_alloc_skb(Length+ 4);
memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->queue_index = TXCMD_QUEUE;
tcb_desc->bCmdOrInit = DESC_PACKET_TYPE_INIT;
tcb_desc->bLastIniPkt = bLastInitPacket;
ptr_buf = skb_put(skb, Length);
memset(ptr_buf,0,Length);
tcb_desc->txbuf_size= (u16)Length;
if(!priv->ieee80211->check_nic_enough_desc(dev,tcb_desc->queue_index)||
(!skb_queue_empty(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index]))||\
(priv->ieee80211->queue_stop) ) {
RT_TRACE(COMP_FIRMWARE,"===================NULL packet==================================> tx full!\n");
skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
} else {
priv->ieee80211->softmac_hard_start_xmit(skb,dev);
}
//PlatformReleaseSpinLock(Adapter, RT_TX_SPINLOCK);
return rtStatus;
}
//-----------------------------------------------------------------------------
// Procedure: Check whether main code is download OK. If OK, turn on CPU
//
// Description: CPU register locates in different page against general register.
// Switch to CPU register in the begin and switch back before return
//
//
// Arguments: The pointer of the adapter
//
// Returns:
// NDIS_STATUS_FAILURE - the following initialization process should be terminated
// NDIS_STATUS_SUCCESS - if firmware initialization process success
//-----------------------------------------------------------------------------
bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev)
{
bool rt_status = true;
int check_putcodeOK_time = 200000, check_bootOk_time = 200000;
u32 CPU_status = 0;
/* Check whether put code OK */
do {
CPU_status = read_nic_dword(dev, CPU_GEN);
if(CPU_status&CPU_GEN_PUT_CODE_OK)
break;
}while(check_putcodeOK_time--);
if(!(CPU_status&CPU_GEN_PUT_CODE_OK)) {
RT_TRACE(COMP_ERR, "Download Firmware: Put code fail!\n");
goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
} else {
RT_TRACE(COMP_FIRMWARE, "Download Firmware: Put code ok!\n");
}
/* Turn On CPU */
CPU_status = read_nic_dword(dev, CPU_GEN);
write_nic_byte(dev, CPU_GEN, (u8)((CPU_status|CPU_GEN_PWR_STB_CPU)&0xff));
mdelay(1000);
/* Check whether CPU boot OK */
do {
CPU_status = read_nic_dword(dev, CPU_GEN);
if(CPU_status&CPU_GEN_BOOT_RDY)
break;
}while(check_bootOk_time--);
if(!(CPU_status&CPU_GEN_BOOT_RDY)) {
goto CPUCheckMainCodeOKAndTurnOnCPU_Fail;
} else {
RT_TRACE(COMP_FIRMWARE, "Download Firmware: Boot ready!\n");
}
return rt_status;
CPUCheckMainCodeOKAndTurnOnCPU_Fail:
RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
rt_status = FALSE;
return rt_status;
}
bool CPUcheck_firmware_ready(struct net_device *dev)
{
bool rt_status = true;
int check_time = 200000;
u32 CPU_status = 0;
/* Check Firmware Ready */
do {
CPU_status = read_nic_dword(dev, CPU_GEN);
if(CPU_status&CPU_GEN_FIRM_RDY)
break;
}while(check_time--);
if(!(CPU_status&CPU_GEN_FIRM_RDY))
goto CPUCheckFirmwareReady_Fail;
else
RT_TRACE(COMP_FIRMWARE, "Download Firmware: Firmware ready!\n");
return rt_status;
CPUCheckFirmwareReady_Fail:
RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
rt_status = false;
return rt_status;
}
bool init_firmware(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
bool rt_status = TRUE;
u32 file_length = 0;
u8 *mapped_file = NULL;
u32 init_step = 0;
opt_rst_type_e rst_opt = OPT_SYSTEM_RESET;
firmware_init_step_e starting_state = FW_INIT_STEP0_BOOT;
rt_firmware *pfirmware = priv->pFirmware;
const struct firmware *fw_entry;
const char *fw_name[3] = { "RTL8192U/boot.img",
"RTL8192U/main.img",
"RTL8192U/data.img"};
int rc;
RT_TRACE(COMP_FIRMWARE, " PlatformInitFirmware()==>\n");
if (pfirmware->firmware_status == FW_STATUS_0_INIT ) {
/* it is called by reset */
rst_opt = OPT_SYSTEM_RESET;
starting_state = FW_INIT_STEP0_BOOT;
// TODO: system reset
}else if(pfirmware->firmware_status == FW_STATUS_5_READY) {
/* it is called by Initialize */
rst_opt = OPT_FIRMWARE_RESET;
starting_state = FW_INIT_STEP2_DATA;
}else {
RT_TRACE(COMP_FIRMWARE, "PlatformInitFirmware: undefined firmware state\n");
}
/*
* Download boot, main, and data image for System reset.
