/* * Copyright (c) 2001-2002 by David Brownell * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software Foundation, * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __LINUX_USB_EHCI_DEF_H #define __LINUX_USB_EHCI_DEF_H /* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ /* Section 2.2 Host Controller Capability Registers */ struct ehci_caps { /* these fields are specified as 8 and 16 bit registers, * but some hosts can't perform 8 or 16 bit PCI accesses. */ u32 hc_capbase; #define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ #define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ u32 hcs_params; /* HCSPARAMS - offset 0x4 */ #define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ #define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ #define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ #define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ #define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ #define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ #define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ u32 hcc_params; /* HCCPARAMS - offset 0x8 */ /* EHCI 1.1 addendum */ #define HCC_32FRAME_PERIODIC_LIST(p) ((p)&(1 << 19)) #define HCC_PER_PORT_CHANGE_EVENT(p) ((p)&(1 << 18)) #define HCC_LPM(p) ((p)&(1 << 17)) #define HCC_HW_PREFETCH(p) ((p)&(1 << 16)) #define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ #define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ #define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ #define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ #define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ u8 portroute[8]; /* nibbles for routing - offset 0xC */ } __attribute__ ((packed)); /* Section 2.3 Host Controller Operational Registers */ struct ehci_regs { /* USBCMD: offset 0x00 */ u32 command; /* EHCI 1.1 addendum */ #define CMD_HIRD (0xf<<24) /* host initiated resume duration */ #define CMD_PPCEE (1<<15) /* per port change event enable */ #define CMD_FSP (1<<14) /* fully synchronized prefetch */ #define CMD_ASPE (1<<13) /* async schedule prefetch enable */ #define CMD_PSPE (1<<12) /* periodic schedule prefetch enable */ /* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ #define CMD_PARK (1<<11) /* enable "park" on async qh */ #define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ #define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ #define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ #define CMD_ASE (1<<5) /* async schedule enable */ #define CMD_PSE (1<<4) /* periodic schedule enable */ /* 3:2 is periodic frame list size */ #define CMD_RESET (1<<1) /* reset HC not bus */ #define CMD_RUN (1<<0) /* start/stop HC */ /* USBSTS: offset 0x04 */ u32 status; #define STS_PPCE_MASK (0xff<<16) /* Per-Port change event 1-16 */ #define STS_ASS (1<<15) /* Async Schedule Status */ #define STS_PSS (1<<14) /* Periodic Schedule Status */ #define STS_RECL (1<<13) /* Reclamation */ #define STS_HALT (1<<12) /* Not running (any reason) */ /* some bits reserved */ /* these STS_* flags are also intr_enable bits (USBINTR) */ #define STS_IAA (1<<5) /* Interrupted on async advance */ #define STS_FATAL (1<<4) /* such as some PCI access errors */ #define STS_FLR (1<<3) /* frame list rolled over */ #define STS_PCD (1<<2) /* port change detect */ #define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ #define STS_INT (1<<0) /* "normal" completion (short, ...) */ /* USBINTR: offset 0x08 */ u32 intr_enable; /* FRINDEX: offset 0x0C */ u32 frame_index; /* current microframe number */ /* CTRLDSSEGMENT: offset 0x10 */ u32 segment; /* address bits 63:32 if needed */ /* PERIODICLISTBASE: offset 0x14 */ u32 frame_list; /* points to periodic list */ /* ASYNCLISTADDR: offset 0x18 */ u32 async_next; /* address of next async queue head */ u32 reserved[9]; /* CONFIGFLAG: offset 0x40 */ u32 