* Download data image for firmware reseta
*/
for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) {
/*
* Open Image file, and map file to contineous memory if open file success.
* or read image file from array. Default load from IMG file
*/
if(rst_opt == OPT_SYSTEM_RESET) {
rc = request_firmware(&fw_entry, fw_name[init_step],&priv->udev->dev);
if(rc < 0 ) {
RT_TRACE(COMP_ERR, "request firmware fail!\n");
goto download_firmware_fail;
}
if(fw_entry->size > sizeof(pfirmware->firmware_buf)) {
RT_TRACE(COMP_ERR, "img file size exceed the container buffer fail!\n");
goto download_firmware_fail;
}
if(init_step != FW_INIT_STEP1_MAIN) {
memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size);
mapped_file = pfirmware->firmware_buf;
file_length = fw_entry->size;
} else {
#ifdef RTL8190P
memcpy(pfirmware->firmware_buf,fw_entry->data,fw_entry->size);
mapped_file = pfirmware->firmware_buf;
file_length = fw_entry->size;
#else
memset(pfirmware->firmware_buf,0,128);
memcpy(&pfirmware->firmware_buf[128],fw_entry->data,fw_entry->size);
mapped_file = pfirmware->firmware_buf;
file_length = fw_entry->size + 128;
#endif
}
pfirmware->firmware_buf_size = file_length;
}else if(rst_opt == OPT_FIRMWARE_RESET ) {
/* we only need to download data.img here */
mapped_file = pfirmware->firmware_buf;
file_length = pfirmware->firmware_buf_size;
}
/* Download image file */
/* The firmware download process is just as following,
* 1. that is each packet will be segmented and inserted to the wait queue.
* 2. each packet segment will be put in the skb_buff packet.
* 3. each skb_buff packet data content will already include the firmware info
* and Tx descriptor info
* */
rt_status = fw_download_code(dev,mapped_file,file_length);
if(rst_opt == OPT_SYSTEM_RESET) {
release_firmware(fw_entry);
}
if(rt_status != TRUE) {
goto download_firmware_fail;
}
switch(init_step) {
case FW_INIT_STEP0_BOOT:
/* Download boot
* initialize command descriptor.
* will set polling bit when firmware code is also configured
*/
pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
#ifdef RTL8190P
// To initialize IMEM, CPU move code from 0x80000080, hence, we send 0x80 byte packet
rt_status = fwSendNullPacket(dev, RTL8190_CPU_START_OFFSET);
if(rt_status != true)
{
RT_TRACE(COMP_INIT, "fwSendNullPacket() fail ! \n");
goto download_firmware_fail;
}
#endif
//mdelay(1000);
/*
* To initialize IMEM, CPU move code from 0x80000080,
* hence, we send 0x80 byte packet
*/
break;
case FW_INIT_STEP1_MAIN:
/* Download firmware code. Wait until Boot Ready and Turn on CPU */
pfirmware->firmware_status = FW_STATUS_2_MOVE_MAIN_CODE;
/* Check Put Code OK and Turn On CPU */
rt_status = CPUcheck_maincodeok_turnonCPU(dev);
if(rt_status != TRUE) {
RT_TRACE(COMP_ERR, "CPUcheck_maincodeok_turnonCPU fail!\n");
goto download_firmware_fail;
}
pfirmware->firmware_status = FW_STATUS_3_TURNON_CPU;
break;
case FW_INIT_STEP2_DATA:
/* download initial data code */
pfirmware->firmware_status = FW_STATUS_4_MOVE_DATA_CODE;
mdelay(1);
rt_status = CPUcheck_firmware_ready(dev);
if(rt_status != TRUE) {
RT_TRACE(COMP_ERR, "CPUcheck_firmware_ready fail(%d)!\n",rt_status);
goto download_firmware_fail;
}
/* wait until data code is initialized ready.*/
pfirmware->firmware_status = FW_STATUS_5_READY;
break;
}
}
RT_TRACE(COMP_FIRMWARE, "Firmware Download Success\n");
//assert(pfirmware->firmware_status == FW_STATUS_5_READY, ("Firmware Download Fail\n"));
return rt_status;
download_firmware_fail:
RT_TRACE(COMP_ERR, "ERR in %s()\n", __FUNCTION__);
rt_status = FALSE;
return rt_status;
}