configured_flag; #define FLAG_CF (1<<0) /* true: we'll support "high speed" */ /* PORTSC: offset 0x44 */ u32 port_status[0]; /* up to N_PORTS */ /* EHCI 1.1 addendum */ #define PORTSC_SUSPEND_STS_ACK 0 #define PORTSC_SUSPEND_STS_NYET 1 #define PORTSC_SUSPEND_STS_STALL 2 #define PORTSC_SUSPEND_STS_ERR 3 #define PORT_DEV_ADDR (0x7f<<25) /* device address */ #define PORT_SSTS (0x3<<23) /* suspend status */ /* 31:23 reserved */ #define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ #define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ #define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ /* 19:16 for port testing */ #define PORT_TEST(x) (((x)&0xf)<<16) /* Port Test Control */ #define PORT_TEST_PKT PORT_TEST(0x4) /* Port Test Control - packet test */ #define PORT_TEST_FORCE PORT_TEST(0x5) /* Port Test Control - force enable */ #define PORT_LED_OFF (0<<14) #define PORT_LED_AMBER (1<<14) #define PORT_LED_GREEN (2<<14) #define PORT_LED_MASK (3<<14) #define PORT_OWNER (1<<13) /* true: companion hc owns this port */ #define PORT_POWER (1<<12) /* true: has power (see PPC) */ #define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */ /* 11:10 for detecting lowspeed devices (reset vs release ownership) */ /* 9 reserved */ #define PORT_LPM (1<<9) /* LPM transaction */ #define PORT_RESET (1<<8) /* reset port */ #define PORT_SUSPEND (1<<7) /* suspend port */ #define PORT_RESUME (1<<6) /* resume it */ #define PORT_OCC (1<<5) /* over current change */ #define PORT_OC (1<<4) /* over current active */ #define PORT_PEC (1<<3) /* port enable change */ #define PORT_PE (1<<2) /* port enable */ #define PORT_CSC (1<<1) /* connect status change */ #define PORT_CONNECT (1<<0) /* device connected */ #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) } __attribute__ ((packed)); #define USBMODE 0x68 /* USB Device mode */ #define USBMODE_SDIS (1<<3) /* Stream disable */ #define USBMODE_BE (1<<2) /* BE/LE endianness select */ #define USBMODE_CM_HC (3<<0) /* host controller mode */ #define USBMODE_CM_IDLE (0<<0) /* idle state */ /* Moorestown has some non-standard registers, partially due to the fact that * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to * PORTSCx */ #define HOSTPC0 0x84 /* HOSTPC extension */ #define HOSTPC_PHCD (1<<22) /* Phy clock disable */ #define HOSTPC_PSPD (3<<25) /* Port speed detection */ #define USBMODE_EX 0xc8 /* USB Device mode extension */ #define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */ #define USBMODE_EX_HC (3<<0) /* host controller mode */ #define TXFILLTUNING 0x24 /* TX FIFO Tuning register */ #define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ /* Appendix C, Debug port ... intended for use with special "debug devices" * that can help if there's no serial console. (nonstandard enumeration.) */ struct ehci_dbg_port { u32 control; #define DBGP_OWNER (1<<30) #define DBGP_ENABLED (1<<28) #define DBGP_DONE (1<<16) #define DBGP_INUSE (1<<10) #define DBGP_ERRCODE(x) (((x)>>7)&0x07) # define DBGP_ERR_BAD 1 # define DBGP_ERR_SIGNAL 2 #define DBGP_ERROR (1<<6) #define DBGP_GO (1<<5) #define DBGP_OUT (1<<4) #define DBGP_LEN(x) (((x)>>0)&0x0f) u32 pids; #define DBGP_PID_GET(x) (((x)>>16)&0xff) #define DBGP_PID_SET(data, tok) (((data)<<8)|(tok)) u32 data03; u32 data47; u32 address; #define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) } __attribute__ ((packed)); #ifdef CONFIG_EARLY_PRINTK_DBGP #include <linux/init.h> extern int __init early_dbgp_init(char *s); extern struct console early_dbgp_console; #endif /* CONFIG_EARLY_PRINTK_DBGP */ #ifdef CONFIG_EARLY_PRINTK_DBGP /* Call backs from ehci host driver to ehci debug driver */ extern int dbgp_external_startup(void); extern int dbgp_reset_prep(void); #else static inline int dbgp_reset_prep(void) { return 1; } static inline int dbgp_external_startup(void) { return -1; } #endif #endif /* __LINUX_USB_EHCI_DEF_H */